<?php
/************************************************************************
- * MXChange v0.2.1 Start: 08/25/2003 *
- * =============== Last change: 11/29/2005 *
+ * Mailer v0.2.1-FINAL Start: 08/25/2003 *
+ * =================== Last change: 11/29/2005 *
* *
* -------------------------------------------------------------------- *
* File : functions.php *
* Needs to be in all Files and every File needs "svn propset *
* svn:keywords Date Revision" (autoprobset!) at least!!!!!! *
* -------------------------------------------------------------------- *
- * Copyright (c) 2003 - 2008 by Roland Haeder *
+ * Copyright (c) 2003 - 2009 by Roland Haeder *
+ * Copyright (c) 2009, 2010 by Mailer Developer Team *
* For more information visit: http://www.mxchange.org *
* *
* This program is free software; you can redistribute it and/or modify *
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *
* MA 02110-1301 USA *
************************************************************************/
+
// Some security stuff...
if (!defined('__SECURITY')) {
- $INC = substr(dirname(__FILE__), 0, strpos(dirname(__FILE__), '/inc') + 4) . '/security.php';
- require($INC);
-}
-
-// Output HTML code directly or 'render' it. You addionally switch the new-line character off
-function OUTPUT_HTML ($HTML, $newLine = true) {
- // Some global variables
- global $OUTPUT;
-
- // Do we have HTML-Code here?
- if (!empty($HTML)) {
- // Yes, so we handle it as you have configured
- switch (getConfig('OUTPUT_MODE'))
- {
- case 'render':
- // That's why you don't need any \n at the end of your HTML code... :-)
- if (constant('_OB_CACHING') == 'on') {
- // Output into PHP's internal buffer
- outputRawCode($HTML);
-
- // That's why you don't need any \n at the end of your HTML code... :-)
- if ($newLine) echo "\n";
- } else {
- // Render mode for old or lame servers...
- $OUTPUT .= $HTML;
-
- // That's why you don't need any \n at the end of your HTML code... :-)
- if ($newLine) $OUTPUT .= "\n";
- }
- break;
-
- case 'direct':
- // If we are switching from render to direct output rendered code
- if ((!empty($OUTPUT)) && (constant('_OB_CACHING') != 'on')) { outputRawCode($OUTPUT); $OUTPUT = ''; }
-
- // The same as above... ^
- outputRawCode($HTML);
- if ($newLine) echo "\n";
- break;
-
- default:
- // Huh, something goes wrong or maybe you have edited config.php ???
- app_die(__FUNCTION__, __LINE__, "<strong>{--FATAL_ERROR--}:</strong> {--LANG_NO_RENDER_DIRECT--}");
- break;
- }
- } elseif ((constant('_OB_CACHING') == 'on') && (isset($GLOBALS['footer_sent'])) && ($GLOBALS['footer_sent'] == 1)) {
- // Headers already sent?
- if (headers_sent()) {
- // Log this error
- DEBUG_LOG(__FUNCTION__, __LINE__, "Headers already sent! We need debug backtrace here.");
-
- // Trigger an user error
- debug_report_bug("Headers are already sent!");
- } // END - if
-
- // Output cached HTML code
- $OUTPUT = ob_get_contents();
-
- // Clear output buffer for later output if output is found
- if (!empty($OUTPUT)) {
- clearOutputBuffer();
- } // END - if
-
- // Send HTTP header
- sendHeader('HTTP/1.1 200');
-
- // Used later
- $now = gmdate('D, d M Y H:i:s') . ' GMT';
-
- // General headers for no caching
- sendHeader('Expired: ' . $now); // RFC2616 - Section 14.21
- sendHeader('Last-Modified: ' . $now);
- sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
- sendHeader('Pragma: no-cache'); // HTTP/1.0
- sendHeader('Connection: Close');
-
- // Extension 'rewrite' installed?
- if ((EXT_IS_ACTIVE('rewrite')) && (getOutputMode() != '1') && (getOutputMode() != '-1')) {
- $OUTPUT = rewriteLinksInCode($OUTPUT);
- } // END - if
-
- // Compile and run finished rendered HTML code
- while (strpos($OUTPUT, '{!') > 0) {
- // Replace _MYSQL_PREFIX
- $OUTPUT = str_replace("{!_MYSQL_PREFIX!}", getConfig('_MYSQL_PREFIX'), $OUTPUT);
-
- // Prepare the content and eval() it...
- $newContent = '';
- $eval = "\$newContent = \"".COMPILE_CODE(smartAddSlashes($OUTPUT))."\";";
- eval($eval);
-
- // Was that eval okay?
- if (empty($newContent)) {
- // Something went wrong!
- app_die(__FUNCTION__, __LINE__, 'Evaluation error:<pre>' . htmlentities($eval) . '</pre>');
- } // END - if
- $OUTPUT = $newContent;
- } // END - while
-
- // Output code here, DO NOT REMOVE! ;-)
- outputRawCode($OUTPUT);
- } elseif ((getConfig('OUTPUT_MODE') == 'render') && (!empty($OUTPUT))) {
- // Rewrite links when rewrite extension is active
- if ((EXT_IS_ACTIVE('rewrite')) && (getOutputMode() != '1') && (getOutputMode() != '-1')) {
- $OUTPUT = rewriteLinksInCode($OUTPUT);
- } // END - if
-
- // Compile and run finished rendered HTML code
- while (strpos($OUTPUT, '{!') > 0) {
- $eval = "\$OUTPUT = \"".COMPILE_CODE(smartAddSlashes($OUTPUT))."\";";
- eval($eval);
- } // END - while
+ die();
+} // END - if
- // Output code here, DO NOT REMOVE! ;-)
- outputRawCode($OUTPUT);
- }
-}
+// Sends out all headers required for HTTP/1.1 reply
+function sendHttpHeaders () {
+ // Used later
+ $now = gmdate('D, d M Y H:i:s') . ' GMT';
-// Output the raw HTML code
-function outputRawCode ($HTML) {
- // Output stripped HTML code to avoid broken JavaScript code, etc.
- echo stripslashes(stripslashes($HTML));
+ // Send HTTP header
+ sendHeader('HTTP/1.1 ' . getHttpStatus());
- // Flush the output if only constant('_OB_CACHING') is not 'on'
- if (constant('_OB_CACHING') != 'on') {
- // Flush it
- flush();
- } // END - if
+ // General headers for no caching
+ sendHeader('Expires: ' . $now); // RFC2616 - Section 14.21
+ sendHeader('Last-Modified: ' . $now);
+ sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
+ sendHeader('Pragma: no-cache'); // HTTP/1.0
+ sendHeader('Connection: Close');
+ sendHeader('Content-Type: ' . getContentType() . '; charset=UTF-8');
+ sendHeader('Content-Language: ' . getLanguage());
}
// Init fatal message array
}
// Add a fatal error message to the queue array
-function addFatalMessage ($F, $L, $message, $extra='') {
+function addFatalMessage ($F, $L, $message, $extra = '') {
if (is_array($extra)) {
// Multiple extras for a message with masks
$message = call_user_func_array('sprintf', $extra);
$GLOBALS['fatal_messages'][] = $message;
// Log fatal messages away
- DEBUG_LOG($F, $L, " message={$message}");
+ logDebugMessage($F, $L, 'Fatal error message: ' . $message);
}
// Getter for total fatal message count
function getTotalFatalErrors () {
- // Init coun
- $count = 0;
+ // Init count
+ $count = '0';
// Do we have at least the first entry?
if (!empty($GLOBALS['fatal_messages'][0])) {
return $count;
}
-// Load a template file and return it's content (only it's name; do not use ' or ")
-function LOAD_TEMPLATE ($template, $return=false, $content=array()) {
- // @TODO Remove this sanity-check if all is fine
- if (!is_bool($return)) debug_report_bug('return is not bool (' . gettype($return) . ')');
-
- // Add more variables which you want to use in your template files
- global $DATA, $username;
-
- // Get whole config array
- $_CONFIG = getConfigArray();
-
- // Make all template names lowercase
- $template = strtolower($template);
-
- // Count the template load
- incrementConfigEntry('num_templates');
-
- // Prepare IP number and User Agent
- $REMOTE_ADDR = detectRemoteAddr();
- if (!defined('REMOTE_ADDR')) define('REMOTE_ADDR', $REMOTE_ADDR);
- $HTTP_USER_AGENT = detectUserAgent();
-
- // Init some data
- $ret = '';
- if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = 0;
-
- // @DEPRECATED Try to rewrite the if() condition
- if ($template == 'member_support_form') {
- // Support request of a member
- $result = SQL_QUERY_ESC("SELECT userid, gender, surname, family, email FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1",
- array(getUserId()), __FUNCTION__, __LINE__);
-
- // Is content an array?
- if (is_array($content)) {
- // Merge data
- $content = merge_array($content, SQL_FETCHARRAY($result));
-
- // Translate gender
- $content['gender'] = translateGender($content['gender']);
- } else {
- // @DEPRECATED
- // @TODO Fine all templates which are using these direct variables and rewrite them.
- // @TODO After this step is done, this else-block is history
- list($gender, $surname, $family, $email) = SQL_FETCHROW($result);
-
- // Translate gender
- $gender = translateGender($gender);
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("DEPRECATION-WARNING: content is not array (%s).", gettype($content)));
- }
-
- // Free result
- SQL_FREERESULT($result);
- } // END - if
-
- // Generate date/time string
- $date_time = generateDateTime(time(), '1');
-
- // Base directory
- $basePath = sprintf("%stemplates/%s/html/", constant('PATH'), getLanguage());
- $mode = '';
-
- // Check for admin/guest/member templates
- if (strpos($template, 'admin_') > -1) {
- // Admin template found
- $mode = 'admin/';
- } elseif (strpos($template, 'guest_') > -1) {
- // Guest template found
- $mode = 'guest/';
- } elseif (strpos($template, 'member_') > -1) {
- // Member template found
- $mode = 'member/';
- } elseif (strpos($template, 'install_') > -1) {
- // Installation template found
- $mode = 'install/';
- } elseif (strpos($template, 'ext_') > -1) {
- // Extension template found
- $mode = 'ext/';
- } elseif (strpos($template, 'la_') > -1) {
- // 'Logical-area' template found
- $mode = 'la/';
- } elseif (strpos($template, 'js_') > -1) {
- // JavaScript template found
- $mode = 'js/';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
- if (EXT_IS_ACTIVE($test)) {
- // Set extra path to extension's name
- $mode = $test . '/';
- } // END - if
- }
-
- ////////////////////////
- // Generate file name //
- ////////////////////////
- $FQFN = $basePath . $mode . $template . '.tpl';
-
- if ((isWhatSet()) && ((strpos($template, '_header') > 0) || (strpos($template, '_footer') > 0)) && (($mode == 'guest/') || ($mode == 'member/') || ($mode == 'admin/'))) {
- // Select what depended header/footer template file for admin/guest/member area
- $file2 = sprintf("%s%s%s_%s.tpl",
- $basePath,
- $mode,
- $template,
- getWhat()
- );
-
- // Probe for it...
- if (isFileReadable($file2)) $FQFN = $file2;
-
- // Remove variable from memory
- unset($file2);
- } // END - if
-
- // Does the special template exists?
- if (!isFileReadable($FQFN)) {
- // Reset to default template
- $FQFN = $basePath . $template . '.tpl';
- } // END - if
-
- // Now does the final template exists?
- if (isFileReadable($FQFN)) {
- // The local file does exists so we load it. :)
- $tmpl_file = readFromFile($FQFN);
-
- // Replace ' to our own chars to preventing them being quoted
- while (strpos($tmpl_file, "'") !== false) { $tmpl_file = str_replace("'", '{QUOT}', $tmpl_file); }
-
- // Do we have to compile the code?
- $ret = '';
- if ((strpos($tmpl_file, "\$") !== false) || (strpos($tmpl_file, '{--') !== false) || (strpos($tmpl_file, '--}') > 0)) {
- // Okay, compile it!
- $tmpl_file = "\$ret=\"".COMPILE_CODE(smartAddSlashes($tmpl_file))."\";";
- eval($tmpl_file);
- } else {
- // Simply return loaded code
- $ret = $tmpl_file;
- }
-
- // Normal HTML output?
- if ($GLOBALS['output_mode'] == 0) {
- // Add surrounding HTML comments to help finding bugs faster
- $ret = "<!-- Template " . $template . " - Start -->\n" . $ret . "<!-- Template " . $template . " - End -->\n";
- } // END - if
- } elseif ((IS_ADMIN()) || ((isInstalling()) && (!isInstalled()))) {
- // Only admins shall see this warning or when installation mode is active
- $ret = "<br /><span class=\"guest_failed\">{--TEMPLATE_404--}</span><br />
-(".basename($FQFN).")<br />
-<br />
-{--TEMPLATE_CONTENT--}
-<pre>".print_r($content, true)."</pre>
-{--TEMPLATE_DATA--}
-<pre>".print_r($DATA, true)."</pre>
-<br /><br />";
- }
-
- // Remove content and data
- unset($content);
- unset($DATA);
-
- // Do we have some content to output or return?
- if (!empty($ret)) {
- // Not empty so let's put it out! ;)
- if ($return === true) {
- // Return the HTML code
- return $ret;
- } else {
- // Output direct
- OUTPUT_HTML($ret);
- }
- } elseif (isDebugModeEnabled()) {
- // Warning, empty output!
- return "E:" . $template."<br />\n";
- }
-}
-
// Send mail out to an email address
-function sendEmail ($toEmail, $subject, $message, $HTML = 'N', $mailHeader = '') {
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$toEmail},SUBJECT={$subject}<br />\n";
+function sendEmail ($toEmail, $subject, $message, $isHtml = 'N', $mailHeader = '') {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail},SUBJECT={$subject}<br />");
// Compile subject line (for POINTS constant etc.)
- $eval = "\$subject = decodeEntities(\"".COMPILE_CODE(smartAddSlashes($subject))."\");";
- eval($eval);
+ eval('$subject = decodeEntities("' . compileRawCode(escapeQuotes($subject)) . '");');
// Set from header
- if ((!eregi("@", $toEmail)) && ($toEmail > 0)) {
+ if ((!isInStringIgnoreCase('@', $toEmail)) && ($toEmail > 0)) {
// Value detected, is the message extension installed?
- if (EXT_IS_ACTIVE("msg")) {
- ADD_MESSAGE_TO_BOX($toEmail, $subject, $message, $HTML);
+ // @TODO Extension 'msg' does not exist
+ if (isExtensionActive('msg')) {
+ ADD_MESSAGE_TO_BOX($toEmail, $subject, $message, $isHtml);
return;
} else {
- // Load email address
- $result_email = SQL_QUERY_ESC("SELECT email FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1", array(bigintval($toEmail)), __FUNCTION__, __LINE__);
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):numRows=".SQL_NUMROWS($result_email)."<br />\n";
-
// Does the user exist?
- if (SQL_NUMROWS($result_email)) {
- // Load email address
- list($toEmail) = SQL_FETCHROW($result_email);
+ if (fetchUserData($toEmail)) {
+ // Get the email
+ $toEmail = getUserData('email');
} else {
// Set webmaster
- $toEmail = constant('WEBMASTER');
+ $toEmail = getConfig('WEBMASTER');
}
-
- // Free result
- SQL_FREERESULT($result_email);
}
} elseif ($toEmail == '0') {
// Is the webmaster!
- $toEmail = constant('WEBMASTER');
+ $toEmail = getConfig('WEBMASTER');
}
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$toEmail}<br />\n";
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail}<br />");
// Check for PHPMailer or debug-mode
- if (!checkPhpMailerUsage()) {
+ if ((!checkPhpMailerUsage()) || (isDebugModeEnabled())) {
// Not in PHPMailer-Mode
if (empty($mailHeader)) {
// Load email header template
- $mailHeader = LOAD_EMAIL_TEMPLATE('header');
- } else {
- // Append header
- $mailHeader .= LOAD_EMAIL_TEMPLATE('header');
- }
- } elseif (isDebugModeEnabled()) {
- if (empty($mailHeader)) {
- // Load email header template
- $mailHeader = LOAD_EMAIL_TEMPLATE('header');
+ $mailHeader = loadEmailTemplate('header');
} else {
// Append header
- $mailHeader .= LOAD_EMAIL_TEMPLATE('header');
+ $mailHeader .= loadEmailTemplate('header');
}
- }
-
- // Compile "TO"
- $eval = "\$toEmail = \"".COMPILE_CODE(smartAddSlashes($toEmail))."\";";
- eval($eval);
-
- // Compile "MSG"
- $eval = "\$message = \"".COMPILE_CODE(smartAddSlashes($message))."\";";
- eval($eval);
+ } // END - if
// Fix HTML parameter (default is no!)
- if (empty($HTML)) $HTML = 'N';
+ if (empty($isHtml)) $isHtml = 'N';
+
+ // Debug mode enabled?
if (isDebugModeEnabled()) {
// In debug mode we want to display the mail instead of sending it away so we can debug this part
- OUTPUT_HTML("<pre>
-".htmlentities(trim($mailHeader))."
-To : " . $toEmail."
-Subject : " . $subject."
-Message : " . $message."
-</pre>\n");
- } elseif (($HTML == 'Y') && (EXT_IS_ACTIVE('html_mail'))) {
+ outputHtml('<pre>
+Headers : ' . encodeEntities(utf8_decode(trim($mailHeader))) . '
+To : ' . encodeEntities(utf8_decode($toEmail)) . '
+Subject : ' . encodeEntities(utf8_decode($subject)) . '
+Message : ' . encodeEntities(utf8_decode($message)) . '
+</pre>');
+
+ // This is always fine
+ return true;
+ } elseif (($isHtml == 'Y') && (isExtensionActive('html_mail'))) {
// Send mail as HTML away
- sendHtmlEmail($toEmail, $subject, $message, $mailHeader);
+ return sendHtmlEmail($toEmail, $subject, $message, $mailHeader);
} elseif (!empty($toEmail)) {
// Send Mail away
- sendRawEmail($toEmail, $subject, $message, $mailHeader);
- } elseif ($HTML == 'N') {
+ return sendRawEmail($toEmail, $subject, $message, $mailHeader);
+ } elseif ($isHtml != 'Y') {
// Problem found!
- sendRawEmail(constant('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader);
+ return sendRawEmail(getConfig('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader);
}
+
+ // Why did we end up here? This should not happen
+ debug_report_bug(__FUNCTION__, __LINE__, 'Ending up: template=' . $template);
}
-// Check if legacy or PHPMailer command
+// Check to use wether legacy mail() command or PHPMailer class
// @TODO Rewrite this to an extension 'smtp'
// @private
function checkPhpMailerUsage() {
// Send out a raw email with PHPMailer class or legacy mail() command
function sendRawEmail ($toEmail, $subject, $message, $from) {
+ // Just compile all again, to put out all configs, etc.
+ eval('$toEmail = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($toEmail)), false) . '");');
+ eval('$subject = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($subject)), false) . '");');
+ eval('$message = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($message)), false) . '");');
+ eval('$from = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($from)) , false) . '");');
+
// Shall we use PHPMailer class or legacy mode?
if (checkPhpMailerUsage()) {
// Use PHPMailer class with SMTP enabled
// get new instance
$mail = new PHPMailer();
- $mail->PluginDir = sprintf("%sinc/phpmailer/", constant('PATH'));
+
+ // Set charset to UTF-8
+ $mail->CharSet = 'UTF-8';
+
+ // Path for PHPMailer
+ $mail->PluginDir = sprintf("%sinc/phpmailer/", getPath());
$mail->IsSMTP();
$mail->SMTPAuth = true;
$mail->Username = getConfig('SMTP_USER');
$mail->Password = getConfig('SMTP_PASSWORD');
if (empty($from)) {
- $mail->From = constant('WEBMASTER');
+ $mail->From = getConfig('WEBMASTER');
} else {
$mail->From = $from;
}
- $mail->FromName = constant('MAIN_TITLE');
+ $mail->FromName = getMainTitle();
$mail->Subject = $subject;
- if ((EXT_IS_ACTIVE('html_mail')) && (strip_tags($message) != $message)) {
+ if ((isExtensionActive('html_mail')) && (secureString($message) != $message)) {
$mail->Body = $message;
$mail->AltBody = 'Your mail program required HTML support to read this mail!';
$mail->WordWrap = 70;
$mail->Body = decodeEntities($message);
}
$mail->AddAddress($toEmail, '');
- $mail->AddReplyTo(constant('WEBMASTER'), constant('MAIN_TITLE'));
- $mail->AddCustomHeader('Errors-To:' . constant('WEBMASTER'));
- $mail->AddCustomHeader('X-Loop:' . constant('WEBMASTER'));
+ $mail->AddReplyTo(getConfig('WEBMASTER'), getMainTitle());
+ $mail->AddCustomHeader('Errors-To:' . getConfig('WEBMASTER'));
+ $mail->AddCustomHeader('X-Loop:' . getConfig('WEBMASTER'));
$mail->Send();
+
+ // Has an error occured?
+ if (!empty($mail->ErrorInfo)) {
+ // Log message
+ logDebugMessage(__FUNCTION__, __LINE__, 'Error while sending mail: ' . $mail->ErrorInfo);
+
+ // Raise an error
+ return false;
+ } else {
+ // All fine!
+ return true;
+ }
} else {
// Use legacy mail() command
- mail($toEmail, $subject, decodeEntities($message), $from);
+ return mail($toEmail, $subject, decodeEntities($message), $from);
}
}
// Generate a password in a specified length or use default password length
-function generatePassword ($length = 0) {
+function generatePassword ($length = '0') {
// Auto-fix invalid length of zero
- if ($length == 0) $length = getConfig('pass_len');
+ if ($length == '0') $length = getConfig('pass_len');
// Initialize array with all allowed chars
$ABC = explode(',', 'a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,0,1,2,3,4,5,6,7,8,9,-,+,_,/,.');
// Start creating password
$PASS = '';
- for ($i = 0; $i < $length; $i++) {
+ for ($i = '0'; $i < $length; $i++) {
$PASS .= $ABC[mt_rand(0, count($ABC) -1)];
} // END - for
// Generates a human-readable timestamp from the Uni* stamp
function generateDateTime ($time, $mode = '0') {
+ // If the stamp is zero it mostly didn't "happen"
+ if ($time == '0') {
+ // Never happend
+ return '{--NEVER_HAPPENED--}';
+ } // END - if
+
// Filter out numbers
$time = bigintval($time);
- // If the stamp is zero it mostly didn't "happen"
- if ($time == 0) {
- // Never happend
- return getMessage('NEVER_HAPPENED');
+ // Is it cached?
+ if (isset($GLOBALS[__FUNCTION__][$time][$mode])) {
+ // Then use it
+ return $GLOBALS[__FUNCTION__][$time][$mode];
} // END - if
- switch (getLanguage())
- {
+ // Detect language
+ switch (getLanguage()) {
case 'de': // German date / time format
switch ($mode) {
case '0': $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break;
- case '1': $ret = strtolower(date("d.m.Y - H:i", $time)); break;
- case '2': $ret = date("d.m.Y|H:i", $time); break;
- case '3': $ret = date("d.m.Y", $time); break;
+ case '1': $ret = strtolower(date('d.m.Y - H:i', $time)); break;
+ case '2': $ret = date('d.m.Y|H:i', $time); break;
+ case '3': $ret = date('d.m.Y', $time); break;
+ case '4': $ret = date('d.m.Y|H:i:s', $time); break;
+ case '5': $ret = date('d-m-Y (l-F-T)', $time); break;
+ case '6': $ret = date('Ymd', $time); break;
default:
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
break;
}
break;
- default: // Default is the US date / time format!
- switch ($mode) {
- case '0': $ret = date("r", $time); break;
- case '1': $ret = date("Y-m-d - g:i A", $time); break;
- case '2': $ret = date("y-m-d|H:i", $time); break;
- case '3': $ret = date("y-m-d", $time); break;
- default:
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
- break;
- }
- }
+ default: // Default is the US date / time format!
+ switch ($mode) {
+ case '0': $ret = date('r', $time); break;
+ case '1': $ret = strtolower(date('Y-m-d - g:i A', $time)); break;
+ case '2': $ret = date('y-m-d|H:i', $time); break;
+ case '3': $ret = date('y-m-d', $time); break;
+ case '4': $ret = date('d.m.Y|H:i:s', $time); break;
+ case '5': $ret = date('d-m-Y (l-F-T)', $time); break;
+ case '6': $ret = date('Ymd', $time); break;
+ default:
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
+ break;
+ } // END - switch
+ } // END - switch
+
+ // Store it in cache
+ $GLOBALS[__FUNCTION__][$time][$mode] = $ret;
+
+ // Return result
return $ret;
}
// Translates Y/N to yes/no
function translateYesNo ($yn) {
- // Default
- $translated = "??? (" . $yn.')';
- switch ($yn) {
- case 'Y': $translated = getMessage('YES'); break;
- case 'N': $translated = getMessage('NO'); break;
- default:
- // Log unknown value
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected Y/N!", $yn));
- break;
- }
+ // Is it cached?
+ if (!isset($GLOBALS[__FUNCTION__][$yn])) {
+ // Default
+ $GLOBALS[__FUNCTION__][$yn] = '??? (' . $yn . ')';
+ switch ($yn) {
+ case 'Y': $GLOBALS[__FUNCTION__][$yn] = '{--YES--}'; break;
+ case 'N': $GLOBALS[__FUNCTION__][$yn] = '{--NO--}'; break;
+ default:
+ // Log unknown value
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected Y/N!", $yn));
+ break;
+ } // END - switch
+ } // END - if
// Return it
- return $translated;
+ return $GLOBALS[__FUNCTION__][$yn];
}
// Translates the "pool type" into human-readable
function translatePoolType ($type) {
- // Default?type is unknown
- $translated = sprintf(getMessage('POOL_TYPE_UNKNOWN'), $type);
-
- // Generate constant
- $constName = sprintf("POOL_TYPE_%s", $type);
-
- // Does it exist?
- if (defined($constName)) {
- // Then use it
- $translated = getMessage($constName);
- } // END - if
-
// Return "translation"
- return $translated;
+ return sprintf("{--POOL_TYPE_%s--}", $type);
}
// Translates the american decimal dot into a german comma
-function translateComma ($dotted, $cut = true, $max = 0) {
+function translateComma ($dotted, $cut = true, $max = '0') {
+ // First, cast all to double, due to PHP changes
+ $dotted = (double) $dotted;
+
// Default is 3 you can change this in admin area "Misc -> Misc Options"
- if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', '3');
+ if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', 3);
// Use from config is default
$maxComma = getConfig('max_comma');
if ($max > 0) $maxComma = $max;
// Cut zeros off?
- if (($cut) && ($max == 0)) {
+ if (($cut === true) && ($max == '0')) {
// Test for commata if in cut-mode
$com = explode('.', $dotted);
if (count($com) < 2) {
// Don't display commatas even if there are none... ;-)
- $maxComma = 0;
- }
+ $maxComma = '0';
+ } // END - if
} // END - if
// Debug log
- //* DEBUG: */ DEBUG_LOG(__FUNCTION__, __LINE__, "dotted={$dotted},maxComma={$maxComma}");
// Translate it now
+ $translated = $dotted;
switch (getLanguage()) {
- case 'de':
- $dotted = number_format($dotted, $maxComma, ',', '.');
+ case 'de': // German language
+ $translated = number_format($dotted, $maxComma, ',', '.');
break;
- default:
- $dotted = number_format($dotted, $maxComma, '.', ',');
+ default: // All others
+ $translated = number_format($dotted, $maxComma, '.', ',');
break;
- }
+ } // END - switch
// Return translated value
- return $dotted;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dotted=' . $dotted . ',translated=' . $translated . ',maxComma=' . $maxComma);
+ return $translated;
}
// Translate Uni*-like gender to human-readable
// Male/female or company?
switch ($gender) {
- case 'M': $ret = getMessage('GENDER_M'); break;
- case 'F': $ret = getMessage('GENDER_F'); break;
- case 'C': $ret = getMessage('GENDER_C'); break;
+ case 'M': // Male
+ case 'F': // Female
+ case 'C': // Company
+ $ret = sprintf("{--GENDER_%s--}", $gender);
+ break;
+
default:
- // Log unknown gender
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
+ // Please report bugs on unknown genders
+ debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
break;
- }
+ } // END - switch
// Return translated gender
return $ret;
// "Translates" the user status
function translateUserStatus ($status) {
- switch ($status)
- {
+ // Generate message depending on status
+ switch ($status) {
case 'UNCONFIRMED':
case 'CONFIRMED':
case 'LOCKED':
- $ret = getMessage(sprintf("ACCOUNT_%s", $status));
+ $ret = sprintf("{--ACCOUNT_STATUS_%s--}", $status);
break;
case '':
case null:
- $ret = getMessage('ACCOUNT_DELETED');
+ $ret = '{--ACCOUNT_STATUS_DELETED--}';
break;
default:
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
- $ret = sprintf(getMessage('UNKNOWN_STATUS'), $status);
+ // Please report all unknown status
+ debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown status %s(%s) detected.", $status, gettype($status)));
break;
- }
+ } // END - switch
// Return it
return $ret;
}
+// "Translates" 'visible' and 'locked' to a CSS class
+function translateMenuVisibleLocked ($content, $prefix = '') {
+ // Translate 'visible' and keep an eye on the prefix
+ switch ($content['visible']) {
+ // Should be visible
+ case 'Y': $content['visible_css'] = $prefix . 'menu_visible' ; break;
+ case 'N': $content['visible_css'] = $prefix . 'menu_invisible'; break;
+ default:
+ // Please report this
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported visible value detected. content=<pre>' . print_r($content, true) . '</pre>');
+ break;
+ } // END - switch
+
+ // Translate 'locked' and keep an eye on the prefix
+ switch ($content['locked']) {
+ // Should be locked
+ case 'Y': $content['locked_css'] = $prefix . 'menu_locked' ; break;
+ case 'N': $content['locked_css'] = $prefix . 'menu_unlocked'; break;
+ default:
+ // Please report this
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported locked value detected. content=<pre>' . print_r($content, true) . '</pre>');
+ break;
+ } // END - switch
+
+ // Return the resulting array
+ return $content;
+}
+
// Generates an URL for the dereferer
-function DEREFERER ($URL) {
+function generateDerefererUrl ($URL) {
// Don't de-refer our own links!
- if (substr($URL, 0, strlen(constant('URL'))) != constant('URL')) {
+ if (substr($URL, 0, strlen(getUrl())) != getUrl()) {
// De-refer this link
- $URL = 'modules.php?module=loader&url=' . encodeString(compileUriCode($URL));
+ $URL = '{%url=modules.php?module=loader&url=' . encodeString(compileUriCode($URL)) . '%}';
} // END - if
// Return link
}
// Generates an URL for the frametester
-function FRAMETESTER ($URL) {
+function generateFrametesterUrl ($URL) {
// Prepare frametester URL
- $frametesterUrl = sprintf("{!URL!}/modules.php?module=frametester&url=%s",
- encodeString(compileUriCode($URL))
+ $frametesterUrl = sprintf("{%%url=modules.php?module=frametester&url=%s%%}",
+ encodeString(compileUriCode($URL))
);
+
+ // Return the new URL
return $frametesterUrl;
}
// Count entries from e.g. a selection box
function countSelection ($array) {
- $ret = 0;
- if (is_array($array)) {
- foreach ($array as $key => $selected) {
- if (!empty($selected)) $ret++;
- }
- }
- return $ret;
-}
-
-// Generate XHTML code for the CAPTCHA
-function generateCaptchaCode ($code, $type, $DATA, $uid) {
- return '<IMG border="0" alt="Code" src="{!URL!}/mailid_top.php?uid=' . $uid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '" />';
-}
-
-// Loads an email template and compiles it
-function LOAD_EMAIL_TEMPLATE ($template, $content = array(), $UID = '0') {
- global $DATA;
-
- // Our configuration is kept non-global here
- $_CONFIG = getConfigArray();
-
- // Make sure all template names are lowercase!
- $template = strtolower($template);
-
- // Default 'nickname' if extension is not installed
- $nick = '---';
-
- // Prepare IP number and User Agent
- $REMOTE_ADDR = detectRemoteAddr();
- $HTTP_USER_AGENT = detectUserAgent();
-
- // Default admin
- $ADMIN = constant('MAIN_TITLE');
-
- // Is the admin logged in?
- if (IS_ADMIN()) {
- // Get admin id
- $aid = getCurrentAdminId();
-
- // Load Admin data
- $ADMIN = getAdminEmail($aid);
- } // END - if
-
- // Neutral email address is default
- $email = constant('WEBMASTER');
-
- // Expiration in a nice output format
- // NOTE: Use $content[expiration] in your templates instead of $EXPIRATION
- if (getConfig('auto_purge') == 0) {
- // Will never expire!
- $EXPIRATION = getMessage('MAIL_WILL_NEVER_EXPIRE');
- } else {
- // Create nice date string
- $EXPIRATION = createFancyTime(getConfig('auto_purge'));
- }
-
- // Is content an array?
- if (is_array($content)) {
- // Add expiration to array, $EXPIRATION is now deprecated!
- $content['expiration'] = $EXPIRATION;
- } // END - if
-
- // Load user's data
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):UID={$UID},template={$template},content[]=".gettype($content)."<br />\n";
- if (($UID > 0) && (is_array($content))) {
- // If nickname extension is installed, fetch nickname as well
- if (EXT_IS_ACTIVE('nickname')) {
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NICKNAME!<br />\n";
- // Load nickname
- $result = SQL_QUERY_ESC("SELECT surname, family, gender, email, nickname FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1",
- array(bigintval($UID)), __FUNCTION__, __LINE__);
- } else {
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NO-NICK!<br />\n";
- /// Load normal data
- $result = SQL_QUERY_ESC("SELECT surname, family, gender, email FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1",
- array(bigintval($UID)), __FUNCTION__, __LINE__);
- }
-
- // Fetch and merge data
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - PRE<br />\n";
- $content = merge_array($content, SQL_FETCHARRAY($result));
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - AFTER<br />\n";
-
- // Free result
- SQL_FREERESULT($result);
- } // END - if
-
- // Translate M to male or F to female if present
- if (isset($content['gender'])) $content['gender'] = translateGender($content['gender']);
-
- // Overwrite email from data if present
- if (isset($content['email'])) $email = $content['email'];
-
- // Store email for some functions in global data array
- $DATA['email'] = $email;
-
- // Base directory
- $basePath = sprintf("%stemplates/%s/emails/", constant('PATH'), getLanguage());
-
- // Check for admin/guest/member templates
- if (strpos($template, 'admin_') > -1) {
- // Admin template found
- $FQFN = $basePath.'admin/' . $template.'.tpl';
- } elseif (strpos($template, 'guest_') > -1) {
- // Guest template found
- $FQFN = $basePath.'guest/' . $template.'.tpl';
- } elseif (strpos($template, 'member_') > -1) {
- // Member template found
- $FQFN = $basePath.'member/' . $template.'.tpl';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
- if (EXT_IS_ACTIVE($test)) {
- // Set extra path to extension's name
- $FQFN = $basePath . $test.'/' . $template.'.tpl';
- } else {
- // No special filename
- $FQFN = $basePath . $template.'.tpl';
- }
- }
-
- // Does the special template exists?
- if (!isFileReadable($FQFN)) {
- // Reset to default template
- $FQFN = $basePath . $template.'.tpl';
+ // Integrity check
+ if (!is_array($array)) {
+ // Not an array!
+ debug_report_bug(__FUNCTION__, __LINE__, 'No array provided.');
} // END - if
- // Now does the final template exists?
- $newContent = '';
- if (isFileReadable($FQFN)) {
- // The local file does exists so we load it. :)
- $tmpl_file = readFromFile($FQFN);
- $tmpl_file = SQL_ESCAPE($tmpl_file);
-
- // Run code
- $tmpl_file = "\$newContent = decodeEntities(\"".COMPILE_CODE($tmpl_file)."\");";
- eval($tmpl_file);
- } elseif (!empty($template)) {
- // Template file not found!
- $newContent = "{--TEMPLATE_404--}: " . $template."<br />
-{--TEMPLATE_CONTENT--}
-<pre>".print_r($content, true)."</pre>
-{--TEMPLATE_DATA--}
-<pre>".print_r($DATA, true)."</pre>
-<br /><br />";
-
- // Debug mode not active? Then remove the HTML tags
- if (!isDebugModeEnabled()) $newContent = strip_tags($newContent);
- } else {
- // No template name supplied!
- $newContent = getMessage('NO_TEMPLATE_SUPPLIED');
- }
-
- // Is there some content?
- if (empty($newContent)) {
- // Compiling failed
- $newContent = "Compiler error for template {$template}!\nUncompiled content:\n" . $tmpl_file;
- // Add last error if the required function exists
- if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx.";
- } // END - if
+ // Init count
+ $ret = '0';
- // Remove content and data
- unset($content);
- unset($DATA);
+ // Count all entries
+ foreach ($array as $key => $selected) {
+ // Is it checked?
+ if (!empty($selected)) $ret++;
+ } // END - foreach
- // Return compiled content
- return COMPILE_CODE($newContent);
+ // Return counted selections
+ return $ret;
}
// Generates a timestamp (some wrapper for mktime())
-function makeTime ($H, $M, $S, $stamp) {
+function makeTime ($hours, $minutes, $seconds, $stamp) {
// Extract day, month and year from given timestamp
- $day = date('d', $stamp);
- $month = date('m', $stamp);
- $year = date('Y', $stamp);
+ $days = getDay($stamp);
+ $months = getMonth($stamp);
+ $years = getYear($stamp);
// Create timestamp for wished time which depends on extracted date
- return mktime($H, $M, $S, $month, $day, $year);
+ return mktime(
+ $hours,
+ $minutes,
+ $seconds,
+ $months,
+ $days,
+ $years
+ );
}
// Redirects to an URL and if neccessarry extends it with own base URL
-function redirectToUrl ($URL) {
- // Compile out URI codes
- $URL = compileUriCode($URL);
-
- // Check if http(s):// is there
- if ((substr($URL, 0, 7) != 'http://') && (substr($URL, 0, 8) != 'https://')) {
- // Make all URLs full-qualified
- $URL = constant('URL') . '/' . $URL;
- } // END - if
+function redirectToUrl ($URL, $allowSpider = true) {
+ // Remove {%url=
+ if (substr($URL, 0, 6) == '{%url=') $URL = substr($URL, 6, -2);
- // Three different debug ways...
- //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
- //* DEBUG: */ DEBUG_LOG(__FUNCTION__, __LINE__, $URL);
- //* DEBUG: */ die($URL);
+ // Compile out codes
+ eval('$URL = "' . compileRawCode(encodeUrl($URL)) . '";');
// Default 'rel' value is external, nofollow is evil from Google and hurts the Internet
$rel = ' rel="external"';
// Do we have internal or external URL?
- if (substr($URL, 0, strlen(constant('URL'))) == constant('URL')) {
+ if (substr($URL, 0, strlen(getUrl())) == getUrl()) {
// Own (=internal) URL
$rel = '';
} // END - if
- // Get output buffer
- $OUTPUT = ob_get_contents();
-
- // Clear it only if there is content
- if (!empty($OUTPUT)) {
- clearOutputBuffer();
- } // END - if
+ // Three different ways to debug...
+ //* DEBUG: */ debug_report_bug(__FUNCTION__, __LINE__, sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
+ //* DEBUG: */ die($URL);
// Simple probe for bots/spiders from search engines
- if ((strpos(detectUserAgent(), 'spider') !== false) || (strpos(detectUserAgent(), 'bot') !== false)) {
- // Secure the URL against bad things such als HTML insertions and so on...
- $URL = htmlentities(strip_tags($URL), ENT_QUOTES);
+ if ((isSpider()) && ($allowSpider === true)) {
+ // Set HTTP-Status
+ setHttpStatus('200 OK');
+
+ // Set content-type here to fix a missing array element
+ setContentType('text/html');
// Output new location link as anchor
- OUTPUT_HTML('<a href="' . $URL . '"' . $rel . '>' . $URL . '</a>');
+ outputHtml('<a href="' . $URL . '"' . $rel . '>' . secureString($URL) . '</a>');
} elseif (!headers_sent()) {
+ // Clear output buffer
+ clearOutputBuffer();
+
+ // Clear own output buffer
+ $GLOBALS['output'] = '';
+
+ // Set header
+ setHttpStatus('302 Found');
+
// Load URL when headers are not sent
- //* DEBUG: */ debug_report_bug("URL={$URL}");
- sendHeader('Location: '.str_replace('&', '&', $URL));
+ sendRawRedirect(doFinalCompilation(str_replace('&', '&', $URL), false));
} else {
// Output error message
loadInclude('inc/header.php');
- LOAD_TEMPLATE('redirect_url', false, str_replace('&', '&', $URL));
+ loadTemplate('redirect_url', false, str_replace('&', '&', $URL));
loadInclude('inc/footer.php');
}
shutdown();
}
-// Wrapper for redirectToUrl but URL comes from a configuration entry
-function redirectToConfiguredUrl ($configEntry) {
- // Get the URL
- $URL = getConfig($configEntry);
-
- // Is this URL set?
- if (is_null($URL)) {
- // Then abort here
- trigger_error(sprintf("Configuration entry %s is not set!", $configEntry));
- } // END - if
-
- // Load the URL
- redirectToUrl($URL);
-}
-
-//
-function COMPILE_CODE ($code, $simple = false, $constants = true, $full = true) {
- // Is the code a string?
- if (!is_string($code)) {
- // Silently return it
- return $code;
- } // END - if
-
- // Init replacement-array with full security characters
- $secChars = $GLOBALS['security_chars'];
-
- // Select smaller set of chars to replace when we e.g. want to compile URLs
- if (!$full) $secChars = $GLOBALS['url_chars'];
-
- // Compile constants
- if ($constants === true) {
- // BEFORE 0.2.1 : Language and data constants
- // WITH 0.2.1+ : Only language constants
- $code = str_replace('{--','".', str_replace('--}','."', $code));
-
- // BEFORE 0.2.1 : Not used
- // WITH 0.2.1+ : Data constants
- $code = str_replace('{!','".', str_replace("!}", '."', $code));
- } // END - if
-
- // Compile QUOT and other non-HTML codes
- foreach ($secChars['to'] as $k => $to) {
- // Do the reversed thing as in inc/libs/security_functions.php
- $code = str_replace($to, $secChars['from'][$k], $code);
- } // END - foreach
-
- // But shall I keep simple quotes for later use?
- if ($simple) $code = str_replace("'", '{QUOT}', $code);
-
- // Find $content[bla][blub] entries
- preg_match_all('/\$(content|DATA)((\[([a-zA-Z0-9-_]+)\])*)/', $code, $matches);
-
- // Are some matches found?
- if ((count($matches) > 0) && (count($matches[0]) > 0)) {
- // Replace all matches
- $matchesFound = array();
- foreach ($matches[0] as $key => $match) {
- // Fuzzy look has failed by default
- $fuzzyFound = false;
-
- // Fuzzy look on match if already found
- foreach ($matchesFound as $found => $set) {
- // Get test part
- $test = substr($found, 0, strlen($match));
-
- // Does this entry exist?
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):found={$found},match={$match},set={$set}<br />\n";
- if ($test == $match) {
- // Match found!
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):fuzzyFound!<br />\n";
- $fuzzyFound = true;
- break;
- } // END - if
- } // END - foreach
-
- // Skip this entry?
- if ($fuzzyFound) continue;
-
- // Take all string elements
- if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_" . $matches[4][$key]]))) {
- // Replace it in the code
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):key={$key},match={$match}<br />\n";
- $newMatch = str_replace("[" . $matches[4][$key]."]", "['" . $matches[4][$key]."']", $match);
- $code = str_replace($match, "\"." . $newMatch.".\"", $code);
- $matchesFound[$key."_" . $matches[4][$key]] = 1;
- $matchesFound[$match] = 1;
- } elseif (!isset($matchesFound[$match])) {
- // Not yet replaced!
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):match={$match}<br />\n";
- $code = str_replace($match, "\"." . $match.".\"", $code);
- $matchesFound[$match] = 1;
- }
- } // END - foreach
- } // END - if
-
- // Return compiled code
- return $code;
-}
-
/************************************************************************
* *
* Gaenderter Sortier-Algorythmus, $array wird nach dem Array (!) *
* Sie, dass es doch nicht so schwer ist! :-) *
* *
************************************************************************/
-function array_pk_sort (&$array, $a_sort, $primary_key = 0, $order = -1, $nums = false) {
+function array_pk_sort (&$array, $a_sort, $primary_key = '0', $order = -1, $nums = false) {
$dummy = $array;
while ($primary_key < count($a_sort)) {
foreach ($dummy[$a_sort[$primary_key]] as $key => $value) {
foreach ($dummy[$a_sort[$primary_key]] as $key2 => $value2) {
$match = false;
- if (!$nums) {
+ if ($nums === false) {
// Sort byte-by-byte (also numbers will be interpreted as chars! E.g.: "9" > "10")
if (($key != $key2) && (strcmp(strtolower($dummy[$a_sort[$primary_key]][$key]), strtolower($dummy[$a_sort[$primary_key]][$key2])) == $order)) $match = true;
} elseif ($key != $key2) {
$array = $dummy;
}
+
//
-function ADD_SELECTION ($type, $default, $prefix = '', $id = '0') {
- $OUT = '';
+// Deprecated : $length
+// Optional : $DATA
+//
+function generateRandomCode ($length, $code, $userid, $DATA = '') {
+ // Build server string
+ $server = $_SERVER['PHP_SELF'] . getEncryptSeperator() . detectUserAgent() . getEncryptSeperator() . getenv('SERVER_SOFTWARE') . getEncryptSeperator() . detectRemoteAddr();
- if ($type == 'yn') {
- // This is a yes/no selection only!
- if ($id > 0) $prefix .= "[" . $id."]";
- $OUT .= " <select name=\"" . $prefix."\" class=\"register_select\" size=\"1\">\n";
- } else {
- // Begin with regular selection box here
- if (!empty($prefix)) $prefix .= "_";
- $type2 = $type;
- if ($id > 0) $type2 .= "[" . $id."]";
- $OUT .= " <select name=\"".strtolower($prefix . $type2)."\" class=\"register_select\" size=\"1\">\n";
- }
+ // Build key string
+ $keys = getConfig('SITE_KEY') . getEncryptSeperator() . getConfig('DATE_KEY');
+ if (isConfigEntrySet('secret_key')) $keys .= getEncryptSeperator().getSecretKey();
+ if (isConfigEntrySet('file_hash')) $keys .= getEncryptSeperator().getFileHash();
+ $keys .= getEncryptSeperator() . getDateFromPatchTime();
+ if (isConfigEntrySet('master_salt')) $keys .= getEncryptSeperator().getMasterSalt();
- switch ($type) {
- case "day": // Day
- for ($idx = 1; $idx < 32; $idx++) {
- $OUT .= "<option value=\"" . $idx."\"";
- if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- } // END - for
- break;
+ // Build string from misc data
+ $data = $code . getEncryptSeperator() . $userid . getEncryptSeperator() . $DATA;
- case "month": // Month
- foreach ($GLOBALS['month_descr'] as $month => $descr) {
- $OUT .= "<option value=\"" . $month."\"";
- if ($default == $month) $OUT .= ' selected="selected"';
- $OUT .= ">" . $descr."</option>\n";
- } // END - for
- break;
+ // Add more additional data
+ if (isSessionVariableSet('u_hash')) $data .= getEncryptSeperator() . getSession('u_hash');
- case "year": // Year
- // Get current year
- $year = date('Y', time());
+ // Add referal id, language, theme and userid
+ $data .= getEncryptSeperator() . determineReferalId();
+ $data .= getEncryptSeperator() . getLanguage();
+ $data .= getEncryptSeperator() . getCurrentTheme();
+ $data .= getEncryptSeperator() . getMemberId();
- // Use configured min age or fixed?
- if (GET_EXT_VERSION('other') >= '0.2.1') {
- // Configured
- $startYear = $year - getConfig('min_age');
- } else {
- // Fixed 16 years
- $startYear = $year - 16;
- }
+ // Calculate number for generating the code
+ $a = $code + getConfig('_ADD') - 1;
- // Calculate earliest year (100 years old people can still enter Internet???)
- $minYear = $year - 100;
-
- // Check if the default value is larger than minimum and bigger than actual year
- if (($default > $minYear) && ($default >= $year)) {
- for ($idx = $year; $idx < ($year + 11); $idx++) {
- $OUT .= "<option value=\"" . $idx."\"";
- if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- } // END - for
- } elseif ($default == -1) {
- // Current year minus 1
- for ($idx = $startYear; $idx <= ($year + 1); $idx++)
- {
- $OUT .= "<option value=\"" . $idx."\">" . $idx."</option>\n";
- }
- } else {
- // Get current year and subtract the configured minimum age
- $OUT .= "<option value=\"".($minYear - 1)."\"><" . $minYear."</option>\n";
- // Calculate earliest year depending on extension version
- if (GET_EXT_VERSION('other') >= '0.2.1') {
- // Use configured minimum age
- $year = date('Y', time()) - getConfig('min_age');
- } else {
- // Use fixed 16 years age
- $year = date('Y', time()) - 16;
- }
-
- // Construct year selection list
- for ($idx = $minYear; $idx <= $year; $idx++) {
- $OUT .= "<option value=\"" . $idx."\"";
- if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- } // END - for
- }
- break;
-
- case "sec":
- case "min":
- for ($idx = 0; $idx < 60; $idx+=5) {
- if (strlen($idx) == 1) $idx = '0' . $idx;
- $OUT .= "<option value=\"" . $idx."\"";
- if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- } // END - for
- break;
-
- case "hour":
- for ($idx = 0; $idx < 24; $idx++) {
- if (strlen($idx) == 1) $idx = '0' . $idx;
- $OUT .= "<option value=\"" . $idx."\"";
- if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- } // END - for
- break;
-
- case 'yn':
- $OUT .= "<option value=\"Y\"";
- if ($default == 'Y') $OUT .= ' selected="selected"';
- $OUT .= ">{--YES--}</option>\n<option value=\"N\"";
- if ($default == 'N') $OUT .= ' selected="selected"';
- $OUT .= ">{--NO--}</option>\n";
- break;
- }
- $OUT .= " </select>\n";
- return $OUT;
-}
-
-//
-// Deprecated : $length
-// Optional : $DATA
-//
-function generateRandomCode ($length, $code, $uid, $DATA = '') {
- // Fix missing _MAX constant
- // @TODO Rewrite this unnice code
- if (!defined('_MAX')) define('_MAX', 15235);
-
- // Build server string
- $server = $_SERVER['PHP_SELF'].getConfig('ENCRYPT_SEPERATOR').detectUserAgent().getConfig('ENCRYPT_SEPERATOR').getenv('SERVER_SOFTWARE').getConfig('ENCRYPT_SEPERATOR').detectRemoteAddr().":'.':".filemtime(constant('PATH').'inc/databases.php');
-
- // Build key string
- $keys = getConfig('SITE_KEY').getConfig('ENCRYPT_SEPERATOR').getConfig('DATE_KEY');
- if (isConfigEntrySet('secret_key')) $keys .= getConfig('ENCRYPT_SEPERATOR').getConfig('secret_key');
- if (isConfigEntrySet('file_hash')) $keys .= getConfig('ENCRYPT_SEPERATOR').getConfig('file_hash');
- $keys .= getConfig('ENCRYPT_SEPERATOR').date("d-m-Y (l-F-T)", getConfig(('patch_ctime')));
- if (isConfigEntrySet('master_salt')) $keys .= getConfig('ENCRYPT_SEPERATOR').getConfig('master_salt');
-
- // Build string from misc data
- $data = $code.getConfig('ENCRYPT_SEPERATOR') . $uid.getConfig('ENCRYPT_SEPERATOR') . $DATA;
-
- // Add more additional data
- if (isSessionVariableSet('u_hash')) $data .= getConfig('ENCRYPT_SEPERATOR').getSession('u_hash');
- if (isUserIdSet()) $data .= getConfig('ENCRYPT_SEPERATOR').getUserId();
- if (isSessionVariableSet('mxchange_theme')) $data .= getConfig('ENCRYPT_SEPERATOR').getSession('mxchange_theme');
- if (isSessionVariableSet('mx_lang')) $data .= getConfig('ENCRYPT_SEPERATOR').getLanguage();
- if (isset($GLOBALS['refid'])) $data .= getConfig('ENCRYPT_SEPERATOR') . $GLOBALS['refid'];
-
- // Calculate number for generating the code
- $a = $code + getConfig('_ADD') - 1;
-
- if (isConfigEntrySet('master_hash')) {
- // Generate hash with master salt from modula of number with the prime number and other data
- $saltedHash = generateHash(($a % getConfig('_PRIME')).getConfig('ENCRYPT_SEPERATOR') . $server.getConfig('ENCRYPT_SEPERATOR') . $keys.getConfig('ENCRYPT_SEPERATOR') . $data.getConfig('ENCRYPT_SEPERATOR').getConfig('DATE_KEY').getConfig('ENCRYPT_SEPERATOR') . $a, getConfig('master_salt'));
+ if (isConfigEntrySet('master_salt')) {
+ // Generate hash with master salt from modula of number with the prime number and other data
+ $saltedHash = generateHash(($a % getPrime()) . getEncryptSeperator() . $server . getEncryptSeperator() . $keys . getEncryptSeperator() . $data . getEncryptSeperator() . getConfig('DATE_KEY') . getEncryptSeperator() . $a, getMasterSalt());
// Create number from hash
- $rcode = hexdec(substr($saltedHash, strlen(getConfig('master_salt')), 9)) / abs(constant('_MAX') - $a + sqrt(getConfig('_ADD'))) / pi();
+ $rcode = hexdec(substr($saltedHash, strlen(getMasterSalt()), 9)) / abs(getConfig('rand_no') - $a + sqrt(getConfig('_ADD'))) / pi();
} else {
// Generate hash with "hash of site key" from modula of number with the prime number and other data
- $saltedHash = generateHash(($a % getConfig('_PRIME')).getConfig('ENCRYPT_SEPERATOR') . $server.getConfig('ENCRYPT_SEPERATOR') . $keys.getConfig('ENCRYPT_SEPERATOR') . $data.getConfig('ENCRYPT_SEPERATOR').getConfig('DATE_KEY').getConfig('ENCRYPT_SEPERATOR') . $a, substr(sha1(getConfig('SITE_KEY')), 0, 8));
+ $saltedHash = generateHash(($a % getPrime()) . getEncryptSeperator() . $server . getEncryptSeperator() . $keys . getEncryptSeperator() . $data . getEncryptSeperator() . getConfig('DATE_KEY') . getEncryptSeperator() . $a, substr(sha1(getConfig('SITE_KEY')), 0, getSaltLength()));
// Create number from hash
- $rcode = hexdec(substr($saltedHash, 8, 9)) / abs(constant('_MAX') - $a + sqrt(getConfig('_ADD'))) / pi();
+ $rcode = hexdec(substr($saltedHash, 8, 9)) / abs(getConfig('rand_no') - $a + sqrt(getConfig('_ADD'))) / pi();
}
// At least 10 numbers shall be secure enought!
$len = getConfig('code_length');
- if ($len == 0) $len = $length;
- if ($len == 0) $len = 10;
+ if ($len == '0') $len = $length;
+ if ($len == '0') $len = 10;
// Cut off requested counts of number
$return = substr(str_replace('.', '', $rcode), 0, $len);
}
// Does only allow numbers
-function bigintval ($num, $castValue = true) {
+function bigintval ($num, $castValue = true, $abortOnMismatch = true) {
// Filter all numbers out
- $ret = preg_replace("/[^0123456789]/", '', $num);
+ $ret = preg_replace('/[^0123456789]/', '', $num);
// Shall we cast?
- if ($castValue) $ret = (double)$ret;
+ if ($castValue === true) $ret = (double)$ret;
// Has the whole value changed?
- // @TODO Remove this if() block if all is working fine
- if ('' . $ret . '' != '' . $num . '') {
+ if (('' . $ret . '' != '' . $num . '') && ($abortOnMismatch === true)) {
// Log the values
- //debug_report_bug("{$ret}<>{$num}");
+ debug_report_bug(__FUNCTION__, __LINE__, 'Problem with number found. ret=' . $ret . ', num='. $num);
} // END - if
// Return result
return $ret;
}
-// Insert the code in $img_code into jpeg or PNG image
-function GENERATE_IMAGE ($img_code, $headerSent=true) {
- if ((strlen($img_code) > 6) || (empty($img_code)) || (getConfig('code_length') == 0)) {
- // Stop execution of function here because of over-sized code length
- return;
- } elseif (!$headerSent) {
- // Return in an HTML code code
- return "<img src=\"{!URL!}/img.php?code=" . $img_code."\" alt=\"Image\" />\n";
- }
-
- // Load image
- $img = sprintf("%s/theme/%s/images/code_bg.%s", constant('PATH'), getCurrentTheme(), getConfig('img_type'));
- if (isFileReadable($img)) {
- // Switch image type
- switch (getConfig('img_type'))
- {
- case 'jpg':
- // Okay, load image and hide all errors
- $image = @imagecreatefromjpeg($img);
- break;
-
- case 'png':
- // Okay, load image and hide all errors
- $image = @imagecreatefrompng($img);
- break;
- }
- } else {
- // Exit function here
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("File for image type %s not found.", getConfig('img_type')));
- return;
- }
-
- // Generate text color (red/green/blue; 0 = dark, 255 = bright)
- $text_color = imagecolorallocate($image, 0, 0, 0);
-
- // Insert code into image
- imagestring($image, 5, 14, 2, $img_code, $text_color);
-
- // Return to browser
- sendHeader('Content-Type: image/' . getConfig('img_type'));
-
- // Output image with matching image factory
- switch (getConfig('img_type')) {
- case 'jpg': imagejpeg($image); break;
- case 'png': imagepng($image); break;
- }
-
- // Remove image from memory
- imagedestroy($image);
-}
-// Create selection box or array of splitted timestamp
-function createTimeSelections ($timestamp, $prefix = '', $display = '', $align = 'center', $return_array=false) {
- // Calculate 2-seconds timestamp
- $stamp = round($timestamp);
- //* DEBUG: */ print("*" . $stamp.'/' . $timestamp."*<br />");
+// Creates a Uni* timestamp from given selection data and prefix
+function createTimestampFromSelections ($prefix, $postData) {
+ // Initial return value
+ $ret = '0';
// Do we have a leap year?
- $SWITCH = 0;
- $TEST = date('Y', time()) / 4;
- $M1 = date('m', time());
- $M2 = date('m', (time() + $timestamp));
+ $SWITCH = '0';
+ $TEST = getYear() / 4;
+ $M1 = getMonth();
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($M2 > "02")) $SWITCH = getConfig('one_day');
-
- // First of all years...
- $Y = abs(floor($timestamp / (31536000 + $SWITCH)));
- //* DEBUG: */ print("Y={$Y}<br />\n");
- // Next months...
- $M = abs(floor($timestamp / 2628000 - $Y * 12));
- //* DEBUG: */ print("M={$M}<br />\n");
- // Next weeks
- $W = abs(floor($timestamp / 604800 - $Y * ((365 + $SWITCH / getConfig('one_day')) / 7) - ($M / 12 * (365 + $SWITCH / getConfig('one_day')) / 7)));
- //* DEBUG: */ print("W={$W}<br />\n");
- // Next days...
- $D = abs(floor($timestamp / 86400 - $Y * (365 + $SWITCH / getConfig('one_day')) - ($M / 12 * (365 + $SWITCH / getConfig('one_day'))) - $W * 7));
- //* DEBUG: */ print("D={$D}<br />\n");
- // Next hours...
- $h = abs(floor($timestamp / 3600 - $Y * (365 + $SWITCH / getConfig('one_day')) * 24 - ($M / 12 * (365 + $SWITCH / getConfig('one_day')) * 24) - $W * 7 * 24 - $D * 24));
- //* DEBUG: */ print("h={$h}<br />\n");
- // Next minutes..
- $m = abs(floor($timestamp / 60 - $Y * (365 + $SWITCH / getConfig('one_day')) * 24 * 60 - ($M / 12 * (365 + $SWITCH / getConfig('one_day')) * 24 * 60) - $W * 7 * 24 * 60 - $D * 24 * 60 - $h * 60));
- //* DEBUG: */ print("m={$m}<br />\n");
- // And at last seconds...
- $s = abs(floor($timestamp - $Y * (365 + $SWITCH / getConfig('one_day')) * 24 * 3600 - ($M / 12 * (365 + $SWITCH / getConfig('one_day')) * 24 * 3600) - $W * 7 * 24 * 3600 - $D * 24 * 3600 - $h * 3600 - $m * 60));
- //* DEBUG: */ print("s={$s}<br />\n");
-
- // Is seconds zero and time is < 60 seconds?
- if (($s == 0) && ($timestamp < 60)) {
- // Fix seconds
- $s = round($timestamp);
- } // END - if
-
- //
- // Now we convert them in seconds...
- //
- if ($return_array) {
- // Just put all data in an array for later use
- $OUT = array(
- 'YEARS' => $Y,
- 'MONTHS' => $M,
- 'WEEKS' => $W,
- 'DAYS' => $D,
- 'HOURS' => $h,
- 'MINUTES' => $m,
- 'SECONDS' => $s
- );
- } else {
- // Generate table
- $OUT = "<div align=\"" . $align."\">\n";
- $OUT .= "<table border=\"0\" cellspacing=\"0\" cellpadding=\"0\" class=\"admin_table dashed\">\n";
- $OUT .= "<tr>\n";
-
- if (ereg('Y', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_YEARS--}</strong></td>\n";
- }
-
- if (ereg("M", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_MONTHS--}</strong></td>\n";
- }
-
- if (ereg("W", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_WEEKS--}</strong></td>\n";
- }
-
- if (ereg("D", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_DAYS--}</strong></td>\n";
- }
-
- if (ereg("h", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_HOURS--}</strong></td>\n";
- }
-
- if (ereg('m', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_MINUTES--}</strong></td>\n";
- }
-
- if (ereg("s", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_SECONDS--}</strong></td>\n";
- }
-
- $OUT .= "</tr>\n";
- $OUT .= "<tr>\n";
-
- if (ereg('Y', $display) || (empty($display))) {
- // Generate year selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ye\" size=\"1\">\n";
- for ($idx = 0; $idx <= 10; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $Y) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_ye\" value=\"0\" />\n";
- }
-
- if (ereg("M", $display) || (empty($display))) {
- // Generate month selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mo\" size=\"1\">\n";
- for ($idx = 0; $idx <= 11; $idx++)
- {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $M) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_mo\" value=\"0\" />\n";
- }
-
- if (ereg("W", $display) || (empty($display))) {
- // Generate week selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_we\" size=\"1\">\n";
- for ($idx = 0; $idx <= 4; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $W) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_we\" value=\"0\" />\n";
- }
-
- if (ereg("D", $display) || (empty($display))) {
- // Generate day selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_da\" size=\"1\">\n";
- for ($idx = 0; $idx <= 31; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $D) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_da\" value=\"0\">\n";
- }
-
- if (ereg("h", $display) || (empty($display))) {
- // Generate hour selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ho\" size=\"1\">\n";
- for ($idx = 0; $idx <= 23; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $h) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_ho\" value=\"0\">\n";
- }
+ if ((floor($TEST) == $TEST) && ($M1 == '02') && ($postData[$prefix . '_mo'] > '02')) $SWITCH = getConfig('ONE_DAY');
- if (ereg('m', $display) || (empty($display))) {
- // Generate minute selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mi\" size=\"1\">\n";
- for ($idx = 0; $idx <= 59; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $m) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_mi\" value=\"0\">\n";
- }
-
- if (ereg("s", $display) || (empty($display))) {
- // Generate second selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_se\" size=\"1\">\n";
- for ($idx = 0; $idx <= 59; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
- if ($idx == $s) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
- } else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_se\" value=\"0\">\n";
- }
- $OUT .= "</tr>\n";
- $OUT .= "</table>\n";
- $OUT .= "</div>\n";
- // Return generated HTML code
- }
- return $OUT;
-}
-
-//
-function createTimestampFromSelections ($prefix, $POST) {
- // Initial return value
- $ret = 0;
-
- // Do we have a leap year?
- $SWITCH = 0;
- $TEST = date('Y', time()) / 4;
- $M1 = date('m', time());
- // If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($POST[$prefix."_mo"] > "02")) $SWITCH = getConfig('one_day');
// First add years...
- $ret += $POST[$prefix."_ye"] * (31536000 + $SWITCH);
+ $ret += $postData[$prefix . '_ye'] * (31536000 + $SWITCH);
+
// Next months...
- $ret += $POST[$prefix."_mo"] * 2628000;
+ $ret += $postData[$prefix . '_mo'] * 2628000;
+
// Next weeks
- $ret += $POST[$prefix."_we"] * 604800;
+ $ret += $postData[$prefix . '_we'] * 604800;
+
// Next days...
- $ret += $POST[$prefix."_da"] * 86400;
+ $ret += $postData[$prefix . '_da'] * 86400;
+
// Next hours...
- $ret += $POST[$prefix."_ho"] * 3600;
+ $ret += $postData[$prefix . '_ho'] * 3600;
+
// Next minutes..
- $ret += $POST[$prefix."_mi"] * 60;
+ $ret += $postData[$prefix . '_mi'] * 60;
+
// And at last seconds...
- $ret += $POST[$prefix."_se"];
+ $ret += $postData[$prefix . '_se'];
+
// Return calculated value
return $ret;
}
-// Sends out mail to all administrators
-// IMPORTANT: Please use SEND_ADMIN_NOTIFCATION() for now!
-function SEND_ADMIN_EMAILS_PRO ($subj, $template, $content, $UID) {
- // Trim template name
- $template = trim($template);
-
- // Load email template
- $message = LOAD_EMAIL_TEMPLATE($template, $content, $UID);
-
- // Check which admin shall receive this mail
- $result = SQL_QUERY_ESC("SELECT DISTINCT admin_id FROM `{!_MYSQL_PREFIX!}_admins_mails` WHERE mail_template='%s' ORDER BY admin_id",
- array($template), __FUNCTION__, __LINE__);
- if (SQL_NUMROWS($result) == 0) {
- // Create new entry (to all admins)
- SQL_QUERY_ESC("INSERT INTO `{!_MYSQL_PREFIX!}_admins_mails` (admin_id, mail_template) VALUES (0, '%s')",
- array($template), __FUNCTION__, __LINE__);
- } else {
- // Load admin IDs...
- // @TODO This can be, somehow, rewritten
- $adminIds = array();
- while ($content = SQL_FETCHARRAY($result)) {
- $adminIds[] = $content['admin_id'];
- } // END - while
-
- // Free memory
- SQL_FREERESULT($result);
-
- // Init result
- $result = false;
-
- // "implode" IDs and query string
- $aid = implode(',', $adminIds);
- if ($aid == '-1') {
- if (EXT_IS_ACTIVE('events')) {
- // Add line to user events
- EVENTS_ADD_LINE($subj, $message, $UID);
- } else {
- // Log error for debug
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Extension 'events' missing: tpl=%s,subj=%s,UID=%s",
- $template,
- $subj,
- $UID
- ));
- }
- } elseif ($aid == '0') {
- // Select all email adresses
- $result = SQL_QUERY("SELECT email FROM `{!_MYSQL_PREFIX!}_admins` ORDER BY `id`",
- __FUNCTION__, __LINE__);
- } else {
- // If Admin-ID is not "to-all" select
- $result = SQL_QUERY_ESC("SELECT email FROM `{!_MYSQL_PREFIX!}_admins` WHERE id IN (%s) ORDER BY `id`",
- array($aid), __FUNCTION__, __LINE__);
- }
- }
-
- // Load email addresses and send away
- while ($content = SQL_FETCHARRAY($result)) {
- sendEmail($content['email'], $subj, $message);
- } // END - while
-
- // Free memory
- SQL_FREERESULT($result);
-}
-
// Creates a 'fancy' human-readable timestamp from a Uni* stamp
function createFancyTime ($stamp) {
// Get data array with years/months/weeks/days/...
foreach($data as $k => $v) {
if ($v > 0) {
// Value is greater than 0 "eval" data to return string
- $eval = "\$ret .= \", \".\$v.\" {--_".strtoupper($k)."--}\";";
- eval($eval);
+ eval('$ret .= ", ".$v." {--_' . strtoupper($k) . '--}";');
break;
} // END - if
} // END - foreach
$ret = substr($ret, 2);
} else {
// Zero seconds
- $ret = "0 {--_SECONDS--}";
+ $ret = '0 {--_SECONDS--}';
}
// Return fancy time string
return $ret;
}
-//
-function ADD_EMAIL_NAV ($PAGES, $offset, $show_form, $colspan, $return=false) {
- $SEP = ''; $TOP = '';
- if (!$show_form) {
- $TOP = " top2";
- $SEP = "<tr><td colspan=\"" . $colspan."\" class=\"seperator\"> </td></tr>";
- }
-
- $NAV = '';
- for ($page = 1; $page <= $PAGES; $page++) {
- // Is the page currently selected or shall we generate a link to it?
- if (($page == REQUEST_GET('page')) || ((!REQUEST_ISSET_GET('page')) && ($page == '1'))) {
- // Is currently selected, so only highlight it
- $NAV .= "<strong>-";
- } else {
- // Open anchor tag and add base URL
- $NAV .= "<a href=\"{!URL!}/modules.php?module=admin&what=" . getWhat()."&page=" . $page."&offset=" . $offset;
-
- // Add userid when we shall show all mails from a single member
- if ((REQUEST_ISSET_GET('uid')) && (bigintval(REQUEST_GET('uid')) > 0)) $NAV .= "&uid=".bigintval(REQUEST_GET('uid'));
-
- // Close open anchor tag
- $NAV .= "\">";
- }
- $NAV .= $page;
- if (($page == REQUEST_GET('page')) || ((!REQUEST_ISSET_GET('page')) && ($page == '1'))) {
- // Is currently selected, so only highlight it
- $NAV .= "-</strong>";
- } else {
- // Close anchor tag
- $NAV .= "</a>";
- }
-
- // Add seperator if we have not yet reached total pages
- if ($page < $PAGES) $NAV .= " | ";
- } // END - for
-
- // Define constants only once
- if (!defined('__NAV_OUTPUT')) {
- define('__NAV_OUTPUT' , $NAV);
- define('__NAV_COLSPAN', $colspan);
- define('__NAV_TOP' , $TOP);
- define('__NAV_SEP' , $SEP);
- } // END - if
-
- // Load navigation template
- $OUT = LOAD_TEMPLATE("admin_email_nav_row", true);
-
- if ($return === true) {
- // Return generated HTML-Code
- return $OUT;
- } else {
- // Output HTML-Code
- OUTPUT_HTML($OUT);
- }
-}
-
// Extract host from script name
function extractHostnameFromUrl (&$script) {
// Use default SERVER_URL by default... ;) So?
- $url = constant('SERVER_URL');
+ $url = getServerUrl();
// Is this URL valid?
if (substr($script, 0, 7) == 'http://') {
// Extract host name
$host = str_replace('http://', '', $url);
- if (ereg('/', $host)) $host = substr($host, 0, strpos($host, '/'));
+ if (isInString('/', $host)) $host = substr($host, 0, strpos($host, '/'));
// Generate relative URL
- //* DEBUG: */ print("SCRIPT=" . $script."<br />\n");
+ //* DEBUG: */ debugOutput('SCRIPT=' . $script);
if (substr(strtolower($script), 0, 7) == 'http://') {
// But only if http:// is in front!
$script = substr($script, (strlen($url) + 7));
- } elseif (substr(strtolower($script), 0, 8) == "https://") {
+ } elseif (substr(strtolower($script), 0, 8) == 'https://') {
// Does this work?!
$script = substr($script, (strlen($url) + 8));
}
- //* DEBUG: */ print("SCRIPT=" . $script."<br />\n");
+ //* DEBUG: */ debugOutput('SCRIPT=' . $script);
if (substr($script, 0, 1) == '/') $script = substr($script, 1);
// Return host name
}
// Send a GET request
-function sendGetRequest ($script) {
- // Compile the script name
- $script = COMPILE_CODE($script);
-
+function sendGetRequest ($script, $data = array()) {
// Extract host name from script
$host = extractHostnameFromUrl($script);
+ // Add data
+ $body = http_build_query($data, '', '&');
+
+ // Do we have a question-mark in the script?
+ if (strpos($script, '?') === false) {
+ // No, so first char must be question mark
+ $body = '?' . $body;
+ } else {
+ // Ok, add &
+ $body = '&' . $body;
+ }
+
+ // Add script data
+ $script .= $body;
+
+ // Remove trailed & to make it more conform
+ if (substr($script, -1, 1) == '&') $script = substr($script, 0, -1);
+
// Generate GET request header
- $request = "GET /" . trim($script) . " HTTP/1.1" . getConfig('HTTP_EOL');
- $request .= "Host: " . $host . getConfig('HTTP_EOL');
- $request .= "Referer: " . constant('URL') . "/admin.php" . getConfig('HTTP_EOL');
- if (defined('FULL_VERSION')) {
- $request .= "User-Agent: " . constant('TITLE') . '/' . constant('FULL_VERSION') . getConfig('HTTP_EOL');
+ $request = 'GET /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
+ $request .= 'Host: ' . $host . getConfig('HTTP_EOL');
+ $request .= 'Referer: ' . getUrl() . '/admin.php' . getConfig('HTTP_EOL');
+ if (isConfigEntrySet('FULL_VERSION')) {
+ $request .= 'User-Agent: ' . getTitle() . '/' . getFullVersion() . getConfig('HTTP_EOL');
} else {
- $request .= "User-Agent: " . constant('TITLE') . "/?.?.?" . getConfig('HTTP_EOL');
+ $request .= 'User-Agent: ' . getTitle() . '/' . getConfig('VERSION') . getConfig('HTTP_EOL');
}
- $request .= "Content-Type: text/plain" . getConfig('HTTP_EOL');
- $request .= "Cache-Control: no-cache" . getConfig('HTTP_EOL');
- $request .= "Connection: Close" . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
+ $request .= 'Accept: image/png,image/*;q=0.8,text/plain,text/html,*/*;q=0.5' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
+ $request .= 'Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0' . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
// Send the raw request
$response = sendRawRequest($host, $request);
// Is postData an array?
if (!is_array($postData)) {
// Abort here
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("postData is not an array. Type: %s", gettype($postData)));
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("postData is not an array. Type: %s", gettype($postData)));
return array('', '', '');
} // END - if
- // Compile the script name
- $script = COMPILE_CODE($script);
-
// Extract host name from script
$host = extractHostnameFromUrl($script);
- // Construct request
- $data = http_build_query($postData, '','&');
+ // Construct request body
+ $body = http_build_query($postData, '', '&');
// Generate POST request header
- $request = "POST /" . trim($script) . " HTTP/1.1" . getConfig('HTTP_EOL');
- $request .= "Host: " . $host . getConfig('HTTP_EOL');
- $request .= "Referer: " . constant('URL') . "/admin.php" . getConfig('HTTP_EOL');
- $request .= "User-Agent: " . constant('TITLE') . '/' . constant('FULL_VERSION') . getConfig('HTTP_EOL');
- $request .= "Content-type: application/x-www-form-urlencoded" . getConfig('HTTP_EOL');
- $request .= "Content-length: " . strlen($data) . getConfig('HTTP_EOL');
- $request .= "Cache-Control: no-cache" . getConfig('HTTP_EOL');
- $request .= "Connection: Close" . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
- $request .= $data;
+ $request = 'POST /' . trim($script) . ' HTTP/1.0' . getConfig('HTTP_EOL');
+ $request .= 'Host: ' . $host . getConfig('HTTP_EOL');
+ $request .= 'Referer: ' . getUrl() . '/admin.php' . getConfig('HTTP_EOL');
+ $request .= 'User-Agent: ' . getTitle() . '/' . getFullVersion() . getConfig('HTTP_EOL');
+ $request .= 'Accept: text/plain;q=0.8' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
+ $request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
+ $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
+ $request .= 'Content-Length: ' . strlen($body) . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
+
+ // Add body
+ $request .= $body;
// Send the raw request
$response = sendRawRequest($host, $request);
// Sends a raw request to another host
function sendRawRequest ($host, $request) {
// Init errno and errdesc with 'all fine' values
- $errno = 0; $errdesc = '';
+ $errno = '0'; $errdesc = '';
// Initialize array
$response = array('', '', '');
$useProxy = false;
// Are proxy settins set?
- if ((getConfig('proxy_host') != '') && (getConfig('proxy_port') > 0)) {
+ if (isProxyUsed()) {
// Then use it
$useProxy = true;
} // END - if
+ // Load include
+ loadIncludeOnce('inc/classes/resolver.class.php');
+
+ // Get resolver instance
+ $resolver = new HostnameResolver();
+
// Open connection
- //* DEBUG: */ die("SCRIPT=" . $script."<br />\n");
+ //* DEBUG: */ die('SCRIPT=' . $script);
if ($useProxy === true) {
+ // Resolve hostname into IP address
+ $ip = $resolver->resolveHostname(compileRawCode(getConfig('proxy_host')));
+
// Connect to host through proxy connection
- $fp = @fsockopen(COMPILE_CODE(getConfig('proxy_host')), bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
+ $fp = fsockopen($ip, bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
} else {
+ // Resolve hostname into IP address
+ $ip = $resolver->resolveHostname($host);
+
// Connect to host directly
- $fp = @fsockopen($host, 80, $errno, $errdesc, 30);
+ $fp = fsockopen($ip, 80, $errno, $errdesc, 30);
}
// Is there a link?
if (!is_resource($fp)) {
// Failed!
+ logDebugMessage(__FUNCTION__, __LINE__, $errdesc . ' (' . $errno . ')');
return $response;
- } // END - if
+ } elseif ((!stream_set_blocking($fp, 0)) || (!stream_set_timeout($fp, 1))) {
+ // Cannot set non-blocking mode or timeout
+ logDebugMessage(__FUNCTION__, __LINE__, socket_strerror(socket_last_error()));
+ return $response;
+ }
// Do we use proxy?
if ($useProxy === true) {
- // Generate CONNECT request header
- $proxyTunnel = "CONNECT " . $host . ":80 HTTP/1.1" . getConfig('HTTP_EOL');
- $proxyTunnel .= "Host: " . $host . getConfig('HTTP_EOL');
-
- // Use login data to proxy? (username at least!)
- if (getConfig('proxy_username') != '') {
- // Add it as well
- $encodedAuth = base64_encode(COMPILE_CODE(getConfig('proxy_username')) . getConfig('ENCRYPT_SEPERATOR') . COMPILE_CODE(getConfig('proxy_password')));
- $proxyTunnel .= "Proxy-Authorization: Basic " . $encodedAuth . getConfig('HTTP_EOL');
- } // END - if
-
- // Add last new-line
- $proxyTunnel .= getConfig('HTTP_EOL');
- //* DEBUG: */ print("<strong>proxyTunnel=</strong><pre>" . $proxyTunnel."</pre>");
-
- // Write request
- fputs($fp, $proxyTunnel);
+ // Setup proxy tunnel
+ $response = setupProxyTunnel($host, $fp);
- // Got response?
- if (feof($fp)) {
- // No response received
- return $response;
- } // END - if
-
- // Read the first line
- $resp = trim(fgets($fp, 10240));
- $respArray = explode(' ', $resp);
- if ((strtolower($respArray[0]) !== 'http/1.0') || ($respArray[1] != '200')) {
+ // If the response is invalid, abort
+ if ((count($response) == 3) && (empty($response[0])) && (empty($response[1])) && (empty($response[2]))) {
// Invalid response!
+ logDebugMessage(__FUNCTION__, __LINE__, 'Proxy tunnel not working?');
return $response;
} // END - if
} // END - if
// Write request
- fputs($fp, $request);
+ fwrite($fp, $request);
+
+ // Start counting
+ $start = microtime(true);
// Read response
while (!feof($fp)) {
- $response[] = trim(fgets($fp, 1024));
+ // Get info from stream
+ $info = stream_get_meta_data($fp);
+
+ // Is it timed out? 15 seconds is a really patient...
+ if (($info['timed_out'] == true) || (microtime(true) - $start) > 15) {
+ // Timeout
+ logDebugMessage(__FUNCTION__, __LINE__, 'Timed out to get data from host ' . $host);
+
+ // Abort here
+ break;
+ } // END - if
+
+ // Get line from stream
+ $line = fgets($fp, 128);
+
+ // Ignore empty lines because of non-blocking mode
+ if (empty($line)) {
+ // uslepp a little to avoid 100% CPU load
+ usleep(10);
+
+ // Skip this
+ continue;
+ } // END - if
+
+ // Add it to response
+ $response[] = trim($line);
} // END - while
// Close socket
fclose($fp);
+ // Time request if debug-mode is enabled
+ if (isDebugModeEnabled()) {
+ // Add debug message...
+ logDebugMessage(__FUNCTION__, __LINE__, 'Request took ' . (microtime(true) - $start) . ' seconds and returned ' . count($response) . ' line(s).');
+ } // END - if
+
// Skip first empty lines
$resp = $response;
foreach ($resp as $idx => $line) {
}
} // END - foreach
- //* DEBUG: */ print("<strong>Response:</strong><pre>".print_r($response, true)."</pre>");
+ //* DEBUG: */ debugOutput('<strong>Request:</strong><pre>'.print_r($request, true).'</pre>');
+ //* DEBUG: */ debugOutput('<strong>Response:</strong><pre>'.print_r($response, true).'</pre>');
- // Proxy agent found?
- if ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
+ // Proxy agent found or something went wrong?
+ if (!isset($response[0])) {
+ // No response, maybe timeout
+ $response = array('', '', '');
+ logDebugMessage(__FUNCTION__, __LINE__, 'Invalid empty response array, maybe timed out?');
+ } elseif ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
// Proxy header detected, so remove two lines
array_shift($response);
array_shift($response);
} // END - if
// Was the request successfull?
- if ((!eregi('200 OK', $response[0])) || (empty($response[0]))) {
+ if ((!isInStringIgnoreCase('200 OK', $response[0])) || (empty($response[0]))) {
// Not found / access forbidden
+ logDebugMessage(__FUNCTION__, __LINE__, 'Unexpected status code ' . $response[0] . ' detected. "200 OK" was expected.');
$response = array('', '', '');
} // END - if
return $response;
}
-// Taken from www.php.net eregi() user comments
-function isEmailValid ($email) {
- // Compile email
- $email = COMPILE_CODE($email);
+// Sets up a proxy tunnel for given hostname and through resource
+function setupProxyTunnel ($host, $resource) {
+ // Initialize array
+ $response = array('', '', '');
+
+ // Generate CONNECT request header
+ $proxyTunnel = 'CONNECT ' . $host . ':80 HTTP/1.0' . getConfig('HTTP_EOL');
+ $proxyTunnel .= 'Host: ' . $host . getConfig('HTTP_EOL');
+
+ // Use login data to proxy? (username at least!)
+ if (getConfig('proxy_username') != '') {
+ // Add it as well
+ $encodedAuth = base64_encode(compileRawCode(getConfig('proxy_username')) . ':' . compileRawCode(getConfig('proxy_password')));
+ $proxyTunnel .= 'Proxy-Authorization: Basic ' . $encodedAuth . getConfig('HTTP_EOL');
+ } // END - if
+
+ // Add last new-line
+ $proxyTunnel .= getConfig('HTTP_EOL');
+ //* DEBUG: */ debugOutput('<strong>proxyTunnel=</strong><pre>' . $proxyTunnel.'</pre>');
+
+ // Write request
+ fwrite($fp, $proxyTunnel);
+
+ // Got response?
+ if (feof($fp)) {
+ // No response received
+ return $response;
+ } // END - if
+
+ // Read the first line
+ $resp = trim(fgets($fp, 10240));
+ $respArray = explode(' ', $resp);
+ if ((strtolower($respArray[0]) !== 'http/1.0') || ($respArray[1] != '200')) {
+ // Invalid response!
+ return $response;
+ } // END - if
+
+ // All fine!
+ return $respArray;
+}
+// Taken from www.php.net isInStringIgnoreCase() user comments
+function isEmailValid ($email) {
// Check first part of email address
$first = '[-a-z0-9!#$%&\'*+/=?^_<{|}~]+(\.[-a-zA-Z0-9!#$%&\'*+/=?^_<{|}~]+)*';
$regex = '@^' . $first . '\@' . $domain . '$@iU';
// Return check result
- // @NOTE altered the regex-pattern and added modificator i (match both upper and lower case letters) and U (PCRE_UNGREEDY) to work with preg_match the same way as eregi
return preg_match($regex, $email);
}
-// Function taken from user comments on www.php.net / function eregi()
+// Function taken from user comments on www.php.net / function isInStringIgnoreCase()
function isUrlValid ($URL, $compile=true) {
// Trim URL a little
$URL = trim(urldecode($URL));
- //* DEBUG: */ echo $URL."<br />";
+ //* DEBUG: */ debugOutput($URL);
// Compile some chars out...
if ($compile === true) $URL = compileUriCode($URL, false, false, false);
- //* DEBUG: */ echo $URL."<br />";
+ //* DEBUG: */ debugOutput($URL);
// Check for the extension filter
- if (EXT_IS_ACTIVE('filter')) {
+ if (isExtensionActive('filter')) {
// Use the extension's filter set
return FILTER_VALIDATE_URL($URL, false);
} // END - if
return isUrlValidSimple($URL);
}
-// Generate a list of administrative links to a given userid
-function generateMemberAdminActionLinks ($uid, $status = '') {
- // Define all main targets
- $TARGETS = array('del_user', 'edit_user', 'lock_user', 'add_points', 'sub_points');
-
- // Begin of navigation links
- $eval = "\$OUT = \"[ ";
-
- foreach ($TARGETS as $tar) {
- $eval .= "<span class=\\\"admin_user_link\\\"><a href=\\\"{!URL!}/modules.php?module=admin&what=" . $tar."&uid=" . $uid."\\\" title=\\\"{--ADMIN_LINK_";
- //* DEBUG: */ echo "*" . $tar.'/' . $status."*<br />\n";
- if (($tar == "lock_user") && ($status == 'LOCKED')) {
- // Locked accounts shall be unlocked
- $eval .= "UNLOCK_USER";
- } else {
- // All other status is fine
- $eval .= strtoupper($tar);
- }
- $eval .= "_TITLE--}\\\">{--ADMIN_";
- if (($tar == "lock_user") && ($status == 'LOCKED')) {
- // Locked accounts shall be unlocked
- $eval .= "UNLOCK_USER";
- } else {
- // All other status is fine
- $eval .= strtoupper($tar);
- }
- $eval .= "--}</a></span> | ";
- }
-
- // Finish navigation link
- $eval = substr($eval, 0, -7)."]\";";
- eval($eval);
-
- // Return string
- return $OUT;
-}
-
-// Generate an email link
-function generateMemberEmailLink ($email, $table = 'admins') {
- // Default email link (INSECURE! Spammer can read this by harvester programs)
- $EMAIL = 'mailto:' . $email;
-
- // Check for several extensions
- if ((EXT_IS_ACTIVE('admins')) && ($table == 'admins')) {
- // Create email link for contacting admin in guest area
- $EMAIL = adminsCreateEmailLink($email);
- } elseif ((EXT_IS_ACTIVE('user')) && (GET_EXT_VERSION('user') >= '0.3.3') && ($table == 'user_data')) {
- // Create email link for contacting a member within admin area (or later in other areas, too?)
- $EMAIL = USER_generateMemberEmailLink($email);
- } elseif ((EXT_IS_ACTIVE('sponsor')) && ($table == 'sponsor_data')) {
- // Create email link to contact sponsor within admin area (or like the link above?)
- $EMAIL = SPONSOR_generateMemberEmailLink($email);
- }
-
- // Shall I close the link when there is no admin?
- if ((!IS_ADMIN()) && ($EMAIL == $email)) $EMAIL = '#'; // Closed!
-
- // Return email link
- return $EMAIL;
-}
-
// Generate a hash for extra-security for all passwords
-function generateHash ($plainText, $salt = '') {
+function generateHash ($plainText, $salt = '', $hash = true) {
+ // Debug output
+ //* DEBUG: */ debugOutput('plainText('.strlen($plainText).')=' . $plainText . ',salt('.strlen($salt).')=' . $salt . ',hash=' . intval($hash));
+
// Is the required extension 'sql_patches' there and a salt is not given?
- if (((EXT_VERSION_IS_OLDER('sql_patches', '0.3.6')) || (!EXT_IS_ACTIVE('sql_patches'))) && (empty($salt))) {
+ // 123 4 43 3 4 432 2 3 32 2 3 32 2 3 3 21
+ if (((isExtensionInstalledAndOlder('sql_patches', '0.3.6')) && (empty($salt))) || (!isExtensionActive('sql_patches')) || (!isExtensionInstalledAndNewer('other', '0.2.5')) || (strlen($salt) == 32)) {
// Extension sql_patches is missing/outdated so we hash the plain text with MD5
- return md5($plainText);
+ if ($hash === true) {
+ // Is plain password
+ return md5($plainText);
+ } else {
+ // Is already a hash
+ return $plainText;
+ }
} // END - if
// Do we miss an arry element here?
if (!isConfigEntrySet('file_hash')) {
// Stop here
- debug_report_bug('Missing file_hash in ' . __FUNCTION__ . '.');
+ debug_report_bug(__FUNCTION__, __LINE__, 'Missing file_hash in ' . __FUNCTION__ . '.');
} // END - if
// When the salt is empty build a new one, else use the first x configured characters as the salt
if (empty($salt)) {
- // Build server string (inc/databases.php is no longer updated with every commit)
- $server = $_SERVER['PHP_SELF'].getConfig('ENCRYPT_SEPERATOR').detectUserAgent().getConfig('ENCRYPT_SEPERATOR').getenv('SERVER_SOFTWARE').getConfig('ENCRYPT_SEPERATOR').detectRemoteAddr();
+ // Build server string for more entropy
+ $server = $_SERVER['PHP_SELF'] . getEncryptSeperator() . detectUserAgent() . getEncryptSeperator() . getenv('SERVER_SOFTWARE') . getEncryptSeperator() . detectRemoteAddr();
// Build key string
- $keys = getConfig('SITE_KEY').getConfig('ENCRYPT_SEPERATOR').getConfig('DATE_KEY').getConfig('ENCRYPT_SEPERATOR').getConfig('secret_key').getConfig('ENCRYPT_SEPERATOR').getConfig('file_hash').getConfig('ENCRYPT_SEPERATOR').date("d-m-Y (l-F-T)", getConfig(('patch_ctime'))).getConfig('ENCRYPT_SEPERATOR').getConfig('master_salt');
+ $keys = getConfig('SITE_KEY') . getEncryptSeperator() . getConfig('DATE_KEY') . getEncryptSeperator() . getSecretKey() . getEncryptSeperator() . getFileHash() . getEncryptSeperator() . getDateFromPatchTime() . getEncryptSeperator() . getMasterSalt();
// Additional data
- $data = $plainText.getConfig('ENCRYPT_SEPERATOR').uniqid(mt_rand(), true).getConfig('ENCRYPT_SEPERATOR').time();
+ $data = $plainText . getEncryptSeperator() . uniqid(mt_rand(), true) . getEncryptSeperator() . time();
// Calculate number for generating the code
$a = time() + getConfig('_ADD') - 1;
// Generate SHA1 sum from modula of number and the prime number
- $sha1 = sha1(($a % getConfig('_PRIME')) . $server.getConfig('ENCRYPT_SEPERATOR') . $keys.getConfig('ENCRYPT_SEPERATOR') . $data.getConfig('ENCRYPT_SEPERATOR').getConfig('DATE_KEY').getConfig('ENCRYPT_SEPERATOR') . $a);
- //* DEBUG: */ echo "SHA1=" . $sha1." (".strlen($sha1).")<br />";
+ $sha1 = sha1(($a % getPrime()) . $server . getEncryptSeperator() . $keys . getEncryptSeperator() . $data . getEncryptSeperator() . getConfig('DATE_KEY') . getEncryptSeperator() . $a);
+ //* DEBUG: */ debugOutput('SHA1=' . $sha1.' ('.strlen($sha1).')<br />');
$sha1 = scrambleString($sha1);
- //* DEBUG: */ echo "Scrambled=" . $sha1." (".strlen($sha1).")<br />";
+ //* DEBUG: */ debugOutput('Scrambled=' . $sha1.' ('.strlen($sha1).')<br />');
//* DEBUG: */ $sha1b = descrambleString($sha1);
- //* DEBUG: */ echo "Descrambled=" . $sha1b." (".strlen($sha1b).")<br />";
+ //* DEBUG: */ debugOutput('Descrambled=' . $sha1b.' ('.strlen($sha1b).')<br />');
// Generate the password salt string
- $salt = substr($sha1, 0, getConfig('salt_length'));
- //* DEBUG: */ echo $salt." (".strlen($salt).")<br />";
+ $salt = substr($sha1, 0, getSaltLength());
+ //* DEBUG: */ debugOutput($salt.' ('.strlen($salt).')<br />');
} else {
// Use given salt
- $salt = substr($salt, 0, getConfig('salt_length'));
- //* DEBUG: */ echo "GIVEN={$salt}<br />\n";
+ //* DEBUG: */ debugOutput('salt=' . $salt);
+ $salt = substr($salt, 0, getSaltLength());
+ //* DEBUG: */ debugOutput('salt=' . $salt . '(' . strlen($salt) . '/' . getSaltLength() . ')<br />');
+
+ // Sanity check on salt
+ if (strlen($salt) != getSaltLength()) {
+ // Not the same!
+ debug_report_bug(__FUNCTION__, __LINE__, 'salt length mismatch! ('.strlen($salt).'/'.getSaltLength().')');
+ } // END - if
}
+ // Generate final hash (for debug output)
+ $finalHash = $salt . sha1($salt . $plainText);
+
+ // Debug output
+ //* DEBUG: */ debugOutput('finalHash('.strlen($finalHash).')=' . $finalHash);
+
// Return hash
- return $salt.sha1($salt . $plainText);
+ return $finalHash;
}
// Scramble a string
-function scrambleString($str) {
+function scrambleString ($str) {
// Init
$scrambled = '';
return $str;
} elseif (strlen($str) == 40) {
// From database
- $scrambleNums = explode(':', getConfig('pass_scramble'));
+ $scrambleNums = explode(':', getPassScramble());
} else {
// Generate new numbers
$scrambleNums = explode(':', genScrambleString(strlen($str)));
}
+ // Compare both lengths and abort if different
+ if (strlen($str) != count($scrambleNums)) return $str;
+
// Scramble string here
- //* DEBUG: */ echo "***Original=" . $str."***<br />";
+ //* DEBUG: */ debugOutput('***Original=' . $str.'***<br />');
for ($idx = 0; $idx < strlen($str); $idx++) {
// Get char on scrambled position
$char = substr($str, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ echo "***Scrambled=" . $scrambled."***<br />";
+ //* DEBUG: */ debugOutput('***Scrambled=' . $scrambled.'***<br />');
return $scrambled;
}
// De-scramble a string scrambled by scrambleString()
-function descrambleString($str) {
+function descrambleString ($str) {
// Scramble only 40 chars long strings
if (strlen($str) != 40) return $str;
// Load numbers from config
- $scrambleNums = explode(':', getConfig('pass_scramble'));
+ $scrambleNums = explode(':', getPassScramble());
// Validate numbers
if (count($scrambleNums) != 40) return $str;
// Begin descrambling
- $orig = str_repeat(" ", 40);
- //* DEBUG: */ echo "+++Scrambled=" . $str."+++<br />";
+ $orig = str_repeat(' ', 40);
+ //* DEBUG: */ debugOutput('+++Scrambled=' . $str.'+++<br />');
for ($idx = 0; $idx < 40; $idx++) {
$char = substr($str, $idx, 1);
$orig = substr_replace($orig, $char, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ echo "+++Original=" . $orig."+++<br />";
+ //* DEBUG: */ debugOutput('+++Original=' . $orig.'+++<br />');
return $orig;
}
// Check for it by creating more numbers
while (array_key_exists($rand, $scrambleNumbers)) {
$rand = mt_rand(0, ($len -1));
- } // END - while
-
- // Add number
- $scrambleNumbers[$rand] = $rand;
- } // END - for
-
- // So let's create the string for storing it in database
- $scrambleString = implode(':', $scrambleNumbers);
- return $scrambleString;
-}
-
-// Generate an PGP-like encrypted hash of given hash for e.g. cookies
-function generatePassString ($passHash) {
- // Return vanilla password hash
- $ret = $passHash;
-
- // Is a secret key and master salt already initialized?
- if ((getConfig('secret_key') != '') && (getConfig('master_salt') != '')) {
- // Only calculate when the secret key is generated
- $newHash = ''; $start = 9;
- for ($idx = 0; $idx < 10; $idx++) {
- $part1 = hexdec(substr($passHash, $start, 4));
- $part2 = hexdec(substr(getConfig('secret_key'), $start, 4));
- $mod = dechex($idx);
- if ($part1 > $part2) {
- $mod = dechex(sqrt(($part1 - $part2) * getConfig('_PRIME') / pi()));
- } elseif ($part2 > $part1) {
- $mod = dechex(sqrt(($part2 - $part1) * getConfig('_PRIME') / pi()));
- }
- $mod = substr(round($mod), 0, 4);
- $mod = str_repeat('0', 4-strlen($mod)) . $mod;
- //* DEBUG: */ echo "*" . $start.'=' . $mod."*<br />";
- $start += 4;
- $newHash .= $mod;
- } // END - for
-
- //* DEBUG: */ print($passHash."<br />" . $newHash." (".strlen($newHash).')');
- $ret = generateHash($newHash, getConfig('master_salt'));
- //* DEBUG: */ print($ret."<br />\n");
- } else {
- // Hash it simple
- //* DEBUG: */ echo "--" . $passHash."--<br />\n";
- $ret = md5($passHash);
- //* DEBUG: */ echo "++" . $ret."++<br />\n";
- }
-
- // Return result
- return $ret;
-}
-
-// Fix "deleted" cookies
-function fixDeletedCookies ($cookies) {
- // Is this an array with entries?
- if ((is_array($cookies)) && (count($cookies) > 0)) {
- // Then check all cookies if they are marked as deleted!
- foreach ($cookies as $cookieName) {
- // Is the cookie set to "deleted"?
- if (getSession($cookieName) == 'deleted') {
- setSession($cookieName, '');
- } // END - if
- } // END - foreach
- } // END - if
-}
-
-// Output error messages in a fasioned way and die...
-function app_die ($F, $L, $message) {
- // Check if Script is already dieing and not let it kill itself another 1000 times
- if (!isset($GLOBALS['app_died'])) {
- // Make sure, that the script realy realy diese here and now
- $GLOBALS['app_died'] = true;
-
- // Load header
- loadIncludeOnce('inc/header.php');
-
- // Rewrite message for output
- $message = sprintf(getMessage('MXCHANGE_HAS_DIED'), basename($F), $L, $message);
-
- // Better log this message away
- DEBUG_LOG($F, $L, $message);
-
- // Load the message template
- LOAD_TEMPLATE('admin_settings_saved', false, $message);
-
- // Load footer
- loadIncludeOnce('inc/footer.php');
- } else {
- // Script tried to kill itself twice
- debug_report_bug('Script wanted to kill itself more than once! Raw message=' . $message . ', file/function=' . $F . ', line=' . $L);
- }
-}
-
-// Display parsing time and number of SQL queries in footer
-function displayParsingTime() {
- // Is the timer started?
- if (!isset($GLOBALS['startTime'])) {
- // Abort here
- return false;
- } // END - if
-
- // Get end time
- $endTime = microtime(true);
-
- // "Explode" both times
- $start = explode(' ', $GLOBALS['startTime']);
- $end = explode(' ', $endTime);
- $runTime = $end[0] - $start[0];
- if ($runTime < 0) $runTime = 0;
- $runTime = translateComma($runTime);
-
- // Prepare output
- $content = array(
- 'runtime' => $runTime,
- 'numSQLs' => (getConfig('sql_count') + 1),
- 'numTemplates' => (getConfig('num_templates') + 1)
- );
-
- // Load the template
- LOAD_TEMPLATE('show_timings', false, $content);
-}
-
-// Check wether a boolean constant is set
-// Taken from user comments in PHP documentation for function constant()
-function isBooleanConstantAndTrue ($constName) { // : Boolean
- // Failed by default
- $res = false;
-
- // In cache?
- if (isset($GLOBALS['cache_array']['const'][$constName])) {
- // Use cache
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-CACHE!<br />\n";
- $res = ($GLOBALS['cache_array']['const'][$constName] === true);
- } else {
- // Check constant
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-RESOLVE!<br />\n";
- if (defined($constName)) {
- // Found!
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-FOUND!<br />\n";
- $res = (constant($constName) === true);
- } // END - if
-
- // Set cache
- $GLOBALS['cache_array']['const'][$constName] = $res;
- }
- //* DEBUG: */ var_dump($res);
-
- // Return value
- return $res;
-}
-
-// Checks if a given apache module is loaded
-function isApacheModuleLoaded ($apacheModule) {
- // Check it and return result
- return (((function_exists('apache_get_modules')) && (in_array($apacheModule, apache_get_modules()))) || (!function_exists('apache_get_modules')));
-}
-
-// Get current theme name
-function getCurrentTheme() {
- // The default theme is 'default'... ;-)
- $ret = 'default';
-
- // Load default theme if not empty from configuration
- if (getConfig('default_theme') != '') $ret = getConfig('default_theme');
-
- if (!isSessionVariableSet('mxchange_theme')) {
- // Set default theme
- setSession('mxchange_theme', $ret);
- } elseif ((isSessionVariableSet('mxchange_theme')) && (GET_EXT_VERSION('sql_patches') >= '0.1.4')) {
- //die("<pre>".print_r($GLOBALS['cache_array']['themes'], true)."</pre>");
- // Get theme from cookie
- $ret = getSession('mxchange_theme');
-
- // Is it valid?
- if (getThemeId($ret) == 0) {
- // Fix it to default
- $ret = 'default';
- } // END - if
- } elseif ((!isInstalled()) && ((isInstalling()) || (getOutputMode() == true)) && ((REQUEST_ISSET_GET('theme')) || (REQUEST_ISSET_POST('theme')))) {
- // Prepare FQFN for checking
- $theme = sprintf("%stheme/%s/theme.php", constant('PATH'), REQUEST_GET('theme'));
-
- // Installation mode active
- if ((REQUEST_ISSET_GET('theme')) && (isFileReadable($theme))) {
- // Set cookie from URL data
- setSession('mxchange_theme', REQUEST_GET('theme'));
- } elseif (isFileReadable(sprintf("%stheme/%s/theme.php", constant('PATH'), SQL_ESCAPE(REQUEST_POST('theme'))))) {
- // Set cookie from posted data
- setSession('mxchange_theme', SQL_ESCAPE(REQUEST_POST('theme')));
- }
-
- // Set return value
- $ret = getSession('mxchange_theme');
- } else {
- // Invalid design, reset cookie
- setSession('mxchange_theme', $ret);
- }
-
- // Add (maybe) found theme.php file to inclusion list
- $INC = sprintf("theme/%s/theme.php", SQL_ESCAPE($ret));
-
- // Try to load the requested include file
- if (isIncludeReadable($INC)) ADD_INC_TO_POOL($INC);
-
- // Return theme value
- return $ret;
-}
-
-// Get id from theme
-function getThemeId ($name) {
- // Is the extension 'theme' installed?
- if (!EXT_IS_ACTIVE('theme')) {
- // Then abort here
- return 0;
- } // END - if
-
- // Default id
- $id = 0;
-
- // Is the cache entry there?
- if (isset($GLOBALS['cache_array']['themes']['id'][$name])) {
- // Get the version from cache
- $id = $GLOBALS['cache_array']['themes']['id'][$name];
-
- // Count up
- incrementConfigEntry('cache_hits');
- } elseif (GET_EXT_VERSION('cache') != '0.1.8') {
- // Check if current theme is already imported or not
- $result = SQL_QUERY_ESC("SELECT `id` FROM `{!_MYSQL_PREFIX!}_themes` WHERE theme_path='%s' LIMIT 1",
- array($name), __FUNCTION__, __LINE__);
-
- // Entry found?
- if (SQL_NUMROWS($result) == 1) {
- // Fetch data
- list($id) = SQL_FETCHROW($result);
- } // END - if
-
- // Free result
- SQL_FREERESULT($result);
- }
-
- // Return id
- return $id;
-}
-
-// Generates an error code from given account status
-function generateErrorCodeFromUserStatus ($status) {
- // @TODO The status should never be empty
- if (empty($status)) {
- // Something really bad happend here
- debug_report_bug(__FUNCTION__ . ': status is empty.');
- } // END - if
-
- // Default error code if unknown account status
- $errorCode = getCode('UNKNOWN_STATUS');
-
- // Generate constant name
- $constantName = sprintf("ID_%s", $status);
-
- // Is the constant there?
- if (isCodeSet($constantName)) {
- // Then get it!
- $errorCode = getCode($constantName);
- } else {
- // Unknown status
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown error status %s detected.", $status));
- }
-
- // Return error code
- return $errorCode;
-}
-
-// Function to search for the last modifified file
-function searchDirsRecursive ($dir, &$last_changed) {
- // Get dir as array
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):dir=" . $dir."<br />\n";
- // Does it match what we are looking for? (We skip a lot files already!)
- // RegexPattern to exclude ., .., .revision, .svn, debug.log or .cache in the filenames
- $excludePattern = '@(\.|\.\.|\.revision|\.svn|debug\.log|\.cache|config\.php)$@';
- $ds = getArrayFromDirectory($dir, '', true, false, $excludePattern);
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):ds[]=".count($ds)."<br />\n";
-
- // Walk through all entries
- foreach ($ds as $d) {
- // Generate proper FQFN
- $FQFN = str_replace("//", '/', constant('PATH') . $dir. '/'. $d);
-
- // Is it a file and readable?
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):FQFN={$FQFN}<br />\n";
- if (isDirectory($FQFN)) {
- // $FQFN is a directory so also crawl into this directory
- $newDir = $d;
- if (!empty($dir)) $newDir = $dir . '/'. $d;
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):DESCENT: " . $newDir."<br />\n";
- searchDirsRecursive($newDir, $last_changed);
- } elseif (isFileReadable($FQFN)) {
- // $FQFN is a filename and no directory
- $time = filemtime($FQFN);
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):File: " . $d." found. (".($last_changed['time'] - $time).")<br />\n";
- if ($last_changed['time'] < $time) {
- // This file is newer as the file before
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>) - NEWER!<br />\n";
- $last_changed['path_name'] = $FQFN;
- $last_changed['time'] = $time;
- } // END - if
- }
- } // END - foreach
-}
-
-// "Getter" for revision/version data
-function getActualVersion ($type = 'Revision') {
- // By default nothing is new... ;-)
- $new = false;
-
- if (EXT_IS_ACTIVE('cache')) {
- // Check if REQUEST_GET('check_revision_data') is setted (switch for manually rewrite the .revision-File)
- if (REQUEST_ISSET_GET('check_revision_data') && REQUEST_GET('check_revision_data') == 'yes') {
- // Force rebuild by URL parameter
- $new = true;
- } elseif ((
- !isset($GLOBALS['cache_array']['revision'][$type])
- ) || (
- count($GLOBALS['cache_array']['revision']) < 3
- ) || (
- !$GLOBALS['cache_instance']->loadCacheFile('revision')
- )) {
- // Out-dated cache
- $new = true;
- } // END - if
-
- // Is the cache file outdated/invalid?
- if ($new === true) {
- // Reload the cache file
- $GLOBALS['cache_instance']->loadCacheFile('revision');
-
- // Destroy cache file
- $GLOBALS['cache_instance']->destroyCacheFile(false, true);
-
- // @TODO shouldn't do the unset and the reloading $GLOBALS['cache_instance']->destroyCacheFile() Or a new methode like forceCacheReload('revision')?
- unset($GLOBALS['cache_array']['revision']);
-
- // Reload load_cach-revison.php
- loadInclude('inc/loader/load_cache-revision.php');
-
- // Abort here
- return;
- } // END - if
+ } // END - while
- // Return found value
- return $GLOBALS['cache_array']['revision'][$type][0];
- } else {
- // Old Version without ext-cache active (deprecated ?)
+ // Add number
+ $scrambleNumbers[$rand] = $rand;
+ } // END - for
- // FQFN of revision file
- $FQFN = sprintf("%sinc/cache/.revision", constant('PATH'));
+ // So let's create the string for storing it in database
+ $scrambleString = implode(':', $scrambleNumbers);
+ return $scrambleString;
+}
- // Check if REQUEST_GET('check_revision_data') is setted (switch for manually rewrite the .revision-File)
- if ((REQUEST_ISSET_GET('check_revision_data')) && (REQUEST_GET('check_revision_data') == 'yes')) {
- // Forced rebuild of .revision file
- $new = true;
- } else {
- // Check for revision file
- if (!isFileReadable($FQFN)) {
- // Not found, so we need to create it
- $new = true;
- } else {
- // Revision file found
- $ins_vers = explode("\n", readFromFile($FQFN));
+// Generate an PGP-like encrypted hash of given hash for e.g. cookies
+function encodeHashForCookie ($passHash) {
+ // Return vanilla password hash
+ $ret = $passHash;
- // Get array for mapping information
- $mapper = array_flip(getSearchFor());
- //* DEBUG: */ print("<pre>".print_r($mapper, true).print_r($ins_vers, true)."</pre>");
+ // Is a secret key and master salt already initialized?
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, intval(isExtensionInstalled('sql_patches')) . '/' . intval(isConfigEntrySet('_PRIME')) . '/' . intval(isConfigEntrySet('secret_key')) . '/' . intval(isConfigEntrySet('master_salt')));
+ if ((isExtensionInstalled('sql_patches')) && (isConfigEntrySet('_PRIME')) && (isConfigEntrySet('secret_key')) && (isConfigEntrySet('master_salt'))) {
+ // Only calculate when the secret key is generated
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '/' . strlen(getSecretKey()));
+ if ((strlen($passHash) != 49) || (strlen(getSecretKey()) != 40)) {
+ // Both keys must have same length so return unencrypted
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '!=49/' . strlen(getSecretKey()) . '!=40');
+ return $ret;
+ } // END - if
- // Is the content valid?
- if ((!is_array($ins_vers)) || (count($ins_vers) <= 0) || (!isset($ins_vers[$mapper[$type]])) || (trim($ins_vers[$mapper[$type]]) == '') || ($ins_vers[0]) == "new") {
- // File needs update!
- $new = true;
- } else {
- // Return found value
- return trim($ins_vers[$mapper[$type]]);
- }
+ $newHash = ''; $start = 9;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'passHash=' . $passHash . '(' . strlen($passHash) . ')');
+ for ($idx = 0; $idx < 20; $idx++) {
+ $part1 = hexdec(substr($passHash, ($idx * 2) + (strlen($passHash) - strlen(getSecretKey())), 2));
+ $part2 = hexdec(substr(getSecretKey(), $start, 2));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2);
+ $mod = dechex($idx);
+ if ($part1 > $part2) {
+ $mod = dechex(sqrt(($part1 - $part2) * getPrime() / pi()));
+ } elseif ($part2 > $part1) {
+ $mod = dechex(sqrt(($part2 - $part1) * getPrime() / pi()));
}
- }
-
- // Has it been updated?
- if ($new === true) {
- writeToFile($FQFN, implode("\n", getArrayFromActualVersion()));
- } // END - if
- }
-}
+ $mod = substr($mod, 0, 2);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2 . '/mod=' . $mod . '(' . strlen($mod) . ')');
+ $mod = str_repeat(0, (2 - strlen($mod))) . $mod;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'mod(' . ($idx * 2) . ')=' . $mod . '*');
+ $start += 2;
+ $newHash .= $mod;
+ } // END - for
-// Repares an array we are looking for
-// The returned Array is needed twice (in getArrayFromActualVersion() and in getActualVersion() in the old .revision-fallback) so I puted it in an extra function to not polute the global namespace
-function getSearchFor () {
- // Add Revision, Date, Tag and Author
- $searchFor = array('Revision', 'Date', 'Tag', 'Author');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, $passHash . ',' . $newHash . ' (' . strlen($newHash) . ')');
+ $ret = generateHash($newHash, getMasterSalt());
+ } // END - if
- // Return the created array
- return $searchFor;
+ // Return result
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'ret=' . $ret . '');
+ return $ret;
}
-// @TODO Please describe this function
-function getArrayFromActualVersion () {
- // Init variables
- $next_dir = ''; // Directory to start with search
- $last_changed = array(
- 'path_name' => '',
- 'time' => 0
- );
- $akt_vers = array(); // Init return array
- $res = 0; // Init value for counting the founded keywords
-
- // Searches all Files and there date of the last modifikation and puts the newest File in $last_changed.
- searchDirsRecursive($next_dir, $last_changed); // @TODO small change to API to $last_changed = searchDirsRecursive($next_dir, $time);
+// Fix "deleted" cookies
+function fixDeletedCookies ($cookies) {
+ // Is this an array with entries?
+ if ((is_array($cookies)) && (count($cookies) > 0)) {
+ // Then check all cookies if they are marked as deleted!
+ foreach ($cookies as $cookieName) {
+ // Is the cookie set to "deleted"?
+ if (getSession($cookieName) == 'deleted') {
+ setSession($cookieName, '');
+ } // END - if
+ } // END - foreach
+ } // END - if
+}
- // Get file
- $last_file = readFromFile($last_changed['path_name']);
+// Checks if a given apache module is loaded
+function isApacheModuleLoaded ($apacheModule) {
+ // Check it and return result
+ return (((function_exists('apache_get_modules')) && (in_array($apacheModule, apache_get_modules()))) || (!function_exists('apache_get_modules')));
+}
- // Get all the keywords to search for
- $searchFor = getSearchFor();
+// Get current theme name
+function getCurrentTheme () {
+ // The default theme is 'default'... ;-)
+ $ret = 'default';
- // This foreach loops the $searchFor-Tags (array('Revision', 'Date', 'Tag', 'Author') --> could easaly extended in the future)
- foreach ($searchFor as $search) {
- // Searches for "$search-tag:VALUE$" or "$search-tag::VALUE$"(the stylish keywordversion ;-)) in the lates modified file
- $res += preg_match('@\$' . $search.'(:|::) (.*) \$@U', $last_file, $t);
- // This trimms the search-result and puts it in the $akt_vers-return array
- if (isset($t[2])) $akt_vers[$search] = trim($t[2]);
- } // END - foreach
+ // Do we have ext-theme installed and active?
+ if (isExtensionActive('theme')) {
+ // Call inner method
+ $ret = getActualTheme();
+ } // END - if
- // Save the last-changed filename for debugging
- $akt_vers['File'] = $last_changed['path_name'];
+ // Return theme value
+ return $ret;
+}
- // at least 3 keyword-Tags are needed for propper values
- if ($res && $res >= 3
- && isset($akt_vers['Revision']) && $akt_vers['Revision'] != ''
- && isset($akt_vers['Date']) && $akt_vers['Date'] != ''
- && isset($akt_vers['Tag']) && $akt_vers['Tag'] != '') {
- // Prepare content witch need special treadment
+// Generates an error code from given account status
+function generateErrorCodeFromUserStatus ($status = '') {
+ // If no status is provided, use the default, cached
+ if ((empty($status)) && (isMember())) {
+ // Get user status
+ $status = getUserData('status');
+ } // END - if
- // Prepare timestamp for date
- preg_match('@(....)-(..)-(..) (..):(..):(..)@', $akt_vers['Date'], $match_d);
- $akt_vers['Date'] = mktime($match_d[4], $match_d[5], $match_d[6], $match_d[2], $match_d[3], $match_d[1]);
+ // Default error code if unknown account status
+ $errorCode = getCode('ACCOUNT_STATUS_UNKNOWN');
- // Add author to the Tag if the author is set and is not quix0r (lead coder)
- if ((isset($akt_vers['Author'])) && ($akt_vers['Author'] != "quix0r")) {
- $akt_vers['Tag'] .= '-'.strtoupper($akt_vers['Author']);
- } // END - if
+ // Generate constant name
+ $codeName = sprintf("ACCOUNT_STATUS_%s", strtoupper($status));
+ // Is the constant there?
+ if (isCodeSet($codeName)) {
+ // Then get it!
+ $errorCode = getCode($codeName);
} else {
- // No valid Data from the last modificated file so read the Revision from the Server. Fallback-solution!! Should not be removed I think.
- $version = sendGetRequest('check-updates3.php');
-
- // Prepare content
- // Only sets not setted or not proper values to the Online-Server-Fallback-Solution
- if (!isset($akt_vers['Revision']) || $akt_vers['Revision'] == '') $akt_vers['Revision'] = trim($version[10]);
- if (!isset($akt_vers['Date']) || $akt_vers['Date'] == '') $akt_vers['Date'] = trim($version[9]);
- if (!isset($akt_vers['Tag']) || $akt_vers['Tag'] == '') $akt_vers['Tag'] = trim($version[8]);
- if (!isset($akt_vers['Author']) || $akt_vers['Author'] == '') $akt_vers['Author'] = "quix0r";
+ // Unknown status
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown error status %s detected.", $status));
}
- // Return prepared array
- return $akt_vers;
+ // Return error code
+ return $errorCode;
}
// Back-ported from the new ship-simu engine. :-)
function debug_get_printable_backtrace () {
// Init variable
- $backtrace = "<ol>\n";
+ $backtrace = '<ol>';
// Get and prepare backtrace for output
$backtraceArray = debug_backtrace();
if (!isset($trace['file'])) $trace['file'] = __FUNCTION__;
if (!isset($trace['line'])) $trace['line'] = __LINE__;
if (!isset($trace['args'])) $trace['args'] = array();
- $backtrace .= "<li class=\"debug_list\"><span class=\"backtrace_file\">".basename($trace['file'])."</span>:" . $trace['line'].", <span class=\"backtrace_function\">" . $trace['function'].'('.count($trace['args']).")</span></li>\n";
+ $backtrace .= '<li class="debug_list"><span class="backtrace_file">' . basename($trace['file']) . '</span>:' . $trace['line'].", <span class=\"backtrace_function\">" . $trace['function'] . '(' . count($trace['args']) . ')</span></li>';
} // END - foreach
// Close it
- $backtrace .= "</ol>\n";
+ $backtrace .= '</ol>';
// Return the backtrace
return $backtrace;
}
-// Output a debug backtrace to the user
-function debug_report_bug ($message = '') {
- // Init message
- $debug = '';
- // Is the optional message set?
- if (!empty($message)) {
- // Use and log it
- $debug = sprintf("Note: %s<br />\n",
- $message
- );
-
- // @TODO Add a little more infos here
- DEBUG_LOG(__FUNCTION__, __LINE__, $message);
- } // END - if
+// A mail-able backtrace
+function debug_get_mailable_backtrace () {
+ // Init variable
+ $backtrace = '';
- // Add output
- $debug .= "Please report this bug at <a title=\"Direct link to the bug-tracker\" href=\"http://bugs.mxchange.org\" rel=\"external\" target=\"_blank\">bugs.mxchange.org</a> and include the logfile from <strong>inc/cache/debug.log</strong> in your report (you can now attach files):<pre>";
- $debug .= debug_get_printable_backtrace();
- $debug .= "</pre>\nRequest-URI: " . $_SERVER['REQUEST_URI']."<br />\n";
- $debug .= "Thank you for finding bugs.";
+ // Get and prepare backtrace for output
+ $backtraceArray = debug_backtrace();
+ foreach ($backtraceArray as $key => $trace) {
+ if (!isset($trace['file'])) $trace['file'] = __FUNCTION__;
+ if (!isset($trace['line'])) $trace['line'] = __LINE__;
+ if (!isset($trace['args'])) $trace['args'] = array();
+ $backtrace .= ($key+1) . '.:' . basename($trace['file']) . ':' . $trace['line'] . ', ' . $trace['function'] . '(' . count($trace['args']) . ")\n";
+ } // END - foreach
- // And abort here
- // @TODO This cannot be rewritten to app_die(), try to find a solution for this.
- die($debug);
+ // Return the backtrace
+ return $backtrace;
}
-// Generates a ***weak*** seed (taken from de.php.net/mt_srand)
+// Generates a ***weak*** seed
function generateSeed () {
- list($usec, $sec) = explode(' ', microtime());
- $microTime = (((float)$sec + (float)$usec)) * 100000;
- return $microTime;
+ return microtime(true) * 100000;
}
// Converts a message code to a human-readable message
-function convertCodeToMessage ($code) {
+function getMessageFromErrorCode ($code) {
$message = '';
switch ($code) {
- case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
- case getCode('LOGOUT_FAILED') : $message = "<span class=\"guest_failed\">{--LOGOUT_FAILED--}</span>"; break;
- case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
- case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
- case getCode('ACCOUNT_LOCKED') : $message = getMessage('MEMBER_ACCOUNT_LOCKED_UNC'); break;
- case getCode('USER_404') : $message = getMessage('USER_NOT_FOUND'); break;
- case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
- case getCode('ALREADY_CONFIRMED'): $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
+ case '': break;
+ case getCode('LOGOUT_DONE') : $message = '{--LOGOUT_DONE--}'; break;
+ case getCode('LOGOUT_FAILED') : $message = '<span class="guest_failed">{--LOGOUT_FAILED--}</span>'; break;
+ case getCode('DATA_INVALID') : $message = '{--MAIL_DATA_INVALID--}'; break;
+ case getCode('POSSIBLE_INVALID') : $message = '{--MAIL_POSSIBLE_INVALID--}'; break;
+ case getCode('USER_404') : $message = '{--USER_404--}'; break;
+ case getCode('STATS_404') : $message = '{--MAIL_STATS_404--}'; break;
+ case getCode('ALREADY_CONFIRMED') : $message = '{--MAIL_ALREADY_CONFIRMED--}'; break;
+ case getCode('WRONG_PASS') : $message = '{--LOGIN_WRONG_PASS--}'; break;
+ case getCode('WRONG_ID') : $message = '{--LOGIN_WRONG_ID--}'; break;
+ case getCode('ACCOUNT_LOCKED') : $message = '{--LOGIN_STATUS_LOCKED--}'; break;
+ case getCode('ACCOUNT_UNCONFIRMED'): $message = '{--LOGIN_STATUS_UNCONFIRMED--}'; break;
+ case getCode('COOKIES_DISABLED') : $message = '{--LOGIN_COOKIES_DISABLED--}'; break;
+ case getCode('BEG_SAME_AS_OWN') : $message = '{--BEG_SAME_UID_AS_OWN--}'; break;
+ case getCode('LOGIN_FAILED') : $message = '{--GUEST_LOGIN_FAILED_GENERAL--}'; break;
+ case getCode('MODULE_MEMBER_ONLY') : $message = getMaskedMessage('MODULE_MEMBER_ONLY', getRequestParameter('mod')); break;
+ case getCode('OVERLENGTH') : $message = '{--MEMBER_TEXT_OVERLENGTH--}'; break;
+ case getCode('URL_FOUND') : $message = '{--MEMBER_TEXT_CONTAINS_URL--}'; break;
+ case getCode('SUBJECT_URL') : $message = '{--MEMBER_SUBJECT_CONTAINS_URL--}'; break;
+ case getCode('BLIST_URL') : $message = '{--MEMBER_URL_BLACK_LISTED--}<br />{--MEMBER_BLIST_TIME--}: ' . generateDateTime(getRequestParameter('blist'), 0); break;
+ case getCode('NO_RECS_LEFT') : $message = '{--MEMBER_SELECTED_MORE_RECS--}'; break;
+ case getCode('INVALID_TAGS') : $message = '{--MEMBER_HTML_INVALID_TAGS--}'; break;
+ case getCode('MORE_POINTS') : $message = '{--MEMBER_MORE_POINTS_NEEDED--}'; break;
+ case getCode('MORE_RECEIVERS1') : $message = '{--MEMBER_ENTER_MORE_RECEIVERS--}'; break;
+ case getCode('MORE_RECEIVERS2') : $message = '{--MEMBER_NO_MORE_RECEIVERS_FOUND--}'; break;
+ case getCode('MORE_RECEIVERS3') : $message = '{--MEMBER_ENTER_MORE_MIN_RECEIVERS--}'; break;
+ case getCode('INVALID_URL') : $message = '{--MEMBER_ENTER_INVALID_URL--}'; break;
+ case getCode('NO_MAIL_TYPE') : $message = '{--MEMBER_NO_MAIL_TYPE_SELECTED--}'; break;
+ case getCode('UNKNOWN_ERROR') : $message = '{--LOGIN_UNKNOWN_ERROR--}'; break;
+ case getCode('UNKNOWN_STATUS') : $message = '{--LOGIN_UNKNOWN_STATUS--}'; break;
case getCode('ERROR_MAILID'):
- if (EXT_IS_ACTIVE($ext, true)) {
- $message = getMessage('ERROR_CONFIRMING_MAIL');
+ if (isExtensionActive('mailid', true)) {
+ $message = '{--ERROR_CONFIRMING_MAIL--}';
} else {
- $message = sprintf(getMessage('EXTENSION_PROBLEM_NOT_INSTALLED'), 'mailid');
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXTENSION_NOT_INSTALLED', 'mailid');
}
break;
case getCode('EXTENSION_PROBLEM'):
- if (REQUEST_ISSET_GET('ext')) {
- $message = generateExtensionInactiveNotInstalledMessage(REQUEST_GET('ext'));
+ if (isGetRequestParameterSet('ext')) {
+ $message = generateExtensionInactiveNotInstalledMessage(getRequestParameter('ext'));
} else {
- $message = getMessage('EXTENSION_PROBLEM_UNSET_EXT');
+ $message = '{--EXTENSION_PROBLEM_UNSET_EXT--}';
}
break;
- case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
- case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
- case getCode('MODULE_MEM_ONLY') : $message = sprintf(getMessage('MODULE_MEM_ONLY'), REQUEST_GET('mod')); break;
+ case getCode('URL_TLOCK'):
+ // @TODO Move this SQL code into a function, let's say 'getTimestampFromPoolId($id) ?
+ $result = SQL_QUERY_ESC("SELECT `timestamp` FROM `{?_MYSQL_PREFIX?}_pool` WHERE `id`=%s LIMIT 1",
+ array(bigintval(getRequestParameter('id'))), __FUNCTION__, __LINE__);
- default:
- // Missing/invalid code
- $message = sprintf(getMessage('UNKNOWN_MAILID_CODE'), $code);
+ // Load timestamp from last order
+ list($timestamp) = SQL_FETCHROW($result);
- // Log it
- DEBUG_LOG(__FUNCTION__, __LINE__, $message);
- break;
- } // END - switch
+ // Free memory
+ SQL_FREERESULT($result);
- // Return the message
- return $message;
-}
+ // Translate it for templates
+ $timestamp = generateDateTime($timestamp, 1);
-// Generate a "link" for the given admin id (aid)
-function generateAdminLink ($aid) {
- // No assigned admin is default
- $admin = "<span class=\"admin_note\">{--ADMIN_NO_ADMIN_ASSIGNED--}</span>";
+ // Calculate hours...
+ $STD = round(getConfig('url_tlock') / 60 / 60);
- // Zero? = Not assigned
- if (bigintval($aid) > 0) {
- // Load admin's login
- $login = getAdminLogin($aid);
+ // Minutes...
+ $MIN = round((getConfig('url_tlock') - $STD * 60 * 60) / 60);
- // Is the login valid?
- if ($login != '***') {
- // Is the extension there?
- if (EXT_IS_ACTIVE('admins')) {
- // Admin found
- $admin = "<a href=\"".adminsCreateEmailLink(getAdminEmail($aid))."\">" . $login."</a>";
- } else {
- // Extension not found
- $admin = sprintf(getMessage('EXTENSION_PROBLEM_NOT_INSTALLED'), 'admins');
- }
- } else {
- // Maybe deleted?
- $admin = "<div class=\"admin_note\">".sprintf(getMessage('ADMIN_ID_404'), $aid)."</div>";
- }
- } // END - if
+ // And seconds
+ $SEC = getConfig('url_tlock') - $STD * 60 * 60 - $MIN * 60;
- // Return result
- return $admin;
-}
+ // Finally contruct the message
+ // @TODO Rewrite this old lost code to a template
+ $message = '{--MEMBER_URL_TIME_LOCK--}<br />{--CONFIG_URL_TLOCK--} ' . $STD . '
+ {--_HOURS--}, ' . $MIN . ' {--_MINUTES--} {--_AND--} ' . $SEC . ' {--_SECONDS--}<br />
+ {--MEMBER_LAST_TLOCK--}: ' . $timestamp;
+ break;
-// Compile characters which are allowed in URLs
-function compileUriCode ($code, $simple=true) {
- // Compile constants
- if (!$simple) $code = str_replace('{--', '".', str_replace('--}', '."', $code));
+ default:
+ // Missing/invalid code
+ $message = getMaskedMessage('UNKNOWN_MAILID_CODE', $code);
- // Compile QUOT and other non-HTML codes
- $code = str_replace('{DOT}', '.',
- str_replace('{SLASH}', '/',
- str_replace('{QUOT}', "'",
- str_replace('{DOLLAR}', '$',
- str_replace('{OPEN_ANCHOR}', '(',
- str_replace('{CLOSE_ANCHOR}', ')',
- str_replace('{OPEN_SQR}', '[',
- str_replace('{CLOSE_SQR}', ']',
- str_replace('{PER}', '%',
- $code
- )))))))));
+ // Log it
+ logDebugMessage(__FUNCTION__, __LINE__, $message);
+ break;
+ } // END - switch
- // Return compiled code
- return $code;
+ // Return the message
+ return $message;
}
-// Function taken from user comments on www.php.net / function eregi()
+// Function taken from user comments on www.php.net / function isInStringIgnoreCase()
function isUrlValidSimple ($url) {
// Prepare URL
- $url = strip_tags(str_replace("\\", '', COMPILE_CODE(urldecode($url))));
+ $url = secureString(str_replace("\\", '', compileRawCode(urldecode($url))));
// Allows http and https
$http = "(http|https)+(:\/\/)";
$pattern['d1g12'] = $http . $domain1 . $getstring1;
$pattern['d2g12'] = $http . $domain2 . $getstring1;
$pattern['ipg12'] = $http . $ip . $getstring1;
+
// Test all patterns
$reg = false;
foreach ($pattern as $key => $pat) {
// Debug regex?
- if (isDebugRegExpressionEnabled()) {
+ if (isDebugRegularExpressionEnabled()) {
// @TODO Are these convertions still required?
- $pat = str_replace('.', "\.", $pat);
- $pat = str_replace('@', "\@", $pat);
- echo $key."= " . $pat . "<br />";
+ $pat = str_replace('.', '\.', $pat);
+ $pat = str_replace('@', '\@', $pat);
+ //* DEBUG: */ debugOutput($key . '= ' . $pat);
} // END - if
// Check if expression matches
- $reg = ($reg || preg_match(('^' . $pat.'^'), $url));
+ $reg = ($reg || preg_match(('^' . $pat . '^'), $url));
// Does it match?
if ($reg === true) break;
$tmp = $FQFN . '.tmp';
// Open the source file
- $fp = fopen($FQFN, 'r') or OUTPUT_HTML('<strong>READ:</strong> ' . $FQFN . "<br />\n");
+ $fp = fopen($FQFN, 'r') or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot read. file=' . basename($FQFN));
// Is the resource valid?
if (is_resource($fp)) {
// Open temporary file
- $fp_tmp = fopen($tmp, 'w') or OUTPUT_HTML('<strong>WRITE:</strong> ' . $tmp . "<br />\n");
+ $fp_tmp = fopen($tmp, 'w') or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot write. tmp=' . basename($tmp) . ',file=' . $FQFN);
// Is the resource again valid?
if (is_resource($fp_tmp)) {
+ // Mark temporary file as readable
+ $GLOBALS['file_readable'][$tmp] = true;
+
+ // Start reading
while (!feof($fp)) {
// Read from source file
$line = fgets ($fp, 1024);
- if (strpos($line, $search) > -1) { $next = 0; $found = true; }
+ if (strpos($line, $search) > -1) {
+ $next = '0';
+ $found = true;
+ } // END - if
if ($next > -1) {
if ($next === $seek) {
} else {
$next++;
}
- }
+ } // END - if
// Write to temp file
- fputs($fp_tmp, $line);
+ fwrite($fp_tmp, $line);
} // END - while
// Close temp file
copyFileVerified($tmp, $FQFN, 0644);
return removeFile($tmp);
} elseif ($found === false) {
- OUTPUT_HTML('<strong>CHANGE:</strong> 404!');
+ outputHtml('<strong>CHANGE:</strong> 404!');
} else {
- OUTPUT_HTML('<strong>TMP:</strong> UNDONE!');
+ outputHtml('<strong>TMP:</strong> UNDONE!');
}
}
} else {
// File not found, not readable or writeable
- OUTPUT_HTML('<strong>404:</strong> ' . $FQFN . '<br />');
+ debug_report_bug(__FUNCTION__, __LINE__, 'File not readable/writeable. file=' . basename($FQFN));
}
// An error was detected!
return false;
}
// Send notification to admin
-function sendAdminNotification ($subject, $templateName, $content=array(), $uid = '0') {
- if (GET_EXT_VERSION('admins') >= '0.4.1') {
+function sendAdminNotification ($subject, $templateName, $content=array(), $userid = '0') {
+ if ((isExtensionInstalledAndNewer('admins', '0.4.1')) && (function_exists('sendAdminsEmails'))) {
// Send new way
- SEND_ADMIN_EMAILS_PRO($subject, $templateName, $content, $uid);
+ sendAdminsEmails($subject, $templateName, $content, $userid);
} else {
// Send out out-dated way
- $message = LOAD_EMAIL_TEMPLATE($templateName, $content, $uid);
- SEND_ADMIN_EMAILS($subject, $message);
+ $message = loadEmailTemplate($templateName, $content, $userid);
+ sendAdminEmails($subject, $message);
}
}
// Debug message logger
-function DEBUG_LOG ($funcFile, $line, $message, $force=true) {
+function logDebugMessage ($funcFile, $line, $message, $force=true) {
// Is debug mode enabled?
if ((isDebugModeEnabled()) || ($force === true)) {
// Remove CRLF
$message = str_replace("\r", '', str_replace("\n", '', $message));
// Log this message away
- $fp = fopen(constant('PATH')."inc/cache/debug.log", 'a') or app_die(__FUNCTION__, __LINE__, "Cannot write logfile debug.log!");
- fwrite($fp, date("d.m.Y|H:i:s", time())."|" . getModule()."|".basename($funcFile)."|" . $line."|".strip_tags($message)."\n");
+ $fp = fopen(getCachePath() . 'debug.log', 'a') or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot write logfile debug.log!');
+ fwrite($fp, generateDateTime(time(), '4') . '|' . getModule(false) . '|' . basename($funcFile) . '|' . $line . '|' . $message . "\n");
fclose($fp);
} // END - if
}
-// Load more reset scripts
-function runResetIncludes () {
- // Is the reset set or old sql_patches?
- if ((!isResetModeEnabled()) || (EXT_VERSION_IS_OLDER('sql_patches', '0.4.5'))) {
- // Then abort here
- DEBUG_LOG(__FUNCTION__, __LINE__, "Cannot run reset! Please report this bug. Thanks");
- } // END - if
-
- // Get more daily reset scripts
- SET_INC_POOL(getArrayFromDirectory('inc/reset/', 'reset_'));
-
- // Update database
- if (getConfig('DEBUG_RESET') != 'Y') updateConfiguration('last_update', time());
-
- // Is the config entry set?
- if (GET_EXT_VERSION('sql_patches') >= '0.4.2') {
- // Create current week mark
- $currWeek = date('W', time());
-
- // Has it changed?
- if (getConfig('last_week') != $currWeek) {
- // Include weekly reset scripts
- MERGE_INC_POOL(getArrayFromDirectory('inc/weekly/', 'weekly_'));
-
- // Update config
- if (getConfig('DEBUG_WEEKLY') != 'Y') updateConfiguration('last_week', $currWeek);
- } // END - if
-
- // Create current month mark
- $currMonth = date('m', time());
-
- // Has it changed?
- if (getConfig('last_month') != $currMonth) {
- // Include monthly reset scripts
- MERGE_INC_POOL(getArrayFromDirectory('inc/monthly/', 'monthly_'));
-
- // Update config
- if (getConfig('DEBUG_MONTHLY') != 'Y') updateConfiguration('last_month', $currMonth);
- } // END - if
- } // END - if
-
- // Run the filter
- runFilterChain('load_includes');
-}
-
// Handle extra values
function handleExtraValues ($filterFunction, $value, $extraValue) {
// Default is the value itself
}
// Converts timestamp selections into a timestamp
-function convertSelectionsToTimestamp (&$POST, &$DATA, &$id, &$skip) {
+function convertSelectionsToTimestamp (&$postData, &$DATA, &$id, &$skip) {
// Init test variable
+ $skip = false;
$test2 = '';
// Get last three chars
if (in_array($test, array('_ye', '_mo', '_we', '_da', '_ho', '_mi', '_se'))) {
// Found a multi-selection for timings?
$test = substr($id, 0, -3);
- if ((isset($POST[$test.'_ye'])) && (isset($POST[$test.'_mo'])) && (isset($POST[$test.'_we'])) && (isset($POST[$test.'_da'])) && (isset($POST[$test.'_ho'])) && (isset($POST[$test.'_mi'])) && (isset($POST[$test.'_se'])) && ($test != $test2)) {
+ if ((isset($postData[$test.'_ye'])) && (isset($postData[$test.'_mo'])) && (isset($postData[$test.'_we'])) && (isset($postData[$test.'_da'])) && (isset($postData[$test.'_ho'])) && (isset($postData[$test.'_mi'])) && (isset($postData[$test.'_se'])) && ($test != $test2)) {
// Generate timestamp
- $POST[$test] = createTimestampFromSelections($test, $POST);
- $DATA[] = sprintf("%s='%s'", $test, $POST[$test]);
+ $postData[$test] = createTimestampFromSelections($test, $postData);
+ $DATA[] = sprintf("`%s`='%s'", $test, $postData[$test]);
+ $GLOBALS['skip_config'][$test] = true;
// Remove data from array
foreach (array('ye', 'mo', 'we', 'da', 'ho', 'mi', 'se') as $rem) {
- unset($POST[$test.'_' . $rem]);
+ unset($postData[$test . '_' . $rem]);
} // END - foreach
// Skip adding
- unset($id); $skip = true; $test2 = $test;
+ unset($id);
+ $skip = true;
+ $test2 = $test;
} // END - if
- } else {
- // Process this entry
- $skip = false;
- $test2 = '';
- }
+ } // END - if
}
// Reverts the german decimal comma into Computer decimal dot
}
// Handle menu-depending failed logins and return the rendered content
-function HANDLE_LOGIN_FAILTURES ($accessLevel) {
+function handleLoginFailures ($accessLevel) {
// Default output is empty ;-)
$OUT = '';
// Is the session data set?
- if ((isSessionVariableSet('mxchange_' . $accessLevel.'_failures')) && (isSessionVariableSet('mxchange_' . $accessLevel.'_last_fail'))) {
+ if ((isSessionVariableSet('mailer_' . $accessLevel . '_failures')) && (isSessionVariableSet('mailer_' . $accessLevel . '_last_failure'))) {
// Ignore zero values
- if (getSession('mxchange_' . $accessLevel.'_failures') > 0) {
+ if (getSession('mailer_' . $accessLevel . '_failures') > 0) {
// Non-guest has login failures found, get both data and prepare it for template
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):accessLevel={$accessLevel}<br />\n";
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'accessLevel=' . $accessLevel . '<br />');
$content = array(
- 'login_failures' => getSession('mxchange_' . $accessLevel.'_failures'),
- 'last_failure' => generateDateTime(getSession('mxchange_' . $accessLevel.'_last_fail'), '2')
+ 'login_failures' => 'mailer_' . $accessLevel . '_failures',
+ 'last_failure' => generateDateTime(getSession('mailer_' . $accessLevel . '_last_failure'), 2)
);
// Load template
- $OUT = LOAD_TEMPLATE('login_failures', true, $content);
+ $OUT = loadTemplate('login_failures', true, $content);
} // END - if
// Reset session data
- setSession('mxchange_' . $accessLevel.'_failures', '');
- setSession('mxchange_' . $accessLevel.'_last_fail', '');
+ setSession('mailer_' . $accessLevel . '_failures', '');
+ setSession('mailer_' . $accessLevel . '_last_failure', '');
} // END - if
// Return rendered content
}
// Rebuild cache
-function rebuildCacheFiles ($cache, $inc = '') {
+function rebuildCache ($cache, $inc = '', $force = false) {
+ // Debug message
+ /* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, sprintf("cache=%s, inc=%s, force=%s", $cache, $inc, intval($force)));
+
// Shall I remove the cache file?
- if ((EXT_IS_ACTIVE('cache')) && (isCacheInstanceValid())) {
+ if (isCacheInstanceValid()) {
// Rebuild cache
if ($GLOBALS['cache_instance']->loadCacheFile($cache)) {
// Destroy it
- $GLOBALS['cache_instance']->destroyCacheFile();
+ $GLOBALS['cache_instance']->removeCacheFile($force);
} // END - if
// Include file given?
if (!empty($inc)) {
// Construct FQFN
- $INC = sprintf("inc/loader/load_cache-%s.php", $inc);
+ $inc = sprintf("inc/loader/load_cache-%s.php", $inc);
// Is the include there?
- if (isIncludeReadable($INC)) {
+ if (isIncludeReadable($inc)) {
// And rebuild it from scratch
- //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): inc={$inc} - LOADED!<br />\n";
- loadInclude($INC);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "inc={$inc} - LOADED!<br />");
+ loadInclude($inc);
} else {
// Include not found!
- DEBUG_LOG(__FUNCTION__, __LINE__, "Include {$inc} not found. cache={$cache}");
+ logDebugMessage(__FUNCTION__, __LINE__, "Include {$inc} not found. cache={$cache}");
}
} // END - if
} // END - if
}
-// Purge admin menu cache
-function cachePurgeAdminMenu ($id=0, $action = '', $what = '', $str = '') {
- // Is the cache extension enabled or no cache instance or admin menu cache disabled?
- if (!EXT_IS_ACTIVE('cache')) {
- // Cache extension not active
- return false;
- } elseif (!isCacheInstanceValid()) {
- // No cache instance!
- DEBUG_LOG(__FUNCTION__, __LINE__, " No cache instance found.");
- return false;
- } elseif ((!isConfigEntrySet('cache_admin_menu')) || (getConfig('cache_admin_menu') != 'Y')) {
- // Caching disabled (currently experiemental!)
- return false;
- }
-
- // Experiemental feature!
- debug_report_bug("<strong>Experimental feature:</strong> You have to delete the admin_*.cache files by yourself at this point.");
-}
-
// Determines the real remote address
function determineRealRemoteAddress () {
// Is a proxy in use?
- if (isset($_SERVER['HTTP_X_FORWARDED_FOR'])){
+ if (isset($_SERVER['HTTP_X_FORWARDED_FOR'])) {
// Proxy was used
$address = $_SERVER['HTTP_X_FORWARDED_FOR'];
- } elseif (isset($_SERVER['HTTP_CLIENT_IP'])){
+ } elseif (isset($_SERVER['HTTP_CLIENT_IP'])) {
// Yet, another proxy
$address = $_SERVER['HTTP_CLIENT_IP'];
} else {
}
// This strips out the real address from proxy output
- if (strstr($address, ',')){
+ if (strstr($address, ',')) {
$addressArray = explode(',', $address);
$address = $addressArray[0];
} // END - if
if ((empty($mode)) && (isset($data['mode']))) $mode = $data['mode'];
// Generate receiver list
- $RECEIVER = generateReceiverList($data['cat'], $data['receiver'], $mode);
+ $receiver = generateReceiverList($data['cat'], $data['receiver'], $mode);
// Receivers added?
- if (!empty($RECEIVER)) {
+ if (!empty($receiver)) {
// Add bonus mail to queue
addBonusMailToQueue(
- $data['subject'],
- $data['text'],
- $RECEIVER,
- $data['points'],
- $data['seconds'],
- $data['url'],
- $data['cat'],
- $mode,
- $data['receiver']
+ $data['subject'],
+ $data['text'],
+ $receiver,
+ $data['points'],
+ $data['seconds'],
+ $data['url'],
+ $data['cat'],
+ $mode,
+ $data['receiver']
);
// Mail inserted into bonus pool
- if ($output) LOAD_TEMPLATE('admin_settings_saved', false, getMessage('ADMIN_BONUS_SEND'));
- } elseif ($output) {
+ if ($output === true) {
+ loadTemplate('admin_settings_saved', false, '{--ADMIN_BONUS_SEND--}');
+ } // END - if
+ } elseif ($output === true) {
// More entered than can be reached!
- LOAD_TEMPLATE('admin_settings_saved', false, getMessage('ADMIN_MORE_SELECTED'));
+ loadTemplate('admin_settings_saved', false, '{--ADMIN_MORE_SELECTED--}');
} else {
// Debug log
- DEBUG_LOG(__FUNCTION__, __LINE__, " cat={$data['cat']},receiver={$data['receiver']},data=".base64_encode(serialize($data))." More selected, than available!");
+ logDebugMessage(__FUNCTION__, __LINE__, 'cat=' . $data['cat'] . ',receiver=' . $data['receiver'] . ',data=' . base64_encode(serialize($data)) . ' More selected, than available!');
}
}
// Determines referal id and sets it
-function DETERMINE_REFID () {
+function determineReferalId () {
+ // Skip this in non-html-mode and outside ref.php
+ if ((getScriptOutputMode() != 0) && (basename($_SERVER['PHP_SELF']) != 'ref.php')) return false;
+
// Check if refid is set
- if ((REQUEST_ISSET_GET('user')) && (basename($_SERVER['PHP_SELF']) == 'click.php')) {
+ if ((isset($GLOBALS['refid'])) && ($GLOBALS['refid'] > 0)) {
+ // This is fine...
+ } elseif ((isGetRequestParameterSet('user')) && (basename($_SERVER['PHP_SELF']) == 'click.php')) {
// The variable user comes from the click-counter script click.php and we only accept this here
- $GLOBALS['refid'] = bigintval(REQUEST_GET('user'));
- } elseif (REQUEST_ISSET_POST('refid')) {
+ $GLOBALS['refid'] = bigintval(getRequestParameter('user'));
+ } elseif (isPostRequestParameterSet('refid')) {
// Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
- $GLOBALS['refid'] = strip_tags(REQUEST_POST('refid'));
- } elseif (REQUEST_ISSET_GET('refid')) {
+ $GLOBALS['refid'] = secureString(postRequestParameter('refid'));
+ } elseif (isGetRequestParameterSet('refid')) {
// Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
- $GLOBALS['refid'] = strip_tags(REQUEST_GET('refid'));
- } elseif (REQUEST_ISSET_GET('ref')) {
+ $GLOBALS['refid'] = secureString(getRequestParameter('refid'));
+ } elseif (isGetRequestParameterSet('ref')) {
// Set refid=ref (the referal link uses such variable)
- $GLOBALS['refid'] = strip_tags(REQUEST_GET('ref'));
- } elseif ((isSessionVariableSet('refid')) && (getSession('refid') != 0)) {
+ $GLOBALS['refid'] = secureString(getRequestParameter('ref'));
+ } elseif ((isSessionVariableSet('refid')) && (isValidUserId(getSession('refid')))) {
// Set session refid als global
$GLOBALS['refid'] = bigintval(getSession('refid'));
- } elseif ((GET_EXT_VERSION('sql_patches') != '') && (getConfig('def_refid') > 0)) {
- // Set default refid as refid in URL
- $GLOBALS['refid'] = getConfig(('def_refid'));
- } elseif ((GET_EXT_VERSION('user') >= '0.3.4') && (getConfig('select_user_zero_refid')) == 'Y') {
+ } elseif ((isExtensionInstalledAndNewer('user', '0.3.4')) && (isRandomReferalIdEnabled())) {
// Select a random user which has confirmed enougth mails
$GLOBALS['refid'] = determineRandomReferalId();
+ } elseif ((isExtensionInstalledAndNewer('sql_patches', '0.1.2')) && (isValidUserId(getConfig('def_refid')))) {
+ // Set default refid as refid in URL
+ $GLOBALS['refid'] = getConfig('def_refid');
} else {
- // No default ID when sql_patches is not installed or none set
- $GLOBALS['refid'] = 0;
+ // No default id when sql_patches is not installed or none set
+ $GLOBALS['refid'] = '0';
}
// Set cookie when default refid > 0
- if (!isSessionVariableSet('refid') || (!empty($GLOBALS['refid'])) || ((getSession('refid') == '0') && (getConfig('def_refid') > 0))) {
+ if (!isSessionVariableSet('refid') || (!empty($GLOBALS['refid'])) || ((!isValidUserId(getSession('refid'))) && (isConfigEntrySet('def_refid')) && (isValidUserId(getConfig('def_refid'))))) {
+ // Default is not found
+ $found = false;
+
+ // Do we have nickname or userid set?
+ if ((isExtensionActive('nickname')) && (isNicknameUsed($GLOBALS['refid']))) {
+ // Nickname in URL, so load the id
+ $found = fetchUserData($GLOBALS['refid'], 'nickname');
+ } elseif ($GLOBALS['refid'] > 0) {
+ // Direct userid entered
+ $found = fetchUserData($GLOBALS['refid']);
+ }
+
+ // Is the record valid?
+ if ((($found === false) || (!isUserDataValid())) && (isConfigEntrySet('def_refid'))) {
+ // No, then reset referal id
+ $GLOBALS['refid'] = getConfig('def_refid');
+ } // END - if
+
// Set cookie
setSession('refid', $GLOBALS['refid']);
} // END - if
return $GLOBALS['refid'];
}
-// Enables the reset mode. Only call this function if you really want the
-// reset to be run!
-function enableResetMode () {
+// Enables the reset mode and runs it
+function doReset () {
// Enable the reset mode
$GLOBALS['reset_enabled'] = true;
// Run filters
- runFilterChain('reset_enabled');
+ runFilterChain('reset');
}
// Our shutdown-function
function shutdown () {
// Call the filter chain 'shutdown'
- runFilterChain('shutdown', null, false);
+ runFilterChain('shutdown', null);
- if (SQL_IS_LINK_UP()) {
+ // Check if not in installation phase and the link is up
+ if ((!isInstallationPhase()) && (SQL_IS_LINK_UP())) {
// Close link
- SQL_CLOSE(__FILE__, __LINE__);
- } elseif ((!isInstalling()) && (isInstalled())) {
+ SQL_CLOSE(__FUNCTION__, __LINE__);
+ } elseif (!isInstallationPhase()) {
// No database link
- addFatalMessage(__FILE__, __LINE__, getMessage('NO_DB_LINK_SHUTDOWN'));
+ addFatalMessage(__FUNCTION__, __LINE__, '{--NO_DB_LINK_SHUTDOWN--}');
}
// Stop executing here
exit;
}
-// Setter for userid
-function setUserId ($userid) {
- $GLOBALS['userid'] = bigintval($userid);
+// Init member id
+function initMemberId () {
+ $GLOBALS['member_id'] = '0';
+}
+
+// Setter for member id
+function setMemberId ($memberid) {
+ // We should not set member id to zero
+ if ($memberid == '0') debug_report_bug(__FUNCTION__, __LINE__, 'Userid should not be set zero.');
+
+ // Set it secured
+ $GLOBALS['member_id'] = bigintval($memberid);
}
-// Getter for userid or returns zero
-function getUserId () {
- // Default userid
- $userid = 0;
+// Getter for member id or returns zero
+function getMemberId () {
+ // Default member id
+ $memberid = '0';
- // Is the userid set?
- if (isUserIdSet()) {
+ // Is the member id set?
+ if (isMemberIdSet()) {
// Then use it
- $userid = $GLOBALS['userid'];
+ $memberid = $GLOBALS['member_id'];
} // END - if
// Return it
- return $userid;
-}
-
-// Checks ether the userid is set
-function isUserIdSet () {
- return (isset($GLOBALS['userid']));
+ return $memberid;
}
-// Handle message codes from URL
-function handleCodeMessage () {
- if (REQUEST_ISSET_GET('msg')) {
- // Default extension is 'unknown'
- $ext = 'unknown';
-
- // Is extension given?
- if (REQUEST_ISSET_GET('ext')) $ext = REQUEST_GET('ext');
-
- // Convert the 'msg' parameter from URL to a human-readable message
- $message = convertCodeToMessage(REQUEST_GET('msg'));
-
- // Load message template
- LOAD_TEMPLATE('message', false, $message);
- } // END - if
+// Checks ether the member id is set
+function isMemberIdSet () {
+ return (isset($GLOBALS['member_id']));
}
// Setter for extra title
// Is the extra title set?
if (!isExtraTitleSet()) {
// No, then abort here
- debug_report_bug('extra_title is not set!');
+ debug_report_bug(__FUNCTION__, __LINE__, 'extra_title is not set!');
} // END - if
// Return it
return ((isset($GLOBALS['extra_title'])) && (!empty($GLOBALS['extra_title'])));
}
-// Generates a 'extension foo inactive' message
-function generateExtensionInactiveMessage ($ext_name) {
- // Is the extension empty?
- if (empty($ext_name)) {
- // This should not happen
- trigger_error(__FUNCTION__ . ': Parameter ext is empty. This should not happen.');
+// Reads a directory recursively by default and searches for files not matching
+// an exclusion pattern. You can now keep the exclusion pattern empty for reading
+// a whole directory.
+function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true, $suffix = '') {
+ // Add default entries we should exclude
+ $excludeArray[] = '.';
+ $excludeArray[] = '..';
+ $excludeArray[] = '.svn';
+ $excludeArray[] = '.htaccess';
+
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'baseDir=' . $baseDir . ',prefix=' . $prefix . ' - Entered!');
+ // Init includes
+ $files = array();
+
+ // Open directory
+ $dirPointer = opendir(getPath() . $baseDir) or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot read directory ' . basename($baseDir) . '.');
+
+ // Read all entries
+ while ($baseFile = readdir($dirPointer)) {
+ // Exclude '.', '..' and entries in $excludeArray automatically
+ if (in_array($baseFile, $excludeArray, true)) {
+ // Exclude them
+ //* DEBUG: */ debugOutput('excluded=' . $baseFile);
+ continue;
+ } // END - if
+
+ // Construct include filename and FQFN
+ $fileName = $baseDir . $baseFile;
+ $FQFN = getPath() . $fileName;
+
+ // Remove double slashes
+ $FQFN = str_replace('//', '/', $FQFN);
+
+ // Check if the base filenname matches an exclusion pattern and if the pattern is not empty
+ if ((!empty($excludePattern)) && (preg_match($excludePattern, $baseFile, $match))) {
+ // These Lines are only for debugging!!
+ //* DEBUG: */ debugOutput('baseDir:' . $baseDir);
+ //* DEBUG: */ debugOutput('baseFile:' . $baseFile);
+ //* DEBUG: */ debugOutput('FQFN:' . $FQFN);
+
+ // Exclude this one
+ continue;
+ } // END - if
+
+ // Skip also files with non-matching prefix genericly
+ if (($recursive === true) && (isDirectory($FQFN))) {
+ // Is a redirectory so read it as well
+ $files = merge_array($files, getArrayFromDirectory($baseDir . $baseFile . '/', $prefix, $fileIncludeDirs, $addBaseDir, $excludeArray, $extension, $excludePattern, $recursive));
+
+ // And skip further processing
+ continue;
+ } elseif (substr($baseFile, 0, strlen($prefix)) != $prefix) {
+ // Skip this file
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'Invalid prefix in file ' . $baseFile . ', prefix=' . $prefix);
+ continue;
+ } elseif ((!empty($suffix)) && (substr($baseFile, -(strlen($suffix . $extension)), (strlen($suffix . $extension))) != $suffix . $extension)) {
+ // Skip wrong suffix as well
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'Invalid suffix in file ' . $baseFile . ', suffix=' . $suffix);
+ continue;
+ } elseif (!isFileReadable($FQFN)) {
+ // Not readable so skip it
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File ' . $FQFN . ' is not readable!');
+ continue;
+ }
+
+ // Is the file a PHP script or other?
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'baseDir=' . $baseDir . ',prefix=' . $prefix . ',baseFile=' . $baseFile);
+ if ((substr($baseFile, -4, 4) == '.php') || (($fileIncludeDirs === true) && (isDirectory($FQFN)))) {
+ // Is this a valid include file?
+ if ($extension == '.php') {
+ // Remove both for extension name
+ $extName = substr($baseFile, strlen($prefix), -4);
+
+ // Is the extension valid and active?
+ if (isExtensionNameValid($extName)) {
+ // Then add this file
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'Extension entry ' . $baseFile . ' added.');
+ $files[] = $fileName;
+ } else {
+ // Add non-extension files as well
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'Regular entry ' . $baseFile . ' added.');
+ if ($addBaseDir === true) {
+ $files[] = $fileName;
+ } else {
+ $files[] = $baseFile;
+ }
+ }
+ } else {
+ // We found .php file but should not search for them, why?
+ debug_report_bug(__FUNCTION__, __LINE__, 'We should find files with extension=' . $extension . ', but we found a PHP script.');
+ }
+ } elseif (substr($baseFile, -4, 4) == $extension) {
+ // Other, generic file found
+ $files[] = $fileName;
+ }
+ } // END - while
+
+ // Close directory
+ closedir($dirPointer);
+
+ // Sort array
+ sort($files);
+
+ // Return array with include files
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, '- Left!');
+ return $files;
+}
+
+// Maps a module name into a database table name
+function mapModuleToTable ($moduleName) {
+ // Map only these, still lame code...
+ switch ($moduleName) {
+ // 'index' is the guest's menu
+ case 'index': $moduleName = 'guest'; break;
+ // ... and 'login' the member's menu
+ case 'login': $moduleName = 'member'; break;
+ // Anything else will not be mapped, silently.
+ } // END - switch
+
+ // Return result
+ return $moduleName;
+}
+
+// Add SQL debug data to array for later output
+function addSqlToDebug ($result, $sqlString, $timing, $F, $L) {
+ // Already executed?
+ if (isset($GLOBALS['debug_sqls'][$F][$L][$sqlString])) {
+ // Then abort here, we don't need to profile a query twice
+ return;
} // END - if
- // Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ // Remeber this as profiled (or not, but we don't care here)
+ $GLOBALS['debug_sqls'][$F][$L][$sqlString] = true;
- // Is an admin logged in?
- if (IS_ADMIN()) {
- // Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ // Do we have cache?
+ if (!isset($GLOBALS['debug_sql_available'])) {
+ // Check it and cache it in $GLOBALS
+ $GLOBALS['debug_sql_available'] = ((isConfigurationLoaded()) && (isDisplayDebugSqlEnabled()));
+ } // END - if
+
+ // Don't execute anything here if we don't need or ext-other is missing
+ if ($GLOBALS['debug_sql_available'] === false) {
+ return;
} // END - if
- // Return prepared message
- return $message;
+ // Generate record
+ $record = array(
+ 'num_rows' => SQL_NUMROWS($result),
+ 'affected' => SQL_AFFECTEDROWS(),
+ 'sql_str' => $sqlString,
+ 'timing' => $timing,
+ 'file' => basename($F),
+ 'line' => $L
+ );
+
+ // Add it
+ $GLOBALS['debug_sqls'][] = $record;
}
-// Generates a 'extension foo not installed' message
-function generateExtensionNotInstalledMessage ($ext_name) {
- // Is the extension empty?
- if (empty($ext_name)) {
- // This should not happen
- trigger_error(__FUNCTION__ . ': Parameter ext is empty. This should not happen.');
+// Initializes the cache instance
+function initCacheInstance () {
+ // Load include for CacheSystem class
+ loadIncludeOnce('inc/classes/cachesystem.class.php');
+
+ // Initialize cache system only when it's needed
+ $GLOBALS['cache_instance'] = new CacheSystem();
+ if ($GLOBALS['cache_instance']->getStatus() != 'done') {
+ // Failed to initialize cache sustem
+ addFatalMessage(__FUNCTION__, __LINE__, '(<font color="#0000aa">' . __LINE__ . '</font>): {--CACHE_CANNOT_INITIALIZE--}');
} // END - if
+}
- // Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+// Getter for message from array or raw message
+function getMessageFromIndexedArray ($message, $pos, $array) {
+ // Check if the requested message was found in array
+ if (isset($array[$pos])) {
+ // ... if yes then use it!
+ $ret = $array[$pos];
+ } else {
+ // ... else use default message
+ $ret = $message;
+ }
- // Is an admin logged in?
- if (IS_ADMIN()) {
- // Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
- } // END - if
+ // Return result
+ return $ret;
+}
- // Return prepared message
- return $message;
+// Convert ';' to ', ' for e.g. receiver list
+function convertReceivers ($old) {
+ return str_replace(';', ', ', $old);
}
-// Generates a message depending on if the extension is not installed or not
-// just activated
-function generateExtensionInactiveNotInstalledMessage ($ext_name) {
- // Init message
- $message = '';
+// Get a module from filename and access level
+function getModuleFromFileName ($file, $accessLevel) {
+ // Default is 'invalid';
+ $modCheck = 'invalid';
- // Is the extension not installed or just deactivated?
- switch (isExtensionInstalled($ext_name)) {
- case true; // Deactivated!
- $message = generateExtensionInactiveMessage($ext_name);
+ // @TODO This is still very static, rewrite it somehow
+ switch ($accessLevel) {
+ case 'admin':
+ $modCheck = 'admin';
break;
- case false; // Not installed!
- $message = generateExtensionNotInstalledMessage($ext_name);
+ case 'sponsor':
+ case 'guest':
+ case 'member':
+ $modCheck = getModule();
break;
- default: // Should not happen!
- DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid state of extension %s detected.", $ext_name));
- $message = sprintf("Invalid state of extension %s detected.", $ext_name);
+ default: // Unsupported file name / access level
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported file name=' . basename($file) . '/access level=' . $accessLevel);
break;
- } // END - switch
+ }
- // Return the message
- return $message;
+ // Return result
+ return $modCheck;
+}
+
+// Encodes an URL for adding session id, etc.
+function encodeUrl ($url, $outputMode = '0') {
+ // Do we have already have a PHPSESSID inside or view.php is called? Then abort here
+ if ((strpos($url, session_name()) !== false) || (getScriptOutputMode() == -3)) return $url;
+
+ // Do we have a valid session?
+ if (((!isset($GLOBALS['valid_session'])) || ($GLOBALS['valid_session'] === false) || (!isset($_COOKIE[session_name()]))) && (isSpider() === false)) {
+ // Invalid session
+ // Determine right seperator
+ $seperator = '&';
+ if (strpos($url, '?') === false) {
+ // No question mark
+ $seperator = '?';
+ } elseif ((getScriptOutputMode() != '0') || ($outputMode != '0')) {
+ // Non-HTML mode
+ $seperator = '&';
+ }
+
+ // Add it to URL
+ if (session_id() != '') {
+ $url .= $seperator . session_name() . '=' . session_id();
+ } // END - if
+ } // END - if
+
+ // Add {?URL?} ?
+ if ((substr($url, 0, strlen(getUrl())) != getUrl()) && (substr($url, 0, 7) != '{?URL?}') && (substr($url, 0, 7) != 'http://') && (substr($url, 0, 8) != 'https://')) {
+ // Add it
+ $url = '{?URL?}/' . $url;
+ } // END - if
+
+ // Return the URL
+ return $url;
+}
+
+// Simple check for spider
+function isSpider () {
+ // Get the UA
+ $userAgent = strtolower(detectUserAgent(true));
+
+ // It should not be empty, if so it is better a spider/bot
+ if (empty($userAgent)) return true;
+
+ // Is it a spider?
+ return ((strpos($userAgent, 'spider') !== false) || (strpos($userAgent, 'slurp') !== false) || (strpos($userAgent, 'bot') !== false) || (strpos($userAgent, 'archiver') !== false));
+}
+
+// Function to search for the last modified file
+function searchDirsRecursive ($dir, &$last_changed, $lookFor = 'Date') {
+ // Get dir as array
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dir=' . $dir);
+ // Does it match what we are looking for? (We skip a lot files already!)
+ // RegexPattern to exclude ., .., .revision, .svn, debug.log or .cache in the filenames
+ $excludePattern = '@(\.revision|\.svn|debug\.log|\.cache|config\.php)$@';
+
+ $ds = getArrayFromDirectory($dir, '', false, true, array(), '.php', $excludePattern);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'count(ds)='.count($ds));
+
+ // Walk through all entries
+ foreach ($ds as $d) {
+ // Generate proper FQFN
+ $FQFN = str_replace('//', '/', getPath() . $dir . '/' . $d);
+
+ // Is it a file and readable?
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dir=' . $dir . ',d=' . $d);
+ if (isFileReadable($FQFN)) {
+ // $FQFN is a readable file so extract the requested data from it
+ $check = extractRevisionInfoFromFile($FQFN, $lookFor);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File: ' . $d . ' found. check=' . $check);
+
+ // Is the file more recent?
+ if ((!isset($last_changed[$lookFor])) || ($last_changed[$lookFor] < $check)) {
+ // This file is newer as the file before
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'NEWER!');
+ $last_changed['path_name'] = $FQFN;
+ $last_changed[$lookFor] = $check;
+ } // END - if
+ } else {
+ // Not readable
+ /* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File: ' . $d . ' not readable or directory.');
+ }
+ } // END - foreach
+}
+
+// Handles the braces [] of a field (e.g. value of 'name' attribute)
+function handleFieldWithBraces ($field) {
+ // Are there braces [] at the end?
+ if (substr($field, -2, 2) == '[]') {
+ // Try to find one and replace it. I do it this way to allow easy
+ // extending of this code.
+ foreach (array('admin_list_builder_id_value') as $key) {
+ // Is the cache entry set?
+ if (isset($GLOBALS[$key])) {
+ // Insert it
+ $field = str_replace('[]', '[' . $GLOBALS[$key] . ']', $field);
+
+ // And abort
+ break;
+ } // END - if
+ } // END - foreach
+ } // END - if
+
+ // Return it
+ return $field;
+}
+
+// Converts a userid so it can be used in SQL queries
+function makeDatabaseUserId ($userid) {
+ // Is it a valid username?
+ if (isValidUserId($userid)) {
+ // Always secure it
+ $userid = bigintval($userid);
+ } else {
+ // Is not valid or zero
+ $userid = 'NULL';
+ }
+
+ // Return it
+ return $userid;
}
//////////////////////////////////////////////////
}
} // END - if
+if (!function_exists('http_build_query')) {
+ // Taken from documentation on www.php.net, credits to Marco K. (Germany) and some light mods by R.Haeder
+ function http_build_query($data, $prefix = '', $sep = '', $key = '') {
+ $ret = array();
+ foreach ((array)$data as $k => $v) {
+ if (is_int($k) && $prefix != null) {
+ $k = urlencode($prefix . $k);
+ } // END - if
+
+ if ((!empty($key)) || ($key === 0)) $k = $key . '[' . urlencode($k) . ']';
+
+ if (is_array($v) || is_object($v)) {
+ array_push($ret, http_build_query($v, '', $sep, $k));
+ } else {
+ array_push($ret, $k.'='.urlencode($v));
+ }
+ } // END - foreach
+
+ if (empty($sep)) $sep = ini_get('arg_separator.output');
+
+ return implode($sep, $ret);
+ }
+} // END - if
+
// [EOF]
?>