* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
**************************************************************************/
-#include "AIFlightPlan.hxx"
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
#include <simgear/math/sg_geodesy.hxx>
+
+#include <Airports/simple.hxx>
#include <Airports/runways.hxx>
+#include <Airports/dynamics.hxx>
#include <Environment/environment_mgr.hxx>
#include <Environment/environment.hxx>
+#include "AIFlightPlan.hxx"
+#include "AIAircraft.hxx"
+#include "performancedata.hxx"
-void FGAIFlightPlan::createPushBack(bool firstFlight, FGAirport *dep,
+
+// TODO: Use James Turner's createOnGround functions.
+void FGAIFlightPlan::createPushBack(FGAIAircraft *ac,
+ bool firstFlight, FGAirport *dep,
double latitude,
double longitude,
double radius,
const string& airline)
{
double lat, lon, heading;
+ double vTaxi = ac->getPerformance()->vTaxi();
+ double vTaxiBackward = vTaxi * (-2.0/3.0);
+ double vTaxiReduced = vTaxi * (2.0/3.0);
FGTaxiRoute *pushBackRoute;
+ // Active runway can be conditionally set by ATC, so at the start of a new flight, this
+ // must be reset.
+ activeRunway.clear();
+
if (!(dep->getDynamics()->getGroundNetwork()->exists())) {
//cerr << "Push Back fallback" << endl;
- createPushBackFallBack(firstFlight, dep, latitude, longitude,
+ createPushBackFallBack(ac, firstFlight, dep, latitude, longitude,
radius, fltType, aircraftType, airline);
} else {
if (firstFlight) {
+
if (!(dep->getDynamics()->getAvailableParking(&lat, &lon,
&heading, &gateId,
radius, fltType,
// Elevation is currently disregarded when on_ground is true
// because the AIModel obtains a periodic ground elevation estimate.
wpt->altitude = dep->getElevation();
- wpt->speed = -10;
+ wpt->speed = vTaxiBackward;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
wpt->routeIndex = -1;
waypoints.push_back(wpt);
}
+ //cerr << "Success : GateId = " << gateId << endl;
+ SG_LOG(SG_INPUT, SG_WARN, "Warning: Succesfully found a parking for a " <<
+ aircraftType <<
+ " of flight type " << fltType <<
+ " of airline " << airline <<
+ " at airport " << dep->getId());
} else {
//cerr << "Push Back follow-up Flight" << endl;
dep->getDynamics()->getParking(gateId, &lat, &lon, &heading);
}
if (gateId < 0) {
- createPushBackFallBack(firstFlight, dep, latitude, longitude,
+ createPushBackFallBack(ac, firstFlight, dep, latitude, longitude,
radius, fltType, aircraftType, airline);
return;
FGParking *parking = dep->getDynamics()->getParking(gateId);
int pushBackNode = parking->getPushBackPoint();
- // initialize the pushback route. Note that parts
- // of this procedure should probably be done inside
- // taxidraw. This code is likely to change once this
- // this is fully implemented in taxidraw. Until that time,
- // however, the full initialization procedure looks like this:
- // 1) Build a list of all the nodes that are classified as
- // pushBack hold points
- // 2) For each hold point, use the dykstra algorithm to find a route
- // between the gate and the pushBack hold nodes, however use only
- // segments that are classified as "pushback" routes.
- // 3) return the TaxiRoute class that is non empty.
- // 4) store refer this route in the parking object, for future use
-
- if (pushBackNode < 0) {
- //cerr << "Initializing PushBackRoute " << endl;
- intVec pushBackNodes;
- int nAINodes = dep->getDynamics()->getGroundNetwork()->getNrOfNodes();
- int hits = 0;
- parking->setPushBackPoint(0); // default in case no network was found.
- // Collect all the nodes that are classified as having pushBack hold status
- for (int i = 0; i < nAINodes; i++) {
- if (dep->getDynamics()->getGroundNetwork()->findNode(i)->getHoldPointType() == 3) {
- pushBackNodes.push_back(i);
- }
- }
-
- // For each node found in step 1, check if it can be reached
- FGTaxiRoute route;
- for (intVecIterator nodes = pushBackNodes.begin();
- nodes != pushBackNodes.end();
- nodes++) {
- route = dep->getDynamics()->getGroundNetwork()->findShortestRoute(gateId, *nodes, false);
- if (!(route.empty())) {
- //cerr << "Found Pushback route of size " << route.size() << endl;
- hits++;
- parking->setPushBackRoute(new FGTaxiRoute(route));
- parking->setPushBackPoint(*nodes);
- pushBackNode = *nodes;
- }
- }
- if (hits == 0) {
- SG_LOG(SG_GENERAL, SG_INFO, "No pushback route found for gate " << gateId << " at " << dep->getId());
- }
- if (hits > 1) {
- SG_LOG(SG_GENERAL, SG_WARN, hits << " pushback routes found for gate " << gateId << " at " << dep->getId());
- }
- }
- if (pushBackNode > 0) {
+ pushBackRoute = parking->getPushBackRoute();
+ if ((pushBackNode > 0) && (pushBackRoute == 0)) {
int node, rte;
- //cerr << "Found valid pusback node " << pushBackNode << "for gate " << gateId << endl;
+ FGTaxiRoute route;
+ //cerr << "Creating push-back for " << gateId << " (" << parking->getName() << ") using push-back point " << pushBackNode << endl;
+ route = dep->getDynamics()->getGroundNetwork()->findShortestRoute(gateId, pushBackNode, false);
+ parking->setPushBackRoute(new FGTaxiRoute(route));
+
+
pushBackRoute = parking->getPushBackRoute();
int size = pushBackRoute->size();
if (size < 2) {
SG_LOG(SG_GENERAL, SG_WARN, "Push back route from gate " << gateId << " has only " << size << " nodes.");
+ SG_LOG(SG_GENERAL, SG_WARN, "Using " << pushBackNode);
}
pushBackRoute->first();
waypoint *wpt;
// Elevation is currently disregarded when on_ground is true
// because the AIModel obtains a periodic ground elevation estimate.
wpt->altitude = dep->getElevation();
- wpt->speed = -10;
+ wpt->speed = vTaxiBackward;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
}
// some special considerations for the last point:
wpt->name = string("PushBackPoint");
- wpt->speed = 15;
+ wpt->speed = vTaxi;
+ //for (wpt_vector_iterator i = waypoints.begin(); i != waypoints.end(); i++) {
+ // cerr << "Waypoint Name: " << (*i)->name << endl;
+ //}
} else {
//cerr << "Creating direct forward departure route fragment" << endl;
- double lat2, lon2, az2;
+ double lat2 = 0.0, lon2 = 0.0, az2 = 0.0;
waypoint *wpt;
geo_direct_wgs_84 ( 0, lat, lon, heading,
2, &lat2, &lon2, &az2 );
wpt->latitude = lat2;
wpt->longitude = lon2;
wpt->altitude = dep->getElevation();
- wpt->speed = 10;
+ wpt->speed = vTaxiReduced;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
wpt->latitude = lat2;
wpt->longitude = lon2;
wpt->altitude = dep->getElevation();
- wpt->speed = 10;
+ wpt->speed = vTaxiReduced;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
wpt->latitude = tn->getLatitude();
wpt->longitude = tn->getLongitude();
wpt->altitude = dep->getElevation();
- wpt->speed = 10;
+ wpt->speed = vTaxiReduced;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
* This is the backup function for airports that don't have a
* network yet.
******************************************************************/
-void FGAIFlightPlan::createPushBackFallBack(bool firstFlight, FGAirport *dep,
+void FGAIFlightPlan::createPushBackFallBack(FGAIAircraft *ac, bool firstFlight, FGAirport *dep,
double latitude,
double longitude,
double radius,
double heading;
double lat;
double lon;
- double lat2;
- double lon2;
- double az2;
+ double lat2 = 0.0;
+ double lon2 = 0.0;
+ double az2 = 0.0;
+
+ double vTaxi = ac->getPerformance()->vTaxi();
+ double vTaxiBackward = vTaxi * (-2.0/3.0);
+ double vTaxiReduced = vTaxi * (2.0/3.0);
wpt->latitude = lat;
wpt->longitude = lon;
wpt->altitude = dep->getElevation();
- wpt->speed = -10;
+ wpt->speed = vTaxiBackward;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
wpt->latitude = lat2;
wpt->longitude = lon2;
wpt->altitude = dep->getElevation();
- wpt->speed = -10;
+ wpt->speed = vTaxiBackward;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;
wpt->latitude = lat2;
wpt->longitude = lon2;
wpt->altitude = dep->getElevation();
- wpt->speed = 10;
+ wpt->speed = vTaxiReduced;
wpt->crossat = -10000;
wpt->gear_down = true;
wpt->flaps_down= true;