FG_LOG(FG_GENERAL, FG_INFO, "Ending BFI reinit");
}
-// BEGIN: kludge 2000-12-07
-// This is a kludge around a LaRCsim problem; see setAltitude()
-// for details.
-static int _altitude_countdown = 0;
-static double _requested_altitude = -9999;
-static bool _saved_freeze = false;
-static inline void _check_altitude ()
-{
- if (_altitude_countdown > 0) {
- _altitude_countdown--;
- if (_altitude_countdown == 0) {
- current_aircraft.fdm_state->set_Altitude(_requested_altitude);
- globals->set_freeze(_saved_freeze);
- }
- }
-}
-
-static int _lighting_countdown = 0;
-static inline void _check_lighting ()
-{
- if (_lighting_countdown > 0) {
- _lighting_countdown--;
- if (_lighting_countdown == 0)
- fgUpdateSkyAndLightingParams();
- }
-}
-// END: kludge
-
-
// BEGIN: kludge
// Allow the view to be set from two axes (i.e. a joystick hat)
// This needs to be in FGViewer itself, somehow.
FGBFI::init ()
{
FG_LOG(FG_GENERAL, FG_INFO, "Starting BFI init");
+
// Simulation
fgTie("/sim/aircraft-dir", getAircraftDir, setAircraftDir);
fgTie("/sim/time/gmt", getDateString, setDateString);
fgTie("/sim/time/gmt-string", getGMTString);
- // Position
-// fgTie("/position/latitude", getLatitude, setLatitude);
-// fgTie("/position/longitude", getLongitude, setLongitude);
-// fgTie("/position/altitude", getAltitude, setAltitude);
-// fgTie("/position/altitude-agl", getAGL);
-
// Orientation
-// fgTie("/orientation/heading", getHeading, setHeading);
fgTie("/orientation/heading-magnetic", getHeadingMag);
-// fgTie("/orientation/pitch", getPitch, setPitch);
-// fgTie("/orientation/roll", getRoll, setRoll);
// Engine
fgTie("/engines/engine0/rpm", getRPM);
fgTie("/engines/engine0/cht", getCHT);
fgTie("/engines/engine0/mp", getMP);
- // Velocities
-// fgTie("/velocities/airspeed", getAirspeed, setAirspeed);
-// fgTie("/velocities/side-slip", getSideSlip);
-// fgTie("/velocities/vertical-speed", getVerticalSpeed);
-// fgTie("/velocities/speed-north", getSpeedNorth);
-// fgTie("/velocities/speed-east", getSpeedEast);
-// fgTie("/velocities/speed-down", getSpeedDown);
-
// Autopilot
fgTie("/autopilot/locks/altitude", getAPAltitudeLock, setAPAltitudeLock);
fgTie("/autopilot/settings/altitude", getAPAltitude, setAPAltitude);
fgTie("/sim/view/axes/long", (double(*)())0, setViewAxisLong);
fgTie("/sim/view/axes/lat", (double(*)())0, setViewAxisLat);
- _altitude_countdown = 0;
- globals->set_freeze(_saved_freeze);
_needReinit = false;
FG_LOG(FG_GENERAL, FG_INFO, "Ending BFI init");
void
FGBFI::update ()
{
- _check_altitude();
- _check_lighting();
_set_view_from_axes();
if (_needReinit) {
reinit();
FGBFI::setLatitude (double latitude)
{
current_aircraft.fdm_state->set_Latitude(latitude * DEG_TO_RAD);
- fgUpdateSkyAndLightingParams();
- if (_lighting_countdown <= 0)
- _lighting_countdown = 5;
}
FGBFI::setLongitude (double longitude)
{
current_aircraft.fdm_state->set_Longitude(longitude * DEG_TO_RAD);
- fgUpdateSkyAndLightingParams();
- if (_lighting_countdown <= 0)
- _lighting_countdown = 5;
}
FGBFI::setAltitude (double altitude)
{
current_aircraft.fdm_state->set_Altitude(altitude);
-
- // 2000-12-07
- // This is an ugly kludge around a
- // LaRCsim problem; if the
- // requested altitude cannot be
- // set right away (because it's
- // below the last-calculated ground
- // level), pause FGFS, wait for
- // five frames, and then try again.
- if (_altitude_countdown <= 0 &&
- fabs(getAltitude() - altitude) > 5.0) {
- _altitude_countdown = 5;
- _requested_altitude = altitude;
- _saved_freeze = globals->get_freeze();
- globals->set_freeze(true);
- }
}
} else if ( arg == "--enable-mouse-pointer" ) {
fgSetString("/sim/startup/mouse-pointer", "enabled");
} else if ( arg == "--disable-freeze" ) {
- fgSetBool("/sim/freeze", false);
+ globals->set_freeze(false);
} else if ( arg == "--enable-freeze" ) {
- fgSetBool("/sim/freeze", true);
+ globals->set_freeze(true);
} else if ( arg == "--disable-anti-alias-hud" ) {
fgSetBool("/sim/hud/antialiased", false);
} else if ( arg == "--enable-anti-alias-hud" ) {
string name = assign.substr(0, pos);
string value = assign.substr(pos + 1);
fgSetString(name.c_str(), value);
- FG_LOG(FG_GENERAL, FG_INFO, "Setting default value of property "
- << name << " to \"" << value << '"');
+ // FG_LOG(FG_GENERAL, FG_INFO, "Setting default value of property "
+ // << name << " to \"" << value << '"');
// $$$ begin - added VS Renganathan, 14 Oct 2K
// for multi-window outside window imagery
} else if ( arg.find( "--view-offset=" ) != string::npos ) {