+$a->strings["Addon not found."] = "Addon niet gevonden.";
+$a->strings["Addon %s disabled."] = "Addon %s gedeactiveerd";
+$a->strings["Addon %s enabled."] = "Addon %s geactiveerd";
+$a->strings["Disable"] = "Uitschakelen";
+$a->strings["Enable"] = "Inschakelen";
+$a->strings["Administration"] = "Beheer";
+$a->strings["Addons"] = "Addons";
+$a->strings["Toggle"] = "Schakelaar";
+$a->strings["Author: "] = "Auteur:";
+$a->strings["Maintainer: "] = "Onderhoud:";
+$a->strings["Addon %s failed to install."] = "Installatie Addon %s is mislukt.";
+$a->strings["Reload active addons"] = "Herlaad actieve addons";
+$a->strings["There are currently no addons available on your node. You can find the official addon repository at %1\$s and might find other interesting addons in the open addon registry at %2\$s"] = "Er zijn op je node momenteel geen addons beschikbaar. Je kan de officiële addon repository vinden op %1\$s en je kan mogelijks nog andere interessante addons vinden in de open addon registry op %2\$s";
+$a->strings["The contact has been blocked from the node"] = "Het contact is geblokkeerd van deze node";
+$a->strings["Could not find any contact entry for this URL (%s)"] = "Kon geen contact vinden op deze URL (%s)";
+$a->strings["%s contact unblocked"] = [
+ 0 => "%s contact is niet langer geblokkeerd",
+ 1 => "%s contacten zijn niet langer geblokkeerd",
+];
+$a->strings["Remote Contact Blocklist"] = "Remote Contact Blokkeerlijst";
+$a->strings["This page allows you to prevent any message from a remote contact to reach your node."] = "De pagina laat je toe om te vermijden dat boodschappen van een remote contact je node bereiken.";
+$a->strings["Block Remote Contact"] = "Blokkeer Remote Contact";
+$a->strings["select all"] = "Alles selecteren";
+$a->strings["select none"] = "selecteer geen";
+$a->strings["Unblock"] = "Blokkering opheffen";
+$a->strings["No remote contact is blocked from this node."] = "Geen enkel remote contact is geblokkeerd van deze node.";
+$a->strings["Blocked Remote Contacts"] = "Geblokkeerde Remote Contacts";
+$a->strings["Block New Remote Contact"] = "Blokkeer Nieuwe Remote Contacten";
+$a->strings["Photo"] = "Foto";
+$a->strings["Reason"] = "Reden";
+$a->strings["%s total blocked contact"] = [
+ 0 => "%s geblokkeerde contacten in totaal",
+ 1 => "%s geblokkeerde contacten in totaal",
+];
+$a->strings["URL of the remote contact to block."] = "URL van de remote contact die je wil blokkeren.";
+$a->strings["Block Reason"] = "Reden voor blokkeren";
+$a->strings["Reason for the block"] = "Reden van de blokkering";
+$a->strings["Check to delete this entry from the blocklist"] = "Vink aan om dit item van de blokkeerlijst te verwijderen";
+$a->strings["Add new entry to block list"] = "Voeg nieuw item toe aan de blokkeerlijst";
+$a->strings["Block reason"] = "Reden voor blokkering";
+$a->strings["Add Entry"] = "Voeg Item toe";
+$a->strings["Save changes to the blocklist"] = "Sla veranderingen in de blokkeerlijst op";
+$a->strings["Current Entries in the Blocklist"] = "Huidige Items in de blokkeerlijst";
+$a->strings["Delete entry from blocklist"] = "Verwijder item uit de blokkeerlijst";
+$a->strings["Delete entry from blocklist?"] = "Item verwijderen uit de blokkeerlijst?";
+$a->strings["Item marked for deletion."] = "Item gemarkeerd om te verwijderen.";
+$a->strings["Delete Item"] = "Verwijder Item";
+$a->strings["Delete this Item"] = "Verwijder dit Item";
+$a->strings["On this page you can delete an item from your node. If the item is a top level posting, the entire thread will be deleted."] = "Op deze pagina kan je een item van je node verwijderen. Als het item een bericht is op het eerste niveau, dan zal de hele gesprek verwijderd worden.";
+$a->strings["You need to know the GUID of the item. You can find it e.g. by looking at the display URL. The last part of http://example.com/display/123456 is the GUID, here 123456."] = "Je moet de GUID van het item kennen. Je kan het terugvinden bvb. door te kijken naar de getoonde URL. Het laatste deel van http://example.com/display/123456 is de GUID, hier 123456.";
+$a->strings["GUID"] = "GUID";
+$a->strings["The GUID of the item you want to delete."] = "De GUID van het item dat je wil verwijderen.";
+$a->strings["Item Guid"] = "Item identificatie";
+$a->strings["Error trying to open <strong>%1\$s</strong> log file.\\r\\n<br/>Check to see if file %1\$s exist and is readable."] = "Fout bij het openen van log file <strong>%1\$s</strong> .\\r\\n<br/>Kijk na of bestand %1\$s bestaat en mag gelezen worden.";
+$a->strings["Couldn't open <strong>%1\$s</strong> log file.\\r\\n<br/>Check to see if file %1\$s is readable."] = "Kon log file <strong>%1\$s</strong> niet openen.\\r\\n<br/>Kijk na of bestand %1\$s mag gelezen worden.";
+$a->strings["View Logs"] = "Bekijk Logs";
+$a->strings["PHP log currently enabled."] = "PHP log momenteel geactiveerd";
+$a->strings["PHP log currently disabled."] = "PHP log momenteel gedeactiveerd";
+$a->strings["Logs"] = "Logs";
+$a->strings["Clear"] = "Wis";
+$a->strings["Enable Debugging"] = "Activeer Debugging";
+$a->strings["Log file"] = "Logbestand";
+$a->strings["Must be writable by web server. Relative to your Friendica top-level directory."] = "De webserver moet hier kunnen schrijven. Relatief t.o.v. de hoogste folder binnen je Friendica-installatie.";
+$a->strings["Log level"] = "Log niveau";
+$a->strings["PHP logging"] = "PHP logging";
+$a->strings["To temporarily enable logging of PHP errors and warnings you can prepend the following to the index.php file of your installation. The filename set in the 'error_log' line is relative to the friendica top-level directory and must be writeable by the web server. The option '1' for 'log_errors' and 'display_errors' is to enable these options, set to '0' to disable them."] = "Om logging van PHP fouten en waarschuwingen te activeren, kan je het volgende toevoegen aan het begin van je index.php bestand van je installatie. De naam van het bestand die ingesteld is in de 'error_log' lijn is relatief tegenover de friendica top-level folder en de server moet erin kunnen schrijven. De optie '1' voor 'log_errors' en 'display_errors' activeert deze opties, configureer '0' om ze te deactiveren. ";
+$a->strings["Theme %s disabled."] = "Thema %s uitgeschakeld.";
+$a->strings["Theme %s successfully enabled."] = "Thema %s succesvol ingeschakeld.";
+$a->strings["Theme %s failed to install."] = "Thema %s installatie mislukt.";
+$a->strings["Screenshot"] = "Schermafdruk";
+$a->strings["Themes"] = "Thema's";
+$a->strings["Unknown theme."] = "Onbekend thema.";
+$a->strings["Reload active themes"] = "Herlaad actieve thema's";
+$a->strings["No themes found on the system. They should be placed in %1\$s"] = "Geen thema's gevonden op het systeem. Ze zouden zich moeten bevinden in %1\$s";
+$a->strings["[Experimental]"] = "[Experimenteel]";
+$a->strings["[Unsupported]"] = "[Niet ondersteund]";
+$a->strings["Inspect Deferred Worker Queue"] = "Inspecteer wachtrij van uitgestelde workers";
+$a->strings["This page lists the deferred worker jobs. This are jobs that couldn't be executed at the first time."] = "Deze pagine geeft alle uitgestelde workertaken. Dit zijn taken die niet onmiddelijk konden worden uitgevoerd";
+$a->strings["Inspect Worker Queue"] = "Taakwachtrij inspecteren";
+$a->strings["This page lists the currently queued worker jobs. These jobs are handled by the worker cronjob you've set up during install."] = "Deze pagina toont alle taken in de wachtrij. Deze taken worden behandeld door de geplande taak die je hebt ingesteld tijdens installatie.";
+$a->strings["ID"] = "ID";
+$a->strings["Job Parameters"] = "Taak parameters";
+$a->strings["Created"] = "Aangemaakt";
+$a->strings["Priority"] = "Prioriteit";
+$a->strings["Update has been marked successful"] = "Wijziging succesvol gemarkeerd ";
+$a->strings["Database structure update %s was successfully applied."] = "Database structuur update %s werd met succes toegepast.";
+$a->strings["Executing of database structure update %s failed with error: %s"] = "Uitvoering van de database structuur update %s is mislukt met fout: %s";
+$a->strings["Executing %s failed with error: %s"] = "Uitvoering van %s mislukt met fout: %s";
+$a->strings["Update %s was successfully applied."] = "Wijziging %s geslaagd.";
+$a->strings["Update %s did not return a status. Unknown if it succeeded."] = "Wijziging %s gaf geen status terug. We weten niet of de wijziging geslaagd is.";
+$a->strings["There was no additional update function %s that needed to be called."] = "Er was geen bijkomende update functie %s die moest opgeroepen worden.";
+$a->strings["No failed updates."] = "Geen mislukte wijzigingen";
+$a->strings["Check database structure"] = "Controleer de database structuur";
+$a->strings["Failed Updates"] = "Mislukte wijzigingen";
+$a->strings["This does not include updates prior to 1139, which did not return a status."] = "Dit is zonder de wijzigingen voor 1139, welke geen status teruggaven.";
+$a->strings["Mark success (if update was manually applied)"] = "Markeren als succes (als aanpassing manueel doorgevoerd werd)";
+$a->strings["Attempt to execute this update step automatically"] = "Probeer deze stap automatisch uit te voeren";
+$a->strings["Lock feature %s"] = "Fixeer feature %s ";
+$a->strings["Manage Additional Features"] = "Beheer Bijkomende Features";
+$a->strings["Other"] = "Anders";
+$a->strings["unknown"] = "onbekend";
+$a->strings["This page offers you some numbers to the known part of the federated social network your Friendica node is part of. These numbers are not complete but only reflect the part of the network your node is aware of."] = "Deze pagina toont je statistieken van het gekende deel van het gefedereerde sociale netwerk waarvan je Friendica node deel uitmaakt. Deze statistieken zijn niet volledig maar reflecteren het deel van het network dat jouw node kent.";
+$a->strings["Federation Statistics"] = "Federatie Statistieken";
+$a->strings["Currently this node is aware of %d nodes with %d registered users from the following platforms:"] = "Op dit moment kent deze node %d nodes met %d geregistreerde gebruikers op basis van de volgende patformen:";
+$a->strings["Can not parse base url. Must have at least <scheme>://<domain>"] = "Kan de basis url niet verwerken. Moet minstens zijn <scheme>://<domain>";
+$a->strings["No special theme for mobile devices"] = "Geen speciaal thema voor mobiele apparaten";
+$a->strings["%s - (Experimental)"] = "%s - (Experimenteel)";
+$a->strings["No community page for local users"] = "Geen groepspagina voor lokale gebruikers";
+$a->strings["No community page"] = "Geen groepspagina";
+$a->strings["Public postings from users of this site"] = "Publieke berichten van gebruikers van deze site";
+$a->strings["Public postings from the federated network"] = "Publieke berichten van het gefedereerde netwerk";
+$a->strings["Public postings from local users and the federated network"] = "Publieke berichten van lokale gebruikers en van het gefedereerde netwerk";
+$a->strings["Multi user instance"] = "Server voor meerdere gebruikers";
+$a->strings["Closed"] = "Gesloten";
+$a->strings["Requires approval"] = "Toestemming vereist";
+$a->strings["Open"] = "Open";
+$a->strings["No SSL policy, links will track page SSL state"] = "Geen SSL beleid, links zullen SSL status van pagina volgen";
+$a->strings["Force all links to use SSL"] = "Verplicht alle links om SSL te gebruiken";
+$a->strings["Self-signed certificate, use SSL for local links only (discouraged)"] = "Zelf-ondertekend certificaat, gebruik SSL alleen voor lokale links (afgeraden)";
+$a->strings["Don't check"] = "Geen rekening mee houden";
+$a->strings["check the stable version"] = "Neem de stabiele versie in rekening";
+$a->strings["check the development version"] = "Neem de ontwikkel versie in rekening";
+$a->strings["none"] = "geen";
+$a->strings["Site"] = "Website";
+$a->strings["Republish users to directory"] = "Opnieuw de gebruikers naar de gids publiceren";
+$a->strings["Registration"] = "Registratie";
+$a->strings["File upload"] = "Uploaden bestand";
+$a->strings["Policies"] = "Beleid";
+$a->strings["Auto Discovered Contact Directory"] = "Automatisch Achterhaalde Contact Gids";
+$a->strings["Performance"] = "Performantie";
+$a->strings["Worker"] = "Worker";
+$a->strings["Message Relay"] = "Boodschap Relais";
+$a->strings["Relocate Instance"] = "Verhuis node";
+$a->strings["Site name"] = "Site naam";
+$a->strings["Sender Email"] = "Verzender Email";
+$a->strings["The email address your server shall use to send notification emails from."] = "Het email adres als afzender van notificatie emails.";
+$a->strings["Banner/Logo"] = "Banner/Logo";
+$a->strings["Shortcut icon"] = "Snelkoppeling icoon";
+$a->strings["Link to an icon that will be used for browsers."] = "Link naar een icoon dat zal gebruikt worden voor browsers.";
+$a->strings["Touch icon"] = "Pictogram voor smartphones";
+$a->strings["Link to an icon that will be used for tablets and mobiles."] = "Link naar een icoon dat zal gebruikt worden voor tablets en mobiele telefoons.";
+$a->strings["Additional Info"] = "Bijkomende Info";
+$a->strings["For public servers: you can add additional information here that will be listed at %s/servers."] = "Voor publieke servers: je kan bijkomende informatie hier toevoegen die zal opgelijst zijn op %s/servers.";
+$a->strings["System language"] = "Systeemtaal";
+$a->strings["System theme"] = "Systeem thema";
+$a->strings["Mobile system theme"] = "Mobiel systeem thema";
+$a->strings["Theme for mobile devices"] = "Thema voor mobiele apparaten";
+$a->strings["SSL link policy"] = "Beleid SSL-links";
+$a->strings["Determines whether generated links should be forced to use SSL"] = "Bepaald of gegenereerde verwijzingen verplicht SSL moeten gebruiken";
+$a->strings["Force SSL"] = "Dwing SSL af";
+$a->strings["Force all Non-SSL requests to SSL - Attention: on some systems it could lead to endless loops."] = "Forceer alle Niet-SSL aanvragen naar SSL - Pas op: dit kan op sommige systeem resulteren in oneindige lussen.";
+$a->strings["Hide help entry from navigation menu"] = "Verberg de 'help' uit het navigatiemenu";
+$a->strings["Hides the menu entry for the Help pages from the navigation menu. You can still access it calling /help directly."] = "Verbergt het menu-item voor de Help pagina's uit het navigatiemenu. Je kunt ze nog altijd vinden door /help direct in te geven.";
+$a->strings["Single user instance"] = "Server voor één gebruiker";
+$a->strings["Make this instance multi-user or single-user for the named user"] = "Stel deze server in voor meerdere gebruikers, of enkel voor de geselecteerde gebruiker.";
+$a->strings["Maximum image size"] = "Maximum afbeeldingsgrootte";
+$a->strings["Maximum size in bytes of uploaded images. Default is 0, which means no limits."] = "Maximum afmeting in bytes van afbeeldingen. Standaard is 0, dus geen beperking.";
+$a->strings["Maximum image length"] = "Maximum afbeeldingslengte";
+$a->strings["Maximum length in pixels of the longest side of uploaded images. Default is -1, which means no limits."] = "Maximum lengte in pixels van de langste kant van afbeeldingen. Standaard is -1, dus geen beperkingen.";
+$a->strings["JPEG image quality"] = "JPEG afbeeldingskwaliteit";
+$a->strings["Uploaded JPEGS will be saved at this quality setting [0-100]. Default is 100, which is full quality."] = "JPEGS zullen met deze kwaliteitsinstelling bewaard worden [0-100]. Standaard is 100, dit is volledige kwaliteit.";
+$a->strings["Register policy"] = "Registratiebeleid";
+$a->strings["Maximum Daily Registrations"] = "Maximum aantal registraties per dag";
+$a->strings["If registration is permitted above, this sets the maximum number of new user registrations to accept per day. If register is set to closed, this setting has no effect."] = "Als registratie hierboven is toegelaten, zet dit het maximum aantal registraties van nieuwe gebruikers per dag. Als registratie niet is toegelaten heeft deze instelling geen effect.";
+$a->strings["Register text"] = "Registratietekst";
+$a->strings["Will be displayed prominently on the registration page. You can use BBCode here."] = "Zal prominent op de registratie pagina getoond worden. Je kan hierin BBCode gebruiken.";
+$a->strings["Forbidden Nicknames"] = "Verboden bijnamen";
+$a->strings["Comma separated list of nicknames that are forbidden from registration. Preset is a list of role names according RFC 2142."] = "Kommagescheiden lijst van bijnamen die verboden zijn voor registratie. De lijst uit RFC2142 is op voorhand ingesteld.";
+$a->strings["Accounts abandoned after x days"] = "Verlaten accounts na x dagen";
+$a->strings["Will not waste system resources polling external sites for abandonded accounts. Enter 0 for no time limit."] = "Dit zal geen systeembronnen verspillen aan het nakijken van externe sites voor verlaten accounts. Geef 0 is voor geen tijdslimiet.";
+$a->strings["Allowed friend domains"] = "Toegelaten vriend domeinen";
+$a->strings["Comma separated list of domains which are allowed to establish friendships with this site. Wildcards are accepted. Empty to allow any domains"] = "Komma-gescheiden lijst van domeinen die een vriendschapsband met deze website mogen aangaan. Jokers zijn toegelaten. Laat leeg om alle domeinen toe te laten.";
+$a->strings["Allowed email domains"] = "Toegelaten e-mail domeinen";
+$a->strings["Comma separated list of domains which are allowed in email addresses for registrations to this site. Wildcards are accepted. Empty to allow any domains"] = "Door komma's gescheiden lijst met e-maildomeinen die op deze website mogen registeren. Wildcards zijn toegestaan.\nLeeg laten om alle domeinen toe te staan.";
+$a->strings["No OEmbed rich content"] = "Geen OEmbed richt content";
+$a->strings["Don't show the rich content (e.g. embedded PDF), except from the domains listed below."] = "Toon geen rich content (bvb. embedded PDF), behalve van domeinen hieronder opgelijst.";
+$a->strings["Allowed OEmbed domains"] = "Sta OEmbed domeinen toe";
+$a->strings["Comma separated list of domains which oembed content is allowed to be displayed. Wildcards are accepted."] = "Met komma's gescheiden lijst van domeinen waarvoor oembed content mag getoond worden. Wildcards zijn toegelaten.";
+$a->strings["Block public"] = "Openbare toegang blokkeren";
+$a->strings["Check to block public access to all otherwise public personal pages on this site unless you are currently logged in."] = "Kruis dit aan om alle openbare persoonlijke pagina's alleen toegankelijk te maken voor ingelogde gebruikers.";
+$a->strings["Force publish"] = "Dwing publiceren af";
+$a->strings["Check to force all profiles on this site to be listed in the site directory."] = "Kruis dit aan om af te dwingen dat alle profielen op deze website in de gids van deze website gepubliceerd worden.";
+$a->strings["Enabling this may violate privacy laws like the GDPR"] = "Dit activeren zou privacy wetten zoals GDPR (AVG) kunnen overtreden";
+$a->strings["Global directory URL"] = "Algemene gids URL";
+$a->strings["URL to the global directory. If this is not set, the global directory is completely unavailable to the application."] = "URL naar de globale gids. Als dit niet geconfigureerd is, dan zal de globale gids volledig onbeschikbaar zijn voor de applicatie.";
+$a->strings["Private posts by default for new users"] = "Privéberichten als standaard voor nieuwe gebruikers";
+$a->strings["Set default post permissions for all new members to the default privacy group rather than public."] = "Stel de standaardrechten van berichten voor nieuwe leden op de standaard privacygroep in, in plaats van openbaar.";
+$a->strings["Don't include post content in email notifications"] = "De inhoud van het bericht niet insluiten bij e-mailnotificaties";
+$a->strings["Don't include the content of a post/comment/private message/etc. in the email notifications that are sent out from this site, as a privacy measure."] = "De inhoud van berichten/commentaar/privéberichten/enzovoort niet insluiten in e-mailnotificaties die door deze website verzonden worden, voor de bescherming van je privacy.";
+$a->strings["Disallow public access to addons listed in the apps menu."] = "Publieke toegang ontzeggen tot addons die opgelijst zijn in het applicatie menu.";
+$a->strings["Checking this box will restrict addons listed in the apps menu to members only."] = "Dit vakje aanvinken zal de lijst van addons in het applicatie menu beperken tot alleen leden.";
+$a->strings["Don't embed private images in posts"] = "Privé beelden in berichten niet inwerken";
+$a->strings["Don't replace locally-hosted private photos in posts with an embedded copy of the image. This means that contacts who receive posts containing private photos will have to authenticate and load each image, which may take a while."] = "Vervang lokaal gehoste privé foto's in berichten niet door een ingewerkte kopie van het beeld. Dit betekent dat contacten die berichten krijgen met privé foto's zullen moeten authentificeren en elk beeld apart laden, wat een tijdje kan duren.";
+$a->strings["Explicit Content"] = "Expliciete inhoud";
+$a->strings["Set this to announce that your node is used mostly for explicit content that might not be suited for minors. This information will be published in the node information and might be used, e.g. by the global directory, to filter your node from listings of nodes to join. Additionally a note about this will be shown at the user registration page."] = "Vink dit aan om aan te duiden dat deze node veel expliciet materiaal verspreid en niet bedoeld is voor minderjarigen. Deze info zal gepubliceert worden bij de node-info en kan vb. gebruikt worden voor een filter in de globale lijst. Dit word ook getoont naar de gebruiker op de registratie pagina.";
+$a->strings["Allow Users to set remote_self"] = "Sta Gebruikers toe om remote_self te configureren";
+$a->strings["With checking this, every user is allowed to mark every contact as a remote_self in the repair contact dialog. Setting this flag on a contact causes mirroring every posting of that contact in the users stream."] = "Als je dit aanvinkt, dan mag elke gebruiker elke contact als remote_self aanduiden in de 'herstel contact' dialoog. Deze vlag aanzetten voor een contact zorgt ervoor dat elke bericht van dit contact gespiegeld wordt in de gebruiker zijn of haar stroom. ";
+$a->strings["Block multiple registrations"] = "Blokkeer meerdere registraties";
+$a->strings["Disallow users to register additional accounts for use as pages."] = "Laat niet toe dat gebruikers meerdere accounts aanmaken.";
+$a->strings["Disable OpenID"] = "Schakel OpenID uit";
+$a->strings["Disable OpenID support for registration and logins."] = "Schakel OpenID-ondersteuning uit voor registratie en logins.";
+$a->strings["No Fullname check"] = "Geen Volledige-Naamscontrole";
+$a->strings["Community pages for visitors"] = "Groepspagina voor bezoekers";
+$a->strings["Which community pages should be available for visitors. Local users always see both pages."] = "Welke groepspagina's moeten beschikbaar zijn voor bezoekers. Lokale gebruikers zien altijd beide pagina's.";
+$a->strings["Posts per user on community page"] = "Berichten per gebruiker op de groepspagina";
+$a->strings["OStatus support can only be enabled if threading is enabled."] = "OStatus ondersteuning kan alleen geactiveerd worden als de gespreksstroom geactiveerd is.";
+$a->strings["Diaspora support can't be enabled because Friendica was installed into a sub directory."] = "Diaspora ondersteuning is niet mogelijk omdat Friendica in een sub folder geïnstalleerd is.";
+$a->strings["Enable Diaspora support"] = "Diaspora ondersteuning activeren";
+$a->strings["Provide built-in Diaspora network compatibility."] = "Bied ingebouwde ondersteuning voor het Diaspora netwerk.";
+$a->strings["Only allow Friendica contacts"] = "Laat alleen Friendica contacten toe";
+$a->strings["All contacts must use Friendica protocols. All other built-in communication protocols disabled."] = "Alle contacten moeten een Friendica protocol gebruiken. Alle andere ingebouwde communicatieprotocols worden uitgeschakeld.";
+$a->strings["Verify SSL"] = "Controleer SSL";
+$a->strings["If you wish, you can turn on strict certificate checking. This will mean you cannot connect (at all) to self-signed SSL sites."] = "Als je wilt kun je striktere certificaat controle activeren. Dit betekent dat je (totaal) niet kunt connecteren met sites die zelf-ondertekende SSL certificaten gebruiken.";
+$a->strings["Proxy user"] = "Proxy-gebruiker";
+$a->strings["Proxy URL"] = "Proxy-URL";
+$a->strings["Network timeout"] = "Netwerk timeout";
+$a->strings["Value is in seconds. Set to 0 for unlimited (not recommended)."] = "Waarde is in seconden. Zet op 0 voor onbeperkt (niet aanbevolen).";
+$a->strings["Maximum Load Average"] = "Maximum gemiddelde belasting";
+$a->strings["Maximum Load Average (Frontend)"] = "Maximum Gemiddelde Belasting (Frontend)";
+$a->strings["Maximum system load before the frontend quits service - default 50."] = "Maximum systeem belasting wanneer de frontend ermee ophoudt - standaard waarde 50.";
+$a->strings["Minimal Memory"] = "Minimaal Geheugen";
+$a->strings["Minimal free memory in MB for the worker. Needs access to /proc/meminfo - default 0 (deactivated)."] = "Minimum vrij geheugen in MB voor de worker. Toegang nodig tot /proc/meminfo - standaard waarde 0 (gedeactiveerd).";
+$a->strings["Days between requery"] = "Dagen tussen herbevraging";
+$a->strings["Number of days after which a server is requeried for his contacts."] = "Aantal dagen waarna de server opnieuw bevraagd wordt naar zijn contacten.";
+$a->strings["Discover contacts from other servers"] = "Ontdek contacten van andere servers";
+$a->strings["Search the local directory"] = "Doorzoek de lokale gids";
+$a->strings["Search the local directory instead of the global directory. When searching locally, every search will be executed on the global directory in the background. This improves the search results when the search is repeated."] = "Doorzoek de lokale gids in plaats van de globale gids. Bij lokale doorzoeking wordt elke opzoeking in de globale gids op de achtergrond uitgevoerd. Dit verbetert de zoekresultaten wanneer de zoekopdracht herhaald wordt.";
+$a->strings["Publish server information"] = "Publiceer server informatie";
+$a->strings["Check upstream version"] = "Controleer upstream versie";
+$a->strings["Enables checking for new Friendica versions at github. If there is a new version, you will be informed in the admin panel overview."] = "Activeer het controleren op nieuwe versies van Friendica bij github. Als er een nieuwe versie is, dan word je geïnformeerd in the administratie paneel.";
+$a->strings["Suppress Tags"] = "Onderdruk Tags";
+$a->strings["Suppress showing a list of hashtags at the end of the posting."] = "Onderdruk het tonen van een lijst van hastags op het einde van het bericht.";
+$a->strings["Clean database"] = "Database opruimen";
+$a->strings["Remove old remote items, orphaned database records and old content from some other helper tables."] = "Verwijder oude remote items, database weesrecords en oude content van andere helper tabellen.";
+$a->strings["Lifespan of remote items"] = "Levensduur van remote items";
+$a->strings["When the database cleanup is enabled, this defines the days after which remote items will be deleted. Own items, and marked or filed items are always kept. 0 disables this behaviour."] = "Als de database opruiming is geactiveerd, dan definieert dit na hoeveel dagen remote items verwijderd zullen worden. Eigen items, en gemarkeerde of opgeslagen items worden altijd behouden. 0 deactiveert dit gedrag.";
+$a->strings["Lifespan of unclaimed items"] = "Levensduur van niet geclaimde items";
+$a->strings["When the database cleanup is enabled, this defines the days after which unclaimed remote items (mostly content from the relay) will be deleted. Default value is 90 days. Defaults to the general lifespan value of remote items if set to 0."] = "Als de database opruiming geactiveerd is, dan definieert dit na hoeveel dagen ongeclaimde remote items (meestal content van een relais) zal verwijderd worden. Standaard waarde is 90 dagen. Als de waarde 0 is, dan is de waarde gelijk aan de algemene levensduur van remote items.";
+$a->strings["Lifespan of raw conversation data"] = "Levenstijd van ruwe gespreksdata";
+$a->strings["The conversation data is used for ActivityPub and OStatus, as well as for debug purposes. It should be safe to remove it after 14 days, default is 90 days."] = "De gespreksdata word gebruikt voor ActivityPub, OStatus en voor debugging doeleinden. Het is veilig om dit na 14 dagen te verwijderen. Standaard staat dit op 90 dagen.";
+$a->strings["Path to item cache"] = "Pad naar cache voor items";
+$a->strings["The item caches buffers generated bbcode and external images."] = "Item caches bufferen gegenereerde bbcodes en externe beelden.";
+$a->strings["Cache duration in seconds"] = "Cache tijdsduur in seconden";
+$a->strings["How long should the cache files be hold? Default value is 86400 seconds (One day). To disable the item cache, set the value to -1."] = "Hoe lang moeten de cache bestanden bijgehouden worden? Standaard waarde is 86400 seconden (een dag). Zet de waarde op -1 om de item cache te deactiveren.";
+$a->strings["Maximum numbers of comments per post"] = "Maximum aantal reacties per bericht";
+$a->strings["How much comments should be shown for each post? Default value is 100."] = "Hoeveel reacties moeten getoond worden per bericht? Standaard waarde is 100.";
+$a->strings["Temp path"] = "Tijdelijk pad";
+$a->strings["If you have a restricted system where the webserver can't access the system temp path, enter another path here."] = "Als je een systeem met restricties hebt waarbij de webserver geen toegang heeft tot het systeem pad, geef hier dan een ander pad in. ";
+$a->strings["Disable picture proxy"] = "Schakel beeld proxy uit";
+$a->strings["The picture proxy increases performance and privacy. It shouldn't be used on systems with very low bandwidth."] = "De beeld proxy verhoogt de performantie en privacy. Gebruik dit niet op systemen met erg lage bandbreedte.";
+$a->strings["Only search in tags"] = "Zoek alleen in tags";
+$a->strings["On large systems the text search can slow down the system extremely."] = "Het opzoeken van tekst kan grote systemen extreem vertragen.";
+$a->strings["New base url"] = "Nieuwe basis url";
+$a->strings["Change base url for this server. Sends relocate message to all Friendica and Diaspora* contacts of all users."] = "Verander de basis url voor deze server. Stuurt een verhuis boodschap naar all Friendica en Diaspora* contacten.";
+$a->strings["RINO Encryption"] = "RINO encryptie";
+$a->strings["Encryption layer between nodes."] = "Encryptie laag tussen nodes.";
+$a->strings["Disabled"] = "Uitgeschakeld";
+$a->strings["Enabled"] = "Geactiveerd";
+$a->strings["Maximum number of parallel workers"] = "Maximum aantal parallelle workers";
+$a->strings["On shared hosters set this to %d. On larger systems, values of %d are great. Default value is %d."] = "Op gedeelde hosts zet dit op %d. Op grotere systemen, waarden als %d zijn goed. standaard waarde is %d";
+$a->strings["Enable fastlane"] = "Activeer fastlane";
+$a->strings["When enabed, the fastlane mechanism starts an additional worker if processes with higher priority are blocked by processes of lower priority."] = "Als deze parameter geactiveerd is, dan start het fastlane mechanisme een bijkomende worker als processen met hogere prioriteit geblokkeerd worden door processen met een lagere prioriteit.";
+$a->strings["Enable frontend worker"] = "Activeer frontend worker";
+$a->strings["Subscribe to relay"] = "Schrijf in op relais";
+$a->strings["Enables the receiving of public posts from the relay. They will be included in the search, subscribed tags and on the global community page."] = "Activeert het ontvangen van publieke berichten vanwege de relais. Ze zullen inbegrepen zijn in de zoekresultaten, tags waarop je ingeschreven bent en op de globale groepspagina.";
+$a->strings["Relay server"] = "Relais server";
+$a->strings["Address of the relay server where public posts should be send to. For example https://relay.diasp.org"] = "Adres van de relais server waar publieke berichten naartoe moeten gezonden worden. Bijvoorbeeld https://relay.diasp.org";
+$a->strings["Direct relay transfer"] = "Directe relais transfer";
+$a->strings["Enables the direct transfer to other servers without using the relay servers"] = "Activeert directe relais transfer naar andere servers zonder gebruik van relais servers";
+$a->strings["Relay scope"] = "Scope van de relais";
+$a->strings["all"] = "alle";
+$a->strings["tags"] = "tags";
+$a->strings["Server tags"] = "Server tags";
+$a->strings["Allow user tags"] = "Sta gebruiker tags toe.";
+$a->strings["Start Relocation"] = "Start verhuis";
+$a->strings["Your DB still runs with MyISAM tables. You should change the engine type to InnoDB. As Friendica will use InnoDB only features in the future, you should change this! See <a href=\"%s\">here</a> for a guide that may be helpful converting the table engines. You may also use the command <tt>php bin/console.php dbstructure toinnodb</tt> of your Friendica installation for an automatic conversion.<br />"] = "Je DB opereert nog met MyISAM tabellen. Best is van engine te veranderen naar InnoDB. Aangezien Friendica in de toekomst gebruik zal maken van InnoDB features, zou je dit best aanpassen! Zie <a href=\"%s\">hier</a> voor een gids die je kan helpen om de tabel engines te converteren. Je kan ook het commando<tt>php bin/console.php dbstructure toinnodb</tt> van je Friendica installatie gebruiken voor een automatische conversie.<br />";
+$a->strings["There is a new version of Friendica available for download. Your current version is %1\$s, upstream version is %2\$s"] = "Er is een nieuwe versie van Friendica beschikbaar om te downloaden. Je huidige versie is %1\$s, upstream versie is %2\$s";
+$a->strings["The database update failed. Please run \"php bin/console.php dbstructure update\" from the command line and have a look at the errors that might appear."] = "Database update is mislukt. Gelieve \"php bin/console.php dbstructure update\" vanaf de command line uit te voeren en de foutmeldingen die zouden kunnen verschijnen na te kijken.";
+$a->strings["The worker was never executed. Please check your database structure!"] = "De worker werd nooit uitgevoerd. Best je database structuur eens nakijken!";
+$a->strings["The last worker execution was on %s UTC. This is older than one hour. Please check your crontab settings."] = "De laatste worker uitvoering was op %s UTC. Dit is langer dan 1 uur geleden. Best je crontab instellingen nakijken.";
+$a->strings["Friendica's configuration now is stored in config/local.config.php, please copy config/local-sample.config.php and move your config from <code>.htconfig.php</code>. See <a href=\"%s\">the Config help page</a> for help with the transition."] = "Het configuratiebestand bevind zich nu in config/local.config.php. Kopieer het bestand config/local-sample.config.php en verplaats je configuratie uit <code>.htconfig.php</code>. Ga naar de<a href=\"%s\">configuratie help pagina</a> voor hulp bij transitie.";
+$a->strings["<a href=\"%s\">%s</a> is not reachable on your system. This is a severe configuration issue that prevents server to server communication. See <a href=\"%s\">the installation page</a> for help."] = "<a href=\"%s\">%s</a> is niet bereikbaar. Dit is een belangrijk communicatieprobleem waardoor server-naar-server communicatie niet mogelijk is. Lees de <a href=\"%s\">the installatie pagina</a> voor hulp.";
+$a->strings["Normal Account"] = "Normaal account";
+$a->strings["Automatic Follower Account"] = "Automatische Volger Account";
+$a->strings["Public Forum Account"] = "Publiek Forum account";
+$a->strings["Automatic Friend Account"] = "Automatisch Vriendschapsaccount";
+$a->strings["Blog Account"] = "Blog Account";
+$a->strings["Private Forum Account"] = "Privé Forum Account";
+$a->strings["Message queues"] = "Bericht-wachtrijen";
+$a->strings["Server Settings"] = "Server instellingen.";
+$a->strings["Summary"] = "Samenvatting";
+$a->strings["Registered users"] = "Geregistreerde gebruikers";
+$a->strings["Pending registrations"] = "Registraties die in de wacht staan";
+$a->strings["Version"] = "Versie";
+$a->strings["Active addons"] = "Actieve addons";
+$a->strings["Display Terms of Service"] = "Toon Gebruiksvoorwaarden";
+$a->strings["Enable the Terms of Service page. If this is enabled a link to the terms will be added to the registration form and the general information page."] = "Activeer de Gebruiksvoorwaarden pagina. Als deze geactiveerd is, dan zal er een link naar de voorwaarden toegevoegd worden aan het registratie formulier en de algemene informatie pagina.";
+$a->strings["Display Privacy Statement"] = "Toon Privacy Verklaring";
+$a->strings["Privacy Statement Preview"] = "Privacy Verklaring Voorbeeldweergave";
+$a->strings["The Terms of Service"] = "De Gebruiksvoorwaarden";
+$a->strings["Enter the Terms of Service for your node here. You can use BBCode. Headers of sections should be [h2] and below."] = "Geef hier de Gebruiksvoorwaarden van je node op. Je kan BBCode gebruiken. Sectie headers moeten [h2] zijn of lager.";
+$a->strings["%s user blocked"] = [
+];
+$a->strings["%s user unblocked"] = [
+];
+$a->strings["You can't remove yourself"] = "Je kan jezelf niet verwijderen";
+$a->strings["%s user deleted"] = [
+ 0 => "%s gebruiker verwijderd",
+ 1 => "%s gebruikers verwijderd",
+];
+$a->strings["%s user approved"] = [
+];
+$a->strings["%s registration revoked"] = [
+];
+$a->strings["Account approved."] = "Account goedgekeurd.";
+$a->strings["Private Forum"] = "Privé Forum";
+$a->strings["Register date"] = "Registratiedatum";
+$a->strings["Last login"] = "Laatste login";
+$a->strings["Type"] = "Type";
+$a->strings["Users"] = "Gebruiker";
+$a->strings["Add User"] = "Gebruiker toevoegen";
+$a->strings["User registrations waiting for confirm"] = "Gebruikersregistraties wachten op een bevestiging";
+$a->strings["User waiting for permanent deletion"] = "Gebruiker wacht op permanente verwijdering";
+$a->strings["Request date"] = "Registratiedatum";
+$a->strings["No registrations."] = "Geen registraties.";
+$a->strings["Note from the user"] = "Nota van de gebruiker";
+$a->strings["Deny"] = "Weiger";
+$a->strings["User blocked"] = "Gebruiker geblokeerd";
+$a->strings["Site admin"] = "Sitebeheerder";
+$a->strings["Account expired"] = "Account verlopen";
+$a->strings["New User"] = "Nieuwe gebruiker";
+$a->strings["Selected users will be deleted!\\n\\nEverything these users had posted on this site will be permanently deleted!\\n\\nAre you sure?"] = "Geselecteerde gebruikers zullen verwijderd worden!\\n\\nAlles wat deze gebruikers gepost hebben op deze website zal permanent verwijderd worden!\\n\\nBen je zeker?";
+$a->strings["The user {0} will be deleted!\\n\\nEverything this user has posted on this site will be permanently deleted!\\n\\nAre you sure?"] = "De gebruiker {0} zal verwijderd worden!\\n\\nAlles wat deze gebruiker gepost heeft op deze website zal permanent verwijderd worden!\\n\\nBen je zeker?";
+$a->strings["Name of the new user."] = "Naam van nieuwe gebruiker";
+$a->strings["Nickname"] = "Bijnaam";
+$a->strings["Nickname of the new user."] = "Bijnaam van nieuwe gebruiker";
+$a->strings["Email address of the new user."] = "E-mailadres van nieuwe gebruiker";
+$a->strings["Time Conversion"] = "Tijdsconversie";
+$a->strings["Friendica provides this service for sharing events with other networks and friends in unknown timezones."] = "Friendica biedt deze dienst aan om gebeurtenissen te delen met andere netwerken en vrienden in onbekende tijdzones.";
+$a->strings["UTC time: %s"] = "UTC tijd: %s";
+$a->strings["Current timezone: %s"] = "Huidige Tijdzone: %s";
+$a->strings["Converted localtime: %s"] = "Omgerekende lokale tijd: %s";
+$a->strings["Please select your timezone:"] = "Selecteer je tijdzone:";
+$a->strings["Only logged in users are permitted to perform a probing."] = "Alleen ingelogde gebruikers hebben toelating om aan probing te doen.";
+$a->strings["Source input"] = "Bron input";
+$a->strings["BBCode::toPlaintext"] = "BBCode::toPlaintext";
+$a->strings["BBCode::convert (raw HTML)"] = "BBCode::convert (raw HTML)";
+$a->strings["BBCode::convert"] = "BBCode::convert";
+$a->strings["BBCode::convert => HTML::toBBCode"] = "BBCode::convert => HTML::toBBCode";
+$a->strings["BBCode::toMarkdown"] = "BBCode::toMarkdown";
+$a->strings["BBCode::toMarkdown => Markdown::convert"] = "BBCode::toMarkdown => Markdown::convert";
+$a->strings["BBCode::toMarkdown => Markdown::toBBCode"] = "BBCode::toMarkdown => Markdown::toBBCode";
+$a->strings["BBCode::toMarkdown => Markdown::convert => HTML::toBBCode"] = "BBCode::toMarkdown => Markdown::convert => HTML::toBBCode";
+$a->strings["Source input (Diaspora format)"] = "Bron ingave (Diaspora formaat):";
+$a->strings["Markdown::convert (raw HTML)"] = "Markdown::convert (Ruwe HTML)";
+$a->strings["Markdown::convert"] = "Markdown::convert";
+$a->strings["Markdown::toBBCode"] = "Markdown::toBBCode";
+$a->strings["Raw HTML input"] = "Onverwerkte HTML input";
+$a->strings["HTML Input"] = "HTML Input";
+$a->strings["HTML::toBBCode"] = "HTML::toBBCode";
+$a->strings["HTML::toBBCode => BBCode::convert"] = "HTML::toBBCode => BBCode::convert";
+$a->strings["HTML::toBBCode => BBCode::convert (raw HTML)"] = "HTML::toBBCode => BBCode::convert (Ruwe HTML)";
+$a->strings["HTML::toMarkdown"] = "HTML::toMarkdown";
+$a->strings["HTML::toPlaintext"] = "HTML::toPlaintext";
+$a->strings["Source text"] = "Brontekst";
+$a->strings["BBCode"] = "BBCode";
+$a->strings["Markdown"] = "Markdown";
+$a->strings["HTML"] = "HTML";
+$a->strings["You must be logged in to use this module"] = "Je moet ingelogd zijn om deze module te gebruiken";
+$a->strings["Source URL"] = "Bron URL";
+$a->strings["Lookup address"] = "Opzoekadres";
+$a->strings["- select -"] = "- Kies -";
+$a->strings["Please enter a post body."] = "Voer een berichttekst in.";
+$a->strings["This feature is only available with the frio theme."] = "Deze functie is alleen beschikbaar met het frio-thema.";
+$a->strings["Compose new personal note"] = "Stel een nieuwe persoonlijke notitie op";
+$a->strings["Compose new post"] = "Nieuw bericht opstellen";
+$a->strings["Visibility"] = "Zichtbaarheid";
+$a->strings["Clear the location"] = "Wis de locatie";
+$a->strings["Location services are unavailable on your device"] = "Locatiediensten zijn niet beschikbaar op uw apparaat";
+$a->strings["Location services are disabled. Please check the website's permissions on your device"] = "Locatiediensten zijn uitgeschakeld. Controleer de toestemmingen van de website op uw apparaat";
+$a->strings["Common contact (%s)"] = [
+];
+$a->strings["Follower (%s)"] = [
+ 0 => "Volger (%s)",
+ 1 => "Volgers (%s)",
+];
+$a->strings["Following (%s)"] = [
+ 0 => "Volgend (%s)",
+ 1 => "Volgend (%s)",
+];
+$a->strings["Mutual friend (%s)"] = [
+ 0 => "Gemeenschappelijke vriend (%s)",
+ 1 => "Gemeenschappelijke vrienden (%s)",
+];
+$a->strings["Contact (%s)"] = [
+ 0 => "Contact (%s)",
+ 1 => "Contacten (%s)",
+];
+$a->strings["No contacts."] = "Geen contacten.";
+$a->strings["Member since:"] = "Lid sinds:";
+$a->strings["j F, Y"] = "F j Y";
+$a->strings["j F"] = "F j";
+$a->strings["Forums:"] = "Fora:";
+$a->strings["View profile as:"] = "Bekijk profiel als:";
+$a->strings["You must be logged in to use this module."] = "Je moet ingelogd zijn om deze module te gebruiken.";
+$a->strings["Only logged in users are permitted to perform a search."] = "Alleen ingelogde gebruikers mogen een zoekopdracht starten.";
+$a->strings["Only one search per minute is permitted for not logged in users."] = "Niet ingelogde gebruikers mogen slechts 1 opzoeking doen per minuut";
+$a->strings["No results."] = "Geen resultaten.";
+$a->strings["Items tagged with: %s"] = "Items getagd met: %s";
+$a->strings["Results for: %s"] = "Resultaten voor: %s";
+$a->strings["Search term already saved."] = "Zoekterm is al opgeslagen.";
+$a->strings["Please enter your password to access this page."] = "Voer uw wachtwoord in om deze pagina te openen.";
+$a->strings["App-specific password generation failed: The description is empty."] = "App-specifiek wachtwoord genereren mislukt: de beschrijving is leeg.";
+$a->strings["App-specific password generation failed: This description already exists."] = "App-specifieke wachtwoordgeneratie mislukt: deze beschrijving bestaat al.";
+$a->strings["New app-specific password generated."] = "Nieuw app-specifiek wachtwoord gegenereerd.";
+$a->strings["App-specific passwords successfully revoked."] = "App-specifieke wachtwoorden succesvol ingetrokken.";
+$a->strings["App-specific password successfully revoked."] = "App-specifiek wachtwoord succesvol ingetrokken.";
+$a->strings["Two-factor app-specific passwords"] = "Twee-factor app-specifieke wachtwoorden";
+$a->strings["<p>App-specific passwords are randomly generated passwords used instead your regular password to authenticate your account on third-party applications that don't support two-factor authentication.</p>"] = "<p>App-specifieke wachtwoorden zijn willekeurig gegenereerde wachtwoorden die in plaats daarvan uw normale wachtwoord worden gebruikt om uw account te verifiëren bij applicaties van derden die geen tweefactorauthenticatie ondersteunen.</p>";
+$a->strings["Make sure to copy your new app-specific password now. You won’t be able to see it again!"] = "Zorg ervoor dat u nu uw nieuwe app-specifieke wachtwoord kopieert. U zult het niet meer kunnen zien!";
+$a->strings["Description"] = "Omschrijving";
+$a->strings["Last Used"] = "Laatst gebruikt";
+$a->strings["Revoke"] = "Intrekken";
+$a->strings["Revoke All"] = "Alles intrekken";
+$a->strings["When you generate a new app-specific password, you must use it right away, it will be shown to you once after you generate it."] = "Wanneer u een nieuw app-specifiek wachtwoord genereert, moet u dit meteen gebruiken, het wordt u een keer getoond nadat u het hebt gegenereerd.";
+$a->strings["Generate new app-specific password"] = "Genereer een nieuw app-specifiek wachtwoord";
+$a->strings["Generate"] = "Genereer";
+$a->strings["Two-factor authentication successfully disabled."] = "Twee-factor-authenticatie succesvol uitgeschakeld.";
+$a->strings["Wrong Password"] = "Verkeerd wachtwoord";
+$a->strings["Two-factor authentication"] = "2-factor authenticatie";
+$a->strings["<p>Use an application on a mobile device to get two-factor authentication codes when prompted on login.</p>"] = "<p>Gebruik een applicatie op een mobiel apparaat om tweefactorauthenticatiecodes te krijgen wanneer daarom wordt gevraagd bij het inloggen.</p>";
+$a->strings["Authenticator app"] = "Authenticatie-app";
+$a->strings["Configured"] = "Geconfigureerd";
+$a->strings["Not Configured"] = "Niet geconfigureerd";
+$a->strings["<p>You haven't finished configuring your authenticator app.</p>"] = "<p>U bent nog niet klaar met het configureren van uw authenticator-app.</p>";
+$a->strings["<p>Your authenticator app is correctly configured.</p>"] = "<p>Uw authenticator-app is correct geconfigureerd.</p>";
+$a->strings["Recovery codes"] = "Herstelcodes";
+$a->strings["Remaining valid codes"] = "Resterende geldige codes";
+$a->strings["<p>These one-use codes can replace an authenticator app code in case you have lost access to it.</p>"] = "<p>Deze codes voor eenmalig gebruik kunnen een authenticator-app-code vervangen als u er geen toegang toe heeft.</p>";
+$a->strings["App-specific passwords"] = "App-specifieke wachtwoorden";
+$a->strings["Generated app-specific passwords"] = "App-specifieke wachtwoorden gegenereerd";
+$a->strings["<p>These randomly generated passwords allow you to authenticate on apps not supporting two-factor authentication.</p>"] = "<p>Met deze willekeurig gegenereerde wachtwoorden kunt u verifiëren bij apps die geen tweefactorauthenticatie ondersteunen.</p>";
+$a->strings["Actions"] = "Acties";
+$a->strings["Current password:"] = "Huidig wachtwoord:";
+$a->strings["You need to provide your current password to change two-factor authentication settings."] = "U moet uw huidige wachtwoord opgeven om de instellingen voor tweefactorauthenticatie te wijzigen.";
+$a->strings["Enable two-factor authentication"] = "Schakel tweefactorauthenticatie in";
+$a->strings["Disable two-factor authentication"] = "Schakel tweefactorauthenticatie uit";
+$a->strings["Show recovery codes"] = "Toon herstelcodes";
+$a->strings["Manage app-specific passwords"] = "Beheer app-specifieke wachtwoorden";
+$a->strings["Finish app configuration"] = "Voltooi de app-configuratie";
+$a->strings["New recovery codes successfully generated."] = "Nieuwe herstelcodes zijn succesvol gegenereerd.";
+$a->strings["Two-factor recovery codes"] = "Twee-factor herstelcodes";
+$a->strings["<p>Recovery codes can be used to access your account in the event you lose access to your device and cannot receive two-factor authentication codes.</p><p><strong>Put these in a safe spot!</strong> If you lose your device and don’t have the recovery codes you will lose access to your account.</p>"] = "<p>Herstelcodes kunnen worden gebruikt om je gebruiker te benaderen in het geval dat je geen toegang meer hebt tot je apparaat en je geen twee-factor autentificatie codes kunt ontvangen.</p><p><strong>Bewaar deze op een veilige plek!</strong> Als je je apparaat verliest en je hebt geen toegang tot de herstelcodes dan heb je geen toegang meer tot je gebruiker.</p>";
+$a->strings["When you generate new recovery codes, you must copy the new codes. Your old codes won’t work anymore."] = "Wanneer u nieuwe herstelcodes genereert, moet u de nieuwe codes kopiëren. Uw oude codes werken niet meer.";
+$a->strings["Generate new recovery codes"] = "Genereer nieuwe herstelcodes";
+$a->strings["Next: Verification"] = "Volgende: verificatie";
+$a->strings["Two-factor authentication successfully activated."] = "Twee-factor-authenticatie succesvol geactiveerd.";
+$a->strings["Invalid code, please retry."] = "Ongeldige code, probeer het opnieuw.";
+$a->strings["<p>Or you can submit the authentication settings manually:</p>\n<dl>\n\t<dt>Issuer</dt>\n\t<dd>%s</dd>\n\t<dt>Account Name</dt>\n\t<dd>%s</dd>\n\t<dt>Secret Key</dt>\n\t<dd>%s</dd>\n\t<dt>Type</dt>\n\t<dd>Time-based</dd>\n\t<dt>Number of digits</dt>\n\t<dd>6</dd>\n\t<dt>Hashing algorithm</dt>\n\t<dd>SHA-1</dd>\n</dl>"] = "<p>Of je kan de autentificatie instellingen handmatig versturen:</p>\n<dl>\n\t<dt>Uitgever</dt>\n\t<dd>%s</dd>\n\t<dt>Gebruikersnaam</dt>\n\t<dd>%s</dd>\n\t<dt>Geheime sleutel</dt>\n\t<dd>%s</dd>\n\t<dt>Type</dt>\n\t<dd>Time-based</dd>\n\t<dt>Aantal tekens</dt>\n\t<dd>6</dd>\n\t<dt>Hashing algorithm</dt>\n\t<dd>SHA-1</dd>\n</dl>";
+$a->strings["Two-factor code verification"] = "Tweeledige codeverificatie";
+$a->strings["<p>Please scan this QR Code with your authenticator app and submit the provided code.</p>"] = "<p>Scan deze QR-code met uw authenticator-app en verzend de opgegeven code.</p>";
+$a->strings["Please enter a code from your authentication app"] = "Voer een code in van uw authenticatie-app";
+$a->strings["Verify code and enable two-factor authentication"] = "Controleer de code en schakel tweefactorauthenticatie in";
+$a->strings["Image size reduction [%s] failed."] = "Verkleining van de afbeelding [%s] mislukt.";
+$a->strings["Shift-reload the page or clear browser cache if the new photo does not display immediately."] = "Shift-herlaad de pagina, of maak de browser cache leeg als nieuwe foto's niet onmiddellijk verschijnen.";
+$a->strings["Unable to process image"] = "Ik kan de afbeelding niet verwerken";
+$a->strings["Photo not found."] = "Foto niet gevonden.";
+$a->strings["Profile picture successfully updated."] = "Profielfoto geüpdatet.";
+$a->strings["Crop Image"] = "Afbeelding bijsnijden";
+$a->strings["Please adjust the image cropping for optimum viewing."] = "Pas het afsnijden van de afbeelding aan voor het beste resultaat.";
+$a->strings["Use Image As Is"] = "Gebruik afbeelding zoals deze is";
+$a->strings["Missing uploaded image."] = "Ontbrekende geüploade afbeelding.";
+$a->strings["Profile Picture Settings"] = "Profiel afbeelding instellingen";
+$a->strings["Current Profile Picture"] = "Huidige profielafbeelding";
+$a->strings["Upload Profile Picture"] = "Upload profiel afbeelding";
+$a->strings["Upload Picture:"] = "Upload afbeelding";
+$a->strings["or"] = "of";
+$a->strings["skip this step"] = "Deze stap overslaan";
+$a->strings["select a photo from your photo albums"] = "Kies een foto uit je fotoalbums";
+$a->strings["Profile Name is required."] = "Profielnaam is vereist.";
+$a->strings["Profile couldn't be updated."] = "Profiel kan niet worden bijgewerkt.";
+$a->strings["Label:"] = "Label:";
+$a->strings["Value:"] = "Waarde:";
+$a->strings["Field Permissions"] = "Veldrechten";
+$a->strings["(click to open/close)"] = "(klik om te openen/sluiten)";
+$a->strings["Add a new profile field"] = "Voeg nieuw profielveld toe";
+$a->strings["Profile Actions"] = "Profiel Acties";
+$a->strings["Edit Profile Details"] = "Profieldetails bewerken";
+$a->strings["Change Profile Photo"] = "Profielfoto wijzigen";
+$a->strings["Profile picture"] = "Profiel foto";
+$a->strings["Location"] = "Plaats";
+$a->strings["Custom Profile Fields"] = "Aangepaste profielvelden";
+$a->strings["Upload Profile Photo"] = "Profielfoto uploaden";
+$a->strings["Display name:"] = "Weergave naam:";
+$a->strings["Street Address:"] = "Postadres:";
+$a->strings["Locality/City:"] = "Gemeente/Stad:";
+$a->strings["Region/State:"] = "Regio/Staat:";
+$a->strings["Postal/Zip Code:"] = "Postcode:";
+$a->strings["Country:"] = "Land:";
+$a->strings["XMPP (Jabber) address:"] = "XMPP (Jabber) adres:";
+$a->strings["The XMPP address will be propagated to your contacts so that they can follow you."] = "Het XMPP adres zal doorgegeven worden aan je contacten zodat zij je kunnen volgen.";
+$a->strings["Homepage URL:"] = "Adres tijdlijn:";
+$a->strings["Public Keywords:"] = "Publieke Sleutelwoorden:";
+$a->strings["(Used for suggesting potential friends, can be seen by others)"] = "(Gebruikt om mogelijke vrienden voor te stellen, kan door anderen gezien worden)";
+$a->strings["Private Keywords:"] = "Privé Sleutelwoorden:";
+$a->strings["(Used for searching profiles, never shown to others)"] = "(Gebruikt om profielen te zoeken, nooit aan anderen getoond)";
+$a->strings["<p>Custom fields appear on <a href=\"%s\">your profile page</a>.</p>\n\t\t\t\t<p>You can use BBCodes in the field values.</p>\n\t\t\t\t<p>Reorder by dragging the field title.</p>\n\t\t\t\t<p>Empty the label field to remove a custom field.</p>\n\t\t\t\t<p>Non-public fields can only be seen by the selected Friendica contacts or the Friendica contacts in the selected groups.</p>"] = "<p>Aangepaste velden verschijnen op <a href=\"%s\">je profielpagina</a>.</p>\n\t\t\t\t<p>Je kunt BBCodes in de veldwaarden gebruiken.</p>\n\t\t\t\t<p>Sorteer opnieuw door de veldtitel te slepen.</p>\n\t\t\t\t<p>Maak het labelveld leeg om een aangepast veld te verwijderen.</p>\n\t\t\t\t<p>Niet-openbare velden zijn alleen zichtbaar voor de geselecteerde Friendica-contacten of de Friendica-contacten in de geselecteerde groepen.</p>";
+$a->strings["Delegation successfully granted."] = "Delegatie met succes verleend.";
+$a->strings["Parent user not found, unavailable or password doesn't match."] = "Brongebruiker niet gevonden, niet beschikbaar of wachtwoord komt niet overeen.";
+$a->strings["Delegation successfully revoked."] = "Delegatie is ingetrokken.";
+$a->strings["Delegated administrators can view but not change delegation permissions."] = "Gedelegeerde beheerders kunnen delegatierechten bekijken, maar niet wijzigen.";
+$a->strings["Delegate user not found."] = "Gemachtigde gebruiker niet gevonden.";
+$a->strings["No parent user"] = "Ouderlijke gebruiker ontbreekt";
+$a->strings["Parent User"] = "Ouderlijke gebruiker";
+$a->strings["Parent Password:"] = "Ouderlijk wachtwoord:";
+$a->strings["Please enter the password of the parent account to legitimize your request."] = "Geef alstublieft het wachtwoord van het ouderlijke account om je verzoek te legitimeren.";
+$a->strings["Additional Accounts"] = "Toegevoegde gebruikers";
+$a->strings["Register additional accounts that are automatically connected to your existing account so you can manage them from this account."] = "Registreer extra gebruikers die automatisch zijn verbonden met uw bestaande gebruiker, zodat u ze vanuit deze gebruiker kunt beheren.";
+$a->strings["Register an additional account"] = "Registreer een toegevoegde gebruiker";
+$a->strings["Parent users have total control about this account, including the account settings. Please double check whom you give this access."] = "Ouderlijke gebruikers hebben totale controle over dit account, de account instellingen inbegrepen. Dubbel check dus alstublieft aan wie je deze toegang geeft.";
+$a->strings["Manage Accounts"] = "Beheer Gebruikers";
+$a->strings["Delegates"] = "Gemachtigden";
+$a->strings["Delegates are able to manage all aspects of this account/page except for basic account settings. Please do not delegate your personal account to anybody that you do not trust completely."] = "Personen waaraan het beheer is uitbesteed kunnen alle onderdelen van een account/pagina beheren, behalve de basisinstellingen van een account. Besteed je persoonlijke account daarom niet uit aan personen die je niet volledig vertrouwt.";
+$a->strings["Existing Page Delegates"] = "Bestaande personen waaraan het paginabeheer is uitbesteed";
+$a->strings["Potential Delegates"] = "Mogelijke personen waaraan het paginabeheer kan worden uitbesteed ";
+$a->strings["Add"] = "Toevoegen";
+$a->strings["No entries."] = "Geen gegevens.";
+$a->strings["The theme you chose isn't available."] = "Het thema dat je koos is niet beschikbaar";
+$a->strings["%s - (Unsupported)"] = "%s - (Niet ondersteund)";
+$a->strings["Display Settings"] = "Scherminstellingen";
+$a->strings["General Theme Settings"] = "Algemene Thema Instellingen";
+$a->strings["Custom Theme Settings"] = "Speciale Thema Instellingen";
+$a->strings["Content Settings"] = "Content Instellingen";
+$a->strings["Calendar"] = "Kalender";
+$a->strings["Display Theme:"] = "Schermthema:";
+$a->strings["Mobile Theme:"] = "Mobiel thema:";
+$a->strings["Number of items to display per page:"] = "Aantal items te tonen per pagina:";
+$a->strings["Maximum of 100 items"] = "Maximum 100 items";
+$a->strings["Number of items to display per page when viewed from mobile device:"] = "Aantal items per pagina als je een mobiel toestel gebruikt:";
+$a->strings["Update browser every xx seconds"] = "Browser elke xx seconden verversen";
+$a->strings["Minimum of 10 seconds. Enter -1 to disable it."] = "Minimum 10 seconden. Geef -1 op om te deactiveren.";
+$a->strings["Don't show emoticons"] = "Emoticons niet tonen";
+$a->strings["Infinite scroll"] = "Oneindig scrollen";
+$a->strings["Disable the automatic suppression of extraneous thread indentation."] = "Schakel de automatische onderdrukking van vreemd inspringen uit.";
+$a->strings["Hide the Dislike feature"] = "Verberg de Afkeeroptie";
+$a->strings["Hides the Dislike button and dislike reactions on posts and comments."] = "Verbergt de knop Niet Leuk en Niet Leuke Reacties op berichten en opmerkingen.";
+$a->strings["Beginning of week:"] = "Begin van de week:";
+$a->strings["Export account"] = "Account exporteren";
+$a->strings["Export your account info and contacts. Use this to make a backup of your account and/or to move it to another server."] = "Je account informatie en contacten exporteren. Gebruik dit om een backup van je account te maken en/of om het te verhuizen naar een andere server.";
+$a->strings["Export all"] = "Alles exporteren";
+$a->strings["Export your account info, contacts and all your items as json. Could be a very big file, and could take a lot of time. Use this to make a full backup of your account (photos are not exported)"] = "Exporteer uw gebruikersgegevens, contacten en al uw items als json. Kan een heel groot bestand zijn en kan veel tijd in beslag nemen. Gebruik dit om een volledige back-up van uw account te maken (foto's worden niet geëxporteerd)";
+$a->strings["Export Contacts to CSV"] = "Export Contacten naar CSV";
+$a->strings["Export the list of the accounts you are following as CSV file. Compatible to e.g. Mastodon."] = "Exporteer de lijst met de gebruikers die u volgt als CSV-bestand. Compatibel met b.v. Mastodont.";
+$a->strings["Export personal data"] = "Persoonlijke gegevens exporteren";
+$a->strings["Bad Request"] = "Bad Request";
+$a->strings["Unauthorized"] = "Onbevoegd";
+$a->strings["Forbidden"] = "Niet toegestaan";
+$a->strings["Not Found"] = "Niet gevonden";
+$a->strings["The server is currently unavailable (because it is overloaded or down for maintenance). Please try again later."] = "De server is momenteel niet beschikbaar (omdat deze overbelast is of niet beschikbaar is door onderhoud). Probeer het later opnieuw.";
+$a->strings["Contact update failed."] = "Aanpassen van contact mislukt.";
+$a->strings["<strong>WARNING: This is highly advanced</strong> and if you enter incorrect information your communications with this contact may stop working."] = "<strong>WAARSCHUWING: Dit is zeer geavanceerd</strong> en als je verkeerde informatie invult, zal je mogelijk niet meer kunnen communiceren met deze contactpersoon.";
+$a->strings["Please use your browser 'Back' button <strong>now</strong> if you are uncertain what to do on this page."] = "Gebruik <strong>nu</strong> de \"terug\"-knop in je webbrowser wanneer je niet weet wat je op deze pagina moet doen.";
+$a->strings["No mirroring"] = "Geen mirroring";
+$a->strings["Mirror as forwarded posting"] = "Spiegel als geforward bericht";
+$a->strings["Mirror as my own posting"] = "Spiegel als mijn eigen bericht";
+$a->strings["Return to contact editor"] = "Ga terug naar contactbewerker";
+$a->strings["Refetch contact data"] = "Contact data opnieuw ophalen";
+$a->strings["Remote Self"] = "Mijn identiteit elders";
+$a->strings["Mirror postings from this contact"] = "Berichten van dit contact spiegelen";
+$a->strings["Mark this contact as remote_self, this will cause friendica to repost new entries from this contact."] = "Markeer dit contact als remote_self, hierdoor zal friendica nieuwe berichten van dit contact opnieuw posten.";
+$a->strings["Account Nickname"] = "Bijnaam account";
+$a->strings["@Tagname - overrides Name/Nickname"] = "@Labelnaam - krijgt voorrang op naam/bijnaam";
+$a->strings["Account URL"] = "URL account";
+$a->strings["Account URL Alias"] = "Account URL Alias";
+$a->strings["Friend Request URL"] = "URL vriendschapsverzoek";
+$a->strings["Friend Confirm URL"] = "URL vriendschapsbevestiging";
+$a->strings["Notification Endpoint URL"] = "Notificatie Endpoint URL";
+$a->strings["Poll/Feed URL"] = "URL poll/feed";
+$a->strings["New photo from this URL"] = "Nieuwe foto van deze URL";
+$a->strings["Poke/Prod"] = "Aanstoten/porren";
+$a->strings["poke, prod or do other things to somebody"] = "aanstoten, porren of andere dingen met iemand doen";
+$a->strings["Choose what you wish to do to recipient"] = "Kies wat je met de ontvanger wil doen";
+$a->strings["Make this post private"] = "Dit bericht privé maken";
+$a->strings["Method Not Allowed."] = "Methode niet toegestaan.";
+$a->strings["Page not found."] = "Pagina niet gevonden";
+$a->strings["Contact not found"] = "Contact niet gevonden";
+$a->strings["Remaining recovery codes: %d"] = "Resterende herstelcodes: %d";
+$a->strings["Two-factor recovery"] = "Twee-factorenherstel";
+$a->strings["<p>You can enter one of your one-time recovery codes in case you lost access to your mobile device.</p>"] = "<p>U kunt een van uw eenmalige herstelcodes invoeren als u de toegang tot uw mobiele apparaat bent kwijtgeraakt.</p>";
+$a->strings["Don’t have your phone? <a href=\"%s\">Enter a two-factor recovery code</a>"] = "Heb je je telefoon niet? <a href=\"%s\">Geef een twee-factor herstelcodecode in</a>";
+$a->strings["Please enter a recovery code"] = "Voer een herstelcode in";
+$a->strings["Submit recovery code and complete login"] = "Voer de herstelcode in en voltooi de login";
+$a->strings["<p>Open the two-factor authentication app on your device to get an authentication code and verify your identity.</p>"] = "<p>Open de tweefactorauthenticatie-app op uw apparaat om een authenticatiecode te krijgen en uw identiteit te verifiëren.</p>";
+$a->strings["Verify code and complete login"] = "Controleer de code en voltooi de login";