+
// groundnet.cxx - Implimentation of the FlightGear airport ground handling code
//
// Written by Durk Talsma, started June 2005.
#include <simgear/debug/logstream.hxx>
#include <simgear/route/waypoint.hxx>
#include <simgear/scene/material/EffectGeode.hxx>
+#include <simgear/scene/material/matlib.hxx>
+#include <simgear/scene/material/mat.hxx>
#include <Airports/simple.hxx>
#include <Airports/dynamics.hxx>
#include <AIModel/AIAircraft.hxx>
#include <AIModel/AIFlightPlan.hxx>
+#include <Scenery/scenery.hxx>
+
#include "groundnetwork.hxx"
/***************************************************************************
SGGeodesy::inverse(start->getGeod(), end->getGeod(), heading, az2, length);
double coveredDistance = length * 0.5;
SGGeodesy::direct(start->getGeod(), heading, coveredDistance, center, az2);
- cerr << "Centerpoint = (" << center.getLatitudeDeg() << ", " << center.getLongitudeDeg() << "). Heading = " << heading << endl;
+ //cerr << "Centerpoint = (" << center.getLatitudeDeg() << ", " << center.getLongitudeDeg() << "). Heading = " << heading << endl;
}
//maxDepth = 1000;
count = 0;
currTraffic = activeTraffic.begin();
+ group = 0;
}
if ((state >= minState) && (state <= maxState) && available) {
if ((msgDir == ATC_AIR_TO_GROUND) && isUserAircraft(i->getAircraft())) {
- cerr << "Checking state " << state << " for " << i->getAircraft()->getCallSign() << endl;
+ //cerr << "Checking state " << state << " for " << i->getAircraft()->getCallSign() << endl;
static SGPropertyNode_ptr trans_num = globals->get_props()->getNode("/sim/atc/transmission-num", true);
int n = trans_num->getIntValue();
- if (n >= 0) {
+ if (n == 0) {
trans_num->setIntValue(-1);
// PopupCallback(n);
- cerr << "Selected transmission message" << n << endl;
+ cerr << "Selected transmission message " << n << endl;
} else {
- cerr << "creading message for " << i->getAircraft()->getCallSign() << endl;
+ //cerr << "creating message for " << i->getAircraft()->getCallSign() << endl;
transmit(&(*i), msgId, msgDir, false);
return false;
}
-osg::Node* FGGroundNetwork::getRenderNode()
+
+void FGGroundNetwork::render(bool visible)
{
- osg::Group* group = new osg::Group;
- for ( FGTaxiSegmentVectorIterator i = segments.begin(); i != segments.end(); i++) {
- osg::Matrix obj_pos;
- osg::MatrixTransform *obj_trans = new osg::MatrixTransform;
- obj_trans->setDataVariance(osg::Object::STATIC);
- WorldCoordinate( obj_pos, (*i)->getLatitude(), (*i)->getLongitude(), parent->elevation()+10, -((*i)->getHeading()) );
+ SGMaterialLib *matlib = globals->get_matlib();
+ if (group) {
+ //int nr = ;
+ globals->get_scenery()->get_scene_graph()->removeChild(group);
+ //while (group->getNumChildren()) {
+ // cerr << "Number of children: " << group->getNumChildren() << endl;
+ simgear::EffectGeode* geode = (simgear::EffectGeode*) group->getChild(0);
+ //osg::MatrixTransform *obj_trans = (osg::MatrixTransform*) group->getChild(0);
+ //geode->releaseGLObjects();
+ //group->removeChild(geode);
+ //delete geode;
+ group = 0;
+ }
+ if (visible) {
+ group = new osg::Group;
+
+ //for ( FGTaxiSegmentVectorIterator i = segments.begin(); i != segments.end(); i++) {
+ double dx = 0;
+ for (TrafficVectorIterator i = activeTraffic.begin(); i != activeTraffic.end(); i++) {
+ // Handle start point
+ int pos = i->getCurrentPosition() - 1;
+ if (pos >= 0) {
+
+ SGGeod start(SGGeod::fromDeg((i->getLongitude()), (i->getLatitude())));
+ SGGeod end (SGGeod::fromDeg(segments[pos]->getEnd()->getLongitude(), segments[pos]->getEnd()->getLatitude()));
+
+ double length = SGGeodesy::distanceM(start, end);
+ //heading = SGGeodesy::headingDeg(start->getGeod(), end->getGeod());
+
+ double az2, heading; //, distanceM;
+ SGGeodesy::inverse(start, end, heading, az2, length);
+ double coveredDistance = length * 0.5;
+ SGGeod center;
+ SGGeodesy::direct(start, heading, coveredDistance, center, az2);
+ //cerr << "Active Aircraft : Centerpoint = (" << center.getLatitudeDeg() << ", " << center.getLongitudeDeg() << "). Heading = " << heading << endl;
+ ///////////////////////////////////////////////////////////////////////////////
+ // Make a helper function out of this
+ osg::Matrix obj_pos;
+ osg::MatrixTransform *obj_trans = new osg::MatrixTransform;
+ obj_trans->setDataVariance(osg::Object::STATIC);
+
+ WorldCoordinate( obj_pos, center.getLatitudeDeg(), center.getLongitudeDeg(), parent->elevation()+8+dx, -(heading) );
obj_trans->setMatrix( obj_pos );
- //osg::Vec3 center(0, 0, 0)
-
- float width = (*i)->getLength() /2.0;
- osg::Vec3 corner(-width, 0, 0.25f);
- osg::Vec3 widthVec(2*width + 1, 0, 0);
- osg::Vec3 heightVec(0, 0, 1);
- osg::Geometry* geometry;
- geometry = osg::createTexturedQuadGeometry(corner, widthVec, heightVec);
- simgear::EffectGeode* geode = new simgear::EffectGeode;
- geode->setName("test");
- geode->addDrawable(geometry);
- //osg::Node *custom_obj;
-
- obj_trans->addChild(geode);
- // wire as much of the scene graph together as we can
- //->addChild( obj_trans );
- group->addChild( obj_trans );
+ //osg::Vec3 center(0, 0, 0)
+
+ float width = length /2.0;
+ osg::Vec3 corner(-width, 0, 0.25f);
+ osg::Vec3 widthVec(2*width + 1, 0, 0);
+ osg::Vec3 heightVec(0, 1, 0);
+ osg::Geometry* geometry;
+ geometry = osg::createTexturedQuadGeometry(corner, widthVec, heightVec);
+ simgear::EffectGeode* geode = new simgear::EffectGeode;
+ geode->setName("test");
+ geode->addDrawable(geometry);
+ //osg::Node *custom_obj;
+ SGMaterial *mat = matlib->find("UnidirectionalTaper");
+ if (mat)
+ geode->setEffect(mat->get_effect());
+ obj_trans->addChild(geode);
+ // wire as much of the scene graph together as we can
+ //->addChild( obj_trans );
+ group->addChild( obj_trans );
+ /////////////////////////////////////////////////////////////////////
+ } else {
+ //cerr << "BIG FAT WARNING: current position is here : " << pos << endl;
+ }
+ for(intVecIterator j = (i)->getIntentions().begin(); j != (i)->getIntentions().end(); j++) {
+ osg::Matrix obj_pos;
+ int k = (*j)-1;
+ if (k >= 0) {
+ osg::MatrixTransform *obj_trans = new osg::MatrixTransform;
+ obj_trans->setDataVariance(osg::Object::STATIC);
+
+ WorldCoordinate( obj_pos, segments[k]->getLatitude(), segments[k]->getLongitude(), parent->elevation()+8+dx, -(segments[k]->getHeading()) );
+
+ obj_trans->setMatrix( obj_pos );
+ //osg::Vec3 center(0, 0, 0)
+
+ float width = segments[k]->getLength() /2.0;
+ osg::Vec3 corner(-width, 0, 0.25f);
+ osg::Vec3 widthVec(2*width + 1, 0, 0);
+ osg::Vec3 heightVec(0, 1, 0);
+ osg::Geometry* geometry;
+ geometry = osg::createTexturedQuadGeometry(corner, widthVec, heightVec);
+ simgear::EffectGeode* geode = new simgear::EffectGeode;
+ geode->setName("test");
+ geode->addDrawable(geometry);
+ //osg::Node *custom_obj;
+ SGMaterial *mat = matlib->find("UnidirectionalTaper");
+ if (mat)
+ geode->setEffect(mat->get_effect());
+ obj_trans->addChild(geode);
+ // wire as much of the scene graph together as we can
+ //->addChild( obj_trans );
+ group->addChild( obj_trans );
+ }
+ }
+ //dx += 0.1;
+ }
+ globals->get_scenery()->get_scene_graph()->addChild(group);
}
-
-
- return group;
}
\ No newline at end of file
projects / flightgear.git / blobdiff