use strict;
my($faa_ils_file) = shift(@ARGV);
-my($arpt_file) = shift(@ARGV);
+my($dafift_arpt_file) = shift(@ARGV);
my($dafift_ils_file) = shift(@ARGV);
my($fgfs_ils_file) = shift(@ARGV);
die "Usage: $0 " .
"<faa_ils_file> <dafift_arpt_file> <dafift_ils_file> <fgfs_ils_file>\n"
- if !defined($faa_ils_file) || !defined($arpt_file)
+ if !defined($faa_ils_file) || !defined($dafift_arpt_file)
|| !defined($dafift_ils_file) || !defined($fgfs_ils_file);
my( %Airports );
my( %ILS );
-my( $record );
-my( $id, $rwy, $type );
-my( $has_dme, $has_gs, $has_loc, $has_im, $has_mm, $has_om );
-my( $dme_lon, $dme_lat, $dme_elev, $dme_bias );
-my( $gs_lon, $gs_lat, $gs_elev, $gs_angle );
-my( $loc_type, $loc_lon, $loc_lat, $loc_elev, $loc_freq, $loc_hdg, $loc_width,
- $loc_id );
-my( $im_lon, $im_lat, $mm_lon, $mm_lat, $om_lon, $om_lat );
+
+&load_dafift( $dafift_arpt_file, $dafift_ils_file );
+&load_faa( $faa_ils_file );
+&load_fgfs( $faa_ils_file );
+&write_result();
+
+exit;
########################################################################
# Process FAA data
########################################################################
-# Load the DAFIFT ils file
-
-my( $rec_type, $faa_id, $faa_date, $faa_apt_name, $faa_city, $faa_st,
- $faa_state, $faa_region, $id, $faa_len, $faa_wid, $faa_cat, $faa_owner,
- $faa_operator, $faa_bearing, $faa_magvar,
- $faa_loc_latd, $faa_loc_lats, $faa_loc_lond, $faa_loc_lons,
- $faa_stop_dist, $faa_app_dist,
- $faa_gs_type, $faa_gs_freq, $faa_gs_latd, $faa_gs_lats, $faa_gs_lond,
- $faa_gs_lons, $faa_gs_dist,
- $faa_im_type, $faa_im_latd, $faa_im_lats, $faa_im_lond, $faa_im_lons,
- $faa_im_dist,
- $faa_mm_type, $faa_mm_id, $faa_mm_name, $faa_mm_freq,
- $faa_mm_latd, $faa_mm_lats, $faa_mm_lond, $faa_mm_lons, $faa_mm_dist,
- $faa_om_type, $faa_om_id, $faa_om_name, $faa_om_freq,
- $faa_om_latd, $faa_om_lats, $faa_om_lond, $faa_om_lons, $faa_om_dist,
- $faa_om_backcourse);
-open( FAA_ILS, "<$faa_ils_file" ) || die "Cannot open $faa_ils_file\n";
-
-<FAA_ILS>; # skip header line
-
-while ( <FAA_ILS> ) {
- chomp;
- ( $rec_type, $faa_id, $rwy, $type, $faa_date, $faa_apt_name, $faa_city,
- $faa_st, $faa_state, $faa_region, $id, $faa_len, $faa_wid,
- $faa_cat, $faa_owner, $faa_operator, $faa_bearing, $faa_magvar,
- $loc_type, $loc_id, $loc_freq, $faa_loc_latd, $faa_loc_lats,
- $faa_loc_lond, $faa_loc_lons, $loc_width, $faa_stop_dist, $faa_app_dist,
- $faa_gs_type, $gs_angle, $faa_gs_freq, $faa_gs_latd, $faa_gs_lats,
- $faa_gs_lond, $faa_gs_lons, $faa_gs_dist, $gs_elev,
- $faa_im_type, $faa_im_latd, $faa_im_lats, $faa_im_lond, $faa_im_lons,
- $faa_im_dist,
- $faa_mm_type, $faa_mm_id, $faa_mm_name, $faa_mm_freq,
- $faa_mm_latd, $faa_mm_lats, $faa_mm_lond, $faa_mm_lons, $faa_mm_dist,
- $faa_om_type, $faa_om_id, $faa_om_name, $faa_om_freq,
- $faa_om_latd, $faa_om_lats, $faa_om_lond, $faa_om_lons,
- $faa_om_dist, $faa_om_backcourse
- )
- = $_ =~ m/^(.{4})(.{11})(.{3})(.{10})(.{10})(.{42})(.{26})(.{2})(.{20})(.{3})(.{4})(.{5})(.{4})(.{9})(.{50})(.{50})(.{3})(.{3})(.{15})(.{5})(.{6})(.{14})(.{11})(.{14})(.{11})(.{5})(.{5})(.{6})(.{15})(.{4})(.{6})(.{14})(.{11})(.{14})(.{11})(.{6})(.{7})(.{15})(.{14})(.{11})(.{14})(.{11})(.{6})(.{15})(.{2})(.{5})(.{3})(.{14})(.{11})(.{14})(.{11})(.{6})(.{15})(.{2})(.{5})(.{3})(.{14})(.{11})(.{14})(.{11})(.{6})(.{9})/;
-
- $loc_hdg = $faa_bearing + make_dmagvar($faa_magvar);
- $loc_lat = make_dcoord($faa_loc_lats) / 3600.0;
- $loc_lon = make_dcoord($faa_loc_lons) / 3600.0;
- $gs_lat = make_dcoord($faa_gs_lats) / 3600.0;
- $gs_lon = make_dcoord($faa_gs_lons) / 3600.0;
- $im_lat = make_dcoord($faa_im_lats) / 3600.0;
- $im_lon = make_dcoord($faa_im_lons) / 3600.0;
- $mm_lat = make_dcoord($faa_mm_lats) / 3600.0;
- $mm_lon = make_dcoord($faa_mm_lons) / 3600.0;
- $om_lat = make_dcoord($faa_om_lats) / 3600.0;
- $om_lon = make_dcoord($faa_om_lons) / 3600.0;
-
- # just hist the start of the next record, dump the current data
- $record = sprintf( "I ILS %-4s %-3s %06.2f %-4s %06.2f %10.6f %11.6f ",
- $id, $rwy,
- $loc_freq, $loc_id, $loc_hdg, $loc_lat, $loc_lon );
- $record .= sprintf( "%5d %5.2f %10.6f %11.6f ",
- $gs_elev, $gs_angle, $gs_lat, $gs_lon );
- $record .= sprintf( "%10.6f %11.6f ", $dme_lat, $dme_lon );
- $record .= sprintf( "%10.6f %11.6f ", $om_lat, $om_lon );
- $record .= sprintf( "%10.6f %11.6f ", $mm_lat, $mm_lon );
- $record .= sprintf( "%10.6f %11.6f ", $im_lat, $im_lon );
- if ( $rec_type eq "ILS1" && $ILS{$id . $rwy} eq "" ) {
- print "FAA Adding: $id - $rwy $faa_bearing, $faa_magvar - $loc_hdg \n";
- $ILS{$id . $rwy} = $record;
+sub load_faa() {
+ my( $file ) = shift;
+
+ open( FAA_ILS, "<$file" ) || die "Cannot open FAA data: $file\n";
+
+ <FAA_ILS>; # skip header line
+
+ while ( <FAA_ILS> ) {
+ chomp;
+
+ my ( $rec_type, $faa_id, $rwy, $type, $faa_date,
+ $faa_apt_name, $faa_city, $faa_st, $faa_state,
+ $faa_region, $id, $faa_len, $faa_wid, $faa_cat,
+ $faa_owner, $faa_operator, $faa_bearing, $faa_magvar,
+ $loc_type, $loc_id, $loc_freq, $faa_loc_latd,
+ $faa_loc_lats, $faa_loc_lond, $faa_loc_lons, $loc_width,
+ $faa_stop_dist, $faa_app_dist, $faa_gs_type, $gs_angle,
+ $faa_gs_freq, $faa_gs_latd, $faa_gs_lats, $faa_gs_lond,
+ $faa_gs_lons, $faa_gs_dist, $gs_elev, $faa_im_type,
+ $faa_im_latd, $faa_im_lats, $faa_im_lond, $faa_im_lons,
+ $faa_im_dist, $faa_mm_type, $faa_mm_id, $faa_mm_name,
+ $faa_mm_freq, $faa_mm_latd, $faa_mm_lats, $faa_mm_lond,
+ $faa_mm_lons, $faa_mm_dist, $faa_om_type, $faa_om_id,
+ $faa_om_name, $faa_om_freq, $faa_om_latd, $faa_om_lats,
+ $faa_om_lond, $faa_om_lons, $faa_om_dist,
+ $faa_om_backcourse, $faa_dme_channel, $faa_dme_latd,
+ $faa_dme_lats, $faa_dme_lond, $faa_dme_lons, $faa_dme_app_dist,
+ $faa_dme_stop_dist, $blank)
+ = $_ =~
+ m/^(.{4})(.{11})(.{3})(.{10})(.{10})(.{42})(.{26})(.{2})(.{20})(.{3})(.{4})(.{5})(.{4})(.{9})(.{50})(.{50})(.{3})(.{3})(.{15})(.{5})(.{6})(.{14})(.{11})(.{14})(.{11})(.{5})(.{5})(.{6})(.{15})(.{4})(.{6})(.{14})(.{11})(.{14})(.{11})(.{6})(.{7})(.{15})(.{14})(.{11})(.{14})(.{11})(.{6})(.{15})(.{2})(.{5})(.{3})(.{14})(.{11})(.{14})(.{11})(.{6})(.{15})(.{2})(.{5})(.{3})(.{14})(.{11})(.{14})(.{11})(.{6})(.{9})(.{4})(.{14})(.{11})(.{14})(.{11})(.{6})(.{5})(.{34})/;
+
+ $loc_id =~ s/-//;
+ my( $loc_hdg ) = $faa_bearing + make_dmagvar($faa_magvar);
+ my( $loc_lat ) = make_dcoord($faa_loc_lats) / 3600.0;
+ my( $loc_lon ) = make_dcoord($faa_loc_lons) / 3600.0;
+ my( $gs_lat ) = make_dcoord($faa_gs_lats) / 3600.0;
+ my( $gs_lon ) = make_dcoord($faa_gs_lons) / 3600.0;
+ my( $im_lat ) = make_dcoord($faa_im_lats) / 3600.0;
+ my( $im_lon ) = make_dcoord($faa_im_lons) / 3600.0;
+ my( $mm_lat ) = make_dcoord($faa_mm_lats) / 3600.0;
+ my( $mm_lon ) = make_dcoord($faa_mm_lons) / 3600.0;
+ my( $om_lat ) = make_dcoord($faa_om_lats) / 3600.0;
+ my( $om_lon ) = make_dcoord($faa_om_lons) / 3600.0;
+ my( $dme_lat ) = make_dcoord($faa_dme_lats) / 3600.0;
+ my( $dme_lon ) = make_dcoord($faa_dme_lons) / 3600.0;
+
+ if ( $rec_type eq "ILS1" ) {
+ if ( $ILS{$id . $rwy} eq "" ) {
+ print "FAA adding: $id - $rwy\n";
+ add_record( $id, $rwy, $loc_freq, $loc_id, $loc_hdg, $loc_lat,
+ $loc_lon, $gs_elev, $gs_angle, $gs_lat, $gs_lon,
+ $dme_lat, $dme_lon, $om_lat, $om_lon, $mm_lat,
+ $mm_lon, $im_lat, $im_lon );
+ }
+ }
}
}
# Process DAFIFT data
########################################################################
-# Load the DAFIFT airport file
+sub load_dafift() {
+ my( $arpt_file ) = shift;
+ my( $ils_file ) = shift;
-open( ARPT, "<$arpt_file" ) || die "Cannot open $arpt_file\n";
+ my( $record );
-<ARPT>; # skip header line
+ my( $id, $rwy, $type );
+ my( $has_dme, $has_gs, $has_loc, $has_im, $has_mm, $has_om );
+ my( $dme_lon, $dme_lat, $dme_elev, $dme_bias );
+ my( $gs_lon, $gs_lat, $gs_elev, $gs_angle );
+ my( $loc_type, $loc_lon, $loc_lat, $loc_elev, $loc_freq, $loc_hdg,
+ $loc_width, $loc_id );
+ my( $im_lon, $im_lat, $mm_lon, $mm_lat, $om_lon, $om_lat );
-while ( <ARPT> ) {
- chomp;
- my(@F) = split(/\t/);
- my($icao) = $F[3];
- if ( length($icao) < 3 ) {
- if ( length( $F[4] ) >= 3 ) {
- $icao = $F[4];
- } else {
- $icao = "[none]";
- }
- }
- $Airports{$F[0]} = $icao;
- # print "$F[0] - $icao\n";
-}
+ # load airport file so we can lookup ICAO from internal ID
+ open( ARPT, "<$arpt_file" ) || die "Cannot open DAFIFT: $arpt_file\n";
-# Load the DAFIFT ils file
+ <ARPT>; # skip header line
-my( $last_id, $last_rwy ) = ("", "");
-
-open( DAFIFT_ILS, "<$dafift_ils_file" ) || die "Cannot open $dafift_ils_file\n";
-
-<DAFIFT_ILS>; # skip header line
-
-while ( <DAFIFT_ILS> ) {
- chomp;
- my @F = split(/\t/);
- $id = $F[0];
- $rwy = $F[1];
- if ( $last_id ne "" && ($last_id ne $id || $last_rwy ne $rwy) ) {
- # just hist the start of the next record, dump the current data
- $record
- = sprintf( "I ILS %-4s %-3s %06.2f %-4s %06.2f %10.6f %11.6f ",
- $Airports{$last_id}, $last_rwy,
- $loc_freq, $loc_id, $loc_hdg, $loc_lat, $loc_lon );
- if ( $has_gs ) {
- $record .= sprintf( "%5d %5.2f %10.6f %11.6f ",
- $gs_elev, $gs_angle, $gs_lat, $gs_lon );
- } else {
- $record .= sprintf( "%5d %5.2f %10.6f %11.6f ", 0, 0, 0, 0 );
+ while ( <ARPT> ) {
+ chomp;
+ my(@F) = split(/\t/);
+ my($icao) = $F[3];
+ if ( length($icao) < 3 ) {
+ if ( length( $F[4] ) >= 3 ) {
+ $icao = $F[4];
+ } else {
+ $icao = "[none]";
+ }
}
- if ( $has_dme ) {
- $record .= sprintf( "%10.6f %11.6f ", $dme_lat, $dme_lon );
- } else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
- }
- if ( $has_om ) {
- $record .= sprintf( "%10.6f %11.6f ", $om_lat, $om_lon );
- } else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
- }
- if ( $has_mm ) {
- $record .= sprintf( "%10.6f %11.6f ", $mm_lat, $mm_lon );
- } else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
- }
- if ( $has_im ) {
- $record .= sprintf( "%10.6f %11.6f ", $im_lat, $im_lon );
- } else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
- }
- if ( $ILS{$Airports{$last_id} . $last_rwy} eq "" ) {
- print "DAFIFT Adding: $Airports{$last_id} - $last_rwy\n";
- $ILS{$Airports{$last_id} . $last_rwy} = $record;
- }
- $has_dme = 0;
- $has_gs = 0;
- $has_loc = 0;
- $has_im = 0;
- $has_mm = 0;
- $has_om = 0;
+ $Airports{$F[0]} = $icao;
+ # print "$F[0] - $icao\n";
}
- $type = $F[2];
- if ( $type eq "D" ) {
- # DME entry
- $has_dme = 1;
- $dme_lon = make_dcoord( $F[16] );
- $dme_lat = make_dcoord( $F[14] );
- $dme_elev = $F[10];
- if ( $dme_elev !~ m/\d/ ) {
- $dme_elev = "";
- } else {
- $dme_elev += 0;
- }
- $dme_bias = $F[27];
- # print "$id DME $dme_lon $dme_lat $dme_elev $dme_bias\n";
- } elsif ( $type eq "G" ) {
- # GlideSlope entry
- $has_gs = 1;
- $gs_lon = make_dcoord( $F[16] );
- $gs_lat = make_dcoord( $F[14] );
- $gs_elev = $F[10];
- if ( $gs_elev !~ m/\d/ ) {
- $gs_elev = "";
- } else {
- $gs_elev += 0;
- }
- $gs_angle = $F[7];
- # print "$id GS $gs_lon $gs_lat $gs_elev $gs_angle\n";
- } elsif ( $type eq "Z" ) {
- # Localizer entry
- $has_loc = 1;
- $loc_lon = make_dcoord( $F[16] );
- $loc_lat = make_dcoord( $F[14] );
- $loc_elev = $F[10];
- if ( $loc_elev !~ m/\d/ ) {
- $loc_elev = "";
- } else {
- $loc_elev += 0;
+
+ # Load the DAFIFT ils file
+
+ my( $last_id, $last_rwy ) = ("", "");
+
+ open( DAFIFT_ILS, "<$ils_file" ) || die "Cannot open DAFIFT: $ils_file\n";
+
+ <DAFIFT_ILS>; # skip header line
+
+ while ( <DAFIFT_ILS> ) {
+ chomp;
+ my @F = split(/\t/);
+ $id = $F[0];
+ $rwy = $F[1];
+
+ if ( $last_id ne "" && ($last_id ne $id || $last_rwy ne $rwy) ) {
+ # just hist the start of the next record, dump the current data
+
+ if ( ! $has_gs ) {
+ ( $gs_elev, $gs_angle, $gs_lat, $gs_lon ) = ( 0, 0, 0, 0 );
+ }
+ if ( ! $has_dme ) {
+ ( $dme_lat, $dme_lon ) = ( 0, 0 );
+ }
+ if ( ! $has_om ) {
+ ( $om_lat, $om_lon ) = ( 0, 0 );
+ }
+ if ( ! $has_mm ) {
+ ( $mm_lat, $mm_lon ) = ( 0, 0 );
+ }
+ if ( ! $has_im ) {
+ ( $im_lat, $im_lon ) = ( 0, 0 );
+ }
+ if ( $ILS{$Airports{$last_id} . $last_rwy} eq "" ) {
+ print "DAFIFT adding: $Airports{$last_id} - $last_rwy\n";
+ add_record( $Airports{$last_id}, $last_rwy, $loc_freq,
+ $loc_id, $loc_hdg, $loc_lat, $loc_lon,
+ $gs_elev, $gs_angle, $gs_lat, $gs_lon,
+ $dme_lat, $dme_lon, $om_lat, $om_lon, $mm_lat,
+ $mm_lon, $im_lat, $im_lon );
+ }
+
+ $has_dme = 0;
+ $has_gs = 0;
+ $has_loc = 0;
+ $has_im = 0;
+ $has_mm = 0;
+ $has_om = 0;
}
- ($loc_freq) = $F[5] =~ m/(\d\d\d\d\d\d)/;
- $loc_freq /= 1000.0;
- my( $magvar ) = make_dmagvar( $F[22] );
- # print "mag var = $F[22] (" . $magvar . ")\n";
- $loc_hdg = $F[24] + make_dmagvar( $F[22] );
- $loc_width = $F[25];
- $loc_id = $F[18];
- # print "$id LOC $loc_lon $loc_lat $loc_elev $loc_freq $loc_hdg $loc_width\n";
- } elsif ( $type eq "I" ) {
- # Inner marker entry
- $has_im = 1;
- $im_lon = make_dcoord( $F[16] );
- $im_lat = make_dcoord( $F[14] );
- # print "$id IM $im_lon $im_lat\n";
- } elsif ( $type eq "M" ) {
- # Middle marker entry
- $has_mm = 1;
- $mm_lon = make_dcoord( $F[16] );
- $mm_lat = make_dcoord( $F[14] );
- # print "$id MM $mm_lon $mm_lat\n";
- } elsif ( $type eq "O" ) {
- # Outer marker entry
- $has_om = 1;
- $om_lon = make_dcoord( $F[16] );
- $om_lat = make_dcoord( $F[14] );
- # print "$id OM $om_lon $om_lat\n";
- }
- $last_id = $id;
- $last_rwy = $rwy;
- # printf("%-5s %10.6f %11.6f\n", $F[0], $F[14], $F[16]);
-}
+ $type = $F[2];
+ if ( $type eq "D" ) {
+ # DME entry
+ $has_dme = 1;
+ $dme_lon = make_dcoord( $F[16] );
+ $dme_lat = make_dcoord( $F[14] );
+ $dme_elev = $F[10];
+ if ( $dme_elev !~ m/\d/ ) {
+ $dme_elev = "";
+ } else {
+ $dme_elev += 0;
+ }
+ $dme_bias = $F[27];
+ # print "$id DME $dme_lon $dme_lat $dme_elev $dme_bias\n";
+ } elsif ( $type eq "G" ) {
+ # GlideSlope entry
+ $has_gs = 1;
+ $gs_lon = make_dcoord( $F[16] );
+ $gs_lat = make_dcoord( $F[14] );
+ $gs_elev = $F[10];
+ if ( $gs_elev !~ m/\d/ ) {
+ $gs_elev = "";
+ } else {
+ $gs_elev += 0;
+ }
+ $gs_angle = $F[7];
+ # print "$id GS $gs_lon $gs_lat $gs_elev $gs_angle\n";
+ } elsif ( $type eq "Z" ) {
+ # Localizer entry
+ $has_loc = 1;
+ $loc_lon = make_dcoord( $F[16] );
+ $loc_lat = make_dcoord( $F[14] );
+ $loc_elev = $F[10];
+ if ( $loc_elev !~ m/\d/ ) {
+ $loc_elev = "";
+ } else {
+ $loc_elev += 0;
+ }
+ ($loc_freq) = $F[5] =~ m/(\d\d\d\d\d\d)/;
+ $loc_freq /= 1000.0;
+ my( $magvar ) = make_dmagvar( $F[22] );
+ # print "mag var = $F[22] (" . $magvar . ")\n";
+ $loc_hdg = $F[24] + make_dmagvar( $F[22] );
+ $loc_width = $F[25];
+ $loc_id = $F[18];
+ # print "$id LOC $loc_lon $loc_lat $loc_elev $loc_freq $loc_hdg $loc_width\n";
+ } elsif ( $type eq "I" ) {
+ # Inner marker entry
+ $has_im = 1;
+ $im_lon = make_dcoord( $F[16] );
+ $im_lat = make_dcoord( $F[14] );
+ # print "$id IM $im_lon $im_lat\n";
+ } elsif ( $type eq "M" ) {
+ # Middle marker entry
+ $has_mm = 1;
+ $mm_lon = make_dcoord( $F[16] );
+ $mm_lat = make_dcoord( $F[14] );
+ # print "$id MM $mm_lon $mm_lat\n";
+ } elsif ( $type eq "O" ) {
+ # Outer marker entry
+ $has_om = 1;
+ $om_lon = make_dcoord( $F[16] );
+ $om_lat = make_dcoord( $F[14] );
+ # print "$id OM $om_lon $om_lat\n";
+ }
-$record = sprintf( "I ILS %-4s %-3s %06.2f %-4s %06.2f %10.6f %11.6f ",
- $Airports{$last_id}, $last_rwy,
- $loc_freq, $loc_id, $loc_hdg, $loc_lat, $loc_lon );
-if ( $has_gs ) {
- $record .= sprintf( "%5d %5.2f %10.6f %11.6f ",
- $gs_elev, $gs_angle, $gs_lat, $gs_lon );
-} else {
- $record .= sprintf( "%5d %5.2f %10.6f %11.6f ", 0, 0, 0, 0 );
-}
-if ( $has_dme ) {
- $record .= sprintf( "%10.6f %11.6f ", $dme_lat, $dme_lon );
-} else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
-}
-if ( $has_om ) {
- $record .= sprintf( "%10.6f %11.6f ", $om_lat, $om_lon );
-} else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
-}
-if ( $has_mm ) {
- $record .= sprintf( "%10.6f %11.6f ", $mm_lat, $mm_lon );
-} else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
-}
-if ( $has_im ) {
- $record .= sprintf( "%10.6f %11.6f ", $im_lat, $im_lon );
-} else {
- $record .= sprintf( "%10.6f %11.6f ", 0, 0 );
-}
+ $last_id = $id;
+ $last_rwy = $rwy;
+ # printf("%-5s %10.6f %11.6f\n", $F[0], $F[14], $F[16]);
+ }
-if ( $ILS{$Airports{$last_id} . $last_rwy} eq "" ) {
- print "DAFIFT Adding: $Airports{$last_id} - $last_rwy\n";
- $ILS{$Airports{$last_id} . $last_rwy} = $record;
+ if ( ! $has_gs ) {
+ ( $gs_elev, $gs_angle, $gs_lat, $gs_lon ) = ( 0, 0, 0, 0 );
+ }
+ if ( ! $has_dme ) {
+ ( $dme_lat, $dme_lon ) = ( 0, 0 );
+ }
+ if ( ! $has_om ) {
+ ( $om_lat, $om_lon ) = ( 0, 0 );
+ }
+ if ( ! $has_mm ) {
+ ( $mm_lat, $mm_lon ) = ( 0, 0 );
+ }
+ if ( ! $has_im ) {
+ ( $im_lat, $im_lon ) = ( 0, 0 );
+ }
+ if ( $ILS{$Airports{$last_id} . $last_rwy} eq "" ) {
+ print "DAFIFT adding (last): $Airports{$last_id} - $last_rwy\n";
+ add_record( $Airports{$last_id}, $last_rwy, $loc_freq,
+ $loc_id, $loc_hdg, $loc_lat, $loc_lon,
+ $gs_elev, $gs_angle, $gs_lat, $gs_lon,
+ $dme_lat, $dme_lon, $om_lat, $om_lon, $mm_lat,
+ $mm_lon, $im_lat, $im_lon );
+ }
}
# Process FlightGear ILS data
########################################################################
-# Load the FlightGear ils file and fill in any missing ILS approachs
+sub load_fgfs() {
+ my( $ils_file ) = shift;
+
-open( FGILS, "zcat $fgfs_ils_file|" ) || die "Cannot open $fgfs_ils_file\n";
+ open( FGILS, "zcat $ils_file|" ) || die "Cannot open FGFS: $ils_file\n";
-<FGILS>; # skip header line
+ <FGILS>; # skip header line
-while ( <FGILS> ) {
- chomp;
- if ( ! m/\[End\]/ && length($_) > 1 ) {
- # print "$_\n";
- my( $type_code, $type_name, $icao, $rwy, $loc_freq, $loc_id, $loc_hdg,
- $loc_lat, $loc_lon, $gs_elev, $gs_angle, $gs_lat, $gs_lon,
- $dme_lat, $dme_lon, $om_lat, $om_lon, $mm_lat, $mm_lon,
- $im_lat, $im_lon ) = split(/\s+/);
- if ( $ILS{$icao . $rwy} eq "" ) {
- print "X-Plane Adding: $icao $rwy\n";
- $ILS{$icao . $rwy} = $_;
+ while ( <FGILS> ) {
+ chomp;
+ if ( ! m/\[End\]/ && length($_) > 1 ) {
+ # print "$_\n";
+ my( $type_code, $type_name, $icao, $rwy, $loc_freq, $loc_id,
+ $loc_hdg, $loc_lat, $loc_lon, $gs_elev, $gs_angle, $gs_lat,
+ $gs_lon, $dme_lat, $dme_lon, $om_lat, $om_lon, $mm_lat, $mm_lon,
+ $im_lat, $im_lon ) = split(/\s+/);
+ if ( $ILS{$icao . $rwy} eq "" ) {
+ print "FGFS adding: $icao $rwy\n";
+ $ILS{$icao . $rwy} = $_;
+ }
}
}
}
-# dump out the final results
-print "// FlightGear ILS data, generated from DAFIFT ARPT/ILS.TXT\n";
-my($key);
-foreach $key ( sort (keys %ILS) ) {
- print "$ILS{$key}\n";
+########################################################################
+# Write out the accumulated combined result
+########################################################################
+
+sub write_result() {
+ # dump out the final results
+ print "// FlightGear ILS data, generated from DAFIFT ARPT/ILS.TXT\n";
+ my($key);
+ foreach $key ( sort (keys %ILS) ) {
+ print "$ILS{$key}\n";
+ }
+ print "[End]\n";
+}
+
+
+########################################################################
+# Utility functions
+########################################################################
+
+
+# add a record to the master list
+
+sub add_record() {
+ my( $apt_id ) = shift;
+ my( $rwy ) = shift;
+ my( $loc_freq ) = shift;
+ my( $loc_id ) = shift;
+ my( $loc_hdg ) = shift;
+ my( $loc_lat ) = shift;
+ my( $loc_lon ) = shift;
+ my( $gs_elev ) = shift;
+ my( $gs_angle ) = shift;
+ my( $gs_lat ) = shift;
+ my( $gs_lon ) = shift;
+ my( $dme_lat ) = shift;
+ my( $dme_lon ) = shift;
+ my( $om_lat ) = shift;
+ my( $om_lon ) = shift;
+ my( $mm_lat ) = shift;
+ my( $mm_lon ) = shift;
+ my( $im_lat ) = shift;
+ my( $im_lon ) = shift;
+
+ my( $record );
+ $record = sprintf( "I ILS %-4s %-3s %06.2f %-4s %06.2f %10.6f %11.6f ",
+ $apt_id, $rwy,
+ $loc_freq, $loc_id, $loc_hdg, $loc_lat, $loc_lon );
+ $record .= sprintf( "%5d %5.2f %10.6f %11.6f ",
+ $gs_elev, $gs_angle, $gs_lat, $gs_lon );
+ $record .= sprintf( "%10.6f %11.6f ", $dme_lat, $dme_lon );
+ $record .= sprintf( "%10.6f %11.6f ", $om_lat, $om_lon );
+ $record .= sprintf( "%10.6f %11.6f ", $mm_lat, $mm_lon );
+ $record .= sprintf( "%10.6f %11.6f ", $im_lat, $im_lon );
+
+ if ( $ILS{$apt_id . $rwy} eq "" ) {
+ print "Adding (common): $apt_id - $rwy\n";
+ $ILS{$apt_id . $rwy} = $record;
+ }
}
-print "[End]\n";
+# convert a lon/lat coordinate in various formats to signed decimal
+
sub make_dcoord() {
my($coord) = shift;
my( $dir, $deg, $min, $sec );
$value = -$value;
}
} elsif ( $coord =~ m/[EW]$/ ) {
- ($value, $dir) = m/(\d{6}\.\d{3})(.)/;
+ ($value, $dir) = $coord =~ m/(\d{6}\.\d{3})(.)/;
if ( $value eq "W" ) {
$value = -$value;
}
} elsif ( $coord =~ m/[NS]$/ ) {
- ($value, $dir) = m/(\d{6}\.\d{3})(.)/;
+ ($value, $dir) = $coord =~ m/(\d{6}\.\d{3})(.)/;
if ( $value eq "S" ) {
$value = -$value;
}
return $value;
}
+# convert a magnetic variation in various formats to signed decimal
+
sub make_dmagvar() {
my( $coord ) = shift;
my( $value );
return $value;
}
-
-# end of dafif2fix.pl
projects / flightgear.git / commitdiff