X-Git-Url: https://git.mxchange.org/?a=blobdiff_plain;f=inc%2Ffunctions.php;h=4c5ca96fa50f0e41fc16d68381efe35fccb8dd1d;hb=537df432292cb0aa63070479258e3e84b182a28b;hp=77447fb99786f289545fa8c314c35798dbe116b1;hpb=414570c5081d337bb6c28dcf521bd8bca02f69e7;p=mailer.git diff --git a/inc/functions.php b/inc/functions.php index 77447fb997..740dccbd1b 100644 --- a/inc/functions.php +++ b/inc/functions.php @@ -1,7 +1,7 @@ {--FATAL_ERROR--}: {--LANG_NO_RENDER_DIRECT--}"); - break; - } - } elseif ((constant('_OB_CACHING') == "on") && (isset($GLOBALS['footer_sent'])) && ($GLOBALS['footer_sent'] == 1)) { - // Headers already sent? - if (headers_sent()) { - // Log this error - DEBUG_LOG(__FUNCTION__, __LINE__, "Headers already sent! We need debug backtrace here."); - - // Trigger an user error - debug_report_bug("Headers are already sent!"); - } // END - if - - // Output cached HTML code - $OUTPUT = ob_get_contents(); - - // Clear output buffer for later output if output is found - if (!empty($OUTPUT)) { - clearOutputBuffer(); - } // END - if - - // Send HTTP header - header("HTTP/1.1 200"); - - // Used later - $now = gmdate('D, d M Y H:i:s') . ' GMT'; - - // General headers for no caching - header("Expired: " . $now); // RFC2616 - Section 14.21 - header("Last-Modified: " . $now); - header("Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0"); // HTTP/1.1 - header("Pragma: no-cache"); // HTTP/1.0 - header("Connection: Close"); - - // Extension "rewrite" installed? - if ((EXT_IS_ACTIVE("rewrite")) && ($GLOBALS['output_mode'] != "1") && ($GLOBALS['output_mode'] != "-1")) { - $OUTPUT = REWRITE_LINKS($OUTPUT); - } // END - if - - // Compile and run finished rendered HTML code - while (strpos($OUTPUT, '{!') > 0) { - // Prepare the content and eval() it... - $newContent = ""; - $eval = "\$newContent = \"".COMPILE_CODE(smartAddSlashes($OUTPUT))."\";"; - eval($eval); - - // Was that eval okay? - if (empty($newContent)) { - // Something went wrong! - mxchange_die("Evaluation error:
".htmlentities($eval)."
"); - } // END - if - $OUTPUT = $newContent; - } // END - while + die(); +} // END - if - // Output code here, DO NOT REMOVE! ;-) - OUTPUT_RAW($OUTPUT); - } elseif ((constant('OUTPUT_MODE') == "render") && (!empty($OUTPUT))) { - // Rewrite links when rewrite extension is active - if ((EXT_IS_ACTIVE("rewrite")) && ($GLOBALS['output_mode'] != "1") && ($GLOBALS['output_mode'] != "-1")) { - $OUTPUT = REWRITE_LINKS($OUTPUT); - } // END - if +// Sends out all headers required for HTTP/1.1 reply +function sendHttpHeaders () { + // Used later + $now = gmdate('D, d M Y H:i:s') . ' GMT'; - // Compile and run finished rendered HTML code - while (strpos($OUTPUT, '{!') > 0) { - $eval = "\$OUTPUT = \"".COMPILE_CODE(smartAddSlashes($OUTPUT))."\";"; - eval($eval); - } // END - while + // Send HTTP header + sendHeader('HTTP/1.1 ' . getHttpStatus()); - // Output code here, DO NOT REMOVE! ;-) - OUTPUT_RAW($OUTPUT); - } -} - -// Output the raw HTML code -function OUTPUT_RAW ($HTML) { - // Output stripped HTML code to avoid broken JavaScript code, etc. - echo stripslashes(stripslashes($HTML)); - - // Flush the output if only constant('_OB_CACHING') is not "on" - if (constant('_OB_CACHING') != "on") { - // Flush it - flush(); - } // END - if + // General headers for no caching + sendHeader('Expires: ' . $now); // RFC2616 - Section 14.21 + sendHeader('Last-Modified: ' . $now); + sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1 + sendHeader('Pragma: no-cache'); // HTTP/1.0 + sendHeader('Connection: Close'); + sendHeader('Content-Type: ' . getContentType() . '; charset=UTF-8'); + sendHeader('Content-Language: ' . getLanguage()); } // Init fatal message array @@ -190,7 +71,7 @@ function getFatalArray () { } // Add a fatal error message to the queue array -function addFatalMessage ($F, $L, $message, $extra="") { +function addFatalMessage ($F, $L, $message, $extra = '') { if (is_array($extra)) { // Multiple extras for a message with masks $message = call_user_func_array('sprintf', $extra); @@ -203,13 +84,13 @@ function addFatalMessage ($F, $L, $message, $extra="") { $GLOBALS['fatal_messages'][] = $message; // Log fatal messages away - DEBUG_LOG($F, $L, " message={$message}"); + logDebugMessage($F, $L, 'Fatal error message: ' . $message); } // Getter for total fatal message count function getTotalFatalErrors () { - // Init coun - $count = 0; + // Init count + $count = '0'; // Do we have at least the first entry? if (!empty($GLOBALS['fatal_messages'][0])) { @@ -221,325 +102,168 @@ function getTotalFatalErrors () { return $count; } -// Load a template file and return it's content (only it's name; do not use ' or ") -function LOAD_TEMPLATE ($template, $return=false, $content=array()) { - // Add more variables which you want to use in your template files - global $DATA, $_CONFIG, $username; - - // Make all template names lowercase - $template = strtolower($template); - - // Count the template load - incrementConfigEntry('num_templates'); - - // Prepare IP number and User Agent - $REMOTE_ADDR = GET_REMOTE_ADDR(); - if (!defined('REMOTE_ADDR')) define('REMOTE_ADDR', $REMOTE_ADDR); - $HTTP_USER_AGENT = GET_USER_AGENT(); - - // Init some data - $ret = ""; - if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = 0; - - // @DEPRECATED Try to rewrite the if() condition - if ($template == "member_support_form") { - // Support request of a member - $result = SQL_QUERY_ESC("SELECT userid, gender, surname, family, email FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1", - array($GLOBALS['userid']), __FUNCTION__, __LINE__); - - // Is content an array? - if (is_array($content)) { - // Merge data - $content = merge_array($content, SQL_FETCHARRAY($result)); - - // Translate gender - $content['gender'] = TRANSLATE_GENDER($content['gender']); - } else { - // @DEPRECATED - // @TODO Fine all templates which are using these direct variables and rewrite them. - // @TODO After this step is done, this else-block is history - list($gender, $surname, $family, $email) = SQL_FETCHROW($result); - - // Translate gender - $gender = TRANSLATE_GENDER($gender); - DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("DEPRECATION-WARNING: content is not array (%s).", gettype($content))); - } - - // Free result - SQL_FREERESULT($result); - } // END - if - - // Generate date/time string - $date_time = MAKE_DATETIME(time(), "1"); - - // Base directory - $BASE = sprintf("%stemplates/%s/html/", constant('PATH'), GET_LANGUAGE()); - $MODE = ""; - - // Check for admin/guest/member templates - if (strpos($template, "admin_") > -1) { - // Admin template found - $MODE = "admin/"; - } elseif (strpos($template, "guest_") > -1) { - // Guest template found - $MODE = "guest/"; - } elseif (strpos($template, "member_") > -1) { - // Member template found - $MODE = "member/"; - } elseif (strpos($template, "install_") > -1) { - // Installation template found - $MODE = "install/"; - } elseif (strpos($template, "ext_") > -1) { - // Extension template found - $MODE = "ext/"; - } elseif (strpos($template, "la_") > -1) { - // "Logical-area" template found - $MODE = "la/"; - } else { - // Test for extension - $test = substr($template, 0, strpos($template, "_")); - if (EXT_IS_ACTIVE($test)) { - // Set extra path to extension's name - $MODE = $test."/"; - } - } - - //////////////////////// - // Generate file name // - //////////////////////// - $FQFN = $BASE.$MODE.$template.".tpl"; - - if ((!empty($GLOBALS['what'])) && ((strpos($template, "_header") > 0) || (strpos($template, "_footer") > 0)) && (($MODE == "guest/") || ($MODE == "member/") || ($MODE == "admin/"))) { - // Select what depended header/footer template file for admin/guest/member area - $file2 = sprintf("%s%s%s_%s.tpl", - $BASE, - $MODE, - $template, - SQL_ESCAPE($GLOBALS['what']) - ); - - // Probe for it... - if (FILE_READABLE($file2)) $FQFN = $file2; - - // Remove variable from memory - unset($file2); - } - - // Does the special template exists? - if (!FILE_READABLE($FQFN)) { - // Reset to default template - $FQFN = $BASE.$template.".tpl"; - } // END - if - - // Now does the final template exists? - if (FILE_READABLE($FQFN)) { - // The local file does exists so we load it. :) - $tmpl_file = READ_FILE($FQFN); - - // Replace ' to our own chars to preventing them being quoted - while (strpos($tmpl_file, "'") !== false) { $tmpl_file = str_replace("'", '{QUOT}', $tmpl_file); } - - // Do we have to compile the code? - $ret = ""; - if ((strpos($tmpl_file, "\$") !== false) || (strpos($tmpl_file, '{--') !== false) || (strpos($tmpl_file, '--}') > 0)) { - // Okay, compile it! - $tmpl_file = "\$ret=\"".COMPILE_CODE(smartAddSlashes($tmpl_file))."\";"; - eval($tmpl_file); - } else { - // Simply return loaded code - $ret = $tmpl_file; - } - - // Add surrounding HTML comments to help finding bugs faster - $ret = "\n".$ret."\n"; - } elseif ((IS_ADMIN()) || ((isInstalling()) && (!isInstalled()))) { - // Only admins shall see this warning or when installation mode is active - $ret = "
".TEMPLATE_404."
-(".basename($FQFN).")
-
-".TEMPLATE_CONTENT." -
".print_r($content, true)."
-".TEMPLATE_DATA." -
".print_r($DATA, true)."
-

"; - } - - // Remove content and data - unset($content); - unset($DATA); - - // Do we have some content to output or return? - if (!empty($ret)) { - // Not empty so let's put it out! ;) - if ($return === true) { - // Return the HTML code - return $ret; - } else { - // Output direct - OUTPUT_HTML($ret); - } - } elseif (isDebugModeEnabled()) { - // Warning, empty output! - return "E:".$template."
\n"; - } -} - // Send mail out to an email address -function SEND_EMAIL($TO, $SUBJECT, $MSG, $HTML = "N", $FROM = "") { - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):TO={$TO},SUBJECT={$SUBJECT}
\n"; +function sendEmail ($toEmail, $subject, $message, $isHtml = 'N', $mailHeader = '') { + //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail},SUBJECT={$subject}
"); // Compile subject line (for POINTS constant etc.) - $eval = "\$SUBJECT = decodeEntities(\"".COMPILE_CODE(smartAddSlashes($SUBJECT))."\");"; - eval($eval); + eval('$subject = decodeEntities("' . compileRawCode(escapeQuotes($subject)) . '");'); // Set from header - if ((!eregi("@", $TO)) && ($TO > 0)) { + if ((!isInStringIgnoreCase('@', $toEmail)) && ($toEmail > 0)) { // Value detected, is the message extension installed? - if (EXT_IS_ACTIVE("msg")) { - ADD_MESSAGE_TO_BOX($TO, $SUBJECT, $MSG, $HTML); + // @TODO Extension 'msg' does not exist + if (isExtensionActive('msg')) { + ADD_MESSAGE_TO_BOX($toEmail, $subject, $message, $isHtml); return; } else { - // Load email address - $result_email = SQL_QUERY_ESC("SELECT email FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1", array(bigintval($TO)), __FUNCTION__, __LINE__); - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):numRows=".SQL_NUMROWS($result_email)."
\n"; - // Does the user exist? - if (SQL_NUMROWS($result_email)) { - // Load email address - list($TO) = SQL_FETCHROW($result_email); + if (fetchUserData($toEmail)) { + // Get the email + $toEmail = getUserData('email'); } else { // Set webmaster - $TO = constant('WEBMASTER'); + $toEmail = getConfig('WEBMASTER'); } - - // Free result - SQL_FREERESULT($result_email); } - } elseif ("$TO" == "0") { + } elseif ($toEmail == '0') { // Is the webmaster! - $TO = constant('WEBMASTER'); + $toEmail = getConfig('WEBMASTER'); } - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):TO={$TO}
\n"; + //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail}
"); // Check for PHPMailer or debug-mode - if (!CHECK_PHPMAILER_USAGE()) { + if ((!checkPhpMailerUsage()) || (isDebugModeEnabled())) { // Not in PHPMailer-Mode - if (empty($FROM)) { + if (empty($mailHeader)) { // Load email header template - $FROM = LOAD_EMAIL_TEMPLATE("header"); + $mailHeader = loadEmailTemplate('header'); } else { // Append header - $FROM .= LOAD_EMAIL_TEMPLATE("header"); + $mailHeader .= loadEmailTemplate('header'); } - } elseif (isDebugModeEnabled()) { - if (empty($FROM)) { - // Load email header template - $FROM = LOAD_EMAIL_TEMPLATE("header"); - } else { - // Append header - $FROM .= LOAD_EMAIL_TEMPLATE("header"); - } - } - - // Compile "TO" - $eval = "\$TO = \"".COMPILE_CODE(smartAddSlashes($TO))."\";"; - eval($eval); - - // Compile "MSG" - $eval = "\$MSG = \"".COMPILE_CODE(smartAddSlashes($MSG))."\";"; - eval($eval); + } // END - if // Fix HTML parameter (default is no!) - if (empty($HTML)) $HTML = "N"; + if (empty($isHtml)) $isHtml = 'N'; + + // Debug mode enabled? if (isDebugModeEnabled()) { // In debug mode we want to display the mail instead of sending it away so we can debug this part - print("
-".htmlentities(trim($FROM))."
-To      : ".$TO."
-Subject : ".$SUBJECT."
-Message : ".$MSG."
-
\n"); - } elseif (($HTML == "Y") && (EXT_IS_ACTIVE("html_mail"))) { + outputHtml('
+Headers : ' . encodeEntities(utf8_decode(trim($mailHeader))) . '
+To      : ' . encodeEntities(utf8_decode($toEmail)) . '
+Subject : ' . encodeEntities(utf8_decode($subject)) . '
+Message : ' . encodeEntities(utf8_decode($message)) . '
+
'); + + // This is always fine + return true; + } elseif (($isHtml == 'Y') && (isExtensionActive('html_mail'))) { // Send mail as HTML away - SEND_HTML_EMAIL($TO, $SUBJECT, $MSG, $FROM); - } elseif (!empty($TO)) { + return sendHtmlEmail($toEmail, $subject, $message, $mailHeader); + } elseif (!empty($toEmail)) { // Send Mail away - SEND_RAW_EMAIL($TO, $SUBJECT, $MSG, $FROM); - } elseif ($HTML == "N") { + return sendRawEmail($toEmail, $subject, $message, $mailHeader); + } elseif ($isHtml != 'Y') { // Problem found! - SEND_RAW_EMAIL(constant('WEBMASTER'), "[PROBLEM:]".$SUBJECT, $MSG, $FROM); + return sendRawEmail(getConfig('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader); } + + // Why did we end up here? This should not happen + debug_report_bug(__FUNCTION__, __LINE__, 'Ending up: template=' . $template); } -// Check if legacy or PHPMailer command +// Check to use wether legacy mail() command or PHPMailer class // @TODO Rewrite this to an extension 'smtp' // @private -function CHECK_PHPMAILER_USAGE() { - return ((defined('SMTP_HOSTNAME')) && (defined('SMTP_USER')) && (defined('SMTP_PASSWORD')) && (constant('SMTP_HOSTNAME') != "") && (constant('SMTP_USER') != "")); +function checkPhpMailerUsage() { + return ((getConfig('SMTP_HOSTNAME') != '') && (getConfig('SMTP_USER') != '')); } -/* - * Send out a raw email with PHPMailer class or legacy mail() command - */ -function SEND_RAW_EMAIL ($to, $subject, $msg, $from) { +// Send out a raw email with PHPMailer class or legacy mail() command +function sendRawEmail ($toEmail, $subject, $message, $from) { + // Just compile all again, to put out all configs, etc. + eval('$toEmail = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($toEmail)), false) . '");'); + eval('$subject = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($subject)), false) . '");'); + eval('$message = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($message)), false) . '");'); + eval('$from = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($from)) , false) . '");'); + // Shall we use PHPMailer class or legacy mode? - if (CHECK_PHPMAILER_USAGE()) { + if (checkPhpMailerUsage()) { // Use PHPMailer class with SMTP enabled - LOAD_INC_ONCE("inc/phpmailer/class.phpmailer.php"); - LOAD_INC_ONCE("inc/phpmailer/class.smtp.php"); + loadIncludeOnce('inc/phpmailer/class.phpmailer.php'); + loadIncludeOnce('inc/phpmailer/class.smtp.php'); // get new instance $mail = new PHPMailer(); - $mail->PluginDir = sprintf("%sinc/phpmailer/", constant('PATH')); + + // Set charset to UTF-8 + $mail->CharSet = 'UTF-8'; + + // Path for PHPMailer + $mail->PluginDir = sprintf("%sinc/phpmailer/", getPath()); $mail->IsSMTP(); $mail->SMTPAuth = true; - $mail->Host = constant('SMTP_HOSTNAME'); + $mail->Host = getConfig('SMTP_HOSTNAME'); $mail->Port = 25; - $mail->Username = constant('SMTP_USER'); - $mail->Password = constant('SMTP_PASSWORD'); + $mail->Username = getConfig('SMTP_USER'); + $mail->Password = getConfig('SMTP_PASSWORD'); if (empty($from)) { - $mail->From = constant('WEBMASTER'); + $mail->From = getConfig('WEBMASTER'); } else { $mail->From = $from; } - $mail->FromName = constant('MAIN_TITLE'); + $mail->FromName = getMainTitle(); $mail->Subject = $subject; - if ((EXT_IS_ACTIVE("html_mail")) && (strip_tags($msg) != $msg)) { - $mail->Body = $msg; - $mail->AltBody = "Your mail program required HTML support to read this mail!"; + if ((isExtensionActive('html_mail')) && (secureString($message) != $message)) { + $mail->Body = $message; + $mail->AltBody = 'Your mail program required HTML support to read this mail!'; $mail->WordWrap = 70; $mail->IsHTML(true); } else { - $mail->Body = decodeEntities($msg); + $mail->Body = decodeEntities($message); } - $mail->AddAddress($to, ""); - $mail->AddReplyTo(constant('WEBMASTER'), constant('MAIN_TITLE')); - $mail->AddCustomHeader("Errors-To:".constant('WEBMASTER')); - $mail->AddCustomHeader("X-Loop:".constant('WEBMASTER')); + $mail->AddAddress($toEmail, ''); + $mail->AddReplyTo(getConfig('WEBMASTER'), getMainTitle()); + $mail->AddCustomHeader('Errors-To:' . getConfig('WEBMASTER')); + $mail->AddCustomHeader('X-Loop:' . getConfig('WEBMASTER')); $mail->Send(); + + // Has an error occured? + if (!empty($mail->ErrorInfo)) { + // Log message + logDebugMessage(__FUNCTION__, __LINE__, 'Error while sending mail: ' . $mail->ErrorInfo); + + // Raise an error + return false; + } else { + // All fine! + return true; + } } else { // Use legacy mail() command - @mail($to, $subject, decodeEntities($msg), $from); + return mail($toEmail, $subject, decodeEntities($message), $from); } } -// // Generate a password in a specified length or use default password length -function GEN_PASS ($LEN = 0) { +function generatePassword ($length = '0') { // Auto-fix invalid length of zero - if ($LEN == 0) $LEN = getConfig('pass_len'); + if ($length == '0') $length = getConfig('pass_len'); // Initialize array with all allowed chars - $ABC = explode(",", "a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,0,1,2,3,4,5,6,7,8,9,-,+,_,/"); + $ABC = explode(',', 'a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,0,1,2,3,4,5,6,7,8,9,-,+,_,/,.'); // Start creating password - $PASS = ""; - for ($i = 0; $i < $LEN; $i++) { + $PASS = ''; + for ($i = '0'; $i < $length; $i++) { $PASS .= $ABC[mt_rand(0, count($ABC) -1)]; } // END - for - // When the size is below 40 we can also add additional security by scrambling it + // When the size is below 40 we can also add additional security by scrambling + // it. Otherwise we may corrupt hashes if (strlen($PASS) <= 40) { // Also scramble the password $PASS = scrambleString($PASS); @@ -548,49 +272,96 @@ function GEN_PASS ($LEN = 0) { // Return the password return $PASS; } -// -function MAKE_DATETIME ($time, $mode="0") -{ - if ($time == 0) { + +// Generates a human-readable timestamp from the Uni* stamp +function generateDateTime ($time, $mode = '0') { + // If the stamp is zero it mostly didn't "happen" + if ($time == '0') { // Never happend - return NEVER_HAPPENED; - } else { - // Filter out numbers - $time = bigintval($time); - } + return '{--NEVER_HAPPENED--}'; + } // END - if - switch (GET_LANGUAGE()) - { - case "de": // German date / time format - switch ($mode) { - case "0": $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break; - case "1": $ret = strtolower(date("d.m.Y - H:i", $time)); break; - case "2": $ret = date("d.m.Y|H:i", $time); break; - case "3": $ret = date("d.m.Y", $time); break; - default: - DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode)); - break; - } - break; - - default: // Default is the US date / time format! - switch ($mode) { - case "0": $ret = date("r", $time); break; - case "1": $ret = date("Y-m-d - g:i A", $time); break; - case "2": $ret = date("y-m-d|H:i", $time); break; - case "3": $ret = date("y-m-d", $time); break; + // Filter out numbers + $time = bigintval($time); + + // Is it cached? + if (isset($GLOBALS[__FUNCTION__][$time][$mode])) { + // Then use it + return $GLOBALS[__FUNCTION__][$time][$mode]; + } // END - if + + // Detect language + switch (getLanguage()) { + case 'de': // German date / time format + switch ($mode) { + case '0': $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break; + case '1': $ret = strtolower(date('d.m.Y - H:i', $time)); break; + case '2': $ret = date('d.m.Y|H:i', $time); break; + case '3': $ret = date('d.m.Y', $time); break; + case '4': $ret = date('d.m.Y|H:i:s', $time); break; + case '5': $ret = date('d-m-Y (l-F-T)', $time); break; + case '6': $ret = date('Ymd', $time); break; + default: + logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode)); + break; + } + break; + + default: // Default is the US date / time format! + switch ($mode) { + case '0': $ret = date('r', $time); break; + case '1': $ret = strtolower(date('Y-m-d - g:i A', $time)); break; + case '2': $ret = date('y-m-d|H:i', $time); break; + case '3': $ret = date('y-m-d', $time); break; + case '4': $ret = date('d.m.Y|H:i:s', $time); break; + case '5': $ret = date('d-m-Y (l-F-T)', $time); break; + case '6': $ret = date('Ymd', $time); break; + default: + logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode)); + break; + } // END - switch + } // END - switch + + // Store it in cache + $GLOBALS[__FUNCTION__][$time][$mode] = $ret; + + // Return result + return $ret; +} + +// Translates Y/N to yes/no +function translateYesNo ($yn) { + // Is it cached? + if (!isset($GLOBALS[__FUNCTION__][$yn])) { + // Default + $GLOBALS[__FUNCTION__][$yn] = '??? (' . $yn . ')'; + switch ($yn) { + case 'Y': $GLOBALS[__FUNCTION__][$yn] = '{--YES--}'; break; + case 'N': $GLOBALS[__FUNCTION__][$yn] = '{--NO--}'; break; default: - DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode)); + // Log unknown value + logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected Y/N!", $yn)); break; - } - } - return $ret; + } // END - switch + } // END - if + + // Return it + return $GLOBALS[__FUNCTION__][$yn]; +} + +// Translates the "pool type" into human-readable +function translatePoolType ($type) { + // Return "translation" + return sprintf("{--POOL_TYPE_%s--}", $type); } // Translates the american decimal dot into a german comma -function TRANSLATE_COMMA ($dotted, $cut=true, $max=0) { +function translateComma ($dotted, $cut = true, $max = '0') { + // First, cast all to double, due to PHP changes + $dotted = (double) $dotted; + // Default is 3 you can change this in admin area "Misc -> Misc Options" - if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', "3"); + if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', 3); // Use from config is default $maxComma = getConfig('max_comma'); @@ -599,458 +370,227 @@ function TRANSLATE_COMMA ($dotted, $cut=true, $max=0) { if ($max > 0) $maxComma = $max; // Cut zeros off? - if (($cut) && ($max == 0)) { + if (($cut === true) && ($max == '0')) { // Test for commata if in cut-mode - $com = explode(".", $dotted); + $com = explode('.', $dotted); if (count($com) < 2) { // Don't display commatas even if there are none... ;-) - $maxComma = 0; - } + $maxComma = '0'; + } // END - if } // END - if // Debug log - //* DEBUG: */ DEBUG_LOG(__FUNCTION__, __LINE__, "dotted={$dotted},maxComma={$maxComma}"); // Translate it now - switch (GET_LANGUAGE()) { - case "de": - $dotted = number_format($dotted, $maxComma, ",", "."); - break; - - default: - $dotted = number_format($dotted, $maxComma, ".", ","); - break; - } - - // Return translated value - return $dotted; -} + $translated = $dotted; + switch (getLanguage()) { + case 'de': // German language + $translated = number_format($dotted, $maxComma, ',', '.'); + break; -// -function DEREFERER ($URL) { - // Don't de-refer our own links! - if (substr($URL, 0, strlen(URL)) != URL) { - // De-refer this link - $URL = "modules.php?module=loader&url=".encodeString(compileUriCode($URL)); - } // END - if + default: // All others + $translated = number_format($dotted, $maxComma, '.', ','); + break; + } // END - switch - // Return link - return $URL; + // Return translated value + //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dotted=' . $dotted . ',translated=' . $translated . ',maxComma=' . $maxComma); + return $translated; } // Translate Uni*-like gender to human-readable -function TRANSLATE_GENDER ($gender) { +function translateGender ($gender) { // Default - $ret = "!{$gender}!"; + $ret = '!' . $gender . '!'; // Male/female or company? switch ($gender) { - case "M": $ret = getMessage('GENDER_M'); break; - case "F": $ret = getMessage('GENDER_F'); break; - case "C": $ret = getMessage('GENDER_C'); break; + case 'M': // Male + case 'F': // Female + case 'C': // Company + $ret = sprintf("{--GENDER_%s--}", $gender); + break; + default: - // Log unknown gender - DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender)); + // Please report bugs on unknown genders + debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender)); break; - } + } // END - switch // Return translated gender return $ret; } -// -function FRAMETESTER ($URL) { - // Prepare frametester URL - $frametesterUrl = sprintf("%s/modules.php?module=frametester&url=%s", - URL, - encodeString(compileUriCode($URL)) - ); - return $frametesterUrl; -} +// "Translates" the user status +function translateUserStatus ($status) { + // Generate message depending on status + switch ($status) { + case 'UNCONFIRMED': + case 'CONFIRMED': + case 'LOCKED': + $ret = sprintf("{--ACCOUNT_STATUS_%s--}", $status); + break; -// -function SELECTION_COUNT ($array) { - $ret = 0; - if (is_array($array)) { - foreach ($array as $key => $selected) { - if (!empty($selected)) $ret++; - } - } - return $ret; -} -// -function IMG_CODE ($code, $type, $DATA, $uid) { - return "\"Code\""; -} -// -function TRANSLATE_STATUS ($status) { - switch ($status) - { - case "UNCONFIRMED": - case "CONFIRMED": - case "LOCKED": - $ret = getMessage(sprintf("ACCOUNT_%s", $status)); - break; - - case "": - case null: - $ret = getMessage('ACCOUNT_DELETED'); - break; - - default: - DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status)); - $ret = sprintf(getMessage('UNKNOWN_STATUS"'), $status); - break; - } + case '': + case null: + $ret = '{--ACCOUNT_STATUS_DELETED--}'; + break; + + default: + // Please report all unknown status + debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown status %s(%s) detected.", $status, gettype($status))); + break; + } // END - switch // Return it return $ret; } -// -function GET_LANGUAGE() { - // Set default return value to default language from config - $ret = constant('DEFAULT_LANG'); - - // Init variable - $lang = ""; - - // Is the variable set - if (REQUEST_ISSET_GET(('mx_lang'))) { - // Accept only first 2 chars - $lang = substr(REQUEST_GET('mx_lang'), 0, 2); - } elseif (isset($GLOBALS['cache_array']['language'])) { - // Use cached - $ret = $GLOBALS['cache_array']['language']; - } elseif (!empty($lang)) { - // Check if main language file does exist - if (FILE_READABLE(constant('PATH')."inc/language/".$lang.".php")) { - // Okay found, so let's update cookies - SET_LANGUAGE($lang); - } - } elseif (!isSessionVariableSet('mx_lang')) { - // Return stored value from cookie - $ret = get_session('mx_lang'); - - // Fixes a warning before the session has the mx_lang constant - if (empty($ret)) $ret = constant('DEFAULT_LANG'); - } - // Cache entry - $GLOBALS['cache_array']['language'] = $ret; +// "Translates" 'visible' and 'locked' to a CSS class +function translateMenuVisibleLocked ($content, $prefix = '') { + // Translate 'visible' and keep an eye on the prefix + switch ($content['visible']) { + // Should be visible + case 'Y': $content['visible_css'] = $prefix . 'menu_visible' ; break; + case 'N': $content['visible_css'] = $prefix . 'menu_invisible'; break; + default: + // Please report this + debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported visible value detected. content=
' . print_r($content, true) . '
'); + break; + } // END - switch - // Return value - return $ret; -} -// -function SET_LANGUAGE ($lang) { - // Accept only first 2 chars! - $lang = substr(SQL_ESCAPE(strip_tags($lang)), 0, 2); + // Translate 'locked' and keep an eye on the prefix + switch ($content['locked']) { + // Should be locked + case 'Y': $content['locked_css'] = $prefix . 'menu_locked' ; break; + case 'N': $content['locked_css'] = $prefix . 'menu_unlocked'; break; + default: + // Please report this + debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported locked value detected. content=
' . print_r($content, true) . '
'); + break; + } // END - switch - // Set cookie - set_session('mx_lang', $lang); + // Return the resulting array + return $content; } -// -function LOAD_EMAIL_TEMPLATE($template, $content=array(), $UID="0") { - global $DATA, $_CONFIG; - // Make sure all template names are lowercase! - $template = strtolower($template); - - // Default "nickname" if extension is not installed - $nick = "---"; - - // Prepare IP number and User Agent - $REMOTE_ADDR = GET_REMOTE_ADDR(); - $HTTP_USER_AGENT = GET_USER_AGENT(); - - // Default admin - $ADMIN = constant('MAIN_TITLE'); - - // Is the admin logged in? - if (IS_ADMIN()) { - // Get admin id - $aid = GET_CURRENT_ADMIN_ID(); - - // Load Admin data - $ADMIN = GET_ADMIN_EMAIL($aid); +// Generates an URL for the dereferer +function generateDerefererUrl ($URL) { + // Don't de-refer our own links! + if (substr($URL, 0, strlen(getUrl())) != getUrl()) { + // De-refer this link + $URL = '{%url=modules.php?module=loader&url=' . encodeString(compileUriCode($URL)) . '%}'; } // END - if - // Neutral email address is default - $email = constant('WEBMASTER'); - - // Expiration in a nice output format - if (getConfig('auto_purge') == 0) { - // Will never expire! - $EXPIRATION = getMessage('MAIL_WILL_NEVER_EXPIRE'); - } else { - // Create nice date string - $EXPIRATION = CREATE_FANCY_TIME(getConfig('auto_purge')); - } - - // Is content an array? - if (is_array($content)) { - // Add expiration to array, $EXPIRATION is now deprecated! - $content['expiration'] = $EXPIRATION; - } // END - if + // Return link + return $URL; +} - // Load user's data - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):UID={$UID},template={$template},content[]=".gettype($content)."
\n"; - if (($UID > 0) && (is_array($content))) { - // If nickname extension is installed, fetch nickname as well - if (EXT_IS_ACTIVE("nickname")) { - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):NICKNAME!
\n"; - // Load nickname - $result = SQL_QUERY_ESC("SELECT surname, family, gender, email, nickname FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1", - array(bigintval($UID)), __FUNCTION__, __LINE__); - } else { - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):NO-NICK!
\n"; - /// Load normal data - $result = SQL_QUERY_ESC("SELECT surname, family, gender, email FROM `{!_MYSQL_PREFIX!}_user_data` WHERE userid=%s LIMIT 1", - array(bigintval($UID)), __FUNCTION__, __LINE__); - } +// Generates an URL for the frametester +function generateFrametesterUrl ($URL) { + // Prepare frametester URL + $frametesterUrl = sprintf("{%%url=modules.php?module=frametester&url=%s%%}", + encodeString(compileUriCode($URL)) + ); - // Fetch and merge data - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):content()=".count($content)." - PRE
\n"; - $content = merge_array($content, SQL_FETCHARRAY($result)); - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):content()=".count($content)." - AFTER
\n"; + // Return the new URL + return $frametesterUrl; +} - // Free result - SQL_FREERESULT($result); +// Count entries from e.g. a selection box +function countSelection ($array) { + // Integrity check + if (!is_array($array)) { + // Not an array! + debug_report_bug(__FUNCTION__, __LINE__, 'No array provided.'); } // END - if - // Translate M to male or F to female if present - if (isset($content['gender'])) $content['gender'] = TRANSLATE_GENDER($content['gender']); + // Init count + $ret = '0'; - // Overwrite email from data if present - if (isset($content['email'])) $email = $content['email']; + // Count all entries + foreach ($array as $key => $selected) { + // Is it checked? + if (!empty($selected)) $ret++; + } // END - foreach - // Store email for some functions in global data array - $DATA['email'] = $email; + // Return counted selections + return $ret; +} - // Base directory - $BASE = sprintf("%stemplates/%s/emails/", constant('PATH'), GET_LANGUAGE()); +// Generates a timestamp (some wrapper for mktime()) +function makeTime ($hours, $minutes, $seconds, $stamp) { + // Extract day, month and year from given timestamp + $days = getDay($stamp); + $months = getMonth($stamp); + $years = getYear($stamp); - // Check for admin/guest/member templates - if (strpos($template, "admin_") > -1) { - // Admin template found - $FQFN = $BASE."admin/".$template.".tpl"; - } elseif (strpos($template, "guest_") > -1) { - // Guest template found - $FQFN = $BASE."guest/".$template.".tpl"; - } elseif (strpos($template, "member_") > -1) { - // Member template found - $FQFN = $BASE."member/".$template.".tpl"; - } else { - // Test for extension - $test = substr($template, 0, strpos($template, "_")); - if (EXT_IS_ACTIVE($test)) { - // Set extra path to extension's name - $FQFN = $BASE.$test."/".$template.".tpl"; - } else { - // No special filename - $FQFN = $BASE.$template.".tpl"; - } - } + // Create timestamp for wished time which depends on extracted date + return mktime( + $hours, + $minutes, + $seconds, + $months, + $days, + $years + ); +} - // Does the special template exists? - if (!FILE_READABLE($FQFN)) { - // Reset to default template - $FQFN = $BASE.$template.".tpl"; - } // END - if +// Redirects to an URL and if neccessarry extends it with own base URL +function redirectToUrl ($URL, $allowSpider = true) { + // Remove {%url= + if (substr($URL, 0, 6) == '{%url=') $URL = substr($URL, 6, -2); - // Now does the final template exists? - $newContent = ""; - if (FILE_READABLE($FQFN)) { - // The local file does exists so we load it. :) - $tmpl_file = READ_FILE($FQFN); - $tmpl_file = SQL_ESCAPE($tmpl_file); - - // Run code - $tmpl_file = "\$newContent = decodeEntities(\"".COMPILE_CODE($tmpl_file)."\");"; - eval($tmpl_file); - } elseif (!empty($template)) { - // Template file not found! - $newContent = "{--TEMPLATE_404--}: ".$template."
-{--TEMPLATE_CONTENT--} -
".print_r($content, true)."
-{--TEMPLATE_DATA--} -
".print_r($DATA, true)."
-

"; - - // Debug mode not active? Then remove the HTML tags - if (!isDebugModeEnabled()) $newContent = strip_tags($newContent); - } else { - // No template name supplied! - $newContent = getMessage('NO_TEMPLATE_SUPPLIED'); - } + // Compile out codes + eval('$URL = "' . compileRawCode(encodeUrl($URL)) . '";'); + + // Default 'rel' value is external, nofollow is evil from Google and hurts the Internet + $rel = ' rel="external"'; - // Is there some content? - if (empty($newContent)) { - // Compiling failed - $newContent = "Compiler error for template {$template}!\nUncompiled content:\n".$tmpl_file; - // Add last error if the required function exists - if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx."; + // Do we have internal or external URL? + if (substr($URL, 0, strlen(getUrl())) == getUrl()) { + // Own (=internal) URL + $rel = ''; } // END - if - // Remove content and data - unset($content); - unset($DATA); + // Three different ways to debug... + //* DEBUG: */ debug_report_bug(__FUNCTION__, __LINE__, sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL)); + //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL); + //* DEBUG: */ die($URL); - // Return compiled content - return COMPILE_CODE($newContent); -} -// -function MAKE_TIME ($H, $M, $S, $stamp) { - // Extract day, month and year from given timestamp - $DAY = date("d", $stamp); - $MONTH = date("m", $stamp); - $YEAR = date('Y', $stamp); + // Simple probe for bots/spiders from search engines + if ((isSpider()) && ($allowSpider === true)) { + // Set HTTP-Status + setHttpStatus('200 OK'); - // Create timestamp for wished time which depends on extracted date - return mktime($H, $M, $S, $MONTH, $DAY, $YEAR); -} -// -function LOAD_URL ($URL, $addUrlData=true) { - // Compile out URI codes - $URL = compileUriCode($URL); - - // Check if http(s):// is there - if ((substr($URL, 0, 7) != "http://") && (substr($URL, 0, 8) != "https://")) { - // Make all URLs full-qualified - $URL = "".$URL; - } + // Set content-type here to fix a missing array element + setContentType('text/html'); - // Get output buffer - //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL)); - //* DEBUG: */ DEBUG_LOG(__FUNCTION__, __LINE__, $URL); - $OUTPUT = ob_get_contents(); - - // Clear it only if there is content - if (!empty($OUTPUT)) { + // Output new location link as anchor + outputHtml('' . secureString($URL) . ''); + } elseif (!headers_sent()) { + // Clear output buffer clearOutputBuffer(); - } // END - if - // Add some data to URL if cookies are not accepted - if (((!defined('__COOKIES')) || (!constant('__COOKIES'))) && ($addUrlData)) $URL = ADD_URL_DATA($URL); + // Clear own output buffer + $GLOBALS['output'] = ''; - // Probe for bot from search engine - if ((eregi("spider", GET_USER_AGENT())) || (eregi("bot", GET_USER_AGENT()))) { - // Search engine bot detected so let's rewrite many chars for the link - $URL = htmlentities(strip_tags($URL), ENT_QUOTES); + // Set header + setHttpStatus('302 Found'); - // Output new location link as anchor - OUTPUT_HTML("".$URL.""); - } elseif (!headers_sent()) { // Load URL when headers are not sent - //* DEBUG: */ debug_report_bug("URL={$URL}"); - header ("Location: ".str_replace("&", "&", $URL)); + sendRawRedirect(doFinalCompilation(str_replace('&', '&', $URL), false)); } else { // Output error message - LOAD_INC("inc/header.php"); - LOAD_TEMPLATE("redirect_url", false, str_replace("&", "&", $URL)); - LOAD_INC("inc/footer.php"); + loadInclude('inc/header.php'); + loadTemplate('redirect_url', false, str_replace('&', '&', $URL)); + loadInclude('inc/footer.php'); } - exit; -} - -// Wrapper for LOAD_URL but URL comes from a configuration entry -function LOAD_CONFIGURED_URL ($configEntry) { - // Get the URL - $URL = getConfig($configEntry); - // Is this URL set? - if (is_null($URL)) { - // Then abort here - trigger_error(sprintf("Configuration entry %s is not set!", $configEntry)); - } // END - if - - // Load the URL - LOAD_URL($URL); + // Shut the mailer down here + shutdown(); } -// -function COMPILE_CODE ($code, $simple = false, $constants = true, $full = true) { - // Is the code a string? - if (!is_string($code)) { - // Silently return it - return $code; - } // END - if - - $ARRAY = $GLOBALS['security_chars']; - - // Select smaller set of chars to replace when we e.g. want to compile URLs - if (!$full) $ARRAY = $GLOBALS['url_chars']; - - // Compile constants - if ($constants) { - // BEFORE 0.2.1 : Language and data constants - // WITH 0.2.1+ : Only language constants - $code = str_replace('{--','".', str_replace('--}','."', $code)); - - // BEFORE 0.2.1 : Not used - // WITH 0.2.1+ : Data constants - $code = str_replace('{!','".', str_replace("!}", '."', $code)); - } // END - if - - // Compile QUOT and other non-HTML codes - foreach ($ARRAY['to'] as $k => $to) { - // Do the reversed thing as in inc/libs/security_functions.php - $code = str_replace($to, $ARRAY['from'][$k], $code); - } // END - foreach - - // But shall I keep simple quotes for later use? - if ($simple) $code = str_replace("'", '{QUOT}', $code); - - // Find $content[bla][blub] entries - @preg_match_all('/\$(content|DATA)((\[([a-zA-Z0-9-_]+)\])*)/', $code, $matches); - - // Are some matches found? - if ((count($matches) > 0) && (count($matches[0]) > 0)) { - // Replace all matches - $matchesFound = array(); - foreach ($matches[0] as $key => $match) { - // Fuzzy look has failed by default - $fuzzyFound = false; - - // Fuzzy look on match if already found - foreach ($matchesFound as $found => $set) { - // Get test part - $test = substr($found, 0, strlen($match)); - - // Does this entry exist? - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):found={$found},match={$match},set={$set}
\n"; - if ($test == $match) { - // Match found! - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):fuzzyFound!
\n"; - $fuzzyFound = true; - break; - } // END - if - } // END - foreach - - // Skip this entry? - if ($fuzzyFound) continue; - - // Take all string elements - if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_".$matches[4][$key]]))) { - // Replace it in the code - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):key={$key},match={$match}
\n"; - $newMatch = str_replace("[".$matches[4][$key]."]", "['".$matches[4][$key]."']", $match); - $code = str_replace($match, "\".".$newMatch.".\"", $code); - $matchesFound[$key."_".$matches[4][$key]] = 1; - $matchesFound[$match] = 1; - } elseif (!isset($matchesFound[$match])) { - // Not yet replaced! - //* DEBUG: */ print __FUNCTION__."(".__LINE__."):match={$match}
\n"; - $code = str_replace($match, "\".".$match.".\"", $code); - $matchesFound[$match] = 1; - } - } // END - foreach - } // END - if - - // Return compiled code - return $code; -} -// /************************************************************************ * * * Gaenderter Sortier-Algorythmus, $array wird nach dem Array (!) * @@ -1067,13 +607,13 @@ function COMPILE_CODE ($code, $simple = false, $constants = true, $full = true) * Sie, dass es doch nicht so schwer ist! :-) * * * ************************************************************************/ -function array_pk_sort (&$array, $a_sort, $primary_key = 0, $order = -1, $nums = false) { +function array_pk_sort (&$array, $a_sort, $primary_key = '0', $order = -1, $nums = false) { $dummy = $array; while ($primary_key < count($a_sort)) { foreach ($dummy[$a_sort[$primary_key]] as $key => $value) { foreach ($dummy[$a_sort[$primary_key]] as $key2 => $value2) { $match = false; - if (!$nums) { + if ($nums === false) { // Sort byte-by-byte (also numbers will be interpreted as chars! E.g.: "9" > "10") if (($key != $key2) && (strcmp(strtolower($dummy[$a_sort[$primary_key]][$key]), strtolower($dummy[$a_sort[$primary_key]][$key2])) == $order)) $match = true; } elseif ($key != $key2) { @@ -1102,560 +642,128 @@ function array_pk_sort (&$array, $a_sort, $primary_key = 0, $order = -1, $nums = $array = $dummy; } -// -function ADD_SELECTION ($type, $DEFAULT, $prefix="", $id="0") { - $OUT = ""; - - if ($type == "yn") { - // This is a yes/no selection only! - if ($id > 0) $prefix .= "[".$id."]"; - $OUT .= " \n"; - } - - switch ($type) { - case "day": // Day - for ($idx = 1; $idx < 32; $idx++) { - $OUT .= "\n"; - } - } else { - // Get current year and subtract the configured minimum age - $OUT .= "\n"; - // Calculate earliest year depending on extension version - if (GET_EXT_VERSION("other") >= "0.2.1") { - // Use configured minimum age - $YEAR = date('Y', time()) - getConfig('min_age'); - } else { - // Use fixed 16 years age - $YEAR = date('Y', time()) - 16; - } - - // Construct year selection list - for ($idx = $minYear; $idx <= $YEAR; $idx++) { - $OUT .= "