#include <stdlib.h>
#include <algorithm>
+#include <simgear/structure/commands.hxx>
+#include <simgear/structure/exception.hxx>
+
+#include <Airports/simple.hxx>
#include <Main/fg_props.hxx>
+#include <Main/util.hxx>
+#include "environment_mgr.hxx"
#include "environment_ctrl.hxx"
SG_USING_STD(sort);
}
+\f
+////////////////////////////////////////////////////////////////////////
+// Implementation of FGMetarEnvironmentCtrl.
+////////////////////////////////////////////////////////////////////////
+
+FGMetarEnvironmentCtrl::FGMetarEnvironmentCtrl ()
+ : env( new FGInterpolateEnvironmentCtrl ),
+ _icao( "" ),
+ search_interval_sec( 60.0 ), // 1 minute
+ same_station_interval_sec( 900.0 ), // 15 minutes
+ search_elapsed( 9999.0 ),
+ fetch_elapsed( 9999.0 ),
+ proxy_host( fgGetNode("/sim/presets/proxy/host", true) ),
+ proxy_port( fgGetNode("/sim/presets/proxy/port", true) ),
+ proxy_auth( fgGetNode("/sim/presets/proxy/authentication", true) ),
+ metar_max_age( fgGetNode("/environment/params/metar-max-age-min", true) ),
+ _error_count( 0 ),
+ _dt( 0.0 ),
+ _error_dt( 0.0 )
+{
+#if defined(ENABLE_THREADS) && ENABLE_THREADS
+ thread = new MetarThread(this);
+ thread->start( 1 );
+#endif // ENABLE_THREADS
+}
+
+FGMetarEnvironmentCtrl::~FGMetarEnvironmentCtrl ()
+{
+#if defined(ENABLE_THREADS) && ENABLE_THREADS
+ thread->cancel();
+ thread->join();
+#endif // ENABLE_THREADS
+
+ delete env;
+ env = NULL;
+}
+
+
+// use a "command" to set station temp at station elevation
+static void set_temp_at_altitude( float temp_degc, float altitude_ft ) {
+ SGPropertyNode args;
+ SGPropertyNode *node = args.getNode("temp-degc", 0, true);
+ node->setFloatValue( temp_degc );
+ node = args.getNode("altitude-ft", 0, true);
+ node->setFloatValue( altitude_ft );
+ globals->get_commands()->execute("set-outside-air-temp-degc", &args);
+}
+
+
+static void set_dewpoint_at_altitude( float dewpoint_degc, float altitude_ft ) {
+ SGPropertyNode args;
+ SGPropertyNode *node = args.getNode("dewpoint-degc", 0, true);
+ node->setFloatValue( dewpoint_degc );
+ node = args.getNode("altitude-ft", 0, true);
+ node->setFloatValue( altitude_ft );
+ globals->get_commands()->execute("set-dewpoint-temp-degc", &args);
+}
+
+
+void
+FGMetarEnvironmentCtrl::update_env_config ()
+{
+ fgSetupWind( fgGetDouble("/environment/metar/base-wind-range-from"),
+ fgGetDouble("/environment/metar/base-wind-range-to"),
+ fgGetDouble("/environment/metar/base-wind-speed-kt"),
+ fgGetDouble("/environment/metar/gust-wind-speed-kt") );
+
+ fgDefaultWeatherValue( "visibility-m",
+ fgGetDouble("/environment/metar/min-visibility-m") );
+ set_temp_at_altitude( fgGetDouble("/environment/metar/temperature-degc"),
+ station_elevation_ft );
+ set_dewpoint_at_altitude( fgGetDouble("/environment/metar/dewpoint-degc"),
+ station_elevation_ft );
+ fgDefaultWeatherValue( "pressure-sea-level-inhg",
+ fgGetDouble("/environment/metar/pressure-inhg") );
+}
+
+void
+FGMetarEnvironmentCtrl::init ()
+{
+ const SGPropertyNode *longitude
+ = fgGetNode( "/position/longitude-deg", true );
+ const SGPropertyNode *latitude
+ = fgGetNode( "/position/latitude-deg", true );
+
+ bool found_metar = false;
+ long max_age = metar_max_age->getLongValue();
+ // Don't check max age during init so that we don't loop over a lot
+ // of airports metar if there is a problem.
+ // The update() calls will find a correct metar if things went wrong here
+ metar_max_age->setLongValue(60 * 24 * 7);
+
+ while ( !found_metar && (_error_count < 3) ) {
+ const FGAirport* a = globals->get_airports()
+ ->search( longitude->getDoubleValue(),
+ latitude->getDoubleValue(),
+ true );
+ if ( a ) {
+ FGMetarResult result = fetch_data( a->getId() );
+ if ( result.m != NULL ) {
+ SG_LOG( SG_GENERAL, SG_INFO, "closest station w/ metar = "
+ << a->getId());
+ last_apt = *a;
+ _icao = a->getId();
+ search_elapsed = 0.0;
+ fetch_elapsed = 0.0;
+ update_metar_properties( result.m );
+ update_env_config();
+ env->init();
+ found_metar = true;
+ } else {
+ // mark as no metar so it doesn't show up in subsequent
+ // searches.
+ SG_LOG( SG_GENERAL, SG_INFO, "no metar at metar = "
+ << a->getId() );
+ globals->get_airports()->no_metar( a->getId() );
+ }
+ }
+ }
+ metar_max_age->setLongValue(max_age);
+}
+
+void
+FGMetarEnvironmentCtrl::reinit ()
+{
+ _error_count = 0;
+ _error_dt = 0.0;
+
+#if 0
+ update_env_config();
+#endif
+
+ env->reinit();
+}
+
+void
+FGMetarEnvironmentCtrl::update(double delta_time_sec)
+{
+
+ _dt += delta_time_sec;
+ if (_error_count >= 3)
+ return;
+
+ FGMetarResult result;
+
+ static const SGPropertyNode *longitude
+ = fgGetNode( "/position/longitude-deg", true );
+ static const SGPropertyNode *latitude
+ = fgGetNode( "/position/latitude-deg", true );
+ search_elapsed += delta_time_sec;
+ fetch_elapsed += delta_time_sec;
+
+ // if time for a new search request, push it onto the request
+ // queue
+ if ( search_elapsed > search_interval_sec ) {
+ const FGAirport* a = globals->get_airports()
+ ->search( longitude->getDoubleValue(),
+ latitude->getDoubleValue(),
+ true );
+ if ( a ) {
+ if ( last_apt.getId() != a->getId()
+ || fetch_elapsed > same_station_interval_sec )
+ {
+ SG_LOG( SG_GENERAL, SG_INFO, "closest station w/ metar = "
+ << a->getId());
+ request_queue.push( a->getId() );
+ last_apt = *a;
+ _icao = a->getId();
+ search_elapsed = 0.0;
+ fetch_elapsed = 0.0;
+ } else {
+ search_elapsed = 0.0;
+ SG_LOG( SG_GENERAL, SG_INFO, "same station, waiting = "
+ << same_station_interval_sec - fetch_elapsed );
+ }
+ } else {
+ SG_LOG( SG_GENERAL, SG_WARN,
+ "Unable to find any airports with metar" );
+ }
+ }
+
+#if defined(ENABLE_THREADS) && ENABLE_THREADS
+ // No loader thread running so manually fetch the data
+ string id = "";
+ while ( !request_queue.empty() ) {
+ id = request_queue.front();
+ request_queue.pop();
+ }
+
+ if ( !id.empty() ) {
+ SG_LOG( SG_GENERAL, SG_INFO, "inline fetching = " << id );
+ result = fetch_data( id );
+ result_queue.push( result );
+ }
+#endif // ENABLE_THREADS
+
+ // process any results from the loader.
+ while ( !result_queue.empty() ) {
+ result = result_queue.front();
+ result_queue.pop();
+ if ( result.m != NULL ) {
+ update_metar_properties( result.m );
+ delete result.m;
+ update_env_config();
+ env->reinit();
+ } else {
+ // mark as no metar so it doesn't show up in subsequent
+ // searches, and signal an immediate re-search.
+ SG_LOG( SG_GENERAL, SG_WARN,
+ "no metar at station = " << result.icao );
+ globals->get_airports()->no_metar( result.icao );
+ search_elapsed = 9999.0;
+ }
+ }
+
+ env->update(delta_time_sec);
+}
+
+
+void
+FGMetarEnvironmentCtrl::setEnvironment (FGEnvironment * environment)
+{
+ env->setEnvironment(environment);
+}
+
+FGMetarResult
+FGMetarEnvironmentCtrl::fetch_data( const string &icao )
+{
+ FGMetarResult result;
+ result.icao = icao;
+
+ // if the last error was more than three seconds ago,
+ // then pretent nothing happened.
+ if (_error_dt < 3) {
+ _error_dt += _dt;
+
+ } else {
+ _error_dt = 0.0;
+ _error_count = 0;
+ }
+
+ // fetch station elevation if exists
+ const FGAirport* a = globals->get_airports()->search( icao );
+ if ( a ) {
+ station_elevation_ft = a->getElevation();
+ }
+
+ // fetch current metar data
+ try {
+ string host = proxy_host->getStringValue();
+ string auth = proxy_auth->getStringValue();
+ string port = proxy_port->getStringValue();
+ result.m = new FGMetar( icao, host, port, auth);
+
+ long max_age = metar_max_age->getLongValue();
+ if (max_age && result.m->getAge_min() > max_age) {
+ SG_LOG( SG_GENERAL, SG_WARN, "METAR data too old");
+ delete result.m;
+ result.m = NULL;
+ }
+
+ } catch (const sg_io_exception& e) {
+ SG_LOG( SG_GENERAL, SG_WARN, "Error fetching live weather data: "
+ << e.getFormattedMessage().c_str() );
+#if defined(ENABLE_THREADS) && ENABLE_THREADS
+ if (_error_count++ >= 3) {
+ SG_LOG( SG_GENERAL, SG_WARN, "Stop fetching data permanently.");
+ thread->cancel();
+ thread->join();
+ }
+#endif
+
+ result.m = NULL;
+ }
+
+ _dt = 0;
+
+ return result;
+}
+
+
+void
+FGMetarEnvironmentCtrl::update_metar_properties( const FGMetar *m )
+{
+ int i;
+ double d;
+ char s[128];
+
+ fgSetString("/environment/metar/real-metar", m->getData());
+ // don't update with real weather when we use a custom weather scenario
+ const char *current_scenario = fgGetString("/environment/weather-scenario", "METAR");
+ if( strcmp(current_scenario, "METAR") && strcmp(current_scenario, "none"))
+ return;
+ fgSetString("/environment/metar/last-metar", m->getData());
+ fgSetString("/environment/metar/station-id", m->getId());
+ fgSetDouble("/environment/metar/min-visibility-m",
+ m->getMinVisibility().getVisibility_m() );
+ fgSetDouble("/environment/metar/max-visibility-m",
+ m->getMaxVisibility().getVisibility_m() );
+
+ const SGMetarVisibility *dirvis = m->getDirVisibility();
+ for (i = 0; i < 8; i++, dirvis++) {
+ const char *min = "/environment/metar/visibility[%d]/min-m";
+ const char *max = "/environment/metar/visibility[%d]/max-m";
+
+ d = dirvis->getVisibility_m();
+
+ snprintf(s, 128, min, i);
+ fgSetDouble(s, d);
+ snprintf(s, 128, max, i);
+ fgSetDouble(s, d);
+ }
+
+ fgSetInt("/environment/metar/base-wind-range-from",
+ m->getWindRangeFrom() );
+ fgSetInt("/environment/metar/base-wind-range-to",
+ m->getWindRangeTo() );
+ fgSetDouble("/environment/metar/base-wind-speed-kt",
+ m->getWindSpeed_kt() );
+ fgSetDouble("/environment/metar/gust-wind-speed-kt",
+ m->getGustSpeed_kt() );
+ fgSetDouble("/environment/metar/temperature-degc",
+ m->getTemperature_C() );
+ fgSetDouble("/environment/metar/dewpoint-degc",
+ m->getDewpoint_C() );
+ fgSetDouble("/environment/metar/rel-humidity-norm",
+ m->getRelHumidity() );
+ fgSetDouble("/environment/metar/pressure-inhg",
+ m->getPressure_inHg() );
+
+ vector<SGMetarCloud> cv = m->getClouds();
+ vector<SGMetarCloud>::iterator cloud;
+
+ const char *cl = "/environment/clouds/layer[%i]";
+ for (i = 0, cloud = cv.begin(); cloud != cv.end(); cloud++, i++) {
+ const char *coverage_string[5] =
+ { "clear", "few", "scattered", "broken", "overcast" };
+ const double thickness[5] = { 0, 65, 600,750, 1000};
+ int q;
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/coverage", 128);
+ q = cloud->getCoverage();
+ fgSetString(s, coverage_string[q] );
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/elevation-ft", 128);
+ fgSetDouble(s, cloud->getAltitude_ft() + station_elevation_ft);
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/thickness-ft", 128);
+ fgSetDouble(s, thickness[q]);
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/span-m", 128);
+ fgSetDouble(s, 40000.0);
+ }
+
+ for (; i < FGEnvironmentMgr::MAX_CLOUD_LAYERS; i++) {
+ snprintf(s, 128, cl, i);
+ strncat(s, "/coverage", 128);
+ fgSetString(s, "clear");
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/elevation-ft", 128);
+ fgSetDouble(s, -9999);
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/thickness-ft", 128);
+ fgSetDouble(s, 0);
+
+ snprintf(s, 128, cl, i);
+ strncat(s, "/span-m", 128);
+ fgSetDouble(s, 40000.0);
+ }
+
+ fgSetDouble("/environment/metar/rain-norm", m->getRain());
+ fgSetDouble("/environment/metar/hail-norm", m->getHail());
+ fgSetDouble("/environment/metar/snow-norm", m->getSnow());
+ fgSetBool("/environment/metar/snow-cover", m->getSnowCover());
+}
+
+
+#if defined(ENABLE_THREADS) && ENABLE_THREADS
+/**
+ *
+ */
+void
+FGMetarEnvironmentCtrl::MetarThread::run()
+{
+ pthread_cleanup_push( metar_cleanup_handler, fetcher );
+ while ( true )
+ {
+ set_cancel( SGThread::CANCEL_DISABLE );
+
+ string icao = fetcher->request_queue.pop();
+ SG_LOG( SG_GENERAL, SG_INFO, "Thread: fetch metar data = " << icao );
+ FGMetarResult result = fetcher->fetch_data( icao );
+
+ set_cancel( SGThread::CANCEL_DEFERRED );
+
+ fetcher->result_queue.push( result );
+ }
+ pthread_cleanup_pop(1);
+}
+
+/**
+ * Ensure mutex is unlocked.
+ */
+void
+metar_cleanup_handler( void* arg )
+{
+ FGMetarEnvironmentCtrl* fetcher = (FGMetarEnvironmentCtrl*) arg;
+ fetcher->mutex.unlock();
+}
+#endif // ENABLE_THREADS
+
+
// end of environment_ctrl.cxx