* svn:keywords Date Revision" (autoprobset!) at least!!!!!! *
* -------------------------------------------------------------------- *
* Copyright (c) 2003 - 2009 by Roland Haeder *
+ * Copyright (c) 2009, 2010 by Mailer Developer Team *
* For more information visit: http://www.mxchange.org *
* *
* This program is free software; you can redistribute it and/or modify *
app_die(__FUNCTION__, __LINE__, '<strong>{--FATAL_ERROR--}:</strong> {--LANG_NO_RENDER_DIRECT--}');
break;
} // END - switch
- } elseif ((getPhpCaching() == 'on') && (isset($GLOBALS['footer_sent'])) && ($GLOBALS['footer_sent'] == 1)) {
- // Headers already sent?
- if (headers_sent()) {
- // Log this error
- logDebugMessage(__FUNCTION__, __LINE__, 'Headers already sent! We need debug backtrace here.');
-
- // Trigger an user error
- debug_report_bug('Headers are already sent!');
- } // END - if
-
+ } elseif ((getPhpCaching() == 'on') && ((!isset($GLOBALS['header'])) || (count($GLOBALS['header']) == 0))) {
// Output cached HTML code
$GLOBALS['output'] = ob_get_contents();
$GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
} // END - if
- // Compile and run finished rendered HTML code
- compileFinalOutput();
-
// Send all HTTP headers
sendHttpHeaders();
+ // Compile and run finished rendered HTML code
+ compileFinalOutput();
+
// Output code here, DO NOT REMOVE! ;-)
outputRawCode($GLOBALS['output']);
} elseif ((getConfig('OUTPUT_MODE') == 'render') && (!empty($GLOBALS['output']))) {
$GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
} // END - if
- // Compile and run finished rendered HTML code
- compileFinalOutput();
-
// Send all HTTP headers
sendHttpHeaders();
+ // Compile and run finished rendered HTML code
+ compileFinalOutput();
+
// Output code here, DO NOT REMOVE! ;-)
outputRawCode($GLOBALS['output']);
+ } else {
+ // And flush all headers
+ flushHeaders();
}
}
sendHeader('HTTP/1.1 200');
// General headers for no caching
- sendHeader('Expired: ' . $now); // RFC2616 - Section 14.21
+ sendHeader('Expires: ' . $now); // RFC2616 - Section 14.21
sendHeader('Last-Modified: ' . $now);
sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
sendHeader('Pragma: no-cache'); // HTTP/1.0
// Init counter
$cnt = '0';
+ // Add page header and footer
+ addPageHeaderFooter();
+
// Compile all out
while (((strpos($GLOBALS['output'], '{--') > 0) || (strpos($GLOBALS['output'], '{!') > 0) || (strpos($GLOBALS['output'], '{?') > 0)) && ($cnt < 3)) {
// Init common variables
// Was that eval okay?
if (empty($newContent)) {
// Something went wrong!
- debug_report_bug('Evaluation error:<pre>' . linenumberCode($eval) . '</pre>');
+ debug_report_bug('Evaluation error:<pre>' . linenumberCode($eval) . '</pre>', false);
} // END - if
$GLOBALS['output'] = $newContent;
$cnt++;
} // END - while
+ // Compress it?
+ if (!empty($_SERVER['HTTP_ACCEPT_ENCODING']) && (strpos('gzip', $_SERVER['HTTP_ACCEPT_ENCODING']) !== null)) {
+ // Compress it for HTTP gzip
+ $GLOBALS['output'] = gzencode($GLOBALS['output'], 9, true);
+
+ // Add header
+ sendHeader('Content-Encoding: gzip');
+ } elseif (!empty($_SERVER['HTTP_ACCEPT_ENCODING']) && (strpos('deflate', $_SERVER['HTTP_ACCEPT_ENCODING']) !== null)) {
+ // Compress it for HTTP deflate
+ $GLOBALS['output'] = gzcompress($GLOBALS['output'], 9);
+
+ // Add header
+ sendHeader('Content-Encoding: deflate');
+ }
+
// Add final length
sendHeader('Content-Length: ' . strlen($GLOBALS['output']));
+
+ // Flush all headers
+ flushHeaders();
}
// Output the raw HTML code
$GLOBALS['fatal_messages'][] = $message;
// Log fatal messages away
- debug_report_bug($message);
logDebugMessage($F, $L, 'Fatal error message: ' . $message);
}
// Do we have to compile the code?
$ret = '';
- if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{!') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false)) {
+ if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{!') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false) || (strpos($GLOBALS['tpl_content'], '{%') !== false)) {
// Normal HTML output?
if (getOutputMode() == '0') {
// Add surrounding HTML comments to help finding bugs faster
} else {
// Add surrounding HTML comments to help finding bugs faster
$ret = '<!-- Template ' . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . '<!-- Template ' . $template . " - End -->\n";
- $eval = '$ret = "' . escapeQuotes($ret) . '";';
+ $eval = '$ret = "' . compileRawCode(escapeQuotes($ret)) . '";';
} // END - if
// Cache the eval() command here
}
// Loads an email template and compiles it
-function loadEmailTemplate ($template, $content = array(), $UID = '0') {
+function loadEmailTemplate ($template, $content = array(), $userid = '0') {
global $DATA;
// Make sure all template names are lowercase!
// Default 'nickname' if extension is not installed
$nick = '---';
- // Prepare IP number and User Agent
- $REMOTE_ADDR = detectRemoteAddr();
- $HTTP_USER_AGENT = detectUserAgent();
-
- // Default admin
- $ADMIN = getConfig('MAIN_TITLE');
-
- // Is the admin logged in?
- if (isAdmin()) {
- // Get admin id
- $adminId = getCurrentAdminId();
-
- // Load Admin data
- $ADMIN = getAdminEmail($adminId);
- } // END - if
-
// Neutral email address is default
$email = getConfig('WEBMASTER');
- // Expiration in a nice output format
- // NOTE: Use $content[expiration] in your templates instead of $EXPIRATION
- if (getConfig('auto_purge') == '0') {
- // Will never expire!
- $EXPIRATION = getMessage('MAIL_WILL_NEVER_EXPIRE');
- } else {
- // Create nice date string
- $EXPIRATION = createFancyTime(getConfig('auto_purge'));
- }
-
// Is content an array?
if (is_array($content)) {
- // Add expiration to array, $EXPIRATION is now deprecated!
- $content['expiration'] = $EXPIRATION;
+ // Add expiration to array
+ if ((isConfigEntrySet('auto_purge')) && (getConfig('auto_purge') == '0')) {
+ // Will never expire!
+ $content['expiration'] = getMessage('MAIL_WILL_NEVER_EXPIRE');
+ } elseif (isConfigEntrySet('auto_purge')) {
+ // Create nice date string
+ $content['expiration'] = createFancyTime(getConfig('auto_purge'));
+ } else {
+ // Missing entry
+ $content['expiration'] = getMessage('MAIL_NO_CONFIG_AUTO_PURGE');
+ }
} // END - if
// Load user's data
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):UID={$UID},template={$template},content[]=".gettype($content).'<br />');
- if (($UID > 0) && (is_array($content))) {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "UID={$userid},template={$template},content[]=".gettype($content).'<br />');
+ if (($userid > 0) && (is_array($content))) {
// If nickname extension is installed, fetch nickname as well
- if ((isExtensionActive('nickname')) && (isNicknameUsed($UID))) {
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NICKNAME!<br />");
+ if ((isExtensionActive('nickname')) && (isNicknameUsed($userid))) {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "NICKNAME!<br />");
// Load by nickname
- fetchUserData($UID, 'nickname');
+ fetchUserData($userid, 'nickname');
} else {
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NO-NICK!<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "NO-NICK!<br />");
/// Load by userid
- fetchUserData($UID);
+ fetchUserData($userid);
}
// Merge data if valid
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - PRE<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "content()=".count($content)." - PRE<br />");
if (isUserDataValid()) {
$content = merge_array($content, getUserDataArray());
} // END - if
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - AFTER<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "content()=".count($content)." - AFTER<br />");
} // END - if
// Translate M to male or F to female if present
// Overwrite email from data if present
if (isset($content['email'])) $email = $content['email'];
- // Store email for some functions in global data array
- // @TODO Do only use $contentn, not $DATA or raw variables
+ // Store email for some functions in global $DATA array
+ // @TODO Do only use $content, not $DATA or raw variables
$DATA['email'] = $email;
// Base directory
// Is there some content?
if (empty($newContent)) {
// Compiling failed
- $newContent = "Compiler error for template {$template}!\nUncompiled content:\n" . $GLOBALS['tpl_content'];
+ $newContent = "Compiler error for template " . $template . " !\nUncompiled content:\n" . $GLOBALS['tpl_content'];
// Add last error if the required function exists
if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx.";
// Send mail out to an email address
function sendEmail ($toEmail, $subject, $message, $isHtml = 'N', $mailHeader = '') {
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$toEmail},SUBJECT={$subject}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail},SUBJECT={$subject}<br />");
// Compile subject line (for POINTS constant etc.)
eval("\$subject = decodeEntities(\"".compileRawCode(escapeQuotes($subject))."\");");
// Is the webmaster!
$toEmail = getConfig('WEBMASTER');
}
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$toEmail}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail}<br />");
// Check for PHPMailer or debug-mode
if (!checkPhpMailerUsage()) {
eval("\$toEmail = \"".compileRawCode(escapeQuotes($toEmail))."\";");
// Compile "MSG"
- eval("\$message = \"".compileRawCode(escapeQuotes($message))."\";");
+ eval("\$message = \"".str_replace('$', '$', compileRawCode(escapeQuotes($message)))."\";");
// Fix HTML parameter (default is no!)
if (empty($isHtml)) $isHtml = 'N';
if (isDebugModeEnabled()) {
// In debug mode we want to display the mail instead of sending it away so we can debug this part
outputHtml('<pre>
-Headers : ' . str_replace('<', '<', str_replace('>', '>', secureString(trim($mailHeader)))) . '
-To : ' . $toEmail . '
-Subject : ' . $subject . '
-Message : ' . $message . '
+Headers : ' . htmlentities(utf8_decode(trim($mailHeader))) . '
+To : ' . htmlentities(utf8_decode($toEmail)) . '
+Subject : ' . htmlentities(utf8_decode($subject)) . '
+Message : ' . htmlentities(utf8_decode($message)) . '
</pre>');
} elseif (($isHtml == 'Y') && (isExtensionActive('html_mail'))) {
// Send mail as HTML away
// Translates the "pool type" into human-readable
function translatePoolType ($type) {
// Default?type is unknown
- $translated = sprintf(getMessage('POOL_TYPE_UNKNOWN'), $type);
+ $translated = getMaskedMessage('POOL_TYPE_UNKNOWN', $type);
// Generate constant
$constName = sprintf("POOL_TYPE_%s", $type);
case 'F': $ret = getMessage('GENDER_F'); break;
case 'C': $ret = getMessage('GENDER_C'); break;
default:
- // Log unknown gender
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
+ // Please report bugs on unknown genders
+ debug_report_bug(sprintf("Unknown gender %s detected.", $gender));
break;
- }
+ } // END - switch
// Return translated gender
return $ret;
break;
default:
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
- $ret = sprintf(getMessage('UNKNOWN_STATUS'), $status);
+ // Please report all unknown status
+ debug_report_bug(sprintf("Unknown status %s detected.", $status));
break;
} // END - switch
// Don't de-refer our own links!
if (substr($URL, 0, strlen(getConfig('URL'))) != getConfig('URL')) {
// De-refer this link
- $URL = '{?URL?}/modules.php?module=loader&url=' . encodeString(compileUriCode($URL));
+ $URL = '{%url=modules.php?module=loader&url=' . encodeString(compileUriCode($URL)) . '%}';
} // END - if
// Return link
// Generates an URL for the frametester
function generateFrametesterUrl ($URL) {
// Prepare frametester URL
- $frametesterUrl = sprintf("{?URL?}/modules.php?module=frametester&url=%s",
+ $frametesterUrl = sprintf("{%%url=modules.php?module=frametester&url=%s%%}",
encodeString(compileUriCode($URL))
);
// Generate XHTML code for the CAPTCHA
function generateCaptchaCode ($code, $type, $DATA, $userid) {
- return '<img border="0" alt="Code ' . $code . '" src="{?URL?}/mailid_top.php?userid=' . $userid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '" />';
+ return '<img border="0" alt="Code ' . $code . '" src="{%url=mailid_top.php?userid=' . $userid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '%}" />';
}
// Generates a timestamp (some wrapper for mktime())
}
// Redirects to an URL and if neccessarry extends it with own base URL
-function redirectToUrl ($URL) {
+function redirectToUrl ($URL, $allowSpider = true) {
// Compile out codes
- eval('$URL = "' . compileRawCode($URL) . '";');
-
- // Check if http(s):// is there
- if ((substr($URL, 0, 7) != 'http://') && (substr($URL, 0, 8) != 'https://')) {
- // Make all URLs full-qualified
- $URL = getConfig('URL') . '/' . $URL;
- } // END - if
-
- // Three different debug ways...
- //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
- //* DEBUG: */ die($URL);
+ eval('$URL = "' . compileRawCode(encodeUrl($URL)) . '";');
// Default 'rel' value is external, nofollow is evil from Google and hurts the Internet
$rel = ' rel="external"';
$rel = '';
} // END - if
- // Get output buffer
- $GLOBALS['output'] = ob_get_contents();
-
- // Clear it only if there is content
- if (!empty($GLOBALS['output'])) {
- clearOutputBuffer();
- } // END - if
+ // Three different ways to debug...
+ //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
+ //* DEBUG: */ die($URL);
// Simple probe for bots/spiders from search engines
- if ((strpos(detectUserAgent(), 'spider') !== false) || (strpos(detectUserAgent(), 'bot') !== false)) {
+ if ((isSpider()) && ($allowSpider === true)) {
// Secure the URL against bad things such als HTML insertions and so on...
$URL = secureString($URL);
+ // Set content-type here to fix a missing array element
+ setContentType('text/html');
+
// Output new location link as anchor
outputHtml('<a href="' . $URL . '"' . $rel . '>' . $URL . '</a>');
} elseif (!headers_sent()) {
- //* DEBUG: */ debug_report_bug("URL={$URL}");
// Clear own output buffer
$GLOBALS['output'] = '';
if ($constants === true) {
// BEFORE 0.2.1 : Language and data constants
// WITH 0.2.1+ : Only language constants
- $code = str_replace('{--', "\".getMessage('", str_replace('--}', "').\"", $code));
+ $code = str_replace('{--', "\" . getMessage('", str_replace('--}', "') . \"", $code));
// BEFORE 0.2.1 : Not used
// WITH 0.2.1+ : Data constants
- $code = str_replace('{!', "\".constant('", str_replace("!}", "').\"", $code));
+ $code = str_replace('{!', "\" . constant('", str_replace('!}', "') . \"", $code));
} // END - if
// Compile QUOT and other non-HTML codes
$test = substr($found, 0, strlen($match));
// Does this entry exist?
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):found={$found},match={$match},set={$set}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "found={$found},match={$match},set={$set}<br />");
if ($test == $match) {
// Match found!
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):fuzzyFound!<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "fuzzyFound!<br />");
$fuzzyFound = true;
break;
} // END - if
// Take all string elements
if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_" . $matches[4][$key]]))) {
// Replace it in the code
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):key={$key},match={$match}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "key={$key},match={$match}<br />");
$newMatch = str_replace('[', "['", str_replace(']', "']", $match));
$code = str_replace($match, '".' . $newMatch . '."', $code);
$matchesFound[$key . '_' . $matches[4][$key]] = 1;
$matchesFound[$match] = 1;
} elseif (!isset($matchesFound[$match])) {
// Not yet replaced!
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):match={$match}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "match={$match}<br />");
$code = str_replace($match, '".' . $match . '."', $code);
$matchesFound[$match] = 1;
}
//
function generateRandomCode ($length, $code, $userid, $DATA = '') {
// Build server string
- $server = $_SERVER['PHP_SELF'] . getConfig('ENCRYPT_SEPERATOR') . detectUserAgent() . getConfig('ENCRYPT_SEPERATOR') . getenv('SERVER_SOFTWARE') . getConfig('ENCRYPT_SEPERATOR') . detectRemoteAddr().":'.':".filemtime(getConfig('PATH').'inc/databases.php');
+ $server = $_SERVER['PHP_SELF'] . getConfig('ENCRYPT_SEPERATOR') . detectUserAgent() . getConfig('ENCRYPT_SEPERATOR') . getenv('SERVER_SOFTWARE') . getConfig('ENCRYPT_SEPERATOR') . detectRemoteAddr();
// Build key string
$keys = getConfig('SITE_KEY') . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY');
}
// Does only allow numbers
-function bigintval ($num, $castValue = true) {
+function bigintval ($num, $castValue = true, $abortOnMismatch = true) {
// Filter all numbers out
$ret = preg_replace('/[^0123456789]/', '', $num);
if ($castValue === true) $ret = (double)$ret;
// Has the whole value changed?
- if ('' . $ret . '' != '' . $num . '') {
+ if (('' . $ret . '' != '' . $num . '') && ($abortOnMismatch === true)) {
// Log the values
debug_report_bug('Problem with number found. ret=' . $ret . ', num='. $num);
} // END - if
debug_report_bug('img_code ' . $img_code .' has invalid length. img_code()=' . strlen($img_code) . ' code_length=' . getConfig('code_length'));
} elseif ($headerSent === false) {
// Return an HTML code here
- return "<img src=\"{?URL?}/img.php?code=" . $img_code."\" alt=\"Image\" />\n";
+ return "<img src=\"{%url=img.php?code=" . $img_code."%}\" alt=\"Image\" />\n";
}
// Load image
}
// Create selection box or array of splitted timestamp
function createTimeSelections ($timestamp, $prefix = '', $display = '', $align = 'center', $return_array=false) {
+ // Do not continue if ONE_DAY is absend
+ if (!isConfigEntrySet('ONE_DAY')) {
+ // And return the timestamp itself or empty array
+ if ($return_array === true) {
+ return array();
+ } else {
+ return $timestamp;
+ }
+ } // END - if
+
// Calculate 2-seconds timestamp
$stamp = round($timestamp);
//* DEBUG: */ print("*" . $stamp.'/' . $timestamp."*<br />");
if (ereg('Y', $display) || (empty($display))) {
// Generate year selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ye\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_ye\" size=\"1\">\n";
for ($idx = '0'; $idx <= 10; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $Y) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_ye\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_ye" value="0" />';
}
if (ereg('M', $display) || (empty($display))) {
// Generate month selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mo\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_mo\" size=\"1\">\n";
for ($idx = '0'; $idx <= 11; $idx++)
{
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_mo\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_mo" value="0" />';
}
if (ereg('W', $display) || (empty($display))) {
// Generate week selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_we\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_we\" size=\"1\">\n";
for ($idx = '0'; $idx <= 4; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $W) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_we\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_we" value="0" />';
}
if (ereg('D', $display) || (empty($display))) {
// Generate day selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_da\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_da\" size=\"1\">\n";
for ($idx = '0'; $idx <= 31; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $D) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_da\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_da" value="0" />';
}
if (ereg('h', $display) || (empty($display))) {
// Generate hour selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ho\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_ho\" size=\"1\">\n";
for ($idx = '0'; $idx <= 23; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $h) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_ho\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_ho" value="0" />';
}
if (ereg('m', $display) || (empty($display))) {
// Generate minute selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mi\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_mi\" size=\"1\">\n";
for ($idx = '0'; $idx <= 59; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $m) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_mi\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_mi" value="0" />';
}
if (ereg('s', $display) || (empty($display))) {
// Generate second selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_se\" size=\"1\">\n";
+ $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix . "_se\" size=\"1\">\n";
for ($idx = '0'; $idx <= 59; $idx++) {
$OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
if ($idx == $s) $OUT .= ' selected="selected"';
}
$OUT .= " </select></td>\n";
} else {
- $OUT .= "<input type=\"hidden\" name=\"" . $prefix."_se\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_se" value="0" />';
}
$OUT .= "</tr>\n";
$OUT .= "</table>\n";
$TEST = date('Y', time()) / 4;
$M1 = date('m', time());
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($postData[$prefix."_mo"] > "02")) $SWITCH = getConfig('ONE_DAY');
+ if ((floor($TEST) == $TEST) && ($M1 == '02') && ($postData[$prefix . '_mo'] > '02')) $SWITCH = getConfig('ONE_DAY');
// First add years...
- $ret += $postData[$prefix."_ye"] * (31536000 + $SWITCH);
+ $ret += $postData[$prefix . '_ye'] * (31536000 + $SWITCH);
// Next months...
- $ret += $postData[$prefix."_mo"] * 2628000;
+ $ret += $postData[$prefix . '_mo'] * 2628000;
// Next weeks
- $ret += $postData[$prefix."_we"] * 604800;
+ $ret += $postData[$prefix . '_we'] * 604800;
// Next days...
- $ret += $postData[$prefix."_da"] * 86400;
+ $ret += $postData[$prefix . '_da'] * 86400;
// Next hours...
- $ret += $postData[$prefix."_ho"] * 3600;
+ $ret += $postData[$prefix . '_ho'] * 3600;
// Next minutes..
- $ret += $postData[$prefix."_mi"] * 60;
+ $ret += $postData[$prefix . '_mi'] * 60;
// And at last seconds...
- $ret += $postData[$prefix."_se"];
+ $ret += $postData[$prefix . '_se'];
// Return calculated value
return $ret;
}
// Generates a navigation row for listing emails
function addEmailNavigation ($PAGES, $offset, $show_form, $colspan, $return=false) {
- $SEP = ''; $TOP = '';
+ $TOP = '';
if ($show_form === false) {
$TOP = " top";
- $SEP = "<tr><td colspan=\"" . $colspan."\" class=\"seperator\"> </td></tr>";
}
$NAV = '';
for ($page = 1; $page <= $PAGES; $page++) {
// Is the page currently selected or shall we generate a link to it?
- if (($page == getRequestElement('page')) || ((!isGetRequestElementSet('page')) && ($page == 1))) {
+ if (($page == getRequestParameter('page')) || ((!isGetRequestParameterSet('page')) && ($page == 1))) {
// Is currently selected, so only highlight it
$NAV .= '<strong>-';
} else {
// Open anchor tag and add base URL
- $NAV .= '<a href="{?URL?}/modules.php?module=admin&what=' . getWhat() . '&page=' . $page . '&offset=' . $offset;
+ $NAV .= '<a href="{%url=modules.php?module=admin&what=' . getWhat() . '&page=' . $page . '&offset=' . $offset;
// Add userid when we shall show all mails from a single member
- if ((isGetRequestElementSet('userid')) && (bigintval(getRequestElement('userid')) > 0)) $NAV .= '&userid=' . bigintval(getRequestElement('userid'));
+ if ((isGetRequestParameterSet('userid')) && (bigintval(getRequestParameter('userid')) > 0)) $NAV .= '&userid=' . bigintval(getRequestParameter('userid'));
// Close open anchor tag
- $NAV .= '">';
+ $NAV .= '%}">';
}
$NAV .= $page;
- if (($page == getRequestElement('page')) || ((!isGetRequestElementSet('page')) && ($page == 1))) {
+ if (($page == getRequestParameter('page')) || ((!isGetRequestParameterSet('page')) && ($page == 1))) {
// Is currently selected, so only highlight it
$NAV .= '-</strong>';
} else {
$content['nav'] = $NAV;
$content['span'] = $colspan;
$content['top'] = $TOP;
- $content['sep'] = $SEP;
// Load navigation template
$OUT = loadTemplate('admin_email_nav_row', true, $content);
$host = extractHostnameFromUrl($script);
// Add data
- $scriptData = http_build_query($data, '', '&');
+ $body = http_build_query($data, '', '&');
// Do we have a question-mark in the script?
if (strpos($script, '?') === false) {
// No, so first char must be question mark
- $scriptData = '?' . $scriptData;
+ $body = '?' . $body;
} else {
// Ok, add &
- $scriptData = '&' . $scriptData;
+ $body = '&' . $body;
}
// Add script data
- $script .= $scriptData;
+ $script .= $body;
+
+ // Remove trailed & to make it more conform
+ if (substr($script, -1, 1) == '&') $script = substr($script, 0, -1);
// Generate GET request header
$request = 'GET /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
} else {
$request .= 'User-Agent: ' . getConfig('TITLE') . '/' . getConfig('VERSION') . getConfig('HTTP_EOL');
}
- $request .= 'Content-Type: text/plain' . getConfig('HTTP_EOL');
+ $request .= 'Accept: text/plain;q=0.8' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
$request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
- $request .= 'Connection: Close' . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
+ $request .= 'Content-Type: text/plain' . getConfig('HTTP_EOL');
+ $request .= 'Content-Length: 0' . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
// Send the raw request
$response = sendRawRequest($host, $request);
// Extract host name from script
$host = extractHostnameFromUrl($script);
- // Construct request
- $data = http_build_query($postData, '', '&');
+ // Construct request body
+ $body = http_build_query($postData, '', '&');
// Generate POST request header
$request = 'POST /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
$request .= 'Host: ' . $host . getConfig('HTTP_EOL');
$request .= 'Referer: ' . getConfig('URL') . '/admin.php' . getConfig('HTTP_EOL');
$request .= 'User-Agent: ' . getConfig('TITLE') . '/' . getConfig('FULL_VERSION') . getConfig('HTTP_EOL');
- $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
- $request .= 'Content-length: ' . strlen($data) . getConfig('HTTP_EOL');
+ $request .= 'Accept: text/plain;q=0.8' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
$request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
- $request .= 'Connection: Close' . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
- $request .= $data;
+ $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
+ $request .= 'Content-Length: ' . strlen($body) . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
+
+ // Add body
+ $request .= $body;
// Send the raw request
$response = sendRawRequest($host, $request);
//* DEBUG: */ die("SCRIPT=" . $script.'<br />');
if ($useProxy === true) {
// Connect to host through proxy connection
- $fp = @fsockopen(compileRawCode(getConfig('proxy_host')), bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
+ $fp = fsockopen(compileRawCode(getConfig('proxy_host')), bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
} else {
// Connect to host directly
- $fp = @fsockopen($host, 80, $errno, $errdesc, 30);
+ $fp = fsockopen($host, 80, $errno, $errdesc, 30);
}
// Is there a link?
if (!is_resource($fp)) {
// Failed!
+ logDebugMessage(__FUNCTION__, __LINE__, $errdesc . ' (' . $errno . ')');
return $response;
- } // END - if
+ } elseif ((!stream_set_blocking($fp, 0)) || (!stream_set_timeout($fp, 1))) {
+ // Cannot set non-blocking mode or timeout
+ logDebugMessage(__FUNCTION__, __LINE__, socket_strerror(socket_last_error()));
+ return $response;
+ }
// Do we use proxy?
if ($useProxy === true) {
// Generate CONNECT request header
- $proxyTunnel = "CONNECT " . $host . ":80 HTTP/1.1" . getConfig('HTTP_EOL');
- $proxyTunnel .= "Host: " . $host . getConfig('HTTP_EOL');
+ $proxyTunnel = 'CONNECT ' . $host . ':80 HTTP/1.1' . getConfig('HTTP_EOL');
+ $proxyTunnel .= 'Host: ' . $host . getConfig('HTTP_EOL');
// Use login data to proxy? (username at least!)
if (getConfig('proxy_username') != '') {
// Add it as well
$encodedAuth = base64_encode(compileRawCode(getConfig('proxy_username')) . getConfig('ENCRYPT_SEPERATOR') . compileRawCode(getConfig('proxy_password')));
- $proxyTunnel .= "Proxy-Authorization: Basic " . $encodedAuth . getConfig('HTTP_EOL');
+ $proxyTunnel .= 'Proxy-Authorization: Basic ' . $encodedAuth . getConfig('HTTP_EOL');
} // END - if
// Add last new-line
$proxyTunnel .= getConfig('HTTP_EOL');
- //* DEBUG: */ print("<strong>proxyTunnel=</strong><pre>" . $proxyTunnel."</pre>");
+ //* DEBUG: */ print('<strong>proxyTunnel=</strong><pre>' . $proxyTunnel.'</pre>');
// Write request
- fputs($fp, $proxyTunnel);
+ fwrite($fp, $proxyTunnel);
// Got response?
if (feof($fp)) {
} // END - if
// Write request
- fputs($fp, $request);
+ fwrite($fp, $request);
+
+ // Start counting
+ $start = microtime(true);
// Read response
while (!feof($fp)) {
- $response[] = trim(fgets($fp, 1024));
+ // Get info from stream
+ $info = stream_get_meta_data($fp);
+
+ // Is it timed out? 15 seconds is a really patient...
+ if (($info['timed_out'] == true) || (microtime(true) - $start) > 15) {
+ // Timeout
+ logDebugMessage(__FUNCTION__, __LINE__, 'Timed out to get data from host ' . $host);
+
+ // Abort here
+ break;
+ } // END - if
+
+ // Get line from stream
+ $line = fgets($fp, 128);
+
+ // Ignore empty lines because of non-blocking mode
+ if (empty($line)) {
+ // uslepp a little to avoid 100% CPU load
+ usleep(10);
+
+ // Skip this
+ continue;
+ } // END - if
+
+ // Add it to response
+ $response[] = trim($line);
} // END - while
// Close socket
fclose($fp);
+ // Time request if debug-mode is enabled
+ if (isDebugModeEnabled()) {
+ // Add debug message...
+ logDebugMessage(__FUNCTION__, __LINE__, 'Request took ' . (microtime(true) - $start) . ' seconds.');
+ } // END - if
+
// Skip first empty lines
$resp = $response;
foreach ($resp as $idx => $line) {
}
} // END - foreach
- //* DEBUG: */ print("<strong>Response:</strong><pre>".print_r($response, true)."</pre>");
+ //* DEBUG: */ print('<strong>Request:</strong><pre>'.print_r($request, true).'</pre>');
+ //* DEBUG: */ print('<strong>Response:</strong><pre>'.print_r($response, true).'</pre>');
- // Proxy agent found?
- if ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
+ // Proxy agent found or something went wrong?
+ if (!isset($response[0])) {
+ // No response, maybe timeout
+ $response = array('', '', '');
+ } elseif ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
// Proxy header detected, so remove two lines
array_shift($response);
array_shift($response);
$targetArray = array('del_user', 'edit_user', 'lock_user', 'add_points', 'sub_points');
// Begin of navigation links
- $OUT = "[ ";
+ $OUT = '[ ';
foreach ($targetArray as $tar) {
- $OUT .= "<span class=\"admin_user_link\"><a href=\"{?URL?}/modules.php?module=admin&what=" . $tar . "&userid=" . $userid . "\" title=\"{--ADMIN_LINK_";
- //* DEBUG: */ outputHtml("*" . $tar.'/' . $status."*<br />");
+ $OUT .= '<span class="admin_user_link"><a href="{%url=modules.php?module=admin&what=' . $tar . '&userid=' . $userid . '%}" title="{--ADMIN_LINK_';
+ //* DEBUG: */ outputHtml('*' . $tar.'/' . $status.'*<br />');
if (($tar == 'lock_user') && ($status == 'LOCKED')) {
// Locked accounts shall be unlocked
$OUT .= 'UNLOCK_USER';
// All other status is fine
$OUT .= strtoupper($tar);
}
- $OUT .= "_TITLE--}\">{--ADMIN_";
+ $OUT .= '_TITLE--}">{--ADMIN_';
if (($tar == 'lock_user') && ($status == 'LOCKED')) {
// Locked accounts shall be unlocked
$OUT .= 'UNLOCK_USER';
// All other status is fine
$OUT .= strtoupper($tar);
}
- $OUT .= "--}</a></span> | ";
+ $OUT .= '--}</a></span> | ';
}
// Finish navigation link
}
// Generate a hash for extra-security for all passwords
-function generateHash ($plainText, $salt = '') {
+function generateHash ($plainText, $salt = '', $hash = true) {
+ // Debug output
+ //* DEBUG: */ outputHtml('plainText=' . $plainText . ',salt=' . $salt . ',hash='.intval($hash).'<br />');
+
// Is the required extension 'sql_patches' there and a salt is not given?
- if (((isExtensionInstalledAndOlder('sql_patches', '0.3.6')) || (!isExtensionActive('sql_patches')) || (!isExtensionInstalledAndNewer('other', '0.2.5'))) && (empty($salt))) {
+ // 0123 4 43 3 4 432 2 3 32 2 3 3210
+ if ((((isExtensionInstalledAndOlder('sql_patches', '0.3.6')) && (empty($salt))) || (!isExtensionActive('sql_patches')) || (!isExtensionInstalledAndNewer('other', '0.2.5')))) {
// Extension sql_patches is missing/outdated so we hash the plain text with MD5
- return md5($plainText);
+ if ($hash === true) {
+ // Is plain password
+ return md5($plainText);
+ } else {
+ // Is already a hash
+ return $plainText;
+ }
} // END - if
// Do we miss an arry element here?
// When the salt is empty build a new one, else use the first x configured characters as the salt
if (empty($salt)) {
- // Build server string (inc/databases.php is no longer updated with every commit)
+ // Build server string for more entropy
$server = $_SERVER['PHP_SELF'] . getConfig('ENCRYPT_SEPERATOR') . detectUserAgent() . getConfig('ENCRYPT_SEPERATOR') . getenv('SERVER_SOFTWARE') . getConfig('ENCRYPT_SEPERATOR') . detectRemoteAddr();
// Build key string
// Generate SHA1 sum from modula of number and the prime number
$sha1 = sha1(($a % getConfig('_PRIME')) . $server . getConfig('ENCRYPT_SEPERATOR') . $keys . getConfig('ENCRYPT_SEPERATOR') . $data . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY') . getConfig('ENCRYPT_SEPERATOR') . $a);
- //* DEBUG: */ outputHtml("SHA1=" . $sha1." (".strlen($sha1).")<br />");
+ //* DEBUG: */ outputHtml('SHA1=' . $sha1.' ('.strlen($sha1).')<br />');
$sha1 = scrambleString($sha1);
- //* DEBUG: */ outputHtml("Scrambled=" . $sha1." (".strlen($sha1).")<br />");
+ //* DEBUG: */ outputHtml('Scrambled=' . $sha1.' ('.strlen($sha1).')<br />');
//* DEBUG: */ $sha1b = descrambleString($sha1);
- //* DEBUG: */ outputHtml("Descrambled=" . $sha1b." (".strlen($sha1b).")<br />");
+ //* DEBUG: */ outputHtml('Descrambled=' . $sha1b.' ('.strlen($sha1b).')<br />');
// Generate the password salt string
$salt = substr($sha1, 0, getConfig('salt_length'));
- //* DEBUG: */ outputHtml($salt." (".strlen($salt).")<br />");
+ //* DEBUG: */ outputHtml($salt.' ('.strlen($salt).')<br />');
} else {
// Use given salt
- //* DEBUG: */ print 'salt=' . $salt . '<br />';
+ //* DEBUG: */ outputHtml('salt=' . $salt . '<br />');
$salt = substr($salt, 0, getConfig('salt_length'));
- //* DEBUG: */ print 'salt=' . $salt . '(' . strlen($salt) . '/' . getConfig('salt_length') . ')<br />';
+ //* DEBUG: */ outputHtml('salt=' . $salt . '(' . strlen($salt) . '/' . getConfig('salt_length') . ')<br />');
// Sanity check on salt
if (strlen($salt) != getConfig('salt_length')) {
} // END - if
}
+ // Generate final hash (for debug output)
+ $finalHash = $salt . sha1($salt . $plainText);
+
+ // Debug output
+ //* DEBUG: */ outputHtml('finalHash=' . $finalHash);
+
// Return hash
- return $salt.sha1($salt . $plainText);
+ return $finalHash;
}
// Scramble a string
$scrambleNums = explode(':', genScrambleString(strlen($str)));
}
+ // Compare both lengths and abort if different
+ if (strlen($str) != count($scrambleNums)) return $str;
+
// Scramble string here
- //* DEBUG: */ outputHtml("***Original=" . $str."***<br />");
+ //* DEBUG: */ outputHtml('***Original=' . $str.'***<br />');
for ($idx = '0'; $idx < strlen($str); $idx++) {
// Get char on scrambled position
$char = substr($str, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ outputHtml("***Scrambled=" . $scrambled."***<br />");
+ //* DEBUG: */ outputHtml('***Scrambled=' . $scrambled.'***<br />');
return $scrambled;
}
// Begin descrambling
$orig = str_repeat(' ', 40);
- //* DEBUG: */ outputHtml("+++Scrambled=" . $str."+++<br />");
+ //* DEBUG: */ outputHtml('+++Scrambled=' . $str.'+++<br />');
for ($idx = '0'; $idx < 40; $idx++) {
$char = substr($str, $idx, 1);
$orig = substr_replace($orig, $char, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ outputHtml("+++Original=" . $orig."+++<br />");
+ //* DEBUG: */ outputHtml('+++Original=' . $orig.'+++<br />');
return $orig;
}
}
// Generate an PGP-like encrypted hash of given hash for e.g. cookies
-function generatePassString ($passHash) {
+function encodeHashForCookie ($passHash) {
// Return vanilla password hash
$ret = $passHash;
// Is a secret key and master salt already initialized?
- if ((isExtensionInstalled('sql_patches')) && (isExtensionInstalledAndNewer('other', '0.2.5')) && (isConfigEntrySet('_PRIME')) && (isConfigEntrySet('secret_key')) && (isConfigEntrySet('master_salt'))) {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, intval(isExtensionInstalled('sql_patches')) . '/' . intval(isConfigEntrySet('_PRIME')) . '/' . intval(isConfigEntrySet('secret_key')) . '/' . intval(isConfigEntrySet('master_salt')));
+ if ((isExtensionInstalled('sql_patches')) && (isConfigEntrySet('_PRIME')) && (isConfigEntrySet('secret_key')) && (isConfigEntrySet('master_salt'))) {
// Only calculate when the secret key is generated
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '/' . strlen(getConfig('secret_key')));
+ if ((strlen($passHash) != 49) || (strlen(getConfig('secret_key')) != 40)) {
+ // Both keys must have same length so return unencrypted
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '!=49/' . strlen(getConfig('secret_key')) . '!=40');
+ return $ret;
+ } // END - if
+
$newHash = ''; $start = 9;
- for ($idx = '0'; $idx < 10; $idx++) {
- $part1 = hexdec(substr($passHash, $start, 4));
- $part2 = hexdec(substr(getConfig('secret_key'), $start, 4));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'passHash=' . $passHash . '(' . strlen($passHash) . ')');
+ for ($idx = 0; $idx < 20; $idx++) {
+ $part1 = hexdec(substr($passHash, ($idx * 2) + (strlen($passHash) - strlen(getConfig('secret_key'))), 2));
+ $part2 = hexdec(substr(getConfig('secret_key'), $start, 2));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2);
$mod = dechex($idx);
if ($part1 > $part2) {
$mod = dechex(sqrt(($part1 - $part2) * getConfig('_PRIME') / pi()));
} elseif ($part2 > $part1) {
$mod = dechex(sqrt(($part2 - $part1) * getConfig('_PRIME') / pi()));
}
- $mod = substr($mod, 0, 4);
- //* DEBUG: */ outputHtml('part1='.$part1.'/part2='.$part2.'/mod=' . $mod . '('.strlen($mod).')<br />');
- $mod = str_repeat(0, (4 - strlen($mod))) . $mod;
- //* DEBUG: */ outputHtml('*' . $start . '=' . $mod . '*<br />');
- $start += 4;
+ $mod = substr($mod, 0, 2);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2 . '/mod=' . $mod . '(' . strlen($mod) . ')');
+ $mod = str_repeat(0, (2 - strlen($mod))) . $mod;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'mod(' . ($idx * 2) . ')=' . $mod . '*');
+ $start += 2;
$newHash .= $mod;
} // END - for
- //* DEBUG: */ print($passHash.'<br />' . $newHash." (".strlen($newHash).')<br />');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, $passHash . ',' . $newHash . ' (' . strlen($newHash) . ')');
$ret = generateHash($newHash, getConfig('master_salt'));
- //* DEBUG: */ print('ret='.$ret.'<br />');
- } else {
- // Hash it simple
- //* DEBUG: */ outputHtml("--" . $passHash."--<br />");
- $ret = md5($passHash);
- //* DEBUG: */ outputHtml("++" . $ret."++<br />");
- }
+ } // END - if
// Return result
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'ret=' . $ret . '');
return $ret;
}
// Make sure, that the script realy realy diese here and now
$GLOBALS['app_died'] = true;
+ // Set content type as text/html
+ setContentType('text/html');
+
// Load header
loadIncludeOnce('inc/header.php');
$message = sprintf(getMessage('MXCHANGE_HAS_DIED'), basename($F), $L, $message);
// Better log this message away
- logDebugMessage($F, $L, $message);
+ if ($F != 'debug_report_bug') logDebugMessage($F, $L, $message);
// Load the message template
- loadTemplate('admin_settings_saved', false, $message);
+ loadTemplate('app_die_message', false, $message);
// Load footer
loadIncludeOnce('inc/footer.php');
);
// Load the template
- loadTemplate('show_timings', false, $content);
+ $GLOBALS['page_footer'] .= loadTemplate('show_timings', true, $content);
}
// Check wether a boolean constant is set
// In cache?
if (isset($GLOBALS['cache_array']['const'][$constName])) {
// Use cache
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-CACHE!<br />");
+ //* DEBUG: */ outputHtml(__FUNCTION__ . '(<font color="#0000aa">' . __LINE__ . '</font>): ' . $constName."-CACHE!<br />");
$res = ($GLOBALS['cache_array']['const'][$constName] === true);
} else {
// Check constant
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-RESOLVE!<br />");
+ //* DEBUG: */ outputHtml(__FUNCTION__ . '(<font color="#0000aa">' . __LINE__ . '</font>): ' . $constName."-RESOLVE!<br />");
if (defined($constName)) {
// Found!
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-FOUND!<br />");
+ //* DEBUG: */ outputHtml(__FUNCTION__ . '(<font color="#0000aa">' . __LINE__ . '</font>): ' . $constName."-FOUND!<br />");
$res = (constant($constName) === true);
} // END - if
$errorCode = getCode('UNKNOWN_STATUS');
// Generate constant name
- $codeName = sprintf("ID_%s", $status);
+ $codeName = sprintf("ACCOUNT_%s", strtoupper($status));
// Is the constant there?
if (isCodeSet($codeName)) {
return $errorCode;
}
-// Function to search for the last modifified file
-function searchDirsRecursive ($dir, &$last_changed) {
- // Get dir as array
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):dir=" . $dir.'<br />');
- // Does it match what we are looking for? (We skip a lot files already!)
- // RegexPattern to exclude ., .., .revision, .svn, debug.log or .cache in the filenames
- $excludePattern = '@(\.revision|debug\.log|\.cache|config\.php)$@';
- $ds = getArrayFromDirectory($dir, '', true, false, array(), '.php', $excludePattern);
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):ds[]=".count($ds).'<br />');
-
- // Walk through all entries
- foreach ($ds as $d) {
- // Generate proper FQFN
- $FQFN = str_replace('//', '/', getConfig('PATH') . $dir. '/'. $d);
-
- // Is it a file and readable?
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):FQFN={$FQFN}<br />");
- if (isDirectory($FQFN)) {
- // $FQFN is a directory so also crawl into this directory
- $newDir = $d;
- if (!empty($dir)) $newDir = $dir . '/'. $d;
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):DESCENT: " . $newDir.'<br />');
- searchDirsRecursive($newDir, $last_changed);
- } elseif (isFileReadable($FQFN)) {
- // $FQFN is a filename and no directory
- $time = filemtime($FQFN);
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):File: " . $d." found. (".($last_changed['time'] - $time).")<br />");
- if ($last_changed['time'] < $time) {
- // This file is newer as the file before
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>) - NEWER!<br />");
- $last_changed['path_name'] = $FQFN;
- $last_changed['time'] = $time;
- } // END - if
- }
- } // END - foreach
-}
-
-// "Getter" for revision/version data
-function getActualVersion ($type = 'Revision') {
- // By default nothing is new... ;-)
- $new = false;
-
- // Is the cache entry there?
- if (isset($GLOBALS['cache_array']['revision'][$type])) {
- // Found so increase cache hit
- incrementStatsEntry('cache_hits');
-
- // Return it
- return $GLOBALS['cache_array']['revision'][$type][0];
- } else {
- // FQFN of revision file
- $FQFN = sprintf("%s/.revision", getConfig('CACHE_PATH'));
-
- // Check if 'check_revision_data' is setted (switch for manually rewrite the .revision-File)
- if ((isGetRequestElementSet('check_revision_data')) && (getRequestElement('check_revision_data') == 'yes')) {
- // Forced rebuild of .revision file
- $new = true;
- } else {
- // Check for revision file
- if (!isFileReadable($FQFN)) {
- // Not found, so we need to create it
- $new = true;
- } else {
- // Revision file found
- $ins_vers = explode("\n", readFromFile($FQFN));
-
- // Get array for mapping information
- $mapper = array_flip(getSearchFor());
- //* DEBUG: */ print('<pre>mapper='.print_r($mapper, true).'</pre>ins_vers=<pre>'.print_r($ins_vers, true).'</pre>');
-
- // Is the content valid?
- if ((!is_array($ins_vers)) || (count($ins_vers) <= 0) || (!isset($ins_vers[$mapper[$type]])) || (trim($ins_vers[$mapper[$type]]) == '') || ($ins_vers[0]) == 'new') {
- // File needs update!
- $new = true;
- } else {
- // Generate fake cache entry
- foreach ($mapper as $map => $idx) {
- $GLOBALS['cache_array']['revision'][$map][0] = $ins_vers[$idx];
- } // END - foreach
-
- // Return found value
- return trim($ins_vers[$mapper[$type]]);
- }
- }
- }
-
- // Has it been updated?
- if ($new === true) {
- // Write it
- writeToFile($FQFN, implode("\n", getArrayFromActualVersion()));
-
- // ... and call recursive
- return getActualVersion($type);
- } // END - if
- }
-}
-
-// Repares an array we are looking for
-// The returned Array is needed twice (in getArrayFromActualVersion() and in getActualVersion() in the old .revision-fallback) so I puted it in an extra function to not polute the global namespace
-function getSearchFor () {
- // Add Revision, Date, Tag and Author
- $searchFor = array('Revision', 'Date', 'Tag', 'Author', 'File');
-
- // Return the created array
- return $searchFor;
-}
-
-// @TODO Please describe this function
-function getArrayFromActualVersion () {
- // Init variables
- $next_dir = '';
-
- // Directory to start with search
- $last_changed = array(
- 'path_name' => '',
- 'time' => 0
- );
-
- // Init return array
- $akt_vers = array();
-
- // Init value for counting the founded keywords
- $res = '0';
-
- // Searches all Files and there date of the last modifikation and puts the newest File in $last_changed.
- searchDirsRecursive($next_dir, $last_changed); // @TODO small change to API to $last_changed = searchDirsRecursive($next_dir, $time);
-
- // Get file
- $last_file = readFromFile($last_changed['path_name']);
-
- // Get all the keywords to search for
- $searchFor = getSearchFor();
-
- // This foreach loops the $searchFor-Tags (array('Revision', 'Date', 'Tag', 'Author') --> could easaly extended in the future)
- foreach ($searchFor as $search) {
- // Searches for "$search-tag:VALUE$" or "$search-tag::VALUE$"(the stylish keywordversion ;-)) in the lates modified file
- $res += preg_match('@\$' . $search.'(:|::) (.*) \$@U', $last_file, $t);
- // This trimms the search-result and puts it in the $GLOBALS['cache_array']['revision']-return array
- if (isset($t[2])) $GLOBALS['cache_array']['revision'][$search] = trim($t[2]);
- } // END - foreach
-
- // Save the last-changed filename for debugging
- $GLOBALS['cache_array']['revision']['File'] = $last_changed['path_name'];
-
- // at least 3 keyword-Tags are needed for propper values
- if ($res && $res >= 3
- && isset($GLOBALS['cache_array']['revision']['Revision']) && $GLOBALS['cache_array']['revision']['Revision'] != ''
- && isset($GLOBALS['cache_array']['revision']['Date']) && $GLOBALS['cache_array']['revision']['Date'] != ''
- && isset($GLOBALS['cache_array']['revision']['Tag']) && $GLOBALS['cache_array']['revision']['Tag'] != '') {
- // Prepare content witch need special treadment
-
- // Prepare timestamp for date
- preg_match('@(....)-(..)-(..) (..):(..):(..)@', $GLOBALS['cache_array']['revision']['Date'], $match_d);
- $GLOBALS['cache_array']['revision']['Date'] = mktime($match_d[4], $match_d[5], $match_d[6], $match_d[2], $match_d[3], $match_d[1]);
-
- // Add author to the Tag if the author is set and is not quix0r (lead coder)
- if ((isset($GLOBALS['cache_array']['revision']['Author'])) && ($GLOBALS['cache_array']['revision']['Author'] != 'quix0r')) {
- $GLOBALS['cache_array']['revision']['Tag'] .= '-'.strtoupper($GLOBALS['cache_array']['revision']['Author']);
- } // END - if
-
- } else {
- // No valid Data from the last modificated file so read the Revision from the Server. Fallback-solution!! Should not be removed I think.
- $version = sendGetRequest('check-updates3.php');
-
- // Prepare content
- // Only sets not setted or not proper values to the Online-Server-Fallback-Solution
- if (!isset($GLOBALS['cache_array']['revision']['Revision']) || $GLOBALS['cache_array']['revision']['Revision'] == '') $GLOBALS['cache_array']['revision']['Revision'] = trim($version[10]);
- if (!isset($GLOBALS['cache_array']['revision']['Date']) || $GLOBALS['cache_array']['revision']['Date'] == '') $GLOBALS['cache_array']['revision']['Date'] = trim($version[9]);
- if (!isset($GLOBALS['cache_array']['revision']['Tag']) || $GLOBALS['cache_array']['revision']['Tag'] == '') $GLOBALS['cache_array']['revision']['Tag'] = trim($version[8]);
- if (!isset($GLOBALS['cache_array']['revision']['Author']) || $GLOBALS['cache_array']['revision']['Author'] == '') $GLOBALS['cache_array']['revision']['Author'] = 'quix0r';
- if (!isset($GLOBALS['cache_array']['revision']['File']) || $GLOBALS['cache_array']['revision']['File'] == '') $GLOBALS['cache_array']['revision']['File'] = trim($version[11]);
- }
-
- // Return prepared array
- return $GLOBALS['cache_array']['revision'];
-}
-
// Back-ported from the new ship-simu engine. :-)
function debug_get_printable_backtrace () {
// Init variable
return $backtrace;
}
+// A mail-able backtrace
+function debug_get_mailable_backtrace () {
+ // Init variable
+ $backtrace = '';
+
+ // Get and prepare backtrace for output
+ $backtraceArray = debug_backtrace();
+ foreach ($backtraceArray as $key => $trace) {
+ if (!isset($trace['file'])) $trace['file'] = __FUNCTION__;
+ if (!isset($trace['line'])) $trace['line'] = __LINE__;
+ if (!isset($trace['args'])) $trace['args'] = array();
+ $backtrace .= ($key+1) . '.:' . basename($trace['file']) . ':' . $trace['line'] . ', ' . $trace['function'] . '(' . count($trace['args']) . ")\n";
+ } // END - foreach
+
+ // Return the backtrace
+ return $backtrace;
+}
+
// Output a debug backtrace to the user
-function debug_report_bug ($message = '') {
+function debug_report_bug ($message = '', $sendEmail = true) {
// Is this already called?
if (isset($GLOBALS[__FUNCTION__])) {
// Other backtrace
} // END - if
// Add output
- $debug .= "Please report this bug at <a title=\"Direct link to the bug-tracker\" href=\"http://bugs.mxchange.org\" rel=\"external\" target=\"_blank\">bugs.mxchange.org</a> and include the logfile from <strong>" . str_replace(getConfig('PATH'), '', getConfig('CACHE_PATH')) . "debug.log</strong> in your report (you can now attach files):<pre>";
+ $debug .= "Please report this bug at <a title=\"Direct link to the bug-tracker\" href=\"http://bugs.mxchange.org\" rel=\"external\" target=\"_blank\">http://bugs.mxchange.org</a> and include the logfile from <strong>" . str_replace(getConfig('PATH'), '', getConfig('CACHE_PATH')) . "debug.log</strong> in your report (you can now attach files):<pre>";
$debug .= debug_get_printable_backtrace();
$debug .= "</pre>\nRequest-URI: " . getRequestUri()."<br />\n";
$debug .= "Thank you for finding bugs.";
+ // Send an email? (e.g. not wanted for evaluation errors)
+ if (($sendEmail === true) && (!isInstallationPhase())) {
+ // Prepare content
+ $content = array(
+ 'message' => trim($message),
+ 'backtrace' => trim(debug_get_mailable_backtrace())
+ );
+
+ // Send email to webmaster
+ sendAdminNotification(getMessage('DEBUG_REPORT_BUG_SUBJECT'), 'admin_report_bug', $content);
+ } // END - if
+
// And abort here
- // @TODO This cannot be rewritten to app_die(), try to find a solution for this.
- die($debug);
+ app_die(__FUNCTION__, __LINE__, $debug);
}
// Generates a ***weak*** seed
$message = '';
switch ($code) {
case '': break;
- case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
- case getCode('LOGOUT_FAILED') : $message = "<span class=\"guest_failed\">{--LOGOUT_FAILED--}</span>"; break;
- case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
- case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
- case getCode('ACCOUNT_LOCKED') : $message = getMessage('MEMBER_ACCOUNT_LOCKED_UNC'); break;
- case getCode('USER_404') : $message = getMessage('USER_404'); break;
- case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
- case getCode('ALREADY_CONFIRMED'): $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
- case getCode('WRONG_PASS') : $message = getMessage('LOGIN_WRONG_PASS'); break;
- case getCode('WRONG_ID') : $message = getMessage('LOGIN_WRONG_ID'); break;
- case getCode('ID_LOCKED') : $message = getMessage('LOGIN_ID_LOCKED'); break;
- case getCode('ID_UNCONFIRMED') : $message = getMessage('LOGIN_ID_UNCONFIRMED'); break;
- case getCode('ID_GUEST') : $message = getMessage('LOGIN_ID_GUEST'); break;
- case getCode('NO_COOKIES') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
- case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
- case getCode('MODULE_MEM_ONLY') : $message = sprintf(getMessage('MODULE_MEM_ONLY'), getRequestElement('mod')); break;
- case getCode('OVERLENGTH') : $message = getMessage('MEMBER_TEXT_OVERLENGTH'); break;
- case getCode('URL_FOUND') : $message = getMessage('MEMBER_TEXT_CONTAINS_URL'); break;
- case getCode('SUBJ_URL') : $message = getMessage('MEMBER_SUBJ_CONTAINS_URL'); break;
- case getCode('BLIST_URL') : $message = "{--MEMBER_URL_BLACK_LISTED--}<br />\n{--MEMBER_BLIST_TIME--}: ".generateDateTime(getRequestElement('blist'), 0); break;
- case getCode('NO_RECS_LEFT') : $message = getMessage('MEMBER_SELECTED_MORE_RECS'); break;
- case getCode('INVALID_TAGS') : $message = getMessage('MEMBER_HTML_INVALID_TAGS'); break;
- case getCode('MORE_POINTS') : $message = getMessage('MEMBER_MORE_POINTS_NEEDED'); break;
- case getCode('MORE_RECEIVERS1') : $message = getMessage('MEMBER_ENTER_MORE_RECEIVERS'); break;
- case getCode('MORE_RECEIVERS2') : $message = getMessage('MEMBER_NO_MORE_RECEIVERS_FOUND'); break;
- case getCode('MORE_RECEIVERS3') : $message = sprintf(getMessage('MEMBER_ENTER_MORE_MIN_RECEIVERS'), getConfig('order_min')); break;
- case getCode('INVALID_URL') : $message = getMessage('MEMBER_ENTER_INVALID_URL'); break;
+ case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
+ case getCode('LOGOUT_FAILED') : $message = '<span class="guest_failed">{--LOGOUT_FAILED--}</span>'; break;
+ case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
+ case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
+ case getCode('USER_404') : $message = getMessage('USER_404'); break;
+ case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
+ case getCode('ALREADY_CONFIRMED') : $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
+ case getCode('WRONG_PASS') : $message = getMessage('LOGIN_WRONG_PASS'); break;
+ case getCode('WRONG_ID') : $message = getMessage('LOGIN_WRONG_ID'); break;
+ case getCode('ACCOUNT_LOCKED') : $message = getMessage('LOGIN_STATUS_LOCKED'); break;
+ case getCode('ACCOUNT_UNCONFIRMED'): $message = getMessage('LOGIN_STATUS_UNCONFIRMED'); break;
+ case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_COOKIES_DISABLED'); break;
+ case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
+ case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
+ case getCode('MODULE_MEM_ONLY') : $message = getMaskedMessage('MODULE_MEM_ONLY', getRequestParameter('mod')); break;
+ case getCode('OVERLENGTH') : $message = getMessage('MEMBER_TEXT_OVERLENGTH'); break;
+ case getCode('URL_FOUND') : $message = getMessage('MEMBER_TEXT_CONTAINS_URL'); break;
+ case getCode('SUBJ_URL') : $message = getMessage('MEMBER_SUBJ_CONTAINS_URL'); break;
+ case getCode('BLIST_URL') : $message = "{--MEMBER_URL_BLACK_LISTED--}<br />\n{--MEMBER_BLIST_TIME--}: ".generateDateTime(getRequestParameter('blist'), 0); break;
+ case getCode('NO_RECS_LEFT') : $message = getMessage('MEMBER_SELECTED_MORE_RECS'); break;
+ case getCode('INVALID_TAGS') : $message = getMessage('MEMBER_HTML_INVALID_TAGS'); break;
+ case getCode('MORE_POINTS') : $message = getMessage('MEMBER_MORE_POINTS_NEEDED'); break;
+ case getCode('MORE_RECEIVERS1') : $message = getMessage('MEMBER_ENTER_MORE_RECEIVERS'); break;
+ case getCode('MORE_RECEIVERS2') : $message = getMessage('MEMBER_NO_MORE_RECEIVERS_FOUND'); break;
+ case getCode('MORE_RECEIVERS3') : $message = getMessage('MEMBER_ENTER_MORE_MIN_RECEIVERS'); break;
+ case getCode('INVALID_URL') : $message = getMessage('MEMBER_ENTER_INVALID_URL'); break;
+ case getCode('UNKNOWN_ERROR') : $message = getMessage('LOGIN_UNKNOWN_ERROR'); break;
+ case getCode('UNKNOWN_STATUS') : $message = getMessage('LOGIN_UNKNOWN_STATUS'); break;
case getCode('ERROR_MAILID'):
if (isExtensionActive('mailid', true)) {
$message = getMessage('ERROR_CONFIRMING_MAIL');
} else {
- $message = sprintf(getMessage('EXTENSION_PROBLEM_NOT_INSTALLED'), 'mailid');
+ $message = getMaskedMessage('EXTENSION_PROBLEM_NOT_INSTALLED', 'mailid');
}
break;
case getCode('EXTENSION_PROBLEM'):
- if (isGetRequestElementSet('ext')) {
- $message = generateExtensionInactiveNotInstalledMessage(getRequestElement('ext'));
+ if (isGetRequestParameterSet('ext')) {
+ $message = generateExtensionInactiveNotInstalledMessage(getRequestParameter('ext'));
} else {
$message = getMessage('EXTENSION_PROBLEM_UNSET_EXT');
}
break;
case getCode('URL_TLOCK'):
+ // @TODO Move this SQL code into a function, let's say 'getTimestampFromPoolId($id) ?
$result = SQL_QUERY_ESC("SELECT `timestamp` FROM `{?_MYSQL_PREFIX?}_pool` WHERE `id`=%s LIMIT 1",
- array(bigintval(getRequestElement('id'))), __FILE__, __LINE__);
+ array(bigintval(getRequestParameter('id'))), __FILE__, __LINE__);
// Load timestamp from last order
list($timestamp) = SQL_FETCHROW($result);
- $timestamp = generateDateTime($timestamp, 1);
// Free memory
SQL_FREERESULT($result);
+ // Translate it for templates
+ $timestamp = generateDateTime($timestamp, 1);
+
// Calculate hours...
$STD = round(getConfig('url_tlock') / 60 / 60);
default:
// Missing/invalid code
- $message = sprintf(getMessage('UNKNOWN_MAILID_CODE'), $code);
+ $message = getMaskedMessage('UNKNOWN_MAILID_CODE', $code);
// Log it
logDebugMessage(__FUNCTION__, __LINE__, $message);
} // END - if
// Write to temp file
- fputs($fp_tmp, $line);
+ fwrite($fp_tmp, $line);
} // END - while
// Close temp file
}
// Send notification to admin
function sendAdminNotification ($subject, $templateName, $content=array(), $userid = '0') {
- if (isExtensionInstalledAndNewer('admins', '0.4.1')) {
+ if ((isExtensionInstalledAndNewer('admins', '0.4.1')) && (function_exists('sendAdminsEmails'))) {
// Send new way
sendAdminsEmails($subject, $templateName, $content, $userid);
} else {
}
// Handle menu-depending failed logins and return the rendered content
-function handleLoginFailtures ($accessLevel) {
+function handleLoginFailures ($accessLevel) {
// Default output is empty ;-)
$OUT = '';
// Is the session data set?
- if ((isSessionVariableSet('mxchange_' . $accessLevel.'_failures')) && (isSessionVariableSet('mxchange_' . $accessLevel.'_last_fail'))) {
+ if ((isSessionVariableSet('mxchange_' . $accessLevel . '_failures')) && (isSessionVariableSet('mxchange_' . $accessLevel . '_last_failure'))) {
// Ignore zero values
- if (getSession('mxchange_' . $accessLevel.'_failures') > 0) {
+ if (getSession('mxchange_' . $accessLevel . '_failures') > 0) {
// Non-guest has login failures found, get both data and prepare it for template
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):accessLevel={$accessLevel}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "accessLevel={$accessLevel}<br />");
$content = array(
- 'login_failures' => getSession('mxchange_' . $accessLevel.'_failures'),
- 'last_failure' => generateDateTime(getSession('mxchange_' . $accessLevel.'_last_fail'), 2)
+ 'login_failures' => getSession('mxchange_' . $accessLevel . '_failures'),
+ 'last_failure' => generateDateTime(getSession('mxchange_' . $accessLevel . '_last_failure'), 2)
);
// Load template
} // END - if
// Reset session data
- setSession('mxchange_' . $accessLevel.'_failures', '');
- setSession('mxchange_' . $accessLevel.'_last_fail', '');
+ setSession('mxchange_' . $accessLevel . '_failures', '');
+ setSession('mxchange_' . $accessLevel . '_last_failure', '');
} // END - if
// Return rendered content
}
// Rebuild cache
-function rebuildCacheFile ($cache, $inc = '', $force = false) {
+function rebuildCache ($cache, $inc = '', $force = false) {
// Debug message
/* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, sprintf("cache=%s, inc=%s, force=%s", $cache, $inc, intval($force)));
// Is the include there?
if (isIncludeReadable($inc)) {
// And rebuild it from scratch
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): inc={$inc} - LOADED!<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "inc={$inc} - LOADED!<br />");
loadInclude($inc);
} else {
// Include not found!
if ((empty($mode)) && (isset($data['mode']))) $mode = $data['mode'];
// Generate receiver list
- $RECEIVER = generateReceiverList($data['cat'], $data['receiver'], $mode);
+ $receiver = generateReceiverList($data['cat'], $data['receiver'], $mode);
// Receivers added?
- if (!empty($RECEIVER)) {
+ if (!empty($receiver)) {
// Add bonus mail to queue
addBonusMailToQueue(
$data['subject'],
$data['text'],
- $RECEIVER,
+ $receiver,
$data['points'],
$data['seconds'],
$data['url'],
// Check if refid is set
if ((isset($GLOBALS['refid'])) && ($GLOBALS['refid'] > 0)) {
// This is fine...
- } elseif ((isGetRequestElementSet('user')) && (basename($_SERVER['PHP_SELF']) == 'click.php')) {
+ } elseif ((isGetRequestParameterSet('user')) && (basename($_SERVER['PHP_SELF']) == 'click.php')) {
// The variable user comes from the click-counter script click.php and we only accept this here
- $GLOBALS['refid'] = bigintval(getRequestElement('user'));
- } elseif (isPostRequestElementSet('refid')) {
+ $GLOBALS['refid'] = bigintval(getRequestParameter('user'));
+ } elseif (isPostRequestParameterSet('refid')) {
// Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
- $GLOBALS['refid'] = secureString(postRequestElement('refid'));
- } elseif (isGetRequestElementSet('refid')) {
+ $GLOBALS['refid'] = secureString(postRequestParameter('refid'));
+ } elseif (isGetRequestParameterSet('refid')) {
// Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
- $GLOBALS['refid'] = secureString(getRequestElement('refid'));
- } elseif (isGetRequestElementSet('ref')) {
+ $GLOBALS['refid'] = secureString(getRequestParameter('refid'));
+ } elseif (isGetRequestParameterSet('ref')) {
// Set refid=ref (the referal link uses such variable)
- $GLOBALS['refid'] = secureString(getRequestElement('ref'));
+ $GLOBALS['refid'] = secureString(getRequestParameter('ref'));
} elseif ((isSessionVariableSet('refid')) && (getSession('refid') != 0)) {
// Set session refid als global
$GLOBALS['refid'] = bigintval(getSession('refid'));
// Call the filter chain 'shutdown'
runFilterChain('shutdown', null);
- if (SQL_IS_LINK_UP()) {
+ // Check if not in installation phase and the link is up
+ if ((!isInstallationPhase()) && (SQL_IS_LINK_UP())) {
// Close link
SQL_CLOSE(__FILE__, __LINE__);
} elseif (!isInstallationPhase()) {
// Handle message codes from URL
function handleCodeMessage () {
- if (isGetRequestElementSet('code')) {
+ if (isGetRequestParameterSet('code')) {
// Default extension is 'unknown'
$ext = 'unknown';
// Is extension given?
- if (isGetRequestElementSet('ext')) $ext = getRequestElement('ext');
+ if (isGetRequestParameterSet('ext')) $ext = getRequestParameter('ext');
// Convert the 'code' parameter from URL to a human-readable message
- $message = getMessageFromErrorCode(getRequestElement('code'));
+ $message = getMessageFromErrorCode(getRequestParameter('code'));
// Load message template
loadTemplate('message', false, $message);
} // END - if
// Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXT_INACTIVE', $ext_name);
// Is an admin logged in?
if (isAdmin()) {
// Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ $message = getMaskedMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE', $ext_name);
} // END - if
// Return prepared message
} // END - if
// Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXT_NOT_INSTALLED', $ext_name);
// Is an admin logged in?
if (isAdmin()) {
// Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+ $message = getMaskedMessage('ADMIN_EXTENSION_PROBLEM_EXT_NOT_INSTALLED', $ext_name);
} // END - if
// Return prepared message
// Reads a directory recursively by default and searches for files not matching
// an exclusion pattern. You can now keep the exclusion pattern empty for reading
// a whole directory.
-function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true) {
+function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true, $suffix = '') {
// Add default entries we should exclude
$excludeArray[] = '.';
$excludeArray[] = '..';
// Remove double slashes
$FQFN = str_replace('//', '/', $FQFN);
- // Check if the base filename matches an exclusion pattern and if the pattern is not empty
+ // Check if the base filenname matches an exclusion pattern and if the pattern is not empty
if ((!empty($excludePattern)) && (preg_match($excludePattern, $baseFile, $match))) {
// These Lines are only for debugging!!
//* DEBUG: */ outputHtml('baseDir:' . $baseDir . '<br />');
// Skip this file
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "Invalid prefix in file " . $baseFile . ", prefix=" . $prefix);
continue;
+ } elseif ((!empty($suffix)) && (substr($baseFile, -(strlen($suffix . $extension)), (strlen($suffix . $extension))) != $suffix . $extension)) {
+ // Skip wrong suffix as well
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "Invalid suffix in file " . $baseFile . ", suffix=" . $suffix);
+ continue;
} elseif (!isFileReadable($FQFN)) {
// Not readable so skip it
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "File " . $FQFN . " is not readable!");
closedir($dirPointer);
// Sort array
- asort($files);
+ sort($files);
// Return array with include files
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, '- Left!');
$TITLE = '';
// Title decoration enabled?
- if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_left') != '')) $TITLE .= trim(getConfig('title_left'))." ";
+ if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_left') != '')) $TITLE .= trim(getConfig('title_left')) . ' ';
// Do we have some extra title?
if (isExtraTitleSet()) {
$pageTitle = $TITLE;
} elseif ((isInstalled()) && (isAdminRegistered())) {
// Installed, admin registered but no ext-sql_patches
- $pageTitle = '[-- ' . getConfig('MAIN_TITLE').' - '.getModuleTitle(getModule()) . ' --]';
+ $pageTitle = '[-- ' . getConfig('MAIN_TITLE') . ' - ' . getModuleTitle(getModule()) . ' --]';
} elseif ((isInstalled()) && (!isAdminRegistered())) {
// Installed but no admin registered
- $pageTitle = sprintf(getMessage('SETUP_OF_MXCHANGE'), getConfig('MAIN_TITLE'));
+ $pageTitle = getMessage('SETUP_OF_MXCHANGE');
} elseif ((!isInstalled()) || (!isAdminRegistered())) {
// Installation mode
$pageTitle = getMessage('INSTALLATION_OF_MXCHANGE');
}
// Return title
- return $pageTitle;
+ return decodeEntities($pageTitle);
}
// Checks wethere there is a cache file there. This function is cached.
// Do we have cached this result?
if (!isset($GLOBALS['template_cache'][$template])) {
// Generate FQFN
- $FQFN = sprintf("%s_compiled/templates/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
+ $FQFN = generateCacheFqfn($template);
// Is it there?
$GLOBALS['template_cache'][$template] = isFileReadable($FQFN);
// Is this cache flushed?
if ((isDebuggingTemplateCache() === false) && (isTemplateCached($template) === false) && ($eval != '404')) {
// Generate FQFN
- $FQFN = sprintf("%s_compiled/templates/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
+ $FQFN = generateCacheFqfn($template);
// Replace username with a call
$eval = str_replace('$username', '".getUsername()."', $eval);
// Check it again
if ((isDebuggingTemplateCache() === false) && (isTemplateCached($template))) {
// Generate FQFN
- $FQFN = sprintf("%s_compiled/templates/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
+ $FQFN = generateCacheFqfn($template);
// And read from it
$GLOBALS['template_eval'][$template] = readFromFile($FQFN);
$salt = substr(getSession('u_hash'), 0, -40);
// Now let's compare passwords
- $hash = generatePassString(getUserData('password'));
+ $hash = encodeHashForCookie(getUserData('password'));
// Does the hash match or should we change it?
- if (($hash == getSession('u_hash')) || (postRequestElement('pass1') == postRequestElement('pass2'))) {
+ if (($hash == getSession('u_hash')) || (postRequestParameter('pass1') == postRequestParameter('pass2'))) {
// Load the data
$content = getUserDataArray();
switch ($mode) {
case 'normal': break; // Do not add any special lines
case 'email': // Email was changed!
- $content['message'] = getMessage('MEMBER_CHANGED_EMAIL').": ".postRequestElement('old_email')."\n";
+ $content['message'] = getMessage('MEMBER_CHANGED_EMAIL').": ".postRequestParameter('old_email')."\n";
break;
case 'pass': // Password was changed
if (isExtensionActive('country')) {
// Replace code with description
- $content['country'] = generateCountryInfo(postRequestElement('country_code'));
+ $content['country'] = generateCountryInfo(postRequestParameter('country_code'));
} // END - if
// Merge content with data from POST
$sub_mem = getMessage('MEMBER_CHANGED_DATA');
// Output success message
- $content = "<span class=\"member_done\">{--MYDATA_MAIL_SENT--}</span>";
+ $content = '<span class="member_done">{--MYDATA_MAIL_SENT--}</span>';
break;
default: // Unsupported module!
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unsupported module %s detected.", $mod));
- $content = "<span class=\"member_failed\">{--UNKNOWN_MODULE--}</span>";
+ $content = '<span class="member_failed">{--UNKNOWN_MODULE--}</span>';
break;
} // END - switch
} else {
// Passwords mismatch
- $content = "<span class=\"member_failed\">{--MEMBER_PASSWORD_ERROR--}</span>";
+ $content = '<span class="member_failed">{--MEMBER_PASSWORD_ERROR--}</span>';
}
} else {
// Could not load profile
- $content = "<span class=\"member_failed\">{--MEMBER_CANNOT_LOAD_PROFILE--}</span>";
+ $content = '<span class="member_failed">{--MEMBER_CANNOT_LOAD_PROFILE--}</span>';
}
// Send email to user if required
$content = getMessage('CANNOT_SEND_ADMIN_MAILS');
} else {
// No mail to admin
- $content = "<span class=\"member_done\">{--MYDATA_MAIL_SENT--}</span>";
+ $content = '<span class="member_done">{--MYDATA_MAIL_SENT--}</span>';
}
} // END - if
}
// Generates a 'selection box' from given array
-function generateSelectionBoxFromArray ($options, $name, $optionValue, $optionContent) {
+function generateSelectionBoxFromArray ($options, $name, $optionValue, $optionContent='') {
// Start the output
$OUT = '<select name="' . $name . '" size="1" class="admin_select">
<option value="X" disabled="disabled">{--PLEASE_SELECT--}</option>';
// Walk through all options
foreach ($options as $option) {
// Add the <option> entry
- $OUT .= '<option value="' . $option[$optionValue] . '">' . $option[$optionContent] . '</option>';
+ if (empty($optionContent)) {
+ // ... from template
+ $OUT .= loadTemplate('select_' . $name . '_option', true, $option);
+ } else {
+ // Direct HTML code
+ $OUT .= '<option value="' . $option[$optionValue] . '">' . $option[$optionContent] . '</option>';
+ }
} // END - foreach
// Finish selection box
return $modCheck;
}
+// Encodes an URL for adding session id, etc.
+function encodeUrl ($url, $outputMode = '0') {
+ // Do we have already have a PHPSESSID inside or view.php is called? Then abort here
+ if ((strpos($url, session_name()) !== false) || (getOutputMode() == -3)) return $url;
+
+ // Do we have a valid session?
+ if (((!isset($GLOBALS['valid_session'])) || ($GLOBALS['valid_session'] === false) || (!isset($_COOKIE[session_name()]))) && (isSpider() === false)) {
+ // Invalid session
+ // Determine right seperator
+ $seperator = '&';
+ if (strpos($url, '?') === false) {
+ // No question mark
+ $seperator = '?';
+ } elseif ((getOutputMode() != '0') || ($outputMode != '0')) {
+ // Non-HTML mode
+ $seperator = '&';
+ }
+
+ // Add it to URL
+ if (session_id() != '') {
+ $url .= $seperator . session_name() . '=' . session_id();
+ } // END - if
+ } // END - if
+
+ // Add {?URL?} ?
+ if ((substr($url, 0, strlen(getConfig('URL'))) != getConfig('URL')) && (substr($url, 0, 7) != '{?URL?}') && (substr($url, 0, 7) != 'http://') && (substr($url, 0, 8) != 'https://')) {
+ // Add it
+ $url = '{?URL?}/' . $url;
+ } // END - if
+
+ // Return the URL
+ return $url;
+}
+
+// Simple check for spider
+function isSpider () {
+ // Get the UA
+ $userAgent = strtolower(detectUserAgent(true));
+
+ // It should not be empty, if so it is better a spider/bot
+ if (empty($userAgent)) return true;
+
+ // Is it a spider?
+ return ((strpos($userAgent, 'spider') !== false) || (strpos($userAgent, 'slurp') !== false) || (strpos($userAgent, 'bot') !== false) || (strpos($userAgent, 'archiver') !== false));
+}
+
+// Prepares the header for HTML output
+function loadHtmlHeader () {
+ // Determine the page title
+ $content['header_title'] = determinePageTitle();
+
+ // Output page header code
+ $GLOBALS['page_header'] = loadTemplate('page_header', true, $content);
+
+ // Include meta data in 'guest' module
+ if (getModule() == 'index') {
+ // Load meta data template
+ $GLOBALS['page_header'] .= loadTemplate('metadata', true);
+
+ // Add meta description to header
+ if ((isInstalled()) && (isAdminRegistered()) && (SQL_IS_LINK_UP())) {
+ // Add meta description not in admin and login module and when the script is installed
+ generateMetaDescriptionCode();
+ } // END - if
+ } // END - if
+
+ // Include more header data here
+ $GLOBALS['page_header'] .= loadTemplate('header', true);
+
+ // Include stylesheet
+ loadIncludeOnce('inc/stylesheet.php');
+
+ // Closing HEAD tag
+ $GLOBALS['page_header'] .= '</head>';
+}
+
+// Adds page header and footer to output array element
+function addPageHeaderFooter () {
+ // Init output
+ $OUT = '';
+
+ // Add them all together. This is maybe to simple
+ foreach (array('page_header', 'output', 'page_footer') as $pagePart) {
+ // Add page part if set
+ if (isset($GLOBALS[$pagePart])) $OUT .= $GLOBALS[$pagePart];
+ } // END - foreach
+
+ // Transfer $OUT to 'output'
+ $GLOBALS['output'] = $OUT;
+}
+
+// Generates meta description for current module and 'what' value
+function generateMetaDescriptionCode () {
+ // Only include from guest area
+ if (getModule() == 'index') {
+ // Construct dynamic description
+ $DESCR = '{?MAIN_TITLE?} '.trim(getConfig('title_middle')) . ' ' . getTitleFromMenu('guest', getWhat());
+
+ // Output it directly
+ $GLOBALS['page_header'] .= '<meta name="description" content="' . $DESCR . '" />';
+ } // END - if
+
+ // Remove depth
+ unset($GLOBALS['ref_level']);
+}
+
+// Generates an FQFN for template cache from the given template name
+function generateCacheFqfn ($template) {
+ // Is this cached?
+ if (!isset($GLOBALS['template_cache_fqfn'][$template])) {
+ // Generate the FQFN
+ $GLOBALS['template_cache_fqfn'][$template] = sprintf("%s_compiled/html/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
+ } // END - if
+
+ // Return it
+ return $GLOBALS['template_cache_fqfn'][$template];
+}
+
+// Function to search for the last modified file
+function searchDirsRecursive ($dir, &$last_changed, $lookFor = 'Date') {
+ // Get dir as array
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dir=' . $dir);
+ // Does it match what we are looking for? (We skip a lot files already!)
+ // RegexPattern to exclude ., .., .revision, .svn, debug.log or .cache in the filenames
+ $excludePattern = '@(\.revision|\.svn|debug\.log|\.cache|config\.php)$@';
+
+ $ds = getArrayFromDirectory($dir, '', false, true, array(), '.php', $excludePattern);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'count(ds)='.count($ds));
+
+ // Walk through all entries
+ foreach ($ds as $d) {
+ // Generate proper FQFN
+ $FQFN = str_replace('//', '/', getConfig('PATH') . $dir . '/' . $d);
+
+ // Is it a file and readable?
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dir=' . $dir . ',d=' . $d);
+ if (isFileReadable($FQFN)) {
+ // $FQFN is a readable file so extract the requested data from it
+ $check = extractRevisionInfoFromFile($FQFN, $lookFor);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File: ' . $d . ' found. check=' . $check);
+
+ // Is the file more recent?
+ if ((!isset($last_changed[$lookFor])) || ($last_changed[$lookFor] < $check)) {
+ // This file is newer as the file before
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'NEWER!');
+ $last_changed['path_name'] = $FQFN;
+ $last_changed[$lookFor] = $check;
+ } // END - if
+ } else {
+ // Not readable
+ /* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File: ' . $d . ' not readable or directory.');
+ }
+ } // END - foreach
+}
+
//////////////////////////////////////////////////
// AUTOMATICALLY RE-GENERATED MISSING FUNCTIONS //
//////////////////////////////////////////////////
} // END - if
if (!function_exists('http_build_query')) {
- // Taken from documentation on www.php.net, credits to Marco K. (Germany)
+ // Taken from documentation on www.php.net, credits to Marco K. (Germany) and some light mods by R.Haeder
function http_build_query($data, $prefix = '', $sep = '', $key = '') {
$ret = array();
foreach ((array)$data as $k => $v) {
$k = urlencode($prefix . $k);
} // END - if
- if ((!empty($key)) || ($key === 0)) $k = $key.'['.urlencode($k).']';
+ if ((!empty($key)) || ($key === 0)) $k = $key . '[' . urlencode($k) . ']';
if (is_array($v) || is_object($v)) {
array_push($ret, http_build_query($v, '', $sep, $k));