-// // FGAIAircraft - FGAIBase-derived class creates an AI airplane
+// FGAIAircraft - FGAIBase-derived class creates an AI airplane
//
// Written by David Culp, started October 2003.
//
# include <config.h>
#endif
-#include <simgear/route/waypoint.hxx>
#include <Main/fg_props.hxx>
#include <Main/globals.hxx>
-#include <Main/viewer.hxx>
#include <Scenery/scenery.hxx>
#include <Scenery/tilemgr.hxx>
#include <Airports/dynamics.hxx>
-#include <Airports/simple.hxx>
+#include <Airports/airport.hxx>
+#include <Main/util.hxx>
+
+#include <simgear/structure/exception.hxx>
#include <string>
-#include <math.h>
-#include <time.h>
-
-#ifdef _MSC_VER
-# include <float.h>
-# define finite _finite
-#elif defined(__sun) || defined(sgi)
-# include <ieeefp.h>
-#endif
+#include <cmath>
+#include <ctime>
-using std::string;
+// defined in AIShip.cxx
+extern double fgIsFinite(double x);
#include "AIAircraft.hxx"
#include "performancedata.hxx"
#include "performancedb.hxx"
+#include <signal.h>
-//#include <Airports/trafficcontroller.hxx>
+using std::string;
+using std::cerr;
+using std::endl;
-static string tempReg;
+//#include <Airports/trafficcontroller.hxx>
FGAIAircraft::FGAIAircraft(FGAISchedule *ref) :
/* HOT must be disabled for AI Aircraft,
headingError = 0;
minBearing = 360;
speedFraction =1.0;
+ prev_dist_to_go = 0.0;
holdPos = false;
needsTaxiClearance = false;
_performance = 0; //TODO initialize to JET_TRANSPORT from PerformanceDB
dt = 0;
- scheduledForTakeoff = false;
+ takeOffStatus = 0;
+
+ trackCache.remainingLength = 0;
+ trackCache.startWptName = "-";
}
FGAIBase::readFromScenario(scFileNode);
- setPerformance(scFileNode->getStringValue("class", "jet_transport"));
+ setPerformance("", scFileNode->getStringValue("class", "jet_transport"));
setFlightPlan(scFileNode->getStringValue("flightplan"),
scFileNode->getBoolValue("repeat", false));
setCallSign(scFileNode->getStringValue("callsign"));
void FGAIAircraft::bind() {
FGAIBase::bind();
- props->tie("controls/gear/gear-down",
- SGRawValueMethods<FGAIAircraft,bool>(*this,
- &FGAIAircraft::_getGearDown));
- props->tie("transponder-id",
- SGRawValueMethods<FGAIAircraft,const char*>(*this,
- &FGAIAircraft::_getTransponderCode));
+ tie("transponder-id",
+ SGRawValueMethods<FGAIAircraft,const char*>(*this,
+ &FGAIAircraft::_getTransponderCode));
}
-
-void FGAIAircraft::unbind() {
- FGAIBase::unbind();
-
- props->untie("controls/gear/gear-down");
- props->untie("transponder-id");
-}
-
-
void FGAIAircraft::update(double dt) {
FGAIBase::update(dt);
Run(dt);
Transform();
}
-void FGAIAircraft::setPerformance(const std::string& acclass) {
- static PerformanceDB perfdb; //TODO make it a global service
- setPerformance(perfdb.getDataFor(acclass));
- }
-
+void FGAIAircraft::setPerformance(const std::string& acType, const std::string& acclass)
+{
+ static PerformanceDB perfdb; //TODO make it a global service
+ _performance = perfdb.getDataFor(acType, acclass);
+}
+#if 0
void FGAIAircraft::setPerformance(PerformanceData *ps) {
_performance = ps;
}
-
+#endif
void FGAIAircraft::Run(double dt) {
FGAIAircraft::dt = dt;
handleATCRequests(); // ATC also has a word to say
updateSecondaryTargetValues(); // target roll, vertical speed, pitch
- updateActualState();
- // We currently have one situation in which an AIAircraft object is used that is not attached to the
+ updateActualState();
+#if 0
+ // 25/11/12 - added but disabled, since setting properties isn't
+ // affecting the AI-model as expected.
+ updateModelProperties(dt);
+#endif
+
+ // We currently have one situation in which an AIAircraft object is used that is not attached to the
// AI manager. In this particular case, the AIAircraft is used to shadow the user's aircraft's behavior in the AI world.
// Since we perhaps don't want a radar entry of our own aircraft, the following conditional should probably be adequate
// enough
- if (manager)
+ if (manager){
UpdateRadar(manager);
- checkVisibility();
+ invisible = !manager->isVisible(pos);
+ }
}
-void FGAIAircraft::checkVisibility()
-{
- double visibility_meters = fgGetDouble("/environment/visibility-m");
- FGViewer* vw = globals->get_current_view();
- invisible = (SGGeodesy::distanceM(vw->getPosition(), pos) > visibility_meters);
-}
-
-
void FGAIAircraft::AccelTo(double speed) {
tgt_speed = speed;
+ //assertSpeed(speed);
if (!isStationary())
_needsGroundElevation = true;
}
}
-void FGAIAircraft::setFlightPlan(const std::string& flightplan, bool repeat) {
- if (!flightplan.empty()) {
- FGAIFlightPlan* fp = new FGAIFlightPlan(flightplan);
+void FGAIAircraft::setFlightPlan(const std::string& flightplan, bool repeat)
+{
+ if (flightplan.empty()) {
+ // this is the case for Nasal-scripted aircraft
+ return;
+ }
+
+ FGAIFlightPlan* fp = new FGAIFlightPlan(flightplan);
+ if (fp->isValidPlan()) {
fp->setRepeat(repeat);
SetFlightPlan(fp);
+ } else {
+ SG_LOG(SG_AI, SG_WARN, "setFlightPlan: invalid flightplan specified:" << flightplan);
+ delete fp;
}
}
-void FGAIAircraft::SetFlightPlan(FGAIFlightPlan *f) {
+void FGAIAircraft::SetFlightPlan(FGAIFlightPlan *f)
+{
delete fp;
fp = f;
}
curr = fp->getCurrentWaypoint();
next = fp->getNextWaypoint();
}
+ if (!curr)
+ {
+ // Oops! FIXME
+ return;
+ }
+
if (! leadPointReached(curr)) {
controlHeading(curr);
controlSpeed(curr, next);
+
/*
if (speed < 0) {
cerr << getCallSign()
fp->setLeadDistance(tgt_speed, tgt_heading, curr, next);
}
+
if (!(prev->getOn_ground())) // only update the tgt altitude from flightplan if not on the ground
{
tgt_altitude_ft = prev->getAltitude();
if (curr->getCrossat() > -1000.0) {
use_perf_vs = false;
- tgt_vs = (curr->getCrossat() - altitude_ft) / (fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr)
- / 6076.0 / speed*60.0);
+ // Distance to go in meters
+ double vert_dist_ft = curr->getCrossat() - altitude_ft;
+ double err_dist = prev->getCrossat() - altitude_ft;
+ double dist_m = fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr);
+ tgt_vs = calcVerticalSpeed(vert_dist_ft, dist_m, speed, err_dist);
+
checkTcas();
tgt_altitude_ft = curr->getCrossat();
} else {
}
}
+double FGAIAircraft::calcVerticalSpeed(double vert_ft, double dist_m, double speed, double err)
+{
+ // err is negative when we passed too high
+ double vert_m = vert_ft * SG_FEET_TO_METER;
+ //double err_m = err * SG_FEET_TO_METER;
+ //double angle = atan2(vert_m, dist_m);
+ double speedMs = (speed * SG_NM_TO_METER) / 3600;
+ //double vs = cos(angle) * speedMs; // Now in m/s
+ double vs = 0;
+ //cerr << "Error term = " << err_m << endl;
+ if (dist_m) {
+ vs = ((vert_m) / dist_m) * speedMs;
+ }
+ // Convert to feet per minute
+ vs *= (SG_METER_TO_FEET * 60);
+ //if (getCallSign() == "LUFTHANSA2002")
+ //if (fabs(vs) > 100000) {
+// if (getCallSign() == "LUFTHANSA2057") {
+// cerr << getCallSign() << " " << fp->getPreviousWaypoint()->getName() << ". Alt = " << altitude_ft << " vertical dist = " << vert_m << " horiz dist = " << dist_m << " << angle = " << angle * SG_RADIANS_TO_DEGREES << " vs " << vs << " horizontal speed " << speed << "Previous crossAT " << fp->getPreviousWaypoint()->getCrossat() << endl;
+// //= (curr->getCrossat() - altitude_ft) / (fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr)
+// // / 6076.0 / speed*60.0);
+// //raise(SIGSEGV);
+// }
+ return vs;
+}
+
+void FGAIAircraft::assertSpeed(double speed)
+{
+ if ((speed < -50) || (speed > 1000)) {
+ cerr << getCallSign() << " "
+ << "Previous waypoint " << fp->getPreviousWaypoint()->getName() << " "
+ << "Departure airport " << trafficRef->getDepartureAirport() << " "
+ << "Leg " << fp->getLeg() << " "
+ << "target_speed << " << tgt_speed << " "
+ << "speedFraction << " << speedFraction << " "
+ << "Currecnt speed << " << speed << " "
+ << endl;
+ //raise(SIGSEGV);
+ }
+}
+
+
+
void FGAIAircraft::checkTcas(void)
{
if (props->getIntValue("tcas/threat-level",0)==3)
void FGAIAircraft::initializeFlightPlan() {
}
-
-bool FGAIAircraft::_getGearDown() const {
- return _performance->gearExtensible(this);
-}
-
-
const char * FGAIAircraft::_getTransponderCode() const {
return transponderCode.c_str();
}
// Only do the proper hitlist stuff if we are within visible range of the viewer.
if (!invisible) {
- double visibility_meters = fgGetDouble("/environment/visibility-m");
- FGViewer* vw = globals->get_current_view();
-
- if (SGGeodesy::distanceM(vw->getPosition(), pos) > visibility_meters) {
+ double visibility_meters = fgGetDouble("/environment/visibility-m");
+ if (SGGeodesy::distanceM(globals->get_view_position(), pos) > visibility_meters) {
return;
}
void FGAIAircraft::doGroundAltitude() {
- if ((fabs(altitude_ft - (tgt_altitude_ft+groundOffset)) > 1000.0)||
- (isStationary()))
- altitude_ft = (tgt_altitude_ft + groundOffset);
- else
- altitude_ft += 0.1 * ((tgt_altitude_ft+groundOffset) - altitude_ft);
- tgt_vs = 0;
+ if ((fp->getLeg() == 7) && ((altitude_ft - tgt_altitude_ft) > 5)) {
+ tgt_vs = -500;
+ } else {
+ if ((fabs(altitude_ft - (tgt_altitude_ft+groundOffset)) > 1000.0)||
+ (isStationary()))
+ altitude_ft = (tgt_altitude_ft + groundOffset);
+ else
+ altitude_ft += 0.1 * ((tgt_altitude_ft+groundOffset) - altitude_ft);
+ tgt_vs = 0;
+ }
}
void FGAIAircraft::announcePositionToController() {
- if (trafficRef) {
- int leg = fp->getLeg();
-
- // Note that leg has been incremented after creating the current leg, so we should use
- // leg numbers here that are one higher than the number that is used to create the leg
- // NOTE: As of July, 30, 2011, the post-creation leg updating is no longer happening.
- // Leg numbers are updated only once the aircraft passes the last waypoint created for that legm so I should probably just use
- // the original leg numbers here!
- switch (leg) {
- case 1: // Startup and Push back
- if (trafficRef->getDepartureAirport()->getDynamics())
- controller = trafficRef->getDepartureAirport()->getDynamics()->getStartupController();
- break;
- case 2: // Taxiing to runway
- if (trafficRef->getDepartureAirport()->getDynamics()->getGroundNetwork()->exists())
- controller = trafficRef->getDepartureAirport()->getDynamics()->getGroundNetwork();
- break;
- case 3: //Take off tower controller
- if (trafficRef->getDepartureAirport()->getDynamics()) {
- controller = trafficRef->getDepartureAirport()->getDynamics()->getTowerController();
- } else {
- cerr << "Error: Could not find Dynamics at airport : " << trafficRef->getDepartureAirport()->getId() << endl;
- }
- break;
- case 6:
- if (trafficRef->getDepartureAirport()->getDynamics()) {
- controller = trafficRef->getArrivalAirport()->getDynamics()->getApproachController();
- }
- break;
- case 8: // Taxiing for parking
- if (trafficRef->getArrivalAirport()->getDynamics()->getGroundNetwork()->exists())
- controller = trafficRef->getArrivalAirport()->getDynamics()->getGroundNetwork();
- break;
- default:
- controller = 0;
- break;
+ if (!trafficRef) {
+ return;
+ }
+
+ int leg = fp->getLeg();
+ if (!fp->getCurrentWaypoint()) {
+ // http://code.google.com/p/flightgear-bugs/issues/detail?id=1153
+ // throw an exception so this aircraft gets killed by the AIManager.
+ throw sg_exception("bad AI flight plan");
+ }
+
+ // Note that leg has been incremented after creating the current leg, so we should use
+ // leg numbers here that are one higher than the number that is used to create the leg
+ // NOTE: As of July, 30, 2011, the post-creation leg updating is no longer happening.
+ // Leg numbers are updated only once the aircraft passes the last waypoint created for that legm so I should probably just use
+ // the original leg numbers here!
+ switch (leg) {
+ case 1: // Startup and Push back
+ if (trafficRef->getDepartureAirport()->getDynamics())
+ controller = trafficRef->getDepartureAirport()->getDynamics()->getStartupController();
+ break;
+ case 2: // Taxiing to runway
+ if (trafficRef->getDepartureAirport()->getDynamics()->getGroundNetwork()->exists())
+ controller = trafficRef->getDepartureAirport()->getDynamics()->getGroundNetwork();
+ break;
+ case 3: //Take off tower controller
+ if (trafficRef->getDepartureAirport()->getDynamics()) {
+ controller = trafficRef->getDepartureAirport()->getDynamics()->getTowerController();
+ towerController = 0;
+ } else {
+ cerr << "Error: Could not find Dynamics at airport : " << trafficRef->getDepartureAirport()->getId() << endl;
}
+ break;
+ case 6:
+ if (trafficRef->getDepartureAirport()->getDynamics()) {
+ controller = trafficRef->getArrivalAirport()->getDynamics()->getApproachController();
+ }
+ break;
+ case 8: // Taxiing for parking
+ if (trafficRef->getArrivalAirport()->getDynamics()->getGroundNetwork()->exists())
+ controller = trafficRef->getArrivalAirport()->getDynamics()->getGroundNetwork();
+ break;
+ default:
+ controller = 0;
+ break;
+ }
- if ((controller != prevController) && (prevController != 0)) {
- prevController->signOff(getID());
- }
- prevController = controller;
- if (controller) {
- controller->announcePosition(getID(), fp, fp->getCurrentWaypoint()->getRouteIndex(),
- _getLatitude(), _getLongitude(), hdg, speed, altitude_ft,
- trafficRef->getRadius(), leg, this);
- }
+ if ((controller != prevController) && (prevController != 0)) {
+ prevController->signOff(getID());
+ }
+ prevController = controller;
+ if (controller) {
+ controller->announcePosition(getID(), fp, fp->getCurrentWaypoint()->getRouteIndex(),
+ _getLatitude(), _getLongitude(), hdg, speed, altitude_ft,
+ trafficRef->getRadius(), leg, this);
}
}
-void FGAIAircraft::scheduleForATCTowerDepartureControl() {
- if (!scheduledForTakeoff) {
+void FGAIAircraft::scheduleForATCTowerDepartureControl(int state) {
+ if (!takeOffStatus) {
int leg = fp->getLeg();
if (trafficRef) {
if (trafficRef->getDepartureAirport()->getDynamics()) {
towerController->announcePosition(getID(), fp, fp->getCurrentWaypoint()->getRouteIndex(),
_getLatitude(), _getLongitude(), hdg, speed, altitude_ft,
trafficRef->getRadius(), leg, this);
+ //cerr << "Scheduling " << trafficRef->getCallSign() << " for takeoff " << endl;
}
}
}
- scheduledForTakeoff = true;
+ takeOffStatus = state;
}
// Process ATC instructions and report back
-void FGAIAircraft::processATC(FGATCInstruction instruction) {
+void FGAIAircraft::processATC(const FGATCInstruction& instruction) {
if (instruction.getCheckForCircularWait()) {
// This is not exactly an elegant solution,
// but at least it gives me a chance to check
FGAIWaypoint* next = 0;// the next plus 1
spinCounter = 0;
- tempReg = "";
//TODO fp should handle this
fp->IncrementWaypoint(eraseWaypoints);
setAltitude(prev->getAltitude());
if (prev->getSpeed() > 0.0)
- setHeading(fp->getBearing(prev->getLatitude(), prev->getLongitude(), curr));
+ setHeading(fp->getBearing(prev, curr));
else
- setHeading(fp->getBearing(curr->getLatitude(), curr->getLongitude(), prev));
+ setHeading(fp->getBearing(curr, prev));
// If next doesn't exist, as in incrementally created flightplans for
// AI/Trafficmanager created plans,
if (curr->getCrossat() > -1000.0) //use a calculated descent/climb rate
{
use_perf_vs = false;
- tgt_vs = (curr->getCrossat() - prev->getAltitude())
- / (fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr)
- / 6076.0 / prev->getSpeed()*60.0);
+ //tgt_vs = (curr->getCrossat() - prev->getAltitude())
+ // / (fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr)
+ // / 6076.0 / prev->getSpeed()*60.0);
+ double vert_dist_ft = curr->getCrossat() - altitude_ft;
+ double err_dist = prev->getCrossat() - altitude_ft;
+ double dist_m = fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr);
+ tgt_vs = calcVerticalSpeed(vert_dist_ft, dist_m, speed, err_dist);
checkTcas();
tgt_altitude_ft = curr->getCrossat();
} else {
if (tgt_speed > -0.5) {
tgt_speed = -0.5;
}
+ //assertSpeed(tgt_speed);
if (fp->getPreviousWaypoint()->getSpeed() < tgt_speed) {
fp->getPreviousWaypoint()->setSpeed(tgt_speed);
}
// << lead_dist << " " << curr->name
// << " Ground target speed " << groundTargetSpeed << endl;
double bearing = 0;
- if (speed > 50) { // don't do bearing calculations for ground traffic
- bearing = getBearing(fp->getBearing(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr));
+ // don't do bearing calculations for ground traffic
+ bearing = getBearing(fp->getBearing(pos, curr));
if (bearing < minBearing) {
minBearing = bearing;
if (minBearing < 10) {
minBearing = 10;
}
if ((minBearing < 360.0) && (minBearing > 10.0)) {
- speedFraction = cos(minBearing *SG_DEGREES_TO_RADIANS);
+ speedFraction = 0.5 + (cos(minBearing *SG_DEGREES_TO_RADIANS) * 0.5);
} else {
speedFraction = 1.0;
}
- }
- }
+ }
if (trafficRef) {
//cerr << "Tracking callsign : \"" << fgGetString("/ai/track-callsign") << "\"" << endl;
-/* if (trafficRef->getCallSign() == fgGetString("/ai/track-callsign")) {
- cerr << trafficRef->getCallSign() << " " << tgt_altitude_ft << " " << _getSpeed() << " "
- << _getAltitude() << " "<< _getLatitude() << " " << _getLongitude() << " " << dist_to_go << " " << lead_dist << " " << curr->name << " " << vs << " " << tgt_vs << " " << bearing << " " << minBearing << " " << speedFraction << endl;
- }*/
+ //if (trafficRef->getCallSign() == fgGetString("/ai/track-callsign")) {
+ //cerr << trafficRef->getCallSign() << " " << tgt_altitude_ft << " " << _getSpeed() << " "
+ // << _getAltitude() << " "<< _getLatitude() << " " << _getLongitude() << " " << dist_to_go << " " << lead_dist << " " << curr->getName() << " " << vs << " " << //tgt_vs << " " << bearing << " " << minBearing << " " << speedFraction << endl;
+ //}
}
- if ((dist_to_go < lead_dist) || (bearing > (minBearing * 1.1))) {
+ if ((dist_to_go < lead_dist) ||
+ ((dist_to_go > prev_dist_to_go) && (bearing > (minBearing * 1.1))) ) {
minBearing = 360;
+ speedFraction = 1.0;
+ prev_dist_to_go = HUGE_VAL;
return true;
} else {
+ prev_dist_to_go = dist_to_go;
return false;
}
}
-bool FGAIAircraft::aiTrafficVisible() {
- SGGeod userPos(SGGeod::fromDeg(fgGetDouble("/position/longitude-deg"),
- fgGetDouble("/position/latitude-deg")));
-
- return (SGGeodesy::distanceNm(userPos, pos) <= TRAFFICTOAIDISTTODIE);
+bool FGAIAircraft::aiTrafficVisible()
+{
+ SGVec3d cartPos = SGVec3d::fromGeod(pos);
+ const double d2 = (TRAFFICTOAIDISTTODIE * SG_NM_TO_METER) *
+ (TRAFFICTOAIDISTTODIE * SG_NM_TO_METER);
+ return (distSqr(cartPos, globals->get_aircraft_position_cart()) < d2);
}
// This waypoint marks the fact that the aircraft has passed the initial taxi
// departure waypoint, so it can release the parking.
//cerr << trafficRef->getCallSign() << " has passed waypoint " << prev->name << " at speed " << speed << endl;
+ //cerr << "Passing waypoint : " << prev->getName() << endl;
if (prev->contains("PushBackPoint")) {
- dep->getDynamics()->releaseParking(fp->getGate());
+ // clearing the parking assignment will release the gate
+ fp->setGate(ParkingAssignment());
AccelTo(0.0);
- setTaxiClearanceRequest(true);
+ //setTaxiClearanceRequest(true);
}
if (prev->contains("legend")) {
fp->incrementLeg();
}
if (prev->contains(string("DepartureHold"))) {
- scheduleForATCTowerDepartureControl();
+ //cerr << "Passing point DepartureHold" << endl;
+ scheduleForATCTowerDepartureControl(1);
}
-
+ if (prev->contains(string("Accel"))) {
+ takeOffStatus = 3;
+ }
+ //if (prev->contains(string("landing"))) {
+ // if (speed < _performance->vTaxi() * 2) {
+ // fp->shortenToFirst(2, "legend");
+ // }
+ //}
+ //if (prev->contains(string("final"))) {
+ //
+ // cerr << getCallSign() << " "
+ // << fp->getPreviousWaypoint()->getName()
+ // << ". Alt = " << altitude_ft
+ // << " vs " << vs
+ // << " horizontal speed " << speed
+ // << "Previous crossAT " << fp->getPreviousWaypoint()->getCrossat()
+ // << "Airport elevation" << getTrafficRef()->getArrivalAirport()->getElevation()
+ // << "Altitude difference " << (altitude_ft - fp->getPreviousWaypoint()->getCrossat()) << endl;
+ //q}
// This is the last taxi waypoint, and marks the the end of the flight plan
// so, the schedule should update and wait for the next departure time.
if (prev->contains("END")) {
if (nextDeparture < (now+1200)) {
nextDeparture = now + 1200;
}
- fp->setTime(nextDeparture); // should be "next departure"
+ fp->setTime(nextDeparture);
}
return true;
* @param curr
*/
void FGAIAircraft::controlHeading(FGAIWaypoint* curr) {
- double calc_bearing = fp->getBearing(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr);
+ double calc_bearing = fp->getBearing(pos, curr);
//cerr << "Bearing = " << calc_bearing << endl;
if (speed < 0) {
calc_bearing +=180;
- if (calc_bearing > 360)
- calc_bearing -= 360;
+ SG_NORMALIZE_RANGE(calc_bearing, 0.0, 360.0);
}
- if (finite(calc_bearing)) {
+ if (fgIsFinite(calc_bearing)) {
double hdg_error = calc_bearing - tgt_heading;
if (fabs(hdg_error) > 0.01) {
TurnTo( calc_bearing );
cerr << "calc_bearing is not a finite number : "
<< "Speed " << speed
<< "pos : " << pos.getLatitudeDeg() << ", " << pos.getLongitudeDeg()
- << "waypoint " << curr->getLatitude() << ", " << curr->getLongitude() << endl;
- cerr << "waypoint name " << curr->getName();
- exit(1); // FIXME
+ << ", waypoint: " << curr->getLatitude() << ", " << curr->getLongitude() << endl;
+ cerr << "waypoint name: '" << curr->getName() << "'" << endl;
+ //exit(1); // FIXME
}
}
if (fabs(speed_diff) > 10) {
prevSpeed = speed;
+ //assertSpeed(speed);
if (next) {
fp->setLeadDistance(speed, tgt_heading, curr, next);
}
// from control properties. These default to the initial
// settings in the config file, but can be changed "on the
// fly".
- string lat_mode = props->getStringValue("controls/flight/lateral-mode");
+ const string& lat_mode = props->getStringValue("controls/flight/lateral-mode");
if ( lat_mode == "roll" ) {
double angle
= props->getDoubleValue("controls/flight/target-roll" );
}
}
-void FGAIAircraft::updatePosition() {
- // convert speed to degrees per second
- double speed_north_deg_sec = cos( hdg * SGD_DEGREES_TO_RADIANS )
- * speed * 1.686 / ft_per_deg_lat;
- double speed_east_deg_sec = sin( hdg * SGD_DEGREES_TO_RADIANS )
- * speed * 1.686 / ft_per_deg_lon;
-
- // set new position
- pos.setLatitudeDeg( pos.getLatitudeDeg() + speed_north_deg_sec * dt);
- pos.setLongitudeDeg( pos.getLongitudeDeg() + speed_east_deg_sec * dt);
-}
-
-
void FGAIAircraft::updateHeading() {
// adjust heading based on current bank angle
if (roll == 0.0)
// If on ground, calculate heading change directly
if (onGround()) {
double headingDiff = fabs(hdg-tgt_heading);
- double bank_sense = 0.0;
+// double bank_sense = 0.0;
/*
double diff = fabs(hdg - tgt_heading);
if (diff > 180)
if (sum > 360.0)
sum -= 360.0;
if (fabs(sum - tgt_heading) > 0.0001) {
- bank_sense = -1.0;
+// bank_sense = -1.0;
} else {
- bank_sense = 1.0;
+// bank_sense = 1.0;
}
//if (trafficRef)
// cerr << trafficRef->getCallSign() << " Heading "
// << hdg << ". Target " << tgt_heading << ". Diff " << fabs(sum - tgt_heading) << ". Speed " << speed << endl;
//if (headingDiff > 60) {
groundTargetSpeed = tgt_speed; // * cos(headingDiff * SG_DEGREES_TO_RADIANS);
+ //assertSpeed(groundTargetSpeed);
//groundTargetSpeed = tgt_speed - tgt_speed * (headingDiff/180);
//} else {
// groundTargetSpeed = tgt_speed;
//}
if (sign(groundTargetSpeed) != sign(tgt_speed))
groundTargetSpeed = 0.21 * sign(tgt_speed); // to prevent speed getting stuck in 'negative' mode
-
+ //assertSpeed(groundTargetSpeed);
// Only update the target values when we're not moving because otherwise we might introduce an enormous target change rate while waiting a the gate, or holding.
if (speed != 0) {
if (headingDiff > 30.0) {
}
}
}
- if (trafficRef)
- //cerr << trafficRef->getCallSign() << " Heading "
- // << hdg << ". Target " << tgt_heading << ". Diff " << fabs(sum - tgt_heading) << ". Speed " << speed << "Heading change rate : " << headingChangeRate << " bacnk sence " << bank_sense << endl;
- hdg += headingChangeRate * dt * sqrt(fabs(speed) / 15);
+
+ hdg += headingChangeRate * dt * sqrt(fabs(speed) / 15);
headingError = headingDiff;
+ if (fabs(headingError) < 1.0) {
+ hdg = tgt_heading;
+ }
} else {
if (fabs(speed) > 1.0) {
turn_radius_ft = 0.088362 * speed * speed
// find target vertical speed
if (use_perf_vs) {
if (altitude_ft < tgt_altitude_ft) {
- tgt_vs = tgt_altitude_ft - altitude_ft;
- if (tgt_vs > _performance->climbRate())
- tgt_vs = _performance->climbRate();
+ tgt_vs = std::min(tgt_altitude_ft - altitude_ft, _performance->climbRate());
} else {
- tgt_vs = tgt_altitude_ft - altitude_ft;
- if (tgt_vs < (-_performance->descentRate()))
- tgt_vs = -_performance->descentRate();
+ tgt_vs = std::max(tgt_altitude_ft - altitude_ft, -_performance->descentRate());
}
} else {
- double max_vs = 4*(tgt_altitude_ft - altitude_ft);
+ double vert_dist_ft = fp->getCurrentWaypoint()->getCrossat() - altitude_ft;
+ double err_dist = 0; //prev->getCrossat() - altitude_ft;
+ double dist_m = fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), fp->getCurrentWaypoint());
+ tgt_vs = calcVerticalSpeed(vert_dist_ft, dist_m, speed, err_dist);
+ //cerr << "Target vs before : " << tgt_vs;
+/* double max_vs = 10*(tgt_altitude_ft - altitude_ft);
double min_vs = 100;
if (tgt_altitude_ft < altitude_ft)
min_vs = -100.0;
tgt_vs = max_vs;
if (fabs(tgt_vs) < fabs(min_vs))
- tgt_vs = min_vs;
+ tgt_vs = min_vs;*/
+ //cerr << "target vs : after " << tgt_vs << endl;
}
} //else
// tgt_vs = 0.0;
}
}
-string FGAIAircraft::atGate() {
- string tmp("");
- if (fp->getLeg() < 3) {
- if (trafficRef) {
- if (fp->getGate() > 0) {
- FGParking *park =
- trafficRef->getDepartureAirport()->getDynamics()->getParking(fp->getGate());
- tmp = park->getName();
- }
- }
+const string& FGAIAircraft::atGate()
+{
+ if ((fp->getLeg() < 3) && trafficRef) {
+ if (fp->getParkingGate()) {
+ return fp->getParkingGate()->ident();
+ }
}
- return tmp;
+
+ static const string empty;
+ return empty;
}
void FGAIAircraft::handleATCRequests() {
altitude_ft, dt);
processATC(controller->getInstruction(getID()));
}
+ if (towerController) {
+ towerController->updateAircraftInformation(getID(),
+ pos.getLatitudeDeg(),
+ pos.getLongitudeDeg(),
+ hdg,
+ speed,
+ altitude_ft, dt);
+ }
}
void FGAIAircraft::updateActualState() {
//update current state
//TODO have a single tgt_speed and check speed limit on ground on setting tgt_speed
- updatePosition();
+ double distance = speed * SG_KT_TO_MPS * dt;
+ pos = SGGeodesy::direct(pos, hdg, distance);
+
if (onGround())
- speed = _performance->actualSpeed(this, groundTargetSpeed, dt);
+ speed = _performance->actualSpeed(this, groundTargetSpeed, dt, holdPos);
else
- speed = _performance->actualSpeed(this, (tgt_speed *speedFraction), dt);
-
+ speed = _performance->actualSpeed(this, (tgt_speed *speedFraction), dt, false);
+ //assertSpeed(speed);
updateHeading();
roll = _performance->actualBankAngle(this, tgt_roll, dt);
return hdgDiff;
}
-time_t FGAIAircraft::checkForArrivalTime(string wptName) {
+time_t FGAIAircraft::checkForArrivalTime(const string& wptName) {
FGAIWaypoint* curr = 0;
curr = fp->getCurrentWaypoint();
- double tracklength = fp->checkTrackLength(wptName);
+ // don't recalculate tracklength unless the start/stop waypoint has changed
+ if (curr &&
+ ((curr->getName() != trackCache.startWptName)||
+ (wptName != trackCache.finalWptName)))
+ {
+ trackCache.remainingLength = fp->checkTrackLength(wptName);
+ trackCache.startWptName = curr->getName();
+ trackCache.finalWptName = wptName;
+ }
+ double tracklength = trackCache.remainingLength;
if (tracklength > 0.1) {
tracklength += fp->getDistanceToGo(pos.getLatitudeDeg(), pos.getLongitudeDeg(), curr);
} else {
}
return (ete - secondsToGo); // Positive when we're too slow...
}
+
+double limitRateOfChange(double cur, double target, double maxDeltaSec, double dt)
+{
+ double delta = target - cur;
+ double maxDelta = maxDeltaSec * dt;
+
+// if delta is > maxDelta, use maxDelta, but with the sign of delta.
+ return (fabs(delta) < maxDelta) ? delta : copysign(maxDelta, delta);
+}
+
+// drive various properties in a semi-realistic fashion.
+void FGAIAircraft::updateModelProperties(double dt)
+{
+ if (!props) {
+ return;
+ }
+
+ SGPropertyNode* gear = props->getChild("gear", 0, true);
+ double targetGearPos = fp->getCurrentWaypoint()->getGear_down() ? 1.0 : 0.0;
+ if (!gear->hasValue("gear/position-norm")) {
+ gear->setDoubleValue("gear/position-norm", targetGearPos);
+ }
+
+ double gearPosNorm = gear->getDoubleValue("gear/position-norm");
+ if (gearPosNorm != targetGearPos) {
+ gearPosNorm += limitRateOfChange(gearPosNorm, targetGearPos, 0.1, dt);
+ if (gearPosNorm < 0.001) {
+ gearPosNorm = 0.0;
+ } else if (gearPosNorm > 0.999) {
+ gearPosNorm = 1.0;
+ }
+
+ for (int i=0; i<6; ++i) {
+ SGPropertyNode* g = gear->getChild("gear", i, true);
+ g->setDoubleValue("position-norm", gearPosNorm);
+ } // of gear setting loop
+ } // of gear in-transit
+
+// double flapPosNorm = props->getDoubleValue();
+}
+