\n\n"; OUTPUT_HTML($OUT); } // Close a table (you may want to add some footer stuff here) function CLOSE_TABLE($ADD="") { OUTPUT_HTML(" \n"); if (!empty($ADD)) OUTPUT_HTML($ADD); OUTPUT_HTML(""); } // Output HTML code directly or "render" it. You addionally switch the new-line character off function OUTPUT_HTML($HTML, $NEW_LINE = true) { // Some global variables global $OUTPUT, $footer, $CSS; // Do we have HTML-Code here? if (!empty($HTML)) { // Yes, so we handle it as you have configured switch (OUTPUT_MODE) { case "render": // That's why you don't need any \n at the end of your HTML code... :-) if (_OB_CACHING == "on") { // Output into PHP's internal buffer OUTPUT_RAW($HTML); // That's why you don't need any \n at the end of your HTML code... :-) if ($NEW_LINE) echo "\n"; } else { // Render mode for old or lame servers... $OUTPUT .= $HTML; // That's why you don't need any \n at the end of your HTML code... :-) if ($NEW_LINE) $OUTPUT .= "\n"; } break; case "direct": // If we are switching from render to direct output rendered code if ((!empty($OUTPUT)) && (_OB_CACHING != "on")) { OUTPUT_RAW($OUTPUT); $OUTPUT = ""; } // The same as above... ^ OUTPUT_RAW($HTML); if ($NEW_LINE) echo "\n"; break; default: // Huh, something goes wrong or maybe you have edited config.php ??? die ("".FATAL_ERROR.": ".LANG_NO_RENDER_DIRECT); break; } } elseif ((_OB_CACHING == "on") && ($footer == 1)) { // Output cached HTML code $OUTPUT = ob_get_contents(); // Clear output buffer for later output ob_end_clean(); // Extension "rewrite" installed? if ((EXT_IS_ACTIVE("rewrite")) && (function_exists('REWRITE_LINKS')) && ($CSS != "1") && ($CSS != "-1")) { $OUTPUT = REWRITE_LINKS($OUTPUT); } // END - if // Compile and run finished rendered HTML code while (strpos($OUTPUT, '{!') > 0) { // Prepare the content and eval() it... $newContent = ""; $eval = "\$newContent = \"".COMPILE_CODE(addslashes($OUTPUT))."\";"; @eval($eval); // Was that eval okay? if (empty($newContent)) { // Something went wrong! die("Evaluation error:
".htmlentities($eval)."
"); } // END - if $OUTPUT = $newContent; } // END - while // Output code here, DO NOT REMOVE! ;-) OUTPUT_RAW($OUTPUT); } elseif ((OUTPUT_MODE == "render") && (!empty($OUTPUT))) { // Rewrite links when rewrite extension is active if ((EXT_IS_ACTIVE("rewrite")) && (function_exists('REWRITE_LINKS')) && ($CSS != "1") && ($CSS != "-1")) { $OUTPUT = REWRITE_LINKS($OUTPUT); } // END - if // Compile and run finished rendered HTML code while (strpos($OUTPUT, '{!') > 0) { $eval = "\$OUTPUT = \"".COMPILE_CODE(addslashes($OUTPUT))."\";"; eval($eval); } // END - while // Output code here, DO NOT REMOVE! ;-) OUTPUT_RAW($OUTPUT); } } // Output the raw HTML code function OUTPUT_RAW ($HTML) { // Output stripped HTML code to avoid broken JavaScript code, etc. echo stripslashes(stripslashes($HTML)); // Flush the output if only _OB_CACHING is not "on" if (_OB_CACHING != "on") { // Flush it flush(); } // END - if } // Add a fatal error message to the queue array function ADD_FATAL ($message, $extra="") { global $FATAL; if (empty($extra)) { // Regular text message to add to $FATAL $FATAL[] = $message; } else { // $message is text with a mask plus extras to insert into the text $FATAL[] = sprintf($message, $extra); } } // Load a template file and return it's content (only it's name; do not use ' or ") function LOAD_TEMPLATE($template, $return=false, $content=array()) { // Add more variables which you want to use in your template files global $DATA, $_CONFIG, $username; // Make all template names lowercase $template = strtolower($template); // Count the template load if (!isset($_CONFIG['num_templates'])) $_CONFIG['num_templates'] = 0; $_CONFIG['num_templates']++; // Init some data $ret = ""; if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = 0; // @DEPRECATED Try to remove this if() block if ($template == "member_support_form") { // Support request of a member $result = SQL_QUERY_ESC("SELECT gender, surname, family, email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1", array($GLOBALS['userid']), __FILE__, __LINE__); // @TODO Merge this data into $content list($gender, $surname, $family, $email) = SQL_FETCHROW($result); // Translate gender $gender = TRANSLATE_GENDER($gender); // Insert data if content is an array if (is_array($content)) { // Please switch to $content[bla] in all your templates! Direct // variables are deprecated as of 09/13/2008. $content['gender'] = $gender; $content['surname'] = $surname; $content['family'] = $family; $content['email'] = $email; } // END - if // Free result SQL_FREERESULT($result); } // END - if // Generate date/time string $date_time = MAKE_DATETIME(time(), "1"); // Base directory $BASE = sprintf("%stemplates/%s/html/", PATH, GET_LANGUAGE()); $MODE = ""; // Check for admin/guest/member templates if (strpos($template, "admin_") > -1) { // Admin template found $MODE = "admin/"; } elseif (strpos($template, "guest_") > -1) { // Guest template found $MODE = "guest/"; } elseif (strpos($template, "member_") > -1) { // Member template found $MODE = "member/"; } elseif (strpos($template, "install_") > -1) { // Installation template found $MODE = "install/"; } elseif (strpos($template, "ext_") > -1) { // Extension template found $MODE = "ext/"; } elseif (strpos($template, "la_") > -1) { // "Logical-area" template found $MODE = "la/"; } else { // Test for extension $test = substr($template, 0, strpos($template, "_")); if (EXT_IS_ACTIVE($test)) { // Set extra path to extension's name $MODE = $test."/"; } } //////////////////////// // Generate file name // //////////////////////// $file = $BASE.$MODE.$template.".tpl"; if ((!empty($GLOBALS['what'])) && ((strpos($template, "_header") > 0) || (strpos($template, "_footer") > 0)) && (($MODE == "guest/") || ($MODE == "member/") || ($MODE == "admin/"))) { // Select what depended header/footer template file for admin/guest/member area $file2 = sprintf("%s%s%s_%s.tpl", $BASE, $MODE, $template, SQL_ESCAPE($GLOBALS['what']) ); // Probe for it... if (FILE_READABLE($file2)) $file = $file2; // Remove variable from memory unset($file2); } // Does the special template exists? if (!FILE_READABLE($file)) { // Reset to default template $file = $BASE.$template.".tpl"; } // END - if // Now does the final template exists? if (FILE_READABLE($file)) { // The local file does exists so we load it. :) $tmpl_file = implode("", file($file)); // Replace ' to our own chars to preventing them being quoted while (strpos($tmpl_file, "\'") !== false) { $tmpl_file = str_replace("\'", '{QUOT}', $tmpl_file); } // Do we have to compile the code? $ret = ""; if ((strpos($tmpl_file, "\$") !== false) || (strpos($tmpl_file, '{--') !== false) || (strpos($tmpl_file, '--}') > 0)) { // Okay, compile it! $tmpl_file = "\$ret=\"".COMPILE_CODE(addslashes($tmpl_file))."\";"; eval($tmpl_file); } else { // Simply return loaded code $ret = $tmpl_file; } // Add surrounding HTML comments to help finding bugs faster $ret = "\n".$ret."\n"; } elseif ((IS_ADMIN()) || ((isBooleanConstantAndTrue('mxchange_installing')) && (!isBooleanConstantAndTrue('mxchange_installed')))) { // Only admins shall see this warning or when installation mode is active $ret = "
".TEMPLATE_404."
(".basename($file).")

".TEMPLATE_CONTENT."
".print_r($content, true)."
".TEMPLATE_DATA."
".print_r($DATA, true)."


"; } // Do we have some content to output or return? if (!empty($ret)) { // Not empty so let's put it out! ;) if ($return) { // Return the HTML code return $ret; } else { // Output direct OUTPUT_HTML($ret); } } elseif (isBooleanConstantAndTrue('DEBUG_MODE')) { // Warning, empty output! return "E:".$template."
\n"; } } // Send mail out to an email address function SEND_EMAIL($TO, $SUBJECT, $MSG, $HTML = "N", $FROM = "") { //* DEBUG: */ print __FUNCTION__."(".__LINE__."):TO={$TO},SUBJECT={$SUBJECT}
\n"; // Compile subject line (for POINTS constant etc.) $eval = "\$SUBJECT = html_entity_decode(\"".COMPILE_CODE(addslashes($SUBJECT))."\");"; eval($eval); // Set from header if ((!eregi("@", $TO)) && ($TO > 0)) { // Value detected, is the message extension installed? if (EXT_IS_ACTIVE("msg")) { ADD_MESSAGE_TO_BOX($TO, $SUBJECT, $MSG, $HTML); return; } else { // Load email address $result_email = SQL_QUERY_ESC("SELECT email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1", array(bigintval($TO)), __FILE__, __LINE__); //* DEBUG: */ print __FUNCTION__."(".__LINE__."):numRows=".SQL_NUMROWS($result_email)."
\n"; // Does the user exist? if (SQL_NUMROWS($result_email)) { // Load email address list($TO) = SQL_FETCHROW($result_email); } else { // Set webmaster $TO = WEBMASTER; } // Free result SQL_FREERESULT($result_email); } } elseif ("$TO" == "0") { // Is the webmaster! $TO = WEBMASTER; } //* DEBUG: */ print __FUNCTION__."(".__LINE__."):TO={$TO}
\n"; // Check for PHPMailer or debug-mode if (!CHECK_PHPMAILER_USAGE()) { // Not in PHPMailer-Mode if (empty($FROM)) { // Load email header template $FROM = LOAD_EMAIL_TEMPLATE("header"); } else { // Append header $FROM .= LOAD_EMAIL_TEMPLATE("header"); } } elseif (isBooleanConstantAndTrue('DEBUG_MODE')) { if (empty($FROM)) { // Load email header template $FROM = LOAD_EMAIL_TEMPLATE("header"); } else { // Append header $FROM .= LOAD_EMAIL_TEMPLATE("header"); } } // Compile "TO" $eval = "\$TO = \"".COMPILE_CODE(addslashes($TO))."\";"; eval($eval); // Fix HTML parameter (default is no!) if (empty($HTML)) $HTML = "N"; if (isBooleanConstantAndTrue('DEBUG_MODE')) { // In debug mode we want to display the mail instead of sending it away so we can debug this part echo "
".htmlentities(trim($FROM))."
To      : ".$TO."
Subject : ".$SUBJECT."
Message : ".$MSG."
\n"; // Log the mail away if (defined('DEBUG_MAIL')) DEBUG_LOG(__FUNCTION__.":to={$TO},subject={$SUBJECT},msg={$MSG}"); } elseif (($HTML == "Y") && (EXT_IS_ACTIVE("html_mail"))) { // Send mail as HTML away SEND_HTML_EMAIL($TO, $SUBJECT, $MSG, $FROM); } elseif (!empty($TO)) { // Send Mail away SEND_RAW_EMAIL($TO, COMPILE_CODE($SUBJECT), COMPILE_CODE($MSG), $FROM); } elseif ($HTML == "N") { // Problem found! SEND_RAW_EMAIL(WEBMASTER, COMPILE_CODE($SUBJECT), COMPILE_CODE($MSG), $FROM); } } // Check if legacy or PHPMailer command // @private function CHECK_PHPMAILER_USAGE() { return ((defined('SMTP_HOSTNAME')) && (defined('SMTP_USER')) && (defined('SMTP_PASSWORD')) && (SMTP_HOSTNAME != "") && (SMTP_USER != "")); } /* * Send out a raw email with PHPMailer class or legacy mail() command */ function SEND_RAW_EMAIL ($to, $subject, $msg, $from) { // Shall we use PHPMailer class or legacy mode? if (CHECK_PHPMAILER_USAGE()) { // Use PHPMailer class with SMTP enabled require_once(PATH."inc/phpmailer/class.phpmailer.php"); require_once(PATH."inc/phpmailer/class.smtp.php"); // get new instance $mail = new PHPMailer(); $mail->PluginDir = sprintf("%sinc/phpmailer/", PATH); $mail->IsSMTP(); $mail->SMTPAuth = true; $mail->Host = SMTP_HOSTNAME; $mail->Port = 25; $mail->Username = SMTP_USER; $mail->Password = SMTP_PASSWORD; if (empty($from)) { $mail->From = WEBMASTER; } else { $mail->From = $from; } $mail->FromName = MAIN_TITLE; $mail->Subject = $subject; if ((EXT_IS_ACTIVE("html_mail")) && (strip_tags($msg) != $msg)) { $mail->Body = $msg; $mail->AltBody = "Your mail program required HTML support to read this mail!"; $mail->WordWrap = 70; $mail->IsHTML(true); } else { $mail->Body = html_entity_decode($msg); } $mail->AddAddress($to, ""); $mail->AddReplyTo(WEBMASTER,MAIN_TITLE); $mail->AddCustomHeader("Errors-To:".WEBMASTER); $mail->AddCustomHeader("X-Loop:".WEBMASTER); $mail->Send(); } else { // Use legacy mail() command @mail($to, $subject, html_entity_decode($msg), $from); } } // // Generate a password in a specified length or use default password length function GEN_PASS($LEN = 0) { global $_CONFIG; if ($LEN == 0) $LEN = $_CONFIG['pass_len']; // Initialize array with all allowed chars $ABC = explode(",", "a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,0,1,2,3,4,5,6,7,8,9,-,+,_,/"); // Initialize randomizer mt_srand((double) microtime() * 1000000); // Start creating password $PASS = ""; for ($i = 0; $i < $LEN; $i++) { $PASS .= $ABC[mt_rand(0, sizeof($ABC) -1)]; } // When the size is below 40 we can also add additional security by scrambling it if (strlen($PASS) <= 40) { // Also scramble the password $PASS = scrambleString($PASS); } // Return the password return $PASS; } // function MAKE_DATETIME ($time, $mode="0") { if ($time == 0) { // Never happend return NEVER_HAPPENED; } else { // Filter out numbers $time = bigintval($time); } switch (GET_LANGUAGE()) { case "de": // German date / time format switch ($mode) { case "0": $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break; case "1": $ret = strtolower(date("d.m.Y - H:i", $time)); break; case "2": $ret = date("d.m.Y|H:i", $time); break; case "3": $ret = date("d.m.Y", $time); break; } break; default: // Default is the US date / time format! switch ($mode) { case "0": $ret = date("r", $time); break; case "1": $ret = date("Y-m-d - g:i A", $time); break; case "2": $ret = date("y-m-d|H:i", $time); break; case "3": $ret = date("y-m-d", $time); break; } } return $ret; } // Translates the american decimal dot into a german comma function TRANSLATE_COMMA ($dotted, $cut=true) { global $_CONFIG; // Default is 3 you can change this in admin area "Misc -> Misc Options" if (empty($_CONFIG['max_comma'])) $_CONFIG['max_comma'] = "3"; $maxComma = $_CONFIG['max_comma']; // Cut zeros off? if ($cut) { // Test for commata if in cut-mode $com = explode(".", $dotted); if (count($com) > 1) { // Commata found, so only zeros? if ($com[1] == str_repeat("0", strlen($com[1]))) { // Only zeros, so display only one $maxComma = 1; } // END - if } else { // Don't display commatas even if there are none... ;-) $maxComma = 0; } } // END - if // Debug log //DEBUG_LOG(__FUNCTION__.":dotted={$dotted},maxComma={$maxComma}"); // Translate it now switch (GET_LANGUAGE()) { case "de": $dotted = number_format($dotted, $maxComma, ",", "."); break; default: $dotted = number_format($dotted, $maxComma, ".", ","); break; } // Return translated value return $dotted; } // function DEREFERER ($URL) { // Don't de-refer our own links! if (substr($URL, 0, strlen(URL)) != URL) { // De-refer this link $URL = URL."/modules.php?module=loader&url=".urlencode(base64_encode(gzcompress($URL))); } // END - if // Return link return $URL; } // function TRANSLATE_GENDER ($gender) { switch ($gender) { case "M": $ret = GENDER_M; break; case "F": $ret = GENDER_F; break; case "C": $ret = GENDER_C; break; default : $ret = $gender; break; } return $ret; } // function FRAMETESTER($URL) { // Prepare frametester URL $frametesterUrl = sprintf("%s/modules.php?module=frametester&url=%s", URL, urlencode(base64_encode(gzcompress(COMPILE_CODE($URL)))) ); return $frametesterUrl; } // function SELECTION_COUNT($array) { $ret = 0; if (is_array($array)) { foreach ($array as $key => $sel) { if (!empty($sel)) $ret++; } } return $ret; } // function IMG_CODE ($code, $type, $DATA, $uid) { return "\"Code\""; } // function TRANSLATE_STATUS($status) { switch ($status) { case "UNCONFIRMED": $ret = ACCOUNT_UNCONFIRMED; break; case "CONFIRMED": $ret = ACCOUNT_CONFIRMED; break; case "LOCKED": $ret = ACCOUNT_LOCKED; break; case "": case null: $ret = ACCOUNT_DELETED; break; default: $ret = UNKNOWN_STATUS_1.$status.UNKNOWN_STATUS_2; break; } return $ret; } // function GET_LANGUAGE() { if (!empty($_GET['mx_lang'])) { // Accept only first 2 chars $lang = substr($_GET['mx_lang'], 0, 2); } else { // Do nothing $lang = ""; } // Set default return value to default language from config $ret = DEFAULT_LANG; // Check GET variable and cookie if (!empty($lang)) { // Check if main language file does exist if (FILE_READABLE(PATH."inc/language/".$lang.".php")) { // Okay found, so let's update cookies SET_LANGUAGE($lang); } } elseif (!isSessionVariableSet('mx_lang')) { // Return stored value from cookie $ret = get_session('mx_lang'); // Fixes a warning before the session has the mx_lang constant if (empty($ret)) $ret = DEFAULT_LANG; } return $ret; } // function SET_LANGUAGE($lang) { global $_CONFIG; // Accept only first 2 chars! $lang = substr(SQL_ESCAPE(strip_tags($lang)), 0, 2); // Set cookie set_session("mx_lang", $lang); } // function LOAD_EMAIL_TEMPLATE($template, $content=array(), $UID="0") { global $DATA, $_CONFIG, $REPLACER; // Make sure all template names are lowercase! $template = strtolower($template); // Default "nickname" if extension is not installed $nick = "---"; // Keept for backward-compatiblity (please replace these variables against our new {!CONST!} syntax!) // No longer used: $MAIN_TITLE = MAIN_TITLE; $URL = URL; $WEBMASTER = WEBMASTER; // Prepare IP number and User Agent $REMOTE_ADDR = GET_REMOTE_ADDR(); $HTTP_USER_AGENT = GET_USER_AGENT(); // Default admin $ADMIN = MAIN_TITLE; // Is the admin logged in? if (IS_ADMIN()) { // Load Admin data $ADMIN = GET_ADMIN_EMAIL(get_session('admin_login')); } // END - if // Neutral email address is default $email = WEBMASTER; // Expiration in a nice output format if ($_CONFIG['auto_purge'] == 0) { // Will never expire! $EXPIRATION = MAIL_WILL_NEVER_EXPIRE; } elseif (function_exists('CREATE_FANCY_TIME')) { // Create nice date string $EXPIRATION = CREATE_FANCY_TIME($_CONFIG['auto_purge']); } else { // Display days only $EXPIRATION = round($_CONFIG['auto_purge']/60/60/24)." "._DAYS; } // Is content an array? if (is_array($content)) { // Add expiration to array, $EXPIRATION is now deprecated! $content['expiration'] = $EXPIRATION; } // END - if // Load user's data //* DEBUG: */ print __FUNCTION__."(".__LINE__."):UID={$UID},template={$template}
\n"; if ($UID > 0) { if (EXT_IS_ACTIVE("nickname")) { //* DEBUG: */ print __FUNCTION__."(".__LINE__."):NICKNAME!
\n"; // Load nickname $result = SQL_QUERY_ESC("SELECT surname, family, gender, email, nickname FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1", array(bigintval($UID)), __FILE__, __LINE__); } else { //* DEBUG: */ print __FUNCTION__."(".__LINE__."):NO-NICK!
\n"; /// Load normal data $result = SQL_QUERY_ESC("SELECT surname, family, gender, email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1", array(bigintval($UID)), __FILE__, __LINE__); } // Is content an array? //* DEBUG: */ print __FUNCTION__."(".__LINE__."):content[]=".gettype($content)."
\n"; if (is_array($content)) { // Fetch and migrate data //* DEBUG: */ print __FUNCTION__."(".__LINE__."):content()=".count($content)." - PRE
\n"; $content = array_merge($content, SQL_FETCHARRAY($result)); //* DEBUG: */ print __FUNCTION__."(".__LINE__."):content()=".count($content)." - AFTER
\n"; } // END - if // Free result SQL_FREERESULT($result); } // END - if // Translate M to male or F to female if present if (isset($content['gender'])) $content['gender'] = TRANSLATE_GENDER($content['gender']); // Overwrite email from data if present if (isset($content['email'])) $email = $content['email']; // Store email for some functions in global data array $DATA['email'] = $email; // Base directory $BASE = sprintf("%stemplates/%s/emails/", PATH, GET_LANGUAGE()); // Check for admin/guest/member templates if (strpos($template, "admin_") > -1) { // Admin template found $file = $BASE."admin/".$template.".tpl"; } elseif (strpos($template, "guest_") > -1) { // Guest template found $file = $BASE."guest/".$template.".tpl"; } elseif (strpos($template, "member_") > -1) { // Member template found $file = $BASE."member/".$template.".tpl"; } else { // Test for extension $test = substr($template, 0, strpos($template, "_")); if (EXT_IS_ACTIVE($test)) { // Set extra path to extension's name $file = $BASE.$test."/".$template.".tpl"; } else { // No special filename $file = $BASE.$template.".tpl"; } } // Does the special template exists? if (!FILE_READABLE($file)) { // Reset to default template $file = $BASE.$template.".tpl"; } // END - if // Now does the final template exists? $newContent = ""; if (FILE_READABLE($file)) { // The local file does exists so we load it. :) $tmpl_file = implode("", file($file)); $tmpl_file = addslashes($tmpl_file); // Run code $tmpl_file = "\$newContent=html_entity_decode(\"".COMPILE_CODE($tmpl_file)."\");"; @eval($tmpl_file); } elseif (!empty($template)) { // Template file not found! $newContent = TEMPLATE_404.": ".$template."
".TEMPLATE_CONTENT."
".print_r($content, true)."
".TEMPLATE_DATA."
".print_r($DATA, true)."


"; // Debug mode not active? Then remove the HTML tags if (!DEBUG_MODE) $newContent = strip_tags($newContent); } else { // No template name supplied! $newContent = NO_TEMPLATE_SUPPLIED; } // Is there some content? if (empty($newContent)) { // Compiling failed $newContent = "Compiler error for template {$template}!\nUncompiled content:\n".$tmpl_file; if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx."; } // END - if // Return compiled content return COMPILE_CODE($newContent); } // function MAKE_TIME($H, $M, $S, $stamp) { // Extract day, month and year from given timestamp $DAY = date("d", $stamp); $MONTH = date("m", $stamp); $YEAR = date('Y', $stamp); // Create timestamp for wished time which depends on extracted date return mktime($H, $M, $S, $MONTH, $DAY, $YEAR); } // function LOAD_URL($URL, $addUrlData=true) { global $CSS, $_CONFIG, $footer; // Check if http(s):// is there if ((substr($URL, 0, 7) != "http://") && (substr($URL, 0, 8) != "https://")) { // Make all URLs full-qualified $URL = URL."/".$URL; } // Compile out URI codes $URL = COMPILE_CODE($URL); // Get output buffer $OUTPUT = ob_get_contents(); // Clear it only if there is content if (!empty($OUTPUT)) { ob_end_clean(); } // END - if // Add some data to URL if cookies are not accepted if (((!defined('__COOKIES')) || (!__COOKIES)) && ($addUrlData)) $URL = ADD_URL_DATA($URL); // Probe for bot from search engine if ((eregi("spider", GET_USER_AGENT())) || (eregi("bot", GET_USER_AGENT())) || (eregi("spider", GET_USER_AGENT()))) { // Search engine bot detected so let's rewrite many chars for the link $URL = htmlentities(strip_tags($URL), ENT_QUOTES); // Output new location link as anchor OUTPUT_HTML("".$URL.""); } elseif (!headers_sent()) { // Load URL when headers are not sent /* print("
");
		debug_print_backtrace();
		die("
URL={$URL}"); */ @header ("Location: ".str_replace("&", "&", $URL)); } else { // Output error message include(PATH."inc/header.php"); LOAD_TEMPLATE("redirect_url", false, str_replace("&", "&", $URL)); include(PATH."inc/footer.php"); } exit(); } // function COMPILE_CODE($code, $simple = false, $constants = true, $full = true) { global $SEC_CHARS, $URL_CHARS; // Is the code a string? if (!is_string($code)) { // Silently return it return $code; } // END - if $ARRAY = $SEC_CHARS; // Select smaller set of chars to replace when we e.g. want to compile URLs if (!$full) $ARRAY = $URL_CHARS; // Compile constants if ($constants) { // BEFORE 0.2.1 : Language and data constants // WITH 0.2.1+ : Only language constants $code = str_replace('{--','".', str_replace('--}','."', $code)); // BEFORE 0.2.1 : Not used // WITH 0.2.1+ : Data constants $code = str_replace('{!','".', str_replace("!}", '."', $code)); } // END - if // Compile QUOT and other non-HTML codes foreach ($ARRAY['to'] as $k => $to) { // Do the reversed thing as in inc/libs/security_functions.php $code = str_replace($to, $ARRAY['from'][$k], $code); } // END - foreach // But shall I keep simple quotes for later use? if ($simple) $code = str_replace("\'", '{QUOT}', $code); // Find $content[bla][blub] entries @preg_match_all('/\$(content|DATA)((\[([a-zA-Z0-9-_]+)\])*)/', $code, $matches); // Are some matches found? if ((count($matches) > 0) && (count($matches[0]) > 0)) { // Replace all matches $matchesFound = array(); foreach ($matches[0] as $key => $match) { // Fuzzy look has failed by default $fuzzyFound = false; // Fuzzy look on match if already found foreach ($matchesFound as $found => $set) { // Get test part $test = substr($found, 0, strlen($match)); // Does this entry exist? //* DEBUG: */ print __FUNCTION__."(".__LINE__."):found={$found},match={$match},set={$set}
\n"; if ($test == $match) { // Match found! //* DEBUG: */ print __FUNCTION__."(".__LINE__."):fuzzyFound!
\n"; $fuzzyFound = true; break; } // END - if } // END - foreach // Skip this entry? if ($fuzzyFound) continue; // Take all string elements if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_".$matches[4][$key]]))) { // Replace it in the code //* DEBUG: */ print __FUNCTION__."(".__LINE__."):key={$key},match={$match}
\n"; $newMatch = str_replace("[".$matches[4][$key]."]", "['".$matches[4][$key]."']", $match); $code = str_replace($match, "\".".$newMatch.".\"", $code); $matchesFound[$key."_".$matches[4][$key]] = 1; $matchesFound[$match] = 1; } elseif (!isset($matchesFound[$match])) { // Not yet replaced! //* DEBUG: */ print __FUNCTION__."(".__LINE__."):match={$match}
\n"; $code = str_replace($match, "\".".$match.".\"", $code); $matchesFound[$match] = 1; } } // END - foreach } // END - if // Return compiled code return $code; } // /************************************************************************ * * * Gaenderter Sortier-Algorythmus, $array wird nach dem Array (!) * * $a_sort sortiert: * * * * $array - Das 3-dimensionale Array, das paralell sortiert werden soll * * $a_sort - Array, das die Sortiereihenfolge der ersten Elementeben * * $primary_key - Prim.rschl.ssel aus $a_sort, nach dem sortiert wird * * $order - Sortiereihenfolge: -1 = A-Z, 0 = keine, 1 = Z-A * * $nums - true = Als Zahlen sortieren, false = Als Zeichen sortieren * * * * $a_sort muss Elemente enthalten, deren Wert Schluessel von $array * * sind... Klingt kompliziert, suchen Sie mal mein Beispiel, dann sehen * * Sie, dass es doch nicht so schwer ist! :-) * * * ************************************************************************/ function array_pk_sort(&$array, $a_sort, $primary_key = 0, $order = -1, $nums = false) { $dummy = $array; while ($primary_key < count($a_sort)) { foreach ($dummy[$a_sort[$primary_key]] as $key => $value) { foreach ($dummy[$a_sort[$primary_key]] as $key2 => $value2) { $match = false; if (!$nums) { // Sort byte-by-byte (also numbers will be interpreted as chars! E.g.: "9" > "10") if (($key != $key2) && (strcmp(strtolower($dummy[$a_sort[$primary_key]][$key]), strtolower($dummy[$a_sort[$primary_key]][$key2])) == $order)) $match = true; } elseif ($key != $key2) { // Sort numbers (E.g.: 9 < 10) if (($dummy[$a_sort[$primary_key]][$key] < $dummy[$a_sort[$primary_key]][$key2]) && ($order == -1)) $match = true; if (($dummy[$a_sort[$primary_key]][$key] > $dummy[$a_sort[$primary_key]][$key2]) && ($order == 1)) $match = true; } if ($match) { // We have found two different values, so let's sort whole array foreach ($dummy as $sort_key => $sort_val) { $t = $dummy[$sort_key][$key]; $dummy[$sort_key][$key] = $dummy[$sort_key][$key2]; $dummy[$sort_key][$key2] = $t; unset($t); } // END - foreach } // END - if } // END - foreach } // END - foreach // Count one up $primary_key++; } // END - while // Write back sorted array $array = $dummy; } // function ADD_SELECTION($type, $DEFAULT, $prefix="", $id="0") { global $MONTH_DESCR; $OUT = ""; if ($type == "yn") { // This is a yes/no selection only! if ($id > 0) $prefix .= "[".$id."]"; $OUT .= " \n"; } switch ($type) { case "day": // Day for ($idx = 1; $idx < 32; $idx++) { $OUT .= "\n"; } } else { // Get current year and subtract 16 (for erotic content) $OUT .= "\n"; $YEAR = date('Y', time()) - 16; for ($idx = 1930; $idx <= $YEAR; $idx++) { $OUT .= "