#include <Airports/runways.hxx>
#include <Navaids/navlist.hxx>
#include <Main/util.hxx>
+#include <Sound/morse.hxx>
using std::string;
_sgr = smgr->find("avionics", true);
_sgr->tie_to_listener();
- morse.init();
-
SGPropertyNode* node = _radio_node.get();
bus_power_node =
fgGetNode(("/systems/electrical/outputs/" + _name).c_str(), true);
SGVec3d pos = aircraft - _gsCart; // relative vector from gs antenna to aircraft
// The positive GS axis points along the runway in the landing direction,
// toward the far end, not toward the approach area, so we need a - sign here:
- double dot_h = -dot(pos, _gsAxis);
- double dot_v = dot(pos, _gsVertical);
- _gsDirect = atan2(dot_v, dot_h) * SGD_RADIANS_TO_DEGREES;
+ double comp_h = -dot(pos, _gsAxis); // component in horiz direction
+ double comp_v = dot(pos, _gsVertical); // component in vertical direction
+ //double comp_b = dot(pos, _gsBaseline); // component in baseline direction
+ //if (comp_b) {} // ... (useful for debugging)
+
+// _gsDirect represents the angle of elevation of the aircraft
+// as seen by the GS transmitter.
+ _gsDirect = atan2(comp_v, comp_h) * SGD_RADIANS_TO_DEGREES;
+// At this point, if the aircraft is centered on the glide slope,
+// _gsDirect will be a small positive number, e.g. 3.0 degrees
+
+// Aim the branch cut straight down
+// into the ground below the GS transmitter:
+ if (_gsDirect < -90.0) _gsDirect += 360.0;
+
double deflectionAngle = target_gs - _gsDirect;
if (falseCoursesEnabledNode->getBoolValue()) {
}
}
+// GS is documented to be 1.4 degrees thick,
+// i.e. plus or minus 0.7 degrees from the midline:
+ SG_CLAMP_RANGE(deflectionAngle, -0.7, 0.7);
+
+// Many older instrument xml frontends depend on
+// the un-normalized gs-needle-deflection.
+// Apparently the interface standard is plus or minus 3.5 "volts"
+// for a full-scale deflection:
_gsNeedleDeflection = deflectionAngle * 5.0;
_gsNeedleDeflection *= signal_quality_norm;
- SG_CLAMP_RANGE(deflectionAngle, -0.7, 0.7);
_gsNeedleDeflectionNorm = (deflectionAngle / 0.7) * signal_quality_norm;
//////////////////////////////////////////////////////////
}
last_time = now;
- play_count = ++play_count % NUM_IDENT_SLOTS;
+ play_count++;
+ play_count %= NUM_IDENT_SLOTS;
// Previous ident is out of time; if still playing, cut it off:
_sgr->stop( nav_fx_name );
_navaid = nav;
string identBuffer(4, ' ');
if (nav) {
- _dme = globals->get_dmelist()->findByFreq(freq, pos);
+ // use ILS signals as DME, otherwise search by frequency
+ if (nav->type()==FGPositioned::ILS)
+ _dme = nav;
+ else
+ _dme = globals->get_dmelist()->findByFreq(freq, pos);
nav_id_node->setStringValue(nav->get_ident());
identBuffer = simgear::strutils::rpad( nav->ident(), 4, ' ' );
_gsAxis = tangentVector(_gs->geod(), gs_radial);
// GS baseline unit tangent vector
- // (perpendicular to the runay along the ground)
- SGVec3d baseline = tangentVector(_gs->geod(), gs_radial + 90.0);
- _gsVertical = cross(baseline, _gsAxis);
+ // (transverse to the runay along the ground)
+ _gsBaseline = tangentVector(_gs->geod(), gs_radial + 90.0);
+ _gsVertical = cross(_gsBaseline, _gsAxis);
} // of have glideslope
} // of found LOC or ILS
try {
string trans_ident(_navaid->get_trans_ident());
- SGSoundSample* sound = morse.make_ident(trans_ident, LO_FREQUENCY);
+ SGSoundSample* sound = FGMorse::instance()->make_ident(trans_ident, LO_FREQUENCY);
sound->set_volume( 0.3 );
if (!_sgr->add( sound, nav_fx_name )) {
SG_LOG(SG_COCKPIT, SG_WARN, "Failed to add v1-vor-ident sound");
_sgr->remove( dme_fx_name );
}
- sound = morse.make_ident( trans_ident, HI_FREQUENCY );
+ sound = FGMorse::instance()->make_ident( trans_ident, HI_FREQUENCY );
sound->set_volume( 0.3 );
_sgr->add( sound, dme_fx_name );