use Org\Mxchange\CoreFramework\EntryPoint\ApplicationEntryPoint;
use Org\Mxchange\CoreFramework\Factory\Object\ObjectFactory;
use Org\Mxchange\CoreFramework\Filesystem\File\BaseAbstractFile;
+use Org\Mxchange\CoreFramework\Filesystem\FilePointer;
use Org\Mxchange\CoreFramework\Index\Indexable;
use Org\Mxchange\CoreFramework\Stack\File\StackableFile;
use Org\Mxchange\CoreFramework\Traits\Index\IndexableTrait;
protected function __construct (string $className) {
// Call parent constructor
parent::__construct($className);
-
- // Init counters and gaps array
- $this->initCountersGapsArray();
}
/**
$this->seekPosition = $seekPosition;
}
- /**
- * Marks whole file as gaps-only (freshly created file
- *
- * @param $type Type of file
- * @param $minimumBlockLength Minimum block length
- * @return void
- */
- private function markFileGapsOnly (string $type, int $minimumBlockLength) {
- // Very simple to do ...
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: type=%s,minimumBlockLength=%d - CALLED!', $type, $minimumBlockLength));
- for ($idx = 0; $idx < FrameworkBootstrap::getConfigurationInstance()->getConfigEntry($type . '_pre_allocate_count'); $idx++) {
- // Mark start and end position as gap
- $this->addGap($idx * $minimumBlockLength, $idx * $minimumBlockLength + $minimumBlockLength);
- }
-
- // Trace message
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
- }
-
/**
* Checks whether the abstracted file only contains gaps by counting all
* gaps' bytes together and compare it to total length.
*
* @return $isGapsOnly Whether the abstracted file only contains gaps
+ * @throws OutOfBoundsException If calculated file size is larger than actual
*/
- private function isFileGapsOnly () {
+ public function isFileGapsOnly () {
// Count every gap
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
$gapsSize = 0;
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->gaps()=%d', count($this->gaps)));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->gaps()=%d', count($this->gaps)));
foreach ($this->gaps as $gap) {
// Calculate size of found gap: end-start including both
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: gap[%s]=%d,ga[%s]=%d', self::GAPS_INDEX_START, $gap[self::GAPS_INDEX_START], self::GAPS_INDEX_END, $gap[self::GAPS_INDEX_END]));
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: gapsSize=%d', $gapsSize));
}
- // Total gap size + header size must be same as file size
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: gapsSize=%d,this->fileSize=%d', $gapsSize, $this->getFileSize()));
- $isGapsOnly = ($gapsSize + 1 == $this->getFileSize());
+ // Total gap size + header size + 1 must be same as file size
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: gapsSize=%d,this->headerSize=%d,this->fileSize=%d', $gapsSize, $this->getHeaderSize(), $this->getFileSize()));
+ $determinedFileSize = ($gapsSize + $this->getHeaderSize() + 1);
- // Return status
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: isGapsOnly=%d - EXIT!', intval($isGapsOnly)));
+ // Should not be more!
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: determinedFileSize=%d,this->fileSize=%d', $determinedFileSize, $this->getFileSize()));
+ if ($determinedFileSize > $this->getFileSize()) {
+ // Should not happen
+ throw new OutOfBoundsException(sprintf('determinedFileSize=%d is larger than this->fileSize=%d', $determinedFileSize, $this->getFileSize()));
+ }
+
+ // Is it same?
+ $isGapsOnly = ($determinedFileSize == $this->getFileSize());
+
+ // Return flag
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: isGapsOnly=%d - EXIT!', intval($isGapsOnly)));
return $isGapsOnly;
}
+ /**
+ * Marks whole file as gaps-only (freshly created file
+ *
+ * @param $type Type of file
+ * @param $minimumBlockLength Minimum block length
+ * @return void
+ */
+ private function markFileGapsOnly (string $type, int $minimumBlockLength) {
+ // Very simple to do ...
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: type=%s,minimumBlockLength=%d - CALLED!', $type, $minimumBlockLength));
+ for ($idx = 0; $idx < FrameworkBootstrap::getConfigurationInstance()->getConfigEntry($type . '_pre_allocate_count'); $idx++) {
+ // Calculate start/end positions
+ $startPosition = $idx * $minimumBlockLength;
+ $endPosition = $idx * $minimumBlockLength + $minimumBlockLength;
+
+ // Mark start and end position as gap
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->addGap(%d, %d) ...', $startPosition, $endPosition));
+ $this->addGap($startPosition, $endPosition);
+ }
+
+ // Trace message
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
+ }
+
/**
* Adds a gap for given start and end position
*
$currentPosition = $this->determineSeekPosition();
// Now add it as gap entry
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: currentPosition=%d', $currentPosition));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->addGap(%d, %d) ..', ($currentPosition - $length), $currentPosition));
$this->addGap(($currentPosition - $length), $currentPosition);
// Trace message
*/
public function initCountersGapsArray () {
// Init counter and seek position to header size
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->determineSeekPosition() - CALLED!');
+ $seekPosition = $this->getSeekPosition();
+
+ // Set counter
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%d', $seekPosition));
$this->setCounter(0);
- $this->setSeekPosition($this->getHeaderSize());
+
+ // Get header size
+ $headerSize = $this->getHeaderSize();
+
+ // Set it
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Setting this->seekPosition=%d ...', $headerSize));
+ $this->setSeekPosition($headerSize);
// Init arrays
$this->gaps = [];
$this->damagedEntries = [];
+ // Seek back to old position
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->seek(%d) ...', $seekPosition));
+ $this->seek($seekPosition);
+
// Trace message
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
}
*/
public function writeData (int $seekPosition, string $data, bool $flushHeader = true) {
// Validate parameter
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%s,data()=%d,flushHeader=%d - CALLED!', $seekPosition, strlen($data), intval($flushHeader)));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%s,data()=%d,flushHeader=%d - CALLED!', $seekPosition, strlen($data), intval($flushHeader)));
if ($seekPosition < 0) {
// Invalid seek position
throw new OutOfBoundsException(sprintf('seekPosition=%d is not valid', $seekPosition));
}
// Write data at given position
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->writeAtPosition(%d,%s) ...', $seekPosition, $data));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->writeAtPosition(%d,%s) ...', $seekPosition, $data));
$this->writeAtPosition($seekPosition, $data);
// Increment counter
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->incrementCounter() ...');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->incrementCounter() ...');
$this->incrementCounter();
// Update seek position
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->updateSeekPosition() ...');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->updateSeekPosition() ...');
$this->updateSeekPosition();
// Flush the header?
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: flushHeader=%d', intval($flushHeader)));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: flushHeader=%d', intval($flushHeader)));
if ($flushHeader === true) {
// Flush header
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->flushFileHeader() ...');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->flushFileHeader() ...');
$this->flushFileHeader();
// Seek to old position
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->seekToOldPosition() ...');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->seekToOldPosition() ...');
$this->seekToOldPosition();
}
// Trace message
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
}
/**
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
}
- /**
- * Pre-allocates file (if enabled) with some space for later faster write access.
- *
- * @param $type Type of the file
- * @return void
- * @throws InvalidArgumentException If a parameter is empty
- */
- public function preAllocateFile (string $type) {
- // Is it enabled?
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: type=%s - CALLED!', $type));
- if (empty($type)) {
- // Empty type
- throw new InvalidArgumentException('Parameter "type" is empty');
- } elseif (FrameworkBootstrap::getConfigurationInstance()->getConfigEntry($type . '_pre_allocate_enabled') != 'Y') {
- // Don't continue here.
- self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Not pre-allocating file.'));
- return;
- }
-
- // Message to user
- self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Pre-allocating file ...');
-
- // Calculate minimum length for one entry and get file size
- $minimumBlockLength = $this->getIndexInstance()->calculateMinimumBlockLength();
- $fileSize = $this->getFileSize();
-
- // Calulcate seek position
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: minimumBlockLength=%d,fileSize=%d', $minimumBlockLength, $fileSize));
- $seekPosition = $minimumBlockLength * FrameworkBootstrap::getConfigurationInstance()->getConfigEntry($type . '_pre_allocate_count') + $fileSize ;
-
- // Now simply write a NUL there. This will pre-allocate the file.
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->writeAtPosition(%d,NUL) ...', $seekPosition));
- $this->writeAtPosition($seekPosition, chr(0));
-
- // Is the seek position zero?
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: fileSize=%d', $fileSize));
- if ($fileSize == 0) {
- // Mark file as gaps-only
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->markGapsOnly(%s,%d) ...', $type, $minimumBlockLength));
- $this->markFileGapsOnly($type, $minimumBlockLength);
- } else {
- // Analyze file structure
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->analyzeFileStructure() ...');
- $this->analyzeFileStructure();
- }
-
- // Rewind seek position
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->rewind() ...');
- $this->rewind();
-
- // Trace message
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
- }
-
/**
* Determines seek position
*
}
// Call pointer instance
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->pointerInstance->read(%d) ...', $bytes));
$data = $this->getPointerInstance()->read($bytes);
+ // Update seek position
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->updateSeekPosition() ...');
+ $this->updateSeekPosition();
+
// Return data
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: data[%s]=%s - EXIT!', gettype($data), $data));
return $data;
*/
public function analyzeFileStructure () {
// Make sure the file is initialized
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
if (!$this->isFileInitialized()) {
// Bad method call
throw new BadMethodCallException('Method called but file is not initialized.');
}
// Init counters and gaps array
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->initCounterGapsArrays() ...');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->initCounterGapsArrays() ...');
$this->initCountersGapsArray();
// Output message (as this may take some time)
self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('Analyzing file structure ... (this may take some time)'));
// First rewind to the begining
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->rewind() ...');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->rewind() ...');
$this->rewind();
// Then try to load all entries
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Looping through file');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Looping through file');
while ($this->isValid()) {
// Get current entry
$current = $this->getCurrentBlock();
* that the file has been pre-allocated.
*/
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: current(%d)[]=%s', strlen($current), gettype($current)));
- if (empty($current)) {
+ if (empty(trim($current, chr(0)))) {
// Then skip this part
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: current[]=%s is empty - CONTINUE!', gettype($current)));
continue;
}
// Handle current record
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: current(%d)[]=%s', strlen($current), gettype($current)));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: current(%d)[%s]=%s', strlen($current), gettype($current), $current));
}
// If the last read block is empty, check gaps
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: current()=%d', strlen($current)));
- if (empty($current)) {
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: current()=%d', strlen($current)));
+ if (empty(trim($current, chr(0)))) {
// Output message
self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Found a total of %d gaps.', count($this->gaps)));
// Check gaps, if the whole file is empty.
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->isFileGapsOnly() ...');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->isFileGapsOnly() ...');
if ($this->isFileGapsOnly()) {
// Only gaps, so don't continue here.
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: File is gaps-only - EXIT!');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: File is gaps-only - EXIT!');
return;
}
+ }
- /*
- * The above call has calculated a total size of all gaps. If the
- * percentage of gaps passes a "soft" limit and last
- * defragmentation is to far in the past, or if a "hard" limit has
- * reached, run defragmentation.
- */
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->isDefragmentationNeeded() ...');
- if ($this->isDefragmentationNeeded()) {
- // Run "defragmentation"
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->doRunDefragmentation() ...');
- $this->doRunDefragmentation();
- }
+ /*
+ * The above call has calculated a total size of all gaps. If the
+ * percentage of gaps passes a "soft" limit and last
+ * defragmentation is to far in the past, or if a "hard" limit has
+ * reached, run defragmentation.
+ */
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->isDefragmentationNeeded() ...');
+ if ($this->isDefragmentationNeeded()) {
+ // Run "defragmentation"
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->doRunDefragmentation() ...');
+ $this->doRunDefragmentation();
}
// Trace message
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
}
/**
- * Reads next "block" of bytes into $currentBlock field
+ * Reads next "block" of bytes into $currentBlock field. THis method loads
+ * the whole file into memory when the file is just freshly initialized
+ * (only zeros in it).
*
* @return void
- * @throws BadMethodCallException If this method was called without prior valid() call
*/
- public function readNextBlock () {
- // Is there nothing to read?
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
- if (!$this->isValid()) {
- // Nothing to read
- throw new BadMethodCallException('next() invoked but no valid current block (EOF?)');
- }
-
+ private function readNextBlock () {
// First calculate minimum block length
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d', $this->determineSeekPosition()));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d - CALLED!', $this->getSeekPosition()));
$length = $this->getIndexInstance()->calculateMinimumBlockLength();
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: length=%d', $length));
// Read possibly back-buffered bytes from previous call of next().
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d,length=%d', $this->getSeekPosition(), $length));
$data = $this->getBackBuffer();
/*
* "block" may not fit, so this loop will continue until the EOB or EOF
* has been reached whatever comes first.
*/
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: data()=%d', strlen($data)));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d,data()=%d', $this->getSeekPosition(), strlen($data)));
while ((!$this->isEndOfFileReached()) && (empty($data) || !self::isBlockSeparatorFound($data))) {
// Then read the next possible block
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->read(%d) ...', $length));
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d, calling this->read(%d) ...', $this->getSeekPosition(), $length));
$block = $this->read($length);
- // Is it all empty?
+ // Is the block empty?
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: block()=%d,length=%d', strlen($block), $length));
- if (strlen(trim($block, chr(0))) == 0) {
- // Mark this block as empty
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->markCurrentBlockAsEmpty(%d) ...', strlen($block)));
- $this->markCurrentBlockAsEmpty(strlen($block));
-
- // Exit look
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Empty block found ... - BREAK!');
- break;
+ if (empty(trim($block, chr(0)))) {
+ // Mark it as empty
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d, calling this->markCurrentBlockAsEmpty(%d) ...', $this->getSeekPosition(), $length));
+ $this->markCurrentBlockAsEmpty($length);
}
// At this block then
$data .= $block;
- // A debug message
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: data(%d)=%s', strlen($data), $data));
+ // Debug message
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d,data()=%d', $this->getSeekPosition(), strlen($data)));
}
/*
* Init back-buffer which is the data that has been found beyond the
* separator.
*/
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->initBackBuffer(), clearing this->currentBlock ...');
$this->initBackBuffer();
+ $this->setCurrentBlock('');
// Is $data empty?
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: data(%d)=%s', strlen($data), $data));
- if (empty($data)) {
+ if (empty(trim($data, chr(0)))) {
// Yes, maybe whole file was ...
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Maybe empty file found - EXIT!');
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: this->seekPosition=%d, maybe empty file found - EXIT!', $this->getSeekPosition()));
return;
}
$this->setCurrentBlock($dataArray[0]);
// Is back buffere data found?
- if (isset($dataArray[1])) {
+ if (!empty(trim($dataArray[1], chr(0)))) {
// Set back buffer
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Setting this->backBuffer=%s ...', $dataArray[1]));
$this->setBackBuffer($dataArray[1]);
}
//* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
}
+ /**
+ * Pre-allocates file (if enabled) with some space for later faster write access.
+ *
+ * @param $type Type of the file
+ * @return void
+ * @throws InvalidArgumentException If a parameter is empty
+ * @throws BadMethodCallException If this->stackInstance is not properly set
+ */
+ protected function preAllocateFileByTypeLength (string $type, int $minimumBlockLength) {
+ // Is it enabled?
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: type=%s,minimumBlockLength=%d - CALLED!', $type, $minimumBlockLength));
+ if (empty($type)) {
+ // Empty type
+ throw new InvalidArgumentException('Parameter "type" is empty');
+ } elseif ($minimumBlockLength < 1) {
+ // Invalid block length
+ throw new InvalidArgumentException(sprintf('Parameter minimumBlockLength=%d is not valid', $minimumBlockLength));
+ } elseif (FrameworkBootstrap::getConfigurationInstance()->getConfigEntry($type . '_pre_allocate_enabled') != 'Y') {
+ // Don't continue here.
+ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Not pre-allocating file.'));
+ return;
+ }
+
+ // Get file size
+ $fileSize = $this->getFileSize();
+
+ // Calulcate seek position
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: minimumBlockLength=%d,fileSize=%d', $minimumBlockLength, $fileSize));
+ $seekPosition = $this->getHeaderSize() + $minimumBlockLength * FrameworkBootstrap::getConfigurationInstance()->getConfigEntry($type . '_pre_allocate_count') + $fileSize ;
+
+ // Now simply write a NUL there. This will pre-allocate the file.
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->writeAtPosition(%d,NUL) ...', $seekPosition));
+ $this->writeAtPosition($seekPosition, chr(0));
+
+ // Is the seek position zero?
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: fileSize=%d', $fileSize));
+ if ($fileSize == 0) {
+ // Mark file as gaps-only
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: Calling this->markGapsOnly(%s,%d) ...', $type, $minimumBlockLength));
+ $this->markFileGapsOnly($type, $minimumBlockLength);
+ } else {
+ // Analyze file structure
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->analyzeFileStructure() ...');
+ $this->analyzeFileStructure();
+ }
+
+ // Rewind seek position
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: Calling this->rewind() ...');
+ $this->rewind();
+
+ // Trace message
+ //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
+ }
+
/**
* Checks wether the current entry is valid (not at the end of the file).
* This method will return true if an emptied (nulled) entry has been found.
*
* @return $isValid Whether the next entry is valid
- * @throws UnexpectedValueException If some value is not expected
+ * @throws InvalidArgumentException If a parameter is not valid
*/
- public function isValid () {
- // First calculate minimum block length
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
- $length = $this->getIndexInstance()->calculateMinimumBlockLength();
-
- // Short be more than zero!
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: length=%d', $length));
+ protected function isValidByLength (int $length) {
+ // Validate parameter
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: length=%d - CALLED!', $length));
if ($length < 1) {
- // Throw UVE
- throw new UnexpectedValueException(sprintf('length=%d is not expected', $length));
+ // Throw IAE
+ throw new InvalidArgumentException(sprintf('Parameter length=%d is not valid', $length));
}
// Get current seek position
$seekPosition = $this->determineSeekPosition();
// Then try to read it
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%d', $seekPosition));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%d', $seekPosition));
$data = $this->read($length);
// If some bytes could be read, all is fine
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: data[%s]()=%d', gettype($data), strlen($data)));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: data[%s]()=%d', gettype($data), strlen($data)));
$isValid = ((is_string($data)) && (strlen($data) > 0));
// Get header size
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: isValid=%d', intval($isValid)));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: isValid=%d', intval($isValid)));
$headerSize = $this->getHeaderSize();
// Is the seek position at or beyond the header?
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%d,headerSize=%d', $seekPosition, $headerSize));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: seekPosition=%d,headerSize=%d', $seekPosition, $headerSize));
if ($seekPosition >= $headerSize) {
// Seek back to old position
$isValid = ($isValid && $this->seek($seekPosition) === 0);
}
// Return result
- //* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: isValid=%d - EXIT!', intval($isValid)));
+ /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput(sprintf('BASE-BINARY-FILE: isValid=%d - EXIT!', intval($isValid)));
return $isValid;
}
/* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
}
- /**
- * Flushes the file header
- *
- * @return void
- */
- public function flushFileHeader () {
- // Call block instance
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: CALLED!');
- $this->getIndexInstance()->flushFileHeader();
-
- // Trace message
- /* NOISY-DEBUG: */ self::createDebugInstance(__CLASS__, __LINE__)->debugOutput('BASE-BINARY-FILE: EXIT!');
- }
-
/**
* Searches for next suitable gap the given length of data can fit in
* including padding bytes.
projects / core.git / blobdiff