#include "fg_props.hxx"
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
#include <simgear/debug/logstream.hxx>
#include <simgear/constants.h>
-#include <simgear/math/polar3d.hxx>
-#include <simgear/math/sg_geodesy.hxx>
-#include <simgear/scene/model/location.hxx>
#include <simgear/scene/model/placement.hxx>
#include <simgear/math/vector.hxx>
double target_x_offset_m, double target_y_offset_m,
double target_z_offset_m, double near_m, bool internal ):
_dirty(true),
- _lon_deg(0),
- _lat_deg(0),
- _alt_ft(0),
- _target_lon_deg(0),
- _target_lat_deg(0),
- _target_alt_ft(0),
_roll_deg(0),
_pitch_deg(0),
_heading_deg(0),
_damp_pitch(0),
_damp_heading(0),
_scaling_type(FG_SCALING_MAX),
- _location(0),
- _target_location(0),
+ _aspect_ratio(0),
_cameraGroup(CameraGroup::getDefault())
{
_absolute_view_pos = SGVec3d(0, 0, 0);
} else {
_fov_deg = 55;
}
+ _aspect_ratio = 1;
_aspect_ratio_multiplier = aspect_ratio_multiplier;
_target_offset_m.x() = target_x_offset_m;
_target_offset_m.y() = target_y_offset_m;
void
FGViewer::init ()
{
- if ( _from_model )
- _location = (SGLocation *) globals->get_aircraft_model()->get3DModel()->getSGLocation();
- else
- _location = new SGLocation;
-
- if ( _type == FG_LOOKAT ) {
- if ( _at_model )
- _target_location = (SGLocation *) globals->get_aircraft_model()->get3DModel()->getSGLocation();
- else
- _target_location = (SGLocation *) new SGLocation;
- }
}
void
_internal = internal;
}
-void
-FGViewer::setLongitude_deg (double lon_deg)
-{
- _dirty = true;
- _lon_deg = lon_deg;
-}
-
-void
-FGViewer::setLatitude_deg (double lat_deg)
-{
- _dirty = true;
- _lat_deg = lat_deg;
-}
-
-void
-FGViewer::setAltitude_ft (double alt_ft)
-{
- _dirty = true;
- _alt_ft = alt_ft;
-}
-
void
FGViewer::setPosition (double lon_deg, double lat_deg, double alt_ft)
{
_dirty = true;
- _lon_deg = lon_deg;
- _lat_deg = lat_deg;
- _alt_ft = alt_ft;
-}
-
-void
-FGViewer::setTargetLongitude_deg (double lon_deg)
-{
- _dirty = true;
- _target_lon_deg = lon_deg;
-}
-
-void
-FGViewer::setTargetLatitude_deg (double lat_deg)
-{
- _dirty = true;
- _target_lat_deg = lat_deg;
-}
-
-void
-FGViewer::setTargetAltitude_ft (double alt_ft)
-{
- _dirty = true;
- _target_alt_ft = alt_ft;
+ _position = SGGeod::fromDegFt(lon_deg, lat_deg, alt_ft);
}
void
FGViewer::setTargetPosition (double lon_deg, double lat_deg, double alt_ft)
{
_dirty = true;
- _target_lon_deg = lon_deg;
- _target_lat_deg = lat_deg;
- _target_alt_ft = alt_ft;
+ _target = SGGeod::fromDegFt(lon_deg, lat_deg, alt_ft);
}
void
recalcLookAt();
}
- SGGeod geodEyePoint = SGGeod::fromCart(_absolute_view_pos);
- geodEyePoint.setElevationM(0);
- _zero_elev = SGVec3d::fromGeod(geodEyePoint);
-
- SGQuatd hlOr = SGQuatd::fromLonLat(geodEyePoint);
- _surface_south = toVec3f(hlOr.backTransform(-SGVec3d::e1()));
- _surface_east = toVec3f(hlOr.backTransform(SGVec3d::e2()));
- _world_up = toVec3f(hlOr.backTransform(-SGVec3d::e3()));
-
- // Update viewer's postion data for the eye location...
- _lon_deg = _location->getLongitude_deg();
- _lat_deg = _location->getLatitude_deg();
- _alt_ft = _location->getAltitudeASL_ft();
- _roll_deg = _location->getRoll_deg();
- _pitch_deg = _location->getPitch_deg();
- _heading_deg = _location->getHeading_deg();
-
- // Update viewer's postion data for the target (at object) location
- if (_type == FG_LOOKAT) {
- _target_lon_deg = _target_location->getLongitude_deg();
- _target_lat_deg = _target_location->getLatitude_deg();
- _target_alt_ft = _target_location->getAltitudeASL_ft();
- _target_roll_deg = _target_location->getRoll_deg();
- _target_pitch_deg = _target_location->getPitch_deg();
- _target_heading_deg = _target_location->getHeading_deg();
- }
-
set_clean();
}
FGViewer::recalcLookFrom ()
{
// Update location data ...
- if ( !_from_model ) {
- _location->setPosition( _lon_deg, _lat_deg, _alt_ft );
- _location->setOrientation( _roll_deg, _pitch_deg, _heading_deg );
- _location->getTransformMatrix();
+ if ( _from_model ) {
+ SGModelPlacement* placement = globals->get_aircraft_model()->get3DModel();
+ _position = placement->getPosition();
+
+ _heading_deg = placement->getHeadingDeg();
+ _pitch_deg = placement->getPitchDeg();
+ _roll_deg = placement->getRollDeg();
}
- double lat = _location->getLatitude_deg();
- double lon = _location->getLongitude_deg();
- double alt = _location->getAltitudeASL_ft();
- double head = _location->getHeading_deg();
- double pitch = _location->getPitch_deg();
- double roll = _location->getRoll_deg();
+
+ double head = _heading_deg;
+ double pitch = _pitch_deg;
+ double roll = _roll_deg;
if ( !_from_model ) {
// update from our own data...
dampEyeData(roll, pitch, head);
}
- // The geodetic position of our base view position
- SGGeod geodPos = SGGeod::fromDegFt(lon, lat, alt);
// The rotation rotating from the earth centerd frame to
- // the horizontal local OpenGL frame
- SGQuatd hlOr = SGQuatd::viewHL(geodPos);
+ // the horizontal local frame
+ SGQuatd hlOr = SGQuatd::fromLonLat(_position);
- // the rotation from the horizontal local frame to the basic view orientation
+ // The rotation from the horizontal local frame to the basic view orientation
SGQuatd hlToBody = SGQuatd::fromYawPitchRollDeg(head, pitch, roll);
- hlToBody = SGQuatd::simToView(hlToBody);
- // The cartesian position of the basic view coordinate
- SGVec3d position = SGVec3d::fromGeod(geodPos);
- // the rotation offset, don't know why heading is negative here ...
- SGQuatd viewOffsetOr = SGQuatd::simToView(
- SGQuatd::fromYawPitchRollDeg(-_heading_offset_deg, _pitch_offset_deg,
- _roll_offset_deg));
+ // The rotation offset, don't know why heading is negative here ...
+ mViewOffsetOr
+ = SGQuatd::fromYawPitchRollDeg(-_heading_offset_deg, _pitch_offset_deg,
+ _roll_offset_deg);
// Compute the eyepoints orientation and position
// wrt the earth centered frame - that is global coorinates
SGQuatd ec2body = hlOr*hlToBody;
- _absolute_view_pos = position + ec2body.backTransform(_offset_m);
- mViewOrientation = ec2body*viewOffsetOr;
+
+ // The cartesian position of the basic view coordinate
+ SGVec3d position = SGVec3d::fromGeod(_position);
+
+ // This is rotates the x-forward, y-right, z-down coordinate system the where
+ // simulation runs into the OpenGL camera system with x-right, y-up, z-back.
+ SGQuatd q(-0.5, -0.5, 0.5, 0.5);
+
+ _absolute_view_pos = position + (ec2body*q).backTransform(_offset_m);
+ mViewOrientation = ec2body*mViewOffsetOr*q;
}
void
FGViewer::recalcLookAt ()
{
// The geodetic position of our target to look at
- SGGeod geodTargetPos;
- SGQuatd geodTargetOr;
if ( _at_model ) {
- geodTargetPos = SGGeod::fromDegFt(_target_location->getLongitude_deg(),
- _target_location->getLatitude_deg(),
- _target_location->getAltitudeASL_ft());
- double head = _target_location->getHeading_deg();
- double pitch = _target_location->getPitch_deg();
- double roll = _target_location->getRoll_deg();
- geodTargetOr = SGQuatd::fromYawPitchRollDeg(head, pitch, roll);
+ SGModelPlacement* placement = globals->get_aircraft_model()->get3DModel();
+ _target = placement->getPosition();
+ _target_heading_deg = placement->getHeadingDeg();
+ _target_pitch_deg = placement->getPitchDeg();
+ _target_roll_deg = placement->getRollDeg();
} else {
+ // if not model then calculate our own target position...
dampEyeData(_target_roll_deg, _target_pitch_deg, _target_heading_deg);
- _target_location->setPosition( _target_lon_deg, _target_lat_deg, _target_alt_ft );
- _target_location->setOrientation( _target_roll_deg, _target_pitch_deg, _target_heading_deg );
- _target_location->getTransformMatrix();
- // if not model then calculate our own target position...
- geodTargetPos = SGGeod::fromDegFt(_target_lon_deg,
- _target_lat_deg,
- _target_alt_ft);
- geodTargetOr = SGQuatd::fromYawPitchRollDeg(_target_heading_deg,
- _target_pitch_deg,
- _target_roll_deg);
}
- SGQuatd geodTargetHlOr = SGQuatd::fromLonLat(geodTargetPos);
+
+ SGQuatd geodTargetOr = SGQuatd::fromYawPitchRollDeg(_target_heading_deg,
+ _target_pitch_deg,
+ _target_roll_deg);
+ SGQuatd geodTargetHlOr = SGQuatd::fromLonLat(_target);
- SGGeod geodEyePos;
- SGQuatd geodEyeOr;
if ( _from_model ) {
- geodEyePos = SGGeod::fromDegFt(_location->getLongitude_deg(),
- _location->getLatitude_deg(),
- _location->getAltitudeASL_ft());
- double head = _location->getHeading_deg();
- double pitch = _location->getPitch_deg();
- double roll = _location->getRoll_deg();
- geodEyeOr = SGQuatd::fromYawPitchRollDeg(head, pitch, roll);
+ SGModelPlacement* placement = globals->get_aircraft_model()->get3DModel();
+ _position = placement->getPosition();
+ _heading_deg = placement->getHeadingDeg();
+ _pitch_deg = placement->getPitchDeg();
+ _roll_deg = placement->getRollDeg();
} else {
- dampEyeData(_roll_deg, _pitch_deg, _heading_deg);
- _location->setPosition( _lon_deg, _lat_deg, _alt_ft );
- _location->setOrientation( _roll_deg, _pitch_deg, _heading_deg );
- _location->getTransformMatrix();
-
// update from our own data, just the rotation here...
- geodEyePos = SGGeod::fromDegFt(_lon_deg, _lat_deg, _alt_ft);
- geodEyeOr = SGQuatd::fromYawPitchRollDeg(_heading_deg,
- _pitch_deg,
- _roll_deg);
+ dampEyeData(_roll_deg, _pitch_deg, _heading_deg);
}
- SGQuatd geodEyeHlOr = SGQuatd::fromLonLat(geodEyePos);
+ SGQuatd geodEyeOr = SGQuatd::fromYawPitchRollDeg(_heading_deg,
+ _pitch_deg,
+ _roll_deg);
+ SGQuatd geodEyeHlOr = SGQuatd::fromLonLat(_position);
// the rotation offset, don't know why heading is negative here ...
- SGQuatd eyeOffsetOr =
+ mViewOffsetOr =
SGQuatd::fromYawPitchRollDeg(-_heading_offset_deg + 180, _pitch_offset_deg,
_roll_offset_deg);
// Offsets to the eye position
SGVec3d eyeOff(-_offset_m.z(), _offset_m.x(), -_offset_m.y());
SGQuatd ec2eye = geodEyeHlOr*geodEyeOr;
- SGVec3d eyeCart = SGVec3d::fromGeod(geodEyePos);
- eyeCart += (ec2eye*eyeOffsetOr).backTransform(eyeOff);
+ SGVec3d eyeCart = SGVec3d::fromGeod(_position);
+ eyeCart += (ec2eye*mViewOffsetOr).backTransform(eyeOff);
- SGVec3d atCart = SGVec3d::fromGeod(geodTargetPos);
+ SGVec3d atCart = SGVec3d::fromGeod(_target);
// add target offsets to at_position...
SGVec3d target_pos_off(-_target_offset_m.z(), _target_offset_m.x(),
SGVec3d dir = normalize(atCart - eyeCart);
// the up directon
SGVec3d up = ec2eye.backTransform(SGVec3d(0, 0, -1));
- // rotate dir to the 0-th unit vector
- // rotate up to 2-th unit vector
+ // rotate -dir to the 2-th unit vector
+ // rotate up to 1-th unit vector
+ // Note that this matches the OpenGL camera coordinate system
+ // with x-right, y-up, z-back.
mViewOrientation = SGQuatd::fromRotateTo(-dir, 2, up, 1);
}
}
}
recalc();
- _cameraGroup->update(_absolute_view_pos.osg(), mViewOrientation.osg());
+ _cameraGroup->update(toOsg(_absolute_view_pos), toOsg(mViewOrientation));
_cameraGroup->setCameraParameters(get_v_fov(), get_aspect_ratio());
}