<?php
/************************************************************************
- * MXChange v0.2.1 Start: 08/25/2003 *
- * =============== Last change: 11/29/2005 *
+ * Mailer v0.2.1-FINAL Start: 08/25/2003 *
+ * =================== Last change: 11/29/2005 *
* *
* -------------------------------------------------------------------- *
* File : functions.php *
// The same as above... ^
outputRawCode($htmlCode);
- if ($newLine) print("\n");
+ if ($newLine === true) print("\n");
break;
default:
app_die(__FUNCTION__, __LINE__, '<strong>{--FATAL_ERROR--}:</strong> {--LANG_NO_RENDER_DIRECT--}');
break;
} // END - switch
- } elseif ((getPhpCaching() == 'on') && (isset($GLOBALS['footer_sent'])) && ($GLOBALS['footer_sent'] == 1)) {
- // Headers already sent?
- if (headers_sent()) {
- // Log this error
- logDebugMessage(__FUNCTION__, __LINE__, 'Headers already sent! We need debug backtrace here.');
-
- // Trigger an user error
- debug_report_bug('Headers are already sent!');
- } // END - if
-
+ } elseif ((getPhpCaching() == 'on') && ((!isset($GLOBALS['header'])) || (count($GLOBALS['header']) == 0))) {
// Output cached HTML code
$GLOBALS['output'] = ob_get_contents();
$GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
} // END - if
- // Compile and run finished rendered HTML code
- compileFinalOutput();
-
// Send all HTTP headers
sendHttpHeaders();
+ // Compile and run finished rendered HTML code
+ compileFinalOutput();
+
// Output code here, DO NOT REMOVE! ;-)
outputRawCode($GLOBALS['output']);
} elseif ((getConfig('OUTPUT_MODE') == 'render') && (!empty($GLOBALS['output']))) {
$GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
} // END - if
- // Compile and run finished rendered HTML code
- compileFinalOutput();
-
// Send all HTTP headers
sendHttpHeaders();
+ // Compile and run finished rendered HTML code
+ compileFinalOutput();
+
// Output code here, DO NOT REMOVE! ;-)
outputRawCode($GLOBALS['output']);
+ } else {
+ // And flush all headers
+ flushHeaders();
}
}
sendHeader('HTTP/1.1 200');
// General headers for no caching
- sendHeader('Expired: ' . $now); // RFC2616 - Section 14.21
+ sendHeader('Expires: ' . $now); // RFC2616 - Section 14.21
sendHeader('Last-Modified: ' . $now);
sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
sendHeader('Pragma: no-cache'); // HTTP/1.0
// Was that eval okay?
if (empty($newContent)) {
// Something went wrong!
- debug_report_bug('Evaluation error:<pre>' . linenumberCode($eval) . '</pre>');
+ debug_report_bug('Evaluation error:<pre>' . linenumberCode($eval) . '</pre>', false);
} // END - if
$GLOBALS['output'] = $newContent;
$cnt++;
} // END - while
+ // Compress it?
+ if (!empty($_SERVER['HTTP_ACCEPT_ENCODING']) && (strpos('gzip', $_SERVER['HTTP_ACCEPT_ENCODING']) !== null)) {
+ // Compress it for HTTP gzip
+ $GLOBALS['output'] = gzencode($GLOBALS['output'], 9, true);
+
+ // Add header
+ sendHeader('Content-Encoding: gzip');
+ } elseif (!empty($_SERVER['HTTP_ACCEPT_ENCODING']) && (strpos('deflate', $_SERVER['HTTP_ACCEPT_ENCODING']) !== null)) {
+ // Compress it for HTTP deflate
+ $GLOBALS['output'] = gzcompress($GLOBALS['output'], 9);
+
+ // Add header
+ sendHeader('Content-Encoding: deflate');
+ }
+
// Add final length
sendHeader('Content-Length: ' . strlen($GLOBALS['output']));
+
+ // Flush all headers
+ flushHeaders();
}
// Output the raw HTML code
function outputRawCode ($htmlCode) {
// Output stripped HTML code to avoid broken JavaScript code, etc.
- print($htmlCode);
+ print(str_replace('{BACK}', "\\", $htmlCode));
// Flush the output if only getPhpCaching() is not 'on'
if (getPhpCaching() != 'on') {
$GLOBALS['fatal_messages'][] = $message;
// Log fatal messages away
- debug_report_bug($message);
logDebugMessage($F, $L, 'Fatal error message: ' . $message);
}
// Do we have to compile the code?
$ret = '';
- if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{!') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false)) {
+ if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{!') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false) || (strpos($GLOBALS['tpl_content'], '{%') !== false)) {
// Normal HTML output?
if (getOutputMode() == '0') {
// Add surrounding HTML comments to help finding bugs faster
- $ret = "<!-- Template " . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . "<!-- Template " . $template . " - End -->\n";
+ $ret = '<!-- Template ' . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . '<!-- Template ' . $template . " - End -->\n";
// Prepare eval() command
$eval = '$ret = "' . compileCode(escapeQuotes($ret)) . '";';
} elseif (substr($template, 0, 3) == 'js_') {
// JavaScripts don't like entities and timings
- $eval = '$ret = decodeEntities("' . compileRawCode(escapeQuotes($GLOBALS['tpl_content'])) . '");';
+ $eval = '$ret = decodeEntities("' . compileRawCode(escapeJavaScriptQuotes($GLOBALS['tpl_content'])) . '");';
} else {
- // Prepare eval() command
- $eval = '$ret = "' . compileCode(escapeQuotes($GLOBALS['tpl_content'])) . '";';
+ // Prepare eval() command, other output doesn't like entities, maybe
+ $eval = '$ret = decodeEntities("' . compileRawCode(escapeQuotes($GLOBALS['tpl_content'])) . '");';
}
} else {
// Add surrounding HTML comments to help finding bugs faster
- $ret = "<!-- Template " . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . "<!-- Template " . $template . " - End -->\n";
- $eval = '$ret = "' . escapeQuotes($ret) . '";';
+ $ret = '<!-- Template ' . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . '<!-- Template ' . $template . " - End -->\n";
+ $eval = '$ret = "' . compileRawCode(escapeQuotes($ret)) . '";';
} // END - if
// Cache the eval() command here
eval($GLOBALS['template_eval'][$template]);
} elseif ((isAdmin()) || ((isInstalling()) && (!isInstalled()))) {
// Only admins shall see this warning or when installation mode is active
- $ret = '<br /><span class=\\"guest_failed\\">{--TEMPLATE_404--}</span><br />
+ $ret = '<br /><span class="guest_failed">{--TEMPLATE_404--}</span><br />
(' . $template . ')<br />
<br />
{--TEMPLATE_CONTENT--}
// Default is empty
$extraPath = '';
- // Check for admin/guest/member templates
- if (substr($template, 0, 6) == 'admin_') {
- // Admin template found
- $extraPath = 'admin/';
- } elseif (substr($template, 0, 6) == 'guest_') {
- // Guest template found
- $extraPath = 'guest/';
- } elseif (substr($template, 0, 7) == 'member_') {
- // Member template found
- $extraPath = 'member/';
- } elseif (substr($template, 0, 8) == 'install_') {
- // Installation template found
- $extraPath = 'install/';
- } elseif (substr($template, 0, 4) == 'ext_') {
- // Extension template found
- $extraPath = 'ext/';
- } elseif (substr($template, 0, 3) == 'la_') {
- // 'Logical-area' template found
- $extraPath = 'la/';
- } elseif (substr($template, 0, 3) == 'js_') {
- // JavaScript template found
- $extraPath = 'js/';
- } elseif (substr($template, 0, 5) == 'menu_') {
- // Menu template found
- $extraPath = 'menu/';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
+ // Do we have cache?
+ if (!isset($GLOBALS['extra_path'][$template])) {
+ // Check for admin/guest/member/etc. templates
+ if (substr($template, 0, 6) == 'admin_') {
+ // Admin template found
+ $extraPath = 'admin/';
+ } elseif (substr($template, 0, 6) == 'guest_') {
+ // Guest template found
+ $extraPath = 'guest/';
+ } elseif (substr($template, 0, 7) == 'member_') {
+ // Member template found
+ $extraPath = 'member/';
+ } elseif (substr($template, 0, 7) == 'select_') {
+ // Selection template found
+ $extraPath = 'select/';
+ } elseif (substr($template, 0, 8) == 'install_') {
+ // Installation template found
+ $extraPath = 'install/';
+ } elseif (substr($template, 0, 4) == 'ext_') {
+ // Extension template found
+ $extraPath = 'ext/';
+ } elseif (substr($template, 0, 3) == 'la_') {
+ // 'Logical-area' template found
+ $extraPath = 'la/';
+ } elseif (substr($template, 0, 3) == 'js_') {
+ // JavaScript template found
+ $extraPath = 'js/';
+ } elseif (substr($template, 0, 5) == 'menu_') {
+ // Menu template found
+ $extraPath = 'menu/';
+ } else {
+ // Test for extension
+ $test = substr($template, 0, strpos($template, '_'));
- // Probe for valid extension name
- if (isExtensionNameValid($test)) {
- // Set extra path to extension's name
- $extraPath = $test . '/';
- } // END - if
- }
+ // Probe for valid extension name
+ if (isExtensionNameValid($test)) {
+ // Set extra path to extension's name
+ $extraPath = $test . '/';
+ } // END - if
+ }
+
+ // Store it in cache
+ $GLOBALS['extra_path'][$template] = $extraPath;
+ } // END - if
// Return result
- return $extraPath;
+ return $GLOBALS['extra_path'][$template];
}
// Loads an email template and compiles it
-function loadEmailTemplate ($template, $content = array(), $UID = '0') {
+function loadEmailTemplate ($template, $content = array(), $userid = '0') {
global $DATA;
// Make sure all template names are lowercase!
// Default 'nickname' if extension is not installed
$nick = '---';
- // Prepare IP number and User Agent
- $REMOTE_ADDR = detectRemoteAddr();
- $HTTP_USER_AGENT = detectUserAgent();
-
- // Default admin
- $ADMIN = getConfig('MAIN_TITLE');
-
- // Is the admin logged in?
- if (isAdmin()) {
- // Get admin id
- $adminId = getCurrentAdminId();
-
- // Load Admin data
- $ADMIN = getAdminEmail($adminId);
- } // END - if
-
// Neutral email address is default
$email = getConfig('WEBMASTER');
- // Expiration in a nice output format
- // NOTE: Use $content[expiration] in your templates instead of $EXPIRATION
- if (getConfig('auto_purge') == '0') {
- // Will never expire!
- $EXPIRATION = getMessage('MAIL_WILL_NEVER_EXPIRE');
- } else {
- // Create nice date string
- $EXPIRATION = createFancyTime(getConfig('auto_purge'));
- }
-
// Is content an array?
if (is_array($content)) {
- // Add expiration to array, $EXPIRATION is now deprecated!
- $content['expiration'] = $EXPIRATION;
+ // Add expiration to array
+ if ((isConfigEntrySet('auto_purge')) && (getConfig('auto_purge') == '0')) {
+ // Will never expire!
+ $content['expiration'] = getMessage('MAIL_WILL_NEVER_EXPIRE');
+ } elseif (isConfigEntrySet('auto_purge')) {
+ // Create nice date string
+ $content['expiration'] = createFancyTime(getConfig('auto_purge'));
+ } else {
+ // Missing entry
+ $content['expiration'] = getMessage('MAIL_NO_CONFIG_AUTO_PURGE');
+ }
} // END - if
// Load user's data
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):UID={$UID},template={$template},content[]=".gettype($content).'<br />');
- if (($UID > 0) && (is_array($content))) {
+ //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):UID={$userid},template={$template},content[]=".gettype($content).'<br />');
+ if (($userid > 0) && (is_array($content))) {
// If nickname extension is installed, fetch nickname as well
- if (isNicknameUsed($UID)) {
+ if ((isExtensionActive('nickname')) && (isNicknameUsed($userid))) {
//* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NICKNAME!<br />");
// Load by nickname
- fetchUserData($UID, 'nickname');
+ fetchUserData($userid, 'nickname');
} else {
//* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NO-NICK!<br />");
/// Load by userid
- fetchUserData($UID);
+ fetchUserData($userid);
}
// Merge data if valid
if (isset($content['email'])) $email = $content['email'];
// Store email for some functions in global data array
- // @TODO Do only use $contentn, not $DATA or raw variables
+ // @TODO Do only use $content, not $DATA or raw variables
$DATA['email'] = $email;
// Base directory
// Is there some content?
if (empty($newContent)) {
// Compiling failed
- $newContent = "Compiler error for template {$template}!\nUncompiled content:\n" . $GLOBALS['tpl_content'];
+ $newContent = "Compiler error for template " . $template . " !\nUncompiled content:\n" . $GLOBALS['tpl_content'];
// Add last error if the required function exists
if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx.";
eval("\$toEmail = \"".compileRawCode(escapeQuotes($toEmail))."\";");
// Compile "MSG"
- eval("\$message = \"".compileRawCode(escapeQuotes($message))."\";");
+ eval("\$message = \"".str_replace('$', '$', compileRawCode(escapeQuotes($message)))."\";");
// Fix HTML parameter (default is no!)
if (empty($isHtml)) $isHtml = 'N';
if (isDebugModeEnabled()) {
// In debug mode we want to display the mail instead of sending it away so we can debug this part
outputHtml('<pre>
-Headers : ' . str_replace('<', '<', str_replace('>', '>', secureString(trim($mailHeader)))) . '
-To : ' . $toEmail . '
-Subject : ' . $subject . '
-Message : ' . $message . '
+Headers : ' . htmlentities(utf8_decode(trim($mailHeader))) . '
+To : ' . htmlentities(utf8_decode($toEmail)) . '
+Subject : ' . htmlentities(utf8_decode($subject)) . '
+Message : ' . htmlentities(utf8_decode($message)) . '
</pre>');
} elseif (($isHtml == 'Y') && (isExtensionActive('html_mail'))) {
// Send mail as HTML away
}
}
-// Check if legacy or PHPMailer command
+// Check to use wether legacy mail() command or PHPMailer class
// @TODO Rewrite this to an extension 'smtp'
// @private
function checkPhpMailerUsage() {
// Send out a raw email with PHPMailer class or legacy mail() command
function sendRawEmail ($toEmail, $subject, $message, $from) {
+ // Just compile all again, to put out all configs, etc.
+ eval('$toEmail = decodeEntities("' . compileRawCode(escapeQuotes($toEmail)) . '");');
+ eval('$subject = decodeEntities("' . compileRawCode(escapeQuotes($subject)) . '");');
+ eval('$message = decodeEntities("' . compileRawCode(escapeQuotes($message)) . '");');
+ eval('$from = decodeEntities("' . compileRawCode(escapeQuotes($from)) . '");');
+
// Shall we use PHPMailer class or legacy mode?
if (checkPhpMailerUsage()) {
// Use PHPMailer class with SMTP enabled
// Translates the "pool type" into human-readable
function translatePoolType ($type) {
// Default?type is unknown
- $translated = sprintf(getMessage('POOL_TYPE_UNKNOWN'), $type);
+ $translated = getMaskedMessage('POOL_TYPE_UNKNOWN', $type);
// Generate constant
$constName = sprintf("POOL_TYPE_%s", $type);
default:
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
- $ret = sprintf(getMessage('UNKNOWN_STATUS'), $status);
+ $ret = getMaskedMessage('UNKNOWN_STATUS', $status);
break;
} // END - switch
// Don't de-refer our own links!
if (substr($URL, 0, strlen(getConfig('URL'))) != getConfig('URL')) {
// De-refer this link
- $URL = '{?URL?}/modules.php?module=loader&url=' . encodeString(compileUriCode($URL));
+ $URL = '{%url=modules.php?module=loader&url=' . encodeString(compileUriCode($URL)) . '%}';
} // END - if
// Return link
// Generates an URL for the frametester
function generateFrametesterUrl ($URL) {
// Prepare frametester URL
- $frametesterUrl = sprintf("{?URL?}/modules.php?module=frametester&url=%s",
+ $frametesterUrl = sprintf("{%%url=modules.php?module=frametester&url=%s%%}",
encodeString(compileUriCode($URL))
);
// Generate XHTML code for the CAPTCHA
function generateCaptchaCode ($code, $type, $DATA, $userid) {
- return '<img border="0" alt="Code ' . $code . '" src="{?URL?}/mailid_top.php?userid=' . $userid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '" />';
+ return '<img border="0" alt="Code ' . $code . '" src="{%url=mailid_top.php?userid=' . $userid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '%}" />';
}
// Generates a timestamp (some wrapper for mktime())
// Redirects to an URL and if neccessarry extends it with own base URL
function redirectToUrl ($URL) {
// Compile out codes
- eval('$URL = "' . compileRawCode($URL) . '";');
-
- // Check if http(s):// is there
- if ((substr($URL, 0, 7) != 'http://') && (substr($URL, 0, 8) != 'https://')) {
- // Make all URLs full-qualified
- $URL = getConfig('URL') . '/' . $URL;
- } // END - if
-
- // Three different debug ways...
- //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
- //* DEBUG: */ die($URL);
+ eval('$URL = "' . compileRawCode(encodeUrl($URL)) . '";');
// Default 'rel' value is external, nofollow is evil from Google and hurts the Internet
$rel = ' rel="external"';
$rel = '';
} // END - if
- // Get output buffer
- $GLOBALS['output'] = ob_get_contents();
-
- // Clear it only if there is content
- if (!empty($GLOBALS['output'])) {
- clearOutputBuffer();
- } // END - if
+ // Three different ways to debug...
+ //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
+ //* DEBUG: */ die($URL);
// Simple probe for bots/spiders from search engines
- if ((strpos(detectUserAgent(), 'spider') !== false) || (strpos(detectUserAgent(), 'bot') !== false)) {
+ if (isSpider()) {
// Secure the URL against bad things such als HTML insertions and so on...
$URL = secureString($URL);
// Output new location link as anchor
outputHtml('<a href="' . $URL . '"' . $rel . '>' . $URL . '</a>');
} elseif (!headers_sent()) {
- //* DEBUG: */ debug_report_bug("URL={$URL}");
// Clear own output buffer
$GLOBALS['output'] = '';
} // END - if
// Start couting
- $startCompile = explode(' ', microtime());
+ $startCompile = microtime(true);
// Comile the code
$code = compileRawCode($code, $simple, $constants, $full);
// Get timing
- $compiled = explode(' ', microtime());
+ $compiled = microtime(true);
// Add timing
- $code .= '<!-- Compilation time: ' . ((($compiled[1] + $compiled[0]) - ($startCompile[1] + $startCompile[0])) * 1000). 'ms //-->';
+ $code .= '<!-- Compilation time: ' . (($compiled - $startCompile) * 1000). 'ms //-->';
// Return compiled code
return $code;
if ($constants === true) {
// BEFORE 0.2.1 : Language and data constants
// WITH 0.2.1+ : Only language constants
- $code = str_replace('{--', "\".getMessage('", str_replace('--}', "').\"", $code));
+ $code = str_replace('{--', "\" . getMessage('", str_replace('--}', "') . \"", $code));
// BEFORE 0.2.1 : Not used
// WITH 0.2.1+ : Data constants
- $code = str_replace('{!', "\".constant('", str_replace("!}", "').\"", $code));
+ $code = str_replace('{!', "\" . constant('", str_replace('!}', "') . \"", $code));
} // END - if
// Compile QUOT and other non-HTML codes
// Replace it in the code
//* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):key={$key},match={$match}<br />");
$newMatch = str_replace('[', "['", str_replace(']', "']", $match));
- $code = str_replace($match, "\"." . $newMatch.".\"", $code);
+ $code = str_replace($match, '".' . $newMatch . '."', $code);
$matchesFound[$key . '_' . $matches[4][$key]] = 1;
$matchesFound[$match] = 1;
} elseif (!isset($matchesFound[$match])) {
// Not yet replaced!
//* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):match={$match}<br />");
- $code = str_replace($match, "\"." . $match.".\"", $code);
+ $code = str_replace($match, '".' . $match . '."', $code);
$matchesFound[$match] = 1;
}
} // END - foreach
debug_report_bug('img_code ' . $img_code .' has invalid length. img_code()=' . strlen($img_code) . ' code_length=' . getConfig('code_length'));
} elseif ($headerSent === false) {
// Return an HTML code here
- return "<img src=\"{?URL?}/img.php?code=" . $img_code."\" alt=\"Image\" />\n";
+ return "<img src=\"{%url=img.php?code=" . $img_code."%}\" alt=\"Image\" />\n";
}
// Load image
}
// Create selection box or array of splitted timestamp
function createTimeSelections ($timestamp, $prefix = '', $display = '', $align = 'center', $return_array=false) {
+ // Do not continue if ONE_DAY is absend
+ if (!isConfigEntrySet('ONE_DAY')) {
+ // And return the timestamp itself or empty array
+ if ($return_array === true) {
+ return array();
+ } else {
+ return $timestamp;
+ }
+ } // END - if
+
// Calculate 2-seconds timestamp
$stamp = round($timestamp);
//* DEBUG: */ print("*" . $stamp.'/' . $timestamp."*<br />");
} else {
// Generate table
$OUT = "<div align=\"" . $align."\">\n";
- $OUT .= "<table border=\"0\" cellspacing=\"0\" cellpadding=\"0\" class=\"admin_table dashed\">\n";
+ $OUT .= "<table border=\"0\" cellspacing=\"0\" cellpadding=\"0\" class=\"timebox_table dashed\">\n";
$OUT .= "<tr>\n";
if (ereg('Y', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_YEARS--}</strong></td>\n";
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_YEARS--}</strong></td>\n";
}
if (ereg('M', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_MONTHS--}</strong></td>\n";
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_MONTHS--}</strong></td>\n";
}
- if (ereg("W", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_WEEKS--}</strong></td>\n";
+ if (ereg('W', $display) || (empty($display))) {
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_WEEKS--}</strong></td>\n";
}
- if (ereg("D", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_DAYS--}</strong></td>\n";
+ if (ereg('D', $display) || (empty($display))) {
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_DAYS--}</strong></td>\n";
}
- if (ereg("h", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_HOURS--}</strong></td>\n";
+ if (ereg('h', $display) || (empty($display))) {
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_HOURS--}</strong></td>\n";
}
if (ereg('m', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_MINUTES--}</strong></td>\n";
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_MINUTES--}</strong></td>\n";
}
- if (ereg("s", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_SECONDS--}</strong></td>\n";
+ if (ereg('s', $display) || (empty($display))) {
+ $OUT .= " <td align=\"center\" class=\"timebox_column bottom\"><div class=\"tiny\">{--_SECONDS--}</strong></td>\n";
}
$OUT .= "</tr>\n";
if (ereg('Y', $display) || (empty($display))) {
// Generate year selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ye\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_ye\" size=\"1\">\n";
for ($idx = '0'; $idx <= 10; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $Y) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_ye\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_ye" value="0" />';
}
if (ereg('M', $display) || (empty($display))) {
// Generate month selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mo\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_mo\" size=\"1\">\n";
for ($idx = '0'; $idx <= 11; $idx++)
{
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_mo\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_mo" value="0" />';
}
- if (ereg("W", $display) || (empty($display))) {
+ if (ereg('W', $display) || (empty($display))) {
// Generate week selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_we\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_we\" size=\"1\">\n";
for ($idx = '0'; $idx <= 4; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $W) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_we\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_we" value="0" />';
}
- if (ereg("D", $display) || (empty($display))) {
+ if (ereg('D', $display) || (empty($display))) {
// Generate day selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_da\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_da\" size=\"1\">\n";
for ($idx = '0'; $idx <= 31; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $D) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_da\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_da" value="0" />';
}
- if (ereg("h", $display) || (empty($display))) {
+ if (ereg('h', $display) || (empty($display))) {
// Generate hour selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ho\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_ho\" size=\"1\">\n";
for ($idx = '0'; $idx <= 23; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $h) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_ho\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_ho" value="0" />';
}
if (ereg('m', $display) || (empty($display))) {
// Generate minute selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mi\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_mi\" size=\"1\">\n";
for ($idx = '0'; $idx <= 59; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $m) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_mi\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_mi" value="0" />';
}
- if (ereg("s", $display) || (empty($display))) {
+ if (ereg('s', $display) || (empty($display))) {
// Generate second selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_se\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_se\" size=\"1\">\n";
for ($idx = '0'; $idx <= 59; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $s) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_se\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_se" value="0" />';
}
$OUT .= "</tr>\n";
$OUT .= "</table>\n";
$TEST = date('Y', time()) / 4;
$M1 = date('m', time());
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($postData[$prefix."_mo"] > "02")) $SWITCH = getConfig('ONE_DAY');
+ if ((floor($TEST) == $TEST) && ($M1 == '02') && ($postData[$prefix . '_mo'] > '02')) $SWITCH = getConfig('ONE_DAY');
// First add years...
- $ret += $postData[$prefix."_ye"] * (31536000 + $SWITCH);
+ $ret += $postData[$prefix . '_ye'] * (31536000 + $SWITCH);
// Next months...
- $ret += $postData[$prefix."_mo"] * 2628000;
+ $ret += $postData[$prefix . '_mo'] * 2628000;
// Next weeks
- $ret += $postData[$prefix."_we"] * 604800;
+ $ret += $postData[$prefix . '_we'] * 604800;
// Next days...
- $ret += $postData[$prefix."_da"] * 86400;
+ $ret += $postData[$prefix . '_da'] * 86400;
// Next hours...
- $ret += $postData[$prefix."_ho"] * 3600;
+ $ret += $postData[$prefix . '_ho'] * 3600;
// Next minutes..
- $ret += $postData[$prefix."_mi"] * 60;
+ $ret += $postData[$prefix . '_mi'] * 60;
// And at last seconds...
- $ret += $postData[$prefix."_se"];
+ $ret += $postData[$prefix . '_se'];
// Return calculated value
return $ret;
}
function addEmailNavigation ($PAGES, $offset, $show_form, $colspan, $return=false) {
$SEP = ''; $TOP = '';
if ($show_form === false) {
- $TOP = " top2";
+ $TOP = " top";
$SEP = "<tr><td colspan=\"" . $colspan."\" class=\"seperator\"> </td></tr>";
}
$NAV .= '<strong>-';
} else {
// Open anchor tag and add base URL
- $NAV .= '<a href="{?URL?}/modules.php?module=admin&what=' . getWhat() . '&page=' . $page . '&offset=' . $offset;
+ $NAV .= '<a href="{%url=modules.php?module=admin&what=' . getWhat() . '&page=' . $page . '&offset=' . $offset;
// Add userid when we shall show all mails from a single member
if ((isGetRequestElementSet('userid')) && (bigintval(getRequestElement('userid')) > 0)) $NAV .= '&userid=' . bigintval(getRequestElement('userid'));
// Close open anchor tag
- $NAV .= '">';
+ $NAV .= '%}">';
}
$NAV .= $page;
if (($page == getRequestElement('page')) || ((!isGetRequestElementSet('page')) && ($page == 1))) {
if (substr(strtolower($script), 0, 7) == 'http://') {
// But only if http:// is in front!
$script = substr($script, (strlen($url) + 7));
- } elseif (substr(strtolower($script), 0, 8) == "https://") {
+ } elseif (substr(strtolower($script), 0, 8) == 'https://') {
// Does this work?!
$script = substr($script, (strlen($url) + 8));
}
$host = extractHostnameFromUrl($script);
// Add data
- $scriptData = http_build_query($data, '', '&');
+ $body = http_build_query($data, '', '&');
// Do we have a question-mark in the script?
if (strpos($script, '?') === false) {
// No, so first char must be question mark
- $scriptData = '?' . $scriptData;
+ $body = '?' . $body;
} else {
// Ok, add &
- $scriptData = '&' . $scriptData;
+ $body = '&' . $body;
}
// Add script data
- $script .= $scriptData;
+ $script .= $body;
+
+ // Remove trailed & to make it more conform
+ if (substr($script, -1, 1) == '&') $script = substr($script, 0, -1);
// Generate GET request header
$request = 'GET /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
} else {
$request .= 'User-Agent: ' . getConfig('TITLE') . '/' . getConfig('VERSION') . getConfig('HTTP_EOL');
}
- $request .= 'Content-Type: text/plain' . getConfig('HTTP_EOL');
+ $request .= 'Accept: text/plain;q=0.8' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
$request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
- $request .= 'Connection: Close' . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
+ $request .= 'Content-Type: text/plain' . getConfig('HTTP_EOL');
+ $request .= 'Content-Length: 0' . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
// Send the raw request
$response = sendRawRequest($host, $request);
$host = extractHostnameFromUrl($script);
// Construct request
- $data = http_build_query($postData, '', '&');
+ $body = http_build_query($postData, '', '&');
// Generate POST request header
$request = 'POST /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
$request .= 'Host: ' . $host . getConfig('HTTP_EOL');
$request .= 'Referer: ' . getConfig('URL') . '/admin.php' . getConfig('HTTP_EOL');
$request .= 'User-Agent: ' . getConfig('TITLE') . '/' . getConfig('FULL_VERSION') . getConfig('HTTP_EOL');
- $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
- $request .= 'Content-length: ' . strlen($data) . getConfig('HTTP_EOL');
$request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
- $request .= 'Connection: Close' . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
- $request .= $data;
+ $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
+
+ // Add body
+ $request .= $body;
// Send the raw request
$response = sendRawRequest($host, $request);
//* DEBUG: */ die("SCRIPT=" . $script.'<br />');
if ($useProxy === true) {
// Connect to host through proxy connection
- $fp = @fsockopen(compileRawCode(getConfig('proxy_host')), bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
+ $fp = fsockopen(compileRawCode(getConfig('proxy_host')), bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
} else {
// Connect to host directly
- $fp = @fsockopen($host, 80, $errno, $errdesc, 30);
+ $fp = fsockopen($host, 80, $errno, $errdesc, 30);
}
// Is there a link?
if (!is_resource($fp)) {
// Failed!
+ logDebugMessage(__FUNCTION__, __LINE__, $errdesc . ' (' . $errno . ')');
return $response;
- } // END - if
+ } elseif ((!stream_set_blocking($fp, 0)) || (!stream_set_timeout($fp, 1))) {
+ // Cannot set non-blocking mode or timeout
+ logDebugMessage(__FUNCTION__, __LINE__, socket_strerror(socket_last_error()));
+ return $response;
+ }
// Do we use proxy?
if ($useProxy === true) {
// Generate CONNECT request header
- $proxyTunnel = "CONNECT " . $host . ":80 HTTP/1.1" . getConfig('HTTP_EOL');
- $proxyTunnel .= "Host: " . $host . getConfig('HTTP_EOL');
+ $proxyTunnel = 'CONNECT ' . $host . ':80 HTTP/1.1' . getConfig('HTTP_EOL');
+ $proxyTunnel .= 'Host: ' . $host . getConfig('HTTP_EOL');
// Use login data to proxy? (username at least!)
if (getConfig('proxy_username') != '') {
// Add it as well
$encodedAuth = base64_encode(compileRawCode(getConfig('proxy_username')) . getConfig('ENCRYPT_SEPERATOR') . compileRawCode(getConfig('proxy_password')));
- $proxyTunnel .= "Proxy-Authorization: Basic " . $encodedAuth . getConfig('HTTP_EOL');
+ $proxyTunnel .= 'Proxy-Authorization: Basic ' . $encodedAuth . getConfig('HTTP_EOL');
} // END - if
// Add last new-line
$proxyTunnel .= getConfig('HTTP_EOL');
- //* DEBUG: */ print("<strong>proxyTunnel=</strong><pre>" . $proxyTunnel."</pre>");
+ //* DEBUG: */ print('<strong>proxyTunnel=</strong><pre>' . $proxyTunnel.'</pre>');
// Write request
- fputs($fp, $proxyTunnel);
+ fwrite($fp, $proxyTunnel);
// Got response?
if (feof($fp)) {
} // END - if
// Write request
- fputs($fp, $request);
+ fwrite($fp, $request);
+
+ // Start counting
+ $start = microtime(true);
// Read response
while (!feof($fp)) {
- $response[] = trim(fgets($fp, 1024));
+ // Get info from stream
+ $info = stream_get_meta_data($fp);
+
+ // Is it timed out? 15 seconds is a really patient...
+ if (($info['timed_out'] == true) || (microtime(true) - $start) > 15) {
+ // Timeout
+ logDebugMessage(__FUNCTION__, __LINE__, 'Timed out to get data from host ' . $host);
+
+ // Abort here
+ break;
+ } // END - if
+
+ // Get line from stream
+ $line = fgets($fp, 128);
+
+ // Ignore empty lines because of non-blocking mode
+ if (empty($line)) {
+ // uslepp a little to avoid 100% CPU load
+ usleep(10);
+
+ // Skip this
+ continue;
+ } // END - if
+
+ // Add it to response
+ $response[] = trim($line);
} // END - while
// Close socket
fclose($fp);
+ // Time request if debug-mode is enabled
+ if (isDebugModeEnabled()) {
+ // Add debug message...
+ logDebugMessage(__FUNCTION__, __LINE__, 'Request took ' . (microtime(true) - $start) . ' seconds.');
+ } // END - if
+
// Skip first empty lines
$resp = $response;
foreach ($resp as $idx => $line) {
}
} // END - foreach
- //* DEBUG: */ print("<strong>Response:</strong><pre>".print_r($response, true)."</pre>");
+ //* DEBUG: */ print('<strong>Response:</strong><pre>'.print_r($response, true).'</pre>');
- // Proxy agent found?
- if ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
+ // Proxy agent found or something went wrong?
+ if (!isset($response[0])) {
+ // No response, maybe timeout
+ $response = array('', '', '');
+ } elseif ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
// Proxy header detected, so remove two lines
array_shift($response);
array_shift($response);
$targetArray = array('del_user', 'edit_user', 'lock_user', 'add_points', 'sub_points');
// Begin of navigation links
- $OUT = "[ ";
+ $OUT = '[ ';
foreach ($targetArray as $tar) {
- $OUT .= "<span class=\"admin_user_link\"><a href=\"{?URL?}/modules.php?module=admin&what=" . $tar . "&userid=" . $userid . "\" title=\"{--ADMIN_LINK_";
- //* DEBUG: */ outputHtml("*" . $tar.'/' . $status."*<br />");
+ $OUT .= '<span class="admin_user_link"><a href="{%url=modules.php?module=admin&what=' . $tar . '&userid=' . $userid . '%}" title="{--ADMIN_LINK_';
+ //* DEBUG: */ outputHtml('*' . $tar.'/' . $status.'*<br />');
if (($tar == 'lock_user') && ($status == 'LOCKED')) {
// Locked accounts shall be unlocked
$OUT .= 'UNLOCK_USER';
// All other status is fine
$OUT .= strtoupper($tar);
}
- $OUT .= "_TITLE--}\">{--ADMIN_";
+ $OUT .= '_TITLE--}">{--ADMIN_';
if (($tar == 'lock_user') && ($status == 'LOCKED')) {
// Locked accounts shall be unlocked
$OUT .= 'UNLOCK_USER';
// All other status is fine
$OUT .= strtoupper($tar);
}
- $OUT .= "--}</a></span> | ";
+ $OUT .= '--}</a></span> | ';
}
// Finish navigation link
// Generate SHA1 sum from modula of number and the prime number
$sha1 = sha1(($a % getConfig('_PRIME')) . $server . getConfig('ENCRYPT_SEPERATOR') . $keys . getConfig('ENCRYPT_SEPERATOR') . $data . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY') . getConfig('ENCRYPT_SEPERATOR') . $a);
- //* DEBUG: */ outputHtml("SHA1=" . $sha1." (".strlen($sha1).")<br />");
+ //* DEBUG: */ outputHtml('SHA1=' . $sha1.' ('.strlen($sha1).')<br />');
$sha1 = scrambleString($sha1);
- //* DEBUG: */ outputHtml("Scrambled=" . $sha1." (".strlen($sha1).")<br />");
+ //* DEBUG: */ outputHtml('Scrambled=' . $sha1.' ('.strlen($sha1).')<br />');
//* DEBUG: */ $sha1b = descrambleString($sha1);
- //* DEBUG: */ outputHtml("Descrambled=" . $sha1b." (".strlen($sha1b).")<br />");
+ //* DEBUG: */ outputHtml('Descrambled=' . $sha1b.' ('.strlen($sha1b).')<br />');
// Generate the password salt string
$salt = substr($sha1, 0, getConfig('salt_length'));
- //* DEBUG: */ outputHtml($salt." (".strlen($salt).")<br />");
+ //* DEBUG: */ outputHtml($salt.' ('.strlen($salt).')<br />');
} else {
// Use given salt
//* DEBUG: */ print 'salt=' . $salt . '<br />';
$scrambleNums = explode(':', genScrambleString(strlen($str)));
}
+ // Compare both lengths and abort if different
+ if (strlen($str) != count($scrambleNums)) return $str;
+
// Scramble string here
- //* DEBUG: */ outputHtml("***Original=" . $str."***<br />");
+ //* DEBUG: */ outputHtml('***Original=' . $str.'***<br />');
for ($idx = '0'; $idx < strlen($str); $idx++) {
// Get char on scrambled position
$char = substr($str, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ outputHtml("***Scrambled=" . $scrambled."***<br />");
+ //* DEBUG: */ outputHtml('***Scrambled=' . $scrambled.'***<br />');
return $scrambled;
}
// Begin descrambling
$orig = str_repeat(' ', 40);
- //* DEBUG: */ outputHtml("+++Scrambled=" . $str."+++<br />");
+ //* DEBUG: */ outputHtml('+++Scrambled=' . $str.'+++<br />');
for ($idx = '0'; $idx < 40; $idx++) {
$char = substr($str, $idx, 1);
$orig = substr_replace($orig, $char, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ outputHtml("+++Original=" . $orig."+++<br />");
+ //* DEBUG: */ outputHtml('+++Original=' . $orig.'+++<br />');
return $orig;
}
$message = sprintf(getMessage('MXCHANGE_HAS_DIED'), basename($F), $L, $message);
// Better log this message away
- logDebugMessage($F, $L, $message);
+ if ($F != 'debug_report_bug') logDebugMessage($F, $L, $message);
// Load the message template
- loadTemplate('admin_settings_saved', false, $message);
+ loadTemplate('app_die_message', false, $message);
// Load footer
loadIncludeOnce('inc/footer.php');
// The default theme is 'default'... ;-)
$ret = 'default';
- // Load default theme if not empty from configuration
- if ((isConfigEntrySet('default_theme')) && (getConfig('default_theme') != '')) $ret = getConfig('default_theme');
-
- if (!isSessionVariableSet('mxchange_theme')) {
- // Set default theme
- setTheme($ret);
- } elseif ((isSessionVariableSet('mxchange_theme')) && (isExtensionInstalledAndNewer('sql_patches', '0.1.4'))) {
- //die("<pre>".print_r($GLOBALS['cache_array']['themes'], true)."</pre>");
- // Get theme from cookie
- $ret = getSession('mxchange_theme');
-
- // Is it valid?
- if (getThemeId($ret) == '0') {
- // Fix it to default
- $ret = 'default';
- } // END - if
- } elseif ((!isInstalled()) && ((isInstalling()) || (getOutputMode() == true)) && ((isGetRequestElementSet('theme')) || (isPostRequestElementSet('theme')))) {
- // Prepare FQFN for checking
- $theme = sprintf("%stheme/%s/theme.php", getConfig('PATH'), getRequestElement('theme'));
-
- // Installation mode active
- if ((isGetRequestElementSet('theme')) && (isFileReadable($theme))) {
- // Set cookie from URL data
- setTheme(getRequestElement('theme'));
- } elseif (isFileReadable(sprintf("%stheme/%s/theme.php", getConfig('PATH'), secureString(postRequestElement('theme'))))) {
- // Set cookie from posted data
- setTheme(secureString(postRequestElement('theme')));
- }
-
- // Set return value
- $ret = getSession('mxchange_theme');
- } else {
- // Invalid design, reset cookie
- setTheme($ret);
- }
+ // Do we have ext-theme installed and active?
+ if (isExtensionActive('theme')) {
+ // Call inner method
+ $ret = getActualTheme();
+ } // END - if
// Return theme value
return $ret;
}
-// Setter for theme in session
-function setTheme ($newTheme) {
- setSession('mxchange_theme', $newTheme);
-}
-
-// Get id from theme
-// @TODO Try to move this to inc/libs/theme_functions.php
-function getThemeId ($name) {
- // Is the extension 'theme' installed?
- if (!isExtensionActive('theme')) {
- // Then abort here
- return 0;
- } // END - if
-
- // Default id
- $id = '0';
-
- // Is the cache entry there?
- if (isset($GLOBALS['cache_array']['themes']['id'][$name])) {
- // Get the version from cache
- $id = $GLOBALS['cache_array']['themes']['id'][$name];
-
- // Count up
- incrementStatsEntry('cache_hits');
- } elseif (getExtensionVersion('cache') != '0.1.8') {
- // Check if current theme is already imported or not
- $result = SQL_QUERY_ESC("SELECT `id` FROM `{?_MYSQL_PREFIX?}_themes` WHERE `theme_path`='%s' LIMIT 1",
- array($name), __FUNCTION__, __LINE__);
-
- // Entry found?
- if (SQL_NUMROWS($result) == 1) {
- // Fetch data
- list($id) = SQL_FETCHROW($result);
- } // END - if
-
- // Free result
- SQL_FREERESULT($result);
- }
-
- // Return id
- return $id;
-}
-
// Generates an error code from given account status
function generateErrorCodeFromUserStatus ($status='') {
// If no status is provided, use the default, cached
$errorCode = getCode('UNKNOWN_STATUS');
// Generate constant name
- $codeName = sprintf("ID_%s", $status);
+ $codeName = sprintf("ACCOUNT_%s", strtoupper($status));
// Is the constant there?
if (isCodeSet($codeName)) {
$new = true;
} else {
// Generate fake cache entry
- foreach ($mapper as $map=>$idx) {
+ foreach ($mapper as $map => $idx) {
$GLOBALS['cache_array']['revision'][$map][0] = $ins_vers[$idx];
} // END - foreach
return $backtrace;
}
+// A mail-able backtrace
+function debug_get_mailable_backtrace () {
+ // Init variable
+ $backtrace = '';
+
+ // Get and prepare backtrace for output
+ $backtraceArray = debug_backtrace();
+ foreach ($backtraceArray as $key => $trace) {
+ if (!isset($trace['file'])) $trace['file'] = __FUNCTION__;
+ if (!isset($trace['line'])) $trace['line'] = __LINE__;
+ if (!isset($trace['args'])) $trace['args'] = array();
+ $backtrace .= ($key+1) . '.:' . basename($trace['file']) . ':' . $trace['line'] . ', ' . $trace['function'] . '(' . count($trace['args']) . ")\n";
+ } // END - foreach
+
+ // Return the backtrace
+ return $backtrace;
+}
+
// Output a debug backtrace to the user
-function debug_report_bug ($message = '') {
+function debug_report_bug ($message = '', $sendEmail = true) {
// Is this already called?
if (isset($GLOBALS[__FUNCTION__])) {
// Other backtrace
} // END - if
// Add output
- $debug .= "Please report this bug at <a title=\"Direct link to the bug-tracker\" href=\"http://bugs.mxchange.org\" rel=\"external\" target=\"_blank\">bugs.mxchange.org</a> and include the logfile from <strong>" . getConfig('CACHE_PATH') . "debug.log</strong> in your report (you can now attach files):<pre>";
+ $debug .= "Please report this bug at <a title=\"Direct link to the bug-tracker\" href=\"http://bugs.mxchange.org\" rel=\"external\" target=\"_blank\">http://bugs.mxchange.org</a> and include the logfile from <strong>" . str_replace(getConfig('PATH'), '', getConfig('CACHE_PATH')) . "debug.log</strong> in your report (you can now attach files):<pre>";
$debug .= debug_get_printable_backtrace();
$debug .= "</pre>\nRequest-URI: " . getRequestUri()."<br />\n";
$debug .= "Thank you for finding bugs.";
+ // Send an email? (e.g. not wanted for evaluation errors)
+ if (($sendEmail === true) && (!isInstallationPhase())) {
+ // Prepare content
+ $content = array(
+ 'message' => trim($message),
+ 'backtrace' => trim(debug_get_mailable_backtrace())
+ );
+
+ // Send email to webmaster
+ sendAdminNotification(getMessage('DEBUG_REPORT_BUG_SUBJECT'), 'admin_report_bug', $content);
+ } // END - if
+
// And abort here
- // @TODO This cannot be rewritten to app_die(), try to find a solution for this.
- die($debug);
+ app_die(__FUNCTION__, __LINE__, $debug);
}
-// Generates a ***weak*** seed (taken from de.php.net/mt_srand)
+// Generates a ***weak*** seed
function generateSeed () {
- list($usec, $sec) = explode(' ', microtime());
- $microTime = (((float)$sec + (float)$usec)) * 100000;
- return $microTime;
+ return microtime(true) * 100000;
}
// Converts a message code to a human-readable message
$message = '';
switch ($code) {
case '': break;
- case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
- case getCode('LOGOUT_FAILED') : $message = "<span class=\"guest_failed\">{--LOGOUT_FAILED--}</span>"; break;
- case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
- case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
- case getCode('ACCOUNT_LOCKED') : $message = getMessage('MEMBER_ACCOUNT_LOCKED_UNC'); break;
- case getCode('USER_404') : $message = getMessage('USER_404'); break;
- case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
- case getCode('ALREADY_CONFIRMED'): $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
- case getCode('WRONG_PASS') : $message = getMessage('LOGIN_WRONG_PASS'); break;
- case getCode('WRONG_ID') : $message = getMessage('LOGIN_WRONG_ID'); break;
- case getCode('ID_LOCKED') : $message = getMessage('LOGIN_ID_LOCKED'); break;
- case getCode('ID_UNCONFIRMED') : $message = getMessage('LOGIN_ID_UNCONFIRMED'); break;
- case getCode('ID_GUEST') : $message = getMessage('LOGIN_ID_GUEST'); break;
- case getCode('NO_COOKIES') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
- case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
- case getCode('MODULE_MEM_ONLY') : $message = sprintf(getMessage('MODULE_MEM_ONLY'), getRequestElement('mod')); break;
- case getCode('OVERLENGTH') : $message = getMessage('MEMBER_TEXT_OVERLENGTH'); break;
- case getCode('URL_FOUND') : $message = getMessage('MEMBER_TEXT_CONTAINS_URL'); break;
- case getCode('SUBJ_URL') : $message = getMessage('MEMBER_SUBJ_CONTAINS_URL'); break;
- case getCode('BLIST_URL') : $message = "{--MEMBER_URL_BLACK_LISTED--}<br />\n{--MEMBER_BLIST_TIME--}: ".generateDateTime(getRequestElement('blist'), 0); break;
- case getCode('NO_RECS_LEFT') : $message = getMessage('MEMBER_SELECTED_MORE_RECS'); break;
- case getCode('INVALID_TAGS') : $message = getMessage('MEMBER_HTML_INVALID_TAGS'); break;
- case getCode('MORE_POINTS') : $message = getMessage('MEMBER_MORE_POINTS_NEEDED'); break;
- case getCode('MORE_RECEIVERS1') : $message = getMessage('MEMBER_ENTER_MORE_RECEIVERS'); break;
- case getCode('MORE_RECEIVERS2') : $message = getMessage('MEMBER_NO_MORE_RECEIVERS_FOUND'); break;
- case getCode('MORE_RECEIVERS3') : $message = sprintf(getMessage('MEMBER_ENTER_MORE_MIN_RECEIVERS'), getConfig('order_min')); break;
- case getCode('INVALID_URL') : $message = getMessage('MEMBER_ENTER_INVALID_URL'); break;
+ case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
+ case getCode('LOGOUT_FAILED') : $message = '<span class="guest_failed">{--LOGOUT_FAILED--}</span>'; break;
+ case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
+ case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
+ case getCode('USER_404') : $message = getMessage('USER_404'); break;
+ case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
+ case getCode('ALREADY_CONFIRMED') : $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
+ case getCode('WRONG_PASS') : $message = getMessage('LOGIN_WRONG_PASS'); break;
+ case getCode('WRONG_ID') : $message = getMessage('LOGIN_WRONG_ID'); break;
+ case getCode('ACCOUNT_LOCKED') : $message = getMessage('LOGIN_STATUS_LOCKED'); break;
+ case getCode('ACCOUNT_UNCONFIRMED'): $message = getMessage('LOGIN_STATUS_UNCONFIRMED'); break;
+ case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_COOKIES_DISABLED'); break;
+ case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
+ case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
+ case getCode('MODULE_MEM_ONLY') : $message = getMaskedMessage('MODULE_MEM_ONLY', getRequestElement('mod')); break;
+ case getCode('OVERLENGTH') : $message = getMessage('MEMBER_TEXT_OVERLENGTH'); break;
+ case getCode('URL_FOUND') : $message = getMessage('MEMBER_TEXT_CONTAINS_URL'); break;
+ case getCode('SUBJ_URL') : $message = getMessage('MEMBER_SUBJ_CONTAINS_URL'); break;
+ case getCode('BLIST_URL') : $message = "{--MEMBER_URL_BLACK_LISTED--}<br />\n{--MEMBER_BLIST_TIME--}: ".generateDateTime(getRequestElement('blist'), 0); break;
+ case getCode('NO_RECS_LEFT') : $message = getMessage('MEMBER_SELECTED_MORE_RECS'); break;
+ case getCode('INVALID_TAGS') : $message = getMessage('MEMBER_HTML_INVALID_TAGS'); break;
+ case getCode('MORE_POINTS') : $message = getMessage('MEMBER_MORE_POINTS_NEEDED'); break;
+ case getCode('MORE_RECEIVERS1') : $message = getMessage('MEMBER_ENTER_MORE_RECEIVERS'); break;
+ case getCode('MORE_RECEIVERS2') : $message = getMessage('MEMBER_NO_MORE_RECEIVERS_FOUND'); break;
+ case getCode('MORE_RECEIVERS3') : $message = getMessage('MEMBER_ENTER_MORE_MIN_RECEIVERS'); break;
+ case getCode('INVALID_URL') : $message = getMessage('MEMBER_ENTER_INVALID_URL'); break;
+ case getCode('UNKNOWN_ERROR') : $message = getMessage('LOGIN_UNKNOWN_ERROR'); break;
+ case getCode('UNKNOWN_STATUS') : $message = getMessage('LOGIN_UNKNOWN_STATUS'); break;
case getCode('ERROR_MAILID'):
if (isExtensionActive('mailid', true)) {
$message = getMessage('ERROR_CONFIRMING_MAIL');
} else {
- $message = sprintf(getMessage('EXTENSION_PROBLEM_NOT_INSTALLED'), 'mailid');
+ $message = getMaskedMessage('EXTENSION_PROBLEM_NOT_INSTALLED', 'mailid');
}
break;
break;
case getCode('URL_TLOCK'):
+ // @TODO Move this SQL code into a function, let's say 'getTimestampFromPoolId($id) ?
$result = SQL_QUERY_ESC("SELECT `timestamp` FROM `{?_MYSQL_PREFIX?}_pool` WHERE `id`=%s LIMIT 1",
array(bigintval(getRequestElement('id'))), __FILE__, __LINE__);
// Load timestamp from last order
list($timestamp) = SQL_FETCHROW($result);
- $timestamp = generateDateTime($timestamp, 1);
// Free memory
SQL_FREERESULT($result);
+ // Translate it for templates
+ $timestamp = generateDateTime($timestamp, 1);
+
// Calculate hours...
$STD = round(getConfig('url_tlock') / 60 / 60);
default:
// Missing/invalid code
- $message = sprintf(getMessage('UNKNOWN_MAILID_CODE'), $code);
+ $message = getMaskedMessage('UNKNOWN_MAILID_CODE', $code);
// Log it
logDebugMessage(__FUNCTION__, __LINE__, $message);
} // END - if
// Write to temp file
- fputs($fp_tmp, $line);
+ fwrite($fp_tmp, $line);
} // END - while
// Close temp file
}
// Send notification to admin
function sendAdminNotification ($subject, $templateName, $content=array(), $userid = '0') {
- if (isExtensionInstalledAndNewer('admins', '0.4.1')) {
+ if ((isExtensionInstalledAndNewer('admins', '0.4.1')) && (function_exists('sendAdminsEmails'))) {
// Send new way
sendAdminsEmails($subject, $templateName, $content, $userid);
} else {
if ((empty($mode)) && (isset($data['mode']))) $mode = $data['mode'];
// Generate receiver list
- $RECEIVER = generateReceiverList($data['cat'], $data['receiver'], $mode);
+ $receiver = generateReceiverList($data['cat'], $data['receiver'], $mode);
// Receivers added?
- if (!empty($RECEIVER)) {
+ if (!empty($receiver)) {
// Add bonus mail to queue
addBonusMailToQueue(
$data['subject'],
$data['text'],
- $RECEIVER,
+ $receiver,
$data['points'],
$data['seconds'],
$data['url'],
} elseif ((isSessionVariableSet('refid')) && (getSession('refid') != 0)) {
// Set session refid als global
$GLOBALS['refid'] = bigintval(getSession('refid'));
- } elseif ((isExtensionInstalledAndNewer('user', '0.3.4')) && (getConfig('select_user_zero_refid')) == 'Y') {
+ } elseif ((isExtensionInstalledAndNewer('user', '0.3.4')) && (getConfig('select_user_zero_refid') == 'Y')) {
// Select a random user which has confirmed enougth mails
$GLOBALS['refid'] = determineRandomReferalId();
} elseif ((isExtensionInstalled('sql_patches')) && (getConfig('def_refid') > 0)) {
$found = false;
// Do we have nickname or userid set?
- if (isNicknameUsed($GLOBALS['refid'])) {
+ if ((isExtensionActive('nickname')) && (isNicknameUsed($GLOBALS['refid']))) {
// Nickname in URL, so load the id
$found = fetchUserData($GLOBALS['refid'], 'nickname');
} elseif ($GLOBALS['refid'] > 0) {
}
// Is the record valid?
- if (($found === false) || (!isUserDataValid())) {
+ if ((($found === false) || (!isUserDataValid())) && (isConfigEntrySet('def_refid'))) {
// No, then reset referal id
$GLOBALS['refid'] = getConfig('def_refid');
} // END - if
// Call the filter chain 'shutdown'
runFilterChain('shutdown', null);
- if (SQL_IS_LINK_UP()) {
+ // Check if not in installation phase and the link is up
+ if ((!isInstallationPhase()) && (SQL_IS_LINK_UP())) {
// Close link
SQL_CLOSE(__FILE__, __LINE__);
} elseif (!isInstallationPhase()) {
} // END - if
// Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXT_INACTIVE', $ext_name);
// Is an admin logged in?
if (isAdmin()) {
// Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ $message = getMaskedMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE', $ext_name);
} // END - if
// Return prepared message
} // END - if
// Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXT_NOT_INSTALLED', $ext_name);
// Is an admin logged in?
if (isAdmin()) {
// Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+ $message = getMaskedMessage('ADMIN_EXTENSION_PROBLEM_EXT_NOT_INSTALLED', $ext_name);
} // END - if
// Return prepared message
// Reads a directory recursively by default and searches for files not matching
// an exclusion pattern. You can now keep the exclusion pattern empty for reading
// a whole directory.
-function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true) {
+function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true, $suffix = '') {
// Add default entries we should exclude
$excludeArray[] = '.';
$excludeArray[] = '..';
// Remove double slashes
$FQFN = str_replace('//', '/', $FQFN);
- // Check if the base filename matches an exclusion pattern and if the pattern is not empty
+ // Check if the base filenname matches an exclusion pattern and if the pattern is not empty
if ((!empty($excludePattern)) && (preg_match($excludePattern, $baseFile, $match))) {
// These Lines are only for debugging!!
//* DEBUG: */ outputHtml('baseDir:' . $baseDir . '<br />');
// Skip this file
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "Invalid prefix in file " . $baseFile . ", prefix=" . $prefix);
continue;
+ } elseif ((!empty($suffix)) && (substr($baseFile, -(strlen($suffix . $extension)), (strlen($suffix . $extension))) != $suffix . $extension)) {
+ // Skip wrong suffix as well
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "Invalid suffix in file " . $baseFile . ", suffix=" . $suffix);
+ continue;
} elseif (!isFileReadable($FQFN)) {
// Not readable so skip it
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "File " . $FQFN . " is not readable!");
closedir($dirPointer);
// Sort array
- asort($files);
+ sort($files);
// Return array with include files
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, '- Left!');
$TITLE = '';
// Title decoration enabled?
- if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_left') != '')) $TITLE .= trim(getConfig('title_left'))." ";
+ if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_left') != '')) $TITLE .= trim(getConfig('title_left')) . ' ';
// Do we have some extra title?
if (isExtraTitleSet()) {
$mode = '';
if (getModule() == 'login') $mode = 'member';
elseif (getModule() == 'index') $mode = 'guest';
- if ((!empty($mode)) && (getConfig('enable_what_title') == 'Y')) $TITLE .= " ".trim(getConfig('title_middle'))." ".getModuleDescription($mode, getWhat());
+ if ((!empty($mode)) && (getConfig('enable_what_title') == 'Y')) $TITLE .= ' ' . trim(getConfig('title_middle')) . ' ' . getTitleFromMenu($mode, getWhat());
// Add title decorations? (right)
- if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_right') != '')) $TITLE .= " ".trim(getConfig('title_right'));
+ if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_right') != '')) $TITLE .= ' ' . trim(getConfig('title_right'));
// Remember title in constant for the template
$pageTitle = $TITLE;
} elseif ((isInstalled()) && (isAdminRegistered())) {
// Installed, admin registered but no ext-sql_patches
- $pageTitle = '[-- ' . getConfig('MAIN_TITLE').' - '.getModuleTitle(getModule()) . ' --]';
+ $pageTitle = '[-- ' . getConfig('MAIN_TITLE') . ' - ' . getModuleTitle(getModule()) . ' --]';
} elseif ((isInstalled()) && (!isAdminRegistered())) {
// Installed but no admin registered
- $pageTitle = sprintf(getMessage('SETUP_OF_MXCHANGE'), getConfig('MAIN_TITLE'));
+ $pageTitle = getMessage('SETUP_OF_MXCHANGE');
} elseif ((!isInstalled()) || (!isAdminRegistered())) {
// Installation mode
$pageTitle = getMessage('INSTALLATION_OF_MXCHANGE');
}
// Return title
- return $pageTitle;
+ return decodeEntities($pageTitle);
}
// Checks wethere there is a cache file there. This function is cached.
// Flushes non-flushed template cache to disk
function flushTemplateCache ($template, $eval) {
// Is this cache flushed?
- if ((!isTemplateCached($template)) && ($eval != '404')) {
+ if ((isDebuggingTemplateCache() === false) && (isTemplateCached($template) === false) && ($eval != '404')) {
// Generate FQFN
$FQFN = sprintf("%s_compiled/templates/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
// Reads a template cache
function readTemplateCache ($template) {
// Check it again
- if (isTemplateCached($template)) {
+ if ((isDebuggingTemplateCache() === false) && (isTemplateCached($template))) {
// Generate FQFN
$FQFN = sprintf("%s_compiled/templates/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
$str = addslashes($str);
} else {
// Escape only double-quotes but prevent double-quoting
- $str = stripslashes(str_replace('"', "\\\"", $str));
+ $str = str_replace("\\\\", "\\", str_replace('"', "\\\"", $str));
}
// Return the escaped string
return $str;
}
+// Escapes the JavaScript code, prevents \r and \n becoming char 10/13
+function escapeJavaScriptQuotes ($str) {
+ // Replace all double-quotes and secure back-ticks
+ $str = str_replace('"', '\"', str_replace("\\", '{BACK}', $str));
+
+ // Return it
+ return $str;
+}
+
+// Send out mails depending on the 'mod/modes' combination
+// @TODO Lame description for this function
+function sendModeMails ($mod, $modes) {
+ // Load hash
+ if (fetchUserData(getMemberId())) {
+ // Extract salt from cookie
+ $salt = substr(getSession('u_hash'), 0, -40);
+
+ // Now let's compare passwords
+ $hash = generatePassString(getUserData('password'));
+
+ // Does the hash match or should we change it?
+ if (($hash == getSession('u_hash')) || (postRequestElement('pass1') == postRequestElement('pass2'))) {
+ // Load the data
+ $content = getUserDataArray();
+
+ // Translate gender
+ $content['gender'] = translateGender($content['gender']);
+
+ // Clear/init the content variable
+ $content['message'] = '';
+
+ // Which mail?
+ // @TODO Move this in a filter
+ switch ($mod) {
+ case 'mydata':
+ foreach ($modes as $mode) {
+ switch ($mode) {
+ case 'normal': break; // Do not add any special lines
+ case 'email': // Email was changed!
+ $content['message'] = getMessage('MEMBER_CHANGED_EMAIL').": ".postRequestElement('old_email')."\n";
+ break;
+
+ case 'pass': // Password was changed
+ $content['message'] = getMessage('MEMBER_CHANGED_PASS')."\n";
+ break;
+
+ default:
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown mode %s detected.", $mode));
+ $content['message'] = getMessage('MEMBER_UNKNOWN_MODE') . ': ' . $mode . "\n\n";
+ break;
+ } // END - switch
+ } // END - foreach
+
+ if (isExtensionActive('country')) {
+ // Replace code with description
+ $content['country'] = generateCountryInfo(postRequestElement('country_code'));
+ } // END - if
+
+ // Merge content with data from POST
+ $content = merge_array($content, postRequestArray());
+
+ // Load template
+ $message = loadEmailTemplate('member_mydata_notify', $content, getMemberId());
+
+ if (getConfig('admin_notify') == 'Y') {
+ // The admin needs to be notified about a profile change
+ $message_admin = 'admin_mydata_notify';
+ $sub_adm = getMessage('ADMIN_CHANGED_DATA');
+ } else {
+ // No mail to admin
+ $message_admin = '';
+ $sub_adm = '';
+ }
+
+ // Set subject lines
+ $sub_mem = getMessage('MEMBER_CHANGED_DATA');
+
+ // Output success message
+ $content = "<span class=\"member_done\">{--MYDATA_MAIL_SENT--}</span>";
+ break;
+
+ default: // Unsupported module!
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unsupported module %s detected.", $mod));
+ $content = "<span class=\"member_failed\">{--UNKNOWN_MODULE--}</span>";
+ break;
+ } // END - switch
+ } else {
+ // Passwords mismatch
+ $content = "<span class=\"member_failed\">{--MEMBER_PASSWORD_ERROR--}</span>";
+ }
+ } else {
+ // Could not load profile
+ $content = "<span class=\"member_failed\">{--MEMBER_CANNOT_LOAD_PROFILE--}</span>";
+ }
+
+ // Send email to user if required
+ if ((!empty($sub_mem)) && (!empty($message))) {
+ // Send member mail
+ sendEmail($content['email'], $sub_mem, $message);
+ } // END - if
+
+ // Send only if no other error has occured
+ if (empty($content)) {
+ if ((!empty($sub_adm)) && (!empty($message_admin))) {
+ // Send admin mail
+ sendAdminNotification($sub_adm, $message_admin, $content, getMemberId());
+ } elseif (getConfig('admin_notify') == 'Y') {
+ // Cannot send mails to admin!
+ $content = getMessage('CANNOT_SEND_ADMIN_MAILS');
+ } else {
+ // No mail to admin
+ $content = "<span class=\"member_done\">{--MYDATA_MAIL_SENT--}</span>";
+ }
+ } // END - if
+
+ // Load template
+ loadTemplate('admin_settings_saved', false, $content);
+}
+
+// Generates a 'selection box' from given array
+function generateSelectionBoxFromArray ($options, $name, $optionValue, $optionContent) {
+ // Start the output
+ $OUT = '<select name="' . $name . '" size="1" class="admin_select">
+<option value="X" disabled="disabled">{--PLEASE_SELECT--}</option>';
+
+ // Walk through all options
+ foreach ($options as $option) {
+ // Add the <option> entry
+ $OUT .= '<option value="' . $option[$optionValue] . '">' . $option[$optionContent] . '</option>';
+ } // END - foreach
+
+ // Finish selection box
+ $OUT .= '</select>';
+
+ // Prepare output
+ $content = array(
+ 'selection_box' => $OUT,
+ 'module' => getModule(),
+ 'what' => getWhat()
+ );
+
+ // Load template and return it
+ return loadTemplate('select_' . $name . '_box', true, $content);
+}
+
+// Get a module from filename and access level
+function getModuleFromFileName ($file, $accessLevel) {
+ // Default is 'invalid';
+ $modCheck = 'invalid';
+
+ // @TODO This is still very static, rewrite it somehow
+ switch ($accessLevel) {
+ case 'admin':
+ $modCheck = 'admin';
+ break;
+
+ case 'sponsor':
+ case 'guest':
+ case 'member':
+ $modCheck = getModule();
+ break;
+
+ default: // Unsupported file name / access level
+ debug_report_bug('Unsupported file name=' . basename($file) . '/access level=' . $accessLevel);
+ break;
+ }
+
+ // Return result
+ return $modCheck;
+}
+
+// Encodes an URL for adding session id, etc.
+function encodeUrl ($url, $outputMode = '0') {
+ // Do we have already have a PHPSESSID inside? Then it is already converted...
+ if (strpos($url, session_name()) !== false) return $url;
+
+ // Do we have a valid session?
+ if (((!isset($GLOBALS['valid_session'])) || ($GLOBALS['valid_session'] === false) || (!isset($_COOKIE[session_name()]))) && (isSpider() === false)) {
+ // Invalid session
+ // Determine right seperator
+ $seperator = '&';
+ if (strpos($url, '?') === false) {
+ // No question mark
+ $seperator = '?';
+ } elseif ((getOutputMode() != '0') || ($outputMode != '0')) {
+ // Non-HTML mode
+ $seperator = '&';
+ }
+
+ // Add it to URL
+ if (session_id() != '') {
+ $url .= $seperator . session_name() . '=' . session_id();
+ } // END - if
+ } // END - if
+
+ // Add {?URL?} ?
+ if ((substr($url, 0, strlen(getConfig('URL'))) != getConfig('URL')) && (substr($url, 0, 7) != '{?URL?}') && (substr($url, 0, 7) != 'http://') && (substr($url, 0, 8) != 'https://')) {
+ // Add it
+ $url = '{?URL?}/' . $url;
+ } // END - if
+
+ // Return the URL
+ return $url;
+}
+
+// Simple check for spider
+function isSpider () {
+ // Get the UA
+ $userAgent = strtolower(detectUserAgent(true));
+
+ // It should not be empty, if so it is better a spider/bot
+ if (empty($userAgent)) return true;
+
+ // Is it a spider?
+ return ((strpos($userAgent, 'spider') !== false) || (strpos($userAgent, 'slurp') !== false) || (strpos($userAgent, 'bot') !== false));
+}
+
//////////////////////////////////////////////////
// AUTOMATICALLY RE-GENERATED MISSING FUNCTIONS //
//////////////////////////////////////////////////
if (!function_exists('http_build_query')) {
// Taken from documentation on www.php.net, credits to Marco K. (Germany)
- function http_build_query($data, $prefix='', $sep='', $key='') {
+ function http_build_query($data, $prefix = '', $sep = '', $key = '') {
$ret = array();
foreach ((array)$data as $k => $v) {
if (is_int($k) && $prefix != null) {
return implode($sep, $ret);
}
-}// // END - if
+} // END - if
// [EOF]
?>