Increase the nav-cache in-memory cache size.

[flightgear.git] / docs-mini / README.xmlsound

diff --git a/docs-mini/README.xmlsound b/docs-mini/README.xmlsound
index 695257d5d22ae776ddda9a4145cbf145808dc594..9fa920f89c9d453c4f70885acb28ca7e67813abd 100644 (file)
--- a/docs-mini/README.xmlsound
+++ b/docs-mini/README.xmlsound
@@ -128,6 +128,17 @@ Configuration description:
 
         in-transit:     the sample plays continuously,
                         while the property is changing its value.
 
         in-transit:     the sample plays continuously,
                         while the property is changing its value.

+
+  <type>
+        This defines the type os this sample:
+
+        fx:             this is the default type and doesn't need to be defined.
+
+        avionics:       sounds set to this type don't have a position and
+                        orientation but are treated as if it's mounted to
+                        the aircraft panel. it's up to the user to define
+                        if it can always be heard or only when in cockpit
+                        view.

    
    <volume> / <pitch>
         Volume or Pitch definition. Currently there may be up to 5
    
    <volume> / <pitch>
         Volume or Pitch definition. Currently there may be up to 5


@@ -201,9 +212,9 @@ Configuration description:
 
    <position>
         Specify the position of the sounds source relative to the
 
    <position>
         Specify the position of the sounds source relative to the

-        aircraft center.  The coordinate system used is a right hand
-        coordinate system where +Z = left, -Z = right, +X = down, -X =
-        up, +Y = forward, -Y = aft.  Distances are in meters.
+        aircraft center.  The coordinate system used is a left hand
+        coordinate system where +Y = left, -Y = right, -Z = down, +Z =
+        up, -X = forward, +X = aft.  Distances are in meters.

         The volume calculation due to distance and orientation of the
         sounds source ONLY work on mono samples!
 
         The volume calculation due to distance and orientation of the
         sounds source ONLY work on mono samples!
 


@@ -234,11 +245,11 @@ Configuration description:
         Z dimension
 
      <inner-angle>
         Z dimension
 
      <inner-angle>

-        The inner edge of the audio cone in degrees (0.0 - 360.0).
+        The inner edge of the audio cone in degrees (0.0 - 180.0).

         Any sound withing that angle will be played at the current gain.
 
      <outer-angle>
         Any sound withing that angle will be played at the current gain.
 
      <outer-angle>

-        The outer edge of the audio cone in degrees (0.0 - 360.0).
+        The outer edge of the audio cone in degrees (0.0 - 180.0).

         Any sound beyond the outer cone will be played at "outer-gain" volume.
 
      <outer-gain>
         Any sound beyond the outer cone will be played at "outer-gain" volume.
 
      <outer-gain>