-// sunpos.c (taken from XEarth)
+// sunpos.cxx (adapted from XEarth)
// kirk johnson
// july 1993
//
# include <config.h>
#endif
-#include <math.h>
-#include <stdio.h>
-#include <time.h>
+#include <Include/compiler.h>
-//#include <Astro/orbits.hxx>
+#ifdef FG_HAVE_STD_INCLUDES
+# include <cmath>
+# include <cstdio>
+# include <ctime>
+#else
+# include <math.h>
+# include <stdio.h>
+# include <time.h>
+#endif
+
+#include <Debug/logstream.hxx>
#include <Astro/solarsystem.hxx>
#include <Include/fg_constants.h>
#include <Main/views.hxx>
-#include <Math/fg_geodesy.h>
+#include <Math/fg_geodesy.hxx>
#include <Math/mat3.h>
#include <Math/point3d.hxx>
#include <Math/polar3d.hxx>
extern SolarSystem *solarSystem;
#undef E
-
-
-/*
- * the epoch upon which these astronomical calculations are based is
- * 1990 january 0.0, 631065600 seconds since the beginning of the
- * "unix epoch" (00:00:00 GMT, Jan. 1, 1970)
- *
- * given a number of seconds since the start of the unix epoch,
- * DaysSinceEpoch() computes the number of days since the start of the
- * astronomical epoch (1990 january 0.0)
- */
-
-#define EpochStart (631065600)
-#define DaysSinceEpoch(secs) (((secs)-EpochStart)*(1.0/(24*3600)))
-
-/*
- * assuming the apparent orbit of the sun about the earth is circular,
- * the rate at which the orbit progresses is given by RadsPerDay --
- * FG_2PI radians per orbit divided by 365.242191 days per year:
- */
-
-#define RadsPerDay (FG_2PI/365.242191)
-
-/*
- * details of sun's apparent orbit at epoch 1990.0 (after
- * duffett-smith, table 6, section 46)
- *
- * Epsilon_g (ecliptic longitude at epoch 1990.0) 279.403303 degrees
- * OmegaBar_g (ecliptic longitude of perigee) 282.768422 degrees
- * Eccentricity (eccentricity of orbit) 0.016713
- */
-
-#define Epsilon_g (279.403303*(FG_2PI/360))
-#define OmegaBar_g (282.768422*(FG_2PI/360))
-#define Eccentricity (0.016713)
-
-/*
- * MeanObliquity gives the mean obliquity of the earth's axis at epoch
- * 1990.0 (computed as 23.440592 degrees according to the method given
- * in duffett-smith, section 27)
- */
#define MeanObliquity (23.440592*(FG_2PI/360))
-/* static double solve_keplers_equation(double); */
-/* static double sun_ecliptic_longitude(time_t); */
static void ecliptic_to_equatorial(double, double, double *, double *);
static double julian_date(int, int, int);
static double GST(time_t);
-/*
- * solve Kepler's equation via Newton's method
- * (after duffett-smith, section 47)
- */
-/*
-static double solve_keplers_equation(double M) {
- double E;
- double delta;
-
- E = M;
- while (1) {
- delta = E - Eccentricity*sin(E) - M;
- if (fabs(delta) <= 1e-10) break;
- E -= delta / (1 - Eccentricity*cos(E));
- }
-
- return E;
-}
-*/
-
-
-/* compute ecliptic longitude of sun (in radians) (after
- * duffett-smith, section 47) */
-/*
-static double sun_ecliptic_longitude(time_t ssue) {
- // time_t ssue; // seconds since unix epoch
- double D, N;
- double M_sun, E;
- double v;
-
- D = DaysSinceEpoch(ssue);
-
- N = RadsPerDay * D;
- N = fmod(N, FG_2PI);
- if (N < 0) N += FG_2PI;
-
- M_sun = N + Epsilon_g - OmegaBar_g;
- if (M_sun < 0) M_sun += FG_2PI;
-
- E = solve_keplers_equation(M_sun);
- v = 2 * atan(sqrt((1+Eccentricity)/(1-Eccentricity)) * tan(E/2));
-
- return (v + OmegaBar_g);
-}
-*/
-
-
-/* convert from ecliptic to equatorial coordinates (after
- * duffett-smith, section 27) */
-
static void ecliptic_to_equatorial(double lambda, double beta,
double *alpha, double *delta) {
/* double lambda; ecliptic longitude */
/* lazy test to ensure gregorian calendar */
if (y < 1583) {
- printf("WHOOPS! Julian dates only valid for 1582 oct 15 or later\n");
+ FG_LOG( FG_EVENT, FG_ALERT,
+ "WHOOPS! Julian dates only valid for 1582 oct 15 or later" );
}
if ((m == 1) || (m == 2)) {
/* ecliptic_to_equatorial(lambda, 0.0, &alpha, &delta); */
//ecliptic_to_equatorial (solarPosition.lonSun, 0.0, &alpha, &delta);
ecliptic_to_equatorial( SolarSystem::theSolarSystem->getSun()->getLon(),
- 0.0, &alpha, &delta );
+ SolarSystem::theSolarSystem->getSun()->getLat(),
+ &alpha, &delta );
// tmp = alpha - (FG_2PI/24)*GST(ssue);
tmp = alpha - (FG_2PI/24)*gst;
void fgUpdateSunPos( void ) {
fgLIGHT *l;
fgTIME *t;
- fgVIEW *v;
- MAT3vec nup, nsun, v0;
+ FGView *v;
+ MAT3vec nup, nsun, v0, surface_to_sun;
Point3D p, rel_sunpos;
double dot, east_dot;
double sun_gd_lat, sl_radius;
t = &cur_time_params;
v = ¤t_view;
- printf(" Updating Sun position\n");
+ FG_LOG( FG_EVENT, FG_INFO, " Updating Sun position" );
// (not sure why there was two)
// fgSunPosition(t->cur_time, &l->sun_lon, &sun_gd_lat);
fgGeodToGeoc(sun_gd_lat, 0.0, &sl_radius, &l->sun_gc_lat);
- p.setvals( l->sun_lon, l->sun_gc_lat, sl_radius );
+ p = Point3D( l->sun_lon, l->sun_gc_lat, sl_radius );
l->fg_sunpos = fgPolarToCart3d(p);
- printf( " t->cur_time = %ld\n", t->cur_time);
- printf( " Sun Geodetic lat = %.5f Geocentric lat = %.5f\n",
- sun_gd_lat, l->sun_gc_lat);
+ FG_LOG( FG_EVENT, FG_INFO, " t->cur_time = " << t->cur_time );
+ FG_LOG( FG_EVENT, FG_INFO,
+ " Sun Geodetic lat = " << sun_gd_lat
+ << " Geocentric lat = " << l->sun_gc_lat );
// I think this will work better for generating the sun light vector
l->sun_vec[0] = l->fg_sunpos.x();
// l->sun_vec[2]);
// calculate the sun's relative angle to local up
- MAT3_COPY_VEC(nup, v->local_up);
+ MAT3_COPY_VEC(nup, v->get_local_up());
nsun[0] = l->fg_sunpos.x();
nsun[1] = l->fg_sunpos.y();
nsun[2] = l->fg_sunpos.z();
// l->sun_angle);
// calculate vector to sun's position on the earth's surface
- rel_sunpos = l->fg_sunpos - (v->view_pos + scenery.center);
- v->to_sun[0] = rel_sunpos.x();
- v->to_sun[1] = rel_sunpos.y();
- v->to_sun[2] = rel_sunpos.z();
+ rel_sunpos = l->fg_sunpos - (v->get_view_pos() + scenery.center);
+ v->set_to_sun( rel_sunpos.x(), rel_sunpos.y(), rel_sunpos.z() );
// printf( "Vector to sun = %.2f %.2f %.2f\n",
// v->to_sun[0], v->to_sun[1], v->to_sun[2]);
// make a vector to the current view position
- MAT3_SET_VEC(v0, v->view_pos.x(), v->view_pos.y(), v->view_pos.z());
+ Point3D view_pos = v->get_view_pos();
+ MAT3_SET_VEC(v0, view_pos.x(), view_pos.y(), view_pos.z());
// Given a vector from the view position to the point on the
// earth's surface the sun is directly over, map into onto the
// local plane representing "horizontal".
- map_vec_onto_cur_surface_plane(v->local_up, v0, v->to_sun,
- v->surface_to_sun);
- MAT3_NORMALIZE_VEC(v->surface_to_sun, ntmp);
+ map_vec_onto_cur_surface_plane( v->get_local_up(), v0, v->get_to_sun(),
+ surface_to_sun );
+ MAT3_NORMALIZE_VEC(surface_to_sun, ntmp);
+ v->set_surface_to_sun( surface_to_sun[0], surface_to_sun[1],
+ surface_to_sun[2] );
// printf("Surface direction to sun is %.2f %.2f %.2f\n",
// v->surface_to_sun[0], v->surface_to_sun[1], v->surface_to_sun[2]);
// printf("Should be close to zero = %.2f\n",
// calculate the angle between v->surface_to_sun and
// v->surface_east. We do this so we can sort out the acos()
// ambiguity. I wish I could think of a more efficient way ... :-(
- east_dot = MAT3_DOT_PRODUCT(v->surface_to_sun, v->surface_east);
+ east_dot = MAT3_DOT_PRODUCT( surface_to_sun, v->get_surface_east() );
// printf(" East dot product = %.2f\n", east_dot);
// calculate the angle between v->surface_to_sun and
// v->surface_south. this is how much we have to rotate the sky
// for it to align with the sun
- dot = MAT3_DOT_PRODUCT(v->surface_to_sun, v->surface_south);
+ dot = MAT3_DOT_PRODUCT( surface_to_sun, v->get_surface_south() );
// printf(" Dot product = %.2f\n", dot);
if ( east_dot >= 0 ) {
l->sun_rotation = acos(dot);
// $Log$
+// Revision 1.21 1999/03/22 02:08:18 curt
+// Changes contributed by Durk Talsma:
+//
+// Here's a few changes I made to fg-0.58 this weekend. Included are the
+// following features:
+// - Sun and moon have a halo
+// - The moon has a light vector, moon_angle, etc. etc. so that we can have
+// some moonlight during the night.
+// - Lot's of small changes tweakes, including some stuff Norman Vine sent
+// me earlier.
+//
+// Revision 1.20 1999/02/26 22:10:11 curt
+// Added initial support for native SGI compilers.
+//
+// Revision 1.19 1999/01/07 20:25:37 curt
+// Portability changes and updates from Bernie Bright.
+//
+// Revision 1.18 1998/12/09 18:50:36 curt
+// Converted "class fgVIEW" to "class FGView" and updated to make data
+// members private and make required accessor functions.
+//
+// Revision 1.17 1998/11/09 23:41:53 curt
+// Log message clean ups.
+//
+// Revision 1.16 1998/11/07 19:07:14 curt
+// Enable release builds using the --without-logging option to the configure
+// script. Also a couple log message cleanups, plus some C to C++ comment
+// conversion.
+//
+// Revision 1.15 1998/10/18 01:17:24 curt
+// Point3D tweaks.
+//
+// Revision 1.14 1998/10/17 01:34:32 curt
+// C++ ifying ...
+//
// Revision 1.13 1998/10/16 00:56:12 curt
// Converted to Point3D class.
//