<?php
-// There are two possible entry points. Both are called via POST.
+// There are two possible entry points.
-function dfrn_confirm_post(&$a) {
- if($a->argc > 1)
- $node = $a->argv[1];
+function dfrn_confirm_post(&$a,$handsfree = null) {
+
+ if(is_array($handsfree)) {
+
+ // called directly from dfrn_request due to automatic friend acceptance
+ // any $_POST parameters we may require are supplied in the $handsfree array
+
+ $node = $handsfree['node'];
+ $a->interactive = false; // notice() becomes a no-op since nobody is there to see it
+
+ }
+ else {
+ if($a->argc > 1)
+ $node = $a->argv[1];
+ }
// Main entry point. Our user received a friend request notification (perhaps
- // from another site) and clicked 'Accept'. $POST['source_url'] is not set.
- // They will perform the following:
+ // from another site) and clicked 'Approve'. $POST['source_url'] is not set.
+ // OR we have been called directly from dfrn_request ($handsfree != null) due to
+ // this being a page type which supports automatic friend acceptance.
if(! x($_POST,'source_url')) {
- $uid = get_uid();
+ $uid = ((is_array($handsfree)) ? $handsfree['uid'] : local_user());
if(! $uid) {
notice( t('Permission denied.') . EOL );
return;
}
- // These come from the friend request notification form.
-
- $dfrn_id = ((x($_POST,'dfrn_id')) ? notags(trim($_POST['dfrn_id'])) : "");
- $intro_id = intval($_POST['intro_id']);
- $duplex = intval($_POST['duplex']);
+ $user = q("SELECT * FROM `user` WHERE `uid` = %d LIMIT 1",
+ intval($uid)
+ );
+
+ if(! $user) {
+ notice( t('Profile not found.') . EOL );
+ return;
+ }
+
+
+ // These come from either the friend request notification form or $handsfree array.
+
+ if(is_array($handsfree)) {
+ $dfrn_id = $handsfree['dfrn_id'];
+ $intro_id = $handsfree['intro_id'];
+ $duplex = $handsfree['duplex'];
+ logger('dfrn_confirm: Confirm in handsfree mode');
+ }
+ else {
+ $dfrn_id = ((x($_POST,'dfrn_id')) ? notags(trim($_POST['dfrn_id'])) : "");
+ $intro_id = intval($_POST['intro_id']);
+ $duplex = intval($_POST['duplex']);
+ $cid = intval($_POST['contact_id']);
+ }
+
+ logger('dfrn_confirm: Confirming request for dfrn_id (issued) ' . $dfrn_id);
// The other person will have been issued an ID when they first requested friendship.
// Locate their record. At this time, their record will have both pending and blocked set to 1.
+ // There won't be any dfrn_id if this is a network follower, so use the contact_id instead.
- $r = q("SELECT * FROM `contact` WHERE `issued-id` = '%s' AND `uid` = %d LIMIT 1",
+ $r = q("SELECT * FROM `contact` WHERE ( ( `issued-id` != '' AND `issued-id` = '%s' ) OR ( `id` = %d AND `id` != 0 ) ) AND `uid` = %d LIMIT 1",
dbesc($dfrn_id),
+ intval($cid),
intval($uid)
);
return;
}
- $contact_id = $r[0]['id'];
- $relation = $r[0]['rel'];
- $site_pubkey = $r[0]['site-pubkey'];
- $dfrn_confirm = $r[0]['confirm'];
- $aes_allow = $r[0]['aes_allow'];
-
+ $contact = $r[0];
- // Generate a key pair for all further communications with this person.
- // We have a keypair for every contact, and a site key for unknown people.
- // This provides a means to carry on relationships with other people if
- // any single key is compromised. It is a robust key. We're much more
- // worried about key leakage than anybody cracking it.
+ $contact_id = $contact['id'];
+ $relation = $contact['rel'];
+ $site_pubkey = $contact['site-pubkey'];
+ $dfrn_confirm = $contact['confirm'];
+ $aes_allow = $contact['aes_allow'];
- $res = openssl_pkey_new(array(
- 'digest_alg' => 'whirlpool',
- 'private_key_bits' => 4096,
- 'encrypt_key' => false )
- );
+ $network = ((strlen($contact['issued-id'])) ? 'dfrn' : 'stat');
+ if($network === 'dfrn') {
- $private_key = '';
+ // Generate a key pair for all further communications with this person.
+ // We have a keypair for every contact, and a site key for unknown people.
+ // This provides a means to carry on relationships with other people if
+ // any single key is compromised. It is a robust key. We're much more
+ // worried about key leakage than anybody cracking it.
- openssl_pkey_export($res, $private_key);
-
- $pubkey = openssl_pkey_get_details($res);
- $public_key = $pubkey["key"];
-
- // Save the private key. Send them the public key.
+ $res = openssl_pkey_new(array(
+ 'digest_alg' => 'whirlpool',
+ 'private_key_bits' => 4096,
+ 'encrypt_key' => false )
+ );
- $r = q("UPDATE `contact` SET `prvkey` = '%s' WHERE `id` = %d AND `uid` = %d LIMIT 1",
- dbesc($private_key),
- intval($contact_id),
- intval($uid)
- );
+ $private_key = '';
- $params = array();
+ openssl_pkey_export($res, $private_key);
- // Per the protocol document, we will verify both ends by encrypting the dfrn_id with our
- // site private key (person on the other end can decrypt it with our site public key).
- // Then encrypt our profile URL with the other person's site public key. They can decrypt
- // it with their site private key. If the decryption on the other end fails for either
- // item, it indicates tampering or key failure on at least one site and we will not be
- // able to provide a secure communication pathway.
+ $pubkey = openssl_pkey_get_details($res);
+ $public_key = $pubkey["key"];
- // If other site is willing to accept full encryption, (aes_allow is 1 AND we have php5.3
- // or later) then we encrypt the personal public key we send them using AES-256-CBC and a
- // random key which is encrypted with their site public key.
+ // Save the private key. Send them the public key.
- $src_aes_key = random_string();
+ $r = q("UPDATE `contact` SET `prvkey` = '%s' WHERE `id` = %d AND `uid` = %d LIMIT 1",
+ dbesc($private_key),
+ intval($contact_id),
+ intval($uid)
+ );
- $result = '';
- openssl_private_encrypt($dfrn_id,$result,$a->user['prvkey']);
+ $params = array();
- $params['dfrn_id'] = bin2hex($result);
- $params['public_key'] = $public_key;
+ // Per the protocol document, we will verify both ends by encrypting the dfrn_id with our
+ // site private key (person on the other end can decrypt it with our site public key).
+ // Then encrypt our profile URL with the other person's site public key. They can decrypt
+ // it with their site private key. If the decryption on the other end fails for either
+ // item, it indicates tampering or key failure on at least one site and we will not be
+ // able to provide a secure communication pathway.
+ // If other site is willing to accept full encryption, (aes_allow is 1 AND we have php5.3
+ // or later) then we encrypt the personal public key we send them using AES-256-CBC and a
+ // random key which is encrypted with their site public key.
- $my_url = $a->get_baseurl() . '/profile/' . $a->user['nickname'];
+ $src_aes_key = random_string();
- openssl_public_encrypt($my_url, $params['source_url'], $site_pubkey);
- $params['source_url'] = bin2hex($params['source_url']);
+ $result = '';
+ openssl_private_encrypt($dfrn_id,$result,$user[0]['prvkey']);
- if($aes_allow && function_exists('openssl_encrypt')) {
- openssl_public_encrypt($src_aes_key, $params['aes_key'], $site_pubkey);
- $params['aes_key'] = bin2hex($params['aes_key']);
- $params['public_key'] = bin2hex(openssl_encrypt($public_key,'AES-256-CBC',$src_aes_key));
- }
+ $params['dfrn_id'] = bin2hex($result);
+ $params['public_key'] = $public_key;
- $params['dfrn_version'] = DFRN_PROTOCOL_VERSION ;
- if($duplex == 1)
- $params['duplex'] = 1;
- // POST all this stuff to the other site.
+ $my_url = $a->get_baseurl() . '/profile/' . $user[0]['nickname'];
- $res = post_url($dfrn_confirm,$params);
+ openssl_public_encrypt($my_url, $params['source_url'], $site_pubkey);
+ $params['source_url'] = bin2hex($params['source_url']);
- // Now figure out what they responded. Try to be robust if the remote site is
- // having difficulty and throwing up errors of some kind.
+ if($aes_allow && function_exists('openssl_encrypt')) {
+ openssl_public_encrypt($src_aes_key, $params['aes_key'], $site_pubkey);
+ $params['aes_key'] = bin2hex($params['aes_key']);
+ $params['public_key'] = bin2hex(openssl_encrypt($public_key,'AES-256-CBC',$src_aes_key));
+ }
- $leading_junk = substr($res,0,strpos($res,'<?xml'));
+ $params['dfrn_version'] = DFRN_PROTOCOL_VERSION ;
+ if($duplex == 1)
+ $params['duplex'] = 1;
- $res = substr($res,strpos($res,'<?xml'));
- if(! strlen($res)) {
+ logger('dfrn_confirm: Confirm: posted data: ' . print_r($params,true), LOGGER_DATA);
- // No XML at all, this exchange is messed up really bad.
- // We shouldn't proceed, because the xml parser might choke,
- // and $status is going to be zero, which indicates success.
- // We can hardly call this a success.
+ // POST all this stuff to the other site.
- notice( t('Response from remote site was not understood.') . EOL);
- return;
- }
+ $res = post_url($dfrn_confirm,$params);
- if(strlen($leading_junk) && get_config('system','debugging')) {
+ logger('dfrn_confirm: Confirm: received data: ' . $res, LOGGER_DATA);
- // This might be more common. Mixed error text and some XML.
- // If we're configured for debugging, show the text. Proceed in either case.
+ // Now figure out what they responded. Try to be robust if the remote site is
+ // having difficulty and throwing up errors of some kind.
- notice( t('Unexpected response from remote site: ') . EOL . $leading_junk . EOL );
- }
+ $leading_junk = substr($res,0,strpos($res,'<?xml'));
- $xml = simplexml_load_string($res);
- $status = (int) $xml->status;
- $message = unxmlify($xml->message); // human readable text of what may have gone wrong.
- switch($status) {
- case 0:
- notice( t("Confirmation completed successfully.") . EOL);
- if(strlen($message))
- notice( t('Remote site reported: ') . $message . EOL);
- break;
- case 1:
- // birthday paradox - generate new dfrn-id and fall through.
- $new_dfrn_id = random_string();
- $r = q("UPDATE contact SET `issued-id` = '%s' WHERE `id` = %d AND `uid` = %d LIMIT 1",
- dbesc($new_dfrn_id),
- intval($contact_id),
- intval($uid)
- );
+ $res = substr($res,strpos($res,'<?xml'));
+ if(! strlen($res)) {
- case 2:
- notice( t("Temporary failure. Please wait and try again.") . EOL);
- if(strlen($message))
- notice( t('Remote site reported: ') . $message . EOL);
- break;
+ // No XML at all, this exchange is messed up really bad.
+ // We shouldn't proceed, because the xml parser might choke,
+ // and $status is going to be zero, which indicates success.
+ // We can hardly call this a success.
+
+ notice( t('Response from remote site was not understood.') . EOL);
+ return;
+ }
+ if(strlen($leading_junk) && get_config('system','debugging')) {
+
+ // This might be more common. Mixed error text and some XML.
+ // If we're configured for debugging, show the text. Proceed in either case.
- case 3:
- notice( t("Introduction failed or was revoked.") . EOL);
- if(strlen($message))
- notice( t('Remote site reported: ') . $message . EOL);
- break;
+ notice( t('Unexpected response from remote site: ') . EOL . $leading_junk . EOL );
}
- if(($status == 0) && ($intro_id)) {
-
- // Success. Delete the notification.
+ $xml = simplexml_load_string($res);
+ $status = (int) $xml->status;
+ $message = unxmlify($xml->message); // human readable text of what may have gone wrong.
+ switch($status) {
+ case 0:
+ notice( t("Confirmation completed successfully.") . EOL);
+ if(strlen($message))
+ notice( t('Remote site reported: ') . $message . EOL);
+ break;
+ case 1:
+ // birthday paradox - generate new dfrn-id and fall through.
+ $new_dfrn_id = random_string();
+ $r = q("UPDATE contact SET `issued-id` = '%s' WHERE `id` = %d AND `uid` = %d LIMIT 1",
+ dbesc($new_dfrn_id),
+ intval($contact_id),
+ intval($uid)
+ );
+
+ case 2:
+ notice( t("Temporary failure. Please wait and try again.") . EOL);
+ if(strlen($message))
+ notice( t('Remote site reported: ') . $message . EOL);
+ break;
+
+
+ case 3:
+ notice( t("Introduction failed or was revoked.") . EOL);
+ if(strlen($message))
+ notice( t('Remote site reported: ') . $message . EOL);
+ break;
+ }
+
+ if(($status == 0) && ($intro_id)) {
+
+ // Success. Delete the notification.
+
+ $r = q("DELETE FROM `intro` WHERE `id` = %d AND `uid` = %d LIMIT 1",
+ intval($intro_id),
+ intval($uid)
+ );
+
+ }
- $r = q("DELETE FROM `intro` WHERE `id` = %d AND `uid` = %d LIMIT 1",
- intval($intro_id),
- intval($uid)
- );
-
+ if($status != 0)
+ return;
}
- if($status != 0)
- return;
-
// We have now established a relationship with the other site.
// Let's make our own personal copy of their profile photo so we don't have
// to always load it from their site.
require_once("Photo.php");
- $photo_failure = false;
-
- $r = q("SELECT `photo` FROM `contact` WHERE `id` = %d LIMIT 1",
- intval($contact_id));
- if(count($r)) {
-
- $filename = basename($r[0]['photo']);
- $img_str = fetch_url($r[0]['photo'],true);
- $img = new Photo($img_str);
- if($img->is_valid()) {
-
- $img->scaleImageSquare(175);
-
- $hash = photo_new_resource();
-
- $r = $img->store($uid, $contact_id, $hash, $filename, t('Contact Photos'), 4 );
+ $photos = import_profile_photo($contact['photo'],$uid,$contact_id);
+
+ logger('dfrn_confirm: confirm - imported photos');
+
+ if($network === 'dfrn') {
+
+ $new_relation = REL_VIP;
+ if(($relation == REL_FAN) || ($duplex))
+ $new_relation = REL_BUD;
+
+ if(($relation == REL_FAN) && ($duplex))
+ $duplex = 0;
+
+ $r = q("UPDATE `contact` SET `photo` = '%s',
+ `thumb` = '%s',
+ `micro` = '%s',
+ `rel` = %d,
+ `name-date` = '%s',
+ `uri-date` = '%s',
+ `avatar-date` = '%s',
+ `blocked` = 0,
+ `pending` = 0,
+ `duplex` = %d,
+ `network` = 'dfrn' WHERE `id` = %d LIMIT 1
+ ",
+ dbesc($photos[0]),
+ dbesc($photos[1]),
+ dbesc($photos[2]),
+ intval($new_relation),
+ dbesc(datetime_convert()),
+ dbesc(datetime_convert()),
+ dbesc(datetime_convert()),
+ intval($duplex),
+ intval($contact_id)
+ );
+ }
+ else {
- if($r === false)
- $photo_failure = true;
+ $notify = '';
+ $poll = '';
- $img->scaleImage(80);
+ // $network !== 'dfrn'
- $r = $img->store($uid, $contact_id, $hash, $filename, t('Contact Photos'), 5 );
+ $arr = lrdd($contact['url']);
+ if(count($arr)) {
+ foreach($arr as $link) {
+ if($link['@attributes']['rel'] === 'salmon')
+ $notify = $link['@attributes']['href'];
+ if($link['@attributes']['rel'] === NAMESPACE_FEED)
+ $poll = $link['@attributes']['href'];
+ }
+ }
- if($r === false)
- $photo_failure = true;
+ $r = q("DELETE FROM `intro` WHERE `id` = %d AND `uid` = %d LIMIT 1",
+ intval($intro_id),
+ intval($uid)
+ );
- $photo = $a->get_baseurl() . '/photo/' . $hash . '-4.jpg';
- $thumb = $a->get_baseurl() . '/photo/' . $hash . '-5.jpg';
- }
- else
- $photo_failure = true;
- }
- else
- $photo_failure = true;
- if($photo_failure) {
- $photo = $a->get_baseurl() . '/images/default-profile.jpg';
- $thumb = $a->get_baseurl() . '/images/default-profile-sm.jpg';
+ $r = q("UPDATE `contact` SET `photo` = '%s',
+ `thumb` = '%s',
+ `micro` = '%s',
+ `name-date` = '%s',
+ `uri-date` = '%s',
+ `avatar-date` = '%s',
+ `notify` = '%s',
+ `poll` = '%s',
+ `blocked` = 0,
+ `pending` = 0,
+ `network` = 'stat'
+ WHERE `id` = %d LIMIT 1
+ ",
+ dbesc($photos[0]),
+ dbesc($photos[1]),
+ dbesc($photos[2]),
+ dbesc(datetime_convert()),
+ dbesc(datetime_convert()),
+ dbesc(datetime_convert()),
+ dbesc($notify),
+ dbesc($poll),
+ intval($contact_id)
+ );
}
- $new_relation = REL_VIP;
- if(($relation == REL_FAN) || ($duplex))
- $new_relation = REL_BUD;
-
- $r = q("UPDATE `contact` SET `photo` = '%s',
- `thumb` = '%s',
- `rel` = %d,
- `name-date` = '%s',
- `uri-date` = '%s',
- `avatar-date` = '%s',
- `blocked` = 0,
- `pending` = 0,
- `duplex` = %d,
- `network` = 'dfrn' WHERE `id` = %d LIMIT 1
- ",
- dbesc($photo),
- dbesc($thumb),
- intval($new_relation),
- dbesc(datetime_convert()),
- dbesc(datetime_convert()),
- dbesc(datetime_convert()),
- intval($duplex),
- intval($contact_id)
- );
if($r === false)
- notice( t('Unable to set contact photo.') . EOL);
+ notice( t('Unable to set contact photo.') . EOL);
// Let's send our user to the contact editor in case they want to
// do anything special with this new friend.
-
- goaway($a->get_baseurl() . '/contacts/' . intval($contact_id));
+
+ if($handsfree === null)
+ goaway($a->get_baseurl() . '/contacts/' . intval($contact_id));
return; //NOTREACHED
+
}
$aes_key = $_POST['aes_key'];
$duplex = $_POST['duplex'];
$version_id = (float) $_POST['dfrn_version'];
+
+ logger('dfrn_confirm: requestee contacted: ' . $node);
+ logger('dfrn_confirm: request: POST=' . print_r($_POST,true), LOGGER_DATA);
// If $aes_key is set, both of these items require unpacking from the hex transport encoding.
}
$r = q("SELECT * FROM `contact` WHERE `dfrn-id` = '%s' LIMIT 1",
- dbesc($decrypted_dfrn_id),
- intval($local_uid)
+ dbesc($decrypted_dfrn_id)
);
if(count($r)) {
$message = t('The ID provided by your system is a duplicate on our system. It should work if you try again.');
// We're good but now we have to scrape the profile photo and send notifications.
- require_once("Photo.php");
- $photo_failure = false;
$r = q("SELECT `photo` FROM `contact` WHERE `id` = %d LIMIT 1",
intval($dfrn_record));
- if(count($r)) {
-
- $filename = basename($r[0]['photo']);
- $img_str = fetch_url($r[0]['photo'],true);
- $img = new Photo($img_str);
- if($img->is_valid()) {
-
- $img->scaleImageSquare(175);
-
- $hash = photo_new_resource();
- $r = $img->store($local_uid, $dfrn_record, $hash, $filename, t('Contact Photos') , 4);
-
- if($r === false)
- $photo_failure = true;
-
- $img->scaleImage(80);
- $r = $img->store($local_uid, $dfrn_record, $hash, $filename, t('Contact Photos') , 5);
-
- if($r === false)
- $photo_failure = true;
-
- $photo = $a->get_baseurl() . '/photo/' . $hash . '-4.jpg';
- $thumb = $a->get_baseurl() . '/photo/' . $hash . '-5.jpg';
- }
- else
- $photo_failure = true;
- }
+ if(count($r))
+ $photo = $r[0]['photo'];
else
- $photo_failure = true;
-
- if($photo_failure) {
$photo = $a->get_baseurl() . '/images/default-profile.jpg';
- $thumb = $a->get_baseurl() . '/images/default-profile-sm.jpg';
- }
+
+ require_once("Photo.php");
+
+ $photos = import_profile_photo($photo,$local_uid,$dfrn_record);
+
+ logger('dfrn_confirm: request - photos imported');
$new_relation = REL_FAN;
if(($relation == REL_VIP) || ($duplex))
$new_relation = REL_BUD;
+ if(($relation == REL_VIP) && ($duplex))
+ $duplex = 0;
+
$r = q("UPDATE `contact` SET
`photo` = '%s',
`thumb` = '%s',
+ `micro` = '%s',
`rel` = %d,
`name-date` = '%s',
`uri-date` = '%s',
`duplex` = %d,
`network` = 'dfrn' WHERE `id` = %d LIMIT 1
",
- dbesc($photo),
- dbesc($thumb),
+ dbesc($photos[0]),
+ dbesc($photos[1]),
+ dbesc($photos[2]),
intval($new_relation),
dbesc(datetime_convert()),
dbesc(datetime_convert()),
intval($duplex),
intval($dfrn_record)
);
- if($r === false) { // indicates schema is messed up or total db failure
+ if($r === false) { // indicates schema is messed up or total db failure
$message = t('Unable to update your contact profile details on our system');
xml_status(3,$message);
}
// Otherwise everything seems to have worked and we are almost done. Yay!
// Send an email notification
+ logger('dfrn_confirm: request: info updated');
+
$r = q("SELECT * FROM `contact` LEFT JOIN `user` ON `contact`.`uid` = `user`.`uid`
WHERE `contact`.`id` = %d LIMIT 1",
intval($dfrn_record)
);
$res = mail($r[0]['email'], t("Connection accepted at ") . $a->config['sitename'],
- $email_tpl, 'From: ' . t('Administrator') . '@' . $_SERVER[SERVER_NAME] );
+ $email_tpl, 'From: ' . t('Administrator') . '@' . $_SERVER['SERVER_NAME'] );
if(!$res) {
// pointless throwing an error here and confusing the person at the other end of the wire.
}
projects / friendica.git / blobdiff