INCLUDES
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
-#include "FGFDMExec.h"
#include "FGJSBBase.h"
-#include "input_output/FGXMLElement.h"
#include "math/FGColumnVector3.h"
#include <string>
-using std::string;
-using std::cerr;
-using std::endl;
-using std::cout;
-
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
DEFINITIONS
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
-#define ID_TANK "$Id$"
+#define ID_TANK "$Id: FGTank.h,v 1.26 2011/10/31 14:54:41 bcoconni Exp $"
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
FORWARD DECLARATIONS
namespace JSBSim {
+class Element;
+class FGPropertyManager;
+class FGFDMExec;
+
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
CLASS DOCUMENTATION
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
tree at <tt>propulsion/tank[i]/contents-lbs</tt>, where i is the tank number (Tanks
are automatically numbered, starting at zero, in the order in which they are read in
the aircraft configuration file). The latter method allows one to use a system of FCS
- components to control tank contents.
+ components to control tank contents.
+
+ There is also a property <tt>propulsion/tank[i]/external-flow-rate-pps</tt>. Setting
+ this property to a positive value causes the tank to fill at the rate specified.
+ Setting a negative number causes the tank to drain. The value is the rate in pounds
+ of fuel per second. The tank will not fill past 100% full and will not drain below 0%.
+ Fuel may be transfered between two tanks by setting the source tank's external flow rate
+ to a negative value and the destination's external flow rate to the same positive value.
+ Care must be taken to stop fuel flow before the source tank becomes empty to prevent
+ phantom fuel being created.
<h3>Configuration File Format:</h3>
<temperature> {number} </temperature> <!-- must be degrees fahrenheit -->
<standpipe unit="{LBS | KG"}> {number} </standpipe>
<priority> {integer} </priority>
+ <density unit="{KG/L | LBS/GAL}"> {number} </density>
+ <type> {string} </type> <!-- will override previous density setting -->
</tank>
@endcode
- \b temperature - Initial temperature, defaults to degrees Fahrenheit.
- \b standpipe - Minimum contents to which tank can dump, defaults to pounds.
- \b priority - Establishes feed sequence of tank. "1" is the highest priority.
+- \b density - Density of liquid tank contents.
+- \b type - Named fuel type. One of AVGAS, JET-A, JET-A1, JET-B, JP-1, JP-2, JP-3,
+- \b JP-4, JP-5, JP-6, JP-7, JP-8, JP-8+100, RP-1, T-1, ETHANOL, HYDRAZINE,
+- \b F-34, F-35, F-40, F-44, AVTAG, AVCAT
location:
- \b x - Location of tank on aircraft's x-axis, defaults to inches.
- \b temperature - -9999.0 (flag which indicates no temperature is set)
- \b standpipe - 0.0 (all contents may be dumped)
- \b priority - 1 (highest feed sequence priority)
+- \b density - 6.6
@author Jon Berndt, Dave Culp
@see Akbar, Raza et al. "A Simple Analysis of Fuel Addition to the CWT of
/// Destructor
~FGTank();
+ enum TankType {ttUNKNOWN, ttFUEL, ttOXIDIZER};
+ enum GrainType {gtUNKNOWN, gtCYLINDRICAL, gtENDBURNING};
+
/** Removes fuel from the tank.
This function removes fuel from a tank. If the tank empties, it is
deselected.
/** Performs local, tanks-specific calculations, such as fuel temperature.
This function calculates the temperature of the fuel in the tank.
@param dt the time step for this model.
+ @param TempC the Total Air Temperature in degrees Celsius.
@return the current temperature in degrees Celsius.
*/
- double Calculate(double dt);
+ double Calculate(double dt, double TempC);
/** Retrieves the type of tank: Fuel or Oxidizer.
@return the tank type, 0 for undefined, 1 for fuel, and 2 for oxidizer.
*/
- int GetType(void) {return Type;}
+ int GetType(void) const {return Type;}
/** Resets the tank parameters to the initial conditions */
void ResetToIC(void);
/** If the tank is set to supply fuel, this function returns true.
@return true if this tank is set to a non-zero priority.*/
- bool GetSelected(void) {return Selected;}
+ bool GetSelected(void) const {return Selected;}
/** Gets the tank fill level.
@return the fill level in percent, from 0 to 100.*/
- double GetPctFull(void) {return PctFull;}
+ double GetPctFull(void) const {return PctFull;}
/** Gets the capacity of the tank.
@return the capacity of the tank in pounds. */
- double GetCapacity(void) {return Capacity;}
+ double GetCapacity(void) const {return Capacity;}
+
+ /** Gets the capacity of the tank.
+ @return the capacity of the tank in gallons. */
+ double GetCapacityGallons(void) const {return Capacity/Density;}
/** Gets the contents of the tank.
@return the contents of the tank in pounds. */
double GetContents(void) const {return Contents;}
+ /** Gets the contents of the tank.
+ @return the contents of the tank in gallons. */
+ double GetContentsGallons(void) const {return Contents/Density;}
+
/** Gets the temperature of the fuel.
The temperature of the fuel is calculated if an initial tempearture is
given in the configuration file.
@return the temperature of the fuel in degrees C IF an initial temperature
is given, otherwise 0.0 C is returned. */
- double GetTemperature_degC(void) {return Temperature;}
+ double GetTemperature_degC(void) const {return Temperature;}
/** Gets the temperature of the fuel.
The temperature of the fuel is calculated if an initial tempearture is
given in the configuration file.
@return the temperature of the fuel in degrees F IF an initial temperature
is given, otherwise 32 degrees F is returned. */
- double GetTemperature(void) {return CelsiusToFahrenheit(Temperature);}
+ double GetTemperature(void) const {return CelsiusToFahrenheit(Temperature);}
+
+ /** Returns the density of a named fuel type.
+ @return the density, in lbs/gal, or 6.6 if name cannot be resolved. */
+ double ProcessFuelName(const std::string& name);
- double GetIxx(void) {return Ixx;}
- double GetIyy(void) {return Iyy;}
- double GetIzz(void) {return Izz;}
+ double GetIxx(void) const {return Ixx;}
+ double GetIyy(void) const {return Iyy;}
+ double GetIzz(void) const {return Izz;}
- double GetStandpipe(void) {return Standpipe;}
+ double GetStandpipe(void) const {return Standpipe;}
int GetPriority(void) const {return Priority;}
void SetPriority(int p) { Priority = p; Selected = p>0 ? true:false; }
- const FGColumnVector3 GetXYZ(void);
- const double GetXYZ(int idx);
+ double GetDensity(void) const {return Density;}
+ void SetDensity(double d) { Density = d; }
+
+ double GetExternalFlow(void) const {return ExternalFlow;}
+ void SetExternalFlow(double f) { ExternalFlow = f; }
+
+ FGColumnVector3 GetXYZ(void) const;
+ double GetXYZ(int idx) const;
+
+ const GrainType GetGrainType(void) const {return grainType;}
double Fill(double amount);
void SetContents(double amount);
+ void SetContentsGallons(double gallons);
void SetTemperature(double temp) { Temperature = temp; }
void SetStandpipe(double amount) { Standpipe = amount; }
void SetSelected(bool sel) { sel==true ? SetPriority(1):SetPriority(0); }
- enum TankType {ttUNKNOWN, ttFUEL, ttOXIDIZER};
- enum GrainType {gtUNKNOWN, gtCYLINDRICAL, gtENDBURNING};
-
private:
TankType Type;
GrainType grainType;
int TankNumber;
- string type;
- string strGType;
+ std::string type;
+ std::string strGType;
FGColumnVector3 vXYZ;
FGColumnVector3 vXYZ_drain;
double Capacity;
double Izz;
double PctFull;
double Contents, InitialContents;
+ double PreviousUsed;
double Area;
double Temperature, InitialTemperature;
double Standpipe, InitialStandpipe;
+ double ExternalFlow;
bool Selected;
int Priority, InitialPriority;
FGFDMExec* Exec;
FGPropertyManager* PropertyManager;
+
void CalculateInertias(void);
void Debug(int from);
};
projects / flightgear.git / blobdiff