#include <Main/fg_props.hxx>
+#include "Math.hpp"
#include "Jet.hpp"
#include "SimpleJet.hpp"
#include "Gear.hpp"
+#include "Hook.hpp"
+#include "Launchbar.hpp"
#include "Atmosphere.hpp"
#include "PropEngine.hpp"
#include "Propeller.hpp"
#include "PistonEngine.hpp"
+#include "TurbineEngine.hpp"
+#include "Rotor.hpp"
+#include "Rotorpart.hpp"
+#include "Hitch.hpp"
#include "FGFDM.hpp"
+
namespace yasim {
// Some conversion factors
static const float K2DEGF = 1.8;
static const float K2DEGFOFFSET = -459.4;
static const float CIN2CM = 1.6387064e-5;
+static const float YASIM_PI = 3.14159265358979323846;
+
+static const float NM2FTLB = (1/(LBS2N*FT2M));
// Stubs, so that this can be compiled without the FlightGear
// binary. What's the best way to handle this?
FGFDM::FGFDM()
{
+ _vehicle_radius = 0.0f;
+
_nextEngine = 0;
// Map /controls/flight/elevator to the approach elevator control. This
// should probably be settable, but there are very few aircraft
// who trim their approaches using things other than elevator.
_airplane.setElevatorControl(parseAxis("/controls/flight/elevator-trim"));
+
+ // FIXME: read seed from somewhere?
+ int seed = 0;
+ _turb = new Turbulence(10, seed);
}
FGFDM::~FGFDM()
}
for(i=0; i<_controlProps.size(); i++)
delete (PropOut*)_controlProps.get(i);
+ delete _turb;
}
void FGFDM::iterate(float dt)
getExternalInput(dt);
_airplane.iterate(dt);
- if(fgGetBool("/sim/freeze/fuel") != true)
- _airplane.consumeFuel(dt);
+ // Do fuel stuff (FIXME: should stash SGPropertyNode objects here)
+ char buf[256];
+ for(int i=0; i<_airplane.numThrusters(); i++) {
+ Thruster* t = _airplane.getThruster(i);
- setOutputProperties();
+ sprintf(buf, "/engines/engine[%d]/out-of-fuel", i);
+ t->setFuelState(!fgGetBool(buf));
+
+ sprintf(buf, "/engines/engine[%d]/fuel-consumed-lbs", i);
+ double consumed = fgGetDouble(buf) + dt * KG2LBS * t->getFuelFlow();
+ fgSetDouble(buf, consumed);
+ }
+ for(int i=0; i<_airplane.numTanks(); i++) {
+ sprintf(buf, "/consumables/fuel/tank[%d]/level-lbs", i);
+ _airplane.setFuel(i, LBS2KG * fgGetFloat(buf));
+ }
+ _airplane.calcFuelWeights();
+
+ setOutputProperties(dt);
}
Airplane* FGFDM::getAirplane()
// Allows the user to start with something other than full fuel
_airplane.setFuelFraction(fgGetFloat("/sim/fuel-fraction", 1));
+ // Read out the resulting fuel state
+ char buf[256];
+ for(int i=0; i<_airplane.numTanks(); i++) {
+ sprintf(buf, "/consumables/fuel/tank[%d]/level-lbs", i);
+ fgSetDouble(buf, _airplane.getFuel(i) * KG2LBS);
+
+ double density = _airplane.getFuelDensity(i);
+ sprintf(buf, "/consumables/fuel/tank[%d]/density-ppg", i);
+ fgSetDouble(buf, density * (KG2LBS/CM2GALS));
+
+// set in TankProperties class
+// sprintf(buf, "/consumables/fuel/tank[%d]/level-gal_us", i);
+// fgSetDouble(buf, _airplane.getFuel(i) * CM2GALS / density);
+
+ sprintf(buf, "/consumables/fuel/tank[%d]/capacity-gal_us", i);
+ fgSetDouble(buf, CM2GALS * _airplane.getTankCapacity(i)/density);
+ }
+
// This has a nasty habit of being false at startup. That's not
// good.
fgSetBool("/controls/gear/gear-down", true);
+
+ _airplane.getModel()->setTurbulence(_turb);
}
// Not the worlds safest parser. But it's short & sweet.
float spd = attrf(a, "speed") * KTS2MPS;
float alt = attrf(a, "alt", 0) * FT2M;
float aoa = attrf(a, "aoa", 0) * DEG2RAD;
- _airplane.setApproach(spd, alt, aoa);
+ float gla = attrf(a, "glide-angle", 0) * DEG2RAD;
+ _airplane.setApproach(spd, alt, aoa, attrf(a, "fuel", 0.2),gla);
_cruiseCurr = false;
} else if(eq(name, "cruise")) {
float spd = attrf(a, "speed") * KTS2MPS;
float alt = attrf(a, "alt") * FT2M;
- _airplane.setCruise(spd, alt);
+ float gla = attrf(a, "glide-angle", 0) * DEG2RAD;
+ _airplane.setCruise(spd, alt, attrf(a, "fuel", 0.5),gla);
_cruiseCurr = true;
+ } else if(eq(name, "solve-weight")) {
+ int idx = attri(a, "idx");
+ float wgt = attrf(a, "weight") * LBS2KG;
+ _airplane.addSolutionWeight(!_cruiseCurr, idx, wgt);
} else if(eq(name, "cockpit")) {
v[0] = attrf(a, "x");
v[1] = attrf(a, "y");
v[2] = attrf(a, "z");
_airplane.setPilotPos(v);
+ } else if(eq(name, "rotor")) {
+ _airplane.getModel()->getRotorgear()->addRotor(parseRotor(a, name));
+ } else if(eq(name, "rotorgear")) {
+ Rotorgear* r = _airplane.getModel()->getRotorgear();
+ _currObj = r;
+ #define p(x) if (a->hasAttribute(#x)) r->setParameter((char *)#x,attrf(a,#x) );
+ #define p2(x,y) if (a->hasAttribute(y)) r->setParameter((char *)#x,attrf(a,y) );
+ p2(max_power_engine,"max-power-engine")
+ p2(engine_prop_factor,"engine-prop-factor")
+ p(yasimdragfactor)
+ p(yasimliftfactor)
+ p2(max_power_rotor_brake,"max-power-rotor-brake")
+ p2(rotorgear_friction,"rotorgear-friction")
+ p2(engine_accel_limit,"engine-accel-limit")
+ #undef p
+ #undef p2
+ r->setInUse();
} else if(eq(name, "wing")) {
_airplane.setWing(parseWing(a, name));
} else if(eq(name, "hstab")) {
_airplane.setTail(parseWing(a, name));
- } else if(eq(name, "vstab")) {
+ } else if(eq(name, "vstab") || eq(name, "mstab")) {
_airplane.addVStab(parseWing(a, name));
+ } else if(eq(name, "piston-engine")) {
+ parsePistonEngine(a);
+ } else if(eq(name, "turbine-engine")) {
+ parseTurbineEngine(a);
} else if(eq(name, "propeller")) {
parsePropeller(a);
} else if(eq(name, "thruster")) {
j->setMaxThrust(attrf(a, "thrust") * LBS2N,
attrf(a, "afterburner", 0) * LBS2N);
j->setVectorAngle(attrf(a, "rotate", 0) * DEG2RAD);
+ j->setReverseThrust(attrf(a, "reverse", 0.2));
float n1min = attrf(a, "n1-idle", 55);
float n1max = attrf(a, "n1-max", 102);
if(a->hasAttribute("epr")) j->setEPR(attrf(a, "epr"));
if(a->hasAttribute("exhaust-speed"))
j->setVMax(attrf(a, "exhaust-speed") * KTS2MPS);
+ if(a->hasAttribute("spool-time"))
+ j->setSpooling(attrf(a, "spool-time"));
j->setPosition(v);
_airplane.addThruster(j, mass, v);
er->eng = j;
er->prefix = dup(buf);
_thrusters.add(er);
+ } else if(eq(name, "hitch")) {
+ Hitch* h = new Hitch(a->getValue("name"));
+ _currObj = h;
+ v[0] = attrf(a, "x");
+ v[1] = attrf(a, "y");
+ v[2] = attrf(a, "z");
+ h->setPosition(v);
+ if(a->hasAttribute("force-is-calculated-by-other")) h->setForceIsCalculatedByOther(attrb(a,"force-is-calculated-by-other"));
+ _airplane.addHitch(h);
+ } else if(eq(name, "tow")) {
+ Hitch* h = (Hitch*)_currObj;
+ if(a->hasAttribute("length"))
+ h->setTowLength(attrf(a, "length"));
+ if(a->hasAttribute("elastic-constant"))
+ h->setTowElasticConstant(attrf(a, "elastic-constant"));
+ if(a->hasAttribute("break-force"))
+ h->setTowBreakForce(attrf(a, "break-force"));
+ if(a->hasAttribute("weight-per-meter"))
+ h->setTowWeightPerM(attrf(a, "weight-per-meter"));
+ if(a->hasAttribute("mp-auto-connect-period"))
+ h->setMpAutoConnectPeriod(attrf(a, "mp-auto-connect-period"));
+ } else if(eq(name, "winch")) {
+ Hitch* h = (Hitch*)_currObj;
+ double pos[3];
+ pos[0] = attrd(a, "x",0);
+ pos[1] = attrd(a, "y",0);
+ pos[2] = attrd(a, "z",0);
+ h->setWinchPosition(pos);
+ if(a->hasAttribute("max-speed"))
+ h->setWinchMaxSpeed(attrf(a, "max-speed"));
+ if(a->hasAttribute("power"))
+ h->setWinchPower(attrf(a, "power") * 1000);
+ if(a->hasAttribute("max-force"))
+ h->setWinchMaxForce(attrf(a, "max-force"));
+ if(a->hasAttribute("initial-tow-length"))
+ h->setWinchInitialTowLength(attrf(a, "initial-tow-length"));
+ if(a->hasAttribute("max-tow-length"))
+ h->setWinchMaxTowLength(attrf(a, "max-tow-length"));
+ if(a->hasAttribute("min-tow-length"))
+ h->setWinchMinTowLength(attrf(a, "min-tow-length"));
} else if(eq(name, "gear")) {
Gear* g = new Gear();
_currObj = g;
v[1] = attrf(a, "y");
v[2] = attrf(a, "z");
g->setPosition(v);
- v[0] = 0;
- v[1] = 0;
- v[2] = attrf(a, "compression", 1);
+ float nrm = Math::mag3(v);
+ if (_vehicle_radius < nrm)
+ _vehicle_radius = nrm;
+ if(a->hasAttribute("upx")) {
+ v[0] = attrf(a, "upx");
+ v[1] = attrf(a, "upy");
+ v[2] = attrf(a, "upz");
+ Math::unit3(v, v);
+ } else {
+ v[0] = 0;
+ v[1] = 0;
+ v[2] = 1;
+ }
+ for(int i=0; i<3; i++)
+ v[i] *= attrf(a, "compression", 1);
g->setCompression(v);
g->setBrake(attrf(a, "skid", 0));
+ g->setInitialLoad(attrf(a, "initial-load", 0));
g->setStaticFriction(attrf(a, "sfric", 0.8));
g->setDynamicFriction(attrf(a, "dfric", 0.7));
g->setSpring(attrf(a, "spring", 1));
g->setDamping(attrf(a, "damp", 1));
+ if(a->hasAttribute("on-water")) g->setOnWater(attrb(a,"on-water"));
+ if(a->hasAttribute("on-solid")) g->setOnSolid(attrb(a,"on-solid"));
+ if(a->hasAttribute("ignored-by-solver")) g->setIgnoreWhileSolving(attrb(a,"ignored-by-solver"));
+ g->setSpringFactorNotPlaning(attrf(a, "spring-factor-not-planing", 1));
+ g->setSpeedPlaning(attrf(a, "speed-planing", 0) * KTS2MPS);
+ g->setReduceFrictionByExtension(attrf(a, "reduce-friction-by-extension", 0));
_airplane.addGear(g);
+ } else if(eq(name, "hook")) {
+ Hook* h = new Hook();
+ _currObj = h;
+ v[0] = attrf(a, "x");
+ v[1] = attrf(a, "y");
+ v[2] = attrf(a, "z");
+ h->setPosition(v);
+ float length = attrf(a, "length", 1.0);
+ h->setLength(length);
+ float nrm = length+Math::mag3(v);
+ if (_vehicle_radius < nrm)
+ _vehicle_radius = nrm;
+ h->setDownAngle(attrf(a, "down-angle", 70) * DEG2RAD);
+ h->setUpAngle(attrf(a, "up-angle", 0) * DEG2RAD);
+ _airplane.addHook(h);
+ } else if(eq(name, "launchbar")) {
+ Launchbar* l = new Launchbar();
+ _currObj = l;
+ v[0] = attrf(a, "x");
+ v[1] = attrf(a, "y");
+ v[2] = attrf(a, "z");
+ l->setLaunchbarMount(v);
+ v[0] = attrf(a, "holdback-x", v[0]);
+ v[1] = attrf(a, "holdback-y", v[1]);
+ v[2] = attrf(a, "holdback-z", v[2]);
+ l->setHoldbackMount(v);
+ float length = attrf(a, "length", 1.0);
+ l->setLength(length);
+ l->setDownAngle(attrf(a, "down-angle", 45) * DEG2RAD);
+ l->setUpAngle(attrf(a, "up-angle", -45) * DEG2RAD);
+ l->setHoldbackLength(attrf(a, "holdback-length", 2.0));
+ _airplane.addLaunchbar(l);
} else if(eq(name, "fuselage")) {
float b[3];
v[0] = attrf(a, "ax");
b[2] = attrf(a, "bz");
float taper = attrf(a, "taper", 1);
float mid = attrf(a, "midpoint", 0.5);
- _airplane.addFuselage(v, b, attrf(a, "width"), taper, mid);
+ float cx = attrf(a, "cx", 1);
+ float cy = attrf(a, "cy", 1);
+ float cz = attrf(a, "cz", 1);
+ float idrag = attrf(a, "idrag", 1);
+ _airplane.addFuselage(v, b, attrf(a, "width"), taper, mid,
+ cx, cy, cz, idrag);
} else if(eq(name, "tank")) {
v[0] = attrf(a, "x");
v[1] = attrf(a, "y");
} else if(eq(name, "spoiler")) {
((Wing*)_currObj)->setSpoiler(attrf(a, "start"), attrf(a, "end"),
attrf(a, "lift"), attrf(a, "drag"));
+ /* } else if(eq(name, "collective")) {
+ ((Rotor*)_currObj)->setcollective(attrf(a, "min"), attrf(a, "max"));
+ } else if(eq(name, "cyclic")) {
+ ((Rotor*)_currObj)->setcyclic(attrf(a, "ail"), attrf(a, "ele"));
+ */
} else if(eq(name, "actionpt")) {
v[0] = attrf(a, "x");
v[1] = attrf(a, "y");
void FGFDM::getExternalInput(float dt)
{
+ char buf[256];
+
+ _turb->setMagnitude(fgGetFloat("/environment/turbulence/magnitude-norm"));
+ _turb->update(dt, fgGetFloat("/environment/turbulence/rate-hz"));
+
// The control axes
ControlMap* cm = _airplane.getControlMap();
cm->reset();
WeightRec* wr = (WeightRec*)_weights.get(i);
_airplane.setWeight(wr->handle, LBS2KG * fgGetFloat(wr->prop));
}
+
+ for(i=0; i<_thrusters.size(); i++) {
+ EngRec* er = (EngRec*)_thrusters.get(i);
+ Thruster* t = er->eng;
+
+ if(t->getPropEngine()) {
+ PropEngine* p = t->getPropEngine();
+ sprintf(buf, "%s/rpm", er->prefix);
+ p->setOmega(fgGetFloat(buf, 500) * RPM2RAD);
+ }
+ }
}
-void FGFDM::setOutputProperties()
+// Linearly "seeks" a property by the specified fraction of the way to
+// the target value. Used to emulate "slowly changing" output values.
+static void moveprop(SGPropertyNode* node, const char* prop,
+ float target, float frac)
{
- char buf[256];
+ float val = node->getFloatValue(prop);
+ if(frac > 1) frac = 1;
+ if(frac < 0) frac = 0;
+ val += (target - val) * frac;
+ node->setFloatValue(prop, val);
+}
+
+void FGFDM::setOutputProperties(float dt)
+{
+ // char buf[256];
int i;
float grossWgt = _airplane.getModel()->getBody()->getTotalMass() * KG2LBS;
p->prop->setFloatValue(val);
}
- float totalFuel = 0, totalCap = 0;
- float fuelDensity = 720; // in kg/m^3, default to gasoline: ~6 lb/gal
- for(i=0; i<_airplane.numTanks(); i++) {
- fuelDensity = _airplane.getFuelDensity(i);
- sprintf(buf, "/consumables/fuel/tank[%d]/level-gal_us", i);
- fgSetFloat(buf, CM2GALS*_airplane.getFuel(i)/fuelDensity);
- sprintf(buf, "/consumables/fuel/tank[%d]/level-lbs", i);
- fgSetFloat(buf, KG2LBS*_airplane.getFuel(i));
- totalFuel += _airplane.getFuel(i);
- totalCap += _airplane.getTankCapacity(i);
- }
- if(totalCap != 0) {
- fgSetFloat("/consumables/fuel/total-fuel-lbs", KG2LBS*totalFuel);
- fgSetFloat("/consumables/fuel/total-fuel-gals",
- CM2GALS*totalFuel/fuelDensity);
- fgSetFloat("/consumables/fuel/total-fuel-norm", totalFuel/totalCap);
+ for(i=0; i<_airplane.getRotorgear()->getNumRotors(); i++) {
+ Rotor*r=(Rotor*)_airplane.getRotorgear()->getRotor(i);
+ int j = 0;
+ float f;
+ char b[256];
+ while((j = r->getValueforFGSet(j, b, &f)))
+ if(b[0]) fgSetFloat(b,f);
+ j=0;
+ while((j = _airplane.getRotorgear()->getValueforFGSet(j, b, &f)))
+ if(b[0]) fgSetFloat(b,f);
+ for(j=0; j < r->numRotorparts(); j+=r->numRotorparts()>>2) {
+ Rotorpart* s = (Rotorpart*)r->getRotorpart(j);
+ char *b;
+ int k;
+ for(k=0; k<2; k++) {
+ b=s->getAlphaoutput(k);
+ if(b[0]) fgSetFloat(b, s->getAlpha(k));
+ }
+ }
}
+ // Use the density of the first tank, or a dummy value if no tanks
+ float fuelDensity = 1.0;
+ if(_airplane.numTanks())
+ fuelDensity = _airplane.getFuelDensity(0);
for(i=0; i<_thrusters.size(); i++) {
EngRec* er = (EngRec*)_thrusters.get(i);
Thruster* t = er->eng;
+ SGPropertyNode * node = fgGetNode("engines/engine", i, true);
+
+ // Set: running, cranking, prop-thrust, max-hp, power-pct
+ node->setBoolValue("running", t->isRunning());
+ node->setBoolValue("cranking", t->isCranking());
- sprintf(buf, "%s/fuel-flow-gph", er->prefix);
- fgSetFloat(buf, (t->getFuelFlow()/fuelDensity) * 3600 * CM2GALS);
+ float tmp[3];
+ t->getThrust(tmp);
+ float lbs = Math::mag3(tmp) * (KG2LBS/9.8);
+ node->setFloatValue("prop-thrust", lbs); // Deprecated name
+ node->setFloatValue("thrust-lbs", lbs);
+ node->setFloatValue("fuel-flow-gph",
+ (t->getFuelFlow()/fuelDensity) * 3600 * CM2GALS);
if(t->getPropEngine()) {
PropEngine* p = t->getPropEngine();
-
- sprintf(buf, "%s/rpm", er->prefix);
- fgSetFloat(buf, p->getOmega() / RPM2RAD);
- }
-
- if(t->getPistonEngine()) {
- PistonEngine* p = t->getPistonEngine();
-
- sprintf(buf, "%s/mp-osi", er->prefix);
- fgSetFloat(buf, p->getMP() * (1/INHG2PA));
-
- sprintf(buf, "%s/egt-degf", er->prefix);
- fgSetFloat(buf, p->getEGT() * K2DEGF + K2DEGFOFFSET);
+ node->setFloatValue("rpm", p->getOmega() * (1/RPM2RAD));
+ node->setFloatValue("torque-ftlb",
+ p->getEngine()->getTorque() * NM2FTLB);
+
+ if(p->getEngine()->isPistonEngine()) {
+ PistonEngine* pe = p->getEngine()->isPistonEngine();
+ node->setFloatValue("mp-osi", pe->getMP() * (1/INHG2PA));
+ node->setFloatValue("mp-inhg", pe->getMP() * (1/INHG2PA));
+ node->setFloatValue("egt-degf",
+ pe->getEGT() * K2DEGF + K2DEGFOFFSET);
+ node->setFloatValue("oil-temperature-degf",
+ pe->getOilTemp() * K2DEGF + K2DEGFOFFSET);
+ node->setFloatValue("boost-gauge-inhg",
+ pe->getBoost() * (1/INHG2PA));
+ } else if(p->getEngine()->isTurbineEngine()) {
+ TurbineEngine* te = p->getEngine()->isTurbineEngine();
+ node->setFloatValue("n2", te->getN2());
+ }
}
if(t->getJet()) {
Jet* j = t->getJet();
-
- sprintf(buf, "%s/n1", er->prefix);
- fgSetFloat(buf, j->getN1());
-
- sprintf(buf, "%s/n2", er->prefix);
- fgSetFloat(buf, j->getN2());
-
- sprintf(buf, "%s/epr", er->prefix);
- fgSetFloat(buf, j->getEPR());
-
- sprintf(buf, "%s/egt-degf", er->prefix);
- fgSetFloat(buf, j->getEGT() * K2DEGF + K2DEGFOFFSET);
+ node->setFloatValue("n1", j->getN1());
+ node->setFloatValue("n2", j->getN2());
+ node->setFloatValue("epr", j->getEPR());
+ node->setFloatValue("egt-degf",
+ j->getEGT() * K2DEGF + K2DEGFOFFSET);
+
+ // These are "unmodeled" values that are still needed for
+ // many cockpits. Tie them all to the N1 speed, but
+ // normalize the numbers to the range [0:1] so the
+ // cockpit code can scale them to the right values.
+ float pnorm = j->getPerfNorm();
+ moveprop(node, "oilp-norm", pnorm, dt/3); // 3s seek time
+ moveprop(node, "oilt-norm", pnorm, dt/30); // 30s
+ moveprop(node, "itt-norm", pnorm, dt/1); // 1s
}
}
}
w->setTaper(attrf(a, "taper", 1));
w->setDihedral(attrf(a, "dihedral", defDihed) * DEG2RAD);
w->setCamber(attrf(a, "camber", 0));
- w->setIncidence(attrf(a, "incidence", 0) * DEG2RAD);
- w->setTwist(attrf(a, "twist", 0) * DEG2RAD);
+
+ // These come in with positive indicating positive AoA, but the
+ // internals expect a rotation about the left-pointing Y axis, so
+ // invert the sign.
+ w->setIncidence(attrf(a, "incidence", 0) * DEG2RAD * -1);
+ w->setTwist(attrf(a, "twist", 0) * DEG2RAD * -1);
// The 70% is a magic number that sorta kinda seems to match known
// throttle settings to approach speed.
return w;
}
-void FGFDM::parsePropeller(XMLAttributes* a)
+Rotor* FGFDM::parseRotor(XMLAttributes* a, const char* type)
{
- float cg[3];
- cg[0] = attrf(a, "x");
- cg[1] = attrf(a, "y");
- cg[2] = attrf(a, "z");
- float mass = attrf(a, "mass") * LBS2KG;
- float moment = attrf(a, "moment");
- float radius = attrf(a, "radius");
- float speed = attrf(a, "cruise-speed") * KTS2MPS;
- float omega = attrf(a, "cruise-rpm") * RPM2RAD;
- float power = attrf(a, "cruise-power") * HP2W;
- float rho = Atmosphere::getStdDensity(attrf(a, "cruise-alt") * FT2M);
+ Rotor* w = new Rotor();
+
+ // float defDihed = 0;
+
+ float pos[3];
+ pos[0] = attrf(a, "x");
+ pos[1] = attrf(a, "y");
+ pos[2] = attrf(a, "z");
+ w->setBase(pos);
- // Hack, fix this pronto:
+ float normal[3];
+ normal[0] = attrf(a, "nx");
+ normal[1] = attrf(a, "ny");
+ normal[2] = attrf(a, "nz");
+ w->setNormal(normal);
+
+ float forward[3];
+ forward[0] = attrf(a, "fx");
+ forward[1] = attrf(a, "fy");
+ forward[2] = attrf(a, "fz");
+ w->setForward(forward);
+
+ w->setMaxCyclicail(attrf(a, "maxcyclicail", 7.6));
+ w->setMaxCyclicele(attrf(a, "maxcyclicele", 4.94));
+ w->setMinCyclicail(attrf(a, "mincyclicail", -7.6));
+ w->setMinCyclicele(attrf(a, "mincyclicele", -4.94));
+ w->setMaxCollective(attrf(a, "maxcollective", 15.8));
+ w->setMinCollective(attrf(a, "mincollective", -0.2));
+ w->setDiameter(attrf(a, "diameter", 10.2));
+ w->setWeightPerBlade(attrf(a, "weightperblade", 44));
+ w->setNumberOfBlades(attrf(a, "numblades", 4));
+ w->setRelBladeCenter(attrf(a, "relbladecenter", 0.7));
+ w->setDynamic(attrf(a, "dynamic", 0.7));
+ w->setDelta3(attrf(a, "delta3", 0));
+ w->setDelta(attrf(a, "delta", 0));
+ w->setTranslift(attrf(a, "translift", 0.05));
+ w->setC2(attrf(a, "dragfactor", 1));
+ w->setStepspersecond(attrf(a, "stepspersecond", 120));
+ w->setPhiNull((attrf(a, "phi0", 0))*YASIM_PI/180);
+ w->setRPM(attrf(a, "rpm", 424));
+ w->setRelLenHinge(attrf(a, "rellenflaphinge", 0.07));
+ w->setAlpha0((attrf(a, "flap0", -5))*YASIM_PI/180);
+ w->setAlphamin((attrf(a, "flapmin", -15))/180*YASIM_PI);
+ w->setAlphamax((attrf(a, "flapmax", 15))*YASIM_PI/180);
+ w->setAlpha0factor(attrf(a, "flap0factor", 1));
+ w->setTeeterdamp(attrf(a,"teeterdamp",.0001));
+ w->setMaxteeterdamp(attrf(a,"maxteeterdamp",1000));
+ w->setRelLenTeeterHinge(attrf(a,"rellenteeterhinge",0.01));
+ w->setBalance(attrf(a,"balance",1.0));
+ w->setMinTiltYaw(attrf(a,"mintiltyaw",0.0));
+ w->setMinTiltPitch(attrf(a,"mintiltpitch",0.0));
+ w->setMinTiltRoll(attrf(a,"mintiltroll",0.0));
+ w->setMaxTiltYaw(attrf(a,"maxtiltyaw",0.0));
+ w->setMaxTiltPitch(attrf(a,"maxtiltpitch",0.0));
+ w->setMaxTiltRoll(attrf(a,"maxtiltroll",0.0));
+ w->setTiltCenterX(attrf(a,"tiltcenterx",0.0));
+ w->setTiltCenterY(attrf(a,"tiltcentery",0.0));
+ w->setTiltCenterZ(attrf(a,"tiltcenterz",0.0));
+ w->setDownwashFactor(attrf(a, "downwashfactor", 1));
+ if(attrb(a,"ccw"))
+ w->setCcw(1);
+ if(attrb(a,"sharedflaphinge"))
+ w->setSharedFlapHinge(true);
+
+ if(a->hasAttribute("name"))
+ w->setName(a->getValue("name") );
+ if(a->hasAttribute("alphaout0"))
+ w->setAlphaoutput(0,a->getValue("alphaout0") );
+ if(a->hasAttribute("alphaout1")) w->setAlphaoutput(1,a->getValue("alphaout1") );
+ if(a->hasAttribute("alphaout2")) w->setAlphaoutput(2,a->getValue("alphaout2") );
+ if(a->hasAttribute("alphaout3")) w->setAlphaoutput(3,a->getValue("alphaout3") );
+ if(a->hasAttribute("coneout")) w->setAlphaoutput(4,a->getValue("coneout") );
+ if(a->hasAttribute("yawout")) w->setAlphaoutput(5,a->getValue("yawout") );
+ if(a->hasAttribute("rollout")) w->setAlphaoutput(6,a->getValue("rollout") );
+
+ w->setPitchA(attrf(a, "pitch-a", 10));
+ w->setPitchB(attrf(a, "pitch-b", 10));
+ w->setForceAtPitchA(attrf(a, "forceatpitch-a", 3000));
+ w->setPowerAtPitch0(attrf(a, "poweratpitch-0", 300));
+ w->setPowerAtPitchB(attrf(a, "poweratpitch-b", 3000));
+ if(attrb(a,"notorque"))
+ w->setNotorque(1);
+
+#define p(x) if (a->hasAttribute(#x)) w->setParameter((char *)#x,attrf(a,#x) );
+#define p2(x,y) if (a->hasAttribute(y)) w->setParameter((char *)#x,attrf(a,y) );
+ p2(translift_ve,"translift-ve")
+ p2(translift_maxfactor,"translift-maxfactor")
+ p2(ground_effect_constant,"ground-effect-constant")
+ p2(vortex_state_lift_factor,"vortex-state-lift-factor")
+ p2(vortex_state_c1,"vortex-state-c1")
+ p2(vortex_state_c2,"vortex-state-c2")
+ p2(vortex_state_c3,"vortex-state_c3")
+ p2(vortex_state_e1,"vortex-state-e1")
+ p2(vortex_state_e2,"vortex-state-e2")
+ p(twist)
+ p2(number_of_segments,"number-of-segments")
+ p2(number_of_parts,"number-of-parts")
+ p2(rel_len_where_incidence_is_measured,"rel-len-where-incidence-is-measured")
+ p(chord)
+ p(taper)
+ p2(airfoil_incidence_no_lift,"airfoil-incidence-no-lift")
+ p2(rel_len_blade_start,"rel-len-blade-start")
+ p2(incidence_stall_zero_speed,"incidence-stall-zero-speed")
+ p2(incidence_stall_half_sonic_speed,"incidence-stall-half-sonic-speed")
+ p2(lift_factor_stall,"lift-factor-stall")
+ p2(stall_change_over,"stall-change-over")
+ p2(drag_factor_stall,"drag-factor-stall")
+ p2(airfoil_lift_coefficient,"airfoil-lift-coefficient")
+ p2(airfoil_drag_coefficient0,"airfoil-drag-coefficient0")
+ p2(airfoil_drag_coefficient1,"airfoil-drag-coefficient1")
+ p2(cyclic_factor,"cyclic-factor")
+ p2(rotor_correction_factor,"rotor-correction-factor")
+#undef p
+#undef p2
+ _currObj = w;
+ return w;
+}
+
+void FGFDM::parsePistonEngine(XMLAttributes* a)
+{
float engP = attrf(a, "eng-power") * HP2W;
float engS = attrf(a, "eng-rpm") * RPM2RAD;
- Propeller* prop = new Propeller(radius, speed, omega, rho, power);
PistonEngine* eng = new PistonEngine(engP, engS);
- PropEngine* thruster = new PropEngine(prop, eng, moment);
- _airplane.addThruster(thruster, mass, cg);
if(a->hasAttribute("displacement"))
eng->setDisplacement(attrf(a, "displacement") * CIN2CM);
if(a->hasAttribute("compression"))
eng->setCompression(attrf(a, "compression"));
+ if(a->hasAttribute("min-throttle"))
+ eng->setMinThrottle(attrf(a, "min-throttle"));
+
if(a->hasAttribute("turbo-mul")) {
float mul = attrf(a, "turbo-mul");
float mp = attrf(a, "wastegate-mp", 1e6) * INHG2PA;
eng->setTurboParams(mul, mp);
+ eng->setTurboLag(attrf(a, "turbo-lag", 2));
}
+ if(a->hasAttribute("supercharger"))
+ eng->setSupercharger(attrb(a, "supercharger"));
+
+ ((PropEngine*)_currObj)->setEngine(eng);
+}
+
+void FGFDM::parseTurbineEngine(XMLAttributes* a)
+{
+ float power = attrf(a, "eng-power") * HP2W;
+ float omega = attrf(a, "eng-rpm") * RPM2RAD;
+ float alt = attrf(a, "alt") * FT2M;
+ float flatRating = attrf(a, "flat-rating") * HP2W;
+ TurbineEngine* eng = new TurbineEngine(power, omega, alt, flatRating);
+
+ if(a->hasAttribute("n2-low-idle"))
+ eng->setN2Range(attrf(a, "n2-low-idle"), attrf(a, "n2-high-idle"),
+ attrf(a, "n2-max"));
+
+ // Nasty units conversion: lbs/hr per hp -> kg/s per watt
+ if(a->hasAttribute("bsfc"))
+ eng->setFuelConsumption(attrf(a, "bsfc") * (LBS2KG/(3600*HP2W)));
+
+ ((PropEngine*)_currObj)->setEngine(eng);
+}
+
+void FGFDM::parsePropeller(XMLAttributes* a)
+{
+ // Legacy Handling for the old engines syntax:
+ PistonEngine* eng = 0;
+ if(a->hasAttribute("eng-power")) {
+ SG_LOG(SG_FLIGHT,SG_ALERT, "WARNING: "
+ << "Legacy engine definition in YASim configuration file. "
+ << "Please fix.");
+ float engP = attrf(a, "eng-power") * HP2W;
+ float engS = attrf(a, "eng-rpm") * RPM2RAD;
+ eng = new PistonEngine(engP, engS);
+ if(a->hasAttribute("displacement"))
+ eng->setDisplacement(attrf(a, "displacement") * CIN2CM);
+ if(a->hasAttribute("compression"))
+ eng->setCompression(attrf(a, "compression"));
+ if(a->hasAttribute("turbo-mul")) {
+ float mul = attrf(a, "turbo-mul");
+ float mp = attrf(a, "wastegate-mp", 1e6) * INHG2PA;
+ eng->setTurboParams(mul, mp);
+ }
+ }
+
+ // Now parse the actual propeller definition:
+ float cg[3];
+ cg[0] = attrf(a, "x");
+ cg[1] = attrf(a, "y");
+ cg[2] = attrf(a, "z");
+ float mass = attrf(a, "mass") * LBS2KG;
+ float moment = attrf(a, "moment");
+ float radius = attrf(a, "radius");
+ float speed = attrf(a, "cruise-speed") * KTS2MPS;
+ float omega = attrf(a, "cruise-rpm") * RPM2RAD;
+ float power = attrf(a, "cruise-power") * HP2W;
+ float rho = Atmosphere::getStdDensity(attrf(a, "cruise-alt") * FT2M);
+
+ Propeller* prop = new Propeller(radius, speed, omega, rho, power);
+ PropEngine* thruster = new PropEngine(prop, eng, moment);
+ _airplane.addThruster(thruster, mass, cg);
+
+ // Set the stops (fine = minimum pitch, coarse = maximum pitch)
+ float fine_stop = attrf(a, "fine-stop", 0.25f);
+ float coarse_stop = attrf(a, "coarse-stop", 4.0f);
+ prop->setStops(fine_stop, coarse_stop);
+
if(a->hasAttribute("takeoff-power")) {
float power0 = attrf(a, "takeoff-power") * HP2W;
float omega0 = attrf(a, "takeoff-rpm") * RPM2RAD;
thruster->setVariableProp(min, max);
}
+ if(attrb(a, "contra"))
+ thruster->setContraPair(true);
+
if(a->hasAttribute("manual-pitch")) {
prop->setManualPitch();
}
+ thruster->setGearRatio(attrf(a, "gear-ratio", 1));
+
char buf[64];
sprintf(buf, "/engines/engine[%d]", _nextEngine++);
EngRec* er = new EngRec();
// Not there, make a new one.
AxisRec* a = new AxisRec();
a->name = dup(name);
+ fgGetNode( a->name, true ); // make sure the property name exists
a->handle = _airplane.getControlMap()->newInput();
_axes.add(a);
return a->handle;
{
if(eq(name, "THROTTLE")) return ControlMap::THROTTLE;
if(eq(name, "MIXTURE")) return ControlMap::MIXTURE;
+ if(eq(name, "CONDLEVER")) return ControlMap::CONDLEVER;
if(eq(name, "STARTER")) return ControlMap::STARTER;
if(eq(name, "MAGNETOS")) return ControlMap::MAGNETOS;
if(eq(name, "ADVANCE")) return ControlMap::ADVANCE;
if(eq(name, "BRAKE")) return ControlMap::BRAKE;
if(eq(name, "STEER")) return ControlMap::STEER;
if(eq(name, "EXTEND")) return ControlMap::EXTEND;
+ if(eq(name, "HEXTEND")) return ControlMap::HEXTEND;
+ if(eq(name, "LEXTEND")) return ControlMap::LEXTEND;
+ if(eq(name, "LACCEL")) return ControlMap::LACCEL;
if(eq(name, "INCIDENCE")) return ControlMap::INCIDENCE;
if(eq(name, "FLAP0")) return ControlMap::FLAP0;
+ if(eq(name, "FLAP0EFFECTIVENESS")) return ControlMap::FLAP0EFFECTIVENESS;
if(eq(name, "FLAP1")) return ControlMap::FLAP1;
+ if(eq(name, "FLAP1EFFECTIVENESS")) return ControlMap::FLAP1EFFECTIVENESS;
if(eq(name, "SLAT")) return ControlMap::SLAT;
if(eq(name, "SPOILER")) return ControlMap::SPOILER;
if(eq(name, "CASTERING")) return ControlMap::CASTERING;
if(eq(name, "PROPPITCH")) return ControlMap::PROPPITCH;
+ if(eq(name, "PROPFEATHER")) return ControlMap::PROPFEATHER;
+ if(eq(name, "COLLECTIVE")) return ControlMap::COLLECTIVE;
+ if(eq(name, "CYCLICAIL")) return ControlMap::CYCLICAIL;
+ if(eq(name, "CYCLICELE")) return ControlMap::CYCLICELE;
+ if(eq(name, "TILTROLL")) return ControlMap::TILTROLL;
+ if(eq(name, "TILTPITCH")) return ControlMap::TILTPITCH;
+ if(eq(name, "TILTYAW")) return ControlMap::TILTYAW;
+ if(eq(name, "ROTORGEARENGINEON")) return ControlMap::ROTORENGINEON;
+ if(eq(name, "ROTORBRAKE")) return ControlMap::ROTORBRAKE;
+ if(eq(name, "ROTORENGINEMAXRELTORQUE"))
+ return ControlMap::ROTORENGINEMAXRELTORQUE;
+ if(eq(name, "ROTORRELTARGET")) return ControlMap::ROTORRELTARGET;
+ if(eq(name, "ROTORBALANCE")) return ControlMap::ROTORBALANCE;
+ if(eq(name, "REVERSE_THRUST")) return ControlMap::REVERSE_THRUST;
+ if(eq(name, "WASTEGATE")) return ControlMap::WASTEGATE;
+ if(eq(name, "WINCHRELSPEED")) return ControlMap::WINCHRELSPEED;
+ if(eq(name, "HITCHOPEN")) return ControlMap::HITCHOPEN;
+ if(eq(name, "PLACEWINCH")) return ControlMap::PLACEWINCH;
+ if(eq(name, "FINDAITOW")) return ControlMap::FINDAITOW;
+
SG_LOG(SG_FLIGHT,SG_ALERT,"Unrecognized control type '"
<< name << "' in YASim aircraft description.");
exit(1);
return s2;
}
-int FGFDM::attri(XMLAttributes* atts, char* attr)
+int FGFDM::attri(XMLAttributes* atts, const char* attr)
{
if(!atts->hasAttribute(attr)) {
SG_LOG(SG_FLIGHT,SG_ALERT,"Missing '" << attr <<
return attri(atts, attr, 0);
}
-int FGFDM::attri(XMLAttributes* atts, char* attr, int def)
+int FGFDM::attri(XMLAttributes* atts, const char* attr, int def)
{
const char* val = atts->getValue(attr);
if(val == 0) return def;
else return atol(val);
}
-float FGFDM::attrf(XMLAttributes* atts, char* attr)
+float FGFDM::attrf(XMLAttributes* atts, const char* attr)
{
if(!atts->hasAttribute(attr)) {
SG_LOG(SG_FLIGHT,SG_ALERT,"Missing '" << attr <<
return attrf(atts, attr, 0);
}
-float FGFDM::attrf(XMLAttributes* atts, char* attr, float def)
+float FGFDM::attrf(XMLAttributes* atts, const char* attr, float def)
{
const char* val = atts->getValue(attr);
if(val == 0) return def;
else return (float)atof(val);
}
+double FGFDM::attrd(XMLAttributes* atts, const char* attr)
+{
+ if(!atts->hasAttribute(attr)) {
+ SG_LOG(SG_FLIGHT,SG_ALERT,"Missing '" << attr <<
+ "' in YASim aircraft description");
+ exit(1);
+ }
+ return attrd(atts, attr, 0);
+}
+
+double FGFDM::attrd(XMLAttributes* atts, const char* attr, double def)
+{
+ const char* val = atts->getValue(attr);
+ if(val == 0) return def;
+ else return atof(val);
+}
+
+// ACK: the dreaded ambiguous string boolean. Remind me to shoot Maik
+// when I have a chance. :). Unless you have a parser that can check
+// symbol constants (we don't), this kind of coding is just a Bad
+// Idea. This implementation, for example, silently returns a boolean
+// falsehood for values of "1", "yes", "True", and "TRUE". Which is
+// especially annoying preexisting boolean attributes in the same
+// parser want to see "1" and will choke on a "true"...
+//
+// Unfortunately, this usage creeped into existing configuration files
+// while I wasn't active, and it's going to be hard to remove. Issue
+// a warning to nag people into changing their ways for now...
+bool FGFDM::attrb(XMLAttributes* atts, const char* attr)
+{
+ const char* val = atts->getValue(attr);
+ if(val == 0) return false;
+
+ if(eq(val,"true")) {
+ SG_LOG(SG_FLIGHT, SG_ALERT, "Warning: " <<
+ "deprecated 'true' boolean in YASim configuration file. " <<
+ "Use numeric booleans (attribute=\"1\") instead");
+ return true;
+ }
+ return attri(atts, attr, 0) ? true : false;
+}
+
}; // namespace yasim