-$a->strings["Subscribing to OStatus contacts"] = "Subskrybowanie kontaktów OStatus";
-$a->strings["No contact provided."] = "Brak kontaktu.";
-$a->strings["Couldn't fetch information for contact."] = "Nie można pobrać informacji o kontakcie.";
-$a->strings["Couldn't fetch friends for contact."] = "Nie można pobrać znajomych do kontaktu.";
-$a->strings["success"] = "powodzenie";
-$a->strings["failed"] = "nie powiodło się";
-$a->strings["ignored"] = "ignorowany(-a)";
-$a->strings["%1\$s welcomes %2\$s"] = "%1\$s witamy %2\$s";
-$a->strings["User deleted their account"] = "Użytkownik usunął swoje konto";
-$a->strings["On your Friendica node an user deleted their account. Please ensure that their data is removed from the backups."] = "W twoim węźle Friendica użytkownik usunął swoje konto. Upewnij się, że ich dane zostały usunięte z kopii zapasowych.";
-$a->strings["The user id is %d"] = "Identyfikatorem użytkownika jest %d";
-$a->strings["Remove My Account"] = "Usuń moje konto";
-$a->strings["This will completely remove your account. Once this has been done it is not recoverable."] = "Spowoduje to całkowite usunięcie Twojego konta. Po wykonaniu tej czynności nie można jej cofnąć.";
-$a->strings["Please enter your password for verification:"] = "Wprowadź hasło w celu weryfikacji:";
-$a->strings["Remove Item Tag"] = "Usuń pozycję Tag";
-$a->strings["Select a tag to remove: "] = "Wybierz tag do usunięcia: ";
-$a->strings["Remove"] = "Usuń";
-$a->strings["No suggestions available. If this is a new site, please try again in 24 hours."] = "Brak dostępnych sugestii. Jeśli jest to nowa witryna, spróbuj ponownie za 24 godziny.";
-$a->strings["The requested item doesn't exist or has been deleted."] = "Żądany element nie istnieje lub został usunięty.";
-$a->strings["Access to this profile has been restricted."] = "Dostęp do tego profilu został ograniczony.";
-$a->strings["The feed for this item is unavailable."] = "Kanał dla tego elementu jest niedostępny.";
-$a->strings["Invalid request."] = "Nieprawidłowe żądanie.";
-$a->strings["Image exceeds size limit of %s"] = "Obraz przekracza limit rozmiaru wynoszący %s";
-$a->strings["Unable to process image."] = "Przetwarzanie obrazu nie powiodło się.";
-$a->strings["Wall Photos"] = "Tablica zdjęć";
-$a->strings["Image upload failed."] = "Przesyłanie obrazu nie powiodło się.";
-$a->strings["No valid account found."] = "Nie znaleziono ważnego konta.";
-$a->strings["Password reset request issued. Check your email."] = "Prośba o zresetowanie hasła została zatwierdzona. Sprawdź swój e-mail.";
-$a->strings["\n\t\tDear %1\$s,\n\t\t\tA request was recently received at \"%2\$s\" to reset your account\n\t\tpassword. In order to confirm this request, please select the verification link\n\t\tbelow or paste it into your web browser address bar.\n\n\t\tIf you did NOT request this change, please DO NOT follow the link\n\t\tprovided and ignore and/or delete this email, the request will expire shortly.\n\n\t\tYour password will not be changed unless we can verify that you\n\t\tissued this request."] = "\n\t\tSzanowny Użytkowniku %1\$s, \n\t\t\tOtrzymano prośbę o ''%2\$s\" zresetowanie hasła do konta. \n\t\tAby potwierdzić tę prośbę, kliknij link weryfikacyjny \n\t\tponiżej lub wklej go w pasek adresu przeglądarki internetowej. \n \n\t\tJeśli nie prosisz o tę zmianę, nie klikaj w link.\n\t\tJeśli zignorujesz i/lub usuniesz ten e-mail, prośba wkrótce wygaśnie. \n \n\t\tTwoje hasło nie zostanie zmienione, chyba że będziemy mogli potwierdzić \n\t\tTwoje żądanie.";
-$a->strings["\n\t\tFollow this link soon to verify your identity:\n\n\t\t%1\$s\n\n\t\tYou will then receive a follow-up message containing the new password.\n\t\tYou may change that password from your account settings page after logging in.\n\n\t\tThe login details are as follows:\n\n\t\tSite Location:\t%2\$s\n\t\tLogin Name:\t%3\$s"] = "\nPostępuj zgodnie z poniższym linkiem, aby zweryfikować swoją tożsamość: \n\n\t\t%1\$s\n\n\t\tOtrzymasz następnie komunikat uzupełniający zawierający nowe hasło. \n\t\tMożesz zmienić to hasło ze strony ustawień swojego konta po zalogowaniu. \n \n\t\tDane logowania są następujące: \n \nLokalizacja strony: \t%2\$s\nNazwa użytkownika:\t%3\$s";
-$a->strings["Password reset requested at %s"] = "Prośba o reset hasła na %s";
-$a->strings["Request could not be verified. (You may have previously submitted it.) Password reset failed."] = "Prośba nie może być zweryfikowana. (Mogłeś już ją poprzednio wysłać.) Reset hasła nie powiódł się.";
-$a->strings["Request has expired, please make a new one."] = "Żądanie wygasło. Zrób nowe.";
-$a->strings["Forgot your Password?"] = "Zapomniałeś hasła?";
-$a->strings["Enter your email address and submit to have your password reset. Then check your email for further instructions."] = "Wpisz swój adres email i wyślij, aby zresetować hasło. Później sprawdź swojego emaila w celu uzyskania dalszych instrukcji.";
-$a->strings["Nickname or Email: "] = "Pseudonim lub e-mail: ";
-$a->strings["Reset"] = "Zresetuj";
-$a->strings["Password Reset"] = "Zresetuj hasło";
-$a->strings["Your password has been reset as requested."] = "Twoje hasło zostało zresetowane zgodnie z żądaniem.";
-$a->strings["Your new password is"] = "Twoje nowe hasło to";
-$a->strings["Save or copy your new password - and then"] = "Zapisz lub skopiuj nowe hasło - a następnie";
-$a->strings["click here to login"] = "naciśnij tutaj, aby zalogować się";
-$a->strings["Your password may be changed from the <em>Settings</em> page after successful login."] = "Twoje hasło może być zmienione w <em>Ustawieniach</em> po udanym zalogowaniu.";
-$a->strings["Your password has been reset."] = "";
-$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tYour password has been changed as requested. Please retain this\n\t\t\tinformation for your records (or change your password immediately to\n\t\t\tsomething that you will remember).\n\t\t"] = "\n\t\t\tSzanowny Użytkowniku %1\$s, \n\t\t\t\tTwoje hasło zostało zmienione zgodnie z życzeniem. Proszę, zachowaj te \n\t\t\tinformacje dotyczące twoich rekordów (lub natychmiast zmień hasło na \n\t\t\tcoś, co zapamiętasz).\n\t\t";
-$a->strings["\n\t\t\tYour login details are as follows:\n\n\t\t\tSite Location:\t%1\$s\n\t\t\tLogin Name:\t%2\$s\n\t\t\tPassword:\t%3\$s\n\n\t\t\tYou may change that password from your account settings page after logging in.\n\t\t"] = "\n\t\t\tDane logowania są następujące:\n\n\t\t\tLokalizacja witryny:\t%1\$s\n\t\t\tNazwa użytkownika:\t%2\$s\n\t\t\tHasło:\t%3\$s\n\n\t\t\tMożesz zmienić hasło na stronie ustawień konta po zalogowaniu.\n\t\t";
-$a->strings["Your password has been changed at %s"] = "Twoje hasło zostało zmienione na %s";
-$a->strings["This introduction has already been accepted."] = "To wprowadzenie zostało już zaakceptowane.";
-$a->strings["Profile location is not valid or does not contain profile information."] = "Lokalizacja profilu jest nieprawidłowa lub nie zawiera informacji o profilu.";
-$a->strings["Warning: profile location has no identifiable owner name."] = "Ostrzeżenie: położenie profilu ma taką samą nazwę jak użytkownik.";
-$a->strings["Warning: profile location has no profile photo."] = "Ostrzeżenie: położenie profilu nie zawiera zdjęcia.";
-$a->strings["%d required parameter was not found at the given location"] = [
- 0 => "%d wymagany parametr nie został znaleziony w podanej lokacji",
- 1 => "%d wymagane parametry nie zostały znalezione w podanej lokacji",
- 2 => "%d wymagany parametr nie został znaleziony w podanej lokacji",
- 3 => "%d wymagany parametr nie został znaleziony w podanej lokacji",
-];
-$a->strings["Introduction complete."] = "Wprowadzanie zakończone.";
-$a->strings["Unrecoverable protocol error."] = "Nieodwracalny błąd protokołu.";
-$a->strings["Profile unavailable."] = "Profil niedostępny.";
-$a->strings["%s has received too many connection requests today."] = "%s otrzymał dziś zbyt wiele żądań połączeń.";
-$a->strings["Spam protection measures have been invoked."] = "Wprowadzono zabezpieczenia przed spamem.";
-$a->strings["Friends are advised to please try again in 24 hours."] = "Przyjaciele namawiają do spróbowania za 24h.";
-$a->strings["Invalid locator"] = "Nieprawidłowy lokalizator";
-$a->strings["You have already introduced yourself here."] = "Już się tu przedstawiłeś.";
-$a->strings["Apparently you are already friends with %s."] = "Wygląda na to, że już jesteście znajomymi z %s.";
-$a->strings["Invalid profile URL."] = "Nieprawidłowy adres URL profilu.";
-$a->strings["Disallowed profile URL."] = "Nie dozwolony adres URL profilu.";
-$a->strings["Blocked domain"] = "Zablokowana domena";
-$a->strings["Failed to update contact record."] = "Aktualizacja rekordu kontaktu nie powiodła się.";
-$a->strings["Your introduction has been sent."] = "Twoje dane zostały wysłane.";
-$a->strings["Remote subscription can't be done for your network. Please subscribe directly on your system."] = "Zdalnej subskrypcji nie można wykonać dla swojej sieci. Proszę zasubskrybuj bezpośrednio w swoim systemie.";
-$a->strings["Please login to confirm introduction."] = "Zaloguj się, aby potwierdzić wprowadzenie.";
-$a->strings["Incorrect identity currently logged in. Please login to <strong>this</strong> profile."] = "Niepoprawna tożsamość obecnego użytkownika. Proszę zalogować się na <strong>tego</strong> użytkownika. ";
-$a->strings["Confirm"] = "Potwierdź";
-$a->strings["Hide this contact"] = "Ukryj kontakt";
-$a->strings["Welcome home %s."] = "Witaj na stronie domowej %s.";
-$a->strings["Please confirm your introduction/connection request to %s."] = "Proszę potwierdzić swój wstęp/prośbę o połączenie do %s.";
-$a->strings["Friend/Connection Request"] = "Przyjaciel/Prośba o połączenie";
-$a->strings["Enter your Webfinger address (user@domain.tld) or profile URL here. If this isn't supported by your system (for example it doesn't work with Diaspora), you have to subscribe to <strong>%s</strong> directly on your system"] = "Wpisz tutaj swój adres Webfinger (user@domain.tld) lub adres URL profilu. Jeśli nie jest to obsługiwane przez system (na przykład nie działa z Diaspora), musisz subskrybować <strong>%s</strong> bezpośrednio w systemie";
-$a->strings["If you are not yet a member of the free social web, <a href=\"%s\">follow this link to find a public Friendica node and join us today</a>."] = "";
-$a->strings["Your Webfinger address or profile URL:"] = "Twój adres lub adres URL profilu Webfinger:";
-$a->strings["Please answer the following:"] = "Proszę odpowiedzieć na następujące pytania:";
-$a->strings["%s knows you"] = "%s zna cię";
-$a->strings["Add a personal note:"] = "Dodaj osobistą notkę:";
-$a->strings["Authorize application connection"] = "Autoryzacja połączenia aplikacji";
-$a->strings["Return to your app and insert this Securty Code:"] = "Powróć do swojej aplikacji i wpisz ten Kod Bezpieczeństwa:";
-$a->strings["Please login to continue."] = "Zaloguj się aby kontynuować.";
-$a->strings["Do you want to authorize this application to access your posts and contacts, and/or create new posts for you?"] = "Czy chcesz zezwolić tej aplikacji na dostęp do swoich postów i kontaktów i/lub tworzenie nowych postów?";
-$a->strings["No"] = "Nie";
-$a->strings["Sorry, maybe your upload is bigger than the PHP configuration allows"] = "Przepraszam, Twój przesyłany plik jest większy niż pozwala konfiguracja PHP";
-$a->strings["Or - did you try to upload an empty file?"] = "Lub - czy próbowałeś załadować pusty plik?";
-$a->strings["File exceeds size limit of %s"] = "Plik przekracza limit rozmiaru wynoszący %s";
-$a->strings["File upload failed."] = "Przesyłanie pliku nie powiodło się.";
-$a->strings["Unable to locate original post."] = "Nie można zlokalizować oryginalnej wiadomości.";
-$a->strings["Empty post discarded."] = "Pusty wpis został odrzucony.";
-$a->strings["Post updated."] = "Post zaktualizowany.";
-$a->strings["Item wasn't stored."] = "Element nie został zapisany. ";
-$a->strings["Item couldn't be fetched."] = "Nie można pobrać elementu.";
-$a->strings["Item not found."] = "Element nie znaleziony.";
-$a->strings["Do you really want to delete this item?"] = "Czy na pewno chcesz usunąć ten element?";
-$a->strings["User imports on closed servers can only be done by an administrator."] = "Import użytkowników na zamkniętych serwerach może być wykonywany tylko przez administratora.";
-$a->strings["This site has exceeded the number of allowed daily account registrations. Please try again tomorrow."] = "Strona przekroczyła ilość dozwolonych rejestracji na dzień. Proszę spróbuj ponownie jutro.";
-$a->strings["Import"] = "Import";
-$a->strings["Move account"] = "Przenieś konto";
-$a->strings["You can import an account from another Friendica server."] = "Możesz zaimportować konto z innego serwera Friendica.";
-$a->strings["You need to export your account from the old server and upload it here. We will recreate your old account here with all your contacts. We will try also to inform your friends that you moved here."] = "Musisz wyeksportować konto ze starego serwera i przesłać je tutaj. Odtworzymy twoje stare konto tutaj ze wszystkimi twoimi kontaktami. Postaramy się również poinformować twoich znajomych, że się tutaj przeniosłeś.";
-$a->strings["This feature is experimental. We can't import contacts from the OStatus network (GNU Social/Statusnet) or from Diaspora"] = "Ta funkcja jest eksperymentalna. Nie możemy importować kontaktów z sieci OStatus (GNU Social/Statusnet) lub z Diaspory";
-$a->strings["Account file"] = "Pliki konta";
-$a->strings["To export your account, go to \"Settings->Export your personal data\" and select \"Export account\""] = "Aby eksportować konto, wejdź w \"Ustawienia->Eksport danych osobistych\" i wybierz \"Eksportuj konto\"";
-$a->strings["User not found."] = "Użytkownik nie znaleziony.";
-$a->strings["View"] = "Widok";
-$a->strings["Previous"] = "Poprzedni";
-$a->strings["Next"] = "Następny";
-$a->strings["today"] = "dzisiaj";
-$a->strings["month"] = "miesiąc";
-$a->strings["week"] = "tydzień";
-$a->strings["day"] = "dzień";
-$a->strings["list"] = "lista";
-$a->strings["User not found"] = "Użytkownik nie znaleziony";
-$a->strings["This calendar format is not supported"] = "Ten format kalendarza nie jest obsługiwany";
-$a->strings["No exportable data found"] = "Nie znaleziono danych do eksportu";
-$a->strings["calendar"] = "kalendarz";
-$a->strings["Item not found"] = "Nie znaleziono elementu";
-$a->strings["Edit post"] = "Edytuj post";
-$a->strings["Save"] = "Zapisz";
-$a->strings["web link"] = "odnośnik sieciowy";
-$a->strings["Insert video link"] = "Wstaw link do filmu";
-$a->strings["video link"] = "link do filmu";
-$a->strings["Insert audio link"] = "Wstaw link do audio";
-$a->strings["audio link"] = "link do audio";
-$a->strings["CC: email addresses"] = "CC: adresy e-mail";
-$a->strings["Example: bob@example.com, mary@example.com"] = "Przykład: bob@example.com, mary@example.com";
-$a->strings["Event can not end before it has started."] = "Wydarzenie nie może się zakończyć przed jego rozpoczęciem.";
-$a->strings["Event title and start time are required."] = "Wymagany tytuł wydarzenia i czas rozpoczęcia.";
-$a->strings["Create New Event"] = "Stwórz nowe wydarzenie";
-$a->strings["Event details"] = "Szczegóły wydarzenia";
-$a->strings["Starting date and Title are required."] = "Data rozpoczęcia i tytuł są wymagane.";
-$a->strings["Event Starts:"] = "Rozpoczęcie wydarzenia:";
-$a->strings["Required"] = "Wymagany";
-$a->strings["Finish date/time is not known or not relevant"] = "Data/czas zakończenia nie jest znana lub jest nieistotna";
-$a->strings["Event Finishes:"] = "Zakończenie wydarzenia:";
-$a->strings["Adjust for viewer timezone"] = "Dopasuj dla strefy czasowej widza";
-$a->strings["Description:"] = "Opis:";
-$a->strings["Location:"] = "Lokalizacja:";
-$a->strings["Title:"] = "Tytuł:";
-$a->strings["Share this event"] = "Udostępnij te wydarzenie";
-$a->strings["Basic"] = "Podstawowy";
-$a->strings["Advanced"] = "Zaawansowany";
-$a->strings["Permissions"] = "Uprawnienia";
-$a->strings["Failed to remove event"] = "Nie udało się usunąć wydarzenia";
-$a->strings["The contact could not be added."] = "Nie można dodać kontaktu.";
-$a->strings["You already added this contact."] = "Już dodałeś ten kontakt.";
-$a->strings["The network type couldn't be detected. Contact can't be added."] = "Nie można wykryć typu sieci. Kontakt nie może zostać dodany.";
-$a->strings["Diaspora support isn't enabled. Contact can't be added."] = "Obsługa Diaspory nie jest włączona. Kontakt nie może zostać dodany.";
-$a->strings["OStatus support is disabled. Contact can't be added."] = "Obsługa OStatus jest wyłączona. Kontakt nie może zostać dodany.";
-$a->strings["Tags:"] = "Tagi:";
-$a->strings["Contact Photos"] = "Zdjęcia kontaktu";
-$a->strings["Upload"] = "Załaduj";
-$a->strings["Files"] = "Pliki";
-$a->strings["Personal Notes"] = "Notatki";
-$a->strings["Photo Albums"] = "Albumy zdjęć";
-$a->strings["Recent Photos"] = "Ostatnio dodane zdjęcia";
-$a->strings["Upload New Photos"] = "Wyślij nowe zdjęcie";
-$a->strings["everybody"] = "wszyscy";
-$a->strings["Contact information unavailable"] = "Informacje o kontakcie są niedostępne";
-$a->strings["Album not found."] = "Nie znaleziono albumu.";
-$a->strings["Album successfully deleted"] = "Album został pomyślnie usunięty";
-$a->strings["Album was empty."] = "Album był pusty.";
-$a->strings["Failed to delete the photo."] = "";
-$a->strings["a photo"] = "zdjęcie";
-$a->strings["%1\$s was tagged in %2\$s by %3\$s"] = "%1\$szostał oznaczony tagiem %2\$s przez %3\$s";
-$a->strings["Image upload didn't complete, please try again"] = "Przesyłanie zdjęć nie zostało zakończone, spróbuj ponownie";
-$a->strings["Image file is missing"] = "Brak pliku obrazu";
-$a->strings["Server can't accept new file upload at this time, please contact your administrator"] = "Serwer nie może teraz przyjąć nowego pliku, skontaktuj się z administratorem";
-$a->strings["Image file is empty."] = "Plik obrazka jest pusty.";
-$a->strings["No photos selected"] = "Nie zaznaczono zdjęć";
-$a->strings["Upload Photos"] = "Prześlij zdjęcia";
-$a->strings["New album name: "] = "Nazwa nowego albumu: ";
-$a->strings["or select existing album:"] = "lub wybierz istniejący album:";
-$a->strings["Do not show a status post for this upload"] = "Nie pokazuj statusu postów dla tego wysłania";
-$a->strings["Show to Groups"] = "Pokaż Grupy";
-$a->strings["Show to Contacts"] = "Pokaż kontakty";
-$a->strings["Do you really want to delete this photo album and all its photos?"] = "Czy na pewno chcesz usunąć ten album i wszystkie zdjęcia z tego albumu?";
-$a->strings["Delete Album"] = "Usuń album";
-$a->strings["Edit Album"] = "Edytuj album";
-$a->strings["Drop Album"] = "Upuść Album";
-$a->strings["Show Newest First"] = "Pokaż najpierw najnowsze";
-$a->strings["Show Oldest First"] = "Pokaż najpierw najstarsze";
-$a->strings["View Photo"] = "Zobacz zdjęcie";
-$a->strings["Permission denied. Access to this item may be restricted."] = "Odmowa dostępu. Dostęp do tych danych może być ograniczony.";
-$a->strings["Photo not available"] = "Zdjęcie niedostępne";
-$a->strings["Do you really want to delete this photo?"] = "Czy na pewno chcesz usunąć to zdjęcie ?";
-$a->strings["Delete Photo"] = "Usuń zdjęcie";
-$a->strings["View photo"] = "Zobacz zdjęcie";
-$a->strings["Edit photo"] = "Edytuj zdjęcie";
-$a->strings["Delete photo"] = "Usuń zdjęcie";
-$a->strings["Use as profile photo"] = "Ustaw jako zdjęcie profilowe";
-$a->strings["Private Photo"] = "Prywatne zdjęcie";
-$a->strings["View Full Size"] = "Zobacz w pełnym rozmiarze";
-$a->strings["Tags: "] = "Tagi: ";
-$a->strings["[Select tags to remove]"] = "[Wybierz tagi do usunięcia]";
-$a->strings["New album name"] = "Nazwa nowego albumu";
-$a->strings["Caption"] = "Zawartość";
-$a->strings["Add a Tag"] = "Dodaj tag";
-$a->strings["Example: @bob, @Barbara_Jensen, @jim@example.com, #California, #camping"] = "Przykładowo: @bob, @Barbara_Jensen, @jim@example.com, #California, #camping";
-$a->strings["Do not rotate"] = "Nie obracaj";
-$a->strings["Rotate CW (right)"] = "Obróć CW (w prawo)";
-$a->strings["Rotate CCW (left)"] = "Obróć CCW (w lewo)";
-$a->strings["I like this (toggle)"] = "Lubię to (zmień)";
-$a->strings["I don't like this (toggle)"] = "Nie lubię tego (zmień)";
-$a->strings["This is you"] = "To jesteś ty";
-$a->strings["Comment"] = "Komentarz";
-$a->strings["Map"] = "Mapa";
-$a->strings["You must be logged in to use addons. "] = "Musisz być zalogowany(-a), aby korzystać z dodatków. ";
-$a->strings["Delete this item?"] = "Usunąć ten element?";
-$a->strings["toggle mobile"] = "przełącz na mobilny";
-$a->strings["Login failed."] = "Logowanie nieudane.";
-$a->strings["We encountered a problem while logging in with the OpenID you provided. Please check the correct spelling of the ID."] = "Napotkaliśmy problem podczas logowania z podanym przez nas identyfikatorem OpenID. Sprawdź poprawną pisownię identyfikatora.";
-$a->strings["The error message was:"] = "Komunikat o błędzie:";
-$a->strings["Login failed. Please check your credentials."] = "Logowanie nie powiodło się. Sprawdź swoje dane uwierzytelniające.";
-$a->strings["Welcome %s"] = "Witaj %s";
-$a->strings["Please upload a profile photo."] = "Proszę dodać zdjęcie profilowe.";
-$a->strings["Method not allowed for this module. Allowed method(s): %s"] = "Metoda niedozwolona dla tego modułu. Dozwolona metoda(y): %s";
-$a->strings["Page not found."] = "Strona nie znaleziona.";
-$a->strings["There are no tables on MyISAM or InnoDB with the Antelope file format."] = "Brak tabel w MyISAM lub InnoDB z formatem pliku Antelope.";
-$a->strings["\nError %d occurred during database update:\n%s\n"] = "\nWystąpił błąd %d podczas aktualizacji bazy danych:\n%s\n";
-$a->strings["Errors encountered performing database changes: "] = "Błędy napotkane podczas dokonywania zmian w bazie danych: ";
-$a->strings["Another database update is currently running."] = "";
-$a->strings["%s: Database update"] = "%s: Aktualizacja bazy danych";
-$a->strings["%s: updating %s table."] = "%s: aktualizowanie %s tabeli.";
-$a->strings["Database error %d \"%s\" at \"%s\""] = "";
-$a->strings["Friendica can't display this page at the moment, please contact the administrator."] = "";
-$a->strings["template engine cannot be registered without a name."] = "";
-$a->strings["template engine is not registered!"] = "";
-$a->strings["Update %s failed. See error logs."] = "Aktualizacja %s nie powiodła się. Zobacz dziennik błędów.";
-$a->strings["\n\t\t\t\tThe friendica developers released update %s recently,\n\t\t\t\tbut when I tried to install it, something went terribly wrong.\n\t\t\t\tThis needs to be fixed soon and I can't do it alone. Please contact a\n\t\t\t\tfriendica developer if you can not help me on your own. My database might be invalid."] = "\n\t\t\t\tDeweloperzy friendica wydali niedawno aktualizację %s,\n\t\t\t\tale podczas próby instalacji, coś poszło nie tak.\n\t\t\t\tZostanie to naprawione wkrótce i nie mogę tego zrobić sam. Proszę skontaktować się z \n\t\t\t\tprogramistami friendica, jeśli nie możesz mi pomóc na własną rękę. Moja baza danych może być nieprawidłowa.";
-$a->strings["The error message is\n[pre]%s[/pre]"] = "Komunikat o błędzie jest \n[pre]%s[/ pre]";
-$a->strings["[Friendica Notify] Database update"] = "[Powiadomienie Friendica] Aktualizacja bazy danych";
-$a->strings["\n\t\t\t\t\tThe friendica database was successfully updated from %s to %s."] = "\n\t\t\t\t\tBaza danych Friendica została pomyślnie zaktualizowana z %s do %s.";
-$a->strings["Yourself"] = "";
-$a->strings["Followers"] = "Zwolenników";
-$a->strings["Mutuals"] = "Wzajemne";
-$a->strings["Post to Email"] = "Prześlij e-mailem";
-$a->strings["Public"] = "Publiczny";
-$a->strings["This content will be shown to all your followers and can be seen in the community pages and by anyone with its link."] = "Ta treść zostanie wyświetlona wszystkim Twoim obserwatorom i będzie widoczna na stronach społeczności oraz przez każdego z jej linkiem.";
-$a->strings["Limited/Private"] = "Ograniczony/Prywatny";
-$a->strings["This content will be shown only to the people in the first box, to the exception of the people mentioned in the second box. It won't appear anywhere public."] = "Ta zawartość będzie wyświetlana tylko osobom w pierwszym polu, z wyjątkiem osób wymienionych w drugim polu. Nie pojawi się nigdzie publicznie.";
-$a->strings["Show to:"] = "Pokaż na:";
-$a->strings["Except to:"] = "Z wyjątkiem:";
-$a->strings["Connectors"] = "Wtyczki";
-$a->strings["The database configuration file \"config/local.config.php\" could not be written. Please use the enclosed text to create a configuration file in your web server root."] = "Plik konfiguracyjny bazy danych \"config/local.config.php\" nie mógł zostać zapisany. Proszę użyć załączonego tekstu, aby utworzyć plik konfiguracyjny w katalogu głównym serwera.";
-$a->strings["You may need to import the file \"database.sql\" manually using phpmyadmin or mysql."] = "Może być konieczne zaimportowanie pliku \"database.sql\" ręcznie, używając phpmyadmin lub mysql.";
-$a->strings["Please see the file \"INSTALL.txt\"."] = "Proszę przejrzeć plik \"INSTALL.txt\".";
-$a->strings["Could not find a command line version of PHP in the web server PATH."] = "Nie można znaleźć PHP dla wiersza poleceń w PATH serwera.";
-$a->strings["If you don't have a command line version of PHP installed on your server, you will not be able to run the background processing. See <a href='https://github.com/friendica/friendica/blob/stable/doc/Install.md#set-up-the-worker'>'Setup the worker'</a>"] = "";
-$a->strings["PHP executable path"] = "Ścieżka wykonywalna PHP";
-$a->strings["Enter full path to php executable. You can leave this blank to continue the installation."] = "Wprowadź pełną ścieżkę do pliku wykonywalnego php. Możesz pozostawić to pole puste, aby kontynuować instalację.";
-$a->strings["Command line PHP"] = "Linia komend PHP";
-$a->strings["PHP executable is not the php cli binary (could be cgi-fgci version)"] = "Plik wykonywalny PHP nie jest php cli binarny (może być wersją cgi-fgci)";
-$a->strings["Found PHP version: "] = "Znaleziona wersja PHP: ";
-$a->strings["PHP cli binary"] = "PHP cli binarny";
-$a->strings["The command line version of PHP on your system does not have \"register_argc_argv\" enabled."] = "Wersja linii poleceń PHP w twoim systemie nie ma aktywowanego \"register_argc_argv\".";
-$a->strings["This is required for message delivery to work."] = "Jest wymagane, aby dostarczanie wiadomości działało.";
-$a->strings["PHP register_argc_argv"] = "PHP register_argc_argv";
-$a->strings["Error: the \"openssl_pkey_new\" function on this system is not able to generate encryption keys"] = "Błąd: funkcja \"openssl_pkey_new\" w tym systemie nie jest w stanie wygenerować kluczy szyfrujących";
-$a->strings["If running under Windows, please see \"http://www.php.net/manual/en/openssl.installation.php\"."] = "Jeśli korzystasz z Windowsa, proszę odwiedzić \"http://www.php.net/manual/en/openssl.installation.php\".";
-$a->strings["Generate encryption keys"] = "Generuj klucz kodowania";
-$a->strings["Error: Apache webserver mod-rewrite module is required but not installed."] = "Błąd: moduł Apache webserver mod-rewrite jest potrzebny, jednakże nie jest zainstalowany.";
-$a->strings["Apache mod_rewrite module"] = "Moduł Apache mod_rewrite";
-$a->strings["Error: PDO or MySQLi PHP module required but not installed."] = "Błąd: Wymagany moduł PDO lub MySQLi PHP, ale nie zainstalowany.";
-$a->strings["Error: The MySQL driver for PDO is not installed."] = "Błąd: Sterownik MySQL dla PDO nie jest zainstalowany.";
-$a->strings["PDO or MySQLi PHP module"] = "Moduł PDO lub MySQLi PHP";
-$a->strings["Error, XML PHP module required but not installed."] = "Błąd, wymagany moduł XML PHP, ale nie zainstalowany.";
-$a->strings["XML PHP module"] = "Moduł XML PHP";
-$a->strings["libCurl PHP module"] = "Moduł PHP libCurl";
-$a->strings["Error: libCURL PHP module required but not installed."] = "Błąd: libCURL PHP wymagany moduł, lecz nie zainstalowany.";
-$a->strings["GD graphics PHP module"] = "Moduł PHP-GD";
-$a->strings["Error: GD graphics PHP module with JPEG support required but not installed."] = "Błąd: moduł graficzny GD z PHP potrzebuje wsparcia technicznego JPEG, jednakże on nie jest zainstalowany.";
-$a->strings["OpenSSL PHP module"] = "Moduł PHP OpenSSL";
-$a->strings["Error: openssl PHP module required but not installed."] = "Błąd: openssl PHP wymagany moduł, lecz nie zainstalowany.";
-$a->strings["mb_string PHP module"] = "Moduł PHP mb_string";
-$a->strings["Error: mb_string PHP module required but not installed."] = "Błąd: moduł PHP mb_string jest wymagany ,ale nie jest zainstalowany.";
-$a->strings["iconv PHP module"] = "Moduł PHP iconv";
-$a->strings["Error: iconv PHP module required but not installed."] = "Błąd: wymagany moduł PHP iconv, ale nie zainstalowany.";
-$a->strings["POSIX PHP module"] = "Moduł POSIX PHP";
-$a->strings["Error: POSIX PHP module required but not installed."] = "Błąd: wymagany moduł POSIX PHP, ale nie zainstalowany.";
-$a->strings["JSON PHP module"] = "Moduł PHP JSON";
-$a->strings["Error: JSON PHP module required but not installed."] = "Błąd: wymagany jest moduł JSON PHP, ale nie jest zainstalowany.";
-$a->strings["File Information PHP module"] = "Informacje o pliku Moduł PHP";
-$a->strings["Error: File Information PHP module required but not installed."] = "Błąd: wymagane informacje o pliku Moduł PHP, ale nie jest zainstalowany.";
-$a->strings["The web installer needs to be able to create a file called \"local.config.php\" in the \"config\" folder of your web server and it is unable to do so."] = "Instalator internetowy musi mieć możliwość utworzenia pliku o nazwie \"local.config.php\" w folderze \"config\" serwera WWW i nie może tego zrobić.";
-$a->strings["This is most often a permission setting, as the web server may not be able to write files in your folder - even if you can."] = "Jest to najczęściej ustawienie uprawnień, ponieważ serwer sieciowy może nie być w stanie zapisywać plików w folderze - nawet jeśli możesz.";
-$a->strings["At the end of this procedure, we will give you a text to save in a file named local.config.php in your Friendica \"config\" folder."] = "Pod koniec tej procedury otrzymasz tekst do zapisania w pliku o nazwie local.config.php w folderze \"config\" Friendica.";
-$a->strings["You can alternatively skip this procedure and perform a manual installation. Please see the file \"INSTALL.txt\" for instructions."] = "Alternatywnie można pominąć tę procedurę i wykonać ręczną instalację. Proszę zobaczyć plik 'INSTALL.txt' z instrukcjami.";
-$a->strings["config/local.config.php is writable"] = "config/local.config.php jest zapisywalny";
-$a->strings["Friendica uses the Smarty3 template engine to render its web views. Smarty3 compiles templates to PHP to speed up rendering."] = "Friendica używa silnika szablonów Smarty3 do renderowania swoich widoków. Smarty3 kompiluje szablony do PHP, aby przyspieszyć renderowanie.";
-$a->strings["In order to store these compiled templates, the web server needs to have write access to the directory view/smarty3/ under the Friendica top level folder."] = "Aby przechowywać te skompilowane szablony, serwer WWW musi mieć dostęp do zapisu do katalogu view/smarty3/ w folderze najwyższego poziomu Friendica.";
-$a->strings["Please ensure that the user that your web server runs as (e.g. www-data) has write access to this folder."] = "Upewnij się, że użytkownik, na którym działa serwer WWW (np. www-data), ma prawo do zapisu do tego folderu.";
-$a->strings["Note: as a security measure, you should give the web server write access to view/smarty3/ only--not the template files (.tpl) that it contains."] = "Uwaga: jako środek bezpieczeństwa, powinieneś dać serwerowi dostęp do zapisu view/smarty3/ jedynie - nie do plików szablonów (.tpl), które zawiera.";
-$a->strings["view/smarty3 is writable"] = "view/smarty3 jest zapisywalny";
-$a->strings["Url rewrite in .htaccess is not working. Make sure you copied .htaccess-dist to .htaccess."] = "Adres URL zapisany w .htaccess nie działa. Upewnij się, że skopiowano .htaccess-dist do .htaccess.";
-$a->strings["Error message from Curl when fetching"] = "Komunikat o błędzie z Curl podczas pobierania";
-$a->strings["Url rewrite is working"] = "Działający adres URL";
-$a->strings["ImageMagick PHP extension is not installed"] = "Rozszerzenie PHP ImageMagick nie jest zainstalowane";
-$a->strings["ImageMagick PHP extension is installed"] = "Rozszerzenie PHP ImageMagick jest zainstalowane";
-$a->strings["ImageMagick supports GIF"] = "ImageMagick obsługuje GIF";
-$a->strings["Database already in use."] = "Baza danych jest już w użyciu.";
-$a->strings["Could not connect to database."] = "Nie można połączyć się z bazą danych.";
-$a->strings["Monday"] = "Poniedziałek";
-$a->strings["Tuesday"] = "Wtorek";
-$a->strings["Wednesday"] = "Środa";
-$a->strings["Thursday"] = "Czwartek";
-$a->strings["Friday"] = "Piątek";
-$a->strings["Saturday"] = "Sobota";
-$a->strings["Sunday"] = "Niedziela";
-$a->strings["January"] = "Styczeń";
-$a->strings["February"] = "Luty";
-$a->strings["March"] = "Marzec";
-$a->strings["April"] = "Kwiecień";
-$a->strings["May"] = "Maj";
-$a->strings["June"] = "Czerwiec";
-$a->strings["July"] = "Lipiec";
-$a->strings["August"] = "Sierpień";
-$a->strings["September"] = "Wrzesień";
-$a->strings["October"] = "Październik";
-$a->strings["November"] = "Listopad";
-$a->strings["December"] = "Grudzień";
-$a->strings["Mon"] = "Pon";
-$a->strings["Tue"] = "Wt";
-$a->strings["Wed"] = "Śr";
-$a->strings["Thu"] = "Czw";
-$a->strings["Fri"] = "Pt";
-$a->strings["Sat"] = "Sob";
-$a->strings["Sun"] = "Niedz";
-$a->strings["Jan"] = "Sty";
-$a->strings["Feb"] = "Lut";
-$a->strings["Mar"] = "Mar";
-$a->strings["Apr"] = "Kwi";
-$a->strings["Jun"] = "Cze";
-$a->strings["Jul"] = "Lip";
-$a->strings["Aug"] = "Sie";
-$a->strings["Sep"] = "Wrz";
-$a->strings["Oct"] = "Paź";
-$a->strings["Nov"] = "Lis";
-$a->strings["Dec"] = "Gru";
-$a->strings["poke"] = "zaczep";
-$a->strings["poked"] = "zaczepił Cię";
-$a->strings["ping"] = "ping";
-$a->strings["pinged"] = "napięcia";
-$a->strings["prod"] = "zaczep";
-$a->strings["prodded"] = "zaczepiać";
-$a->strings["slap"] = "klask";
-$a->strings["slapped"] = "spoliczkowany";
-$a->strings["finger"] = "wskaż";
-$a->strings["fingered"] = "dotknięty";
-$a->strings["rebuff"] = "odrzuć";
-$a->strings["rebuffed"] = "odrzucony";
-$a->strings["Error decoding account file"] = "Błąd podczas odczytu pliku konta";
-$a->strings["Error! No version data in file! This is not a Friendica account file?"] = "Błąd! Brak danych wersji w pliku! To nie jest plik konta Friendica?";
-$a->strings["User '%s' already exists on this server!"] = "Użytkownik '%s' już istnieje na tym serwerze!";
-$a->strings["User creation error"] = "Błąd tworzenia użytkownika";
-$a->strings["%d contact not imported"] = [
- 0 => "Nie zaimportowano %d kontaktu",
- 1 => "Nie zaimportowano %d kontaktów",
- 2 => "Nie zaimportowano %d kontaktów",
- 3 => "%d kontakty nie zostały zaimportowane ",
-];
-$a->strings["User profile creation error"] = "Błąd tworzenia profilu użytkownika";
-$a->strings["Done. You can now login with your username and password"] = "Gotowe. Możesz teraz zalogować się z użyciem nazwy użytkownika i hasła";
-$a->strings["Legacy module file not found: %s"] = "Nie znaleziono pliku modułu: %s";
-$a->strings["(no subject)"] = "(bez tematu)";
-$a->strings["This message was sent to you by %s, a member of the Friendica social network."] = "Wiadomość została wysłana do ciebie od %s, członka sieci społecznościowej Friendica.";
-$a->strings["You may visit them online at %s"] = "Możesz odwiedzić ich online pod adresem %s";
-$a->strings["Please contact the sender by replying to this post if you do not wish to receive these messages."] = "Skontaktuj się z nadawcą odpowiadając na ten post jeśli nie chcesz otrzymywać tych wiadomości.";
-$a->strings["%s posted an update."] = "%s zaktualizował wpis.";
-$a->strings["This entry was edited"] = "Ten wpis został zedytowany";
-$a->strings["Private Message"] = "Wiadomość prywatna";
-$a->strings["pinned item"] = "";
-$a->strings["Delete locally"] = "Usuń lokalnie";
-$a->strings["Delete globally"] = "Usuń globalnie";
-$a->strings["Remove locally"] = "Usuń lokalnie";
-$a->strings["save to folder"] = "zapisz w folderze";
-$a->strings["I will attend"] = "Będę uczestniczyć";
-$a->strings["I will not attend"] = "Nie będę uczestniczyć";
-$a->strings["I might attend"] = "Mogę wziąć udział";
-$a->strings["ignore thread"] = "zignoruj wątek";
-$a->strings["unignore thread"] = "odignoruj wątek";
-$a->strings["toggle ignore status"] = "przełącz status ignorowania";
-$a->strings["pin"] = "przypnij";
-$a->strings["unpin"] = "odepnij";
-$a->strings["toggle pin status"] = "";
-$a->strings["pinned"] = "Przypięte";
-$a->strings["add star"] = "dodaj gwiazdkę";
-$a->strings["remove star"] = "anuluj gwiazdkę";
-$a->strings["toggle star status"] = "włącz status gwiazdy";
-$a->strings["starred"] = "gwiazdką";
-$a->strings["add tag"] = "dodaj tag";
-$a->strings["like"] = "lubię to";
-$a->strings["dislike"] = "nie lubię tego";
-$a->strings["Share this"] = "Udostępnij to";
-$a->strings["share"] = "udostępnij";
-$a->strings["%s (Received %s)"] = "";
-$a->strings["Comment this item on your system"] = "";
-$a->strings["remote comment"] = "";
-$a->strings["Pushed"] = "";
-$a->strings["Pulled"] = "";
-$a->strings["to"] = "do";
-$a->strings["via"] = "przez";
-$a->strings["Wall-to-Wall"] = "Wall-to-Wall";
-$a->strings["via Wall-To-Wall:"] = "via Wall-To-Wall:";
-$a->strings["Reply to %s"] = "Odpowiedź %s";
-$a->strings["More"] = "Więcej";
-$a->strings["Notifier task is pending"] = "Zadanie Notifier jest w toku";
-$a->strings["Delivery to remote servers is pending"] = "Trwa przesyłanie do serwerów zdalnych";
-$a->strings["Delivery to remote servers is underway"] = "Trwa dostawa do serwerów zdalnych";
-$a->strings["Delivery to remote servers is mostly done"] = "Dostawa do zdalnych serwerów jest w większości wykonywana";
-$a->strings["Delivery to remote servers is done"] = "Trwa dostarczanie do zdalnych serwerów";
-$a->strings["%d comment"] = [
- 0 => "%d komentarz",
- 1 => "%d komentarze",
- 2 => "%d komentarzy",
- 3 => "%d komentarzy",
-];
-$a->strings["Show more"] = "Pokaż więcej";
-$a->strings["Show fewer"] = "Pokaż mniej";
-$a->strings["comment"] = [
- 0 => "komentarz",
- 1 => "komentarze",
- 2 => "komentarze",
- 3 => "komentarz",
-];
-$a->strings["Could not find any unarchived contact entry for this URL (%s)"] = "Nie można znaleźć żadnego wpisu kontaktu zarchiwizowanego dla tego adresu URL (%s)";
-$a->strings["The contact entries have been archived"] = "Wpisy kontaktów zostały zarchiwizowane";
-$a->strings["Could not find any contact entry for this URL (%s)"] = "Nie można znaleźć żadnego kontaktu dla tego adresu URL (%s)";
-$a->strings["The contact has been blocked from the node"] = "Kontakt został zablokowany w węźle";
-$a->strings["Enter new password: "] = "Wprowadź nowe hasło: ";
-$a->strings["Enter user name: "] = "Wpisz nazwę użytkownika:";
-$a->strings["Enter user nickname: "] = "Wpisz nazwę użytkownika:";
-$a->strings["Enter user email address: "] = "Wpisz adres e-mail użytkownika:";
-$a->strings["Enter a language (optional): "] = "Wpisz język (opcjonalnie):";
-$a->strings["User is not pending."] = "";
-$a->strings["User has already been marked for deletion."] = "";
-$a->strings["Type \"yes\" to delete %s"] = "Wpisz „tak”, aby usunąć %s";
-$a->strings["Deletion aborted."] = "";
-$a->strings["Post update version number has been set to %s."] = "Numer wersji aktualizacji posta został ustawiony na %s.";
-$a->strings["Check for pending update actions."] = "Sprawdź oczekujące działania aktualizacji.";
-$a->strings["Done."] = "Gotowe.";
-$a->strings["Execute pending post updates."] = "Wykonaj oczekujące aktualizacje postów.";
-$a->strings["All pending post updates are done."] = "Wszystkie oczekujące aktualizacje postów są gotowe.";
-$a->strings["The folder view/smarty3/ must be writable by webserver."] = "";
-$a->strings["Hometown:"] = "Miasto rodzinne:";
-$a->strings["Marital Status:"] = "Stan cywilny:";
-$a->strings["With:"] = "Z:";
-$a->strings["Since:"] = "Od:";
-$a->strings["Sexual Preference:"] = "Preferencje seksualne:";
-$a->strings["Political Views:"] = "Poglądy polityczne:";
-$a->strings["Religious Views:"] = "Poglądy religijne:";
-$a->strings["Likes:"] = "Lubię to:";
-$a->strings["Dislikes:"] = "Nie lubię tego:";
-$a->strings["Title/Description:"] = "Tytuł/Opis:";
-$a->strings["Summary"] = "Podsumowanie";
-$a->strings["Musical interests"] = "Muzyka";
-$a->strings["Books, literature"] = "Literatura";
-$a->strings["Television"] = "Telewizja";
-$a->strings["Film/dance/culture/entertainment"] = "Film/taniec/kultura/rozrywka";
-$a->strings["Hobbies/Interests"] = "Zainteresowania";
-$a->strings["Love/romance"] = "Miłość/romans";
-$a->strings["Work/employment"] = "Praca/zatrudnienie";
-$a->strings["School/education"] = "Szkoła/edukacja";
-$a->strings["Contact information and Social Networks"] = "Dane kontaktowe i Sieci społecznościowe";
-$a->strings["No system theme config value set."] = "Nie ustawiono wartości konfiguracyjnej zestawu tematycznego.";
-$a->strings["Friend Suggestion"] = "Propozycja znajomych";
-$a->strings["Friend/Connect Request"] = "Prośba o dodanie do przyjaciół/powiązanych";
-$a->strings["New Follower"] = "Nowy obserwujący";
-$a->strings["%s created a new post"] = "%s dodał nowy wpis";
-$a->strings["%s commented on %s's post"] = "%s skomentował wpis %s";
-$a->strings["%s liked %s's post"] = "%s polubił wpis %s";
-$a->strings["%s disliked %s's post"] = "%s nie lubi tych %s postów";
-$a->strings["%s is attending %s's event"] = "%s uczestniczy w wydarzeniu %s";
-$a->strings["%s is not attending %s's event"] = "%s nie uczestniczy w wydarzeniu %s";
-$a->strings["%s may attending %s's event"] = "";
-$a->strings["%s is now friends with %s"] = "%s jest teraz znajomym %s";
-$a->strings["Network Notifications"] = "Powiadomienia sieciowe";
-$a->strings["System Notifications"] = "Powiadomienia systemowe";
-$a->strings["Personal Notifications"] = "Prywatne powiadomienia";
-$a->strings["Home Notifications"] = "Powiadomienia domowe";
-$a->strings["No more %s notifications."] = "Brak kolejnych %s powiadomień.";
-$a->strings["Show unread"] = "Pokaż nieprzeczytane";
-$a->strings["Show all"] = "Pokaż wszystko";
-$a->strings["You must be logged in to show this page."] = "";
-$a->strings["Notifications"] = "Powiadomienia";
-$a->strings["Show Ignored Requests"] = "Pokaż ignorowane żądania";
-$a->strings["Hide Ignored Requests"] = "Ukryj zignorowane prośby";
-$a->strings["Notification type:"] = "Typ powiadomienia:";
-$a->strings["Suggested by:"] = "Sugerowany przez:";
-$a->strings["Hide this contact from others"] = "Ukryj ten kontakt przed innymi";
-$a->strings["Approve"] = "Zatwierdź";
-$a->strings["Claims to be known to you: "] = "Twierdzi, że go/ją znasz: ";
-$a->strings["Shall your connection be bidirectional or not?"] = "Czy twoje połączenie ma być dwukierunkowe, czy nie?";
-$a->strings["Accepting %s as a friend allows %s to subscribe to your posts, and you will also receive updates from them in your news feed."] = "Przyjmowanie %s jako znajomego pozwala %s zasubskrybować twoje posty, a także otrzymywać od nich aktualizacje w swoim kanale wiadomości.";
-$a->strings["Accepting %s as a subscriber allows them to subscribe to your posts, but you will not receive updates from them in your news feed."] = "Zaakceptowanie %s jako subskrybenta umożliwia im subskrybowanie Twoich postów, ale nie otrzymasz od nich aktualizacji w swoim kanale wiadomości.";
-$a->strings["Friend"] = "Znajomy";
-$a->strings["Subscriber"] = "Subskrybent";
-$a->strings["About:"] = "O:";
-$a->strings["Network:"] = "Sieć:";
-$a->strings["No introductions."] = "Brak dostępu.";
-$a->strings["A Decentralized Social Network"] = "";
-$a->strings["Logged out."] = "Wylogowano.";
-$a->strings["Invalid code, please retry."] = "Nieprawidłowy kod, spróbuj ponownie.";
-$a->strings["Two-factor authentication"] = "Uwierzytelnianie dwuskładnikowe";
-$a->strings["<p>Open the two-factor authentication app on your device to get an authentication code and verify your identity.</p>"] = "<p>Otwórz aplikację uwierzytelniania dwuskładnikowego na swoim urządzeniu, aby uzyskać kod uwierzytelniający i zweryfikować swoją tożsamość.</p>";
-$a->strings["Don’t have your phone? <a href=\"%s\">Enter a two-factor recovery code</a>"] = "Nie masz telefonu? <a href=\"%s\">Wprowadzić dwuetapowy kod przywracania </a>";
-$a->strings["Please enter a code from your authentication app"] = "Wprowadź kod z aplikacji uwierzytelniającej";
-$a->strings["Verify code and complete login"] = "Zweryfikuj kod i zakończ logowanie";
-$a->strings["Remaining recovery codes: %d"] = "Pozostałe kody odzyskiwania: %d";
-$a->strings["Two-factor recovery"] = "Odzyskiwanie dwuczynnikowe";
-$a->strings["<p>You can enter one of your one-time recovery codes in case you lost access to your mobile device.</p>"] = "<p>Możesz wprowadzić jeden ze swoich jednorazowych kodów odzyskiwania w przypadku utraty dostępu do urządzenia mobilnego.</p>";
-$a->strings["Please enter a recovery code"] = "Wprowadź kod odzyskiwania";
-$a->strings["Submit recovery code and complete login"] = "Prześlij kod odzyskiwania i pełne logowanie";
-$a->strings["Create a New Account"] = "Załóż nowe konto";
-$a->strings["Register"] = "Zarejestruj";
-$a->strings["Your OpenID: "] = "";
-$a->strings["Please enter your username and password to add the OpenID to your existing account."] = "Wprowadź nazwę użytkownika i hasło, aby dodać OpenID do istniejącego konta.";
-$a->strings["Or login using OpenID: "] = "Lub zaloguj się za pośrednictwem OpenID: ";
-$a->strings["Logout"] = "Wyloguj";
-$a->strings["Login"] = "Zaloguj się";
-$a->strings["Password: "] = "Hasło: ";
-$a->strings["Remember me"] = "Zapamiętaj mnie";
-$a->strings["Forgot your password?"] = "Zapomniałeś swojego hasła?";
-$a->strings["Website Terms of Service"] = "Warunki korzystania z witryny";
-$a->strings["terms of service"] = "warunki użytkowania";
-$a->strings["Website Privacy Policy"] = "Polityka Prywatności Witryny";
-$a->strings["privacy policy"] = "polityka prywatności";
-$a->strings["OpenID protocol error. No ID returned"] = "";
-$a->strings["Account not found. Please login to your existing account to add the OpenID to it."] = "Konto nie znalezione. Zaloguj się do swojego istniejącego konta, aby dodać do niego OpenID.";
-$a->strings["Account not found. Please register a new account or login to your existing account to add the OpenID to it."] = "Konto nie znalezione. Zarejestruj nowe konto lub zaloguj się na istniejące konto, aby dodać do niego OpenID.";
-$a->strings["l F d, Y \\@ g:i A"] = "l F d, Y \\@ g:i A";
-$a->strings["Time Conversion"] = "Zmiana czasu";
-$a->strings["Friendica provides this service for sharing events with other networks and friends in unknown timezones."] = "Friendica udostępnia tę usługę do udostępniania wydarzeń innym sieciom i znajomym w nieznanych strefach czasowych.";
-$a->strings["UTC time: %s"] = "Czas UTC %s";
-$a->strings["Current timezone: %s"] = "Obecna strefa czasowa: %s";
-$a->strings["Converted localtime: %s"] = "Zmień strefę czasową: %s";
-$a->strings["Please select your timezone:"] = "Wybierz swoją strefę czasową:";
-$a->strings["Source input"] = "Źródło wejściowe";
-$a->strings["BBCode::toPlaintext"] = "BBCode::na prosty tekst";
-$a->strings["BBCode::convert (raw HTML)"] = "BBCode:: konwersjia (raw HTML)";
-$a->strings["BBCode::convert"] = "BBCode::przekształć";
-$a->strings["BBCode::convert => HTML::toBBCode"] = "BBCode::przekształć => HTML::toBBCode";
-$a->strings["BBCode::toMarkdown"] = "BBCode::toMarkdown";
-$a->strings["BBCode::toMarkdown => Markdown::convert (raw HTML)"] = "";
-$a->strings["BBCode::toMarkdown => Markdown::convert"] = "BBCode::toMarkdown => Markdown::przekształć";
-$a->strings["BBCode::toMarkdown => Markdown::toBBCode"] = "BBCode::toMarkdown => Markdown::toBBCode";
-$a->strings["BBCode::toMarkdown => Markdown::convert => HTML::toBBCode"] = "BBCode::toMarkdown => Markdown::przekształć => HTML::toBBCode";
-$a->strings["Item Body"] = "Element Body";
-$a->strings["Item Tags"] = "Element Tagów";
-$a->strings["PageInfo::appendToBody"] = "";
-$a->strings["PageInfo::appendToBody => BBCode::convert (raw HTML)"] = "";
-$a->strings["PageInfo::appendToBody => BBCode::convert"] = "";
-$a->strings["Source input (Diaspora format)"] = "Źródło wejściowe (format Diaspora)";
-$a->strings["Source input (Markdown)"] = "";
-$a->strings["Markdown::convert (raw HTML)"] = "Markdown::convert (raw HTML)";
-$a->strings["Markdown::convert"] = "Markdown::convert";
-$a->strings["Markdown::toBBCode"] = "Markdown::toBBCode";
-$a->strings["Raw HTML input"] = "Surowe wejście HTML";
-$a->strings["HTML Input"] = "Wejście HTML";
-$a->strings["HTML::toBBCode"] = "HTML::toBBCode";
-$a->strings["HTML::toBBCode => BBCode::convert"] = "HTML::toBBCode => BBCode::convert";
-$a->strings["HTML::toBBCode => BBCode::convert (raw HTML)"] = "HTML::toBBCode => BBCode::convert (raw HTML)";
-$a->strings["HTML::toBBCode => BBCode::toPlaintext"] = "";
-$a->strings["HTML::toMarkdown"] = "HTML::toMarkdown";
-$a->strings["HTML::toPlaintext"] = "HTML::toPlaintext";
-$a->strings["HTML::toPlaintext (compact)"] = "";
-$a->strings["Decoded post"] = "";
-$a->strings["Post array before expand entities"] = "";
-$a->strings["Post converted"] = "";
-$a->strings["Converted body"] = "";
-$a->strings["Twitter addon is absent from the addon/ folder."] = "";
-$a->strings["Source text"] = "Tekst źródłowy";
-$a->strings["BBCode"] = "BBCode";
-$a->strings["Diaspora"] = "Diaspora";
-$a->strings["Markdown"] = "Markdown";
-$a->strings["HTML"] = "HTML";
-$a->strings["Twitter Source"] = "";
-$a->strings["Only logged in users are permitted to perform a probing."] = "Tylko zalogowani użytkownicy mogą wykonywać sondowanie.";
-$a->strings["Formatted"] = "";
-$a->strings["Source"] = "";
-$a->strings["Activity"] = "";
-$a->strings["Object data"] = "";
-$a->strings["Result Item"] = "";
-$a->strings["Source activity"] = "";
-$a->strings["You must be logged in to use this module"] = "Musisz być zalogowany, aby korzystać z tego modułu";
-$a->strings["Source URL"] = "Źródłowy adres URL";
-$a->strings["Lookup address"] = "Wyszukaj adres";
-$a->strings["%s's timeline"] = "oś czasu %s";
-$a->strings["%s's posts"] = "wpisy %s";
-$a->strings["%s's comments"] = "komentarze %s";
-$a->strings["No contacts."] = "Brak kontaktów.";
-$a->strings["Follower (%s)"] = [
- 0 => "",
- 1 => "",
- 2 => "",
- 3 => "",
-];
-$a->strings["Following (%s)"] = [
- 0 => "",
- 1 => "",
- 2 => "",
- 3 => "",
-];
-$a->strings["Mutual friend (%s)"] = [
- 0 => "",
- 1 => "",
- 2 => "",
- 3 => "",
-];
-$a->strings["Contact (%s)"] = [
- 0 => "",
- 1 => "",
- 2 => "",
- 3 => "",
-];
-$a->strings["All contacts"] = "Wszystkie kontakty";
-$a->strings["Following"] = "Kolejny";
-$a->strings["Mutual friends"] = "Wspólni znajomi";
-$a->strings["You're currently viewing your profile as <b>%s</b> <a href=\"%s\" class=\"btn btn-sm pull-right\">Cancel</a>"] = "";
-$a->strings["Member since:"] = "Członek od:";
-$a->strings["j F, Y"] = "d M, R";
-$a->strings["j F"] = "d M";
-$a->strings["Birthday:"] = "Urodziny:";
-$a->strings["Age: "] = "Wiek: ";
-$a->strings["%d year old"] = [
- 0 => "",
- 1 => "",
- 2 => "",
- 3 => "",
-];
-$a->strings["XMPP:"] = "XMPP:";
-$a->strings["Homepage:"] = "Strona główna:";
-$a->strings["Forums:"] = "Fora:";
-$a->strings["View profile as:"] = "Wyświetl profil jako:";
-$a->strings["Edit profile"] = "Edytuj profil";
-$a->strings["View as"] = "";
-$a->strings["Only parent users can create additional accounts."] = "Tylko użytkownicy nadrzędni mogą tworzyć dodatkowe konta.";
-$a->strings["You may (optionally) fill in this form via OpenID by supplying your OpenID and clicking \"Register\"."] = "Możesz (opcjonalnie) wypełnić ten formularz za pośrednictwem OpenID, podając swój OpenID i klikając \"Register\".";
-$a->strings["If you are not familiar with OpenID, please leave that field blank and fill in the rest of the items."] = "Jeśli nie jesteś zaznajomiony z OpenID, zostaw to pole puste i uzupełnij resztę elementów.";
-$a->strings["Your OpenID (optional): "] = "Twój OpenID (opcjonalnie): ";
-$a->strings["Include your profile in member directory?"] = "Czy dołączyć twój profil do katalogu członków?";
-$a->strings["Note for the admin"] = "Uwaga dla administratora";
-$a->strings["Leave a message for the admin, why you want to join this node"] = "Pozostaw wiadomość dla administratora, dlaczego chcesz dołączyć do tego węzła";
-$a->strings["Membership on this site is by invitation only."] = "Członkostwo na tej stronie możliwe tylko dzięki zaproszeniu.";
-$a->strings["Your invitation code: "] = "Twój kod zaproszenia: ";
-$a->strings["Registration"] = "Rejestracja";
-$a->strings["Your Full Name (e.g. Joe Smith, real or real-looking): "] = "Twoje imię i nazwisko (np. Jan Kowalski, prawdziwe lub wyglądające na prawdziwe): ";
-$a->strings["Your Email Address: (Initial information will be send there, so this has to be an existing address.)"] = "Twój adres e-mail: (Informacje początkowe zostaną wysłane tam, więc musi to być istniejący adres).";
-$a->strings["Please repeat your e-mail address:"] = "Powtórz swój adres e-mail:";
-$a->strings["Leave empty for an auto generated password."] = "Pozostaw puste dla wygenerowanego automatycznie hasła.";
-$a->strings["Choose a profile nickname. This must begin with a text character. Your profile address on this site will then be \"<strong>nickname@%s</strong>\"."] = "Wybierz pseudonim profilu. Musi zaczynać się od znaku tekstowego. Twój adres profilu na tej stronie to \"<strong>nickname@%s</strong>\".";
-$a->strings["Choose a nickname: "] = "Wybierz pseudonim: ";
-$a->strings["Import your profile to this friendica instance"] = "Zaimportuj swój profil do tej instancji friendica";
-$a->strings["Terms of Service"] = "Warunki usługi";
-$a->strings["Note: This node explicitly contains adult content"] = "Uwaga: Ten węzeł jawnie zawiera treści dla dorosłych";
-$a->strings["Parent Password:"] = "Hasło nadrzędne:";
-$a->strings["Please enter the password of the parent account to legitimize your request."] = "Wprowadź hasło konta nadrzędnego, aby legalizować swoje żądanie.";
-$a->strings["Password doesn't match."] = "Hasło nie jest zgodne.";
-$a->strings["Please enter your password."] = "Wprowadź hasło.";
-$a->strings["You have entered too much information."] = "Podałeś za dużo informacji.";
-$a->strings["Please enter the identical mail address in the second field."] = "Wpisz identyczny adres e-mail w drugim polu.";
-$a->strings["The additional account was created."] = "Dodatkowe konto zostało utworzone.";
-$a->strings["Registration successful. Please check your email for further instructions."] = "Rejestracja zakończona pomyślnie. Dalsze instrukcje zostały wysłane na twojego e-maila.";
-$a->strings["Failed to send email message. Here your accout details:<br> login: %s<br> password: %s<br><br>You can change your password after login."] = "Nie udało się wysłać wiadomości e-mail. Tutaj szczegóły twojego konta:<br> login: %s<br>hasło: %s<br><br>Możesz zmienić swoje hasło po zalogowaniu.";
-$a->strings["Registration successful."] = "Rejestracja udana.";
-$a->strings["Your registration can not be processed."] = "Nie można przetworzyć Twojej rejestracji.";
-$a->strings["You have to leave a request note for the admin."] = "Musisz zostawić notatkę z prośbą do administratora.";
-$a->strings["Your registration is pending approval by the site owner."] = "Twoja rejestracja oczekuje na zaakceptowanie przez właściciela witryny.";
-$a->strings["Bad Request"] = "Nieprawidłowe żądanie";
-$a->strings["Unauthorized"] = "Nieautoryzowane";
-$a->strings["Forbidden"] = "Zabronione";
-$a->strings["Not Found"] = "Nie znaleziono";
-$a->strings["Internal Server Error"] = "Wewnętrzny błąd serwera";
-$a->strings["Service Unavailable"] = "Usługa Niedostępna ";
-$a->strings["The server cannot or will not process the request due to an apparent client error."] = "Serwer nie może lub nie będzie przetwarzać żądania z powodu widocznego błędu klienta.";
-$a->strings["Authentication is required and has failed or has not yet been provided."] = "Uwierzytelnienie jest wymagane i nie powiodło się lub nie zostało jeszcze dostarczone.";
-$a->strings["The request was valid, but the server is refusing action. The user might not have the necessary permissions for a resource, or may need an account."] = "Żądanie było ważne, ale serwer odmawia działania. Użytkownik może nie mieć wymaganych uprawnień do zasobu lub może potrzebować konta.";
-$a->strings["The requested resource could not be found but may be available in the future."] = "Żądany zasób nie został znaleziony, ale może być dostępny w przyszłości.";
-$a->strings["An unexpected condition was encountered and no more specific message is suitable."] = "Napotkano nieoczekiwany warunek i nie jest odpowiedni żaden bardziej szczegółowy komunikat.";
-$a->strings["The server is currently unavailable (because it is overloaded or down for maintenance). Please try again later."] = "Serwer jest obecnie niedostępny (ponieważ jest przeciążony lub wyłączony z powodu konserwacji). Spróbuj ponownie później.";
-$a->strings["Go back"] = "Wróć";
-$a->strings["Welcome to %s"] = "Witamy w %s";
-$a->strings["No friends to display."] = "Brak znajomych do wyświetlenia.";
-$a->strings["Suggested contact not found."] = "Nie znaleziono sugerowanego kontaktu.";
-$a->strings["Friend suggestion sent."] = "Wysłana propozycja dodania do znajomych.";
-$a->strings["Suggest Friends"] = "Zaproponuj znajomych";
-$a->strings["Suggest a friend for %s"] = "Zaproponuj znajomych dla %s";
-$a->strings["Credits"] = "Zaufany";
-$a->strings["Friendica is a community project, that would not be possible without the help of many people. Here is a list of those who have contributed to the code or the translation of Friendica. Thank you all!"] = "Friendica to projekt społecznościowy, który nie byłby możliwy bez pomocy wielu osób. Oto lista osób, które przyczyniły się do tworzenia kodu lub tłumaczenia Friendica. Dziękuję wam wszystkim!";
-$a->strings["Friendica Communications Server - Setup"] = "Friendica Communications Server - Instalator";
-$a->strings["System check"] = "Sprawdzanie systemu";
-$a->strings["Check again"] = "Sprawdź ponownie";
-$a->strings["No SSL policy, links will track page SSL state"] = "Brak SSL, linki będą śledzić stan SSL";
-$a->strings["Force all links to use SSL"] = "Wymuś używanie SSL na wszystkich odnośnikach";
-$a->strings["Self-signed certificate, use SSL for local links only (discouraged)"] = "Wewnętrzne Certyfikaty, użyj SSL tylko dla linków lokalnych . ";
-$a->strings["Base settings"] = "Ustawienia bazy";
-$a->strings["SSL link policy"] = "Polityka odnośników SSL";
-$a->strings["Determines whether generated links should be forced to use SSL"] = "Określa, czy generowane odnośniki będą obowiązkowo używały SSL";
-$a->strings["Host name"] = "Nazwa hosta";
-$a->strings["Overwrite this field in case the determinated hostname isn't right, otherweise leave it as is."] = "Nadpisz to pole w przypadku, gdy określona nazwa hosta nie jest prawidłowa, a pozostałe pozostaw to bez zmian.";
-$a->strings["Base path to installation"] = "Podstawowa ścieżka do instalacji";
-$a->strings["If the system cannot detect the correct path to your installation, enter the correct path here. This setting should only be set if you are using a restricted system and symbolic links to your webroot."] = "Jeśli system nie może wykryć poprawnej ścieżki do instalacji, wprowadź tutaj poprawną ścieżkę. To ustawienie powinno być ustawione tylko wtedy, gdy używasz ograniczonego systemu i dowiązań symbolicznych do twojego webroota.";
-$a->strings["Sub path of the URL"] = "Ścieżka podrzędna adresu URL";
-$a->strings["Overwrite this field in case the sub path determination isn't right, otherwise leave it as is. Leaving this field blank means the installation is at the base URL without sub path."] = "Nadpisz to pole w przypadku, gdy określenie ścieżki podrzędnej nie jest prawidłowe, w przeciwnym razie pozostaw je bez zmian. Pozostawienie tego pola pustego oznacza, że instalacja odbywa się pod podstawowym adresem URL bez podścieżki.";
-$a->strings["Database connection"] = "Połączenie z bazą danych";
-$a->strings["In order to install Friendica we need to know how to connect to your database."] = "W celu zainstalowania Friendica musimy wiedzieć jak połączyć się z twoją bazą danych.";
-$a->strings["Please contact your hosting provider or site administrator if you have questions about these settings."] = "Proszę skontaktuj się ze swoim dostawcą usług hostingowych bądź administratorem strony jeśli masz pytania co do tych ustawień .";
-$a->strings["The database you specify below should already exist. If it does not, please create it before continuing."] = "Wymieniona przez Ciebie baza danych powinna już istnieć. Jeżeli nie, utwórz ją przed kontynuacją.";
-$a->strings["Database Server Name"] = "Nazwa serwera bazy danych";
-$a->strings["Database Login Name"] = "Nazwa użytkownika bazy danych";
-$a->strings["Database Login Password"] = "Hasło logowania do bazy danych";
-$a->strings["For security reasons the password must not be empty"] = "Ze względów bezpieczeństwa hasło nie może być puste";
-$a->strings["Database Name"] = "Nazwa bazy danych";
-$a->strings["Please select a default timezone for your website"] = "Proszę wybrać domyślną strefę czasową dla swojej strony";
-$a->strings["Site settings"] = "Ustawienia strony";
-$a->strings["Site administrator email address"] = "Adres e-mail administratora strony";
-$a->strings["Your account email address must match this in order to use the web admin panel."] = "Adres e-mail konta musi pasować do tego, aby móc korzystać z panelu administracyjnego.";
-$a->strings["System Language:"] = "Język systemu:";
-$a->strings["Set the default language for your Friendica installation interface and to send emails."] = "Ustaw domyślny język dla interfejsu instalacyjnego Friendica i wysyłaj e-maile.";
-$a->strings["Your Friendica site database has been installed."] = "Twoja baza danych witryny Friendica została zainstalowana.";
-$a->strings["Installation finished"] = "Instalacja zakończona";
-$a->strings["<h1>What next</h1>"] = "<h1>Co dalej</h1>";
-$a->strings["IMPORTANT: You will need to [manually] setup a scheduled task for the worker."] = "WAŻNE: Będziesz musiał [ręcznie] ustawić zaplanowane zadanie dla pracownika.";
-$a->strings["Go to your new Friendica node <a href=\"%s/register\">registration page</a> and register as new user. Remember to use the same email you have entered as administrator email. This will allow you to enter the site admin panel."] = "Przejdź do <a href=\"%s/register\">strony rejestracji</a> nowego węzła Friendica i zarejestruj się jako nowy użytkownik. Pamiętaj, aby użyć adresu e-mail wprowadzonego jako e-mail administratora. To pozwoli Ci wejść do panelu administratora witryny.";
-$a->strings["- select -"] = "- wybierz -";
-$a->strings["Item was not removed"] = "";
-$a->strings["Item was not deleted"] = "";
-$a->strings["Wrong type \"%s\", expected one of: %s"] = "";
-$a->strings["Model not found"] = "";
-$a->strings["Remote privacy information not available."] = "Nie są dostępne zdalne informacje o prywatności.";
-$a->strings["Visible to:"] = "Widoczne dla:";
-$a->strings["Manage Identities and/or Pages"] = "Zarządzaj tożsamościami i/lub stronami";
-$a->strings["Toggle between different identities or community/group pages which share your account details or which you have been granted \"manage\" permissions"] = "Przełącz między różnymi tożsamościami lub stronami społeczność/grupy, które udostępniają dane Twojego konta lub które otrzymałeś uprawnienia \"zarządzaj\"";
-$a->strings["Select an identity to manage: "] = "Wybierz tożsamość do zarządzania: ";
-$a->strings["Local Community"] = "Lokalna społeczność";
-$a->strings["Posts from local users on this server"] = "Wpisy od lokalnych użytkowników na tym serwerze";
-$a->strings["Global Community"] = "Globalna społeczność";
-$a->strings["Posts from users of the whole federated network"] = "Wpisy od użytkowników całej sieci stowarzyszonej";
-$a->strings["No results."] = "Brak wyników.";
-$a->strings["This community stream shows all public posts received by this node. They may not reflect the opinions of this node’s users."] = "Ten strumień społeczności pokazuje wszystkie publiczne posty otrzymane przez ten węzeł. Mogą nie odzwierciedlać opinii użytkowników tego węzła.";
-$a->strings["Community option not available."] = "Opcja wspólnotowa jest niedostępna.";
-$a->strings["Not available."] = "Niedostępne.";
-$a->strings["Welcome to Friendica"] = "Witamy na Friendica";
-$a->strings["New Member Checklist"] = "Lista nowych członków";
-$a->strings["We would like to offer some tips and links to help make your experience enjoyable. Click any item to visit the relevant page. A link to this page will be visible from your home page for two weeks after your initial registration and then will quietly disappear."] = "Chcielibyśmy zaproponować kilka porad i linków, które pomogą uczynić twoje doświadczenie przyjemnym. Kliknij dowolny element, aby odwiedzić odpowiednią stronę. Link do tej strony będzie widoczny na stronie głównej przez dwa tygodnie od czasu rejestracji, a następnie zniknie.";
-$a->strings["Getting Started"] = "Pierwsze kroki";
-$a->strings["Friendica Walk-Through"] = "Friendica Przejdź-Przez";
-$a->strings["On your <em>Quick Start</em> page - find a brief introduction to your profile and network tabs, make some new connections, and find some groups to join."] = "Na stronie <em>Szybki start</em> - znajdź krótkie wprowadzenie do swojego profilu i kart sieciowych, stwórz nowe połączenia i znajdź kilka grup do przyłączenia się.";
-$a->strings["Go to Your Settings"] = "Idź do swoich ustawień";
-$a->strings["On your <em>Settings</em> page - change your initial password. Also make a note of your Identity Address. This looks just like an email address - and will be useful in making friends on the free social web."] = "Na stronie Ustawienia - zmień swoje początkowe hasło. Zanotuj także swój adres tożsamości. Wygląda to jak adres e-mail - będzie przydatny w nawiązywaniu znajomości w bezpłatnej sieci społecznościowej.";
-$a->strings["Review the other settings, particularly the privacy settings. An unpublished directory listing is like having an unlisted phone number. In general, you should probably publish your listing - unless all of your friends and potential friends know exactly how to find you."] = "Przejrzyj pozostałe ustawienia, w szczególności ustawienia prywatności. Niepublikowany wykaz katalogów jest podobny do niepublicznego numeru telefonu. Ogólnie rzecz biorąc, powinieneś opublikować swój wpis - chyba, że wszyscy twoi znajomi i potencjalni znajomi dokładnie wiedzą, jak Cię znaleźć.";
-$a->strings["Upload Profile Photo"] = "Wyślij zdjęcie profilowe";
-$a->strings["Upload a profile photo if you have not done so already. Studies have shown that people with real photos of themselves are ten times more likely to make friends than people who do not."] = "Dodaj swoje zdjęcie profilowe jeśli jeszcze tego nie zrobiłeś. Twoje szanse na zwiększenie liczby znajomych rosną dziesięciokrotnie, kiedy na tym zdjęciu jesteś ty.";
-$a->strings["Edit Your Profile"] = "Edytuj własny profil";
-$a->strings["Edit your <strong>default</strong> profile to your liking. Review the settings for hiding your list of friends and hiding the profile from unknown visitors."] = "Edytuj swój domyślny profil do swoich potrzeb. Przejrzyj ustawienia ukrywania listy znajomych i ukrywania profilu przed nieznanymi użytkownikami.";
-$a->strings["Profile Keywords"] = "Słowa kluczowe profilu";
-$a->strings["Set some public keywords for your profile which describe your interests. We may be able to find other people with similar interests and suggest friendships."] = "Ustaw kilka publicznych słów kluczowych dla swojego profilu, które opisują Twoje zainteresowania. Możemy znaleźć inne osoby o podobnych zainteresowaniach i zasugerować przyjaźnie.";
-$a->strings["Connecting"] = "Łączenie";
-$a->strings["Importing Emails"] = "Importowanie e-maili";
-$a->strings["Enter your email access information on your Connector Settings page if you wish to import and interact with friends or mailing lists from your email INBOX"] = "Wprowadź informacje dotyczące dostępu do poczty e-mail na stronie Ustawienia oprogramowania, jeśli chcesz importować i wchodzić w interakcje z przyjaciółmi lub listami adresowymi z poziomu konta e-mail INBOX";
-$a->strings["Go to Your Contacts Page"] = "Idź do strony z Twoimi kontaktami";
-$a->strings["Your Contacts page is your gateway to managing friendships and connecting with friends on other networks. Typically you enter their address or site URL in the <em>Add New Contact</em> dialog."] = "Strona Kontakty jest twoją bramą do zarządzania przyjaciółmi i łączenia się z przyjaciółmi w innych sieciach. Zazwyczaj podaje się adres lub adres URL strony w oknie dialogowym <em>Dodaj nowy kontakt</em>.";
-$a->strings["Go to Your Site's Directory"] = "Idż do twojej strony";
-$a->strings["The Directory page lets you find other people in this network or other federated sites. Look for a <em>Connect</em> or <em>Follow</em> link on their profile page. Provide your own Identity Address if requested."] = "Strona Katalog umożliwia znalezienie innych osób w tej sieci lub innych witrynach stowarzyszonych. Poszukaj łącza <em>Połącz</em> lub <em>Śledź</em> na stronie profilu. Jeśli chcesz, podaj swój własny adres tożsamości.";
-$a->strings["Finding New People"] = "Znajdowanie nowych osób";
-$a->strings["On the side panel of the Contacts page are several tools to find new friends. We can match people by interest, look up people by name or interest, and provide suggestions based on network relationships. On a brand new site, friend suggestions will usually begin to be populated within 24 hours."] = "Na bocznym panelu strony Kontaktów znajduje się kilka narzędzi do znajdowania nowych przyjaciół. Możemy dopasować osoby według zainteresowań, wyszukiwać osoby według nazwisk i zainteresowań oraz dostarczać sugestie oparte na relacjach sieciowych. Na zupełnie nowej stronie sugestie znajomych zwykle zaczynają być wypełniane w ciągu 24 godzin";
-$a->strings["Groups"] = "Grupy";
-$a->strings["Group Your Contacts"] = "Grupy kontaktów";
-$a->strings["Once you have made some friends, organize them into private conversation groups from the sidebar of your Contacts page and then you can interact with each group privately on your Network page."] = "Gdy zaprzyjaźnisz się z przyjaciółmi, uporządkuj je w prywatne grupy konwersacji na pasku bocznym na stronie Kontakty, a następnie możesz wchodzić w interakcje z każdą grupą prywatnie na stronie Sieć.";
-$a->strings["Why Aren't My Posts Public?"] = "Dlaczego moje posty nie są publiczne?";
-$a->strings["Friendica respects your privacy. By default, your posts will only show up to people you've added as friends. For more information, see the help section from the link above."] = "Friendica szanuje Twoją prywatność. Domyślnie Twoje wpisy będą wyświetlane tylko osobom, które dodałeś jako znajomi. Aby uzyskać więcej informacji, zobacz sekcję pomocy na powyższym łączu.";
-$a->strings["Getting Help"] = "Otrzymaj pomoc";
-$a->strings["Go to the Help Section"] = "Przejdź do sekcji pomocy";
-$a->strings["Our <strong>help</strong> pages may be consulted for detail on other program features and resources."] = "Na naszych stronach <strong>pomocy</strong> można znaleźć szczegółowe informacje na temat innych funkcji programu i zasobów.";
-$a->strings["This page is missing a url parameter."] = "Na tej stronie brakuje parametru url.";
-$a->strings["The post was created"] = "Post został utworzony";
-$a->strings["Submanaged account can't access the administation pages. Please log back in as the main account."] = "";
-$a->strings["Information"] = "Informacje";
-$a->strings["Overview"] = "Przegląd";
-$a->strings["Federation Statistics"] = "Statystyki Organizacji";
-$a->strings["Configuration"] = "Konfiguracja";
-$a->strings["Site"] = "Strona";
-$a->strings["Users"] = "Użytkownicy";
-$a->strings["Addons"] = "Dodatki";
-$a->strings["Themes"] = "Wygląd";
-$a->strings["Additional features"] = "Dodatkowe funkcje";
-$a->strings["Database"] = "Baza danych";
-$a->strings["DB updates"] = "Aktualizacje DB";
-$a->strings["Inspect Deferred Workers"] = "Sprawdź Odroczonych Pracowników";
-$a->strings["Inspect worker Queue"] = "Sprawdź kolejkę pracowników";
-$a->strings["Tools"] = "Narzędzia";
-$a->strings["Contact Blocklist"] = "Lista zablokowanych kontaktów";
-$a->strings["Server Blocklist"] = "Lista zablokowanych serwerów";
-$a->strings["Delete Item"] = "Usuń przedmiot";
-$a->strings["Logs"] = "Logi";
-$a->strings["View Logs"] = "Zobacz rejestry";
-$a->strings["Diagnostics"] = "Diagnostyka";
-$a->strings["PHP Info"] = "Informacje o PHP";
-$a->strings["probe address"] = "adres sondy";
-$a->strings["check webfinger"] = "sprawdź webfinger";
-$a->strings["Item Source"] = "Źródło elementu";
-$a->strings["Babel"] = "";
-$a->strings["ActivityPub Conversion"] = "";
-$a->strings["Admin"] = "Administator";
-$a->strings["Addon Features"] = "Funkcje dodatkowe";
-$a->strings["User registrations waiting for confirmation"] = "Rejestracje użytkowników czekające na potwierdzenie";
-$a->strings["%d contact edited."] = [
- 0 => "Zedytowano %d kontakt.",
- 1 => "Zedytowano %d kontakty.",
- 2 => "Zedytowano %d kontaktów.",
- 3 => "%dedytuj kontakty.",