From: curt Date: Wed, 13 Sep 2000 20:57:46 +0000 (+0000) Subject: Initial revision. X-Git-Url: https://git.mxchange.org/?a=commitdiff_plain;h=948f6b05d5d10c84a68849f0eaf44092b8168c3e;p=flightgear.git Initial revision. --- diff --git a/docs-mini/README.MSVC b/docs-mini/README.MSVC new file mode 100644 index 000000000..1be4403e8 --- /dev/null +++ b/docs-mini/README.MSVC @@ -0,0 +1,221 @@ +HowTo compile FlightGear with Microsoft Visual C++ 6.0 +====================================================== + +This HowTo is written for FlightGear 0.7.4. You might be able to +figure out how to get any other version running by reading it as the +steps are quite simmilar. + +First you need FlightGear 0.7.4 or on of the current snapshots from + + ftp://ftp.flightgear.org/pub/fgfs/Source + +or + + ftp://ftp.flightgear.org/pub/fgfs/Source/snapshots + +The you need the libraries that it depends on. This is SimGear 0.0.9 +and plib 1.1.11. Those libraries can be found at + + ftp://ftp.flightgear.org/pub/fgfs/Source + +and + + http://plib.sourceforge.net/ + +Then you've got two posibilities. Either use the MSVC workspace that +you can find at + + ftp://ftp.flightgear.org/pub/fgfs/Source + +or create your own workspace. + +The premade workspace will give you a quicker start (it takes some +time to create your own), but it will most probably be outdatet so +that you'd have to fix it. + +Any wich way you choose you'll have to create the plib library now +(i.e. before you touch anything from FGFS). You can either use the +workspace that comes with it (most probably outdated) or create your +own ones. The way to do that is very similar to those of the creation +of the SimGear workspaces which is described below. + +If you use the premade workspace (one for SimGear and one for +FlightGear) you'll have to open the SimGear one first and compile it, +then the FlightGear one. After that you should be read to run FGFS. + +The universal approach is by creating your own workspace. + +Make sure that you've compiled PLIB sucessfully and that you've got in +...\plib (I'm using ...\ for the directory where all your projects +are. The name of the directory doesn't matter as all paths will be +relative): + + ...\plib\plib.lib + ...\plib\fnt.h + ...\plib\plib\js.h + ...\plib\pu.h + ...\plib\sg.h + ...\plib\sl.h + ...\plib\sm.h + ...\plib\ssg.h + ...\plib\ssgKeyFlier.h + +(This also important when you are using the premade workspaces) + +Now unzip SimGear-0.0.9 into ...\SimGear (NOTE: There's no -0.0.9 at +the end of the directory) and run MSVC. Create a new and empty +workspace, call it 'SimGear Workspace' and make sure it'S path is +'...\SimGear\SimGear Workspace' + +Then you'll have to add lots of new projects. The best way is by right +clicking on the workspace and select 'Add new project'. Select +Win32-Library (static) in the dialog and set the name to the first +subdir in ...\SimGear\simgear. That'll be most probably 'bucket'. The +path will automatically be set to ...\SimGear\bucket. Then press OK as +often as necessary (we don't need any of the checkboxes that'll +apear). + +Repeat that with all subdirectories. (If you'll open both, MSVC and +the Explorer it'll be quite fast). With SimGear 0.0.9 you should have +11 projects. + +Now do it the last time and create a project with the name 'simgear' +and make it dependant on all other projects (through the projects +menu). + +Now it's time to fill the projects. Right click on the first one and +select the item to add new files. In the file selector select the +files of the corresponding directory. That'll be e.g. for the 'bucket' +project: + + ...\SimGear\simgear\bucket\newbucket.cxx + ...\SimGear\simgear\bucket\newbucket.hxx + +The files for the MetaKit live in + + ...\SimGear\simgear\metakit\src\ + +and + + ...\SimGear\simgear\metakit\include\ + +NOTE: borc.h, gnuc.h, mk4dll.h and mwcw.h aren't needed and shouldn't +be included + +Then add to all projects the additional search path +'..\..\,..\..\..\,..\..\simgear\'. Do that by pressing Alt-F7, +selecting all projects, selecting 'all configurations', selecting the +'C/C++' tab, selecting 'preprocessor' and then add that path to the +additional include path. + +The 'metakit' project needs a special addition to its include path: +'..\..\\simgear\metakit\win,..\..\simgear\metakit\include' + +All projects need the additon of a few preprocessor defines. You can +set those in the Alt-F7 dialog on the same tab where you set the +include paths. The necessary defines are: + + HAVE_WINDOWS_H and HAVE_RAND + +Now we are nearly ready for compiling SimGear. The only thing missing +is the exclusion of all those test programms. These programms are + + debug: logtest.cxx + magvar: testmagvar.cxx + metar: Drvmetar.c + serial: testserial.cxx + zlib: example.c + zlib: maketree.obj + zlib: minigzip.c + +To exclude them, press Alt-F7, select 'all configurations' and then +select all those files, and then exlclude those files. + +Last thing to do before you can compile SimGear is to press Alt-F7 +once again, select simgear and all configurations and the general +tab. Add '..\..\' to the directory for the output files. + +Finally you can hit compile. + +When you've done everything correctly you'll have a 'simgear.lib' at +...\SimGear\. + +Congratulations for completing step 1. + +To compile FlightGear you'll have to do quite similar steps. + +Make sure that FlighGear lives in ...\FlightGear, create a new and +empty workspace named 'FlightGear Workspace' at +'...\FlightGear\FlightGear Workspace'. Now add the projects that are +named after the directories in ...\FlightGear\src. + +NOTE: Create a project named 'FDM' as well as projects named + 'FDM Balloon', 'FDM JSBsim', ... +NOTE: There'll even be a project named 'FDM JSBsim Filtersjb' +NOTE: The directory 'Include' doesn't get its own project +NOTE: The directory 'Main' is special. It's project name is + 'FlightGear' and it's not a win32 libraray. It's a + win32-console application. + +Then it's time to add the files in those directories to the +projects. (See description of SimGear for the details). + +Next step is to set the dependancies. 'FDM JSBsim' depends on 'FDM +JSBsim Filtersjb', 'FDM' depends on the other 'FDM ...' projects and +'FlightGear' depends on all other projects (but not 'FDM Ballon' +etc. as other projects do already depend on them). + +NOTE: No project is allowed to depend on 'NetworkOLK' as it isn'T +compatible with MSVC yet. + +Now make sure that the 'FlightGear' project is the active one (that's +the bold one). + +Then add those include paths: ..\..\..\SimGear\,..\..\src,..\..\src\Include,..\..\..\,..\..\..\SimGear\simgear\metakit\include\ + +Exclude the following files: + +airports: buildsimple.cxx +Navaids: testnavs.cxx +Joystick: js_demo.cxx +FDM JSBsim: JSBSim.cpp + +Wolfram Kuss (w_kuss@rz-online.de) figured out that the following +files also have to be excluded: + +LaRCsim/c172_main.c +airports/testair +airports/genrunwas +airports/gensimple +the rest of airports ?? +scenery/test +time/win32test +time/test_event + +Add those preprocessor defines + +HAVE_WINDOWS_H, FGFS, ENABLE_PLIB_JOYSTICK + +Add those libraries to the linker + +plib.lib simgear.lib ws2_32.lib + +and those paths to the library paths + +..\..\..\plib,..\..\..\simgear + +Now press Alt-F7 again, select 'FlightGear' and 'all +configurations'. Now specify your FG_ROOT/bin directory as the +directory for the output data and FG_ROOT as the working directory. + +Now you are ready to compile FGFS! Have fun. + +NOTE: Wolfram Kuss (w_kuss@rz-online.de) Figured out that a lot of +files are useing header files from SimGear. This leads to problems +with using precompiled headers as long as you didn't declare all +dependencies. He simply turned off precompiled headers. + +NOTE: As most developers aren't using MSVC the source code is probably +broken. If that's the case and you know how to fix it it'll be nice if +you could mail a bug report with it's fix to the FlightGear +development list.