X-Git-Url: https://git.mxchange.org/?a=blobdiff_plain;f=docs-mini%2FREADME.IRIX;h=9ca12e99df4f81edbc3f4b76002ecd2c52c9c5de;hb=4e24fba0d54faa961f6d236f2ded4d66685d5a7d;hp=9b52a4930baa2d1c3b06cd86df7261a213132049;hpb=f2bb747bf033500ddadbfa41634602ee94dffbe1;p=flightgear.git diff --git a/docs-mini/README.IRIX b/docs-mini/README.IRIX index 9b52a4930..9ca12e99d 100644 --- a/docs-mini/README.IRIX +++ b/docs-mini/README.IRIX @@ -1,154 +1,73 @@ -V. Procedure to build FGFS with Native SGI Irix Compilers from CVS Sources -========================================================================== -(Contributed by Todd Smith with modifications -and updates by Curt Olson) +This file is made possible by contributions from: + Todd Smith + Curt Olson + Erik Hofman -Download the latest version of plib (1.0.18) from: - http://www.woodsoup.org/~sbaker/plib/ +1. Requirements -Configure it with the default prefix of /usr/local which places -everthing in a tree rooted at /usr/local/plib: +The following packages should be installed before FlightGear (or SimGear +or PLib) can be compiled on Irix: - sh$ CC="cc -Xcpluscomm" CXX=CC ./configure + Irix development headers and libraries + (from the Irix 6.5 development CD's) + -------------------------------------- -*Before* running make, fix up the plib Makefiles using the script -provided with the FlightGear distribution: + compiler_dev.sw.base irix_dev.sw.headers + compiler_dev.sw.ld dev.sw.lib + compiler_dev.sw.util + compiler_dev.hdr.lib - find . -name Makefile -exec .../src/FlightGear-0.7.x/irix-hack.pl {} \; + gl_dev.sw.gldev dmedia_dev.sw.base + x_dev.sw.dev -This applies a fix in all the Makefiles to the lib creation command -(to use CC -ar rather than ar) as per a tip in the SGI pipeline -periodical. + MipsPro C and C++ Compiler environment + --------------------------------------- -Now, make and install plib. + c++_dev.hdr.lib c_dev.sw.c + c++_dev.sw.c++ c_fe.sw.c + c++_dev.sw.lib + c++_eoe.sw.lib + c++_fe.sw.c++ -Download the latest fgfs source snapshot from: + SGI Freeware packages + --------------------------------------- - ftp://ftp.flightgear.org/pub/fgfs/Source/Snapshots/ + GLUT: http://freeware.sgi.com + ZLIB: http://freeware.sgi.com -Configure and build fgfs as you did plib: - sh$ CC="cc -Xcpluscomm" CXX=CC ./configure - sh$ find . -name Makefile -exec .../src/FlightGear-0.7.x/irix-hack.pl {} \; + FlightGear Flight Simulator Software + --------------------------------------- + FlightGear: http://www.flightgear.org + SimGear: http://www.simgear.org + Plib: http://plib.sourceforge.net -VI. Additional Notes for Building on IRIX from CVS Sources -========================================================== -(Contributed by Todd Smith ) -and updates by Curt Olson) +2. Compiling and Installation -Download the FlightGear-0.7.x via anonymous cvs as usual, then do: -> aclocal # normal -> automake -a -i # added '-i' flag to avoid dependency calc - # that only sgi cc/CC doesn't support -> autoconf # normal +NOTE: Make sure automake version 1.8.1 or later is installed !!! -Note the change in automake's command argument. +To create a set of binaries it is important to follow these steps. This +will build a statically linked executable /opt/bin/fgfs -Now set env variables to use native compilers (csh syntax). + 1. Install GLUT and Zlib + 2. Configure and install plib + 3. After extracting SimGear and FlightGear make sure to run autogen.sh first. + This will fix a linker problem for MipsPro compilers. + 4. Configure and install SimGear and then FlightGear -> setenv CC cc -> setenv CXX CC -> setenv CFLAGS '-Xcpluscomm -DEBUG:suppress=1001,1012,1014, - 1116,1172,1174,1401,1460,1551,1552' -> setenv CXXFLAGS '-DEBUG:suppress=1001,1012,1014,1116,1172, - 1174,1401,1460,1551,1552,3303,3322' -The '-DEBUG:suppress=' stuff just suppresses anonying warnings during -compile. The meaning of each one is shown later in this file. -You can use all or none of these here. +3. Running -> setenv CPPFLAGS '-woff 1014' +Before the FlightGear program could be run it is important to install the +FlightGear base package (the default is to extract the base package into +/opt/lib32). -This is required so that configure will really believe that plib -is installed. ( Otherwise a compiler warning makes configure -that plib/pu.h couldn't be found. ) +This package can be found at: http://www.flightgear.org -> ./configure -> find . -name Makefile -exec irix-hack.pl {} \; # normal irix hack -> gmake - -Runs great. - -Todd -msmith@sikorsky.com - -------------------------------------------- -Warnings that I get. Ignore at your lesiure. - -C and C++: -warning(1001): last line of file ends without a newline -warning(1012): parsing restarts here after previous syntax error -warning(1014): extra text after expected end of preprocessing directive (breaks configure) -warning(1116): non-void function "poly_index_init" should return a value -warning(1172): subscript out of range -warning(1174): variable "j" was declared but never referenced -warning(1401): qualified name is not allowed in member declaration -warning(1460): function "..." redeclared "inline" after being called -warning(1551): variable "Altitude" is used before its value is set -warning(1552): variable "last" was set but never used - -C++ only: -warning(3303): type qualifier on return type is meaningless -warning(3322): omission of explicit type is nonstandard ("int" assumed) - - -VII. Additional Native SGI Irix Compilers Notes -============================================== - -Fixing all the Makefiles' with irix-hack.pl is *VERY* important for -your success): - - find . -name Makefile -exec irix-hack.pl {} \; - -This touches up the Makefiles to build libfoo.a with - - CC -ar -o libfoo.a file1.o file2.o ... - -The traditional method is to run: - - ar cru libfoo.a file1.o file2.o - -I wonder if this means that the native SGI "ar" is somewhat broke? - -Note, you should make sure you have perl installed on your system. The -"irix-hack.pl" script assumes that perl is located in /usr/bin/perl so -if this isn't the proper location on your system, change it in the first -line of "irix-hack.pl" before running the above command. One way to see -if perl is on your system (and determine where) is to run: - - which perl - -Perl can be installed from "eoe.sw.gifts_perl" or can be fetched and -built from the net. - -Finally you should run Gnu make. The native Irix make utility just -can't handle the makefiles generated by the automake program. Thus -you will need to use Gnu make. It's called "gmake" on my system so I -just run: - - gmake - -Don't worry about the make failing in the Tools directory. That's all -under construction stuff right now (10/7/99) and if you get that far, -rejoice because it means the simulator was successfully built in the -Simulator/Main subdirectory. - -Special note for those Irix users using the native compilers *AND* checking -out the current source tree via CVS: - -You will need to run "aclocal ; automake -a ; autoconf" as per -README.autoconf, but you need an additional flag for automake to disable -automatic dependency building (which breaks the native Irix compilers.) -You should instead run: - - aclocal ; automake -a --include-deps; autoconf - -Then, proceed on to the configure step. - -Questions? I realize this section is a big heap of random information so -if something isn't quite working for you, please ask. +When all is set and done, just run: /opt/bin/fgfs +To see the command line options, type: /opt/bin/fgfs -h