#include <simgear/misc/sg_path.hxx>
#include <simgear/debug/logstream.hxx>
+#include <Airports/simple.hxx>
#include "ATCmgr.hxx"
-#include "atislist.hxx"
-//#include "groundlist.hxx"
-#include "towerlist.hxx"
-#include "approachlist.hxx"
+#include "commlist.hxx"
#include "ATCdisplay.hxx"
+#include "ATCDialog.hxx"
+#include "ATCutils.hxx"
/*
// periodic radio station search wrapper
}
*/ //This wouldn't compile - including Time/event.hxx breaks it :-(
+AirportATC::AirportATC() :
+ lon(0.0),
+ lat(0.0),
+ elev(0.0),
+ atis_freq(0.0),
+ atis_active(false),
+ tower_freq(0.0),
+ tower_active(false),
+ ground_freq(0.0),
+ ground_active(false),
+ set_by_AI(false),
+ numAI(0)
+{
+ set_by_comm[0] = false;
+ set_by_comm[1] = false;
+}
+
FGATCMgr::FGATCMgr() {
- comm1_ident = "";
- comm1_atis_ident = "";
- comm1_tower_ident = "";
- comm1_approach_ident = "";
- last_comm1_ident = "";
- last_comm1_atis_ident = "";
- last_comm1_tower_ident = "";
- last_comm1_approach_ident = "";
+ comm_ident[0] = "";
+ comm_ident[1] = "";
+ last_comm_ident[0] = "";
+ last_comm_ident[1] = "";
approach_ident = "";
last_in_range = false;
- comm1_atis_valid = false;
- comm1_tower_valid = false;
- comm1_approach_valid = false;
+ comm_type[0] = INVALID;
+ comm_type[1] = INVALID;
+ comm_atc_ptr[0] = NULL;
+ comm_atc_ptr[1] = NULL;
}
FGATCMgr::~FGATCMgr() {
+ delete v1;
}
void FGATCMgr::bind() {
}
void FGATCMgr::init() {
- comm1_node = fgGetNode("/radios/comm[0]/frequencies/selected-mhz", true);
- comm2_node = fgGetNode("/radios/comm[1]/frequencies/selected-mhz", true);
+ comm_node[0] = fgGetNode("/radios/comm[0]/frequencies/selected-mhz", true);
+ comm_node[1] = fgGetNode("/radios/comm[1]/frequencies/selected-mhz", true);
lon_node = fgGetNode("/position/longitude-deg", true);
lat_node = fgGetNode("/position/latitude-deg", true);
elev_node = fgGetNode("/position/altitude-ft", true);
atc_list_itr = atc_list.begin();
+
// Search for connected ATC stations once per 0.8 seconds or so
// global_events.Register( "fgATCSearch()", fgATCSearch,
// fgEVENT::FG_EVENT_READY, 800);
// For some reason the above doesn't compile - including Time/event.hxx stops compilation.
- // Initialise the airport_atc_map - we'll cheat for now and just hardcode KEMT and any others that may be needed for development
- AirportATC *a = new AirportATC;
- a->lon = -118.034719;
- a->lat = 34.086114;
- a->elev = 296.0;
- a->atis_freq = 118.75;
- a->atis_active = false;
- a->tower_freq = 121.2;
- a->tower_active = false;
- a->ground_freq = 125.9;
- a->ground_active = false;
-
- //a->set_by_AI = true;
- //a->set_by_comm_search = false;
-
- airport_atc_map[(string)"KEMT"] = a;
+ // Initialise the frequency search map
+ current_commlist = new FGCommList;
+ SGPath p_comm( globals->get_fg_root() );
+ current_commlist->init( p_comm );
#ifdef ENABLE_AUDIO_SUPPORT
// Load all available voices.
// For now we'll do one hardwired one
- voiceOK = v1.LoadVoice("default");
+
+ v1 = new FGATCVoice;
+ voiceOK = v1->LoadVoice("default");
+ voice = true;
+
/* I've loaded the voice even if /sim/sound/audible is false
* since I know no way of forcing load of the voice if the user
* subsequently switches /sim/sound/audible to true. */
#else
voice = false;
#endif
+
+ // Initialise the ATC Dialogs
+ //cout << "Initing Transmissions..." << endl;
+ SG_LOG(SG_ATC, SG_INFO, " ATC Transmissions");
+ current_transmissionlist = new FGTransmissionList;
+ SGPath p_transmission( globals->get_fg_root() );
+ p_transmission.append( "ATC/default.transmissions" );
+ current_transmissionlist->init( p_transmission );
+ //cout << "Done Transmissions" << endl;
+
+ SG_LOG(SG_ATC, SG_INFO, " ATC Dialog System");
+ current_atcdialog = new FGATCDialog;
+ current_atcdialog->Init();
+
+ ATCDialogInit();
+
+ // DCL - testing
+ //current_atcdialog->add_entry( "EGNX", "Request vectoring for approach", "Request Vectors" );
+ //current_atcdialog->add_entry( "EGNX", "Mayday, Mayday", "Declare Emergency" );
}
void FGATCMgr::update(double dt) {
+ //cout << "Entering update..." << endl;
//Traverse the list of active stations.
//Only update one class per update step to avoid the whole ATC system having to calculate between frames.
//Eventually we should only update every so many steps.
if(atc_list_itr == atc_list.end()) {
atc_list_itr = atc_list.begin();
}
- (*atc_list_itr)->Update();
+ //cout << "Updating " << (*atc_list_itr)->get_ident() << ' ' << (*atc_list_itr)->GetType() << '\n';
+ //cout << "Freq = " << (*atc_list_itr)->get_freq() << '\n';
+ (*atc_list_itr)->Update(dt * atc_list.size());
+ //cout << "Done ATC update..." << endl;
++atc_list_itr;
}
// Search the tuned frequencies every now and then - this should be done with the event scheduler
static int i = 0;
+ if(i == 7) {
+ //cout << "About to AreaSearch()" << endl;
+ AreaSearch();
+ }
+ if(i == 15) {
+ //cout << "About to search(1)" << endl;
+ FreqSearch(1);
+ }
if(i == 30) {
- Search();
+ //cout << "About to search(2)" << endl;
+ FreqSearch(2);
i = 0;
}
++i;
+
+ //cout << "comm1 type = " << comm_type[0] << '\n';
+ //cout << "Leaving update..." << endl;
}
-/*
-// Remove from list only if not needed by the AI system
-void FGATCMgr::CommRemoveFromList(const char* id, atc_type tp) {
- AirportATC a;
- if(GetAirportATCDetails((string)id, &a)) {
- if(a.set_by_AI) {
+
+
+// Returns frequency in KHz - should I alter this to return in MHz?
+unsigned short int FGATCMgr::GetFrequency(string ident, atc_type tp) {
+ ATCData test;
+ bool ok = current_commlist->FindByCode(ident, test, tp);
+ return(ok ? test.freq : 0);
+}
+
+
+// Register the fact that the AI system wants to activate an airport
+// Might need more sophistication in this in the future - eg registration by aircraft call-sign.
+bool FGATCMgr::AIRegisterAirport(string ident) {
+ SG_LOG(SG_ATC, SG_BULK, "AI registered airport " << ident << " with the ATC system");
+ if(airport_atc_map.find(ident) != airport_atc_map.end()) {
+ airport_atc_map[ident]->set_by_AI = true;
+ airport_atc_map[ident]->numAI++;
+ return(true);
+ } else {
+ FGAirport ap;
+ if(dclFindAirportID(ident, &ap)) {
+ //cout << "ident = " << ident << '\n';
+ AirportATC *a = new AirportATC;
+ // I'm not entirely sure that this AirportATC structure business is actually needed - it just duplicates what we can find out anyway!
+ a->lon = ap.longitude;
+ a->lat = ap.latitude;
+ a->elev = ap.elevation;
+ a->atis_freq = GetFrequency(ident, ATIS);
+ //cout << "ATIS freq = " << a->atis_freq << '\n';
+ a->atis_active = false;
+ a->tower_freq = GetFrequency(ident, TOWER);
+ //cout << "Tower freq = " << a->tower_freq << '\n';
+ a->tower_active = false;
+ a->ground_freq = GetFrequency(ident, GROUND);
+ //cout << "Ground freq = " << a->ground_freq << '\n';
+ a->ground_active = false;
+ // TODO - some airports will have a tower/ground frequency but be inactive overnight.
+ a->set_by_AI = true;
+ a->numAI = 1;
+ airport_atc_map[ident] = a;
+ return(true);
+ }
+ }
+ return(false);
+}
+
+
+// Register the fact that the comm radio is tuned to an airport
+// Channel is zero based
+bool FGATCMgr::CommRegisterAirport(string ident, int chan) {
+ SG_LOG(SG_ATC, SG_BULK, "Comm channel " << chan << " registered airport " << ident);
+ if(airport_atc_map.find(ident) != airport_atc_map.end()) {
+ //cout << "IN MAP - flagging set by comm..." << endl;
+ if(chan == 0) {
+ airport_atc_map[ident]->set_by_comm[0] = true;
+ } else if(chan == 1) {
+ airport_atc_map[ident]->set_by_comm[1] = true;
+ } else {
+ SG_LOG(SG_ATC, SG_ALERT, "COMM CHANNEL NOT 0 OR 1 IN FGATCMGR!");
+ // Just register both and accept the fact that this ATC will probably never get removed!
+ airport_atc_map[ident]->set_by_comm[0] = true;
+ airport_atc_map[ident]->set_by_comm[1] = true;
+ }
+ return(true);
+ } else {
+ //cout << "NOT IN MAP - creating new..." << endl;
+ FGAirport ap;
+ if(dclFindAirportID(ident, &ap)) {
+ AirportATC *a = new AirportATC;
+ // I'm not entirely sure that this AirportATC structure business is actually needed - it just duplicates what we can find out anyway!
+ a->lon = ap.longitude;
+ a->lat = ap.latitude;
+ a->elev = ap.elevation;
+ a->atis_freq = GetFrequency(ident, ATIS);
+ a->atis_active = false;
+ a->tower_freq = GetFrequency(ident, TOWER);
+ a->tower_active = false;
+ a->ground_freq = GetFrequency(ident, GROUND);
+ a->ground_active = false;
+ // TODO - some airports will have a tower/ground frequency but be inactive overnight.
+ a->set_by_AI = false;
+ a->numAI = 0;
+ if(chan == 0) {
+ a->set_by_comm[0] = true;
+ } else if(chan == 1) {
+ a->set_by_comm[1] = true;
+ } else {
+ SG_LOG(SG_ATC, SG_ALERT, "COMM CHANNEL NOT 1 OR 2 IN FGATCMGR!");
+ // Just register both and accept the fact that this ATC will probably never get removed!
+ a->set_by_comm[0] = true;
+ a->set_by_comm[1] = true;
+ }
+ airport_atc_map[ident] = a;
+ return(true);
+ }
+ }
+ return(false);
+}
+
+
+// Remove from list only if not needed by the AI system or the other comm channel
+// Note that chan is zero based.
+void FGATCMgr::CommRemoveFromList(const char* id, atc_type tp, int chan) {
+ SG_LOG(SG_ATC, SG_BULK, "CommRemoveFromList called for airport " << id << " by channel " << chan);
+ if(airport_atc_map.find((string)id) != airport_atc_map.end()) {
+ AirportATC* a = airport_atc_map[(string)id];
+ //cout << "In CommRemoveFromList, a->ground_freq = " << a->ground_freq << endl;
+ if(a->set_by_AI) {
// Don't remove
- a.set_by_comm_search = false;
+ FGATC* aptr = GetATCPointer((string)id, tp);
+ switch(chan) {
+ case 0:
+ //cout << "chan 1\n";
+ a->set_by_comm[0] = false;
+ if(!a->set_by_comm[1]) {
+ //cout << "not set by comm2\n";
+ if(aptr != NULL) {
+ //cout << "Got pointer\n";
+ aptr->SetNoDisplay();
+ //cout << "Setting no display...\n";
+ } else {
+ //cout << "Not got pointer\n";
+ }
+ }
+ break;
+ case 1:
+ a->set_by_comm[1] = false;
+ if(!a->set_by_comm[0]) {
+ if(aptr != NULL) {
+ aptr->SetNoDisplay();
+ //cout << "Setting no display...\n";
+ }
+ }
+ break;
+ }
airport_atc_map[(string)id] = a;
return;
} else {
- // remove
+ switch(chan) {
+ case 0:
+ a->set_by_comm[0] = false;
+ // Remove only if not also set by the other comm channel
+ if(!a->set_by_comm[1]) {
+ RemoveFromList(id, tp);
+ }
+ break;
+ case 1:
+ a->set_by_comm[1] = false;
+ if(!a->set_by_comm[0]) {
+ RemoveFromList(id, tp);
+ }
+ break;
+ }
}
}
}
-*/
+
// Remove from list - should only be called from above or similar
+// This function *will* remove it from the list regardless of who else might want it.
void FGATCMgr::RemoveFromList(const char* id, atc_type tp) {
//cout << "Requested type = " << tp << '\n';
//cout << "id = " << id << '\n';
atc_list_itr = atc_list.begin();
while(atc_list_itr != atc_list.end()) {
//cout << "type = " << (*atc_list_itr)->GetType() << '\n';
- //cout << "Ident = " << (*atc_list_itr)->GetIdent() << '\n';
- if( (!strcmp((*atc_list_itr)->GetIdent(), id))
+ //cout << "Ident = " << (*atc_list_itr)->get_ident() << '\n';
+ if( (!strcmp((*atc_list_itr)->get_ident(), id))
&& ((*atc_list_itr)->GetType() == tp) ) {
//Before removing it stop it transmitting!!
//cout << "OBLITERATING FROM LIST!!!\n";
(*atc_list_itr)->SetNoDisplay();
- (*atc_list_itr)->Update();
+ (*atc_list_itr)->Update(0.00833);
delete (*atc_list_itr);
atc_list_itr = atc_list.erase(atc_list_itr);
break;
}
-//DCL - this routine untested so far.
// Find in list - return a currently active ATC pointer given ICAO code and type
+// Return NULL if the given service is not in the list
+// - *** THE CALLING FUNCTION MUST CHECK FOR THIS ***
FGATC* FGATCMgr::FindInList(const char* id, atc_type tp) {
atc_list_itr = atc_list.begin();
while(atc_list_itr != atc_list.end()) {
- if( (!strcmp((*atc_list_itr)->GetIdent(), id))
- && ((*atc_list_itr)->GetType() == tp) ) {
- return(*atc_list_itr);
- } // Note that that can upset where we are in the list but that shouldn't really matter
+ if( (!strcmp((*atc_list_itr)->get_ident(), id))
+ && ((*atc_list_itr)->GetType() == tp) ) {
+ return(*atc_list_itr);
+ } // Note that that can upset where we are in the list but that shouldn't really matter
++atc_list_itr;
}
- // We need a fallback position
- SG_LOG(SG_GENERAL, SG_ALERT, "*** Failed to find FGATC* in FGATCMgr::FindInList - this should not happen!");
+ // If we get here it's not in the list
return(NULL);
}
// Return a pointer to a given sort of ATC at a given airport and activate if necessary
-// ONLY CALL THIS FUNCTION AFTER FIRST CHECKING THE SERVICE EXISTS BY CALLING GetAirportATCDetails
-// FIXME - we really ought to take out the necessity for two function calls by simply returning
-// a NULL pointer if the service doesn't exist and requiring the caller to check for it (NULL).
+// Returns NULL if service doesn't exist - calling function should check for this.
+// We really ought to make this private and call it from the CommRegisterAirport / AIRegisterAirport functions
+// - at the moment all these GetATC... functions exposed are just too complicated.
FGATC* FGATCMgr::GetATCPointer(string icao, atc_type type) {
+ if(airport_atc_map.find(icao) == airport_atc_map.end()) {
+ return NULL;
+ }
AirportATC *a = airport_atc_map[icao];
//cout << "a->lon = " << a->lon << '\n';
//cout << "a->elev = " << a->elev << '\n';
//cout << "a->tower_freq = " << a->tower_freq << '\n';
switch(type) {
- case TOWER:
+ case TOWER:
if(a->tower_active) {
// Get the pointer from the list
- return(FindInList(icao.c_str(), type)); // DCL - this untested so far.
+ return(FindInList(icao.c_str(), type));
} else {
- FGTower* t = new FGTower;
- if(current_towerlist->query(a->lon, a->lat, a->elev, a->tower_freq, &tower)) {
- *t = tower;
+ ATCData data;
+ if(current_commlist->FindByFreq(a->lon, a->lat, a->elev, a->tower_freq, &data, TOWER)) {
+ FGTower* t = new FGTower;
+ t->SetData(&data);
atc_list.push_back(t);
a->tower_active = true;
airport_atc_map[icao] = a;
+ t->Init();
return(t);
} else {
- cout << "ERROR - tower that should exist in FGATCMgr::GetATCPointer for airport " << icao << " not found\n";
+ SG_LOG(SG_ATC, SG_ALERT, "ERROR - tower that should exist in FGATCMgr::GetATCPointer for airport " << icao << " not found");
}
}
break;
- // Lets add the rest to get rid of the compiler warnings even though we don't need them yet.
- case APPROACH:
+ case APPROACH:
break;
- case ATIS:
- SG_LOG(SG_GENERAL, SG_ALERT, "ERROR - ATIS station should not be requested from FGATCMgr::GetATCPointer");
+ case ATIS:
+ SG_LOG(SG_ATC, SG_ALERT, "ERROR - ATIS station should not be requested from FGATCMgr::GetATCPointer");
break;
- case GROUND:
+ case GROUND:
+ //cout << "IN CASE GROUND" << endl;
+ if(a->ground_active) {
+ // Get the pointer from the list
+ return(FindInList(icao.c_str(), type));
+ } else {
+ ATCData data;
+ if(current_commlist->FindByFreq(a->lon, a->lat, a->elev, a->ground_freq, &data, GROUND)) {
+ FGGround* g = new FGGround;
+ g->SetData(&data);
+ atc_list.push_back(g);
+ a->ground_active = true;
+ airport_atc_map[icao] = a;
+ g->Init();
+ return(g);
+ } else {
+ SG_LOG(SG_ATC, SG_ALERT, "ERROR - ground control that should exist in FGATCMgr::GetATCPointer for airport " << icao << " not found");
+ }
+ }
break;
case INVALID:
break;
break;
}
- SG_LOG(SG_GENERAL, SG_ALERT, "ERROR IN FGATCMgr - reached end of GetATCPointer");
+ SG_LOG(SG_ATC, SG_ALERT, "ERROR IN FGATCMgr - reached end of GetATCPointer");
return(NULL);
}
-
-// Render a transmission
-// Outputs the transmission either on screen or as audio depending on user preference
-// The repeating flag indicates whether the message should be repeated continuously or played once.
-void FGATCMgr::Render(string msg, bool repeating) {
-#ifdef ENABLE_AUDIO_SUPPORT
- voice = voiceOK && fgGetBool("/sim/sound/audible");
+// Return a pointer to an appropriate voice for a given type of ATC
+// creating the voice if necessary - ie. make sure exactly one copy
+// of every voice in use exists in memory.
+//
+// TODO - in the future this will get more complex and dole out country/airport
+// specific voices, and possible make sure that the same voice doesn't get used
+// at different airports in quick succession if a large enough selection are available.
+FGATCVoice* FGATCMgr::GetVoicePointer(atc_type type) {
+ // TODO - implement me better - maintain a list of loaded voices and other voices!!
if(voice) {
- int len;
- unsigned char* buf = v1.WriteMessage((char*)msg.c_str(), len, voice);
- if(voice) {
- FGSimpleSound* simple = new FGSimpleSound(buf, len);
- simple->set_volume(2.0);
- globals->get_soundmgr()->add(simple, refname);
- if(repeating) {
- globals->get_soundmgr()->play_looped(refname);
- } else {
- globals->get_soundmgr()->play_once(refname);
- }
- }
- delete[] buf;
- }
-#endif // ENABLE_AUDIO_SUPPORT
- if(!voice) {
- // first rip the underscores and the pause hints out of the string - these are for the convienience of the voice parser
- for(unsigned int i = 0; i < msg.length(); ++i) {
- if((msg.substr(i,1) == "_") || (msg.substr(i,1) == "/")) {
- msg[i] = ' ';
+ switch(type) {
+ case ATIS:
+ if(voiceOK) {
+ return(v1);
}
+ case TOWER:
+ return(NULL);
+ case APPROACH:
+ return(NULL);
+ case GROUND:
+ return(NULL);
+ default:
+ return(NULL);
}
- globals->get_ATC_display()->RegisterRepeatingMessage(msg);
+ return(NULL);
+ } else {
+ return(NULL);
}
- playing = true;
}
-
-// Cease rendering a transmission.
-// At the moment this can handle one transmission active at a time only.
-void FGATCMgr::NoRender() {
- if(playing) {
- if(voice) {
-#ifdef ENABLE_AUDIO_SUPPORT
- globals->get_soundmgr()->stop(refname);
- globals->get_soundmgr()->remove(refname);
-#endif
- } else {
- globals->get_ATC_display()->CancelRepeatingMessage();
- }
- playing = false;
- }
+// Display a dialog box with options relevant to the currently tuned ATC service.
+void FGATCMgr::doPopupDialog() {
+ ATCDoDialog(comm_type[0]); // FIXME - currently hardwired to comm1
}
-void FGATCMgr::Search() {
-
- ////////////////////////////////////////////////////////////////////////
- // Comm1.
- ////////////////////////////////////////////////////////////////////////
- //cout << "In FGATCMgr::Search() - atc_list.size = " << atc_list.size() << '\n';
-
- comm1_freq = comm1_node->getDoubleValue();
- //cout << "************* comm1_freq = " << comm1_freq << '\n';
- double lon = lon_node->getDoubleValue();
- double lat = lat_node->getDoubleValue();
- double elev = elev_node->getDoubleValue() * SG_FEET_TO_METER;
-
- // Store the comm1_type
- //atc_type old_comm1_type = comm1_type;
-
- // We must be able to generalise some of the repetetive searching below!
+// Search for ATC stations by frequency
+void FGATCMgr::FreqSearch(int channel) {
+ int chan = channel - 1; // Convert to zero-based for the arrays
+
+ ATCData data;
+ double freq = comm_node[chan]->getDoubleValue();
+ lon = lon_node->getDoubleValue();
+ lat = lat_node->getDoubleValue();
+ elev = elev_node->getDoubleValue() * SG_FEET_TO_METER;
- //Search for ATIS first
- if(current_atislist->query(lon, lat, elev, comm1_freq, &atis)) {
- //cout << "atis found in radiostack search !!!!" << endl;
- //cout << "last_comm1_atis_ident = " << last_comm1_atis_ident << '\n';
- //cout << "comm1_type " << comm1_type << '\n';
- comm1_atis_ident = atis.GetIdent();
- comm1_atis_valid = true;
- if(last_comm1_atis_ident != comm1_atis_ident) {
- if(last_comm1_atis_ident != "") {
- RemoveFromList(last_comm1_atis_ident, ATIS);
- }
- last_comm1_atis_ident = comm1_atis_ident;
- //cout << "last_comm1_atis_ident = " << last_comm1_atis_ident << '\n';
- comm1_type = ATIS;
- comm1_elev = atis.get_elev();
- comm1_range = FG_ATIS_DEFAULT_RANGE;
- comm1_effective_range = comm1_range;
- comm1_x = atis.get_x();
- comm1_y = atis.get_y();
- comm1_z = atis.get_z();
- FGATIS* a = new FGATIS;
- *a = atis;
- a->SetDisplay();
- atc_list.push_back(a);
- //cout << "Found a new atis station in range" << endl;
- //cout << " id = " << atis.GetIdent() << endl;
- return; //This rather assumes that we never have more than one type of station in range.
- }
- } else {
- if(comm1_atis_valid) {
- //cout << "Removing ATIS " << comm1_atis_ident << " from list\n";
- RemoveFromList(comm1_atis_ident, ATIS);
- comm1_atis_valid = false;
- if(comm1_type == ATIS) {
- comm1_type = INVALID;
+ // Query the data store and get the closest match if any
+ if(current_commlist->FindByFreq(lon, lat, elev, freq, &data)) {
+ // We have a match
+ // What's the logic?
+ // If this channel not previously valid then easy - add ATC to list
+ // If this channel was valid then - Have we tuned to a different service?
+ // If so - de-register one and add the other
+ if(comm_valid[chan]) {
+ if((comm_ident[chan] == data.ident) && (comm_type[chan] == data.type)) {
+ // Then we're still tuned into the same service so do nought and return
+ return;
+ } else {
+ // Something's changed - either the location or the service type
+ // We need to feed the channel in so we're not removing it if we're also tuned in on the other channel
+ CommRemoveFromList(comm_ident[chan], comm_type[chan], chan);
}
- comm1_atis_ident = "";
- //comm1_trans_ident = "";
- last_comm1_atis_ident = "";
}
- //cout << "not picking up atis" << endl;
- }
-
- //Next search for tower
- //cout << "comm1_freq = " << comm1_freq << '\n';
- if(current_towerlist->query(lon, lat, elev, comm1_freq, &tower)) {
- //cout << "tower found in radiostack search !!!!" << endl;
- comm1_tower_ident = tower.GetIdent();
- //cout << "comm1_tower_ident = " << comm1_tower_ident << '\n';
- comm1_tower_valid = true;
- if(last_comm1_tower_ident != comm1_tower_ident) {
- if(last_comm1_tower_ident != "") {
- RemoveFromList(last_comm1_tower_ident, TOWER);
+ // At this point we can assume that we need to add the service.
+ comm_ident[chan] = (data.ident).c_str();
+ comm_type[chan] = data.type;
+ comm_x[chan] = (double)data.x;
+ comm_y[chan] = (double)data.y;
+ comm_z[chan] = (double)data.z;
+ comm_lon[chan] = (double)data.lon;
+ comm_lat[chan] = (double)data.lat;
+ comm_elev[chan] = (double)data.elev;
+ comm_valid[chan] = true;
+
+ // This was a switch-case statement but the compiler didn't like the new variable creation with it.
+ if(comm_type[chan] == ATIS) {
+ CommRegisterAirport(comm_ident[chan], chan);
+ FGATC* app = FindInList(comm_ident[chan], TOWER);
+ if(app != NULL) {
+ // The station is already in the ATC list
+ //cout << "In list - flagging SetDisplay..." << endl;
+ app->SetDisplay();
+ } else {
+ // Generate the station and put in the ATC list
+ //cout << "Not in list - generating..." << endl;
+ FGATIS* a = new FGATIS;
+ a->SetData(&data);
+ comm_atc_ptr[chan] = a;
+ a->SetDisplay();
+ //a->Init();
+ atc_list.push_back(a);
}
- last_comm1_tower_ident = comm1_tower_ident;
- comm1_type = TOWER;
- comm1_elev = tower.get_elev();
- comm1_range = FG_TOWER_DEFAULT_RANGE;
- comm1_effective_range = comm1_range;
- comm1_x = tower.get_x();
- comm1_y = tower.get_y();
- comm1_z = tower.get_z();
- FGTower* t = new FGTower;
- *t = tower;
- t->SetDisplay();
- atc_list.push_back(t);
- //cout << "Found a new tower station in range" << endl;
- //cout << " id = " << tower.GetIdent() << endl;
- return; //This rather assumes that we never have more than one type of station in range.
- }
- } else {
- if(comm1_tower_valid) {
- //cout << "removing tower\n";
- RemoveFromList(comm1_tower_ident, TOWER);
- //comm1_valid = false;
- if(comm1_type == TOWER) {
- comm1_type = INVALID; // Only invalidate if we haven't switched it to something else
+ } else if (comm_type[chan] == TOWER) {
+ CommRegisterAirport(comm_ident[chan], chan);
+ //cout << "Done (TOWER)" << endl;
+ FGATC* app = FindInList(comm_ident[chan], TOWER);
+ if(app != NULL) {
+ // The station is already in the ATC list
+ //cout << "In list - flagging SetDisplay..." << endl;
+ app->SetDisplay();
+ } else {
+ // Generate the station and put in the ATC list
+ //cout << "Not in list - generating..." << endl;
+ FGTower* t = new FGTower;
+ t->SetData(&data);
+ comm_atc_ptr[chan] = t;
+ t->SetDisplay();
+ t->Init();
+ atc_list.push_back(t);
}
- comm1_tower_valid = false;
- comm1_tower_ident = "";
- last_comm1_tower_ident = "";
- //comm1_ident = "";
- //comm1_trans_ident = "";
- //last_comm1_ident = "";
- }
- //cout << "not picking up tower" << endl;
- }
- /*
- //Next search for Ground control
- if(current_groundlist->query(lon, lat, elev, comm1_freq, &ground)) {
- //cout << "Ground Control found in radiostack search !!!!" << endl;
- comm1_ident = ground.GetIdent();
- comm1_valid = true;
- if((last_comm1_ident != comm1_ident) || (comm1_type != GROUND)) {
- if(last_comm1_ident != "") {
- RemoveFromList(last_comm1_ident, GROUND);
+ } else if (comm_type[chan] == GROUND) {
+ CommRegisterAirport(comm_ident[chan], chan);
+ //cout << "Done (GROUND)" << endl;
+ FGATC* app = FindInList(comm_ident[chan], GROUND);
+ if(app != NULL) {
+ // The station is already in the ATC list
+ app->SetDisplay();
+ } else {
+ // Generate the station and put in the ATC list
+ FGGround* g = new FGGround;
+ g->SetData(&data);
+ comm_atc_ptr[chan] = g;
+ g->SetDisplay();
+ g->Init();
+ atc_list.push_back(g);
}
- last_comm1_ident = comm1_ident;
- comm1_type = GROUND;
- comm1_elev = ground.get_elev();
- comm1_range = FG_GROUND_DEFAULT_RANGE;
- comm1_effective_range = comm1_range;
- comm1_x = ground.get_x();
- comm1_y = ground.get_y();
- comm1_z = ground.get_z();
- FGGround* g = new FGGround;
- *g = ground;
- g->SetDisplay();
- atc_list.push_back(g);
- // For now we will automatically make contact with ground when the radio is tuned.
- // This rather assumes that the user tunes the radio at the appropriate place
- // (ie. having just turned off the runway) and only uses ground control on arrival
- // but its a start!
- g->NewArrival(current_plane);
- //cout << "Found a new ground station in range" << endl;
- //cout << " id = " << ground.GetIdent() << endl;
- return; //This rather assumes that we never have more than one type of station in range.
+ } else if (comm_type[chan] == APPROACH) {
+ // We have to be a bit more carefull here since approaches are also searched by area
+ CommRegisterAirport(comm_ident[chan], chan);
+ //cout << "Done (APPROACH)" << endl;
+ FGATC* app = FindInList(comm_ident[chan], APPROACH);
+ if(app != NULL) {
+ // The station is already in the ATC list
+ app->AddPlane("Player");
+ app->SetDisplay();
+ comm_atc_ptr[chan] = app;
+ } else {
+ // Generate the station and put in the ATC list
+ FGApproach* a = new FGApproach;
+ a->SetData(&data);
+ a->AddPlane("Player");
+ atc_list.push_back(a);
+ comm_atc_ptr[chan] = a;
+ }
}
} else {
- if((comm1_valid) && (comm1_type == GROUND)) {
- RemoveFromList(comm1_ident, GROUND);
- comm1_valid = false;
- comm1_type = INVALID;
- comm1_ident = "";
- //comm1_trans_ident = "";
- last_comm1_ident = "";
+ if(comm_valid[chan]) {
+ if(comm_type[chan] != APPROACH) {
+ // Currently approaches are removed by Alexander's out-of-range mechanism
+ CommRemoveFromList(comm_ident[chan], comm_type[chan], chan);
+ }
+ // Note that we *don't* call SetNoDisplay() here because the other comm channel
+ // might be tuned into the same station - this is handled by CommRemoveFromList(...)
+ comm_type[chan] = INVALID;
+ comm_atc_ptr[chan] = NULL;
+ comm_valid[chan] = false;
}
- //cout << "not picking up ground control" << endl;
}
- */
- // ================================================================================
+}
+
+
+// Search ATC stations by area in order that we appear 'on the radar'
+void FGATCMgr::AreaSearch() {
// Search for Approach stations
- // ================================================================================
- // init number of approach stations reachable by plane
- int num_app = 0;
+ comm_list_type approaches;
+ comm_list_iterator app_itr;
+
+ lon = lon_node->getDoubleValue();
+ lat = lat_node->getDoubleValue();
+ elev = elev_node->getDoubleValue() * SG_FEET_TO_METER;
// search stations in range
- current_approachlist->query_bck(lon, lat, elev, approaches, max_app, num_app);
+ int num_app = current_commlist->FindByPos(lon, lat, elev, 100.0, &approaches, APPROACH);
if (num_app != 0) {
//cout << num_app << " approaches found in radiostack search !!!!" << endl;
- for ( int i=0; i<num_app; i++ ) {
- bool new_app = true;
- approach_ident = approaches[i].GetIdent();
+ for(app_itr = approaches.begin(); app_itr != approaches.end(); app_itr++) {
- // check if station already exists on ATC stack
- atc_list_itr = atc_list.begin();
- while(atc_list_itr != atc_list.end()) {
- //cout << "ATC list: " << (*atc_list_itr)->GetIdent() << endl;
- if((!strcmp((*atc_list_itr)->GetIdent(), approach_ident))
- && ((*atc_list_itr)->GetType() == APPROACH) ) {
- new_app = false;
- string pid = "Player";
- (*atc_list_itr)->AddPlane(pid);
- (*atc_list_itr)->Update();
- break;
- }
- ++atc_list_itr;
- }
- // generate new Approach on ATC stack
- if (new_app) {
+ FGATC* app = FindInList((app_itr->ident).c_str(), app_itr->type);
+ if(app != NULL) {
+ // The station is already in the ATC list
+ app->AddPlane("Player");
+ //app->Update();
+ } else {
+ // Generate the station and put in the ATC list
FGApproach* a = new FGApproach;
- *a = approaches[i];
- string pid = "Player";
- a->AddPlane(pid);
- a->Update();
- a->SetDisplay();
+ a->SetData(&(*app_itr));
+ a->AddPlane("Player");
+ //a->Update();
atc_list.push_back(a);
- //cout << "Found a new approach station in range: Id = "
- // << approaches[i].GetIdent() << endl;
}
}
}
// remove planes which are out of range
+ // TODO - I'm not entirely sure that this belongs here.
atc_list_itr = atc_list.begin();
while(atc_list_itr != atc_list.end()) {
if((*atc_list_itr)->GetType() == APPROACH ) {
// if approach has no planes left remove it from ATC list
if ( np == 0) {
(*atc_list_itr)->SetNoDisplay();
- (*atc_list_itr)->Update();
+ (*atc_list_itr)->Update(0.00833);
delete (*atc_list_itr);
atc_list_itr = atc_list.erase(atc_list_itr);
break; // the other stations will be checked next time