************************************************************************/
// Some security stuff...
-if (ereg(basename(__FILE__), $_SERVER['PHP_SELF'])) {
+if (!defined('__SECURITY')) {
$INC = substr(dirname(__FILE__), 0, strpos(dirname(__FILE__), "/inc") + 4)."/security.php";
require($INC);
}
// Check if our config file is writeable or not
function is_INCWritable($inc) {
- $fp = @fopen(PATH."inc/".$inc.".php", 'a');
+ // Generate FQFN
+ $fqfn = sprintf("%sinc/%s.php", PATH, $inc);
+
+ // Abort by simple test
+ if ((FILE_READABLE($fqfn)) && (!is_writeable($fqfn))) {
+ return false;
+ } // END - if
+
+ // Test if we can append data
+ $fp = @fopen($fqfn, 'a');
if ($inc == "dummy") {
// Remove dummy file
@fclose($fp);
- return @unlink(PATH."inc/dummy.php");
+ return @unlink($fqfn);
} else {
// Close all other files
return @fclose($fp);
default:
// Huh, something goes wrong or maybe you have edited config.php ???
- die ("<STRONG>".FATAL_ERROR.":</STRONG> ".LANG_NO_RENDER_DIRECT);
+ DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid renderer %s detected.", OUTPUT_MODE));
+ MXCHANGE_DIE("<STRONG>".FATAL_ERROR.":</STRONG> ".LANG_NO_RENDER_DIRECT);
break;
}
} elseif ((_OB_CACHING == "on") && ($footer == 1)) {
// Clear output buffer for later output
ob_end_clean();
- if ((EXT_IS_ACTIVE("rewrite", true)) && (function_exists('REWRITE_LINKS')) && ($CSS != "1") && ($CSS != "-1")) {
+ // Send HTTP header
+ header("HTTP/1.1 200");
+
+ // Used later
+ $now = gmdate('D, d M Y H:i:s') . ' GMT';
+
+ // General headers for no caching
+ header("Expired: " . $now); // RFC2616 - Section 14.21
+ header("Last-Modified: " . $now);
+ header("Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0"); // HTTP/1.1
+ header("Pragma: no-cache"); // HTTP/1.0
+ header("Connection: Close");
+
+ // Extension "rewrite" installed?
+ if ((EXT_IS_ACTIVE("rewrite")) && (function_exists('REWRITE_LINKS')) && ($CSS != "1") && ($CSS != "-1")) {
$OUTPUT = REWRITE_LINKS($OUTPUT);
- }
+ } // END - if
// Compile and run finished rendered HTML code
while (strpos($OUTPUT, '{!') > 0) {
$eval = "\$newContent = \"".COMPILE_CODE(addslashes($OUTPUT))."\";";
@eval($eval);
+ // Was that eval okay?
if (empty($newContent)) {
// Something went wrong!
die("Evaluation error:<pre>".htmlentities($eval)."</pre>");
- }
+ } // END - if
$OUTPUT = $newContent;
- }
+ } // END - while
// Output code here, DO NOT REMOVE! ;-)
OUTPUT_RAW($OUTPUT);
} elseif ((OUTPUT_MODE == "render") && (!empty($OUTPUT))) {
// Rewrite links when rewrite extension is active
- if ((EXT_IS_ACTIVE("rewrite", true)) && (function_exists('REWRITE_LINKS')) && ($CSS != "1") && ($CSS != "-1")) {
+ if ((EXT_IS_ACTIVE("rewrite")) && (function_exists('REWRITE_LINKS')) && ($CSS != "1") && ($CSS != "-1")) {
$OUTPUT = REWRITE_LINKS($OUTPUT);
- }
+ } // END - if
// Compile and run finished rendered HTML code
while (strpos($OUTPUT, '{!') > 0) {
$eval = "\$OUTPUT = \"".COMPILE_CODE(addslashes($OUTPUT))."\";";
eval($eval);
- }
+ } // END - while
// Output code here, DO NOT REMOVE! ;-)
OUTPUT_RAW($OUTPUT);
// Output the raw HTML code
function OUTPUT_RAW ($HTML) {
// Output stripped HTML code to avoid broken JavaScript code, etc.
- echo stripslashes($HTML);
+ echo stripslashes(stripslashes($HTML));
// Flush the output if only _OB_CACHING is not "on"
if (_OB_CACHING != "on") {
// Flush it
flush();
- }
+ } // END - if
}
// Add a fatal error message to the queue array
function ADD_FATAL ($message, $extra="") {
global $FATAL;
+
if (empty($extra)) {
// Regular text message to add to $FATAL
$FATAL[] = $message;
} else {
// $message is text with a mask plus extras to insert into the text
- $FATAL[] = sprintf($message, $extra);
+ $message = sprintf($message, $extra);
+ $FATAL[] = $message;
}
+
+ // Log fatal messages away
+ DEBUG_LOG(__FUNCTION__, __LINE__, " message={$message}");
}
// Load a template file and return it's content (only it's name; do not use ' or ")
-function LOAD_TEMPLATE($template, $return=false, $content="") {
+function LOAD_TEMPLATE($template, $return=false, $content=array()) {
// Add more variables which you want to use in your template files
global $DATA, $_CONFIG, $username;
$_CONFIG['num_templates']++;
// Init some data
- $ACTION = SQL_ESCAPE($GLOBALS['action']);
- $WHAT = SQL_ESCAPE($GLOBALS['what']);
$ret = "";
if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = 0;
- $REFID = $GLOBALS['refid'];
- // DEPRECATED!!!
+ // @DEPRECATED Try to rewrite the if() condition
if ($template == "member_support_form") {
// Support request of a member
- $result = SQL_QUERY_ESC("SELECT gender, surname, family, email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1",
- array($GLOBALS['userid']), __FILE__, __LINE__);
- list($gender, $surname, $family, $email) = SQL_FETCHROW($result);
-
- // Translate gender
- $gender = TRANSLATE_GENDER($gender);
+ $result = SQL_QUERY_ESC("SELECT userid, gender, surname, family, email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1",
+ array($GLOBALS['userid']), __FILE__, __LINE__);
- // Insert data if content is an array
+ // Is content an array?
if (is_array($content)) {
- // Please switch to $content[bla] in all your templates! Direct
- // variables are deprecated as of 09/13/2008.
- $content['gender'] = $gender;
- $content['surname'] = $surname;
- $content['family'] = $family;
- $content['email'] = $email;
- } // END - if
+ // Merge data
+ $content = array_merge($content, SQL_FETCHARRAY($result));
+
+ // Translate gender
+ $content['gender'] = TRANSLATE_GENDER($content['gender']);
+ } else {
+ // DEPRECATED: Load data in direct variables
+ list($gender, $surname, $family, $email) = SQL_FETCHROW($result);
+
+ // Translate gender
+ $gender = TRANSLATE_GENDER($gender);
+ DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("DEPRECATION-WARNING: content is not array (%s).", gettype($content)));
+ }
// Free result
SQL_FREERESULT($result);
- }
+ } // END - if
// Generate date/time string
$date_time = MAKE_DATETIME(time(), "1");
(".basename($file).")<br />
<br />
".TEMPLATE_CONTENT."
-<PRE>".print_r($content, true)."</PRE>
+<pre>".print_r($content, true)."</pre>
".TEMPLATE_DATA."
-<PRE>".print_r($DATA, true)."</PRE>
+<pre>".print_r($DATA, true)."</pre>
<br /><br />";
}
+ // Remove content and data
+ unset($content);
+ unset($DATA);
+
// Do we have some content to output or return?
if (!empty($ret)) {
// Not empty so let's put it out! ;)
}
// Send mail out to an email address
-function SEND_EMAIL($TO, $SUBJECT, $MSG, $HTML='N', $FROM="") {
+function SEND_EMAIL($TO, $SUBJECT, $MSG, $HTML = "N", $FROM = "") {
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$TO},SUBJECT={$SUBJECT}<br />\n";
+
// Compile subject line (for POINTS constant etc.)
- $eval = "\$SUBJECT = \"".COMPILE_CODE(addslashes($SUBJECT))."\";";
+ $eval = "\$SUBJECT = html_entity_decode(\"".COMPILE_CODE(addslashes($SUBJECT))."\");";
eval($eval);
- $SUBJECT = html_entity_decode($SUBJECT);
// Set from header
if ((!eregi("@", $TO)) && ($TO > 0)) {
- // Value detected, load email from database
+ // Value detected, is the message extension installed?
if (EXT_IS_ACTIVE("msg")) {
ADD_MESSAGE_TO_BOX($TO, $SUBJECT, $MSG, $HTML);
return;
} else {
+ // Load email address
$result_email = SQL_QUERY_ESC("SELECT email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1", array(bigintval($TO)), __FILE__, __LINE__);
- list($TO) = SQL_FETCHROW($result_email);
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):numRows=".SQL_NUMROWS($result_email)."<br />\n";
+
+ // Does the user exist?
+ if (SQL_NUMROWS($result_email)) {
+ // Load email address
+ list($TO) = SQL_FETCHROW($result_email);
+ } else {
+ // Set webmaster
+ $TO = WEBMASTER;
+ }
+
+ // Free result
SQL_FREERESULT($result_email);
}
- } elseif ($TO == 0) {
+ } elseif ("$TO" == "0") {
// Is the webmaster!
$TO = WEBMASTER;
}
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$TO}<br />\n";
- // Not in PHPMailer-Mode
+ // Check for PHPMailer or debug-mode
if (!CHECK_PHPMAILER_USAGE()) {
+ // Not in PHPMailer-Mode
if (empty($FROM)) {
// Load email header template
$FROM = LOAD_EMAIL_TEMPLATE("header");
}
}
+ // Compile "TO"
+ $eval = "\$TO = \"".COMPILE_CODE(addslashes($TO))."\";";
+ eval($eval);
+
+ // Compile "MSG"
+ $eval = "\$MSG = \"".COMPILE_CODE(addslashes($MSG))."\";";
+ eval($eval);
+
// Fix HTML parameter (default is no!)
if (empty($HTML)) $HTML = "N";
if (isBooleanConstantAndTrue('DEBUG_MODE')) {
// In debug mode we want to display the mail instead of sending it away so we can debug this part
- echo "<PRE>
+ echo "<pre>
".htmlentities(trim($FROM))."
To : ".$TO."
Subject : ".$SUBJECT."
Message : ".$MSG."
-</PRE>\n";
- } elseif (($HTML == "Y") && (EXT_IS_ACTIVE("html_mail", true))) {
+</pre>\n";
+
+ // Log the mail away
+ if (defined('DEBUG_MAIL')) DEBUG_LOG(__FUNCTION__, __LINE__, "to={$TO},subject={$SUBJECT},msg={$MSG}");
+ } elseif (($HTML == "Y") && (EXT_IS_ACTIVE("html_mail"))) {
// Send mail as HTML away
SEND_HTML_EMAIL($TO, $SUBJECT, $MSG, $FROM);
} elseif (!empty($TO)) {
- // Compile email
- $TO = COMPILE_CODE($TO);
-
// Send Mail away
- SEND_RAW_EMAIL($TO, COMPILE_CODE($SUBJECT), COMPILE_CODE($MSG), $FROM);
+ SEND_RAW_EMAIL($TO, $SUBJECT, $MSG, $FROM);
} elseif ($HTML == "N") {
// Problem found!
- SEND_RAW_EMAIL(WEBMASTER, COMPILE_CODE($SUBJECT), COMPILE_CODE($MSG), $FROM);
+ SEND_RAW_EMAIL(WEBMASTER, "[PROBLEM:]".$SUBJECT, $MSG, $FROM);
}
}
$mail->WordWrap = 70;
$mail->IsHTML(true);
} else {
- $mail->Body = $msg;
+ $mail->Body = html_entity_decode($msg);
}
$mail->AddAddress($to, "");
$mail->AddReplyTo(WEBMASTER,MAIN_TITLE);
$mail->Send();
} else {
// Use legacy mail() command
- @mail($to, $subject, $msg, $from);
+ @mail($to, $subject, html_entity_decode($msg), $from);
}
}
//
$PASS = "";
for ($i = 0; $i < $LEN; $i++) {
$PASS .= $ABC[mt_rand(0, sizeof($ABC) -1)];
- }
+ } // END - for
// When the size is below 40 we can also add additional security by scrambling it
if (strlen($PASS) <= 40) {
// Also scramble the password
$PASS = scrambleString($PASS);
- }
+ } // END - if
// Return the password
return $PASS;
case "1": $ret = strtolower(date("d.m.Y - H:i", $time)); break;
case "2": $ret = date("d.m.Y|H:i", $time); break;
case "3": $ret = date("d.m.Y", $time); break;
+ default:
+ DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
+ break;
}
break;
case "1": $ret = date("Y-m-d - g:i A", $time); break;
case "2": $ret = date("y-m-d|H:i", $time); break;
case "3": $ret = date("y-m-d", $time); break;
+ default:
+ DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
+ break;
}
}
return $ret;
}
// Translates the american decimal dot into a german comma
-function TRANSLATE_COMMA ($dotted, $cut=true) {
+function TRANSLATE_COMMA ($dotted, $cut=true, $max=0) {
global $_CONFIG;
// Default is 3 you can change this in admin area "Misc -> Misc Options"
if (empty($_CONFIG['max_comma'])) $_CONFIG['max_comma'] = "3";
+
+ // Use from config is default
$maxComma = $_CONFIG['max_comma'];
+ // Use from parameter?
+ if ($max > 0) $maxComma = $max;
+
// Cut zeros off?
- if ($cut) {
+ if (($cut) && ($max == 0)) {
// Test for commata if in cut-mode
$com = explode(".", $dotted);
- if (count($com) > 1) {
- // Commata found, so only zeros?
- if ($com[1] == str_repeat("0", strlen($com[1]))) {
- // Only zeros, so don't display them
- $maxComma = 0;
- } // END - if
- } else {
+ if (count($com) < 2) {
// Don't display commatas even if there are none... ;-)
$maxComma = 0;
}
} // END - if
// Debug log
- //DEBUG_LOG(__FUNCTION__.":dotted={$dotted},maxComma={$maxComma}");
+ //* DEBUG: */ DEBUG_LOG(__FUNCTION__, __LINE__, "dotted={$dotted},maxComma={$maxComma}");
// Translate it now
switch (GET_LANGUAGE()) {
//
function DEREFERER ($URL) {
- $URL = URL."/modules.php?module=loader&url=".urlencode(base64_encode(gzcompress($URL)));
+ // Don't de-refer our own links!
+ if (substr($URL, 0, strlen(URL)) != URL) {
+ // De-refer this link
+ $URL = URL."/modules.php?module=loader&url=".urlencode(base64_encode(gzcompress($URL)));
+ } // END - if
+
+ // Return link
return $URL;
}
return $ret;
}
//
-function GET_POOL_TYPE($PT) {
- // Unknown pool type is default
- $ret = POOL_UNKNOWN." (".$PT.")";
-
- // Generate constant name
- $constantName = sprintf("POOL_%s", $PT);
-
- // Is the type known?
- if (defined($constantName)) {
- // Prepare eval command
- $eval = sprintf("\$ret = %s;", $constantName);
- eval($eval);
- } // END - if
-
- // Return result
- return $ret;
-}
-//
function FRAMETESTER($URL) {
// Prepare frametester URL
$frametesterUrl = sprintf("%s/modules.php?module=frametester&url=%s",
$ret = ACCOUNT_LOCKED;
break;
+ case "":
+ case null:
+ $ret = ACCOUNT_DELETED;
+ break;
+
default:
+ DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
$ret = UNKNOWN_STATUS_1.$status.UNKNOWN_STATUS_2;
break;
}
set_session("mx_lang", $lang);
}
//
-function LOAD_EMAIL_TEMPLATE($template, $content="", $UID="0") {
+function LOAD_EMAIL_TEMPLATE($template, $content=array(), $UID="0") {
global $DATA, $_CONFIG, $REPLACER;
// Make sure all template names are lowercase!
// Keept for backward-compatiblity (please replace these variables against our new {!CONST!} syntax!)
// No longer used: $MAIN_TITLE = MAIN_TITLE; $URL = URL; $WEBMASTER = WEBMASTER;
- // Init variables (DEPRECATED! Use $content[bla] instead.
- $surname = "";
- $family = "";
- $nick = "";
- $gender = "N";
-
// Prepare IP number and User Agent
- $REMOTE_ADDR = getenv('REMOTE_ADDR');
- $HTTP_USER_AGENT = getenv('HTTP_USER_AGENT');
+ $REMOTE_ADDR = GET_REMOTE_ADDR();
+ $HTTP_USER_AGENT = GET_USER_AGENT();
+ // Default admin
$ADMIN = MAIN_TITLE;
- if (isSessionVariableSet('admin_login')) {
+
+ // Is the admin logged in?
+ if (IS_ADMIN()) {
+ // Get admin id
+ $aid = GET_ADMIN_ID(get_session('admin_login'));
+
// Load Admin data
- $result = SQL_QUERY_ESC("SELECT email FROM "._MYSQL_PREFIX."_admins WHERE login='%s' LIMIT 1",
- array(get_session('admin_login')), __FILE__, __LINE__);
- list($ADMIN) = SQL_FETCHROW($result);
- SQL_FREERESULT($result);
+ $ADMIN = GET_ADMIN_EMAIL($aid);
} // END - if
+ // Neutral email address is default
+ $email = WEBMASTER;
+
// Expiration in a nice output format
if ($_CONFIG['auto_purge'] == 0) {
// Will never expire!
$content['expiration'] = $EXPIRATION;
} // END - if
- // @TODO Try to rewrite this part
- if ($template == "add-points") {
- if (isset($_POST['points'])) {
- $points = bigintval($_POST['points']);
- } else {
- $points = __POINTS_VALUE;
- }
- } // END - if
-
// Load user's data
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):UID={$UID},template={$template}<br />\n";
if ($UID > 0) {
if (EXT_IS_ACTIVE("nickname")) {
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NICKNAME!<br />\n";
// Load nickname
$result = SQL_QUERY_ESC("SELECT surname, family, gender, email, nickname FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1",
array(bigintval($UID)), __FILE__, __LINE__);
- list($surname, $family, $gender, $email, $nick) = SQL_FETCHROW($result);
- SQL_FREERESULT($result);
} else {
- // Load normal data
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NO-NICK!<br />\n";
+ /// Load normal data
$result = SQL_QUERY_ESC("SELECT surname, family, gender, email FROM "._MYSQL_PREFIX."_user_data WHERE userid=%s LIMIT 1",
array(bigintval($UID)), __FILE__, __LINE__);
- list($surname, $family, $gender, $email) = SQL_FETCHROW($result);
- SQL_FREERESULT($result);
}
- } else {
- // Neutral gender and email address is default
- $gender = "N";
- $email = WEBMASTER;
- }
- // Translate M to male or F to female
- $gender = TRANSLATE_GENDER($gender);
+ // Is content an array?
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content[]=".gettype($content)."<br />\n";
+ if (is_array($content)) {
+ // Fetch and migrate data
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - PRE<br />\n";
+ $content = array_merge($content, SQL_FETCHARRAY($result));
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - AFTER<br />\n";
+ } // END - if
- // Insert data if content is an array
- if (is_array($content)) {
- // Please do no longer use direct variable names, use $content[bla]
- // instead.
- $content['gender'] = $gender;
- $content['surname'] = $surname;
- $content['family'] = $family;
- $content['email'] = $email;
- $content['nick'] = $nick;
+ // Free result
+ SQL_FREERESULT($result);
} // END - if
+ // Translate M to male or F to female if present
+ if (isset($content['gender'])) $content['gender'] = TRANSLATE_GENDER($content['gender']);
+
+ // Overwrite email from data if present
+ if (isset($content['email'])) $email = $content['email'];
+
// Store email for some functions in global data array
$DATA['email'] = $email;
$newContent = "";
if (FILE_READABLE($file)) {
// The local file does exists so we load it. :)
- $tmpl_file = @implode("", @file($file));
+ $tmpl_file = implode("", file($file));
$tmpl_file = addslashes($tmpl_file);
// Run code
- $tmpl_file = "\$newContent=\"".COMPILE_CODE($tmpl_file)."\";";
- eval($tmpl_file);
-
- // Replace HTML conform chars
- $newContent = html_entity_decode($newContent);
+ $tmpl_file = "\$newContent=html_entity_decode(\"".COMPILE_CODE($tmpl_file)."\");";
+ @eval($tmpl_file);
} elseif (!empty($template)) {
// Template file not found!
$newContent = TEMPLATE_404.": ".$template."<br />
".TEMPLATE_CONTENT."
-<PRE>".print_r($newContent, true)."</PRE>
+<pre>".print_r($content, true)."</pre>
".TEMPLATE_DATA."
-<PRE>".print_r($DATA, true)."</PRE>
+<pre>".print_r($DATA, true)."</pre>
<br /><br />";
// Debug mode not active? Then remove the HTML tags
// Is there some content?
if (empty($newContent)) {
// Compiling failed
- $newContent = "Compiler error for template {$template}!";
+ $newContent = "Compiler error for template {$template}!\nUncompiled content:\n".$tmpl_file;
+ if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx.";
} // END - if
+ // Remove content and data
+ unset($content);
+ unset($DATA);
+
// Return compiled content
return COMPILE_CODE($newContent);
}
function LOAD_URL($URL, $addUrlData=true) {
global $CSS, $_CONFIG, $footer;
+ // Compile out URI codes
+ $URL = COMPILE_CODE($URL);
+
// Check if http(s):// is there
if ((substr($URL, 0, 7) != "http://") && (substr($URL, 0, 8) != "https://")) {
// Make all URLs full-qualified
$URL = URL."/".$URL;
}
- // Compile out URI codes
- $URL = COMPILE_CODE($URL);
-
// Get output buffer
$OUTPUT = ob_get_contents();
- // Clear it
- ob_end_clean();
+ // Clear it only if there is content
+ if (!empty($OUTPUT)) {
+ ob_end_clean();
+ } // END - if
// Add some data to URL if cookies are not accepted
if (((!defined('__COOKIES')) || (!__COOKIES)) && ($addUrlData)) $URL = ADD_URL_DATA($URL);
// Probe for bot from search engine
- if ((eregi("spider", getenv('HTTP_USER_AGENT'))) || (eregi("bot", getenv('HTTP_USER_AGENT'))) || (eregi("spider", getenv('HTTP_USER_AGENT')))) {
+ if ((eregi("spider", GET_USER_AGENT())) || (eregi("bot", GET_USER_AGENT())) || (eregi("spider", GET_USER_AGENT()))) {
// Search engine bot detected so let's rewrite many chars for the link
$URL = htmlentities(strip_tags($URL), ENT_QUOTES);
//
function COMPILE_CODE($code, $simple = false, $constants = true, $full = true) {
global $SEC_CHARS, $URL_CHARS;
+ // Is the code a string?
+ if (!is_string($code)) {
+ // Silently return it
+ return $code;
+ } // END - if
+
$ARRAY = $SEC_CHARS;
// Select smaller set of chars to replace when we e.g. want to compile URLs
if ($constants) {
// BEFORE 0.2.1 : Language and data constants
// WITH 0.2.1+ : Only language constants
- $code = str_replace('{--', '".', str_replace('--}', '."', $code));
+ $code = str_replace('{--','".', str_replace('--}','."', $code));
// BEFORE 0.2.1 : Not used
// WITH 0.2.1+ : Data constants
- $code = str_replace('{!', '".', str_replace("!}", '."', $code));
- }
+ $code = str_replace('{!','".', str_replace("!}", '."', $code));
+ } // END - if
// Compile QUOT and other non-HTML codes
foreach ($ARRAY['to'] as $k => $to) {
// Do the reversed thing as in inc/libs/security_functions.php
$code = str_replace($to, $ARRAY['from'][$k], $code);
- }
+ } // END - foreach
// But shall I keep simple quotes for later use?
if ($simple) $code = str_replace("\'", '{QUOT}', $code);
// Replace all matches
$matchesFound = array();
foreach ($matches[0] as $key => $match) {
- // Avoid replacing matches multiple times
- if (!isset($matchesFound[$match])) {
- // Not yet replaced!
- $code = str_replace($match, "\".".$match.".\"", $code);
- $matchesFound[$match] = 1;
- } // END - if
+ // Fuzzy look has failed by default
+ $fuzzyFound = false;
+
+ // Fuzzy look on match if already found
+ foreach ($matchesFound as $found => $set) {
+ // Get test part
+ $test = substr($found, 0, strlen($match));
+
+ // Does this entry exist?
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):found={$found},match={$match},set={$set}<br />\n";
+ if ($test == $match) {
+ // Match found!
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):fuzzyFound!<br />\n";
+ $fuzzyFound = true;
+ break;
+ } // END - if
+ } // END - foreach
+
+ // Skip this entry?
+ if ($fuzzyFound) continue;
// Take all string elements
- if ((is_string($matches[4][$key])) && (!isset($matchesFound[$key."_".$matches[4][$key]]))) {
+ if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_".$matches[4][$key]]))) {
// Replace it in the code
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):key={$key},match={$match}<br />\n";
$newMatch = str_replace("[".$matches[4][$key]."]", "['".$matches[4][$key]."']", $match);
- $code = str_replace($match, $newMatch, $code);
+ $code = str_replace($match, "\".".$newMatch.".\"", $code);
$matchesFound[$key."_".$matches[4][$key]] = 1;
- } // END - if
- }
- }
+ $matchesFound[$match] = 1;
+ } elseif (!isset($matchesFound[$match])) {
+ // Not yet replaced!
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):match={$match}<br />\n";
+ $code = str_replace($match, "\".".$match.".\"", $code);
+ $matchesFound[$match] = 1;
+ }
+ } // END - foreach
+ } // END - if
// Return compiled code
return $code;
if (!defined('_MAX')) define('_MAX', 15235);
// Build server string
- $server = $_SERVER['PHP_SELF'].":".getenv('HTTP_USER_AGENT').":".getenv('SERVER_SOFTWARE').":".getenv('REMOTE_ADDR').":".":".filemtime(PATH."inc/databases.php");
+ $server = $_SERVER['PHP_SELF'].":".GET_USER_AGENT().":".getenv('SERVER_SOFTWARE').":".GET_REMOTE_ADDR().":".":".filemtime(PATH."inc/databases.php");
// Build key string
$keys = SITE_KEY.":".DATE_KEY;
// At least 10 numbers shall be secure enought!
$len = $_CONFIG['code_length'];
+ if ($len == 0) $len = $length;
if ($len == 0) $len = 10;
// Cut off requested counts of number
// Has the whole value changed?
if ("".$ret."" != "".$num."") {
// Log the values
- DEBUG_LOG(__FUNCTION__.": num={$num},ret={$ret}");
+ print("<pre>");
+ debug_print_backtrace();
+ die("</pre>");
+ DEBUG_LOG(__FUNCTION__, __LINE__, " num={$num},ret={$ret}");
} // END - if
// Return result
}
// Create selection box or array of splitted timestamp
function CREATE_TIME_SELECTIONS($timestamp, $prefix="", $display="", $align="center", $return_array=false) {
- // Calculate 15-seconds timestamp (15-seconds-steps shall be fine ;) )
- $stamp = round($timestamp / 15) * 15;
+ global $_CONFIG;
+
+ // Calculate 2-seconds timestamp
+ $stamp = round($timestamp);
// Do we have a leap year?
$SWITCH = 0;
$M2 = date("m", (time() + $stamp));
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($M2 > "02")) $SWITCH = ONE_DAY;
+ if ((floor($TEST) == $TEST) && ($M1 == "02") && ($M2 > "02")) $SWITCH = $_CONFIG['one_day'];
// First of all years...
$Y = abs(floor($stamp / (31536000 + $SWITCH)));
// Next months...
$M = abs(floor($stamp / 2628000 - $Y * 12));
// Next weeks
- $W = abs(floor($stamp / 604800 - $Y * ((365 + $SWITCH / ONE_DAY) / 7) - ($M / 12 * (365 + $SWITCH / ONE_DAY) / 7)));
+ $W = abs(floor($stamp / 604800 - $Y * ((365 + $SWITCH / $_CONFIG['one_day']) / 7) - ($M / 12 * (365 + $SWITCH / $_CONFIG['one_day']) / 7)));
// Next days...
- $D = abs(floor($stamp / 86400 - $Y * (365 + $SWITCH / ONE_DAY) - ($M / 12 * (365 + $SWITCH / ONE_DAY)) - $W * 7));
+ $D = abs(floor($stamp / 86400 - $Y * (365 + $SWITCH / $_CONFIG['one_day']) - ($M / 12 * (365 + $SWITCH / $_CONFIG['one_day'])) - $W * 7));
// Next hours...
- $h = abs(floor($stamp / 3600 - $Y * (365 + $SWITCH / ONE_DAY) * 24 - ($M / 12 * (365 + $SWITCH / ONE_DAY) * 24) - $W * 7 * 24 - $D * 24));
+ $h = abs(floor($stamp / 3600 - $Y * (365 + $SWITCH / $_CONFIG['one_day']) * 24 - ($M / 12 * (365 + $SWITCH / $_CONFIG['one_day']) * 24) - $W * 7 * 24 - $D * 24));
// Next minutes..
- $m = abs(floor($stamp / 60 - $Y * (365 + $SWITCH / ONE_DAY) * 24 * 60 - ($M / 12 * (365 + $SWITCH / ONE_DAY) * 24 * 60) - $W * 7 * 24 * 60 - $D * 24 * 60 - $h * 60));
+ $m = abs(floor($stamp / 60 - $Y * (365 + $SWITCH / $_CONFIG['one_day']) * 24 * 60 - ($M / 12 * (365 + $SWITCH / $_CONFIG['one_day']) * 24 * 60) - $W * 7 * 24 * 60 - $D * 24 * 60 - $h * 60));
// And at last seconds...
- $s = abs(floor($stamp - $Y * (365 + $SWITCH / ONE_DAY) * 24 * 3600 - ($M / 12 * (365 + $SWITCH / ONE_DAY) * 24 * 3600) - $W * 7 * 24 * 3600 - $D * 24 * 3600 - $h * 3600 - $m * 60));
+ $s = abs(floor($stamp - $Y * (365 + $SWITCH / $_CONFIG['one_day']) * 24 * 3600 - ($M / 12 * (365 + $SWITCH / $_CONFIG['one_day']) * 24 * 3600) - $W * 7 * 24 * 3600 - $D * 24 * 3600 - $h * 3600 - $m * 60));
// Is seconds zero and time is < 60 seconds?
if (($s == 0) && ($stamp < 60)) {
// Fix seconds
- $s = $timestamp;
+ $s = round($timestamp);
} // END - if
//
}
//
function CREATE_TIMESTAMP_FROM_SELECTIONS($prefix, $POST) {
+ global $_CONFIG;
$ret = 0;
// Do we have a leap year?
$TEST = date('Y', time()) / 4;
$M1 = date("m", time());
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($POST[$prefix."_mo"] > "02")) $SWITCH = ONE_DAY;
+ if ((floor($TEST) == $TEST) && ($M1 == "02") && ($POST[$prefix."_mo"] > "02")) $SWITCH = $_CONFIG['one_day'];
// First add years...
$ret += $POST[$prefix."_ye"] * (31536000 + $SWITCH);
// Next months...
// Load email template
$msg = LOAD_EMAIL_TEMPLATE($template, $content, $UID);
- if (GET_EXT_VERSION("admins") < "0.4.0") {
+ if (EXT_VERSION_IS_OLDER("admins", "0.4.0")) {
// Older version detected!
return SEND_ADMIN_EMAILS($subj, $msg);
- }
+ } // END - if
// Check which admin shall receive this mail
$result = SQL_QUERY_ESC("SELECT DISTINCT admin_id FROM "._MYSQL_PREFIX."_admins_mails WHERE mail_template='%s' ORDER BY admin_id",
} // END - if
} // END - foreach
- // Remove leading commata and space
- $ret = substr($ret, 2);
+ // Do we have something there?
+ if (strlen($ret) > 0) {
+ // Remove leading commata and space
+ $ret = substr($ret, 2);
+ } else {
+ // Zero seconds
+ $ret = "0 "._SECONDS;
+ }
// Return fancy time string
return $ret;
if (ereg("/", $host)) $host = substr($host, 0, strpos($host, "/"));
// Generate relative URL
- //* DEBUG */ print("SCRIPT=".$script."<br />\n");
+ //* DEBUG: */ print("SCRIPT=".$script."<br />\n");
if (substr(strtolower($script), 0, 7) == "http://") {
// But only if http:// is in front!
$script = substr($script, (strlen($url) + 7));
$script = substr($script, (strlen($url) + 8));
}
- //* DEBUG */ print("SCRIPT=".$script."<br />\n");
+ //* DEBUG: */ print("SCRIPT=".$script."<br />\n");
if (substr($script, 0, 1) == "/") $script = substr($script, 1);
// Return host name
// Is postData an array?
if (!is_array($postData)) {
// Abort here
+ DEBUG_LOG(__FUNCTION__, __LINE__, sprintf("postData is not an array. Type: %s", gettype($postData)));
return array("", "", "");
} // END - if
$host = EXTRACT_HOST($script);
// Construct request
- $data = http_build_query($postData, '', '&');
+ $data = http_build_query($postData, '','&');
// Generate POST request header
$request = "POST /" . trim($script) . " HTTP/1.1\r\n";
} // END - if
// Open connection
- //* DEBUG */ die("SCRIPT=".$script."<br />\n");
+ //* DEBUG: */ die("SCRIPT=".$script."<br />\n");
if ($useProxy) {
$fp = @fsockopen(COMPILE_CODE($_CONFIG['proxy_host']), $_CONFIG['proxy_port'], $errno, $errdesc, 30);
} else {
if ((EXT_IS_ACTIVE("admins")) && ($table == "admins")) {
// Create email link for contacting admin in guest area
$EMAIL = ADMINS_CREATE_EMAIL_LINK($email);
- } elseif ((EXT_IS_ACTIVE("user", true)) && (GET_EXT_VERSION("user") >= "0.3.3") && ($table == "user_data")) {
+ } elseif ((EXT_IS_ACTIVE("user")) && (GET_EXT_VERSION("user") >= "0.3.3") && ($table == "user_data")) {
// Create email link for contacting a member within admin area (or later in other areas, too?)
$EMAIL = USER_CREATE_EMAIL_LINK($email);
} elseif ((EXT_IS_ACTIVE("sponsor")) && ($table == "sponsor_data")) {
global $_CONFIG, $_SERVER;
// Is the required extension "sql_patches" there and a salt is not given?
- if (((GET_EXT_VERSION("sql_patches") < "0.3.6") || (GET_EXT_VERSION("sql_patches") == "")) && (empty($salt))) {
- // Extension sql_patches is missing/outdated so we return the plain text
- return $plainText;
+ if (((EXT_VERSION_IS_OLDER("sql_patches", "0.3.6")) || (!EXT_IS_ACTIVE("sql_patches"))) && (empty($salt))) {
+ // Extension sql_patches is missing/outdated so we hash the plain text with MD5
+ return md5($plainText);
} // END - if
// Do we miss an arry element here?
} // END - if
// When the salt is empty build a new one, else use the first x configured characters as the salt
- if ($salt == "") {
+ if (empty($salt)) {
// Build server string
- $server = $_SERVER['PHP_SELF'].":".getenv('HTTP_USER_AGENT').":".getenv('SERVER_SOFTWARE').":".getenv('REMOTE_ADDR').":".":".filemtime(PATH."inc/databases.php");
+ $server = $_SERVER['PHP_SELF'].":".GET_USER_AGENT().":".getenv('SERVER_SOFTWARE').":".GET_REMOTE_ADDR().":".":".filemtime(PATH."inc/databases.php");
// Build key string
$keys = SITE_KEY.":".DATE_KEY.":".$_CONFIG['secret_key'].":".$_CONFIG['file_hash'].":".date("d-m-Y (l-F-T)", bigintval($_CONFIG['patch_ctime'])).":".$_CONFIG['master_salt'];
// Additional data
- $data = $plainText.":".uniqid(rand(), true).":".time();
+ $data = $plainText.":".uniqid(mt_rand(), true).":".time();
// Calculate number for generating the code
$a = time() + _ADD - 1;
// Generate SHA1 sum from modula of number and the prime number
$sha1 = sha1(($a % _PRIME).$server.":".$keys.":".$data.":".date("d-m-Y (l-F-T)", time()).":".$a);
- //* DEBUG: */ echo "SHA1=".$sha1." (".strlen($sha1).")<br>";
+ //* DEBUG: */ echo "SHA1=".$sha1." (".strlen($sha1).")<br />";
$sha1 = scrambleString($sha1);
- //* DEBUG: */ echo "Scrambled=".$sha1." (".strlen($sha1).")<br>";
+ //* DEBUG: */ echo "Scrambled=".$sha1." (".strlen($sha1).")<br />";
//* DEBUG: */ $sha1b = descrambleString($sha1);
- //* DEBUG: */ echo "Descrambled=".$sha1b." (".strlen($sha1b).")<br>";
+ //* DEBUG: */ echo "Descrambled=".$sha1b." (".strlen($sha1b).")<br />";
// Generate the password salt string
$salt = substr($sha1, 0, $_CONFIG['salt_length']);
$scrambleString = implode(":", $scrambleNumbers);
return $scrambleString;
}
-// Append data like session ID referral ID to the given URL which would
+// Append data like session ID or referal ID to the given URL which would
// normally be stored in cookies
function ADD_URL_DATA($URL) {
global $_CONFIG;
}
$mod = substr(round($mod), 0, 4);
$mod = str_repeat('0', 4-strlen($mod)).$mod;
- //* DEBUG: */ echo "*".$start."=".$mod."*<br>";
+ //* DEBUG: */ echo "*".$start."=".$mod."*<br />";
$start += 4;
$newHash .= $mod;
} // END - for
- //* DEBUG: */ print($passHash."<br>".$newHash." (".strlen($newHash).")");
+ //* DEBUG: */ print($passHash."<br />".$newHash." (".strlen($newHash).")");
$ret = generateHash($newHash, $_CONFIG['master_salt']);
//* DEBUG: */ print($ret."<br />\n");
} else {
// Display parsing time and number of SQL queries in footer
function DISPLAY_PARSING_TIME_FOOTER() {
- global $startTime, $_CONFIG;
+ global $_CONFIG;
$endTime = microtime(true);
// Is the timer started?
return session_register($var);
} elseif (!empty($value)) {
// Update session
+ //* DEBUG: */ echo "UPDATE:".$var."=".$value."<br />\n";
$_SESSION[$var] = $value;
- } else {
- // Something bad happens!
- return false; // Hope this doesn't make so much trouble???
+ return true;
}
- // Return always true if the session variable is already set.
- // Keept me busy for a longer while...
+ // Ignored (but valid)
//* DEBUG: */ echo "IGNORED:".$var."=".$value."<br />\n";
return true;
}
// Check wether a boolean constant is set
// Taken from user comments in PHP documentation for function constant()
-function isBooleanConstantAndTrue($constname) { // : Boolean
+function isBooleanConstantAndTrue($constName) { // : Boolean
+ global $constCache;
+
+ // Failed by default
$res = false;
- if (defined($constname)) $res = (constant($constname) === true);
- return($res);
+
+ // In cache?
+ if (isset($constCache[$constName])) {
+ // Use cache
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): ".$constName."-CACHE!<br />\n";
+ $res = $constCache[$constName];
+ } else {
+ // Check constant
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): ".$constName."-RESOLVE!<br />\n";
+ if (defined($constName)) $res = (constant($constName) === true);
+
+ // Set cache
+ $constCache[$constName] = $res;
+ }
+ //* DEBUG: */ var_dump($res);
+
+ // Return value
+ return $res;
}
// Check wether a session variable is set
function isSessionVariableSet($var) {
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):var={$var}<br />\n";
return (isset($_SESSION[$var]));
}
// Returns wether the value of the session variable or NULL if not set
function get_session($var) {
+ global $cacheArray;
+
// Default is not found! ;-)
$value = null;
- // Is the variable there?
- if (isSessionVariableSet($var)) {
+ // Is the variable there or cached values?
+ if (isset($cacheArray['session'][$var])) {
+ // Get cached value (skips a lot SQL_ESCAPE() calles!
+ $value = $cacheArray['session'][$var];
+ } elseif (isSessionVariableSet($var)) {
// Then get it secured!
$value = SQL_ESCAPE($_SESSION[$var]);
+
+ // Cache the value
+ $cacheArray['session'][$var] = $value;
} // END - if
// Return the value
return $value;
}
// Send notification to admin
-function SEND_ADMIN_NOTIFICATION($subject, $templateName, $content="", $uid="0") {
+function SEND_ADMIN_NOTIFICATION($subject, $templateName, $content=array(), $uid="0") {
if (GET_EXT_VERSION("admins") >= "0.4.1") {
// Send new way
SEND_ADMIN_EMAILS_PRO($subject, $templateName, $content, $uid);
die("</pre>");
}
// Debug message logger
-function DEBUG_LOG ($message) {
+function DEBUG_LOG ($file, $line, $message, $force=true) {
// Is debug mode enabled?
- if (isBooleanConstantAndTrue('DEBUG_MODE')) {
+ if ((isBooleanConstantAndTrue('DEBUG_MODE')) || ($force)) {
// Log this message away
$fp = fopen(PATH."inc/cache/debug.log", 'a') or mxchange_die("Cannot write logfile debug.log!");
- fwrite($fp, date("d.m.Y|H:i:s", time())."|{$message}\n");
+ fwrite($fp, date("d.m.Y|H:i:s", time())."|".basename(__FILE__)."|".__LINE__."|".strip_tags($message)."\n");
fclose($fp);
} // END - if
}
$file = $baseDir.$baseFile;
// Is this a valid reset file?
- if ((is_file($file)) && (is_readable($file)) && (substr($baseFile, 0, strlen($prefix)) == $prefix) && (substr($baseFile, -4, 4) == ".php")) {
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):baseDir={$baseDir},prefix={$prefix},baseFile={$baseFile}<br />\n";
+ if ((FILE_READABLE($file)) && (substr($baseFile, 0, strlen($prefix)) == $prefix) && (substr($baseFile, -4, 4) == ".php")) {
// Remove both for extension name
$extName = substr($baseFile, strlen($prefix), -4);
if (($extId > 0) && (EXT_IS_ACTIVE($extName))) {
// Then add this file
$INCs[] = $file;
+ } elseif ($extId == 0) {
+ // Add non-extension files as well
+ $INCs[] = $file;
}
} // END - if
} // END - while
// Close directory
closedir($dirPointer);
+ // Sort array
+ asort($INCs);
+
// Return array with include files
return $INCs;
}
global $_CONFIG;
// Is the reset set or old sql_patches?
- if ((!isBooleanConstantAndTrue('__DAILY_RESET')) || (GET_EXT_VERSION("sql_patches") < "0.4.5")) {
+ if ((!defined('__DAILY_RESET')) || (EXT_VERSION_IS_OLDER("sql_patches", "0.4.5"))) {
// Then abort here
- return;
+ return array();
} // END - if
// Get more daily reset scripts
$INC_POOL = GET_DIR_AS_ARRAY(PATH."inc/reset/", "reset_");
+ // Update database
+ if (!defined('DEBUG_RESET')) UPDATE_CONFIG("last_update", time());
+
// Create current week mark
$currWeek = date("W", time());
$INC_POOL = array_merge($INC_POOL, GET_DIR_AS_ARRAY(PATH."inc/weekly/", "weekly_"));
// Update config
- UPDATE_CONFIG("last_week", $currWeek);
+ if (!defined('DEBUG_WEEKLY')) UPDATE_CONFIG("last_week", $currWeek);
} // END - if
// Create current month mark
$INC_POOL = array_merge($INC_POOL, GET_DIR_AS_ARRAY(PATH."inc/monthly/", "monthly_"));
// Update config
- UPDATE_CONFIG("last_month", $currMonth);
+ if (!defined('DEBUG_MONTHLY')) UPDATE_CONFIG("last_month", $currMonth);
} // END - if
// Return array
// Converts timestamp selections into a timestamp
function CONVERT_SELECTIONS_TO_TIMESTAMP(&$POST, &$DATA, &$id, &$skip) {
// Init test variable
- $TEST2 = "";
+ $test2 = "";
// Get last three chars
- $TEST = substr($id, -3);
+ $test = substr($id, -3);
// Improved way of checking! :-)
- if (in_array($TEST, array("_ye", "_mo", "_we", "_da", "_ho", "_mi", "_se"))) {
+ if (in_array($test, array("_ye", "_mo", "_we", "_da", "_ho", "_mi", "_se"))) {
// Found a multi-selection for timings?
- $TEST = substr($id, 0, -3);
- if ((isset($POST[$TEST."_ye"])) && (isset($POST[$TEST."_mo"])) && (isset($POST[$TEST."_we"])) && (isset($POST[$TEST."_da"])) && (isset($POST[$TEST."_ho"])) && (isset($POST[$TEST."_mi"])) && (isset($POST[$TEST."_se"])) && ($TEST != $TEST2)) {
+ $test = substr($id, 0, -3);
+ if ((isset($POST[$test."_ye"])) && (isset($POST[$test."_mo"])) && (isset($POST[$test."_we"])) && (isset($POST[$test."_da"])) && (isset($POST[$test."_ho"])) && (isset($POST[$test."_mi"])) && (isset($POST[$test."_se"])) && ($test != $test2)) {
// Generate timestamp
- $POST[$TEST] = CREATE_TIMESTAMP_FROM_SELECTIONS($TEST, $POST);
- $DATA[] = "$TEST='".$POST[$TEST]."'";
+ $POST[$test] = CREATE_TIMESTAMP_FROM_SELECTIONS($test, $POST);
+ $DATA[] = sprintf("%s='%s'", $test, $POST[$test]);
// Remove data from array
foreach (array("ye", "mo", "we", "da", "ho", "mi", "se") as $rem) {
- unset($POST[$TEST."_".$rem]);
+ unset($POST[$test."_".$rem]);
} // END - foreach
// Skip adding
- unset($id); $skip = true; $TEST2 = $TEST;
+ unset($id); $skip = true; $test2 = $test;
} // END - if
} else {
// Process this entry
- $skip = false; $TEST2 = "";
+ $skip = false; $test2 = "";
}
}
// Reverts the german decimal comma into Computer decimal dot
function REVERT_COMMA ($str) {
- $float = (float)str_replace(",", ".", $str);
+ // Default float is not a float... ;-)
+ $float = false;
+
+ // Which language is selected?
+ switch (GET_LANGUAGE()) {
+ case "de": // German language
+ // Remove german thousand dots first
+ $str = str_replace(".", "", $str);
+
+ // Replace german commata with decimal dot and cast it
+ $float = (float)str_replace(",", ".", $str);
+ break;
+
+ default: // US and so on
+ // Remove thousand dots first and cast
+ $float = (float)str_replace(",", "", $str);
+ break;
+ }
+
+ // Return float
return $float;
}
-//
+// Handle menu-depending failed logins and return the rendered content
+function HANDLE_LOGIN_FAILTURES ($accessLevel) {
+ // Default output is empty ;-)
+ $OUT = "";
+
+ // Is the session data set?
+ if ((isSessionVariableSet('mxchange_'.$accessLevel.'_failtures')) && (isSessionVariableSet('mxchange_'.$accessLevel.'_last_fail'))) {
+ // Ignore zero values
+ if (get_session('mxchange_'.$accessLevel.'_failtures') > 0) {
+ // Non-guest has login failtures found, get both data and prepare it for template
+ //* DEBUG: */ print __FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):accessLevel={$accessLevel}<br />\n";
+ $content = array(
+ 'login_failtures' => get_session('mxchange_'.$accessLevel.'_failtures'),
+ 'last_failture' => MAKE_DATETIME(get_session('mxchange_'.$accessLevel.'_last_fail'), "2")
+ );
+
+ // Load template
+ $OUT = LOAD_TEMPLATE("login_failtures", true, $content);
+ } // END - if
+
+ // Reset session data
+ set_session('mxchange_'.$accessLevel.'_failtures', "");
+ set_session('mxchange_'.$accessLevel.'_last_fail', "");
+ } // END - if
+
+ // Return rendered content
+ return $OUT;
+}
+// Rebuild cache
+function REBUILD_CACHE ($cache, $inc="") {
+ global $cacheInstance, $_CONFIG, $CSS;
+
+ // Shall I remove the cache file?
+ if ((EXT_IS_ACTIVE("cache")) && (is_object($cacheInstance))) {
+ // Rebuild cache
+ if ($cacheInstance->cache_file($cache, true)) {
+ // Destroy it
+ $cacheInstance->cache_destroy();
+ } // END - if
+
+ // Include file given?
+ if (!empty($inc)) {
+ // Construct FQFN
+ $fqfn = sprintf("%sinc/loader/load_cache-%s.php", PATH, $inc);
+
+ // Is the include there?
+ if (FILE_READABLE($fqfn)) {
+ // And rebuild it from scratch
+ require($fqfn);
+ } else {
+ // Include not found!
+ DEBUG_LOG(__FUNCTION__, __LINE__, "Include {$inc} not found. cache={$cache}");
+ }
+ } // END - if
+ } // END - if
+}
+// Purge admin menu cache
+function CACHE_PURGE_ADMIN_MENU ($id=0, $action="", $what="", $str="") {
+ global $_CONFIG, $cacheInstance;
+
+ // Is the cache extension enabled or no cache instance or admin menu cache disabled?
+ if (!EXT_IS_ACTIVE("cache")) {
+ // Cache extension not active
+ return false;
+ } elseif (!is_object($cacheInstance)) {
+ // No cache instance!
+ DEBUG_LOG(__FUNCTION__, __LINE__, " No cache instance found.");
+ return false;
+ } elseif ((!isset($_CONFIG['cache_admin_menu'])) || ($_CONFIG['cache_admin_menu'] == "N")) {
+ // Caching disabled (currently experiemental!)
+ return false;
+ }
+
+ // Experiemental feature!
+ trigger_error("You have to delete the admin_*.cache files by yourself at this point.");
+}
+// Translates the "pool type" into human-readable
+function TRANSLATE_POOL_TYPE ($type) {
+ // Default type is unknown
+ $translated = sprintf(POOL_TYPE_UNKNOWN, $type);
+
+ // Generate constant
+ $constName = sprintf("POOL_TYPE_%s", $type);
+
+ // Does it exist?
+ if (defined($constName)) {
+ // Then use it
+ $translated = constant($constName);
+ } // END - if
+
+ // Return "translation"
+ return $translated;
+}
+// "Getter" for remote IP number
+function GET_REMOTE_ADDR () {
+ // Get remote ip from environment
+ $remoteAddr = getenv('REMOTE_ADDR');
+
+ // Is removeip installed?
+ if (EXT_IS_ACTIVE("removeip")) {
+ // Then anonymize it
+ $remoteAddr = GET_ANONYMOUS_REMOTE_ADDR($remoteAddr);
+ } // END - if
+
+ // Return it
+ return $remoteAddr;
+}
+// "Getter" for remote hostname
+function GET_REMOTE_HOST () {
+ // Get remote ip from environment
+ $remoteHost = getenv('REMOTE_HOST');
+
+ // Is removeip installed?
+ if (EXT_IS_ACTIVE("removeip")) {
+ // Then anonymize it
+ $remoteHost = GET_ANONYMOUS_REMOTE_HOST($remoteHost);
+ } // END - if
+
+ // Return it
+ return $remoteHost;
+}
+// "Getter" for user agent
+function GET_USER_AGENT () {
+ // Get remote ip from environment
+ $userAgent = getenv('HTTP_USER_AGENT');
+
+ // Is removeip installed?
+ if (EXT_IS_ACTIVE("removeip")) {
+ // Then anonymize it
+ $userAgent = GET_ANONYMOUS_USER_AGENT($userAgent);
+ } // END - if
+
+ // Return it
+ return $userAgent;
+}
+// "Getter" for referer
+function GET_REFERER () {
+ // Get remote ip from environment
+ $referer = getenv('HTTP_REFERER');
+
+ // Is removeip installed?
+ if (EXT_IS_ACTIVE("removeip")) {
+ // Then anonymize it
+ $referer = GET_ANONYMOUS_REFERER($referer);
+ } // END - if
+
+ // Return it
+ return $referer;
+}
+
+// Adds a bonus mail to the queue
+// This is a high-level function!
+function ADD_NEW_BONUS_MAIL ($data, $mode="", $output=true) {
+ // Use mode from data if not set and availble ;-)
+ if ((empty($mode)) && (isset($data['mode']))) $mode = $data['mode'];
+
+ // Generate receiver list
+ $RECEIVER = GENERATE_RECEIVER_LIST($data['cat'], $data['receiver'], $mode);
+
+ // Receivers added?
+ if (!empty($RECEIVER)) {
+ // Add bonus mail to queue
+ ADD_BONUS_MAIL_TO_QUEUE(
+ $data['subject'],
+ $data['text'],
+ $RECEIVER,
+ $data['points'],
+ $data['seconds'],
+ $data['url'],
+ $data['cat'],
+ $mode,
+ $data['receiver']
+ );
+
+ // Mail inserted into bonus pool
+ if ($output) LOAD_TEMPLATE("admin_settings_saved", false, ADMIN_BONUS_SEND);
+ } elseif ($output) {
+ // More entered than can be reached!
+ LOAD_TEMPLATE("admin_settings_saved", false, ADMIN_MORE_SELECTED);
+ } else {
+ // Debug log
+ DEBUG_LOG(__FUNCTION__, __LINE__, " cat={$data['cat']},receiver={$data['receiver']},data=".base64_encode(serialize($data))." More selected, than available!");
+ }
+}
+// Determines referal id and sets it
+function DETERMINE_REFID () {
+ global $_CONFIG, $CLICK, $_SERVER;
+
+ // Check if refid is set
+ if ((!empty($_GET['user'])) && ($CLICK == 1) && (basename($_SERVER['PHP_SELF']) == "click.php")) {
+ // The variable user comes from the click-counter script click.php and we only accept this here
+ $GLOBALS['refid'] = bigintval($_GET['user']);
+ } elseif (!empty($_POST['refid'])) {
+ // Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
+ $GLOBALS['refid'] = SQL_ESCAPE(strip_tags($_POST['refid']));
+ } elseif (!empty($_GET['refid'])) {
+ // Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
+ $GLOBALS['refid'] = SQL_ESCAPE(strip_tags($_GET['refid']));
+ } elseif (!empty($_GET['ref'])) {
+ // Set refid=ref (the referal link uses such variable)
+ $GLOBALS['refid'] = SQL_ESCAPE(strip_tags($_GET['ref']));
+ } elseif ((isSessionVariableSet('refid')) && (get_session('refid') != 0)) {
+ // Set session refid als global
+ $GLOBALS['refid'] = bigintval(get_session('refid'));
+ } elseif ((GET_EXT_VERSION("sql_patches") != "") && ($_CONFIG['def_refid'] > 0)) {
+ // Set default refid as refid in URL
+ $GLOBALS['refid'] = bigintval($_CONFIG['def_refid']);
+ } elseif ((GET_EXT_VERSION("user") >= "0.3.4") && ($_CONFIG['select_user_zero_refid']) == "Y") {
+ // Select a random user which has confirmed enougth mails
+ $GLOBALS['refid'] = SELECT_RANDOM_REFID();
+ } else {
+ // No default ID when sql_patches is not installed or none set
+ $GLOBALS['refid'] = 0;
+ }
+
+ // Set cookie when default refid > 0
+ if (!isSessionVariableSet('refid') || (!empty($GLOBALS['refid'])) || ((get_session('refid') == "0") && (isset($_CONFIG['def_refid'])) && ($_CONFIG['def_refid'] > 0))) {
+ // Set cookie
+ set_session('refid', $GLOBALS['refid']);
+ } // END - if
+}
+
+// Destroys the admin session
+function DESTROY_ADMIN_SESSION () {
+ // Kill maybe existing session variables including array elements
+ set_session('admin_login' , "");
+ set_session('admin_md5' , "");
+ set_session('admin_last' , "");
+ set_session('admin_to' , "");
+
+ // Destroy session and return status
+ return @session_destroy();
+}
+
+// Checks if a given apache module is loaded
+function IF_APACHE_MODULE_LOADED ($apacheModule) {
+ // Check it and return result
+ return (((function_exists('apache_get_modules')) && (in_array($apacheModule, apache_get_modules()))) || (!function_exists('apache_get_modules')));
+}
+
//////////////////////////////////////////////////
// //
// AUTOMATICALLY RE-GENERATED MISSING FUNCTIONS //
projects / mailer.git / blobdiff