#include <simgear/compiler.h>
#include <simgear/math/point3d.hxx>
#include <simgear/misc/sgstream.hxx>
-#include <simgear/math/sg_geodesy.hxx>
+//#include <simgear/math/sg_geodesy.hxx>
#include <plib/sg.h>
+//#include <Airports/runways.hxx>
#include STL_IOSTREAM
#include STL_STRING
SG_USING_STD(string);
-#ifndef SG_HAVE_NATIVE_SGI_COMPILERS
SG_USING_STD(ios);
-#endif
#include "ATC.hxx"
+//#include "ATCmgr.hxx"
+#include "ground.hxx"
+#include "ATCProjection.hxx"
+#include "AIPlane.hxx"
//DCL - a complete guess for now.
#define FG_TOWER_DEFAULT_RANGE 30
-// somewhere in the ATC/AI system we are going to have defined something like
-// struct plane_rec
-// list <PlaneRec> plane_rec_list_type
-
-class FGTower : public FGATC {
-
-private:
-
- // Need a data structure to hold details of the various active planes
- // or possibly another data structure with the positions of the inactive planes.
- // Need a data structure to hold outstanding communications from aircraft.
-
+enum tower_traffic_type {
+ CIRCUIT,
+ INBOUND,
+ OUTBOUND,
+ TTT_UNKNOWN, // departure, but we don't know if for circuits or leaving properly
+ STRAIGHT_IN
+ // Umm - what's the difference between INBOUND and STRAIGHT_IN ?
+};
+// Structure for holding details of a plane under tower control.
+// Not fixed yet - may include more stuff later.
+class TowerPlaneRec {
+
public:
+
+ TowerPlaneRec();
+ TowerPlaneRec(PlaneRec p);
+ TowerPlaneRec(Point3D pt);
+ TowerPlaneRec(PlaneRec p, Point3D pt);
+
+ FGAIPlane* planePtr; // This might move to the planeRec eventually
+ PlaneRec plane;
+
+ Point3D pos;
+ double eta; // seconds
+ double dist_out; // meters from theshold
+ bool clearedToLand;
+ bool clearedToLineUp;
+ bool clearedToTakeOff;
+ // ought to add time cleared to depart so we can nag if necessary
+ bool holdShortReported;
+ bool longFinalReported;
+ bool longFinalAcknowledged;
+ bool finalReported;
+ bool finalAcknowledged;
+ bool onRwy; // is physically on the runway
+ bool nextOnRwy; // currently projected by tower to be the next on the runway
+
+ double clearanceCounter; // Hack for communication timing - counter since clearance requested in seconds
+
+ // Type of operation the plane is doing
+ tower_traffic_type opType;
+
+ // Whereabouts in circuit if doing circuits
+ PatternLeg leg;
+
+ bool isUser; // true if this plane is the user
+};
- FGTower();
- ~FGTower();
-
- void Init();
- void Update();
+typedef list < TowerPlaneRec* > tower_plane_rec_list_type;
+typedef tower_plane_rec_list_type::iterator tower_plane_rec_list_iterator;
+typedef tower_plane_rec_list_type::const_iterator tower_plane_rec_list_const_iterator;
- inline void SetDisplay() {display = true;}
- inline void SetNoDisplay() {display = false;}
- inline char get_type() const { return type; }
- inline double get_lon() const { return lon; }
- inline double get_lat() const { return lat; }
- inline double get_elev() const { return elev; }
- inline double get_x() const { return x; }
- inline double get_y() const { return y; }
- inline double get_z() const { return z; }
- inline int get_freq() const { return freq; }
- inline int get_range() const { return range; }
- inline const char* GetIdent() { return ident.c_str(); }
- inline string get_trans_ident() { return trans_ident; }
- inline atc_type GetType() { return TOWER; }
+class FGTower : public FGATC {
- // Make a request of tower control
- //void Request(tower_request request);
+public:
+
+ FGTower();
+ ~FGTower();
+
+ void Init();
+
+ void Update(double dt);
+
+ void RequestLandingClearance(string ID);
+ void RequestDepartureClearance(string ID);
+ void ReportFinal(string ID);
+ void ReportLongFinal(string ID);
+ void ReportOuterMarker(string ID);
+ void ReportMiddleMarker(string ID);
+ void ReportInnerMarker(string ID);
+ void ReportGoingAround(string ID);
+ void ReportRunwayVacated(string ID);
+ void ReportReadyForDeparture(string ID);
+
+ // Contact tower when at a hold short for departure - for now we'll assume plane - maybe vehicles might want to cross runway eventually?
+ void ContactAtHoldShort(PlaneRec plane, FGAIPlane* requestee, tower_traffic_type operation);
+
+ // Public interface to the active runway - this will get more complex
+ // in the future and consider multi-runway use, airplane weight etc.
+ inline string GetActiveRunway() { return activeRwy; }
+ inline RunwayDetails GetActiveRunwayDetails() { return rwy; }
+
+ inline void SetDisplay() { display = true; }
+ inline void SetNoDisplay() { display = false; }
+
+ inline string get_trans_ident() { return trans_ident; }
+ inline atc_type GetType() { return TOWER; }
+
+ inline FGGround* GetGroundPtr() { return ground; }
private:
-
- char type;
- double lon, lat;
- double elev;
- double x, y, z;
- int freq;
- int range;
- bool display; // Flag to indicate whether we should be outputting to the ATC display.
- bool displaying; // Flag to indicate whether we are outputting to the ATC display.
- string ident; // Code of the airport its at.
- string name; // Name generally used in transmissions.
-
- // for failure modeling
- string trans_ident; // transmitted ident
- bool tower_failed; // tower failed?
-
- friend istream& operator>> ( istream&, FGTower& );
+ FGATCMgr* ATCmgr;
+ // This is purely for synactic convienience to avoid writing globals->get_ATC_mgr()-> all through the code!
+
+ // Figure out if a given position lies on the active runway
+ // Might have to change when we consider more than one active rwy.
+ bool OnActiveRunway(Point3D pt);
+
+ // Figure out if a given position lies on a runway or not
+ bool OnAnyRunway(Point3D pt);
+
+ // Calculate the eta of each plane to the threshold.
+ // For ground traffic this is the fastest they can get there.
+ // For air traffic this is the middle approximation.
+ void doThresholdETACalc();
+
+ // Order the list of traffic as per expected threshold use and flag any conflicts
+ bool doThresholdUseOrder();
+
+ void doCommunication();
+
+ void IssueLandingClearance(TowerPlaneRec* tpr);
+ void IssueGoAround(TowerPlaneRec* tpr);
+ void IssueDepartureClearance(TowerPlaneRec* tpr);
+
+ bool display; // Flag to indicate whether we should be outputting to the ATC display.
+ bool displaying; // Flag to indicate whether we are outputting to the ATC display.
+
+ // environment - need to make sure we're getting the surface winds and not winds aloft.
+ SGPropertyNode* wind_from_hdg; //degrees
+ SGPropertyNode* wind_speed_knots; //knots
+
+ double aptElev; // Airport elevation
+ string activeRwy; // Active runway number - For now we'll disregard multiple / alternate runway operation.
+ RunwayDetails rwy; // Assumed to be the active one for now.
+ bool rwyOccupied; // Active runway occupied flag. For now we'll disregard land-and-hold-short operations.
+ FGATCAlignedProjection ortho; // Orthogonal mapping of the local area with the active runway threshold at the origin
+
+ // Figure out which runways are active.
+ // For now we'll just be simple and do one active runway - eventually this will get much more complex
+ // This is a private function - public interface to the results of this is through GetActiveRunway
+ void DoRwyDetails();
+
+ // Need a data structure to hold details of the various active planes
+ // or possibly another data structure with the positions of the inactive planes.
+ // Need a data structure to hold outstanding communications from aircraft.
+
+ // Linked-list of planes on approach ordered with nearest first (timewise).
+ // Includes planes that have landed but not yet vacated runway.
+ // Somewhat analagous to the paper strips used (used to be used?) in real life.
+ // Doesn't include planes in circuit until they turn onto base/final?
+ tower_plane_rec_list_type appList;
+ tower_plane_rec_list_iterator appListItr;
+
+ // List of departed planes (planes doing circuits go into circuitList not depList after departure)
+ tower_plane_rec_list_type depList;
+ tower_plane_rec_list_iterator depListItr;
+
+ // List of planes in the circuit (ordered by nearest to landing first)
+ tower_plane_rec_list_type circuitList;
+ tower_plane_rec_list_iterator circuitListItr;
+
+ // List of planes waiting to depart
+ tower_plane_rec_list_type holdList;
+ tower_plane_rec_list_iterator holdListItr;
+
+ // List of planes on rwy
+ tower_plane_rec_list_type rwyList;
+ tower_plane_rec_list_iterator rwyListItr;
+
+ // List of all planes due to use a given rwy arranged in projected order of rwy use
+ tower_plane_rec_list_type trafficList; // TODO - needs to be expandable to more than one rwy
+ tower_plane_rec_list_iterator trafficListItr;
+
+ // Ground can be separate or handled by tower in real life.
+ // In the program we will always use a separate FGGround class, but we need to know
+ // whether it is supposed to be separate or not to give the correct instructions.
+ bool separateGround; // true if ground control is separate
+ FGGround* ground; // The ground control associated with this airport.
+
+ // for failure modeling
+ string trans_ident; // transmitted ident
+ bool tower_failed; // tower failed?
+
+ // Pointers to current users position and orientation
+ SGPropertyNode* user_lon_node;
+ SGPropertyNode* user_lat_node;
+ SGPropertyNode* user_elev_node;
+ SGPropertyNode* user_hdg_node;
+
+ // Details of the general traffic flow etc in the circuit
+ double crosswind_leg_pos; // Distance from threshold crosswind leg is being turned to in meters (actual operation - *not* ideal circuit)
+ double downwind_leg_pos; // Actual offset distance in meters from the runway that planes are flying the downwind leg
+ // Currently not sure whether the above should be always +ve or just take the natural orthopos sign (+ve for RH circuit, -ve for LH).
+ double base_leg_pos; // Actual offset distance from the threshold (-ve) that planes are turning to base leg.
+
+ friend istream& operator>> ( istream&, FGTower& );
};
-
-inline istream&
-operator >> ( istream& in, FGTower& t )
-{
- double f;
- char ch;
-
- in >> t.type;
-
- if ( t.type == '[' )
- return in >> skipeol;
-
- in >> t.lat >> t.lon >> t.elev >> f >> t.range
- >> t.ident;
-
- t.name = "";
- in >> ch;
- t.name += ch;
- while(1) {
- //in >> noskipws
- in.unsetf(ios::skipws);
- in >> ch;
- t.name += ch;
- if((ch == '"') || (ch == 0x0A)) {
- break;
- } // we shouldn't need the 0x0A but it makes a nice safely in case someone leaves off the "
- }
- in.setf(ios::skipws);
- //cout << "tower.name = " << t.name << '\n';
-
- t.freq = (int)(f*100.0 + 0.5);
-
- // cout << t.ident << endl;
-
- // generate cartesian coordinates
- Point3D geod( t.lon * SGD_DEGREES_TO_RADIANS, t.lat * SGD_DEGREES_TO_RADIANS, t.elev );
- Point3D cart = sgGeodToCart( geod );
- t.x = cart.x();
- t.y = cart.y();
- t.z = cart.z();
-
- t.trans_ident = t.ident;
- t.tower_failed = false;
-
- return in >> skipeol;
-}
-
-
#endif //_FG_TOWER_HXX
projects / flightgear.git / blobdiff