poller_kill_stale_workers();
}
+ // Count active workers and compare them with a maximum value that depends on the load
+ if (poller_too_much_workers()) {
+ logger('Pre check: Active worker limit reached, quitting.', LOGGER_DEBUG);
+ return;
+ }
+
// Do we have too few memory?
if ($a->min_memory_reached()) {
logger('Pre check: Memory limit reached, quitting.', LOGGER_DEBUG);
// We fetch the next queue entry that is about to be executed
while ($r = poller_worker_process()) {
+ foreach ($r AS $entry) {
+ // Assure that the priority is an integer value
+ $entry['priority'] = (int)$entry['priority'];
- // Assure that the priority is an integer value
- $r[0]['priority'] = (int)$r[0]['priority'];
-
- // If we got that queue entry we claim it for us
- if (!poller_claim_process($r[0])) {
- dba::unlock();
- continue;
- } else {
- // Fetch all workerqueue data while the table is still locked
- // This is redundant, but this speeds up the processing
- $entries = poller_total_entries();
- $top_priority = poller_highest_priority();
- $high_running = poller_process_with_priority_active($top_priority);
- dba::unlock();
+ // The work will be done
+ if (!poller_execute($entry)) {
+ logger('Process execution failed, quitting.', LOGGER_DEBUG);
+ return;
+ }
}
// To avoid the quitting of multiple pollers only one poller at a time will execute the check
if (Lock::set('poller_worker', 0)) {
// Count active workers and compare them with a maximum value that depends on the load
- if (poller_too_much_workers($entries, $top_priority, $high_running)) {
+ if (poller_too_much_workers()) {
logger('Active worker limit reached, quitting.', LOGGER_DEBUG);
return;
}
Lock::remove('poller_worker');
}
- // finally the work will be done
- if (!poller_execute($r[0])) {
- logger('Process execution failed, quitting.', LOGGER_DEBUG);
- return;
- }
-
- // Quit the poller once every hour
- if (time() > ($starttime + 3600)) {
+ // Quit the poller once every 5 minutes
+ if (time() > ($starttime + 300)) {
logger('Process lifetime reached, quitting.', LOGGER_DEBUG);
return;
}
*
* @return bool Are there too much workers running?
*/
-function poller_too_much_workers($entries = NULL, $top_priority = NULL, $high_running = NULL) {
+function poller_too_much_workers() {
$queues = Config::get("system", "worker_queues", 4);
$maxqueues = $queues;
$processlist = ' ('.implode(', ', $listitem).')';
}
- if (is_null($entries)) {
- $entries = poller_total_entries();
- }
+ $entries = poller_total_entries();
+
if (Config::get("system", "worker_fastlane", false) && ($queues > 0) && ($entries > 0) && ($active >= $queues)) {
- if (is_null($top_priority)) {
- $top_priority = poller_highest_priority();
- }
- if (is_null($high_running)) {
- $high_running = poller_process_with_priority_active($top_priority);
- }
+ $top_priority = poller_highest_priority();
+ $high_running = poller_process_with_priority_active($top_priority);
+
if (!$high_running && ($top_priority > PRIORITY_UNDEFINED) && ($top_priority < PRIORITY_NEGLIGIBLE)) {
logger("There are jobs with priority ".$top_priority." waiting but none is executed. Open a fastlane.", LOGGER_DEBUG);
$queues = $active + 1;
}
/**
- * @brief Returns the next worker process
+ * @brief Find and claim the next worker process for us
*
- * @return string SQL statement
+ * @return boolean Have we found something?
*/
-function poller_worker_process() {
-
+function find_worker_processes() {
// Check if we should pass some low priority process
$highest_priority = 0;
+ $found = false;
if (poller_passing_slow($highest_priority)) {
- dba::lock('workerqueue');
-
// Are there waiting processes with a higher priority than the currently highest?
- $r = q("SELECT * FROM `workerqueue`
- WHERE `executed` <= '%s' AND `priority` < %d
- ORDER BY `priority`, `created` LIMIT 1",
- dbesc(NULL_DATE),
- intval($highest_priority));
- if (dbm::is_result($r)) {
- return $r;
+ $result = dba::p("UPDATE `workerqueue` SET `executed` = ?, `pid` = ?
+ WHERE `executed` <= ? AND `priority` < ?
+ ORDER BY `priority`, `created` LIMIT 5",
+ datetime_convert(), getmypid(), NULL_DATE, $highest_priority);
+ if (dbm::is_result($result)) {
+ $found = (dba::num_rows($result) > 0);
}
- // Give slower processes some processing time
- $r = q("SELECT * FROM `workerqueue`
- WHERE `executed` <= '%s' AND `priority` > %d
- ORDER BY `priority`, `created` LIMIT 1",
- dbesc(NULL_DATE),
- intval($highest_priority));
-
- if (dbm::is_result($r)) {
- return $r;
+ dba::close($result);
+
+ if (!$found) {
+ // Give slower processes some processing time
+ $result = dba::p("UPDATE `workerqueue` SET `executed` = ?, `pid` = ?
+ WHERE `executed` <= ? AND `priority` > ?
+ ORDER BY `priority`, `created` LIMIT 1",
+ datetime_convert(), getmypid(), NULL_DATE, $highest_priority);
+ if (dbm::is_result($result)) {
+ $found = (dba::num_rows($result) > 0);
+ }
+ dba::close($result);
}
- } else {
- dba::lock('workerqueue');
}
// If there is no result (or we shouldn't pass lower processes) we check without priority limit
- if (!dbm::is_result($r)) {
- $r = q("SELECT * FROM `workerqueue` WHERE `executed` <= '%s' ORDER BY `priority`, `created` LIMIT 1", dbesc(NULL_DATE));
- }
-
- // We only unlock the tables here, when we got no data
- if (!dbm::is_result($r)) {
- dba::unlock();
+ if (!$found) {
+ $result = dba::p("UPDATE `workerqueue` SET `executed` = ?, `pid` = ? WHERE `executed` <= ? ORDER BY `priority`, `created` LIMIT 5",
+ datetime_convert(), getmypid(), NULL_DATE);
+ if (dbm::is_result($result)) {
+ $found = (dba::num_rows($result) > 0);
+ }
+ dba::close($result);
}
-
- return $r;
+ return $found;
}
/**
- * @brief Assigns a workerqueue entry to the current process
- *
- * When we are sure that the table locks are working correctly, we can remove the checks from here
- *
- * @param array $queue Workerqueue entry
+ * @brief Returns the next worker process
*
- * @return boolean "true" if the claiming was successful
+ * @return string SQL statement
*/
-function poller_claim_process($queue) {
- $mypid = getmypid();
+function poller_worker_process() {
- $success = dba::update('workerqueue', array('executed' => datetime_convert(), 'pid' => $mypid),
- array('id' => $queue["id"], 'pid' => 0));
+ $stamp = (float)microtime(true);
- if (!$success) {
- logger("Couldn't update queue entry ".$queue["id"]." - skip this execution", LOGGER_DEBUG);
- return false;
- }
+ $timeout = 10;
+ do {
+ $found = find_worker_processes();
+ } while (!$found && (poller_total_entries() > 0) && (--$timeout > 0));
- // Assure that there are no tasks executed twice
- $id = q("SELECT `pid`, `executed` FROM `workerqueue` WHERE `id` = %d", intval($queue["id"]));
- if (!$id) {
- logger("Queue item ".$queue["id"]." vanished - skip this execution", LOGGER_DEBUG);
- return false;
- } elseif ((strtotime($id[0]["executed"]) <= 0) || ($id[0]["pid"] == 0)) {
- logger("Entry for queue item ".$queue["id"]." wasn't stored - skip this execution", LOGGER_DEBUG);
- return false;
- } elseif ($id[0]["pid"] != $mypid) {
- logger("Queue item ".$queue["id"]." is to be executed by process ".$id[0]["pid"]." and not by me (".$mypid.") - skip this execution", LOGGER_DEBUG);
- return false;
+ logger('Duration: '.number_format(microtime(true) - $stamp, 3), LOGGER_DEBUG);
+
+ if ($found) {
+ $r = q("SELECT * FROM `workerqueue` WHERE `pid` = %d", intval(getmypid()));
}
- return true;
+ return $r;
}
/**
projects / friendica.git / blobdiff