X-Git-Url: https://git.mxchange.org/?a=blobdiff_plain;f=src%2FNetwork%2Fray.cxx;h=e93dc3fc27079471d1fd251c23e50cdd7ab41d27;hb=0aabc112b4f586f94365ccf1e906d6e4fb78dc10;hp=917cd7545ecb18540857cec082ca436c318aa412;hpb=fa3cbdb2f8c978425ad3281bb4f1ec385ea61afb;p=flightgear.git

diff --git a/src/Network/ray.cxx b/src/Network/ray.cxx
index 917cd7545..e93dc3fc2 100644
--- a/src/Network/ray.cxx
+++ b/src/Network/ray.cxx
@@ -21,13 +21,12 @@
 // $Id$
 
 
+#include <simgear/constants.h>
 #include <simgear/debug/logstream.hxx>
-#include <simgear/math/fg_geodesy.hxx>
+#include <simgear/io/iochannel.hxx>
 
 #include <FDM/flight.hxx>
-#include <Time/fg_time.hxx>
 
-#include "iochannel.hxx"
 #include "ray.hxx"
 
 
@@ -46,11 +45,14 @@ FGRAY::~FGRAY() {
 }
 
 
-// Ray Woodworth's motion chair has between 3 and 5 axes installed.
+// Ray Woodworth (949) 262-9118 has a three axis motion chair.
+//
 // It expects +/- 5V signals for full scale.  In channel order, axes are:
 //	roll, pitch, yaw, sway, surge, heave
 // The drivers are capable of generating (in the same order)
-//	+/- 30deg, 30deg, 15deg, 12in, 12in, 12in
+//	+/- 30deg, 30deg, 30deg, 12in, 12in, 12in
+// The signs of the motion are such that positive volts gives
+//	head right, head back, feet right, body right, body back, body up
 //
 // In this code implementation, the voltage outputs are generated
 // using a ComputerBoards DDA06/Jr card and the associated Linux driver.
@@ -63,7 +65,7 @@ bool FGRAY::gen_message() {
     // cout << "generating RayWoodworth message" << endl;
     FGInterface *f = cur_fdm_state;
     int axis, subaxis;
-    const double fullscale[6] = { -0.8, -0.8, -0.25, /* radians */
+    const double fullscale[6] = { -0.5, -0.5, -0.5, /* radians */
 				  -0.3, -0.3, -0.15  /* meters */ };
 
     /* Figure out how big our timesteps are */
@@ -100,11 +102,13 @@ bool FGRAY::gen_message() {
 	}
 
 	/* Make sure the angles are reasonable onscale */
-	while ( ang_pos < -M_PI ) {
-		ang_pos += 2 * M_PI;
+ 	/* We use an asymmetric mapping so that the chair behaves
+ 	   reasonably when upside down.  Otherwise it oscillates. */
+ 	while ( ang_pos < -2*SGD_PI/3 ) {
+		ang_pos += 2 * SGD_PI;
 	}
-	while ( ang_pos > M_PI ) {
-		ang_pos -= 2 * M_PI;
+ 	while ( ang_pos >  4*SGD_PI/3 ) {
+		ang_pos -= 2 * SGD_PI;
 	}
 
 	/* Tell interested parties what the situation is */
@@ -127,20 +131,20 @@ bool FGRAY::gen_message() {
 
 	/* yaw */
 		/* Make sure that we walk through North cleanly */
-		if ( fabs ( ang_pos - chair_heading ) > M_PI )
+		if ( fabs ( ang_pos - chair_heading ) > SGD_PI )
 		{	/* Need to swing chair by 360 degrees */
 			if ( ang_pos < chair_heading )
-				chair_heading -= 2 * M_PI;
-			else	chair_heading += 2 * M_PI;
+				chair_heading -= 2 * SGD_PI;
+			else	chair_heading += 2 * SGD_PI;
 		}
 		/* Remove the chair heading from the true heading */
 		ang_pos -= chair_heading;
 		/* Wash out the error at 5 sec timeconstant because
 		   a standard rate turn is 3 deg/sec and the chair
-		   can represent 15 degrees full scale.  */
+ 		   can just about represent 30 degrees full scale.  */
 		chair_heading += ang_pos * dt * 0.2;
 		/* If they turn fast, at 90 deg error subtract 30 deg */
-		if ( fabs(ang_pos) > M_PI / 2 )
+		if ( fabs(ang_pos) > SGD_PI / 2 )
 			chair_heading += ang_pos / 3;
 
 	} else
@@ -174,8 +178,8 @@ bool FGRAY::gen_message() {
 		/* Scale to the hardware's full scale range */
 		propose /= fullscale [ subaxis ];
 		/* Use a sine shaped washout on all axes */
-		if ( propose < -M_PI / 2 ) *dac = 0x0000; else
-		if ( propose >  M_PI / 2 ) *dac = 0xFFFF; else
+		if ( propose < -SGD_PI / 2 ) *dac = 0x0000; else
+		if ( propose >  SGD_PI / 2 ) *dac = 0xFFFF; else
 		   *dac = (unsigned short) ( 32767 * 
 				( 1.0 + sin ( propose ) ) );
 	}
@@ -192,7 +196,7 @@ bool FGRAY::gen_message() {
 
 // parse RUL message
 bool FGRAY::parse_message() {
-    FG_LOG( FG_IO, FG_ALERT, "RAY input not supported" );
+    SG_LOG( SG_IO, SG_ALERT, "RAY input not supported" );
 
     return false;
 }
@@ -200,16 +204,16 @@ bool FGRAY::parse_message() {
 
 // process work for this port
 bool FGRAY::process() {
-    FGIOChannel *io = get_io_channel();
+    SGIOChannel *io = get_io_channel();
 
-    if ( get_direction() == out ) {
+    if ( get_direction() == SG_IO_OUT ) {
 	gen_message();
 	if ( ! io->write( buf, length ) ) {
-	    FG_LOG( FG_IO, FG_ALERT, "Error writing data." );
+	    SG_LOG( SG_IO, SG_ALERT, "Error writing data." );
 	    return false;
 	}
-    } else if ( get_direction() == in ) {
-	FG_LOG( FG_IO, FG_ALERT, "in direction not supported for RAY." );
+    } else if ( get_direction() == SG_IO_IN ) {
+	SG_LOG( SG_IO, SG_ALERT, "in direction not supported for RAY." );
 	return false;
     }