chdir($directory);
}
+use \Friendica\Core\Config;
+use \Friendica\Core\PConfig;
+
require_once("boot.php");
function poller_run(&$argv, &$argc){
unset($db_host, $db_user, $db_pass, $db_data);
};
+ if ($a->max_processes_reached())
+ return;
+
if (poller_max_connections_reached())
return;
return;
// Checking the number of workers
- if (poller_too_much_workers(1)) {
+ if (poller_too_much_workers()) {
poller_kill_stale_workers();
return;
}
if(($argc <= 1) OR ($argv[1] != "no_cron")) {
// Run the cron job that calls all other jobs
- proc_run("php","include/cron.php");
+ proc_run(PRIORITY_MEDIUM, "include/cron.php");
// Run the cronhooks job separately from cron for being able to use a different timing
- proc_run("php","include/cronhooks.php");
+ proc_run(PRIORITY_MEDIUM, "include/cronhooks.php");
// Cleaning dead processes
poller_kill_stale_workers();
sleep(4);
// Checking number of workers
- if (poller_too_much_workers(2))
+ if (poller_too_much_workers())
return;
+ $cooldown = Config::get("system", "worker_cooldown", 0);
+
$starttime = time();
- while ($r = q("SELECT * FROM `workerqueue` WHERE `executed` = '0000-00-00 00:00:00' ORDER BY `created` LIMIT 1")) {
+ while ($r = q("SELECT * FROM `workerqueue` WHERE `executed` = '0000-00-00 00:00:00' ORDER BY `priority`, `created` LIMIT 1")) {
+
+ // Constantly check the number of parallel database processes
+ if ($a->max_processes_reached())
+ return;
// Constantly check the number of available database connections to let the frontend be accessible at any time
if (poller_max_connections_reached())
return;
// Count active workers and compare them with a maximum value that depends on the load
- if (poller_too_much_workers(3))
+ if (poller_too_much_workers())
return;
q("UPDATE `workerqueue` SET `executed` = '%s', `pid` = %d WHERE `id` = %d AND `executed` = '0000-00-00 00:00:00'",
require_once($include);
- $funcname=str_replace(".php", "", basename($argv[0]))."_run";
+ $funcname = str_replace(".php", "", basename($argv[0]))."_run";
if (function_exists($funcname)) {
- logger("Process ".getmypid()." - ID ".$r[0]["id"].": ".$funcname." ".$r[0]["parameter"]);
+ logger("Process ".getmypid()." - Prio ".$r[0]["priority"]." - ID ".$r[0]["id"].": ".$funcname." ".$r[0]["parameter"]);
$funcname($argv, $argc);
- logger("Process ".getmypid()." - ID ".$r[0]["id"].": ".$funcname." - done");
+ if ($cooldown > 0) {
+ logger("Process ".getmypid()." - Prio ".$r[0]["priority"]." - ID ".$r[0]["id"].": ".$funcname." - in cooldown for ".$cooldown." seconds");
+ sleep($cooldown);
+ }
+
+ logger("Process ".getmypid()." - Prio ".$r[0]["priority"]." - ID ".$r[0]["id"].": ".$funcname." - done");
q("DELETE FROM `workerqueue` WHERE `id` = %d", intval($r[0]["id"]));
} else
// Fetch the max value from the config. This is needed when the system cannot detect the correct value by itself.
$max = get_config("system", "max_connections");
+ // Fetch the percentage level where the poller will get active
+ $maxlevel = get_config("system", "max_connections_level");
+ if ($maxlevel == 0)
+ $maxlevel = 75;
+
if ($max == 0) {
// the maximum number of possible user connections can be a system variable
$r = q("SHOW VARIABLES WHERE `variable_name` = 'max_user_connections'");
logger("Connection usage (user values): ".$used."/".$max, LOGGER_DEBUG);
- $level = $used / $max;
+ $level = ($used / $max) * 100;
- if ($level >= (3/4)) {
- logger("Maximum level (3/4) of user connections reached: ".$used."/".$max);
+ if ($level >= $maxlevel) {
+ logger("Maximum level (".$maxlevel."%) of user connections reached: ".$used."/".$max);
return true;
}
}
logger("Connection usage (system values): ".$used."/".$max, LOGGER_DEBUG);
- $level = $used / $max;
+ $level = $used / $max * 100;
- if ($level < (3/4))
+ if ($level < $maxlevel)
return false;
- logger("Maximum level (3/4) of system connections reached: ".$used."/".$max);
+ logger("Maximum level (".$level."%) of system connections reached: ".$used."/".$max);
return true;
}
*
*/
function poller_kill_stale_workers() {
- $r = q("SELECT `pid`, `executed` FROM `workerqueue` WHERE `executed` != '0000-00-00 00:00:00'");
+ $r = q("SELECT `pid`, `executed`, `priority`, `parameter` FROM `workerqueue` WHERE `executed` != '0000-00-00 00:00:00'");
- if (!is_array($r) || count($r) == 0) {
+ if (!dbm::is_result($r)) {
// No processing here needed
return;
}
intval($pid["pid"]));
else {
// Kill long running processes
+
+ // Check if the priority is in a valid range
+ if (!in_array($pid["priority"], array(PRIORITY_CRITICAL, PRIORITY_HIGH, PRIORITY_MEDIUM, PRIORITY_LOW, PRIORITY_NEGLIGIBLE)))
+ $pid["priority"] = PRIORITY_MEDIUM;
+
+ // Define the maximum durations
+ $max_duration_defaults = array(PRIORITY_CRITICAL => 360, PRIORITY_HIGH => 10, PRIORITY_MEDIUM => 60, PRIORITY_LOW => 180, PRIORITY_NEGLIGIBLE => 360);
+ $max_duration = $max_duration_defaults[$pid["priority"]];
+
+ $argv = json_decode($pid["parameter"]);
+ $argv[0] = basename($argv[0]);
+
+ // How long is the process already running?
$duration = (time() - strtotime($pid["executed"])) / 60;
- if ($duration > 180) {
- logger("Worker process ".$pid["pid"]." took more than 3 hours. It will be killed now.");
+ if ($duration > $max_duration) {
+ logger("Worker process ".$pid["pid"]." (".implode(" ", $argv).") took more than ".$max_duration." minutes. It will be killed now.");
posix_kill($pid["pid"], SIGTERM);
- // Question: If a process is stale: Should we remove it or should we reschedule it?
- // By now we rescheduling it. It's maybe not the wisest decision?
- q("UPDATE `workerqueue` SET `executed` = '0000-00-00 00:00:00', `pid` = 0 WHERE `pid` = %d",
+ // We killed the stale process.
+ // To avoid a blocking situation we reschedule the process at the beginning of the queue.
+ // Additionally we are lowering the priority.
+ q("UPDATE `workerqueue` SET `executed` = '0000-00-00 00:00:00', `created` = '%s',
+ `priority` = %d, `pid` = 0 WHERE `pid` = %d",
+ dbesc(datetime_convert()),
+ intval(PRIORITY_NEGLIGIBLE),
intval($pid["pid"]));
} else
- logger("Worker process ".$pid["pid"]." now runs for ".round($duration)." minutes. That's okay.", LOGGER_DEBUG);
+ logger("Worker process ".$pid["pid"]." (".implode(" ", $argv).") now runs for ".round($duration)." of ".$max_duration." allowed minutes. That's okay.", LOGGER_DEBUG);
}
}
-function poller_too_much_workers($stage) {
+function poller_too_much_workers() {
+
$queues = get_config("system", "worker_queues");
if ($queues == 0)
$queues = 4;
+ $maxqueues = $queues;
+
$active = poller_active_workers();
// Decrease the number of workers at higher load
$slope = $maxworkers / pow($maxsysload, $exponent);
$queues = ceil($slope * pow(max(0, $maxsysload - $load), $exponent));
- logger("Current load stage ".$stage.": ".$load." - maximum: ".$maxsysload." - current queues: ".$active." - maximum: ".$queues, LOGGER_DEBUG);
+ $s = q("SELECT COUNT(*) AS `total` FROM `workerqueue` WHERE `executed` = '0000-00-00 00:00:00'");
+ $entries = $s[0]["total"];
+
+ if (Config::get("system", "worker_fastlane", false) AND ($queues > 0) AND ($entries > 0) AND ($active >= $queues)) {
+ $s = q("SELECT `priority` FROM `workerqueue` WHERE `executed` = '0000-00-00 00:00:00' ORDER BY `priority` LIMIT 1");
+ $top_priority = $s[0]["priority"];
+
+ $s = q("SELECT `id` FROM `workerqueue` WHERE `priority` <= %d AND `executed` != '0000-00-00 00:00:00' LIMIT 1",
+ intval($top_priority));
+ $high_running = dbm::is_result($s);
+ if (!$high_running AND ($top_priority > PRIORITY_UNDEFINED) AND ($top_priority < PRIORITY_NEGLIGIBLE)) {
+ logger("There are jobs with priority ".$top_priority." waiting but none is executed. Open a fastlane.", LOGGER_DEBUG);
+ $queues = $active + 1;
+ }
+ }
+
+ logger("Current load: ".$load." - maximum: ".$maxsysload." - current queues: ".$active."/".$entries." - maximum: ".$queues."/".$maxqueues, LOGGER_DEBUG);
+
+ // Are there fewer workers running as possible? Then fork a new one.
+ if (!get_config("system", "worker_dont_fork") AND ($queues > ($active + 1)) AND ($entries > 1)) {
+ logger("Active workers: ".$active."/".$queues." Fork a new worker.", LOGGER_DEBUG);
+ $args = array("php", "include/poller.php", "no_cron");
+ $a = get_app();
+ $a->proc_run($args);
+ }
}
return($active >= $queues);