-$a->strings["You must be logged in to use addons. "] = "Je moet ingelogd zijn om deze addons te kunnen gebruiken. ";
-$a->strings["Applications"] = "Toepassingen";
-$a->strings["No installed applications."] = "Geen toepassingen geïnstalleerd";
-$a->strings["Item not available."] = "Item niet beschikbaar";
-$a->strings["Item was not found."] = "Item niet gevonden";
-$a->strings["No contacts in common."] = "Geen gedeelde contacten.";
-$a->strings["Common Friends"] = "Gedeelde Vrienden";
-$a->strings["Credits"] = "Credits";
-$a->strings["Friendica is a community project, that would not be possible without the help of many people. Here is a list of those who have contributed to the code or the translation of Friendica. Thank you all!"] = "Friendica is een gemeenschapsproject dat niet mogelijk zou zijn zonder de hulp van vele mensen. Hier is een lijst van alle mensen die aan de code of vertalingen van Friendica hebben meegewerkt. Allen van harte bedankt!";
-$a->strings["Photos"] = "Foto's";
-$a->strings["Contact Photos"] = "Contactfoto's";
-$a->strings["Upload"] = "Uploaden";
-$a->strings["Files"] = "Bestanden";
-$a->strings["Not Found"] = "Niet gevonden";
-$a->strings["No profile"] = "Geen profiel";
-$a->strings["Welcome to %s"] = "Welkom op %s";
-$a->strings["Remote privacy information not available."] = "Privacyinformatie op afstand niet beschikbaar.";
-$a->strings["Visible to:"] = "Zichtbaar voor:";
-$a->strings["System down for maintenance"] = "Systeem onbeschikbaar wegens onderhoud";
-$a->strings["Welcome to Friendica"] = "Welkom bij Friendica";
-$a->strings["New Member Checklist"] = "Checklist voor nieuwe leden";
-$a->strings["We would like to offer some tips and links to help make your experience enjoyable. Click any item to visit the relevant page. A link to this page will be visible from your home page for two weeks after your initial registration and then will quietly disappear."] = "We willen je een paar tips en verwijzingen aanreiken om je een aangename ervaring te bezorgen. Klik op een item om de relevante pagina's te bezoeken. Een verwijzing naar deze pagina zal twee weken lang na je registratie zichtbaar zijn op je tijdlijn. Daarna zal de verwijzing stilletjes verdwijnen.";
-$a->strings["Getting Started"] = "Aan de slag";
-$a->strings["Friendica Walk-Through"] = "Doorloop Friendica";
-$a->strings["On your <em>Quick Start</em> page - find a brief introduction to your profile and network tabs, make some new connections, and find some groups to join."] = "Op je <em>Snelstart</em> pagina kun je een korte inleiding vinden over je profiel en netwerk tabs, om enkele nieuwe connecties te leggen en groepen te vinden om lid van te worden.";
-$a->strings["Settings"] = "Instellingen";
-$a->strings["Go to Your Settings"] = "Ga naar je instellingen";
-$a->strings["On your <em>Settings</em> page - change your initial password. Also make a note of your Identity Address. This looks just like an email address - and will be useful in making friends on the free social web."] = "Verander je initieel wachtwoord op je <em>instellingenpagina</em>. Noteer ook het adres van je identiteit. Dit ziet er uit als een e-mailadres - en zal nuttig zijn om vrienden te maken op het vrije sociale web.";
-$a->strings["Review the other settings, particularly the privacy settings. An unpublished directory listing is like having an unlisted phone number. In general, you should probably publish your listing - unless all of your friends and potential friends know exactly how to find you."] = "Controleer ook de andere instellingen, in het bijzonder de privacy-instellingen. Een niet-gepubliceerd adres is zoals een privé-telefoonnummer. In het algemeen wil je waarschijnlijk je adres publiceren - tenzij al je vrienden en mogelijke vrienden precies weten hoe je te vinden.";
-$a->strings["Profile"] = "Profiel";
-$a->strings["Upload Profile Photo"] = "Profielfoto uploaden";
-$a->strings["Upload a profile photo if you have not done so already. Studies have shown that people with real photos of themselves are ten times more likely to make friends than people who do not."] = "Upload een profielfoto, als je dat nog niet gedaan hebt. Studies tonen aan dat mensen met echte foto's van zichzelf tien keer gemakkelijker vrienden maken dan mensen die dat niet doen.";
-$a->strings["Edit Your Profile"] = "Bewerk je profiel";
-$a->strings["Edit your <strong>default</strong> profile to your liking. Review the settings for hiding your list of friends and hiding the profile from unknown visitors."] = "Bewerk je <strong>standaard</strong> profiel zoals je wilt. Controleer de instellingen om je vriendenlijst te verbergen, en om je profiel voor ongekende bezoekers te verbergen.";
-$a->strings["Profile Keywords"] = "Sleutelwoorden voor dit profiel";
-$a->strings["Set some public keywords for your default profile which describe your interests. We may be able to find other people with similar interests and suggest friendships."] = "Stel enkele openbare sleutelwoorden in voor je standaard profiel die je interesses beschrijven. We kunnen dan misschien mensen vinden met gelijkaardige interesses, en vrienden voorstellen.";
-$a->strings["Connecting"] = "Verbinding aan het maken";
-$a->strings["Importing Emails"] = "E-mails importeren";
-$a->strings["Enter your email access information on your Connector Settings page if you wish to import and interact with friends or mailing lists from your email INBOX"] = "Vul je e-mailtoegangsinformatie in op je pagina met verbindingsinstellingen als je vrienden of mailinglijsten uit je e-mail-inbox wilt importeren, en met hen wilt communiceren";
-$a->strings["Go to Your Contacts Page"] = "Ga naar je contactenpagina";
-$a->strings["Your Contacts page is your gateway to managing friendships and connecting with friends on other networks. Typically you enter their address or site URL in the <em>Add New Contact</em> dialog."] = "Je contactenpagina is jouw poort om vriendschappen te beheren en verbinding te leggen met vrienden op andere netwerken. Je kunt hun adres of URL toevoegen in de <em>Voeg nieuw contact toe</em> dialoog.";
-$a->strings["Go to Your Site's Directory"] = "Ga naar de gids van je website";
-$a->strings["The Directory page lets you find other people in this network or other federated sites. Look for a <em>Connect</em> or <em>Follow</em> link on their profile page. Provide your own Identity Address if requested."] = "In de gids vind je andere mensen in dit netwerk of op andere federatieve sites. Zoek naar het woord <em>Connect</em> of <em>Follow</em> op hun profielpagina (meestal aan de linkerkant). Vul je eigen identiteitsadres in wanneer daar om wordt gevraagd.";
-$a->strings["Finding New People"] = "Nieuwe mensen vinden";
-$a->strings["On the side panel of the Contacts page are several tools to find new friends. We can match people by interest, look up people by name or interest, and provide suggestions based on network relationships. On a brand new site, friend suggestions will usually begin to be populated within 24 hours."] = "Op het zijpaneel van de Contacten pagina vind je verschillende tools om nieuwe vrienden te zoeken. We kunnen mensen op interesses matchen, mensen opzoeken op naam of hobby, en suggesties doen gebaseerd op netwerk-relaties. Op een nieuwe webstek beginnen vriendschapssuggesties meestal binnen de 24 uur beschikbaar te worden.";
-$a->strings["Groups"] = "Groepen";
-$a->strings["Group Your Contacts"] = "Groepeer je contacten";
-$a->strings["Once you have made some friends, organize them into private conversation groups from the sidebar of your Contacts page and then you can interact with each group privately on your Network page."] = "Als je een aantal vrienden gemaakt hebt kun je ze in je eigen gespreksgroepen indelen vanuit de zijbalk van je 'Contacten' pagina, en dan kun je met elke groep apart contact houden op je Netwerk pagina. ";
-$a->strings["Why Aren't My Posts Public?"] = "Waarom zijn mijn berichten niet openbaar?";
-$a->strings["Friendica respects your privacy. By default, your posts will only show up to people you've added as friends. For more information, see the help section from the link above."] = "Friendica respecteert je privacy. Standaard zullen je berichten alleen zichtbaar zijn voor personen die jij als vriend hebt toegevoegd. Lees de help (zie de verwijzing hierboven) voor meer informatie.";
-$a->strings["Getting Help"] = "Hulp krijgen";
-$a->strings["Go to the Help Section"] = "Ga naar de help";
-$a->strings["Our <strong>help</strong> pages may be consulted for detail on other program features and resources."] = "Je kunt onze <strong>help</strong> pagina's raadplegen voor gedetailleerde informatie over andere functies van dit programma.";
-$a->strings["Visit %s's profile [%s]"] = "Bekijk het profiel van %s [%s]";
-$a->strings["Edit contact"] = "Contact bewerken";
-$a->strings["Contacts who are not members of a group"] = "Contacten die geen leden zijn van een groep";
-$a->strings["Not Extended"] = "";
-$a->strings["Resubscribing to OStatus contacts"] = "";
-$a->strings["Error"] = "Fout";
-$a->strings["Done"] = "Klaar";
-$a->strings["Keep this window open until done."] = "Houd dit scherm open tot het klaar is";
-$a->strings["Do you really want to delete this suggestion?"] = "Wil je echt dit voorstel verwijderen?";
-$a->strings["No suggestions available. If this is a new site, please try again in 24 hours."] = "Geen voorstellen beschikbaar. Als dit een nieuwe website is, kun je het over 24 uur nog eens proberen.";
-$a->strings["Ignore/Hide"] = "Negeren/Verbergen";
-$a->strings["Friend Suggestions"] = "Vriendschapsvoorstellen";
-$a->strings["[Embedded content - reload page to view]"] = "[Ingebedde inhoud - herlaad pagina om het te bekijken]";
-$a->strings["This site has exceeded the number of allowed daily account registrations. Please try again tomorrow."] = "Deze website heeft het toegelaten dagelijkse aantal registraties overschreden. Probeer morgen opnieuw.";
-$a->strings["Import"] = "Importeren";
-$a->strings["Move account"] = "Account verplaatsen";
-$a->strings["You can import an account from another Friendica server."] = "Je kunt een account van een andere Friendica server importeren.";
-$a->strings["You need to export your account from the old server and upload it here. We will recreate your old account here with all your contacts. We will try also to inform your friends that you moved here."] = "Je moet je account bij de oude server exporteren, en hier uploaden. We zullen je oude account hier opnieuw aanmaken, met al je contacten. We zullen ook proberen om je vrienden in te lichten dat je naar hier verhuisd bent.";
-$a->strings["This feature is experimental. We can't import contacts from the OStatus network (GNU Social/Statusnet) or from Diaspora"] = "";
-$a->strings["Account file"] = "Account bestand";
-$a->strings["To export your account, go to \"Settings->Export your personal data\" and select \"Export account\""] = "Om je account te exporteren, ga naar \"Instellingen->Exporteer je persoonlijke data\" en selecteer \"Exporteer account\"";
-$a->strings["No keywords to match. Please add keywords to your default profile."] = "Geen sleutelwoorden om te zoeken. Voeg sleutelwoorden toe aan je standaard profiel.";
-$a->strings["is interested in:"] = "Is geïnteresseerd in:";
-$a->strings["Profile Match"] = "Profielmatch";
-$a->strings["No matches"] = "Geen resultaten";
-$a->strings["Manage Identities and/or Pages"] = "Beheer Identiteiten en/of Pagina's";
-$a->strings["Toggle between different identities or community/group pages which share your account details or which you have been granted \"manage\" permissions"] = "Wissel tussen verschillende identiteiten of forum/groeppagina's die jouw accountdetails delen of waar je \"beheerdersrechten\" hebt gekregen.";
-$a->strings["Select an identity to manage: "] = "Selecteer een identiteit om te beheren:";
-$a->strings["Submit"] = "Opslaan";
-$a->strings["Invalid request."] = "";
-$a->strings["Sorry, maybe your upload is bigger than the PHP configuration allows"] = "";
-$a->strings["Or - did you try to upload an empty file?"] = "";
-$a->strings["File exceeds size limit of %s"] = "";
-$a->strings["File upload failed."] = "Uploaden van bestand mislukt.";
-$a->strings["- select -"] = "- Kies -";
-$a->strings["l F d, Y \\@ g:i A"] = "l F d, Y \\@ g:i A";
-$a->strings["Time Conversion"] = "Tijdsconversie";
-$a->strings["Friendica provides this service for sharing events with other networks and friends in unknown timezones."] = "Friendica biedt deze dienst aan om gebeurtenissen te delen met andere netwerken en vrienden in onbekende tijdzones.";
-$a->strings["UTC time: %s"] = "UTC tijd: %s";
-$a->strings["Current timezone: %s"] = "Huidige Tijdzone: %s";
-$a->strings["Converted localtime: %s"] = "Omgerekende lokale tijd: %s";
-$a->strings["Please select your timezone:"] = "Selecteer je tijdzone:";
-$a->strings["No more system notifications."] = "Geen systeemnotificaties meer.";
-$a->strings["System Notifications"] = "Systeemnotificaties";
-$a->strings["{0} wants to be your friend"] = "{0} wilt je vriend worden";
-$a->strings["{0} sent you a message"] = "{0} stuurde jou een bericht";
-$a->strings["{0} requested registration"] = "{0} vroeg om zich te registreren";
-$a->strings["Poke/Prod"] = "Aanstoten/porren";
-$a->strings["poke, prod or do other things to somebody"] = "aanstoten, porren of andere dingen met iemand doen";
-$a->strings["Recipient"] = "Ontvanger";
-$a->strings["Choose what you wish to do to recipient"] = "Kies wat je met de ontvanger wil doen";
-$a->strings["Make this post private"] = "Dit bericht privé maken";
-$a->strings["Public access denied."] = "Niet vrij toegankelijk";
-$a->strings["Only logged in users are permitted to perform a probing."] = "";
-$a->strings["Permission denied"] = "Toegang geweigerd";
-$a->strings["Invalid profile identifier."] = "Ongeldige profiel-identificatie.";
-$a->strings["Profile Visibility Editor"] = "";
-$a->strings["Click on a contact to add or remove."] = "Klik op een contact om het toe te voegen of te verwijderen.";
-$a->strings["Visible To"] = "Zichtbaar voor";
-$a->strings["All Contacts (with secure profile access)"] = "Alle contacten (met veilige profieltoegang)";
-$a->strings["Account approved."] = "Account goedgekeurd.";
-$a->strings["Registration revoked for %s"] = "Registratie ingetrokken voor %s";
-$a->strings["Please login."] = "Inloggen.";
-$a->strings["%1\$s is following %2\$s's %3\$s"] = "%1\$s volgt %3\$s van %2\$s";
-$a->strings["Tag removed"] = "Label verwijderd";
-$a->strings["Remove Item Tag"] = "Verwijder label van item";
-$a->strings["Select a tag to remove: "] = "Selecteer een label om te verwijderen: ";
-$a->strings["Remove"] = "Verwijderen";
-$a->strings["Export account"] = "Account exporteren";
-$a->strings["Export your account info and contacts. Use this to make a backup of your account and/or to move it to another server."] = "Je account informatie en contacten exporteren. Gebruik dit om een backup van je account te maken en/of om het te verhuizen naar een andere server.";
-$a->strings["Export all"] = "Alles exporteren";
-$a->strings["Export your accout info, contacts and all your items as json. Could be a very big file, and could take a lot of time. Use this to make a full backup of your account (photos are not exported)"] = "Je account info, contacten en al je items in json formaat exporteren. Dit kan een heel groot bestand worden, en kan lang duren. Gebruik dit om een volledige backup van je account te maken (foto's worden niet geexporteerd)";
-$a->strings["Export personal data"] = "Persoonlijke gegevens exporteren";
-$a->strings["No contacts."] = "Geen contacten.";
-$a->strings["Access denied."] = "Toegang geweigerd";
-$a->strings["Image exceeds size limit of %s"] = "";
-$a->strings["Unable to process image."] = "Niet in staat om de afbeelding te verwerken";
-$a->strings["Wall Photos"] = "";
-$a->strings["Image upload failed."] = "Uploaden van afbeelding mislukt.";
-$a->strings["Number of daily wall messages for %s exceeded. Message failed."] = "";
-$a->strings["No recipient selected."] = "Geen ontvanger geselecteerd.";
-$a->strings["Unable to check your home location."] = "Niet in staat om je tijdlijn-locatie vast te stellen";
-$a->strings["Message could not be sent."] = "Bericht kon niet verzonden worden.";
-$a->strings["Message collection failure."] = "Fout bij het verzamelen van berichten.";
-$a->strings["Message sent."] = "Bericht verzonden.";
-$a->strings["No recipient."] = "Geen ontvanger.";
-$a->strings["Send Private Message"] = "Verstuur privébericht";
-$a->strings["If you wish for %s to respond, please check that the privacy settings on your site allow private mail from unknown senders."] = "Als je wilt dat %s antwoordt moet je nakijken dat de privacy-instellingen op jouw website privéberichten van onbekende afzenders toelaat.";
-$a->strings["To:"] = "Aan:";
-$a->strings["Subject:"] = "Onderwerp:";
-$a->strings["Your message:"] = "Jouw bericht:";
-$a->strings["Login"] = "Login";
-$a->strings["The post was created"] = "";
-$a->strings["Item not found"] = "Item niet gevonden";
-$a->strings["Edit post"] = "Bericht bewerken";
-$a->strings["CC: email addresses"] = "CC: e-mailadressen";
-$a->strings["Example: bob@example.com, mary@example.com"] = "Voorbeeld: bob@voorbeeld.nl, an@voorbeeld.be";
-$a->strings["Contact not found."] = "Contact niet gevonden";
-$a->strings["Friend suggestion sent."] = "Vriendschapsvoorstel verzonden.";
-$a->strings["Suggest Friends"] = "Stel vrienden voor";
-$a->strings["Suggest a friend for %s"] = "Stel een vriend voor aan %s";
-$a->strings["Access to this profile has been restricted."] = "Toegang tot dit profiel is beperkt.";
-$a->strings["Events"] = "Gebeurtenissen";
-$a->strings["View"] = "";
-$a->strings["Previous"] = "Vorige";
-$a->strings["Next"] = "Volgende";
-$a->strings["today"] = "vandaag";
-$a->strings["month"] = "maand";
-$a->strings["week"] = "week";
-$a->strings["day"] = "dag";
-$a->strings["list"] = "";
-$a->strings["User not found"] = "";
-$a->strings["This calendar format is not supported"] = "";
-$a->strings["No exportable data found"] = "Geen exporteerbare data gevonden";
-$a->strings["calendar"] = "";
-$a->strings["Network:"] = "Netwerk:";
-$a->strings["%d contact edited."] = [
- 0 => "",
- 1 => "",
-];
-$a->strings["Could not access contact record."] = "Kon geen toegang krijgen tot de contactgegevens";
-$a->strings["Could not locate selected profile."] = "Kon het geselecteerde profiel niet vinden.";
-$a->strings["Contact updated."] = "Contact bijgewerkt.";
-$a->strings["Failed to update contact record."] = "Ik kon de contactgegevens niet aanpassen.";
-$a->strings["Contact has been blocked"] = "Contact is geblokkeerd";
-$a->strings["Contact has been unblocked"] = "Contact is gedeblokkeerd";
-$a->strings["Contact has been ignored"] = "Contact wordt genegeerd";
-$a->strings["Contact has been unignored"] = "Contact wordt niet meer genegeerd";
-$a->strings["Contact has been archived"] = "Contact is gearchiveerd";
-$a->strings["Contact has been unarchived"] = "Contact is niet meer gearchiveerd";
-$a->strings["Drop contact"] = "";
-$a->strings["Do you really want to delete this contact?"] = "Wil je echt dit contact verwijderen?";
-$a->strings["Contact has been removed."] = "Contact is verwijderd.";
-$a->strings["You are mutual friends with %s"] = "Je bent wederzijds bevriend met %s";
-$a->strings["You are sharing with %s"] = "Je deelt met %s";
-$a->strings["%s is sharing with you"] = "%s deelt met jou";
-$a->strings["Private communications are not available for this contact."] = "Privécommunicatie met dit contact is niet beschikbaar.";
-$a->strings["Never"] = "Nooit";
-$a->strings["(Update was successful)"] = "(Wijziging is geslaagd)";
-$a->strings["(Update was not successful)"] = "(Wijziging is niet geslaagd)";
-$a->strings["Suggest friends"] = "Stel vrienden voor";
-$a->strings["Network type: %s"] = "Netwerk type: %s";
-$a->strings["Communications lost with this contact!"] = "Communicatie met dit contact is verbroken!";
-$a->strings["Fetch further information for feeds"] = "";
-$a->strings["Fetch information like preview pictures, title and teaser from the feed item. You can activate this if the feed doesn't contain much text. Keywords are taken from the meta header in the feed item and are posted as hash tags."] = "";
-$a->strings["Disabled"] = "Uitgeschakeld";
-$a->strings["Fetch information"] = "";
-$a->strings["Fetch keywords"] = "";
-$a->strings["Fetch information and keywords"] = "";
-$a->strings["Disconnect/Unfollow"] = "";
-$a->strings["Contact"] = "";
-$a->strings["Profile Visibility"] = "Zichtbaarheid profiel";
-$a->strings["Please choose the profile you would like to display to %s when viewing your profile securely."] = "Kies het profiel dat getoond moet worden wanneer %s je profiel bezoekt. ";
-$a->strings["Contact Information / Notes"] = "Contactinformatie / aantekeningen";
-$a->strings["Their personal note"] = "";
-$a->strings["Edit contact notes"] = "Wijzig aantekeningen over dit contact";
-$a->strings["Block/Unblock contact"] = "Blokkeer/deblokkeer contact";
-$a->strings["Ignore contact"] = "Negeer contact";
-$a->strings["Repair URL settings"] = "Repareer URL-instellingen";
-$a->strings["View conversations"] = "Toon gesprekken";
-$a->strings["Last update:"] = "Laatste wijziging:";
-$a->strings["Update public posts"] = "Openbare posts aanpassen";
-$a->strings["Update now"] = "Wijzig nu";
-$a->strings["Unblock"] = "Blokkering opheffen";
-$a->strings["Block"] = "Blokkeren";
-$a->strings["Unignore"] = "Negeer niet meer";
-$a->strings["Ignore"] = "Negeren";
-$a->strings["Currently blocked"] = "Op dit moment geblokkeerd";
-$a->strings["Currently ignored"] = "Op dit moment genegeerd";
-$a->strings["Currently archived"] = "Op dit moment gearchiveerd";
-$a->strings["Awaiting connection acknowledge"] = "";
-$a->strings["Hide this contact from others"] = "Verberg dit contact voor anderen";
-$a->strings["Replies/likes to your public posts <strong>may</strong> still be visible"] = "Antwoorden of 'vind ik leuk's op je openbare posts <strong>kunnen</strong> nog zichtbaar zijn";
-$a->strings["Notification for new posts"] = "Meldingen voor nieuwe berichten";
-$a->strings["Send a notification of every new post of this contact"] = "";
-$a->strings["Blacklisted keywords"] = "";
-$a->strings["Comma separated list of keywords that should not be converted to hashtags, when \"Fetch information and keywords\" is selected"] = "";
-$a->strings["Profile URL"] = "Profiel url";
-$a->strings["Location:"] = "Plaats:";
-$a->strings["XMPP:"] = "";
-$a->strings["About:"] = "Over:";
-$a->strings["Tags:"] = "Labels:";
-$a->strings["Actions"] = "";
-$a->strings["Status"] = "Tijdlijn";
-$a->strings["Contact Settings"] = "";
-$a->strings["Suggestions"] = "Voorstellen";
-$a->strings["Suggest potential friends"] = "Stel vrienden voor";
-$a->strings["All Contacts"] = "Alle Contacten";
-$a->strings["Show all contacts"] = "Toon alle contacten";
-$a->strings["Unblocked"] = "Niet geblokkeerd";
-$a->strings["Only show unblocked contacts"] = "Toon alleen niet-geblokkeerde contacten";
-$a->strings["Blocked"] = "Geblokkeerd";
-$a->strings["Only show blocked contacts"] = "Toon alleen geblokkeerde contacten";
-$a->strings["Ignored"] = "Genegeerd";
-$a->strings["Only show ignored contacts"] = "Toon alleen genegeerde contacten";
-$a->strings["Archived"] = "Gearchiveerd";
-$a->strings["Only show archived contacts"] = "Toon alleen gearchiveerde contacten";
-$a->strings["Hidden"] = "Verborgen";
-$a->strings["Only show hidden contacts"] = "Toon alleen verborgen contacten";
-$a->strings["Search your contacts"] = "Doorzoek je contacten";
-$a->strings["Results for: %s"] = "";
-$a->strings["Find"] = "Zoek";
-$a->strings["Update"] = "Wijzigen";
-$a->strings["Archive"] = "Archiveer";
-$a->strings["Unarchive"] = "Archiveer niet meer";
-$a->strings["Batch Actions"] = "";
-$a->strings["Status Messages and Posts"] = "Berichten op jouw tijdlijn";
-$a->strings["Profile Details"] = "Profieldetails";
-$a->strings["View all contacts"] = "Alle contacten zien";
-$a->strings["View all common friends"] = "";
-$a->strings["Advanced"] = "Geavanceerd";
-$a->strings["Advanced Contact Settings"] = "Geavanceerde instellingen voor contacten";
-$a->strings["Mutual Friendship"] = "Wederzijdse vriendschap";
-$a->strings["is a fan of yours"] = "Is een fan van jou";
-$a->strings["you are a fan of"] = "Jij bent een fan van";
-$a->strings["This is you"] = "Dit ben jij";
-$a->strings["Toggle Blocked status"] = "Schakel geblokkeerde status";
-$a->strings["Toggle Ignored status"] = "Schakel negeerstatus";
-$a->strings["Toggle Archive status"] = "Schakel archiveringsstatus";
-$a->strings["Delete contact"] = "Verwijder contact";
-$a->strings["Parent user not found."] = "";
-$a->strings["No parent user"] = "";
-$a->strings["Parent Password:"] = "";
-$a->strings["Please enter the password of the parent account to legitimize your request."] = "";
-$a->strings["Parent User"] = "";
-$a->strings["Parent users have total control about this account, including the account settings. Please double check whom you give this access."] = "";
-$a->strings["Save Settings"] = "Instellingen opslaan";
-$a->strings["Delegate Page Management"] = "Paginabeheer uitbesteden";
-$a->strings["Delegates"] = "";
-$a->strings["Delegates are able to manage all aspects of this account/page except for basic account settings. Please do not delegate your personal account to anybody that you do not trust completely."] = "Personen waaraan het beheer is uitbesteed kunnen alle onderdelen van een account/pagina beheren, behalve de basisinstellingen van een account. Besteed je persoonlijke account daarom niet uit aan personen die je niet volledig vertrouwt.";
-$a->strings["Existing Page Delegates"] = "Bestaande personen waaraan het paginabeheer is uitbesteed";
-$a->strings["Potential Delegates"] = "Mogelijke personen waaraan het paginabeheer kan worden uitbesteed ";
-$a->strings["Add"] = "Toevoegen";
-$a->strings["No entries."] = "Geen gegevens.";
-$a->strings["You must be logged in to use this module"] = "";
-$a->strings["Source URL"] = "";
-$a->strings["Post successful."] = "Bericht succesvol geplaatst.";
-$a->strings["Subscribing to OStatus contacts"] = "";
-$a->strings["No contact provided."] = "";
-$a->strings["Couldn't fetch information for contact."] = "";
-$a->strings["Couldn't fetch friends for contact."] = "";
-$a->strings["success"] = "Succesvol";
-$a->strings["failed"] = "Mislukt";
-$a->strings["ignored"] = "Verboden";
-$a->strings["Image uploaded but image cropping failed."] = "Afbeelding opgeladen, maar bijsnijden mislukt.";
-$a->strings["Image size reduction [%s] failed."] = "Verkleining van de afbeelding [%s] mislukt.";
-$a->strings["Shift-reload the page or clear browser cache if the new photo does not display immediately."] = "Shift-herlaad de pagina, of maak de browser cache leeg als nieuwe foto's niet onmiddellijk verschijnen.";
-$a->strings["Unable to process image"] = "Ik kan de afbeelding niet verwerken";
-$a->strings["Upload File:"] = "Upload bestand:";
-$a->strings["Select a profile:"] = "Kies een profiel:";
-$a->strings["or"] = "of";
-$a->strings["skip this step"] = "Deze stap overslaan";
-$a->strings["select a photo from your photo albums"] = "Kies een foto uit je fotoalbums";
-$a->strings["Crop Image"] = "Afbeelding bijsnijden";
-$a->strings["Please adjust the image cropping for optimum viewing."] = "Pas het afsnijden van de afbeelding aan voor het beste resultaat.";
-$a->strings["Done Editing"] = "Wijzigingen compleet";
-$a->strings["Image uploaded successfully."] = "Uploaden van afbeelding gelukt.";
-$a->strings["Contact wasn't found or can't be unfollowed."] = "";
-$a->strings["Contact unfollowed"] = "";
-$a->strings["Submit Request"] = "Aanvraag indienen";
-$a->strings["You aren't a friend of this contact."] = "";
-$a->strings["Unfollowing is currently not supported by your network."] = "";
-$a->strings["Your Identity Address:"] = "Adres van je identiteit:";
-$a->strings["Gender:"] = "Geslacht:";
-$a->strings["Status:"] = "Tijdlijn:";
-$a->strings["Homepage:"] = "Website:";
-$a->strings["Global Directory"] = "Globale gids";
-$a->strings["Find on this site"] = "Op deze website zoeken";
-$a->strings["Results for:"] = "";
-$a->strings["Site Directory"] = "Websitegids";
-$a->strings["No entries (some entries may be hidden)."] = "Geen gegevens (sommige gegevens kunnen verborgen zijn).";
-$a->strings["People Search - %s"] = "";
-$a->strings["Forum Search - %s"] = "";
-$a->strings["The contact could not be added."] = "";
-$a->strings["You already added this contact."] = "Je hebt deze kontakt al toegevoegd";
-$a->strings["Diaspora support isn't enabled. Contact can't be added."] = "";
-$a->strings["OStatus support is disabled. Contact can't be added."] = "";
-$a->strings["The network type couldn't be detected. Contact can't be added."] = "";
-$a->strings["Please answer the following:"] = "Beantwoord het volgende:";
-$a->strings["Does %s know you?"] = "Kent %s jou?";
-$a->strings["Add a personal note:"] = "Voeg een persoonlijke opmerking toe:";
-$a->strings["No valid account found."] = "Geen geldige account gevonden.";
-$a->strings["Password reset request issued. Check your email."] = "Verzoek om wachtwoord opnieuw in te stellen werd verstuurd. Kijk uw e-mail na.";
-$a->strings["\n\t\tDear %1\$s,\n\t\t\tA request was recently received at \"%2\$s\" to reset your account\n\t\tpassword. In order to confirm this request, please select the verification link\n\t\tbelow or paste it into your web browser address bar.\n\n\t\tIf you did NOT request this change, please DO NOT follow the link\n\t\tprovided and ignore and/or delete this email, the request will expire shortly.\n\n\t\tYour password will not be changed unless we can verify that you\n\t\tissued this request."] = "\n\t\tBeste %1\$s,\n\t\t\tEr is recent om \"%2\$s\" een verzoek gekomen om je paswoord te resetten.\n\t\tOm dit verzoek te bevestigen, gelieve de verificatie link hieronder te volgen of in je browser te kopiëren.\n\n\t\tAls je dit verzoek NIET hebt gedaan, volg deze link dan NIET en negeer \n\t\ten/of verwijder deze email, het verzoek zal binnenkort vanzelf ongeldig worden.\n\n\t\tJe paswoord zal niet aangepast worden tenzij we kunnen verifiëren\n\t\tdat je dit verzoek verzonden hebt.";
-$a->strings["\n\t\tFollow this link soon to verify your identity:\n\n\t\t%1\$s\n\n\t\tYou will then receive a follow-up message containing the new password.\n\t\tYou may change that password from your account settings page after logging in.\n\n\t\tThe login details are as follows:\n\n\t\tSite Location:\t%2\$s\n\t\tLogin Name:\t%3\$s"] = "\n\t\tVolg nu deze link om je identiteit te bevestigen:\n\n\t\t%1\$s\n\n\t\tJe zal dan een boodschap krijgen met je nieuw paswoord.\n\t\tJe kunt je paswoord veranderen in je instelling pagina nadat je ingelogd bent.\n\n\t\tDe login details zijn de volgende:\n\n\t\tSite locatie:\t%2\$s\n\t\tLogin naam:\t%3\$s";
-$a->strings["Password reset requested at %s"] = "Op %s werd gevraagd je wachtwoord opnieuw in te stellen";
-$a->strings["Request could not be verified. (You may have previously submitted it.) Password reset failed."] = "Verzoek kon niet geverifieerd worden. (Misschien heb je het voordien al ingediend.) Wachtwoord niet opnieuw ingesteld.";
-$a->strings["Request has expired, please make a new one."] = "";
-$a->strings["Forgot your Password?"] = "Wachtwoord vergeten?";
-$a->strings["Enter your email address and submit to have your password reset. Then check your email for further instructions."] = "Voer je e-mailadres in en verstuur het om je wachtwoord opnieuw in te stellen. Kijk dan je e-mail na voor verdere instructies.";
-$a->strings["Nickname or Email: "] = "Bijnaam of e-mail:";
-$a->strings["Reset"] = "Opnieuw";
-$a->strings["Password Reset"] = "Wachtwoord opnieuw instellen";
-$a->strings["Your password has been reset as requested."] = "Je wachtwoord is opnieuw ingesteld zoals gevraagd.";
-$a->strings["Your new password is"] = "Je nieuwe wachtwoord is";
-$a->strings["Save or copy your new password - and then"] = "Bewaar of kopieer je nieuw wachtwoord - en dan";
-$a->strings["click here to login"] = "klik hier om in te loggen";
-$a->strings["Your password may be changed from the <em>Settings</em> page after successful login."] = "Je kunt dit wachtwoord veranderen nadat je bent ingelogd op de <em>Instellingen></em> pagina.";
-$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tYour password has been changed as requested. Please retain this\n\t\t\tinformation for your records (or change your password immediately to\n\t\t\tsomething that you will remember).\n\t\t"] = "";
-$a->strings["\n\t\t\tYour login details are as follows:\n\n\t\t\tSite Location:\t%1\$s\n\t\t\tLogin Name:\t%2\$s\n\t\t\tPassword:\t%3\$s\n\n\t\t\tYou may change that password from your account settings page after logging in.\n\t\t"] = "";
-$a->strings["Your password has been changed at %s"] = "Je wachtwoord is veranderd op %s";
-$a->strings["Source input"] = "";
-$a->strings["BBCode::toPlaintext"] = "";
-$a->strings["BBCode::convert (raw HTML)"] = "";
-$a->strings["BBCode::convert"] = "";
-$a->strings["BBCode::convert => HTML::toBBCode"] = "";
-$a->strings["BBCode::toMarkdown"] = "";
-$a->strings["BBCode::toMarkdown => Markdown::convert"] = "";
-$a->strings["BBCode::toMarkdown => Markdown::toBBCode"] = "";
-$a->strings["BBCode::toMarkdown => Markdown::convert => HTML::toBBCode"] = "";
-$a->strings["Source input \\x28Diaspora format\\x29"] = "";
-$a->strings["Markdown::toBBCode"] = "";
-$a->strings["Raw HTML input"] = "";
-$a->strings["HTML Input"] = "";
-$a->strings["HTML::toBBCode"] = "";
-$a->strings["HTML::toPlaintext"] = "";
-$a->strings["Source text"] = "";
-$a->strings["BBCode"] = "";
-$a->strings["Markdown"] = "";
-$a->strings["HTML"] = "";
-$a->strings["This is Friendica, version"] = "Dit is Friendica, versie";
-$a->strings["running at web location"] = "draaiend op web-adres";
-$a->strings["Please visit <a href=\"https://friendi.ca\">Friendi.ca</a> to learn more about the Friendica project."] = "";
-$a->strings["Bug reports and issues: please visit"] = "Bug rapporten en problemen: bezoek";
-$a->strings["the bugtracker at github"] = "";
-$a->strings["Suggestions, praise, etc. - please email \"info\" at \"friendi - dot - ca"] = "";
-$a->strings["Installed addons/apps:"] = "";
-$a->strings["No installed addons/apps"] = "";
-$a->strings["Read about the <a href=\"%1\$s/tos\">Terms of Service</a> of this node."] = "";
-$a->strings["On this server the following remote servers are blocked."] = "";
-$a->strings["Blocked domain"] = "";
-$a->strings["Reason for the block"] = "";
-$a->strings["Total invitation limit exceeded."] = "Totale uitnodigingslimiet overschreden.";
-$a->strings["%s : Not a valid email address."] = "%s: Geen geldig e-mailadres.";
-$a->strings["Please join us on Friendica"] = "Kom bij ons op Friendica";
-$a->strings["Invitation limit exceeded. Please contact your site administrator."] = "Uitnodigingslimiet overschreden. Neem contact op met de beheerder van je website.";
-$a->strings["%s : Message delivery failed."] = "%s : Aflevering van bericht mislukt.";
-$a->strings["%d message sent."] = [
- 0 => "%d bericht verzonden.",
- 1 => "%d berichten verzonden.",
-];
-$a->strings["You have no more invitations available"] = "Je kunt geen uitnodigingen meer sturen";
-$a->strings["Visit %s for a list of public sites that you can join. Friendica members on other sites can all connect with each other, as well as with members of many other social networks."] = "Bezoek %s voor een lijst van openbare sites waar je je kunt aansluiten. Friendica leden op andere sites kunnen allemaal met elkaar verbonden worden, en ook met leden van verschillende andere sociale netwerken.";
-$a->strings["To accept this invitation, please visit and register at %s or any other public Friendica website."] = "Om deze uitnodiging te accepteren kan je je op %s registreren of op een andere vrij toegankelijke Friendica-website.";
-$a->strings["Friendica sites all inter-connect to create a huge privacy-enhanced social web that is owned and controlled by its members. They can also connect with many traditional social networks. See %s for a list of alternate Friendica sites you can join."] = "Friendica servers zijn allemaal onderling verbonden om een reusachtig sociaal web te maken met verbeterde privacy, dat eigendom is van en gecontroleerd door zijn leden. Ze kunnen ook verbindingen maken met verschillende traditionele sociale netwerken. Bekijk %s voor een lijst van alternatieve Friendica servers waar je aan kunt sluiten.";
-$a->strings["Our apologies. This system is not currently configured to connect with other public sites or invite members."] = "Onze verontschuldigingen. Dit systeem is momenteel niet ingesteld om verbinding te maken met andere openbare plaatsen of leden uit te nodigen.";
-$a->strings["Friendica sites all inter-connect to create a huge privacy-enhanced social web that is owned and controlled by its members. They can also connect with many traditional social networks."] = "";
-$a->strings["To accept this invitation, please visit and register at %s."] = "";
-$a->strings["Send invitations"] = "Verstuur uitnodigingen";
-$a->strings["Enter email addresses, one per line:"] = "Vul e-mailadressen in, één per lijn:";
-$a->strings["You are cordially invited to join me and other close friends on Friendica - and help us to create a better social web."] = "Ik nodig je vriendelijk uit om bij mij en andere vrienden te komen op Friendica - en ons te helpen om een beter sociaal web te bouwen.";
-$a->strings["You will need to supply this invitation code: \$invite_code"] = "Je zult deze uitnodigingscode moeten invullen: \$invite_code";
-$a->strings["Once you have registered, please connect with me via my profile page at:"] = "Eens je geregistreerd bent kun je contact leggen met mij via mijn profielpagina op:";
-$a->strings["For more information about the Friendica project and why we feel it is important, please visit http://friendi.ca"] = "";
-$a->strings["Contact settings applied."] = "Contactinstellingen toegepast.";
-$a->strings["Contact update failed."] = "Aanpassen van contact mislukt.";
-$a->strings["<strong>WARNING: This is highly advanced</strong> and if you enter incorrect information your communications with this contact may stop working."] = "<strong>WAARSCHUWING: Dit is zeer geavanceerd</strong> en als je verkeerde informatie invult, zal je mogelijk niet meer kunnen communiceren met deze contactpersoon.";
-$a->strings["Please use your browser 'Back' button <strong>now</strong> if you are uncertain what to do on this page."] = "Gebruik <strong>nu</strong> de \"terug\"-knop in je webbrowser wanneer je niet weet wat je op deze pagina moet doen.";
-$a->strings["No mirroring"] = "";
-$a->strings["Mirror as forwarded posting"] = "";
-$a->strings["Mirror as my own posting"] = "";
-$a->strings["Return to contact editor"] = "Ga terug naar contactbewerker";
-$a->strings["Refetch contact data"] = "";
-$a->strings["Remote Self"] = "";
-$a->strings["Mirror postings from this contact"] = "";
-$a->strings["Mark this contact as remote_self, this will cause friendica to repost new entries from this contact."] = "";
-$a->strings["Name"] = "Naam";
-$a->strings["Account Nickname"] = "Bijnaam account";
-$a->strings["@Tagname - overrides Name/Nickname"] = "@Labelnaam - krijgt voorrang op naam/bijnaam";
-$a->strings["Account URL"] = "URL account";
-$a->strings["Friend Request URL"] = "URL vriendschapsverzoek";
-$a->strings["Friend Confirm URL"] = "URL vriendschapsbevestiging";
-$a->strings["Notification Endpoint URL"] = "";
-$a->strings["Poll/Feed URL"] = "URL poll/feed";
-$a->strings["New photo from this URL"] = "Nieuwe foto van deze URL";
-$a->strings["%1\$s welcomes %2\$s"] = "%1\$s heet %2\$s van harte welkom";
-$a->strings["Help:"] = "Help:";
-$a->strings["Help"] = "Help";
-$a->strings["Page not found."] = "Pagina niet gevonden";
-$a->strings["Friendica Communications Server - Setup"] = "";
-$a->strings["Could not connect to database."] = "Kon geen toegang krijgen tot de database.";
-$a->strings["Could not create table."] = "Kon tabel niet aanmaken.";
-$a->strings["Your Friendica site database has been installed."] = "De database van je Friendica-website is geïnstalleerd.";
-$a->strings["You may need to import the file \"database.sql\" manually using phpmyadmin or mysql."] = "Het kan nodig zijn om het bestand \"database.sql\" manueel te importeren met phpmyadmin of mysql.";
-$a->strings["Please see the file \"INSTALL.txt\"."] = "Zie het bestand \"INSTALL.txt\".";
-$a->strings["Database already in use."] = "";
-$a->strings["System check"] = "Systeemcontrole";
-$a->strings["Check again"] = "Controleer opnieuw";
-$a->strings["Database connection"] = "Verbinding met database";
-$a->strings["In order to install Friendica we need to know how to connect to your database."] = "Om Friendica te kunnen installeren moet ik weten hoe ik jouw database kan bereiken.";
-$a->strings["Please contact your hosting provider or site administrator if you have questions about these settings."] = "Neem contact op met jouw hostingprovider of websitebeheerder, wanneer je vragen hebt over deze instellingen. ";
-$a->strings["The database you specify below should already exist. If it does not, please create it before continuing."] = "De database die je hier opgeeft zou al moeten bestaan. Maak anders de database aan voordat je verder gaat.";
-$a->strings["Database Server Name"] = "Servernaam database";
-$a->strings["Database Login Name"] = "Gebruikersnaam database";
-$a->strings["Database Login Password"] = "Wachtwoord database";
-$a->strings["For security reasons the password must not be empty"] = "";
-$a->strings["Database Name"] = "Naam database";
-$a->strings["Site administrator email address"] = "E-mailadres van de websitebeheerder";
-$a->strings["Your account email address must match this in order to use the web admin panel."] = "Het e-mailadres van je account moet hiermee overeenkomen om het administratiepaneel te kunnen gebruiken.";
-$a->strings["Please select a default timezone for your website"] = "Selecteer een standaard tijdzone voor je website";
-$a->strings["Site settings"] = "Website-instellingen";
-$a->strings["System Language:"] = "";
-$a->strings["Set the default language for your Friendica installation interface and to send emails."] = "";
-$a->strings["The database configuration file \".htconfig.php\" could not be written. Please use the enclosed text to create a configuration file in your web server root."] = "Het databaseconfiguratiebestand \".htconfig.php\" kon niet worden weggeschreven. Je kunt de bijgevoegde tekst gebruiken om in een configuratiebestand aan te maken in de hoogste map van je webserver.";
-$a->strings["<h1>What next</h1>"] = "<h1>Wat nu</h1>";
-$a->strings["IMPORTANT: You will need to [manually] setup a scheduled task for the worker."] = "";
-$a->strings["Go to your new Friendica node <a href=\"%s/register\">registration page</a> and register as new user. Remember to use the same email you have entered as administrator email. This will allow you to enter the site admin panel."] = "";
-$a->strings["New Message"] = "Nieuw Bericht";
-$a->strings["Unable to locate contact information."] = "Ik kan geen contact informatie vinden.";
-$a->strings["Messages"] = "Privéberichten";
-$a->strings["Do you really want to delete this message?"] = "Wil je echt dit bericht verwijderen?";
-$a->strings["Message deleted."] = "Bericht verwijderd.";
-$a->strings["Conversation removed."] = "Gesprek verwijderd.";
-$a->strings["No messages."] = "Geen berichten.";
-$a->strings["Message not available."] = "Bericht niet beschikbaar.";
-$a->strings["Delete message"] = "Verwijder bericht";
-$a->strings["D, d M Y - g:i A"] = "D, d M Y - g:i A";
-$a->strings["Delete conversation"] = "Verwijder gesprek";
-$a->strings["No secure communications available. You <strong>may</strong> be able to respond from the sender's profile page."] = "Geen beveiligde communicatie beschikbaar. Je kunt <strong>misschien</strong> antwoorden vanaf de profiel-pagina van de afzender.";
-$a->strings["Send Reply"] = "Verstuur Antwoord";
-$a->strings["Unknown sender - %s"] = "Onbekende afzender - %s";
-$a->strings["You and %s"] = "Jij en %s";
-$a->strings["%s and You"] = "%s en jij";
-$a->strings["%d message"] = [
- 0 => "%d bericht",
- 1 => "%d berichten",
-];
-$a->strings["Group created."] = "Groep aangemaakt.";
-$a->strings["Could not create group."] = "Kon de groep niet aanmaken.";
-$a->strings["Group not found."] = "Groep niet gevonden.";
-$a->strings["Group name changed."] = "Groepsnaam gewijzigd.";
-$a->strings["Save Group"] = "Bewaar groep";
-$a->strings["Create a group of contacts/friends."] = "Maak een groep contacten/vrienden aan.";
-$a->strings["Group Name: "] = "Groepsnaam:";
-$a->strings["Group removed."] = "Groep verwijderd.";
-$a->strings["Unable to remove group."] = "Niet in staat om groep te verwijderen.";
-$a->strings["Delete Group"] = "";
-$a->strings["Group Editor"] = "Groepsbewerker";
-$a->strings["Edit Group Name"] = "";
-$a->strings["Members"] = "Leden";
-$a->strings["Group is empty"] = "De groep is leeg";
-$a->strings["Remove contact from group"] = "";
-$a->strings["Add contact to group"] = "";
-$a->strings["OpenID protocol error. No ID returned."] = "OpenID protocol fout. Geen ID Gevonden.";
-$a->strings["Account not found and OpenID registration is not permitted on this site."] = "Account niet gevonden, en OpenID-registratie is niet toegelaten op deze website.";
-$a->strings["Login failed."] = "Login mislukt.";
-$a->strings["Profile not found."] = "Profiel niet gevonden";
-$a->strings["This may occasionally happen if contact was requested by both persons and it has already been approved."] = "Dit kan soms gebeuren als het contact door beide personen werd gevraagd, en het werd al goedgekeurd.";
-$a->strings["Response from remote site was not understood."] = "Antwoord van de website op afstand werd niet begrepen.";
-$a->strings["Unexpected response from remote site: "] = "Onverwacht antwoord van website op afstand:";
-$a->strings["Confirmation completed successfully."] = "Bevestiging werd correct voltooid.";
-$a->strings["Temporary failure. Please wait and try again."] = "Tijdelijke fout. Wacht even en probeer opnieuw.";
-$a->strings["Introduction failed or was revoked."] = "Verzoek mislukt of herroepen.";
-$a->strings["Remote site reported: "] = "Website op afstand berichtte: ";
-$a->strings["Unable to set contact photo."] = "Ik kan geen contact foto instellen.";
-$a->strings["No user record found for '%s' "] = "Geen gebruiker gevonden voor '%s'";
-$a->strings["Our site encryption key is apparently messed up."] = "De encryptie-sleutel van onze webstek is blijkbaar beschadigd.";
-$a->strings["Empty site URL was provided or URL could not be decrypted by us."] = "Er werd een lege URL gegeven, of de URL kon niet ontcijferd worden door ons.";
-$a->strings["Contact record was not found for you on our site."] = "We vonden op onze webstek geen contactrecord voor jou.";
-$a->strings["Site public key not available in contact record for URL %s."] = "Publieke sleutel voor webstek niet beschikbaar in contactrecord voor URL %s.";
-$a->strings["The ID provided by your system is a duplicate on our system. It should work if you try again."] = "Het ID dat jouw systeem aangeeft is een dubbel op ons systeem. Als je opnieuw probeert zou het moeten werken.";
-$a->strings["Unable to set your contact credentials on our system."] = "Niet in staat om op dit systeem je contactreferenties in te stellen.";
-$a->strings["Unable to update your contact profile details on our system"] = "";
-$a->strings["[Name Withheld]"] = "[Naam achtergehouden]";
-$a->strings["This introduction has already been accepted."] = "Verzoek is al goedgekeurd";
-$a->strings["Profile location is not valid or does not contain profile information."] = "Profiel is ongeldig of bevat geen informatie";
-$a->strings["Warning: profile location has no identifiable owner name."] = "Waarschuwing: de profiellocatie heeft geen identificeerbare eigenaar.";
-$a->strings["Warning: profile location has no profile photo."] = "Waarschuwing: Profieladres heeft geen profielfoto.";
-$a->strings["%d required parameter was not found at the given location"] = [
- 0 => "De %d vereiste parameter is niet op het gegeven adres gevonden",
- 1 => "De %d vereiste parameters zijn niet op het gegeven adres gevonden",
-];
-$a->strings["Introduction complete."] = "Verzoek voltooid.";
-$a->strings["Unrecoverable protocol error."] = "Onherstelbare protocolfout. ";
-$a->strings["Profile unavailable."] = "Profiel onbeschikbaar";
-$a->strings["%s has received too many connection requests today."] = "%s heeft te veel verzoeken gehad vandaag.";
-$a->strings["Spam protection measures have been invoked."] = "Beveiligingsmaatregelen tegen spam zijn in werking getreden.";
-$a->strings["Friends are advised to please try again in 24 hours."] = "Wij adviseren vrienden om het over 24 uur nog een keer te proberen.";
-$a->strings["Invalid locator"] = "Ongeldige plaatsbepaler";
-$a->strings["You have already introduced yourself here."] = "Je hebt jezelf hier al voorgesteld.";
-$a->strings["Apparently you are already friends with %s."] = "Blijkbaar ben je al bevriend met %s.";
-$a->strings["Invalid profile URL."] = "Ongeldig profiel adres.";
-$a->strings["Disallowed profile URL."] = "Niet toegelaten profiel adres.";
-$a->strings["Your introduction has been sent."] = "Je verzoek is verzonden.";
-$a->strings["Remote subscription can't be done for your network. Please subscribe directly on your system."] = "";
-$a->strings["Please login to confirm introduction."] = "Log in om je verzoek te bevestigen.";
-$a->strings["Incorrect identity currently logged in. Please login to <strong>this</strong> profile."] = "Je huidige identiteit is niet de juiste. Log met <strong>dit</strong> profiel in.";
-$a->strings["Confirm"] = "Bevestig";
-$a->strings["Hide this contact"] = "Verberg dit contact";
-$a->strings["Welcome home %s."] = "Welkom terug %s.";
-$a->strings["Please confirm your introduction/connection request to %s."] = "Bevestig je vriendschaps-/connectieverzoek voor %s.";
-$a->strings["Please enter your 'Identity Address' from one of the following supported communications networks:"] = "Vul hier uw 'Identiteitsadres' in van een van de volgende ondersteunde communicatienetwerken:";
-$a->strings["If you are not yet a member of the free social web, <a href=\"%s\">follow this link to find a public Friendica site and join us today</a>."] = "";
-$a->strings["Friend/Connection Request"] = "Vriendschaps-/connectieverzoek";
-$a->strings["Examples: jojo@demo.friendica.com, http://demo.friendica.com/profile/jojo, testuser@gnusocial.de"] = "";
-$a->strings["Friendica"] = "Friendica";
-$a->strings["GNU Social (Pleroma, Mastodon)"] = "";
-$a->strings["Diaspora (Socialhome, Hubzilla)"] = "";
-$a->strings[" - please do not use this form. Instead, enter %s into your Diaspora search bar."] = "- Gebruik niet dit formulier. Vul %s in in je Diaspora zoekbalk.";
-$a->strings["Invalid request identifier."] = "Ongeldige <em>request identifier</em>.";
-$a->strings["Discard"] = "Verwerpen";
-$a->strings["Notifications"] = "Notificaties";
-$a->strings["Network Notifications"] = "Netwerknotificaties";
-$a->strings["Personal Notifications"] = "Persoonlijke notificaties";
-$a->strings["Home Notifications"] = "Tijdlijn-notificaties";
-$a->strings["Show Ignored Requests"] = "Toon genegeerde verzoeken";
-$a->strings["Hide Ignored Requests"] = "Verberg genegeerde verzoeken";
-$a->strings["Notification type: "] = "Notificatiesoort:";
-$a->strings["suggested by %s"] = "Voorgesteld door %s";
-$a->strings["Approve"] = "Goedkeuren";
-$a->strings["Claims to be known to you: "] = "Denkt dat je hem of haar kent:";
-$a->strings["yes"] = "Ja";
-$a->strings["no"] = "Nee";
-$a->strings["Shall your connection be bidirectional or not?"] = "";
-$a->strings["Accepting %s as a friend allows %s to subscribe to your posts, and you will also receive updates from them in your news feed."] = "";
-$a->strings["Accepting %s as a subscriber allows them to subscribe to your posts, but you will not receive updates from them in your news feed."] = "";
-$a->strings["Accepting %s as a sharer allows them to subscribe to your posts, but you will not receive updates from them in your news feed."] = "";
-$a->strings["Friend"] = "Vriend";
-$a->strings["Sharer"] = "Deler";
-$a->strings["Subscriber"] = "";
-$a->strings["No introductions."] = "Geen vriendschaps- of connectieverzoeken.";
-$a->strings["Show unread"] = "";
-$a->strings["Show all"] = "";
-$a->strings["No more %s notifications."] = "";
-$a->strings["Profile deleted."] = "Profiel verwijderd";
-$a->strings["Profile-"] = "Profiel-";
-$a->strings["New profile created."] = "Nieuw profiel aangemaakt.";
-$a->strings["Profile unavailable to clone."] = "Profiel niet beschikbaar om te klonen.";
-$a->strings["Profile Name is required."] = "Profielnaam is vereist.";
-$a->strings["Marital Status"] = "Echtelijke staat";
-$a->strings["Romantic Partner"] = "Romantische Partner";
-$a->strings["Work/Employment"] = "Werk";
-$a->strings["Religion"] = "Godsdienst";
-$a->strings["Political Views"] = "Politieke standpunten";
-$a->strings["Gender"] = "Geslacht";
-$a->strings["Sexual Preference"] = "Seksuele Voorkeur";
-$a->strings["XMPP"] = "";
-$a->strings["Homepage"] = "Tijdlijn";
-$a->strings["Interests"] = "Interesses";
-$a->strings["Address"] = "Adres";
-$a->strings["Location"] = "Plaats";
-$a->strings["Profile updated."] = "Profiel bijgewerkt.";
-$a->strings["Hide contacts and friends:"] = "";
-$a->strings["Hide your contact/friend list from viewers of this profile?"] = "Je vrienden/contacten verbergen voor bezoekers van dit profiel?";
-$a->strings["Show more profile fields:"] = "";
-$a->strings["Profile Actions"] = "";
-$a->strings["Edit Profile Details"] = "Profieldetails bewerken";
-$a->strings["Change Profile Photo"] = "Profielfoto wijzigen";
-$a->strings["View this profile"] = "Dit profiel bekijken";
-$a->strings["Edit visibility"] = "Pas zichtbaarheid aan";
-$a->strings["Create a new profile using these settings"] = "Nieuw profiel aanmaken met deze instellingen";
-$a->strings["Clone this profile"] = "Dit profiel klonen";
-$a->strings["Delete this profile"] = "Dit profiel verwijderen";
-$a->strings["Basic information"] = "";
-$a->strings["Profile picture"] = "";
-$a->strings["Preferences"] = "";
-$a->strings["Status information"] = "";
-$a->strings["Additional information"] = "";
-$a->strings["Personal"] = "Persoonlijk";
-$a->strings["Relation"] = "";
-$a->strings["Miscellaneous"] = "Diversen";
-$a->strings["Your Gender:"] = "Je Geslacht:";
-$a->strings["<span class=\"heart\">♥</span> Marital Status:"] = "<span class=\"heart\">♥</span> Echtelijke Staat:";
-$a->strings["Sexual Preference:"] = "Seksuele Voorkeur:";
-$a->strings["Example: fishing photography software"] = "Voorbeeld: vissen fotografie software";
-$a->strings["Profile Name:"] = "Profiel Naam:";
-$a->strings["Required"] = "Vereist";
-$a->strings["This is your <strong>public</strong> profile.<br />It <strong>may</strong> be visible to anybody using the internet."] = "Dit is jouw <strong>publiek</strong> profiel.<br />Het <strong>kan</strong> zichtbaar zijn voor iedereen op het internet.";
-$a->strings["Your Full Name:"] = "Je volledige naam:";
-$a->strings["Title/Description:"] = "Titel/Beschrijving:";
-$a->strings["Street Address:"] = "Postadres:";
-$a->strings["Locality/City:"] = "Gemeente/Stad:";
-$a->strings["Region/State:"] = "Regio/Staat:";
-$a->strings["Postal/Zip Code:"] = "Postcode:";
-$a->strings["Country:"] = "Land:";
-$a->strings["Age: "] = "Leeftijd:";
-$a->strings["Who: (if applicable)"] = "Wie: (indien toepasbaar)";
-$a->strings["Examples: cathy123, Cathy Williams, cathy@example.com"] = "Voorbeelden: Kathleen123, Kathleen Peeters, kathleen@voorbeeld.nl";
-$a->strings["Since [date]:"] = "Sinds [datum]:";
-$a->strings["Tell us about yourself..."] = "Vertel iets over jezelf...";
-$a->strings["XMPP (Jabber) address:"] = "";
-$a->strings["The XMPP address will be propagated to your contacts so that they can follow you."] = "";
-$a->strings["Homepage URL:"] = "Adres tijdlijn:";
-$a->strings["Hometown:"] = "Woonplaats:";
-$a->strings["Political Views:"] = "Politieke standpunten:";
-$a->strings["Religious Views:"] = "Geloof:";
-$a->strings["Public Keywords:"] = "Publieke Sleutelwoorden:";
-$a->strings["(Used for suggesting potential friends, can be seen by others)"] = "(Gebruikt om mogelijke vrienden voor te stellen, kan door anderen gezien worden)";
-$a->strings["Private Keywords:"] = "Privé Sleutelwoorden:";
-$a->strings["(Used for searching profiles, never shown to others)"] = "(Gebruikt om profielen te zoeken, nooit aan anderen getoond)";
-$a->strings["Likes:"] = "Houdt van:";
-$a->strings["Dislikes:"] = "Houdt niet van:";
-$a->strings["Musical interests"] = "Muzikale interesses";
-$a->strings["Books, literature"] = "Boeken, literatuur";
-$a->strings["Television"] = "Televisie";
-$a->strings["Film/dance/culture/entertainment"] = "Film/dans/cultuur/ontspanning";
-$a->strings["Hobbies/Interests"] = "Hobby's/Interesses";
-$a->strings["Love/romance"] = "Liefde/romance";
-$a->strings["Work/employment"] = "Werk";
-$a->strings["School/education"] = "School/opleiding";
-$a->strings["Contact information and Social Networks"] = "Contactinformatie en sociale netwerken";
-$a->strings["Profile Image"] = "Profiel afbeelding";
-$a->strings["visible to everybody"] = "zichtbaar voor iedereen";
-$a->strings["Edit/Manage Profiles"] = "Wijzig/Beheer Profielen";
-$a->strings["Change profile photo"] = "Profiel foto wijzigen";
-$a->strings["Create New Profile"] = "Maak nieuw profiel";
-$a->strings["Theme settings updated."] = "Thema-instellingen aangepast.";
-$a->strings["Information"] = "Informatie";
-$a->strings["Overview"] = "";
-$a->strings["Federation Statistics"] = "";
-$a->strings["Configuration"] = "";
-$a->strings["Site"] = "Website";
-$a->strings["Users"] = "Gebruiker";
-$a->strings["Addons"] = "";
-$a->strings["Themes"] = "Thema's";
-$a->strings["Additional features"] = "Extra functies";
-$a->strings["Terms of Service"] = "";
-$a->strings["Database"] = "";
-$a->strings["DB updates"] = "DB aanpassingen";
-$a->strings["Inspect Queue"] = "";
-$a->strings["Tools"] = "";
-$a->strings["Contact Blocklist"] = "";
-$a->strings["Server Blocklist"] = "";
-$a->strings["Delete Item"] = "";
-$a->strings["Logs"] = "Logs";
-$a->strings["View Logs"] = "";
-$a->strings["Diagnostics"] = "";
-$a->strings["PHP Info"] = "";
-$a->strings["probe address"] = "";
-$a->strings["check webfinger"] = "";
-$a->strings["Admin"] = "Beheer";
-$a->strings["Addon Features"] = "";
-$a->strings["User registrations waiting for confirmation"] = "Gebruikersregistraties wachten op bevestiging";
-$a->strings["Administration"] = "Beheer";
-$a->strings["Display Terms of Service"] = "";
-$a->strings["Enable the Terms of Service page. If this is enabled a link to the terms will be added to the registration form and the general information page."] = "";
-$a->strings["Display Privacy Statement"] = "";
-$a->strings["Show some informations regarding the needed information to operate the node according e.g. to <a href=\"%s\" target=\"_blank\">EU-GDPR</a>."] = "";
-$a->strings["Privacy Statement Preview"] = "";
-$a->strings["The Terms of Service"] = "";
-$a->strings["Enter the Terms of Service for your node here. You can use BBCode. Headers of sections should be [h2] and below."] = "";
-$a->strings["The blocked domain"] = "";
-$a->strings["The reason why you blocked this domain."] = "";
-$a->strings["Delete domain"] = "";
-$a->strings["Check to delete this entry from the blocklist"] = "";
-$a->strings["This page can be used to define a black list of servers from the federated network that are not allowed to interact with your node. For all entered domains you should also give a reason why you have blocked the remote server."] = "";
-$a->strings["The list of blocked servers will be made publically available on the /friendica page so that your users and people investigating communication problems can find the reason easily."] = "";
-$a->strings["Add new entry to block list"] = "";
-$a->strings["Server Domain"] = "";
-$a->strings["The domain of the new server to add to the block list. Do not include the protocol."] = "";
-$a->strings["Block reason"] = "";
-$a->strings["Add Entry"] = "";
-$a->strings["Save changes to the blocklist"] = "";
-$a->strings["Current Entries in the Blocklist"] = "";
-$a->strings["Delete entry from blocklist"] = "";
-$a->strings["Delete entry from blocklist?"] = "";
-$a->strings["Server added to blocklist."] = "";
-$a->strings["Site blocklist updated."] = "";
-$a->strings["The contact has been blocked from the node"] = "";
-$a->strings["Could not find any contact entry for this URL (%s)"] = "";
-$a->strings["%s contact unblocked"] = [
- 0 => "",
- 1 => "",
-];
-$a->strings["Remote Contact Blocklist"] = "";
-$a->strings["This page allows you to prevent any message from a remote contact to reach your node."] = "";
-$a->strings["Block Remote Contact"] = "";
-$a->strings["select all"] = "Alles selecteren";
-$a->strings["select none"] = "";
-$a->strings["No remote contact is blocked from this node."] = "";
-$a->strings["Blocked Remote Contacts"] = "";
-$a->strings["Block New Remote Contact"] = "";
-$a->strings["Photo"] = "";
-$a->strings["%s total blocked contact"] = [
- 0 => "",
- 1 => "",
-];
-$a->strings["URL of the remote contact to block."] = "";
-$a->strings["Delete this Item"] = "";
-$a->strings["On this page you can delete an item from your node. If the item is a top level posting, the entire thread will be deleted."] = "";
-$a->strings["You need to know the GUID of the item. You can find it e.g. by looking at the display URL. The last part of http://example.com/display/123456 is the GUID, here 123456."] = "";
-$a->strings["GUID"] = "";
-$a->strings["The GUID of the item you want to delete."] = "";
-$a->strings["Item marked for deletion."] = "";
-$a->strings["unknown"] = "";
-$a->strings["This page offers you some numbers to the known part of the federated social network your Friendica node is part of. These numbers are not complete but only reflect the part of the network your node is aware of."] = "";
-$a->strings["The <em>Auto Discovered Contact Directory</em> feature is not enabled, it will improve the data displayed here."] = "";
-$a->strings["Currently this node is aware of %d nodes with %d registered users from the following platforms:"] = "";
-$a->strings["ID"] = "ID";
-$a->strings["Recipient Name"] = "";
-$a->strings["Recipient Profile"] = "";
-$a->strings["Network"] = "Netwerk";
-$a->strings["Created"] = "";
-$a->strings["Last Tried"] = "";
-$a->strings["This page lists the content of the queue for outgoing postings. These are postings the initial delivery failed for. They will be resend later and eventually deleted if the delivery fails permanently."] = "";
-$a->strings["Your DB still runs with MyISAM tables. You should change the engine type to InnoDB. As Friendica will use InnoDB only features in the future, you should change this! See <a href=\"%s\">here</a> for a guide that may be helpful converting the table engines. You may also use the command <tt>php bin/console.php dbstructure toinnodb</tt> of your Friendica installation for an automatic conversion.<br />"] = "";
-$a->strings["There is a new version of Friendica available for download. Your current version is %1\$s, upstream version is %2\$s"] = "";
-$a->strings["The database update failed. Please run \"php bin/console.php dbstructure update\" from the command line and have a look at the errors that might appear."] = "";
-$a->strings["The worker was never executed. Please check your database structure!"] = "";
-$a->strings["The last worker execution was on %s UTC. This is older than one hour. Please check your crontab settings."] = "";
-$a->strings["Normal Account"] = "Normaal account";
-$a->strings["Automatic Follower Account"] = "";
-$a->strings["Public Forum Account"] = "";
-$a->strings["Automatic Friend Account"] = "Automatisch Vriendschapsaccount";
-$a->strings["Blog Account"] = "Blog Account";
-$a->strings["Private Forum Account"] = "";
-$a->strings["Message queues"] = "Bericht-wachtrijen";
-$a->strings["Summary"] = "Samenvatting";
-$a->strings["Registered users"] = "Geregistreerde gebruikers";
-$a->strings["Pending registrations"] = "Registraties die in de wacht staan";
-$a->strings["Version"] = "Versie";
-$a->strings["Active addons"] = "";
-$a->strings["Can not parse base url. Must have at least <scheme>://<domain>"] = "";
-$a->strings["Site settings updated."] = "Site instellingen gewijzigd.";
-$a->strings["No special theme for mobile devices"] = "Geen speciaal thema voor mobiele apparaten";
-$a->strings["No community page for local users"] = "";
-$a->strings["No community page"] = "";
-$a->strings["Public postings from users of this site"] = "";
-$a->strings["Public postings from the federated network"] = "";
-$a->strings["Public postings from local users and the federated network"] = "";
-$a->strings["Users, Global Contacts"] = "";
-$a->strings["Users, Global Contacts/fallback"] = "";
-$a->strings["One month"] = "";
-$a->strings["Three months"] = "";
-$a->strings["Half a year"] = "";
-$a->strings["One year"] = "";
-$a->strings["Multi user instance"] = "Server voor meerdere gebruikers";
-$a->strings["Closed"] = "Gesloten";
-$a->strings["Requires approval"] = "Toestemming vereist";
-$a->strings["Open"] = "Open";
-$a->strings["No SSL policy, links will track page SSL state"] = "Geen SSL beleid, links zullen SSL status van pagina volgen";
-$a->strings["Force all links to use SSL"] = "Verplicht alle links om SSL te gebruiken";
-$a->strings["Self-signed certificate, use SSL for local links only (discouraged)"] = "Zelf-ondertekend certificaat, gebruik SSL alleen voor lokale links (afgeraden)";
-$a->strings["Don't check"] = "";
-$a->strings["check the stable version"] = "";
-$a->strings["check the development version"] = "";
-$a->strings["Republish users to directory"] = "";
-$a->strings["Registration"] = "Registratie";
-$a->strings["File upload"] = "Uploaden bestand";
-$a->strings["Policies"] = "Beleid";
-$a->strings["Auto Discovered Contact Directory"] = "";
-$a->strings["Performance"] = "Performantie";
-$a->strings["Worker"] = "";
-$a->strings["Message Relay"] = "";
-$a->strings["Relocate - WARNING: advanced function. Could make this server unreachable."] = "";
-$a->strings["Site name"] = "Site naam";
-$a->strings["Host name"] = "";
-$a->strings["Sender Email"] = "";
-$a->strings["The email address your server shall use to send notification emails from."] = "";
-$a->strings["Banner/Logo"] = "Banner/Logo";
-$a->strings["Shortcut icon"] = "";
-$a->strings["Link to an icon that will be used for browsers."] = "";
-$a->strings["Touch icon"] = "Pictogram voor smartphones";
-$a->strings["Link to an icon that will be used for tablets and mobiles."] = "";
-$a->strings["Additional Info"] = "";
-$a->strings["For public servers: you can add additional information here that will be listed at %s/servers."] = "";
-$a->strings["System language"] = "Systeemtaal";
-$a->strings["System theme"] = "Systeem thema";
-$a->strings["Default system theme - may be over-ridden by user profiles - <a href='#' id='cnftheme'>change theme settings</a>"] = "Standaard systeem thema - kan door gebruikersprofielen veranderd worden - <a href='#' id='cnftheme'>verander thema instellingen</a>";
-$a->strings["Mobile system theme"] = "Mobiel systeem thema";
-$a->strings["Theme for mobile devices"] = "Thema voor mobiele apparaten";
-$a->strings["SSL link policy"] = "Beleid SSL-links";
-$a->strings["Determines whether generated links should be forced to use SSL"] = "Bepaald of gegenereerde verwijzingen verplicht SSL moeten gebruiken";
-$a->strings["Force SSL"] = "";
-$a->strings["Force all Non-SSL requests to SSL - Attention: on some systems it could lead to endless loops."] = "";
-$a->strings["Hide help entry from navigation menu"] = "Verberg de 'help' uit het navigatiemenu";
-$a->strings["Hides the menu entry for the Help pages from the navigation menu. You can still access it calling /help directly."] = "Verbergt het menu-item voor de Help pagina's uit het navigatiemenu. Je kunt ze nog altijd vinden door /help direct in te geven.";
-$a->strings["Single user instance"] = "Server voor één gebruiker";
-$a->strings["Make this instance multi-user or single-user for the named user"] = "Stel deze server in voor meerdere gebruikers, of enkel voor de geselecteerde gebruiker.";
-$a->strings["Maximum image size"] = "Maximum afbeeldingsgrootte";
-$a->strings["Maximum size in bytes of uploaded images. Default is 0, which means no limits."] = "Maximum afmeting in bytes van afbeeldingen. Standaard is 0, dus geen beperking.";
-$a->strings["Maximum image length"] = "Maximum afbeeldingslengte";
-$a->strings["Maximum length in pixels of the longest side of uploaded images. Default is -1, which means no limits."] = "Maximum lengte in pixels van de langste kant van afbeeldingen. Standaard is -1, dus geen beperkingen.";
-$a->strings["JPEG image quality"] = "JPEG afbeeldingskwaliteit";
-$a->strings["Uploaded JPEGS will be saved at this quality setting [0-100]. Default is 100, which is full quality."] = "JPEGS zullen met deze kwaliteitsinstelling bewaard worden [0-100]. Standaard is 100, dit is volledige kwaliteit.";
-$a->strings["Register policy"] = "Registratiebeleid";
-$a->strings["Maximum Daily Registrations"] = "Maximum aantal registraties per dag";
-$a->strings["If registration is permitted above, this sets the maximum number of new user registrations to accept per day. If register is set to closed, this setting has no effect."] = "Als registratie hierboven is toegelaten, zet dit het maximum aantal registraties van nieuwe gebruikers per dag. Als registratie niet is toegelaten heeft deze instelling geen effect.";
-$a->strings["Register text"] = "Registratietekst";
-$a->strings["Will be displayed prominently on the registration page. You can use BBCode here."] = "";
-$a->strings["Accounts abandoned after x days"] = "Verlaten accounts na x dagen";
-$a->strings["Will not waste system resources polling external sites for abandonded accounts. Enter 0 for no time limit."] = "Dit zal geen systeembronnen verspillen aan het nakijken van externe sites voor verlaten accounts. Geef 0 is voor geen tijdslimiet.";
-$a->strings["Allowed friend domains"] = "Toegelaten vriend domeinen";
-$a->strings["Comma separated list of domains which are allowed to establish friendships with this site. Wildcards are accepted. Empty to allow any domains"] = "Komma-gescheiden lijst van domeinen die een vriendschapsband met deze website mogen aangaan. Jokers zijn toegelaten. Laat leeg om alle domeinen toe te laten.";
-$a->strings["Allowed email domains"] = "Toegelaten e-mail domeinen";
-$a->strings["Comma separated list of domains which are allowed in email addresses for registrations to this site. Wildcards are accepted. Empty to allow any domains"] = "Door komma's gescheiden lijst met e-maildomeinen die op deze website mogen registeren. Wildcards zijn toegestaan.\nLeeg laten om alle domeinen toe te staan.";
-$a->strings["No OEmbed rich content"] = "";
-$a->strings["Don't show the rich content (e.g. embedded PDF), except from the domains listed below."] = "";
-$a->strings["Allowed OEmbed domains"] = "";
-$a->strings["Comma separated list of domains which oembed content is allowed to be displayed. Wildcards are accepted."] = "";
-$a->strings["Block public"] = "Openbare toegang blokkeren";
-$a->strings["Check to block public access to all otherwise public personal pages on this site unless you are currently logged in."] = "Kruis dit aan om alle openbare persoonlijke pagina's alleen toegankelijk te maken voor ingelogde gebruikers.";
-$a->strings["Force publish"] = "Dwing publiceren af";
-$a->strings["Check to force all profiles on this site to be listed in the site directory."] = "Kruis dit aan om af te dwingen dat alle profielen op deze website in de gids van deze website gepubliceerd worden.";
-$a->strings["Enabling this may violate privacy laws like the GDPR"] = "";
-$a->strings["Global directory URL"] = "";
-$a->strings["URL to the global directory. If this is not set, the global directory is completely unavailable to the application."] = "";
-$a->strings["Private posts by default for new users"] = "Privéberichten als standaard voor nieuwe gebruikers";
-$a->strings["Set default post permissions for all new members to the default privacy group rather than public."] = "Stel de standaardrechten van berichten voor nieuwe leden op de standaard privacygroep in, in plaats van openbaar.";
-$a->strings["Don't include post content in email notifications"] = "De inhoud van het bericht niet insluiten bij e-mailnotificaties";
-$a->strings["Don't include the content of a post/comment/private message/etc. in the email notifications that are sent out from this site, as a privacy measure."] = "De inhoud van berichten/commentaar/privéberichten/enzovoort niet insluiten in e-mailnotificaties die door deze website verzonden worden, voor de bescherming van je privacy.";
-$a->strings["Disallow public access to addons listed in the apps menu."] = "";
-$a->strings["Checking this box will restrict addons listed in the apps menu to members only."] = "";
-$a->strings["Don't embed private images in posts"] = "";
-$a->strings["Don't replace locally-hosted private photos in posts with an embedded copy of the image. This means that contacts who receive posts containing private photos will have to authenticate and load each image, which may take a while."] = "";
-$a->strings["Allow Users to set remote_self"] = "";
-$a->strings["With checking this, every user is allowed to mark every contact as a remote_self in the repair contact dialog. Setting this flag on a contact causes mirroring every posting of that contact in the users stream."] = "";
-$a->strings["Block multiple registrations"] = "Blokkeer meerdere registraties";
-$a->strings["Disallow users to register additional accounts for use as pages."] = "Laat niet toe dat gebruikers meerdere accounts aanmaken.";
-$a->strings["OpenID support"] = "OpenID ondersteuning";
-$a->strings["OpenID support for registration and logins."] = "OpenID ondersteuning voor registraties en logins.";
-$a->strings["Fullname check"] = "Controleer volledige naam";
-$a->strings["Force users to register with a space between firstname and lastname in Full name, as an antispam measure"] = "Verplicht gebruikers om zich te registreren met een spatie tussen voornaam en achternaam, als anti-spam maatregel";
-$a->strings["Community pages for visitors"] = "";
-$a->strings["Which community pages should be available for visitors. Local users always see both pages."] = "";
-$a->strings["Posts per user on community page"] = "";
-$a->strings["The maximum number of posts per user on the community page. (Not valid for 'Global Community')"] = "";
-$a->strings["Enable OStatus support"] = "Activeer OStatus ondersteuning";
-$a->strings["Provide built-in OStatus (StatusNet, GNU Social etc.) compatibility. All communications in OStatus are public, so privacy warnings will be occasionally displayed."] = "";
-$a->strings["Only import OStatus threads from our contacts"] = "";
-$a->strings["Normally we import every content from our OStatus contacts. With this option we only store threads that are started by a contact that is known on our system."] = "";
-$a->strings["OStatus support can only be enabled if threading is enabled."] = "";
-$a->strings["Diaspora support can't be enabled because Friendica was installed into a sub directory."] = "";
-$a->strings["Enable Diaspora support"] = "Activeer Diaspora ondersteuning";
-$a->strings["Provide built-in Diaspora network compatibility."] = "Bied ingebouwde ondersteuning voor het Diaspora netwerk.";
-$a->strings["Only allow Friendica contacts"] = "Laat alleen Friendica contacten toe";
-$a->strings["All contacts must use Friendica protocols. All other built-in communication protocols disabled."] = "Alle contacten moeten een Friendica protocol gebruiken. Alle andere ingebouwde communicatieprotocols worden uitgeschakeld.";
-$a->strings["Verify SSL"] = "Controleer SSL";
-$a->strings["If you wish, you can turn on strict certificate checking. This will mean you cannot connect (at all) to self-signed SSL sites."] = "Als je wilt kun je striktere certificaat controle activeren. Dit betekent dat je (totaal) niet kunt connecteren met sites die zelf-ondertekende SSL certificaten gebruiken.";
-$a->strings["Proxy user"] = "Proxy-gebruiker";
-$a->strings["Proxy URL"] = "Proxy-URL";
-$a->strings["Network timeout"] = "Netwerk timeout";
-$a->strings["Value is in seconds. Set to 0 for unlimited (not recommended)."] = "Waarde is in seconden. Zet op 0 voor onbeperkt (niet aanbevolen).";
-$a->strings["Maximum Load Average"] = "Maximum gemiddelde belasting";
-$a->strings["Maximum system load before delivery and poll processes are deferred - default 50."] = "Maximum systeembelasting voordat aflever- en poll-processen uitgesteld worden - standaard 50.";
-$a->strings["Maximum Load Average (Frontend)"] = "";
-$a->strings["Maximum system load before the frontend quits service - default 50."] = "";
-$a->strings["Minimal Memory"] = "";
-$a->strings["Minimal free memory in MB for the worker. Needs access to /proc/meminfo - default 0 (deactivated)."] = "";
-$a->strings["Maximum table size for optimization"] = "";
-$a->strings["Maximum table size (in MB) for the automatic optimization. Enter -1 to disable it."] = "";
-$a->strings["Minimum level of fragmentation"] = "";
-$a->strings["Minimum fragmenation level to start the automatic optimization - default value is 30%."] = "";
-$a->strings["Periodical check of global contacts"] = "";
-$a->strings["If enabled, the global contacts are checked periodically for missing or outdated data and the vitality of the contacts and servers."] = "";
-$a->strings["Days between requery"] = "";
-$a->strings["Number of days after which a server is requeried for his contacts."] = "";
-$a->strings["Discover contacts from other servers"] = "";
-$a->strings["Periodically query other servers for contacts. You can choose between 'users': the users on the remote system, 'Global Contacts': active contacts that are known on the system. The fallback is meant for Redmatrix servers and older friendica servers, where global contacts weren't available. The fallback increases the server load, so the recommened setting is 'Users, Global Contacts'."] = "";
-$a->strings["Timeframe for fetching global contacts"] = "";
-$a->strings["When the discovery is activated, this value defines the timeframe for the activity of the global contacts that are fetched from other servers."] = "";
-$a->strings["Search the local directory"] = "";
-$a->strings["Search the local directory instead of the global directory. When searching locally, every search will be executed on the global directory in the background. This improves the search results when the search is repeated."] = "";
-$a->strings["Publish server information"] = "";
-$a->strings["If enabled, general server and usage data will be published. The data contains the name and version of the server, number of users with public profiles, number of posts and the activated protocols and connectors. See <a href='http://the-federation.info/'>the-federation.info</a> for details."] = "";
-$a->strings["Check upstream version"] = "";
-$a->strings["Enables checking for new Friendica versions at github. If there is a new version, you will be informed in the admin panel overview."] = "";
-$a->strings["Suppress Tags"] = "";
-$a->strings["Suppress showing a list of hashtags at the end of the posting."] = "";
-$a->strings["Clean database"] = "";
-$a->strings["Remove old remote items, orphaned database records and old content from some other helper tables."] = "";
-$a->strings["Lifespan of remote items"] = "";
-$a->strings["When the database cleanup is enabled, this defines the days after which remote items will be deleted. Own items, and marked or filed items are always kept. 0 disables this behaviour."] = "";
-$a->strings["Lifespan of unclaimed items"] = "";
-$a->strings["When the database cleanup is enabled, this defines the days after which unclaimed remote items (mostly content from the relay) will be deleted. Default value is 90 days. Defaults to the general lifespan value of remote items if set to 0."] = "";
-$a->strings["Path to item cache"] = "Pad naar cache voor items";
-$a->strings["The item caches buffers generated bbcode and external images."] = "";
-$a->strings["Cache duration in seconds"] = "Cache tijdsduur in seconden";
-$a->strings["How long should the cache files be hold? Default value is 86400 seconds (One day). To disable the item cache, set the value to -1."] = "";
-$a->strings["Maximum numbers of comments per post"] = "";
-$a->strings["How much comments should be shown for each post? Default value is 100."] = "";
-$a->strings["Temp path"] = "Tijdelijk pad";
-$a->strings["If you have a restricted system where the webserver can't access the system temp path, enter another path here."] = "";
-$a->strings["Base path to installation"] = "Basispad voor installatie";
-$a->strings["If the system cannot detect the correct path to your installation, enter the correct path here. This setting should only be set if you are using a restricted system and symbolic links to your webroot."] = "";
-$a->strings["Disable picture proxy"] = "";
-$a->strings["The picture proxy increases performance and privacy. It shouldn't be used on systems with very low bandwith."] = "";
-$a->strings["Only search in tags"] = "";
-$a->strings["On large systems the text search can slow down the system extremely."] = "";
-$a->strings["New base url"] = "";
-$a->strings["Change base url for this server. Sends relocate message to all Friendica and Diaspora* contacts of all users."] = "";
-$a->strings["RINO Encryption"] = "";
-$a->strings["Encryption layer between nodes."] = "";
-$a->strings["Enabled"] = "";
-$a->strings["Maximum number of parallel workers"] = "";
-$a->strings["On shared hosters set this to 2. On larger systems, values of 10 are great. Default value is 4."] = "";
-$a->strings["Don't use 'proc_open' with the worker"] = "";
-$a->strings["Enable this if your system doesn't allow the use of 'proc_open'. This can happen on shared hosters. If this is enabled you should increase the frequency of worker calls in your crontab."] = "";
-$a->strings["Enable fastlane"] = "";
-$a->strings["When enabed, the fastlane mechanism starts an additional worker if processes with higher priority are blocked by processes of lower priority."] = "";
-$a->strings["Enable frontend worker"] = "";
-$a->strings["When enabled the Worker process is triggered when backend access is performed \\x28e.g. messages being delivered\\x29. On smaller sites you might want to call %s/worker on a regular basis via an external cron job. You should only enable this option if you cannot utilize cron/scheduled jobs on your server."] = "";
-$a->strings["Subscribe to relay"] = "";
-$a->strings["Enables the receiving of public posts from the relay. They will be included in the search, subscribed tags and on the global community page."] = "";
-$a->strings["Relay server"] = "";
-$a->strings["Address of the relay server where public posts should be send to. For example https://relay.diasp.org"] = "";
-$a->strings["Direct relay transfer"] = "";
-$a->strings["Enables the direct transfer to other servers without using the relay servers"] = "";
-$a->strings["Relay scope"] = "";
-$a->strings["Can be 'all' or 'tags'. 'all' means that every public post should be received. 'tags' means that only posts with selected tags should be received."] = "";
-$a->strings["all"] = "";
-$a->strings["tags"] = "";
-$a->strings["Server tags"] = "";
-$a->strings["Comma separated list of tags for the 'tags' subscription."] = "";
-$a->strings["Allow user tags"] = "";
-$a->strings["If enabled, the tags from the saved searches will used for the 'tags' subscription in addition to the 'relay_server_tags'."] = "";
-$a->strings["Update has been marked successful"] = "Wijziging succesvol gemarkeerd ";
-$a->strings["Database structure update %s was successfully applied."] = "";
-$a->strings["Executing of database structure update %s failed with error: %s"] = "";
-$a->strings["Executing %s failed with error: %s"] = "";
-$a->strings["Update %s was successfully applied."] = "Wijziging %s geslaagd.";
-$a->strings["Update %s did not return a status. Unknown if it succeeded."] = "Wijziging %s gaf geen status terug. We weten niet of de wijziging geslaagd is.";
-$a->strings["There was no additional update function %s that needed to be called."] = "";
-$a->strings["No failed updates."] = "Geen mislukte wijzigingen";
-$a->strings["Check database structure"] = "";
-$a->strings["Failed Updates"] = "Mislukte wijzigingen";
-$a->strings["This does not include updates prior to 1139, which did not return a status."] = "Dit is zonder de wijzigingen voor 1139, welke geen status teruggaven.";
-$a->strings["Mark success (if update was manually applied)"] = "Markeren als succes (als aanpassing manueel doorgevoerd werd)";
-$a->strings["Attempt to execute this update step automatically"] = "Probeer deze stap automatisch uit te voeren";
-$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tthe administrator of %2\$s has set up an account for you."] = "";
-$a->strings["\n\t\t\tThe login details are as follows:\n\n\t\t\tSite Location:\t%1\$s\n\t\t\tLogin Name:\t\t%2\$s\n\t\t\tPassword:\t\t%3\$s\n\n\t\t\tYou may change your password from your account \"Settings\" page after logging\n\t\t\tin.\n\n\t\t\tPlease take a few moments to review the other account settings on that page.\n\n\t\t\tYou may also wish to add some basic information to your default profile\n\t\t\t(on the \"Profiles\" page) so that other people can easily find you.\n\n\t\t\tWe recommend setting your full name, adding a profile photo,\n\t\t\tadding some profile \"keywords\" (very useful in making new friends) - and\n\t\t\tperhaps what country you live in; if you do not wish to be more specific\n\t\t\tthan that.\n\n\t\t\tWe fully respect your right to privacy, and none of these items are necessary.\n\t\t\tIf you are new and do not know anybody here, they may help\n\t\t\tyou to make some new and interesting friends.\n\n\t\t\tIf you ever want to delete your account, you can do so at %1\$s/removeme\n\n\t\t\tThank you and welcome to %4\$s."] = "";
-$a->strings["Registration details for %s"] = "Registratie details voor %s";
-$a->strings["%s user blocked/unblocked"] = [
- 0 => "%s gebruiker geblokkeerd/niet geblokkeerd",
- 1 => "%s gebruikers geblokkeerd/niet geblokkeerd",
-];
-$a->strings["%s user deleted"] = [
- 0 => "%s gebruiker verwijderd",
- 1 => "%s gebruikers verwijderd",