X-Git-Url: https://git.mxchange.org/?a=blobdiff_plain;ds=sidebyside;f=inc%2Ffunctions.php;h=dfb97948c143dcf9be5d588338e96ce9287e0791;hb=255696fe065d35b951f66168c35296b10fdde060;hp=6848f87e4f82bebf81ecbb52f3f89f2376592436;hpb=d80db791f0516fb24f7aa0a837917bb6d70f890a;p=mailer.git
diff --git a/inc/functions.php b/inc/functions.php
index 6848f87e4f..dfb97948c1 100644
--- a/inc/functions.php
+++ b/inc/functions.php
@@ -1,7 +1,7 @@
{--FATAL_ERROR--}: {--LANG_NO_RENDER_DIRECT--}');
- break;
- } // END - switch
- } elseif ((getPhpCaching() == 'on') && (isset($GLOBALS['footer_sent'])) && ($GLOBALS['footer_sent'] == 1)) {
- // Headers already sent?
- if (headers_sent()) {
- // Log this error
- logDebugMessage(__FUNCTION__, __LINE__, 'Headers already sent! We need debug backtrace here.');
-
- // Trigger an user error
- debug_report_bug('Headers are already sent!');
- } // END - if
-
- // Output cached HTML code
- $GLOBALS['output'] = ob_get_contents();
-
- // Clear output buffer for later output if output is found
- if (!empty($GLOBALS['output'])) {
- clearOutputBuffer();
- } // END - if
-
- // Send HTTP header
- sendHeader('HTTP/1.1 200');
-
- // Used later
- $now = gmdate('D, d M Y H:i:s') . ' GMT';
-
- // General headers for no caching
- sendHeader('Expired: ' . $now); // RFC2616 - Section 14.21
- sendHeader('Last-Modified: ' . $now);
- sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
- sendHeader('Pragma: no-cache'); // HTTP/1.0
- sendHeader('Connection: Close');
- sendHeader('Content-Type: ' . getContentType() . '; charset=UTF-8');
- sendHeader('Content-language: ' . getLanguage());
-
- // Extension 'rewrite' installed?
- if ((isExtensionActive('rewrite')) && (getOutputMode() != 1)) {
- $GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
- } // END - if
-
- // Init counter
- $cnt = 0;
-
- // Compile and run finished rendered HTML code
- while (((strpos($GLOBALS['output'], '{--') > 0) || (strpos($GLOBALS['output'], '{!') > 0) || (strpos($GLOBALS['output'], '{?') > 0)) && ($cnt < 3)) {
- // Prepare the content and eval() it...
- $content = array();
- $newContent = '';
-
- // Compile it
- $eval = "\$newContent = \"".compileCode(smartAddSlashes($GLOBALS['output']))."\";";
- eval($eval);
-
- // Was that eval okay?
- if (empty($newContent)) {
- // Something went wrong!
- debug_report_bug('Evaluation error:
' . linenumberCode($eval) . '
');
- } // END - if
- $GLOBALS['output'] = $newContent;
-
- // Count round
- $cnt++;
- } // END - while
-
- // Output code here, DO NOT REMOVE! ;-)
- outputRawCode($GLOBALS['output']);
- } elseif ((getConfig('OUTPUT_MODE') == 'render') && (!empty($GLOBALS['output']))) {
- // Rewrite links when rewrite extension is active
- if ((isExtensionActive('rewrite')) && (getOutputMode() != 1)) {
- $GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
- } // END - if
+// Sends out all headers required for HTTP/1.1 reply
+function sendHttpHeaders () {
+ // Used later
+ $now = gmdate('D, d M Y H:i:s') . ' GMT';
- // Compile and run finished rendered HTML code
- while (strpos($GLOBALS['output'], '{!') > 0) {
- eval("\$GLOBALS['output'] = \"".compileCode(smartAddSlashes($GLOBALS['output']))."\";");
- } // END - while
+ // Send HTTP header
+ sendHeader('HTTP/1.1 ' . getHttpStatus());
- // Output code here, DO NOT REMOVE! ;-)
- outputRawCode($GLOBALS['output']);
- }
-}
-
-// Output the raw HTML code
-function outputRawCode ($htmlCode) {
- // Output stripped HTML code to avoid broken JavaScript code, etc.
- print(stripslashes(stripslashes($htmlCode)));
-
- // Flush the output if only getPhpCaching() is not 'on'
- if (getPhpCaching() != 'on') {
- // Flush it
- flush();
- } // END - if
+ // General headers for no caching
+ sendHeader('Expires: ' . $now); // RFC2616 - Section 14.21
+ sendHeader('Last-Modified: ' . $now);
+ sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
+ sendHeader('Pragma: no-cache'); // HTTP/1.0
+ sendHeader('Connection: Close');
+ sendHeader('Content-Type: ' . getContentType() . '; charset=UTF-8');
+ sendHeader('Content-Language: ' . getLanguage());
}
// Init fatal message array
@@ -185,7 +71,7 @@ function getFatalArray () {
}
// Add a fatal error message to the queue array
-function addFatalMessage ($F, $L, $message, $extra='') {
+function addFatalMessage ($F, $L, $message, $extra = '') {
if (is_array($extra)) {
// Multiple extras for a message with masks
$message = call_user_func_array('sprintf', $extra);
@@ -198,14 +84,13 @@ function addFatalMessage ($F, $L, $message, $extra='') {
$GLOBALS['fatal_messages'][] = $message;
// Log fatal messages away
- debug_report_bug($message);
- logDebugMessage($F, $L, " message={$message}");
+ logDebugMessage($F, $L, 'Fatal error message: ' . $message);
}
// Getter for total fatal message count
function getTotalFatalErrors () {
- // Init coun
- $count = 0;
+ // Init count
+ $count = '0';
// Do we have at least the first entry?
if (!empty($GLOBALS['fatal_messages'][0])) {
@@ -217,328 +102,12 @@ function getTotalFatalErrors () {
return $count;
}
-// Load a template file and return it's content (only it's name; do not use ' or ")
-function loadTemplate ($template, $return=false, $content=array()) {
- // @TODO Remove this sanity-check if all is fine
- if (!is_bool($return)) debug_report_bug('return is not bool (' . gettype($return) . ')');
-
- // @TODO Try to rewrite all $DATA to $content
- global $DATA;
-
- // Do we have cache?
- if (isTemplateCached($template)) {
- // Evaluate the cache
- eval(readTemplateCache($template));
- } elseif (!isset($GLOBALS['template_eval'][$template])) {
- // Add more variables which you want to use in your template files
- $username = getUsername();
-
- // Make all template names lowercase
- $template = strtolower($template);
-
- // Count the template load
- incrementConfigEntry('num_templates');
-
- // Init some data
- $ret = '';
- if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = 0;
-
- // Base directory
- $basePath = sprintf("%stemplates/%s/html/", getConfig('PATH'), getLanguage());
- $mode = '';
-
- // Check for admin/guest/member templates
- if (substr($template, 0, 6) == 'admin_') {
- // Admin template found
- $mode = 'admin/';
- } elseif (substr($template, 0, 6) == 'guest_') {
- // Guest template found
- $mode = 'guest/';
- } elseif (substr($template, 0, 7) == 'member_') {
- // Member template found
- $mode = 'member/';
- } elseif (substr($template, 0, 8) == 'install_') {
- // Installation template found
- $mode = 'install/';
- } elseif (substr($template, 0, 4) == 'ext_') {
- // Extension template found
- $mode = 'ext/';
- } elseif (substr($template, 0, 3) == 'la_') {
- // 'Logical-area' template found
- $mode = 'la/';
- } elseif (substr($template, 0, 3) == 'js_') {
- // JavaScript template found
- $mode = 'js/';
- } elseif (substr($template, 0, 5) == 'menu_') {
- // Menu template found
- $mode = 'menu/';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
-
- // Probe for valid extension name
- if (isExtensionNameValid($test)) {
- // Set extra path to extension's name
- $mode = $test . '/';
- } // END - if
- }
-
- ////////////////////////
- // Generate file name //
- ////////////////////////
- $FQFN = $basePath . $mode . $template . '.tpl';
-
- if ((isWhatSet()) && ((strpos($template, '_header') > 0) || (strpos($template, '_footer') > 0)) && (($mode == 'guest/') || ($mode == 'member/') || ($mode == 'admin/'))) {
- // Select what depended header/footer template file for admin/guest/member area
- $file2 = sprintf("%s%s%s_%s.tpl",
- $basePath,
- $mode,
- $template,
- getWhat()
- );
-
- // Probe for it...
- if (isFileReadable($file2)) $FQFN = $file2;
-
- // Remove variable from memory
- unset($file2);
- } // END - if
-
- // Does the special template exists?
- if (!isFileReadable($FQFN)) {
- // Reset to default template
- $FQFN = $basePath . $template . '.tpl';
- } // END - if
-
- // Now does the final template exists?
- if (isFileReadable($FQFN)) {
- // The local file does exists so we load it. :)
- $GLOBALS['tpl_content'] = readFromFile($FQFN);
-
- // Replace ' to our own chars to preventing them being quoted
- while (strpos($GLOBALS['tpl_content'], "'") !== false) { $GLOBALS['tpl_content'] = str_replace("'", '{QUOT}', $GLOBALS['tpl_content']); }
-
- // Do we have to compile the code?
- $ret = '';
- if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{!') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false)) {
- // Normal HTML output?
- if (getOutputMode() == 0) {
- // Add surrounding HTML comments to help finding bugs faster
- $ret = "\n" . $GLOBALS['tpl_content'] . "\n";
-
- // Prepare eval() command
- $eval = '$ret = "' . compileCode(smartAddSlashes($ret)) . '";';
- } else {
- // Prepare eval() command
- $eval = '$ret = "' . compileCode(smartAddSlashes($GLOBALS['tpl_content'])) . '";';
- }
- } else {
- // Add surrounding HTML comments to help finding bugs faster
- $ret = "\n" . $GLOBALS['tpl_content'] . "\n";
- $eval = '$ret = "' . smartAddSlashes($ret) . '";';
- } // END - if
-
- // Cache the eval() command here
- $GLOBALS['template_eval'][$template] = $eval;
-
- // Eval the code
- eval($GLOBALS['template_eval'][$template]);
- } else {
- // No file!
- $GLOBALS['template_eval'][$template] = '404';
- }
- } elseif (((isAdmin()) || ((isInstalling()) && (!isInstalled()))) && ($GLOBALS['template_eval'][$template] == '404')) {
- // Only admins shall see this warning or when installation mode is active
- $ret = '
{--TEMPLATE_404--}
-(' . $template . ')
-
-{--TEMPLATE_CONTENT--}
-' . print_r($content, true) . '
-{--TEMPLATE_DATA--}
-' . print_r($DATA, true) . '
-
\";';
- } else {
- // Eval the code
- eval($GLOBALS['template_eval'][$template]);
- }
-
- // Do we have some content to output or return?
- if (!empty($ret)) {
- // Not empty so let's put it out! ;)
- if ($return === true) {
- // Return the HTML code
- return $ret;
- } else {
- // Output direct
- outputHtml($ret);
- }
- } elseif (isDebugModeEnabled()) {
- // Warning, empty output!
- return 'E:' . $template . ',content=' . print_r($content, true) . '
';
- }
-}
-
-// Loads an email template and compiles it
-function loadEmailTemplate ($template, $content = array(), $UID = 0) {
- global $DATA;
-
- // Make sure all template names are lowercase!
- $template = strtolower($template);
-
- // Default 'nickname' if extension is not installed
- $nick = '---';
-
- // Prepare IP number and User Agent
- $REMOTE_ADDR = detectRemoteAddr();
- $HTTP_USER_AGENT = detectUserAgent();
-
- // Default admin
- $ADMIN = getConfig('MAIN_TITLE');
-
- // Is the admin logged in?
- if (isAdmin()) {
- // Get admin id
- $adminId = getCurrentAdminId();
-
- // Load Admin data
- $ADMIN = getAdminEmail($adminId);
- } // END - if
-
- // Neutral email address is default
- $email = getConfig('WEBMASTER');
-
- // Expiration in a nice output format
- // NOTE: Use $content[expiration] in your templates instead of $EXPIRATION
- if (getConfig('auto_purge') == 0) {
- // Will never expire!
- $EXPIRATION = getMessage('MAIL_WILL_NEVER_EXPIRE');
- } else {
- // Create nice date string
- $EXPIRATION = createFancyTime(getConfig('auto_purge'));
- }
-
- // Is content an array?
- if (is_array($content)) {
- // Add expiration to array, $EXPIRATION is now deprecated!
- $content['expiration'] = $EXPIRATION;
- } // END - if
-
- // Load user's data
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):UID={$UID},template={$template},content[]=".gettype($content).'
');
- if (($UID > 0) && (is_array($content))) {
- // If nickname extension is installed, fetch nickname as well
- if (isNicknameUsed($UID)) {
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):NICKNAME!
");
- // Load by nickname
- fetchUserData($UID, 'nickname');
- } else {
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):NO-NICK!
");
- /// Load by userid
- fetchUserData($UID);
- }
-
- // Merge data if valid
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):content()=".count($content)." - PRE
");
- if (isUserDataValid()) {
- $content = merge_array($content, getUserDataArray());
- } // END - if
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):content()=".count($content)." - AFTER
");
- } // END - if
-
- // Translate M to male or F to female if present
- if (isset($content['gender'])) $content['gender'] = translateGender($content['gender']);
-
- // Overwrite email from data if present
- if (isset($content['email'])) $email = $content['email'];
-
- // Store email for some functions in global data array
- $DATA['email'] = $email;
-
- // Base directory
- $basePath = sprintf("%stemplates/%s/emails/", getConfig('PATH'), getLanguage());
-
- // Check for admin/guest/member templates
- if (substr($template, 0, 6) == 'admin_') {
- // Admin template found
- $FQFN = $basePath.'admin/' . $template.'.tpl';
- } elseif (substr($template, 0, 6) == 'guest_') {
- // Guest template found
- $FQFN = $basePath.'guest/' . $template.'.tpl';
- } elseif (substr($template, 0, 7) == 'member_') {
- // Member template found
- $FQFN = $basePath.'member/' . $template.'.tpl';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
- if (isExtensionNameValid($test)) {
- // Set extra path to extension's name
- $FQFN = $basePath . $test.'/' . $template.'.tpl';
- } else {
- // No special filename
- $FQFN = $basePath . $template.'.tpl';
- }
- }
-
- // Does the special template exists?
- if (!isFileReadable($FQFN)) {
- // Reset to default template
- $FQFN = $basePath . $template.'.tpl';
- } // END - if
-
- // Now does the final template exists?
- $newContent = '';
- if (isFileReadable($FQFN)) {
- // The local file does exists so we load it. :)
- $GLOBALS['tpl_content'] = readFromFile($FQFN);
-
- // Run code
- $GLOBALS['tpl_content'] = "\$newContent = decodeEntities(\"".compileCode(smartAddSlashes($GLOBALS['tpl_content']))."\");";
- eval($GLOBALS['tpl_content']);
- } elseif (!empty($template)) {
- // Template file not found!
- $newContent = "{--TEMPLATE_404--}: " . $template."
-{--TEMPLATE_CONTENT--}
-".print_r($content, true)."
-{--TEMPLATE_DATA--}
-".print_r($DATA, true)."
-
";
-
- // Debug mode not active? Then remove the HTML tags
- if (!isDebugModeEnabled()) $newContent = secureString($newContent);
- } else {
- // No template name supplied!
- $newContent = getMessage('NO_TEMPLATE_SUPPLIED');
- }
-
- // Is there some content?
- if (empty($newContent)) {
- // Compiling failed
- $newContent = "Compiler error for template {$template}!\nUncompiled content:\n" . $GLOBALS['tpl_content'];
- // Add last error if the required function exists
- if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx.";
- } // END - if
-
- // Remove content and data
- unset($content);
- unset($DATA);
-
- // Compile the code and eval it
- $eval = '$newContent = "' . compileRawCode(smartAddSlashes($newContent)) . '";';
- eval($eval);
-
- // Return content
- return $newContent;
-}
-
// Send mail out to an email address
function sendEmail ($toEmail, $subject, $message, $isHtml = 'N', $mailHeader = '') {
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):TO={$toEmail},SUBJECT={$subject}
");
-
- // Compile subject line (for POINTS constant etc.)
- eval("\$subject = decodeEntities(\"".compileRawCode(smartAddSlashes($subject))."\");");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'toEmail=' . $toEmail . ',subject=' . $subject . ',isHtml=' . $isHtml);
// Set from header
- if ((!eregi('@', $toEmail)) && ($toEmail > 0)) {
+ if ((!isInStringIgnoreCase('@', $toEmail)) && ($toEmail > 0)) {
// Value detected, is the message extension installed?
// @TODO Extension 'msg' does not exist
if (isExtensionActive('msg')) {
@@ -558,57 +127,57 @@ function sendEmail ($toEmail, $subject, $message, $isHtml = 'N', $mailHeader = '
// Is the webmaster!
$toEmail = getConfig('WEBMASTER');
}
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):TO={$toEmail}
");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail}
");
// Check for PHPMailer or debug-mode
- if (!checkPhpMailerUsage()) {
+ if ((!checkPhpMailerUsage()) || (isDebugModeEnabled())) {
+ // Prefix is '' for text mails
+ $prefix = '';
+
+ // Is HTML?
+ if ($isHtml == 'Y') {
+ // Set prefix
+ $prefix = 'html_';
+ } // END - if
+
// Not in PHPMailer-Mode
if (empty($mailHeader)) {
// Load email header template
- $mailHeader = loadEmailTemplate('header');
- } else {
- // Append header
- $mailHeader .= loadEmailTemplate('header');
- }
- } elseif (isDebugModeEnabled()) {
- if (empty($mailHeader)) {
- // Load email header template
- $mailHeader = loadEmailTemplate('header');
+ $mailHeader = loadEmailTemplate($prefix . 'header');
} else {
// Append header
- $mailHeader .= loadEmailTemplate('header');
+ $mailHeader .= loadEmailTemplate($prefix . 'header');
}
- }
-
- // Compile "TO"
- eval("\$toEmail = \"".compileRawCode(smartAddSlashes($toEmail))."\";");
-
- // Compile "MSG"
- eval("\$message = \"".compileRawCode(smartAddSlashes($message))."\";");
+ } // END - if
// Fix HTML parameter (default is no!)
if (empty($isHtml)) $isHtml = 'N';
+
+ // Debug mode enabled?
if (isDebugModeEnabled()) {
// In debug mode we want to display the mail instead of sending it away so we can debug this part
outputHtml('
-Headers : ' . str_replace('<', '<', str_replace('>', '>', htmlentities(trim($mailHeader)))) . '
-To : ' . $toEmail . '
-Subject : ' . $subject . '
-Message : ' . $message . '
+Headers : ' . htmlentities(utf8_decode(trim($mailHeader))) . '
+To : ' . htmlentities(utf8_decode($toEmail)) . '
+Subject : ' . htmlentities(utf8_decode($subject)) . '
+Message : ' . htmlentities(utf8_decode($message)) . '
');
- } elseif (($isHtml == 'Y') && (isExtensionActive('html_mail'))) {
- // Send mail as HTML away
- sendHtmlEmail($toEmail, $subject, $message, $mailHeader);
+
+ // This is always fine
+ return true;
} elseif (!empty($toEmail)) {
// Send Mail away
- sendRawEmail($toEmail, $subject, $message, $mailHeader);
+ return sendRawEmail($toEmail, $subject, $message, $mailHeader);
} elseif ($isHtml != 'Y') {
// Problem found!
- sendRawEmail(getConfig('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader);
+ return sendRawEmail(getConfig('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader);
}
+
+ // Why did we end up here? This should not happen
+ debug_report_bug(__FUNCTION__, __LINE__, 'Ending up: template=' . $template);
}
-// Check if legacy or PHPMailer command
+// Check to use wether legacy mail() command or PHPMailer class
// @TODO Rewrite this to an extension 'smtp'
// @private
function checkPhpMailerUsage() {
@@ -616,7 +185,18 @@ function checkPhpMailerUsage() {
}
// Send out a raw email with PHPMailer class or legacy mail() command
-function sendRawEmail ($toEmail, $subject, $message, $from) {
+function sendRawEmail ($toEmail, $subject, $message, $headers) {
+ // Just compile all to put out all configs, etc.
+ $eval = '$toEmail = decodeEntities("' . escapeQuotes(doFinalCompilation(compileRawCode($toEmail), false)) . '"); ';
+ $eval .= '$subject = decodeEntities("' . escapeQuotes(doFinalCompilation(compileRawCode($subject), false)) . '"); ';
+ $eval .= '$headers = decodeEntities("' . escapeQuotes(doFinalCompilation(compileRawCode($headers), false)) . '"); ';
+
+ // Do not decode entities in the message because we also send HTML mails through this function
+ $eval .= '$message = "' . escapeQuotes(doFinalCompilation(compileRawCode($message), false)) . '";';
+
+ // Run the final eval() command
+ eval($eval);
+
// Shall we use PHPMailer class or legacy mode?
if (checkPhpMailerUsage()) {
// Use PHPMailer class with SMTP enabled
@@ -627,10 +207,10 @@ function sendRawEmail ($toEmail, $subject, $message, $from) {
$mail = new PHPMailer();
// Set charset to UTF-8
- $mail->CharSet('UTF-8');
+ $mail->CharSet = 'UTF-8';
// Path for PHPMailer
- $mail->PluginDir = sprintf("%sinc/phpmailer/", getConfig('PATH'));
+ $mail->PluginDir = sprintf("%sinc/phpmailer/", getPath());
$mail->IsSMTP();
$mail->SMTPAuth = true;
@@ -638,12 +218,12 @@ function sendRawEmail ($toEmail, $subject, $message, $from) {
$mail->Port = 25;
$mail->Username = getConfig('SMTP_USER');
$mail->Password = getConfig('SMTP_PASSWORD');
- if (empty($from)) {
+ if (empty($headers)) {
$mail->From = getConfig('WEBMASTER');
} else {
- $mail->From = $from;
+ $mail->From = $headers;
}
- $mail->FromName = getConfig('MAIN_TITLE');
+ $mail->FromName = getMainTitle();
$mail->Subject = $subject;
if ((isExtensionActive('html_mail')) && (secureString($message) != $message)) {
$mail->Body = $message;
@@ -653,28 +233,42 @@ function sendRawEmail ($toEmail, $subject, $message, $from) {
} else {
$mail->Body = decodeEntities($message);
}
+
$mail->AddAddress($toEmail, '');
- $mail->AddReplyTo(getConfig('WEBMASTER'), getConfig('MAIN_TITLE'));
+ $mail->AddReplyTo(getConfig('WEBMASTER'), getMainTitle());
$mail->AddCustomHeader('Errors-To:' . getConfig('WEBMASTER'));
$mail->AddCustomHeader('X-Loop:' . getConfig('WEBMASTER'));
+ $mail->AddCustomHeader('Bounces-To:' . getConfig('WEBMASTER'));
$mail->Send();
+
+ // Has an error occured?
+ if (!empty($mail->ErrorInfo)) {
+ // Log message
+ logDebugMessage(__FUNCTION__, __LINE__, 'Error while sending mail: ' . $mail->ErrorInfo);
+
+ // Raise an error
+ return false;
+ } else {
+ // All fine!
+ return true;
+ }
} else {
// Use legacy mail() command
- mail($toEmail, $subject, decodeEntities($message), $from);
+ return mail($toEmail, $subject, decodeEntities($message), $headers);
}
}
// Generate a password in a specified length or use default password length
-function generatePassword ($length = 0) {
+function generatePassword ($length = '0') {
// Auto-fix invalid length of zero
- if ($length == 0) $length = getConfig('pass_len');
+ if ($length == '0') $length = getConfig('pass_len');
// Initialize array with all allowed chars
$ABC = explode(',', 'a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,0,1,2,3,4,5,6,7,8,9,-,+,_,/,.');
// Start creating password
$PASS = '';
- for ($i = 0; $i < $length; $i++) {
+ for ($i = '0'; $i < $length; $i++) {
$PASS .= $ABC[mt_rand(0, count($ABC) -1)];
} // END - for
@@ -690,23 +284,33 @@ function generatePassword ($length = 0) {
}
// Generates a human-readable timestamp from the Uni* stamp
-function generateDateTime ($time, $mode = 0) {
+function generateDateTime ($time, $mode = '0') {
+ // If the stamp is zero it mostly didn't "happen"
+ if ($time == '0') {
+ // Never happend
+ return '{--NEVER_HAPPENED--}';
+ } // END - if
+
// Filter out numbers
$time = bigintval($time);
- // If the stamp is zero it mostly didn't "happen"
- if ($time == 0) {
- // Never happend
- return getMessage('NEVER_HAPPENED');
+ // Is it cached?
+ if (isset($GLOBALS[__FUNCTION__][$time][$mode])) {
+ // Then use it
+ return $GLOBALS[__FUNCTION__][$time][$mode];
} // END - if
+ // Detect language
switch (getLanguage()) {
case 'de': // German date / time format
switch ($mode) {
- case 0: $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break;
- case 1: $ret = strtolower(date('d.m.Y - H:i', $time)); break;
- case 2: $ret = date('d.m.Y|H:i', $time); break;
- case 3: $ret = date('d.m.Y', $time); break;
+ case '0': $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break;
+ case '1': $ret = strtolower(date('d.m.Y - H:i', $time)); break;
+ case '2': $ret = date('d.m.Y|H:i', $time); break;
+ case '3': $ret = date('d.m.Y', $time); break;
+ case '4': $ret = date('d.m.Y|H:i:s', $time); break;
+ case '5': $ret = date('d-m-Y (l-F-T)', $time); break;
+ case '6': $ret = date('Ymd', $time); break;
default:
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
break;
@@ -715,57 +319,57 @@ function generateDateTime ($time, $mode = 0) {
default: // Default is the US date / time format!
switch ($mode) {
- case 0: $ret = date('r', $time); break;
- case 1: $ret = date('Y-m-d - g:i A', $time); break;
- case 2: $ret = date('y-m-d|H:i', $time); break;
- case 3: $ret = date('y-m-d', $time); break;
+ case '0': $ret = date('r', $time); break;
+ case '1': $ret = strtolower(date('Y-m-d - g:i A', $time)); break;
+ case '2': $ret = date('y-m-d|H:i', $time); break;
+ case '3': $ret = date('y-m-d', $time); break;
+ case '4': $ret = date('d.m.Y|H:i:s', $time); break;
+ case '5': $ret = date('d-m-Y (l-F-T)', $time); break;
+ case '6': $ret = date('Ymd', $time); break;
default:
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
break;
} // END - switch
} // END - switch
+ // Store it in cache
+ $GLOBALS[__FUNCTION__][$time][$mode] = $ret;
+
// Return result
return $ret;
}
// Translates Y/N to yes/no
function translateYesNo ($yn) {
- // Default
- $translated = '??? (' . $yn . ')';
- switch ($yn) {
- case 'Y': $translated = getMessage('YES'); break;
- case 'N': $translated = getMessage('NO'); break;
- default:
- // Log unknown value
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected Y/N!", $yn));
- break;
- }
+ // Is it cached?
+ if (!isset($GLOBALS[__FUNCTION__][$yn])) {
+ // Default
+ $GLOBALS[__FUNCTION__][$yn] = '??? (' . $yn . ')';
+ switch ($yn) {
+ case 'Y': $GLOBALS[__FUNCTION__][$yn] = '{--YES--}'; break;
+ case 'N': $GLOBALS[__FUNCTION__][$yn] = '{--NO--}'; break;
+ default:
+ // Log unknown value
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected Y/N!", $yn));
+ break;
+ } // END - switch
+ } // END - if
// Return it
- return $translated;
+ return $GLOBALS[__FUNCTION__][$yn];
}
// Translates the "pool type" into human-readable
function translatePoolType ($type) {
- // Default?type is unknown
- $translated = sprintf(getMessage('POOL_TYPE_UNKNOWN'), $type);
-
- // Generate constant
- $constName = sprintf("POOL_TYPE_%s", $type);
-
- // Does it exist?
- if (isMessageIdValid($constName)) {
- // Then use it
- $translated = getMessage($constName);
- } // END - if
-
// Return "translation"
- return $translated;
+ return sprintf("{--POOL_TYPE_%s--}", $type);
}
// Translates the american decimal dot into a german comma
-function translateComma ($dotted, $cut = true, $max = 0) {
+function translateComma ($dotted, $cut = true, $max = '0') {
+ // First, cast all to double, due to PHP changes
+ $dotted = (double) $dotted;
+
// Default is 3 you can change this in admin area "Misc -> Misc Options"
if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', 3);
@@ -776,31 +380,32 @@ function translateComma ($dotted, $cut = true, $max = 0) {
if ($max > 0) $maxComma = $max;
// Cut zeros off?
- if (($cut === true) && ($max == 0)) {
+ if (($cut === true) && ($max == '0')) {
// Test for commata if in cut-mode
$com = explode('.', $dotted);
if (count($com) < 2) {
// Don't display commatas even if there are none... ;-)
- $maxComma = 0;
- }
+ $maxComma = '0';
+ } // END - if
} // END - if
// Debug log
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "dotted={$dotted},maxComma={$maxComma}");
// Translate it now
+ $translated = $dotted;
switch (getLanguage()) {
case 'de': // German language
- $dotted = number_format($dotted, $maxComma, ',', '.');
+ $translated = number_format($dotted, $maxComma, ',', '.');
break;
default: // All others
- $dotted = number_format($dotted, $maxComma, '.', ',');
+ $translated = number_format($dotted, $maxComma, '.', ',');
break;
- }
+ } // END - switch
// Return translated value
- return $dotted;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dotted=' . $dotted . ',translated=' . $translated . ',maxComma=' . $maxComma);
+ return $translated;
}
// Translate Uni*-like gender to human-readable
@@ -810,14 +415,17 @@ function translateGender ($gender) {
// Male/female or company?
switch ($gender) {
- case 'M': $ret = getMessage('GENDER_M'); break;
- case 'F': $ret = getMessage('GENDER_F'); break;
- case 'C': $ret = getMessage('GENDER_C'); break;
+ case 'M': // Male
+ case 'F': // Female
+ case 'C': // Company
+ $ret = sprintf("{--GENDER_%s--}", $gender);
+ break;
+
default:
- // Log unknown gender
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
+ // Please report bugs on unknown genders
+ debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
break;
- }
+ } // END - switch
// Return translated gender
return $ret;
@@ -830,17 +438,17 @@ function translateUserStatus ($status) {
case 'UNCONFIRMED':
case 'CONFIRMED':
case 'LOCKED':
- $ret = getMessage(sprintf("ACCOUNT_%s", $status));
+ $ret = sprintf("{--ACCOUNT_STATUS_%s--}", $status);
break;
case '':
case null:
- $ret = getMessage('ACCOUNT_DELETED');
+ $ret = '{--ACCOUNT_STATUS_DELETED--}';
break;
default:
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
- $ret = sprintf(getMessage('UNKNOWN_STATUS'), $status);
+ // Please report all unknown status
+ debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown status %s(%s) detected.", $status, gettype($status)));
break;
} // END - switch
@@ -848,12 +456,40 @@ function translateUserStatus ($status) {
return $ret;
}
+// "Translates" 'visible' and 'locked' to a CSS class
+function translateMenuVisibleLocked ($content, $prefix = '') {
+ // Translate 'visible' and keep an eye on the prefix
+ switch ($content['visible']) {
+ // Should be visible
+ case 'Y': $content['visible_css'] = $prefix . 'menu_visible' ; break;
+ case 'N': $content['visible_css'] = $prefix . 'menu_invisible'; break;
+ default:
+ // Please report this
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported visible value detected. content=' . print_r($content, true) . '
');
+ break;
+ } // END - switch
+
+ // Translate 'locked' and keep an eye on the prefix
+ switch ($content['locked']) {
+ // Should be locked
+ case 'Y': $content['locked_css'] = $prefix . 'menu_locked' ; break;
+ case 'N': $content['locked_css'] = $prefix . 'menu_unlocked'; break;
+ default:
+ // Please report this
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported locked value detected. content=' . print_r($content, true) . '
');
+ break;
+ } // END - switch
+
+ // Return the resulting array
+ return $content;
+}
+
// Generates an URL for the dereferer
function generateDerefererUrl ($URL) {
// Don't de-refer our own links!
- if (substr($URL, 0, strlen(getConfig('URL'))) != getConfig('URL')) {
+ if (substr($URL, 0, strlen(getUrl())) != getUrl()) {
// De-refer this link
- $URL = '{?URL?}/modules.php?module=loader&url=' . encodeString(compileUriCode($URL));
+ $URL = '{%url=modules.php?module=loader&url=' . encodeString(compileUriCode($URL)) . '%}';
} // END - if
// Return link
@@ -863,7 +499,7 @@ function generateDerefererUrl ($URL) {
// Generates an URL for the frametester
function generateFrametesterUrl ($URL) {
// Prepare frametester URL
- $frametesterUrl = sprintf("{?URL?}/modules.php?module=frametester&url=%s",
+ $frametesterUrl = sprintf("{%%url=modules.php?module=frametester&url=%s%%}",
encodeString(compileUriCode($URL))
);
@@ -876,11 +512,11 @@ function countSelection ($array) {
// Integrity check
if (!is_array($array)) {
// Not an array!
- debug_report_bug(__FUNCTION__.': No array provided.');
+ debug_report_bug(__FUNCTION__, __LINE__, 'No array provided.');
} // END - if
// Init count
- $ret = 0;
+ $ret = '0';
// Count all entries
foreach ($array as $key => $selected) {
@@ -892,17 +528,12 @@ function countSelection ($array) {
return $ret;
}
-// Generate XHTML code for the CAPTCHA
-function generateCaptchaCode ($code, $type, $DATA, $userid) {
- return '
';
-}
-
// Generates a timestamp (some wrapper for mktime())
function makeTime ($hours, $minutes, $seconds, $stamp) {
// Extract day, month and year from given timestamp
- $days = date('d', $stamp);
- $months = date('m', $stamp);
- $years = date('Y', $stamp);
+ $days = getDay($stamp);
+ $months = getMonth($stamp);
+ $years = getYear($stamp);
// Create timestamp for wished time which depends on extracted date
return mktime(
@@ -916,49 +547,46 @@ function makeTime ($hours, $minutes, $seconds, $stamp) {
}
// Redirects to an URL and if neccessarry extends it with own base URL
-function redirectToUrl ($URL) {
- // Compile out codes
- eval('$URL = "' . compileRawCode($URL) . '";');
+function redirectToUrl ($URL, $allowSpider = true) {
+ // Remove {%url=
+ if (substr($URL, 0, 6) == '{%url=') $URL = substr($URL, 6, -2);
- // Check if http(s):// is there
- if ((substr($URL, 0, 7) != 'http://') && (substr($URL, 0, 8) != 'https://')) {
- // Make all URLs full-qualified
- $URL = getConfig('URL') . '/' . $URL;
- } // END - if
-
- // Three different debug ways...
- //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
- //* DEBUG: */ die($URL);
+ // Compile out codes
+ eval('$URL = "' . compileRawCode(encodeUrl($URL)) . '";');
// Default 'rel' value is external, nofollow is evil from Google and hurts the Internet
$rel = ' rel="external"';
// Do we have internal or external URL?
- if (substr($URL, 0, strlen(getConfig('URL'))) == getConfig('URL')) {
+ if (substr($URL, 0, strlen(getUrl())) == getUrl()) {
// Own (=internal) URL
$rel = '';
} // END - if
- // Get output buffer
- $GLOBALS['output'] = ob_get_contents();
-
- // Clear it only if there is content
- if (!empty($GLOBALS['output'])) {
- clearOutputBuffer();
- } // END - if
+ // Three different ways to debug...
+ //* DEBUG: */ debug_report_bug(__FUNCTION__, __LINE__, 'URL=' . $URL);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
+ //* DEBUG: */ die($URL);
// Simple probe for bots/spiders from search engines
- if ((strpos(detectUserAgent(), 'spider') !== false) || (strpos(detectUserAgent(), 'bot') !== false)) {
- // Secure the URL against bad things such als HTML insertions and so on...
- $URL = secureString($URL);
+ if ((isSpider()) && ($allowSpider === true)) {
+ // Set HTTP-Status
+ setHttpStatus('200 OK');
+
+ // Set content-type here to fix a missing array element
+ setContentType('text/html');
// Output new location link as anchor
- outputHtml('' . $URL . '');
+ outputHtml('' . secureString($URL) . '');
} elseif (!headers_sent()) {
+ // Clear output buffer
+ clearOutputBuffer();
+
+ // Clear own output buffer
+ $GLOBALS['output'] = '';
+
// Load URL when headers are not sent
- //* DEBUG: */ debug_report_bug("URL={$URL}");
- sendHeader('Location: '.str_replace('&', '&', $URL));
+ sendRawRedirect(doFinalCompilation(str_replace('&', '&', $URL), false));
} else {
// Output error message
loadInclude('inc/header.php');
@@ -970,132 +598,6 @@ function redirectToUrl ($URL) {
shutdown();
}
-// Wrapper for redirectToUrl but URL comes from a configuration entry
-function redirectToConfiguredUrl ($configEntry) {
- // Get the URL
- $URL = getConfig($configEntry);
-
- // Is this URL set?
- if (is_null($URL)) {
- // Then abort here
- debug_report_bug(sprintf("Configuration entry %s is not set!", $configEntry));
- } // END - if
-
- // Load the URL
- redirectToUrl($URL);
-}
-
-// Compiles the given HTML/mail code
-function compileCode ($code, $simple = false, $constants = true, $full = true) {
- // Is the code a string?
- if (!is_string($code)) {
- // Silently return it
- return $code;
- } // END - if
-
- // Start couting
- $startCompile = explode(' ', microtime());
-
- // Comile the code
- $code = compileRawCode($code, $simple, $constants, $full);
-
- // Get timing
- $compiled = explode(' ', microtime());
-
- // Add timing
- $code .= '';
-
- // Return compiled code
- return $code;
-}
-
-// Compiles the code (use compileCode() only for HTML because of the comments)
-function compileRawCode ($code, $simple = false, $constants = true, $full = true) {
- // Is the code a string?
- if (!is_string($code)) {
- // Silently return it
- return $code;
- } // END - if
-
- // Init replacement-array with full security characters
- $secChars = $GLOBALS['security_chars'];
-
- // Select smaller set of chars to replace when we e.g. want to compile URLs
- if ($full === false) $secChars = $GLOBALS['url_chars'];
-
- // Compile more through a filter
- $code = runFilterChain('compile_code', $code);
-
- // Compile constants
- if ($constants === true) {
- // BEFORE 0.2.1 : Language and data constants
- // WITH 0.2.1+ : Only language constants
- $code = str_replace('{--', "\".getMessage('", str_replace('--}', "').\"", $code));
-
- // BEFORE 0.2.1 : Not used
- // WITH 0.2.1+ : Data constants
- $code = str_replace('{!', "\".constant('", str_replace("!}", "').\"", $code));
- } // END - if
-
- // Compile QUOT and other non-HTML codes
- foreach ($secChars['to'] as $k => $to) {
- // Do the reversed thing as in inc/libs/security_functions.php
- $code = str_replace($to, $secChars['from'][$k], $code);
- } // END - foreach
-
- // But shall I keep simple quotes for later use?
- if ($simple) $code = str_replace("'", '{QUOT}', $code);
-
- // Find $content[bla][blub] entries
- preg_match_all('/\$(content|GLOBALS|DATA)((\[([a-zA-Z0-9-_]+)\])*)/', $code, $matches);
-
- // Are some matches found?
- if ((count($matches) > 0) && (count($matches[0]) > 0)) {
- // Replace all matches
- $matchesFound = array();
- foreach ($matches[0] as $key => $match) {
- // Fuzzy look has failed by default
- $fuzzyFound = false;
-
- // Fuzzy look on match if already found
- foreach ($matchesFound as $found => $set) {
- // Get test part
- $test = substr($found, 0, strlen($match));
-
- // Does this entry exist?
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):found={$found},match={$match},set={$set}
");
- if ($test == $match) {
- // Match found!
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):fuzzyFound!
");
- $fuzzyFound = true;
- break;
- } // END - if
- } // END - foreach
-
- // Skip this entry?
- if ($fuzzyFound === true) continue;
-
- // Take all string elements
- if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_" . $matches[4][$key]]))) {
- // Replace it in the code
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):key={$key},match={$match}
");
- $newMatch = str_replace('[', "['", str_replace(']', "']", $match));
- $code = str_replace($match, "\"." . $newMatch.".\"", $code);
- $matchesFound[$key . '_' . $matches[4][$key]] = 1;
- $matchesFound[$match] = 1;
- } elseif (!isset($matchesFound[$match])) {
- // Not yet replaced!
- //* DEBUG: */ outputHtml(__FUNCTION__."(".__LINE__."):match={$match}
");
- $code = str_replace($match, "\"." . $match.".\"", $code);
- $matchesFound[$match] = 1;
- }
- } // END - foreach
- } // END - if
-
- // Return it
- return $code;
-}
-
/************************************************************************
* *
* Gaenderter Sortier-Algorythmus, $array wird nach dem Array (!) *
@@ -1112,7 +614,7 @@ function compileRawCode ($code, $simple = false, $constants = true, $full = true
* Sie, dass es doch nicht so schwer ist! :-) *
* *
************************************************************************/
-function array_pk_sort (&$array, $a_sort, $primary_key = 0, $order = -1, $nums = false) {
+function array_pk_sort (&$array, $a_sort, $primary_key = '0', $order = -1, $nums = false) {
$dummy = $array;
while ($primary_key < count($a_sort)) {
foreach ($dummy[$a_sort[$primary_key]] as $key => $value) {
@@ -1147,119 +649,6 @@ function array_pk_sort (&$array, $a_sort, $primary_key = 0, $order = -1, $nums =
$array = $dummy;
}
-//
-function addSelectionBox ($type, $default, $prefix = '', $id = 0) {
- $OUT = '';
-
- if ($type == 'yn') {
- // This is a yes/no selection only!
- if ($id > 0) $prefix .= "[" . $id."]";
- $OUT .= "