// If !_prev_display, the radio had been detuned for a while and our
// "transmission" variable was lost when we were de-instantiated.
int rslt = GenTransmission(!_prev_display, attention);
+ TreeOut(msg_OK);
if (rslt || volume != old_volume) {
//cout << "ATIS calling ATC::render volume: " << volume << endl;
Render(transmission, volume, refname, true);
const int ATIS_interval(60*minute);
#endif
+// FIXME: This is heuristic. It gets the right answer for
+// more than 90% of the world's airports, which is a lot
+// better than nothing ... but it's not 100%.
+// We know "most" of the world uses millibars,
+// but the US, Canada and *some* other places use inches of mercury,
+// but (a) we have not implemented a reliable method of
+// ascertaining which airports are in the US, let alone
+// (b) ascertaining which other places use inches.
+//
+int Apt_US_CA(const string id) {
+// Assume all IDs have length 3 or 4.
+// No counterexamples have been seen.
+ if (id.length() == 4) {
+ if (id.substr(0,1) == "K") return 1;
+ if (id.substr(0,2) == "CY") return 1;
+ }
+ for (string::const_iterator ptr = id.begin(); ptr != id.end(); ptr++) {
+ if (isdigit(*ptr)) return 1;
+ }
+ return 0;
+}
+
// Generate the actual broadcast ATIS transmission.
// Regen means regenerate the /current/ transmission.
// Special means generate a new transmission, with a new sequence.
transmission = "";
- if (ident.substr(0,2) == "EG") {
+ int US_CA = Apt_US_CA(ident);
+
+ if (!US_CA) {
// UK CAA radiotelephony manual indicates ATIS transmissions start
// with "This is ..."
transmission += This_is + " ";
snprintf(buf, bs, "/environment/clouds/layer[%i]/elevation-ft", layer);
double ceiling = int(fgGetDouble(buf) - _geod.getElevationFt());
if (ceiling > 12000) continue;
- if (coverage == scattered) {
- if (!did_some) transmission += " " + Sky_condition + ": ";
- did_some++;
+
+// BEWARE: At the present time, the environment system has no
+// way (so far as I know) to represent a "thin broken" or
+// "thin overcast" layer. If/when such things are implemented
+// in the environment system, code will have to be written here
+// to handle them.
+
+// First, do the prefix if any:
+ if (coverage == scattered || coverage == few) {
+ if (!did_some) {
+ transmission += " " + Sky_condition + ": ";
+ did_some++;
+ }
} else /* must be a ceiling */ if (!did_ceiling) {
transmission += " " + Ceiling + ": ";
did_ceiling++;
did_some++;
} else {
- transmission += " ";
+ transmission += " "; // no prefix required
}
int cig00 = int(SGMiscd::round(ceiling/100)); // hundreds of feet
if (cig00) {
int cig000 = cig00/10;
cig00 -= cig000*10; // just the hundreds digit
if (cig000) {
- snprintf(buf, bs, "%i", cig000);
- transmission += ConvertNumToSpokenDigits(buf);
- transmission += " " + thousand + " ";
+ snprintf(buf, bs, "%i", cig000);
+ transmission += ConvertNumToSpokenDigits(buf);
+ transmission += " " + thousand + " ";
}
if (cig00) {
- snprintf(buf, bs, "%i", cig00);
- transmission += ConvertNumToSpokenDigits(buf);
- transmission += " " + hundred + " ";
+ snprintf(buf, bs, "%i", cig00);
+ transmission += ConvertNumToSpokenDigits(buf);
+ transmission += " " + hundred + " ";
}
} else {
// Should this be "sky obscured?"
}
transmission += coverage + BRK;
}
+ if (!did_some) transmission += " " + Sky + " " + clear + BRK;
transmission += Temperature + ": ";
double Tsl = fgGetDouble("/environment/temperature-sea-level-degc");
}
snprintf(buf, bs, "%i", abs(temp));
transmission += ConvertNumToSpokenDigits(buf);
- transmission += " " + Celsius;
+ if (US_CA) transmission += " " + Celsius;
transmission += " " + dewpoint + " ";
double dpsl = fgGetDouble("/environment/dewpoint-sea-level-degc");
temp = int(SGMiscd::round(FGAtmo().fake_dp_vs_a_us(dpsl, _geod.getElevationFt())));
}
snprintf(buf, bs, "%i", abs(temp));
transmission += ConvertNumToSpokenDigits(buf);
- transmission += " " + Celsius + BRK;
+ if (US_CA) transmission += " " + Celsius;
+ transmission += BRK;
transmission += Visibility + ": ";
double visibility = fgGetDouble("/environment/config/boundary/entry[0]/visibility-m");
}
transmission += BRK;
- transmission += Altimeter + ": ";
double myQNH;
double Psl = fgGetDouble("/environment/pressure-sea-level-inhg");
{
#endif
myQNH = FGAtmo().QNH(_geod.getElevationM(), press);
}
- if(ident.substr(0,2) == "EG" && fgGetBool("/sim/atc/use-millibars")) {
- // Convert to millibars for the UK!
+
+// Convert to millibars for most of the world (not US, not CA)
+ if((!US_CA) || fgGetBool("/sim/atc/use-millibars")) {
+ transmission += QNH + ": ";
myQNH /= mbar;
if (myQNH > 1000) myQNH -= 1000; // drop high digit
snprintf(buf, bs, "%03.0f", myQNH);
+ transmission += ConvertNumToSpokenDigits(buf) + " " + millibars + BRK;
} else {
- myQNH /= inHg;
- myQNH *= 100.; // shift two decimal places
- snprintf(buf, bs, "%04.0f", myQNH);
+ transmission += Altimeter + ": ";
+ double asetting = myQNH / inHg; // use inches of mercury
+ asetting *= 100.; // shift two decimal places
+ snprintf(buf, bs, "%04.0f", asetting);
+ transmission += ConvertNumToSpokenDigits(buf) + BRK;
}
- transmission += ConvertNumToSpokenDigits(buf) + BRK;
if (_type == ATIS /* as opposed to AWOS */) {
const FGAirport* apt = fgFindAirportID(ident);
transmission += phonetic_seq_string;
transmission += "... " + BRK + PAUSE + PAUSE;
}
-#ifdef ATIS_TEST
- cout << "**** ATIS active on:";
-#endif
- for (map<string,int>::iterator act = active_on.begin(); act != active_on.end(); act++){
- string prop = "/instrumentation/" + act->first + "/atis";
- globals->get_props()->setStringValue(prop.c_str(),
- ("<pre>\n" + transmission + "</pre>\n").c_str());
-#ifdef ATIS_TEST
- cout << " " << prop;
-#endif
- }
-#ifdef ATIS_TEST
- cout << " ****" << endl;
- cout << transmission << endl;
-// Note that even if we aren't outputting the transmission
-// on stdout, you can still see it by pointing a web browser
-// at the property tree. The second comm radio is:
-// http://localhost:5400/instrumentation/comm[1]
-#endif
-
-// Take the previous English-looking string and munge it to
+ transmission_readable = transmission;
+// Take the previous readable string and munge it to
// be relatively-more acceptable to the primitive tts system.
// Note that : ; and . are among the token-delimeters recognized
// by the tts system.
}
return 1;
}
+
+// Put the transmission into the property tree,
+// possibly in multiple places if multiple radios
+// are tuned to the same ATIS.
+// You can see it by pointing a web browser
+// at the property tree. The second comm radio is:
+// http://localhost:5400/instrumentation/comm[1]
+//
+// (Also, if in debug mode, dump it to the console.)
+void FGATIS::TreeOut(int msg_OK){
+ for (map<string,int>::iterator act = active_on.begin();
+ act != active_on.end();
+ act++){
+ string prop = "/instrumentation/" + act->first + "/atis";
+ globals->get_props()->setStringValue(prop.c_str(),
+ ("<pre>\n" + transmission_readable + "</pre>\n").c_str());
+#ifdef ATIS_TEST
+ if (msg_OK) cout << "**** ATIS active on: " << prop << endl;
+#endif
+ }
+#ifdef ATIS_TEST
+ if (msg_OK) cout << transmission_readable << endl;
+#endif
+}