6 #include <simgear/debug/logstream.hxx>
7 #include <simgear/math/sg_geodesy.hxx>
8 #include <simgear/misc/sg_path.hxx>
9 #include <simgear/scene/model/placement.hxx>
10 #include <simgear/xml/easyxml.hxx>
12 #include <Main/globals.hxx>
13 #include <Main/fg_props.hxx>
16 #include "Atmosphere.hpp"
18 #include "Airplane.hpp"
20 #include "Integrator.hpp"
24 #include "Launchbar.hpp"
25 #include "FGGround.hpp"
26 #include "PropEngine.hpp"
27 #include "PistonEngine.hpp"
31 using namespace yasim;
33 static const float YASIM_PI = 3.14159265358979323846;
34 static const float RAD2DEG = 180/YASIM_PI;
35 static const float PI2 = YASIM_PI*2;
36 static const float RAD2RPM = 9.54929658551;
37 static const float M2FT = 3.2808399;
38 static const float FT2M = 0.3048;
39 static const float MPS2KTS = 3600.0/1852.0;
40 static const float CM2GALS = 264.172037284; // gallons/cubic meter
41 static const float KG2LBS = 2.20462262185;
42 static const float W2HP = 1.3416e-3;
43 static const float INHG2PA = 3386.389;
44 static const float SLUG2KG = 14.59390;
46 YASim::YASim(double dt) :
54 _fdm->getAirplane()->getModel()->setGroundCallback( new FGGround(this) );
55 _fdm->getAirplane()->getModel()->getIntegrator()->setInterval(_dt);
65 Airplane* a = _fdm->getAirplane();
67 float aoa = a->getCruiseAoA() * RAD2DEG;
68 float tail = -1 * a->getTailIncidence() * RAD2DEG;
69 float drag = 1000 * a->getDragCoefficient();
71 SG_LOG(SG_FLIGHT,SG_INFO,"YASim solution results:");
72 SG_LOG(SG_FLIGHT,SG_INFO," Iterations: "<<a->getSolutionIterations());
73 SG_LOG(SG_FLIGHT,SG_INFO," Drag Coefficient: "<< drag);
74 SG_LOG(SG_FLIGHT,SG_INFO," Lift Ratio: "<<a->getLiftRatio());
75 SG_LOG(SG_FLIGHT,SG_INFO," Cruise AoA: "<< aoa);
76 SG_LOG(SG_FLIGHT,SG_INFO," Tail Incidence: "<< tail);
77 SG_LOG(SG_FLIGHT,SG_INFO,"Approach Elevator: "<<a->getApproachElevator());
82 a->getModel()->getBody()->getCG(cg);
83 sprintf(buf, " CG: %.3f, %.3f, %.3f", cg[0], cg[1], cg[2]);
84 SG_LOG(SG_FLIGHT, SG_INFO, buf);
86 if(a->getFailureMsg()) {
87 SG_LOG(SG_FLIGHT, SG_ALERT, "YASim SOLUTION FAILURE:");
88 SG_LOG(SG_FLIGHT, SG_ALERT, a->getFailureMsg());
95 // Run the superclass bind to set up a bunch of property ties
98 //Torsten Dreyer: we shouldn't do this anymore because we don't set these values nomore
99 // Now UNtie the ones that we are going to set ourselves.
100 // fgUntie("/consumables/fuel/tank[0]/level-gal_us");
101 // fgUntie("/consumables/fuel/tank[1]/level-gal_us");
104 for(int i=0; i<_fdm->getAirplane()->getModel()->numThrusters(); i++) {
105 sprintf(buf, "/engines/engine[%d]/fuel-flow-gph", i); fgUntie(buf);
106 sprintf(buf, "/engines/engine[%d]/rpm", i); fgUntie(buf);
107 sprintf(buf, "/engines/engine[%d]/mp-osi", i); fgUntie(buf);
108 sprintf(buf, "/engines/engine[%d]/egt-degf", i); fgUntie(buf);
109 sprintf(buf, "/engines/engine[%d]/oil-temperature-degf", i); fgUntie(buf);
115 Airplane* a = _fdm->getAirplane();
116 Model* m = a->getModel();
121 m->setCrashed(false);
123 // Figure out the initial speed type
124 string speed_set = fgGetString("/sim/presets/speed-set", "UVW");
125 if (speed_set == "NED")
127 else if (speed_set == "UVW")
129 else if (speed_set == "knots")
131 else if (speed_set == "mach")
135 SG_LOG(SG_FLIGHT, SG_ALERT, "Unknown speed type " << speed_set);
138 // Build a filename and parse it
139 SGPath f(fgGetString("/sim/aircraft-dir"));
140 f.append(fgGetString("/sim/aero"));
142 readXML(f.str(), *_fdm);
144 // Compile it into a real airplane, and tell the user what they got
150 // Create some FG{Eng|Gear}Interface objects
152 for(i=0; i<a->numGear(); i++) {
153 Gear* g = a->getGear(i);
154 SGPropertyNode * node = fgGetNode("gear/gear", i, true);
157 node->setDoubleValue("xoffset-in", pos[0] * M2FT * 12);
158 node->setDoubleValue("yoffset-in", pos[1] * M2FT * 12);
159 node->setDoubleValue("zoffset-in", pos[2] * M2FT * 12);
162 // Are we at ground level? If so, lift the plane up so the gear
164 double runway_altitude = get_Runway_altitude();
165 if(get_Altitude() - runway_altitude < 50) {
166 fgSetBool("/controls/gear/gear-down", false);
167 float minGearZ = 1e18;
168 for(i=0; i<a->numGear(); i++) {
169 Gear* g = a->getGear(i);
172 if(pos[2] < minGearZ)
175 _set_Altitude(runway_altitude - minGearZ*M2FT);
176 fgSetBool("/controls/gear/gear-down", true);
179 // Blank the state, and copy in ours
184 _fdm->getExternalInput();
185 _fdm->getAirplane()->initEngines();
190 void YASim::update(double dt)
195 int iterations = _calc_multiloop(dt);
197 // If we're crashed, then we don't care
198 if(_fdm->getAirplane()->getModel()->isCrashed()) {
199 if(!fgGetBool("/sim/crashed"))
200 fgSetBool("/sim/crashed", true);
204 // ground. Calculate a cartesian coordinate for the ground under
205 // us, find the (geodetic) up vector normal to the ground, then
206 // use that to find the final (radius) term of the plane equation.
207 float v[3] = { get_uBody(), get_vBody(), get_wBody() };
208 float lat = get_Latitude(); float lon = get_Longitude();
209 float alt = get_Altitude() * FT2M; double xyz[3];
210 sgGeodToCart(lat, lon, alt, xyz);
211 // build the environment cache.
212 float vr = _fdm->getVehicleRadius();
213 vr += 2.0*FT2M*dt*Math::mag3(v);
214 prepare_ground_cache_m( _simTime, _simTime + dt, xyz, vr );
216 // Track time increments.
218 = (FGGround*)_fdm->getAirplane()->getModel()->getGroundCallback();
221 for(i=0; i<iterations; i++) {
222 gr->setTimeOffset(_simTime + i*_dt);
228 // Increment the local sim time
230 gr->setTimeOffset(_simTime);
233 void YASim::copyToYASim(bool copyState)
236 double lat = get_Latitude();
237 double lon = get_Longitude();
238 float alt = get_Altitude() * FT2M;
239 float roll = get_Phi();
240 float pitch = get_Theta();
241 float hdg = get_Psi();
245 wind[0] = get_V_north_airmass() * FT2M * -1.0;
246 wind[1] = get_V_east_airmass() * FT2M * -1.0;
247 wind[2] = get_V_down_airmass() * FT2M * -1.0;
249 float pressure = fgGetFloat("/environment/pressure-inhg") * INHG2PA;
250 float temp = fgGetFloat("/environment/temperature-degc") + 273.15;
251 float dens = fgGetFloat("/environment/density-slugft3")
252 * SLUG2KG * M2FT*M2FT*M2FT;
255 Model* model = _fdm->getAirplane()->getModel();
258 Glue::xyz2nedMat(lat, lon, xyz2ned);
261 sgGeodToCart(lat, lon, alt, s.pos);
264 Glue::euler2orient(roll, pitch, hdg, s.orient);
265 Math::mmul33(s.orient, xyz2ned, s.orient);
268 string speed_set = fgGetString("/sim/presets/speed-set", "UVW");
270 bool needCopy = false;
271 switch (_speed_set) {
273 v[0] = get_V_north() * FT2M * -1.0;
274 v[1] = get_V_east() * FT2M * -1.0;
275 v[2] = get_V_down() * FT2M * -1.0;
278 v[0] = get_uBody() * FT2M;
279 v[1] = get_vBody() * FT2M;
280 v[2] = get_wBody() * FT2M;
281 Math::tmul33(s.orient, v, v);
284 v[0] = Atmosphere::spdFromVCAS(get_V_calibrated_kts()/MPS2KTS,
288 Math::tmul33(s.orient, v, v);
292 v[0] = Atmosphere::spdFromMach(get_Mach_number(), temp);
295 Math::tmul33(s.orient, v, v);
305 _speed_set = UVW; // change to this after initial setting
308 if(copyState || needCopy)
312 Math::tmul33(xyz2ned, wind, wind);
313 model->setWind(wind);
316 model->setAir(pressure, temp, dens);
318 // Query a ground plane for each gear/hook/launchbar and
319 // write that value into the corresponding class.
320 _fdm->getAirplane()->getModel()->updateGround(&s);
322 Launchbar* l = model->getLaunchbar();
324 l->setLaunchCmd(0.0<fgGetFloat("/controls/gear/catapult-launch-cmd"));
327 // All the settables:
329 // These are set below:
332 // _set_Accels_CG_Body
333 // _set_Accels_Pilot_Body
334 // _set_Accels_CG_Body_N
335 // _set_Velocities_Local
336 // _set_Velocities_Ground
337 // _set_Velocities_Wind_Body
342 // _set_V_ground_speed
344 // _set_V_calibrated_kts
352 // _set_Geodetic_Position
353 // _set_Runway_altitude
355 // Ignoring these, because they're unused:
356 // _set_Geocentric_Position
357 // _set_Geocentric_Rates
360 // _set_Earth_position_angle (WTF?)
361 // _set_Gamma_vert_rad
363 // _set_T_Local_to_Body
365 // _set_Sea_Level_Radius
367 // Externally set via the weather code:
368 // _set_Velocities_Local_Airmass
370 // _set_Static_pressure
371 // _set_Static_temperature
372 void YASim::copyFromYASim()
374 Airplane* airplane = _fdm->getAirplane();
375 Model* model = airplane->getModel();
376 State* s = model->getState();
379 double lat, lon, alt;
380 sgCartToGeod(s->pos, &lat, &lon, &alt);
381 _set_Geodetic_Position(lat, lon, alt*M2FT);
382 double groundlevel_m = get_groundlevel_m(lat, lon, alt);
383 _set_Runway_altitude(groundlevel_m*SG_METER_TO_FEET);
384 _set_Altitude_AGL((alt-groundlevel_m)*SG_METER_TO_FEET);
386 // the smallest agl of all gears
387 fgSetFloat("/position/gear-agl-m", model->getAGL());
388 fgSetFloat("/position/gear-agl-ft", model->getAGL()*M2FT);
391 //_set_Geocentric_Position(Glue::geod2geocLat(lat), lon, alt*M2FT);
393 // useful conversion matrix
395 Glue::xyz2nedMat(lat, lon, xyz2ned);
399 Math::vmul33(xyz2ned, s->v, v);
400 _set_Velocities_Local(M2FT*v[0], M2FT*v[1], M2FT*v[2]);
401 _set_V_ground_speed(Math::sqrt(M2FT*v[0]*M2FT*v[0] +
402 M2FT*v[1]*M2FT*v[1]));
403 _set_Climb_Rate(-M2FT*v[2]);
405 // The HUD uses this, but inverts down (?!)
406 _set_Velocities_Ground(M2FT*v[0], M2FT*v[1], -M2FT*v[2]);
408 // _set_Geocentric_Rates(M2FT*v[0], M2FT*v[1], M2FT*v[2]); // UNUSED
412 wind[0] = get_V_north_airmass() * FT2M * -1.0; // Wind in NED
413 wind[1] = get_V_east_airmass() * FT2M * -1.0;
414 wind[2] = get_V_down_airmass() * FT2M * -1.0;
415 Math::tmul33(xyz2ned, wind, wind); // Wind in global
416 Math::sub3(s->v, wind, v); // V - wind in global
417 Math::vmul33(s->orient, v, v); // to body coordinates
418 _set_Velocities_Wind_Body(v[0]*M2FT, -v[1]*M2FT, -v[2]*M2FT);
419 _set_V_rel_wind(Math::mag3(v)*M2FT); // units?
421 float P = fgGetDouble("/environment/pressure-inhg") * INHG2PA;
422 float T = fgGetDouble("/environment/temperature-degc") + 273.15;
423 float D = fgGetFloat("/environment/density-slugft3")
424 *SLUG2KG * M2FT*M2FT*M2FT;
425 _set_V_equiv_kts(Atmosphere::calcVEAS(v[0], P, T, D)*MPS2KTS);
426 _set_V_calibrated_kts(Atmosphere::calcVCAS(v[0], P, T)*MPS2KTS);
427 _set_Mach_number(Atmosphere::calcMach(v[0], T));
430 Math::vmul33(xyz2ned, s->acc, v);
431 _set_Accels_Local(M2FT*v[0], M2FT*v[1], M2FT*v[2]);
433 Math::vmul33(s->orient, s->acc, v);
434 _set_Accels_Body(M2FT*v[0], -M2FT*v[1], -M2FT*v[2]);
435 _set_Accels_CG_Body(M2FT*v[0], -M2FT*v[1], -M2FT*v[2]);
437 _fdm->getAirplane()->getPilotAccel(v);
438 _set_Accels_Pilot_Body(-M2FT*v[0], M2FT*v[1], M2FT*v[2]);
440 // There is no property for pilot G's, but I need it for a panel
441 // instrument. Hack this in here, and REMOVE IT WHEN IT FINDS A
443 fgSetFloat("/accelerations/pilot-g", -v[2]/9.8);
445 // The one appears (!) to want inverted pilot acceleration
446 // numbers, in G's...
447 Math::mul3(1.0/9.8, v, v);
448 _set_Accels_CG_Body_N(v[0], -v[1], -v[2]);
452 Glue::calcAlphaBeta(s, wind, &alpha, &beta);
457 Math::trans33(xyz2ned, tmp);
458 Math::mmul33(s->orient, tmp, tmp);
459 float roll, pitch, hdg;
460 Glue::orient2euler(tmp, &roll, &pitch, &hdg);
461 // make heading positive value
462 if(hdg < 0.0) hdg += PI2;
463 _set_Euler_Angles(roll, pitch, hdg);
466 Math::vmul33(s->orient, s->rot, v);
467 _set_Omega_Body(v[0], -v[1], -v[2]);
469 Glue::calcEulerRates(s, &roll, &pitch, &hdg);
470 _set_Euler_Rates(roll, pitch, hdg);
472 // Fill out our engine and gear objects
474 for(i=0; i<airplane->numGear(); i++) {
475 Gear* g = airplane->getGear(i);
476 SGPropertyNode * node = fgGetNode("gear/gear", i, true);
477 node->setBoolValue("has-brake", g->getBrake() != 0);
478 node->setBoolValue("wow", g->getCompressFraction() != 0);
479 node->setFloatValue("compression-norm", g->getCompressFraction());
480 node->setFloatValue("compression-m", g->getCompressDist());
481 node->setFloatValue("caster-angle-deg", g->getCasterAngle() * RAD2DEG);
482 node->setFloatValue("rollspeed-ms", g->getRollSpeed());
483 node->setBoolValue("ground-is-solid", g->getGroundIsSolid()!=0);
484 node->setFloatValue("ground-friction-factor", g->getGroundFrictionFactor());
487 Hook* h = airplane->getHook();
489 SGPropertyNode * node = fgGetNode("gear/tailhook", 0, true);
490 node->setFloatValue("position-norm", h->getCompressFraction());
493 Launchbar* l = airplane->getLaunchbar();
495 SGPropertyNode * node = fgGetNode("gear/launchbar", 0, true);
496 node->setFloatValue("position-norm", l->getCompressFraction());
497 node->setFloatValue("holdback-position-norm", l->getHoldbackCompressFraction());
498 node->setStringValue("state", l->getState());
499 node->setBoolValue("strop", l->getStrop());