// Do we need to remove update depency?
if (countExtensionUpdateDependencies() > 0) {
// Then find all updates we shall no longer execute
- foreach (getExtensionUpdateDependencies() as $id=>$ext_name) {
+ foreach (getExtensionUpdateDependencies() as $id => $ext_name) {
// Shall we remove this update?
if (in_array($ext_name, getExtensionRemovalList())) {
// Then remove this extension!
// Is the config valid?
if (isConfigEntrySet($matches[1][$key])) {
// Set it for caching
- $GLOBALS['compile_config'][$matches[1][$key]] = "\".getConfig('" . $matches[1][$key] . "').\"";
+ $GLOBALS['compile_config'][$matches[1][$key]] = "\" . getConfig('" . $matches[1][$key] . "') . \"";
} elseif (isConfigEntrySet('default_' . strtoupper($matches[1][$key]))) {
// Use default value
- $GLOBALS['compile_config'][$matches[1][$key]] = "\".getConfig('" . 'DEFAULT_' . strtoupper($matches[1][$key]) . "').\"";
+ $GLOBALS['compile_config'][$matches[1][$key]] = "\" . getConfig('" . 'DEFAULT_' . strtoupper($matches[1][$key]) . "') . \"";
} elseif (isMessageIdValid('DEFAULT_' . strtoupper($matches[1][$key]))) {
// No config, try the language system
- $GLOBALS['compile_config'][$matches[1][$key]] = "\".getMessage('". 'DEFAULT_' . strtoupper($matches[1][$key]) . "').\"";
+ $GLOBALS['compile_config'][$matches[1][$key]] = "\" . getMessage('". 'DEFAULT_' . strtoupper($matches[1][$key]) . "') . \"";
} else {
// Unhandled!
$GLOBALS['compile_config'][$matches[1][$key]] = '!' . $matches[1][$key] . '!';
if ($compiled === true) {
// Run the code
$eval = "\$GLOBALS['compiled_config'][\$uncompiled] = \"" . $GLOBALS['compiled_config'][$uncompiled] . "\";";
- //* DEBUG: */ print '<pre>' . str_replace('$', '$', htmlentities($eval)) . '</pre>';
+ //* DEBUG: */ print('<pre>' . str_replace('$', '$', htmlentities($eval)) . '</pre>');
eval($eval);
} // END - if
return $GLOBALS['compiled_config'][$uncompiled];
}
-// Filter for compiling extension data
-function FILTER_COMPILE_EXTENSION ($code) {
- // Compile {%cmd=some_value%} to get extension data
- // Support cmd is:
- // - version -> getExtensionVersion() call
- preg_match_all('/\{%((([a-zA-Z0-9-_]+)=([a-zA-Z0-9-_]+))*)\%\}/', $code, $matches);
+// Filter for compiling expression code
+function FILTER_COMPILE_EXPRESSION_CODE ($code) {
+ // Compile {%cmd=some_value%} to get expression code snippets
+ // See switch() command below for supported commands
+ preg_match_all('/\{%(([a-zA-Z0-9-_,]+)(=([^\}]+)){0,1})*%\}/', $code, $matches);
+ //* DEBUG: */ print('<pre>'.print_r($matches, true).'</pre>');
+
+ // Default is from OUTPUT_HTML
+ $outputMode = getOutputMode();
// Some entries found?
if ((count($matches) > 0) && (count($matches[3]) > 0)) {
// Replace all matches
- foreach ($matches[3] as $key => $cmd) {
- // Init replacer variable
+ foreach ($matches[2] as $key => $cmd) {
+ // Init replacer/call-back variable
$replacer = '';
+ $callback = '';
+ $extraFunction = '';
- // Is the extension installed or code provided?
- if ($cmd == 'code') {
- // Code asked for
- $replacer = "\".getCode(\"" . $matches[4][$key] . "\").\"";
- } else {
- // Construct call-back function name
- $functionName = 'getExtension' . ucfirst(strtolower($cmd));
+ // Extract command and call-back
+ $cmdArray = explode(',', $cmd);
+ $cmd = $cmdArray[0];
+ if (isset($cmdArray[1])) $callback = $cmdArray[1];
+ if (isset($cmdArray[2])) $extraFunction = $cmdArray[2];
- // Construct call of the function
- $replacer = "\".call_user_func_array('" . $functionName . "', array('" . $matches[4][$key] . "', true)).\"";
- }
+ // Is the extension installed or code provided?
+ // @TODO This whole switch-block is very static
+ switch ($cmd) {
+ case 'code': // Code asked for
+ $code = str_replace($matches[0][$key], "\" . getCode('" . $matches[4][$key] . "') . \"", $code);
+ break;
+
+ case 'url':
+ // Do we have JS-mode?
+ if (substr($cmd, -2, 2) == 'js') $outputMode = 1;
+
+ // Handle an URL here
+ $replacer = "\" . encodeUrl(\"" . $matches[4][$key] . "\", " . $outputMode . ") . \"";
+
+ // Replace it
+ $code = str_replace($matches[0][$key], $replacer, $code);
+ break;
+
+ case 'server':
+ // This will make 'foo_bar' to detectFooBar()
+ $functionName = "'detect' . implode('', array_map('ucfirst', explode('_', '" . $callback . "')))";
+
+ // Replace it
+ $code = str_replace($matches[0][$key], "\" . call_user_func(" . $functionName . ") . \"", $code);
+ break;
+
+ case 'user':
+ // Use current userid by default
+ $functionName = 'getMemberId()';
+
+ // User-related data, so is there a userid?
+ if (!empty($matches[4][$key])) {
+ // Do we have a userid or $userid?
+ if ($matches[4][$key] == '$userid') {
+ // Use dynamic call
+ $functionName = "getFetchedUserData('userid', \$userid, '" . $callback . "')";
+ } elseif ($matches[4][$key] > 0) {
+ // User data found
+ $functionName = "getFetchedUserData('userid', " . $matches[4][$key] . ", " . $callback . "')";
+ } // END - if
+ } elseif ((!empty($callback)) && (isUserDataValid())) {
+ // "Call-back" alias column for current logged in user's data
+ $functionName = "getUserData('" . $callback . "')";
+ }
- // Replace it and insert parameter for GET request
- $code = str_replace($matches[0][$key], sprintf("&%s=%s&rev=\".getConfig('CURR_SVN_REVISION').\"", $cmd, $replacer), $code);
+ // Do we have another function to run (e.g. translations)
+ if (!empty($extraFunction)) {
+ // Surround the original function call with it
+ $functionName = $extraFunction . '(' . $functionName . ')';
+ } // END - if
+
+ // Now replace the code
+ $code = str_replace($matches[0][$key], "\" . " . $functionName . " . \"", $code);
+ break;
+
+ case 'ext':
+ // Not installed is default
+ $replacer = 'false';
+
+ // Is the extension installed?
+ if (isExtensionInstalled($matches[4][$key])) {
+ // Construct call-back function name
+ $functionName = 'getExtension' . ucfirst(strtolower($callback));
+
+ // Construct call of the function
+ $replacer = "\" . call_user_func_array('" . $functionName . "', array('" . $matches[4][$key] . "', true)) . \"";
+ } // END - if
+
+ // Replace it and insert parameter for GET request
+ $code = str_replace($matches[0][$key], sprintf("&ext=%s&ver=%s&rev=\" . getConfig('CURR_SVN_REVISION') . \"", $matches[4][$key], $replacer), $code);
+ break;
+
+ case 'config': // @TODO FILTER_COMPILE_CONFIG does not handle call-back functions so we handle it here again
+ // Read configuration
+ $configValue = getConfig($matches[4][$key]);
+
+ // Do we have a call-back?
+ if (!empty($callback)) {
+ // Parse it through this function
+ $configValue = call_user_func_array($callback, array($configValue));
+ } // END - if
+
+ // Replace the config entry
+ $code = str_replace($matches[0][$key], $configValue, $code);
+ break;
+
+ case 'filter':
+ // Construct replacement
+ $replacer = "\" . runFilterChain('" . $matches[4][$key] . "') . \"";
+
+ // Run the filter and insert result
+ $code = str_replace($matches[0][$key], $replacer, $code);
+ break;
+
+ default:
+ // Unsupported command detected
+ debug_report_bug('Command=' . $cmd . ', callback=' . $callback . ', extra=' . $extraFunction . ' is unsupported.');
+ break;
+ } // END - switch
} // END - foreach
} // END - if
+ // Do we have non-HTML mode?
+ if ((getOutputMode() != '0') || ($outputMode != '0')) $code = decodeEntities($code);
+
// Return compiled code
- //* DEBUG: */ die('<pre>'.secureString($code).'</pre>');
+ //* DEBUG: */ die('<pre>'.htmlentities($code).'</pre>');
return $code;
}
// Is the reset set or old sql_patches?
if (((!isResetModeEnabled()) || (!isExtensionInstalled('sql_patches'))) && (getOutputMode() == '0')) {
// Then abort here
- logDebugMessage(__FUNCTION__, __LINE__, 'Cannot run reset! Please report this bug. Thanks');
+ debug_report_bug('Cannot run reset! enabled='.intval(isResetModeEnabled()).',ext='.intval(isExtensionInstalled('sql_patches')).' Please report this bug. Thanks');
} // END - if
// Get more daily reset scripts
// Fix module
if (!isModuleSet()) {
// Is the request element set?
- if (isGetRequestElementSet('module')) {
+ if (isGetRequestParameterSet('module')) {
// Set module from request
- setModule(getRequestElement('module'));
+ setModule(getRequestParameter('module'));
} elseif (getOutputMode() == '0') {
// Set default module 'index'
setModule('index');
// Filter for running daily reset
function FILTER_RUN_DAILY_RESET () {
// Only execute this filter if installed
- if ((!isInstalled()) || (!isAdminRegistered())) return;
+ if ((isInstallationPhase()) || (!isInstalled()) || (!isAdminRegistered()) || (!isExtensionInstalled('sql_patches'))) return;
// Shall we run the reset scripts? If a day has changed, maybe also a week/month has changed... Simple! :D
- // 012 3 4 43 3 4432 2 3 3 21 1 221 1 221 1 2 21 1 22 10
- if (((date('d', getConfig('last_update')) != date('d', time())) || ((isConfigEntrySet('DEBUG_RESET')) && (getConfig('DEBUG_RESET') == 'Y'))) && (!isInstallationPhase()) && (isAdminRegistered()) && (!isGetRequestElementSet('register')) && (getOutputMode() != 1)) {
+ if (((date('d', getConfig('last_update')) != date('d', time())) || ((isConfigEntrySet('DEBUG_RESET')) && (getConfig('DEBUG_RESET') == 'Y'))) && (!isInstallationPhase()) && (isAdminRegistered()) && (!isGetRequestParameterSet('register')) && (getOutputMode() != 1)) {
// Tell every module we are in reset-mode!
doReset();
} // END - if
// Filter for displaying copyright line
function FILTER_DISPLAY_COPYRIGHT () {
// Shall we display the copyright notice?
- if ((!isGetRequestElementSet('frame')) && (basename($_SERVER['PHP_SELF']) != 'mailid_top.php') && ((getConfig('WRITE_FOOTER') == 'Y') || (isInstalling())) && ($GLOBALS['header_sent'] == 2)) {
+ if ((!isGetRequestParameterSet('frame')) && (basename($_SERVER['PHP_SELF']) != 'mailid_top.php') && ((getConfig('WRITE_FOOTER') == 'Y') || (isInstalling())) && ($GLOBALS['header_sent'] == 2)) {
// Backlink enabled?
if (((isConfigEntrySet('ENABLE_BACKLINK')) && (getConfig('ENABLE_BACKLINK') == 'Y')) || (isInstalling())) {
// Copyright with backlink, thanks! :-)
- loadTemplate('copyright_backlink');
+ $GLOBALS['page_footer'] .= loadTemplate('copyright_backlink', true);
} else {
// No backlink in Copyright note
- loadTemplate('copyright');
+ $GLOBALS['page_footer'] .= loadTemplate('copyright', true);
}
} // END - if
}
function FILTER_DISPLAY_PARSING_TIME () {
// Shall we display the parsing time and number of queries?
// 1234 5 54 4 5 5 4 4 5 543 3 4432 2 33 2 2 21
- if ((((isExtensionInstalledAndNewer('sql_patches', '0.4.1')) && (getConfig('show_timings') == 'Y') && (!isGetRequestElementSet('frame'))) || (isInstallationPhase())) && (getOutputMode() == '0') && ($GLOBALS['header_sent'] == 2)) {
+ if ((((isExtensionInstalledAndNewer('sql_patches', '0.4.1')) && (getConfig('show_timings') == 'Y') && (!isGetRequestParameterSet('frame'))) || (isInstallationPhase())) && (getOutputMode() == '0') && ($GLOBALS['header_sent'] == 2)) {
// Then display it here
displayParsingTime();
} // END - if
// Do we have cached eval() data?
if ((isset($GLOBALS['template_eval'])) && (count($GLOBALS['template_eval']) > 0)) {
// Now flush all
- foreach ($GLOBALS['template_eval'] as $template=>$eval) {
+ foreach ($GLOBALS['template_eval'] as $template => $eval) {
// Flush the cache (if not yet found)
flushTemplateCache($template, $eval);
} // END - if
} // END - if
}
+// Filter for loading user data
+function FILTER_FETCH_USER_DATA ($userid = 0) {
+ // Is the userid not set? Then use member id
+ if (($userid == '0') || (is_null($userid))) $userid = getMemberId();
+
+ // Get user data
+ if (!fetchUserData($userid)) {
+ // Userid is not valid
+ debug_report_bug('User id '.$userid . ' is invalid.');
+ } // END - if
+
+ // Set member id
+ setMemberId($userid);
+}
+
+// Filter for reseting users' last login failure, only available with latest ext-sql_patches
+function FILTER_RESET_USER_LOGIN_FAILURE () {
+ // Is the user data valid?
+ if (!isMember()) {
+ // Do only run for logged in members
+ debug_report_bug('Please only run this filter for logged in users.');
+ } // END - if
+
+ // Remmeber login failures if available
+ if (isExtensionInstalledAndNewer('sql_patches', '0.6.1')) {
+ // Reset login failures
+ SQL_QUERY_ESC("UPDATE
+ `{?_MYSQL_PREFIX?}_user_data`
+SET
+ `login_failures`=0,
+ `last_failure`='0000-00-00 00:00:00'
+WHERE
+ `userid`=%s
+LIMIT 1",
+ array(getMemberId()), __FILE__, __LINE__);
+
+ // Store it in session
+ setSession('mxchange_member_failures' , getUserData('login_failures'));
+ setSession('mxchange_member_last_fail', getUserData('last_failure'));
+ } // END - if
+}
+
// [EOF]
?>
projects / mailer.git / blobdiff