<?php
/************************************************************************
- * MXChange v0.2.1 Start: 08/25/2003 *
- * =============== Last change: 11/29/2005 *
+ * Mailer v0.2.1-FINAL Start: 08/25/2003 *
+ * =================== Last change: 11/29/2005 *
* *
* -------------------------------------------------------------------- *
* File : functions.php *
* svn:keywords Date Revision" (autoprobset!) at least!!!!!! *
* -------------------------------------------------------------------- *
* Copyright (c) 2003 - 2009 by Roland Haeder *
+ * Copyright (c) 2009, 2010 by Mailer Developer Team *
* For more information visit: http://www.mxchange.org *
* *
* This program is free software; you can redistribute it and/or modify *
// Output HTML code directly or 'render' it. You addionally switch the new-line character off
function outputHtml ($htmlCode, $newLine = true) {
- // Transfer username
- $username = getUsername();
+ // Init output
+ if (!isset($GLOBALS['output'])) {
+ $GLOBALS['output'] = '';
+ } // END - if
// Do we have HTML-Code here?
if (!empty($htmlCode)) {
// The same as above... ^
outputRawCode($htmlCode);
- if ($newLine) print("\n");
+ if ($newLine === true) print("\n");
break;
default:
// Huh, something goes wrong or maybe you have edited config.php ???
- app_die(__FUNCTION__, __LINE__, '<strong>{--FATAL_ERROR--}:</strong> {--LANG_NO_RENDER_DIRECT--}');
+ debug_report_bug(__FUNCTION__, __LINE__, '<strong>{--FATAL_ERROR--}:</strong> {--LANG_NO_RENDER_DIRECT--}');
break;
} // END - switch
- } elseif ((getPhpCaching() == 'on') && (isset($GLOBALS['footer_sent'])) && ($GLOBALS['footer_sent'] == 1)) {
- // Headers already sent?
- if (headers_sent()) {
- // Log this error
- logDebugMessage(__FUNCTION__, __LINE__, 'Headers already sent! We need debug backtrace here.');
-
- // Trigger an user error
- debug_report_bug('Headers are already sent!');
- } // END - if
-
+ } elseif ((getPhpCaching() == 'on') && ((!isset($GLOBALS['header'])) || (count($GLOBALS['header']) == 0))) {
// Output cached HTML code
$GLOBALS['output'] = ob_get_contents();
clearOutputBuffer();
} // END - if
- // Send HTTP header
- sendHeader('HTTP/1.1 200');
-
- // Used later
- $now = gmdate('D, d M Y H:i:s') . ' GMT';
-
- // General headers for no caching
- sendHeader('Expired: ' . $now); // RFC2616 - Section 14.21
- sendHeader('Last-Modified: ' . $now);
- sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
- sendHeader('Pragma: no-cache'); // HTTP/1.0
- sendHeader('Connection: Close');
- sendHeader('Content-Type: ' . getContentType() . '; charset=UTF-8');
- sendHeader('Content-language: ' . getLanguage());
-
- // Extension 'rewrite' installed?
- if ((isExtensionActive('rewrite')) && (getOutputMode() != '1')) {
- $GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
- } // END - if
+ // Send all HTTP headers
+ sendHttpHeaders();
// Compile and run finished rendered HTML code
- while ((strpos($GLOBALS['output'], '{!') > 0) || (strpos($GLOBALS['output'], '{?') > 0)) {
- // Prepare the content and eval() it...
- $content = array();
- $newContent = '';
-
- // Compile it
- $eval = "\$newContent = \"".compileCode(smartAddSlashes($GLOBALS['output']))."\";";
- eval($eval);
-
- // Was that eval okay?
- if (empty($newContent)) {
- // Something went wrong!
- debug_report_bug('Evaluation error:<pre>' . htmlentities($eval) . '</pre>');
- } // END - if
- $GLOBALS['output'] = $newContent;
- } // END - while
+ compileFinalOutput();
// Output code here, DO NOT REMOVE! ;-)
outputRawCode($GLOBALS['output']);
} elseif ((getConfig('OUTPUT_MODE') == 'render') && (!empty($GLOBALS['output']))) {
- // Rewrite links when rewrite extension is active
- if ((isExtensionActive('rewrite')) && (getOutputMode() != '1')) {
- $GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
- } // END - if
+ // Send all HTTP headers
+ sendHttpHeaders();
// Compile and run finished rendered HTML code
- while (strpos($GLOBALS['output'], '{!') > 0) {
- eval("\$GLOBALS['output'] = \"".compileCode(smartAddSlashes($GLOBALS['output']))."\";");
- } // END - while
+ compileFinalOutput();
// Output code here, DO NOT REMOVE! ;-)
outputRawCode($GLOBALS['output']);
+ } else {
+ // And flush all headers
+ flushHeaders();
+ }
+}
+
+// Sends out all headers required for HTTP/1.1 reply
+function sendHttpHeaders () {
+ // Used later
+ $now = gmdate('D, d M Y H:i:s') . ' GMT';
+
+ // Send HTTP header
+ sendHeader('HTTP/1.1 ' . getHttpStatus());
+
+ // General headers for no caching
+ sendHeader('Expires: ' . $now); // RFC2616 - Section 14.21
+ sendHeader('Last-Modified: ' . $now);
+ sendHeader('Cache-Control: no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0'); // HTTP/1.1
+ sendHeader('Pragma: no-cache'); // HTTP/1.0
+ sendHeader('Connection: Close');
+ sendHeader('Content-Type: ' . getContentType() . '; charset=UTF-8');
+ sendHeader('Content-Language: ' . getLanguage());
+}
+
+// Compiles the final output
+function compileFinalOutput () {
+ // Add page header and footer
+ addPageHeaderFooter();
+
+ // Do the final compilation
+ $GLOBALS['output'] = doFinalCompilation($GLOBALS['output']);
+
+ // Extension 'rewrite' installed?
+ if ((isExtensionActive('rewrite')) && (getOutputMode() != 1)) {
+ $GLOBALS['output'] = rewriteLinksInCode($GLOBALS['output']);
+ } // END - if
+
+ // Compress it?
+ if (!empty($_SERVER['HTTP_ACCEPT_ENCODING']) && (strpos('gzip', $_SERVER['HTTP_ACCEPT_ENCODING']) !== null)) {
+ // Compress it for HTTP gzip
+ $GLOBALS['output'] = gzencode($GLOBALS['output'], 9, true);
+
+ // Add header
+ sendHeader('Content-Encoding: gzip');
+ } elseif (!empty($_SERVER['HTTP_ACCEPT_ENCODING']) && (strpos('deflate', $_SERVER['HTTP_ACCEPT_ENCODING']) !== null)) {
+ // Compress it for HTTP deflate
+ $GLOBALS['output'] = gzcompress($GLOBALS['output'], 9);
+
+ // Add header
+ sendHeader('Content-Encoding: deflate');
}
+
+ // Add final length
+ sendHeader('Content-Length: ' . strlen($GLOBALS['output']));
+
+ // Flush all headers
+ flushHeaders();
+}
+
+// Main compilation loop
+function doFinalCompilation ($code, $insertComments = true) {
+ // Insert comments? (Only valid with HTML templates, of course)
+ enableTemplateHtml($insertComments);
+
+ // Init counter
+ $cnt = 0;
+
+ // Compile all out
+ while (((strpos($code, '{--') !== false) || (strpos($code, '{DQUOTE}') !== false) || (strpos($code, '{?') !== false) || (strpos($code, '{%') !== false)) && ($cnt < 3)) {
+ // Init common variables
+ $content = array();
+ $newContent = '';
+
+ // Compile it
+ //* DEBUG: */ debugOutput('<pre>'.htmlentities($code).'</pre>');
+ $eval = '$newContent = "' . str_replace('{DQUOTE}', '"', compileCode(escapeQuotes($code))) . '";';
+ //* DEBUG: */ if ($insertComments) die('<pre>'.linenumberCode($eval).'</pre>');
+ eval($eval);
+ //* DEBUG: */ die('<pre>'.htmlentities($newContent).'</pre>');
+
+ // Was that eval okay?
+ if (empty($newContent)) {
+ // Something went wrong!
+ debug_report_bug(__FUNCTION__, __LINE__, 'Evaluation error:<pre>' . linenumberCode($eval) . '</pre>', false);
+ } // END - if
+
+ // Use it again
+ $code = $newContent;
+
+ // Count round
+ $cnt++;
+ } // END - while
+
+ // Return the compiled code
+ return $code;
}
// Output the raw HTML code
function outputRawCode ($htmlCode) {
// Output stripped HTML code to avoid broken JavaScript code, etc.
- print(stripslashes(stripslashes($htmlCode)));
+ print(str_replace('{BACK}', "\\", $htmlCode));
// Flush the output if only getPhpCaching() is not 'on'
if (getPhpCaching() != 'on') {
}
// Add a fatal error message to the queue array
-function addFatalMessage ($F, $L, $message, $extra='') {
+function addFatalMessage ($F, $L, $message, $extra = '') {
if (is_array($extra)) {
// Multiple extras for a message with masks
$message = call_user_func_array('sprintf', $extra);
$GLOBALS['fatal_messages'][] = $message;
// Log fatal messages away
- logDebugMessage($F, $L, " message={$message}");
+ logDebugMessage($F, $L, 'Fatal error message: ' . $message);
}
// Getter for total fatal message count
function getTotalFatalErrors () {
// Init coun
- $count = 0;
+ $count = '0';
// Do we have at least the first entry?
if (!empty($GLOBALS['fatal_messages'][0])) {
}
// Load a template file and return it's content (only it's name; do not use ' or ")
-function loadTemplate ($template, $return=false, $content=array()) {
+function loadTemplate ($template, $return = false, $content = array()) {
// @TODO Remove this sanity-check if all is fine
- if (!is_bool($return)) debug_report_bug('return is not bool (' . gettype($return) . ')');
+ if (!is_bool($return)) debug_report_bug(__FUNCTION__, __LINE__, 'return is not bool (' . gettype($return) . ')');
// @TODO Try to rewrite all $DATA to $content
global $DATA;
// Do we have cache?
- if (!isset($GLOBALS['template_eval'][$template])) {
- // Add more variables which you want to use in your template files
- $username = getUsername();
-
+ if (isTemplateCached($template)) {
+ // Evaluate the cache
+ eval(readTemplateCache($template));
+ } elseif (!isset($GLOBALS['template_eval'][$template])) {
// Make all template names lowercase
$template = strtolower($template);
- // Count the template load
- incrementConfigEntry('num_templates');
-
// Init some data
$ret = '';
- if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = 0;
-
- // Generate date/time string
- $date_time = generateDateTime(time(), '1');
-
- // Is content an array
- if (is_array($content)) $content['date_time'] = $date_time;
-
- // @DEPRECATED Try to rewrite the if() condition
- if ($template == 'member_support_form') {
- // Support request of a member
- $result = SQL_QUERY_ESC("SELECT `userid`, `gender`, `surname`, `family`, `email` FROM `{?_MYSQL_PREFIX?}_user_data` WHERE `userid`=%s LIMIT 1",
- array(getUserId()), __FUNCTION__, __LINE__);
-
- // Is content an array?
- if (is_array($content)) {
- // Merge data
- $content = merge_array($content, SQL_FETCHARRAY($result));
-
- // Translate gender
- $content['gender'] = translateGender($content['gender']);
- } else {
- // @DEPRECATED
- // @TODO Find all templates which are using these direct variables and rewrite them.
- // @TODO After this step is done, this else-block is history
- list($gender, $surname, $family, $email) = SQL_FETCHROW($result);
-
- // Translate gender
- $gender = translateGender($gender);
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("DEPRECATION-WARNING: content is not array [%s], template=%s.", gettype($content), $template));
- }
-
- // Free result
- SQL_FREERESULT($result);
- } // END - if
+ if (empty($GLOBALS['refid'])) $GLOBALS['refid'] = '0';
// Base directory
$basePath = sprintf("%stemplates/%s/html/", getConfig('PATH'), getLanguage());
- $mode = '';
-
- // Check for admin/guest/member templates
- if (substr($template, 0, 6) == 'admin_') {
- // Admin template found
- $mode = 'admin/';
- } elseif (substr($template, 0, 6) == 'guest_') {
- // Guest template found
- $mode = 'guest/';
- } elseif (substr($template, 0, 7) == 'member_') {
- // Member template found
- $mode = 'member/';
- } elseif (substr($template, 0, 8) == 'install_') {
- // Installation template found
- $mode = 'install/';
- } elseif (substr($template, 0, 4) == 'ext_') {
- // Extension template found
- $mode = 'ext/';
- } elseif (substr($template, 0, 3) == 'la_') {
- // 'Logical-area' template found
- $mode = 'la/';
- } elseif (substr($template, 0, 3) == 'js_') {
- // JavaScript template found
- $mode = 'js/';
- } elseif (substr($template, 0, 5) == 'menu_') {
- // Menu template found
- $mode = 'menu/';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
-
- // Probe for valid extension name
- if (isExtensionNameValid($test)) {
- // Set extra path to extension's name
- $mode = $test . '/';
- } // END - if
- }
+ $extraPath = detectExtraTemplatePath($template);;
////////////////////////
// Generate file name //
////////////////////////
- $FQFN = $basePath . $mode . $template . '.tpl';
-
- if ((isWhatSet()) && ((strpos($template, '_header') > 0) || (strpos($template, '_footer') > 0)) && (($mode == 'guest/') || ($mode == 'member/') || ($mode == 'admin/'))) {
- // Select what depended header/footer template file for admin/guest/member area
- $file2 = sprintf("%s%s%s_%s.tpl",
- $basePath,
- $mode,
- $template,
- getWhat()
- );
-
- // Probe for it...
- if (isFileReadable($file2)) $FQFN = $file2;
-
- // Remove variable from memory
- unset($file2);
- } // END - if
+ $FQFN = $basePath . $extraPath . $template . '.tpl';
// Does the special template exists?
if (!isFileReadable($FQFN)) {
// Now does the final template exists?
if (isFileReadable($FQFN)) {
+ // Count the template load
+ incrementConfigEntry('num_templates');
+
// The local file does exists so we load it. :)
$GLOBALS['tpl_content'] = readFromFile($FQFN);
- // Replace ' to our own chars to preventing them being quoted
- while (strpos($GLOBALS['tpl_content'], "'") !== false) { $GLOBALS['tpl_content'] = str_replace("'", '{QUOT}', $GLOBALS['tpl_content']); }
-
// Do we have to compile the code?
$ret = '';
- if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{!') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false)) {
+ if ((strpos($GLOBALS['tpl_content'], '$') !== false) || (strpos($GLOBALS['tpl_content'], '{--') !== false) || (strpos($GLOBALS['tpl_content'], '{?') !== false) || (strpos($GLOBALS['tpl_content'], '{%') !== false)) {
// Normal HTML output?
- if ($GLOBALS['output_mode'] == 0) {
+ if (getOutputMode() == '0') {
// Add surrounding HTML comments to help finding bugs faster
- $ret = "<!-- Template " . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . "<!-- Template " . $template . " - End -->\n";
+ $ret = '<!-- Template ' . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . '<!-- Template ' . $template . " - End -->\n";
// Prepare eval() command
- $eval = '$ret = "' . compileCode(smartAddSlashes($GLOBALS['tpl_content'])) . '";';
+ $eval = '$ret = "' . compileCode(escapeQuotes($ret)) . '";';
+ } elseif (substr($template, 0, 3) == 'js_') {
+ // JavaScripts don't like entities and timings
+ $eval = '$ret = decodeEntities("' . compileRawCode(escapeJavaScriptQuotes($GLOBALS['tpl_content'])) . '");';
} else {
- // Prepare eval() command
- $eval = '$ret = "' . compileCode(smartAddSlashes($GLOBALS['tpl_content'])) . '";';
+ // Prepare eval() command, other output doesn't like entities, maybe
+ $eval = '$ret = decodeEntities("' . compileRawCode(escapeQuotes($GLOBALS['tpl_content'])) . '");';
}
} else {
- // Simply return loaded code
- $eval = '$ret = $GLOBALS[\'tpl_content\'];';
+ // Add surrounding HTML comments to help finding bugs faster
+ $ret = '<!-- Template ' . $template . " - Start -->\n" . $GLOBALS['tpl_content'] . '<!-- Template ' . $template . " - End -->\n";
+ $eval = '$ret = "' . compileRawCode(escapeQuotes($ret)) . '";';
} // END - if
// Cache the eval() command here
$GLOBALS['template_eval'][$template] = $eval;
-
- // Eval the code
- eval($GLOBALS['template_eval'][$template]);
+ } elseif ((isAdmin()) || ((isInstalling()) && (!isInstalled()))) {
+ // Only admins shall see this warning or when installation mode is active
+ $ret = '<div class="para">
+ <span class="guest_failed">{--TEMPLATE_404--}</span>
+</div>
+<div class="para">
+ (' . $template . ')
+</div>
+<div class="para">
+ {--TEMPLATE_CONTENT--}
+ <pre>' . print_r($content, true) . '</pre>
+ {--TEMPLATE_DATA--}
+ <pre>' . print_r($DATA, true) . '</pre>
+</div>';
} else {
// No file!
$GLOBALS['template_eval'][$template] = '404';
}
- } elseif (((isAdmin()) || ((isInstalling()) && (!isInstalled()))) && ($GLOBALS['template_eval'][$template] == '404')) {
- // Only admins shall see this warning or when installation mode is active
- $ret = '<br /><span class=\\"guest_failed\\">{--TEMPLATE_404--}</span><br />
-(' . $template . ')<br />
-<br />
-{--TEMPLATE_CONTENT--}
-<pre>' . print_r($content, true) . '</pre>
-{--TEMPLATE_DATA--}
-<pre>' . print_r($DATA, true) . '</pre>
-<br /><br />\";';
- } else {
+ }
+
+ // Code set?
+ if ((isset($GLOBALS['template_eval'][$template])) && ($GLOBALS['template_eval'][$template] != '404')) {
// Eval the code
eval($GLOBALS['template_eval'][$template]);
- }
+ } // END - if
// Do we have some content to output or return?
if (!empty($ret)) {
// Return the HTML code
return $ret;
} else {
- // Output direct
+ // Output directly
outputHtml($ret);
}
} elseif (isDebugModeEnabled()) {
}
}
+// Detects the extra template path from given template name
+function detectExtraTemplatePath ($template) {
+ // Default is empty
+ $extraPath = '';
+
+ // Do we have cache?
+ if (!isset($GLOBALS['extra_path'][$template])) {
+ // Check for admin/guest/member/etc. templates
+ if (substr($template, 0, 6) == 'admin_') {
+ // Admin template found
+ $extraPath = 'admin/';
+ } elseif (substr($template, 0, 6) == 'guest_') {
+ // Guest template found
+ $extraPath = 'guest/';
+ } elseif (substr($template, 0, 7) == 'member_') {
+ // Member template found
+ $extraPath = 'member/';
+ } elseif (substr($template, 0, 7) == 'select_') {
+ // Selection template found
+ $extraPath = 'select/';
+ } elseif (substr($template, 0, 8) == 'install_') {
+ // Installation template found
+ $extraPath = 'install/';
+ } elseif (substr($template, 0, 4) == 'ext_') {
+ // Extension template found
+ $extraPath = 'ext/';
+ } elseif (substr($template, 0, 3) == 'la_') {
+ // 'Logical-area' template found
+ $extraPath = 'la/';
+ } elseif (substr($template, 0, 3) == 'js_') {
+ // JavaScript template found
+ $extraPath = 'js/';
+ } elseif (substr($template, 0, 5) == 'menu_') {
+ // Menu template found
+ $extraPath = 'menu/';
+ } else {
+ // Test for extension
+ $test = substr($template, 0, strpos($template, '_'));
+
+ // Probe for valid extension name
+ if (isExtensionNameValid($test)) {
+ // Set extra path to extension's name
+ $extraPath = $test . '/';
+ } // END - if
+ }
+
+ // Store it in cache
+ $GLOBALS['extra_path'][$template] = $extraPath;
+ } // END - if
+
+ // Return result
+ return $GLOBALS['extra_path'][$template];
+}
+
// Loads an email template and compiles it
-function loadEmailTemplate ($template, $content = array(), $UID = '0') {
+function loadEmailTemplate ($template, $content = array(), $userid = '0') {
global $DATA;
- // Our configuration is kept non-global here
- $_CONFIG = getConfigArray();
-
// Make sure all template names are lowercase!
$template = strtolower($template);
// Default 'nickname' if extension is not installed
$nick = '---';
- // Prepare IP number and User Agent
- $REMOTE_ADDR = detectRemoteAddr();
- $HTTP_USER_AGENT = detectUserAgent();
-
- // Default admin
- $ADMIN = getConfig('MAIN_TITLE');
-
- // Is the admin logged in?
- if (isAdmin()) {
- // Get admin id
- $adminId = getCurrentAdminId();
-
- // Load Admin data
- $ADMIN = getAdminEmail($adminId);
- } // END - if
-
// Neutral email address is default
$email = getConfig('WEBMASTER');
- // Expiration in a nice output format
- // NOTE: Use $content[expiration] in your templates instead of $EXPIRATION
- if (getConfig('auto_purge') == 0) {
- // Will never expire!
- $EXPIRATION = getMessage('MAIL_WILL_NEVER_EXPIRE');
- } else {
- // Create nice date string
- $EXPIRATION = createFancyTime(getConfig('auto_purge'));
- }
-
// Is content an array?
if (is_array($content)) {
- // Add expiration to array, $EXPIRATION is now deprecated!
- $content['expiration'] = $EXPIRATION;
+ // Add expiration to array
+ if ((isConfigEntrySet('auto_purge')) && (getConfig('auto_purge') == '0')) {
+ // Will never expire!
+ $content['expiration'] = getMessage('MAIL_WILL_NEVER_EXPIRE');
+ } elseif (isConfigEntrySet('auto_purge')) {
+ // Create nice date string
+ $content['expiration'] = createFancyTime(getConfig('auto_purge'));
+ } else {
+ // Missing entry
+ $content['expiration'] = getMessage('MAIL_NO_CONFIG_AUTO_PURGE');
+ }
} // END - if
// Load user's data
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):UID={$UID},template={$template},content[]=".gettype($content)."<br />");
- if (($UID > 0) && (is_array($content))) {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "UID={$userid},template={$template},content[]=".gettype($content));
+ if (($userid > 0) && (is_array($content))) {
// If nickname extension is installed, fetch nickname as well
- if (isExtensionActive('nickname')) {
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NICKNAME!<br />");
- // Load nickname
- $result = SQL_QUERY_ESC("SELECT `surname`, `family`, `gender`, `email`, `nickname` FROM `{?_MYSQL_PREFIX?}_user_data` WHERE `userid`=%s LIMIT 1",
- array(bigintval($UID)), __FUNCTION__, __LINE__);
+ if ((isExtensionActive('nickname')) && (isNicknameUsed($userid))) {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "NICKNAME!<br />");
+ // Load by nickname
+ fetchUserData($userid, 'nickname');
} else {
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):NO-NICK!<br />");
- /// Load normal data
- $result = SQL_QUERY_ESC("SELECT `surname`, `family`, `gender`, `email` FROM `{?_MYSQL_PREFIX?}_user_data` WHERE `userid`=%s LIMIT 1",
- array(bigintval($UID)), __FUNCTION__, __LINE__);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "NO-NICK!<br />");
+ /// Load by userid
+ fetchUserData($userid);
}
- // Fetch and merge data
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - PRE<br />");
- $content = merge_array($content, SQL_FETCHARRAY($result));
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):content()=".count($content)." - AFTER<br />");
-
- // Free result
- SQL_FREERESULT($result);
+ // Merge data if valid
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "content()=".count($content)." - PRE<br />");
+ if (isUserDataValid()) {
+ $content = merge_array($content, getUserDataArray());
+ } // END - if
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "content()=".count($content)." - AFTER<br />");
} // END - if
- // Translate M to male or F to female if present
- if (isset($content['gender'])) $content['gender'] = translateGender($content['gender']);
-
// Overwrite email from data if present
if (isset($content['email'])) $email = $content['email'];
- // Store email for some functions in global data array
+ // Store email for some functions in global $DATA array
+ // @TODO Do only use $content, not $DATA or raw variables
$DATA['email'] = $email;
// Base directory
$basePath = sprintf("%stemplates/%s/emails/", getConfig('PATH'), getLanguage());
- // Check for admin/guest/member templates
- if (substr($template, 0, 6) == 'admin_') {
- // Admin template found
- $FQFN = $basePath.'admin/' . $template.'.tpl';
- } elseif (substr($template, 0, 6) == 'guest_') {
- // Guest template found
- $FQFN = $basePath.'guest/' . $template.'.tpl';
- } elseif (substr($template, 0, 7) == 'member_') {
- // Member template found
- $FQFN = $basePath.'member/' . $template.'.tpl';
- } else {
- // Test for extension
- $test = substr($template, 0, strpos($template, '_'));
- if (isExtensionNameValid($test)) {
- // Set extra path to extension's name
- $FQFN = $basePath . $test.'/' . $template.'.tpl';
- } else {
- // No special filename
- $FQFN = $basePath . $template.'.tpl';
- }
- }
+ // Detect extra path
+ $extraPath = detectExtraTemplatePath($template);
+
+ // Generate full FQFN
+ $FQFN = $basePath . $extraPath . $template . '.tpl';
// Does the special template exists?
if (!isFileReadable($FQFN)) {
// Reset to default template
- $FQFN = $basePath . $template.'.tpl';
+ $FQFN = $basePath . $template . '.tpl';
} // END - if
// Now does the final template exists?
if (isFileReadable($FQFN)) {
// The local file does exists so we load it. :)
$GLOBALS['tpl_content'] = readFromFile($FQFN);
- $GLOBALS['tpl_content'] = SQL_ESCAPE($GLOBALS['tpl_content']);
// Run code
- $GLOBALS['tpl_content'] = "\$newContent = decodeEntities(\"".compileCode($GLOBALS['tpl_content'])."\");";
+ $GLOBALS['tpl_content'] = '$newContent = decodeEntities("' . compileRawCode(escapeQuotes($GLOBALS['tpl_content'])) . '");';
eval($GLOBALS['tpl_content']);
} elseif (!empty($template)) {
// Template file not found!
- $newContent = "{--TEMPLATE_404--}: " . $template."<br />
-{--TEMPLATE_CONTENT--}
-<pre>".print_r($content, true)."</pre>
-{--TEMPLATE_DATA--}
-<pre>".print_r($DATA, true)."</pre>
-<br /><br />";
+ $newContent = '<div class="para">
+ {--TEMPLATE_404--}: ' . $template . '
+</div>
+<div class="para">
+ {--TEMPLATE_CONTENT--}
+ <pre>' . print_r($content, true) . '</pre>
+ {--TEMPLATE_DATA--}
+ <pre>' . print_r($DATA, true) . '</pre>
+</div>';
// Debug mode not active? Then remove the HTML tags
if (!isDebugModeEnabled()) $newContent = secureString($newContent);
// Is there some content?
if (empty($newContent)) {
// Compiling failed
- $newContent = "Compiler error for template {$template}!\nUncompiled content:\n" . $GLOBALS['tpl_content'];
+ $newContent = "Compiler error for template " . $template . " !\nUncompiled content:\n" . $GLOBALS['tpl_content'];
+
// Add last error if the required function exists
if (function_exists('error_get_last')) $newContent .= "\n--------------------------------------\nDebug:\n".print_r(error_get_last(), true)."--------------------------------------\nPlease don't alter these informations!\nThanx.";
} // END - if
unset($content);
unset($DATA);
- // Return compiled content
- return compileCode($newContent);
+ // Return content
+ return $newContent;
}
// Send mail out to an email address
function sendEmail ($toEmail, $subject, $message, $isHtml = 'N', $mailHeader = '') {
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$toEmail},SUBJECT={$subject}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail},SUBJECT={$subject}<br />");
// Compile subject line (for POINTS constant etc.)
- eval("\$subject = decodeEntities(\"".compileCode(smartAddSlashes($subject))."\");");
+ eval('$subject = decodeEntities("' . compileRawCode(escapeQuotes($subject)) . '");');
// Set from header
- if ((!eregi('@', $toEmail)) && ($toEmail > 0)) {
+ if ((!isInStringIgnoreCase('@', $toEmail)) && ($toEmail > 0)) {
// Value detected, is the message extension installed?
// @TODO Extension 'msg' does not exist
if (isExtensionActive('msg')) {
ADD_MESSAGE_TO_BOX($toEmail, $subject, $message, $isHtml);
return;
} else {
- // Load email address
- $result_email = SQL_QUERY_ESC("SELECT `email` FROM `{?_MYSQL_PREFIX?}_user_data` WHERE `userid`=%s LIMIT 1",
- array(bigintval($toEmail)), __FUNCTION__, __LINE__);
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):numRows=".SQL_NUMROWS($result_email)."<br />");
-
// Does the user exist?
- if (SQL_NUMROWS($result_email)) {
- // Load email address
- list($toEmail) = SQL_FETCHROW($result_email);
+ if (fetchUserData($toEmail)) {
+ // Get the email
+ $toEmail = getUserData('email');
} else {
// Set webmaster
$toEmail = getConfig('WEBMASTER');
}
-
- // Free result
- SQL_FREERESULT($result_email);
}
} elseif ($toEmail == '0') {
// Is the webmaster!
$toEmail = getConfig('WEBMASTER');
}
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):TO={$toEmail}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "TO={$toEmail}<br />");
// Check for PHPMailer or debug-mode
- if (!checkPhpMailerUsage()) {
+ if ((!checkPhpMailerUsage()) || (isDebugModeEnabled())) {
// Not in PHPMailer-Mode
if (empty($mailHeader)) {
// Load email header template
// Append header
$mailHeader .= loadEmailTemplate('header');
}
- } elseif (isDebugModeEnabled()) {
- if (empty($mailHeader)) {
- // Load email header template
- $mailHeader = loadEmailTemplate('header');
- } else {
- // Append header
- $mailHeader .= loadEmailTemplate('header');
- }
- }
-
- // Compile "TO"
- eval("\$toEmail = \"".compileCode(smartAddSlashes($toEmail))."\";");
-
- // Compile "MSG"
- eval("\$message = \"".compileCode(smartAddSlashes($message))."\";");
+ } // END - if
// Fix HTML parameter (default is no!)
if (empty($isHtml)) $isHtml = 'N';
+
+ // Debug mode enabled?
if (isDebugModeEnabled()) {
// In debug mode we want to display the mail instead of sending it away so we can debug this part
- outputHtml("<pre>
-".htmlentities(trim($mailHeader))."
-To : " . $toEmail."
-Subject : " . $subject."
-Message : " . $message."
-</pre>\n");
+ outputHtml('<pre>
+Headers : ' . htmlentities(utf8_decode(trim($mailHeader))) . '
+To : ' . htmlentities(utf8_decode($toEmail)) . '
+Subject : ' . htmlentities(utf8_decode($subject)) . '
+Message : ' . htmlentities(utf8_decode($message)) . '
+</pre>');
+
+ // This is always fine
+ return true;
} elseif (($isHtml == 'Y') && (isExtensionActive('html_mail'))) {
// Send mail as HTML away
- sendHtmlEmail($toEmail, $subject, $message, $mailHeader);
+ return sendHtmlEmail($toEmail, $subject, $message, $mailHeader);
} elseif (!empty($toEmail)) {
// Send Mail away
- sendRawEmail($toEmail, $subject, $message, $mailHeader);
+ return sendRawEmail($toEmail, $subject, $message, $mailHeader);
} elseif ($isHtml != 'Y') {
// Problem found!
- sendRawEmail(getConfig('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader);
+ return sendRawEmail(getConfig('WEBMASTER'), '[PROBLEM:]' . $subject, $message, $mailHeader);
}
+
+ // Why did we end up here? This should not happen
+ debug_report_bug(__FUNCTION__, __LINE__, 'Ending up: template=' . $template);
}
-// Check if legacy or PHPMailer command
+// Check to use wether legacy mail() command or PHPMailer class
// @TODO Rewrite this to an extension 'smtp'
// @private
function checkPhpMailerUsage() {
// Send out a raw email with PHPMailer class or legacy mail() command
function sendRawEmail ($toEmail, $subject, $message, $from) {
+ // Just compile all again, to put out all configs, etc.
+ eval('$toEmail = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($toEmail)), false) . '");');
+ eval('$subject = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($subject)), false) . '");');
+ eval('$message = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($message)), false) . '");');
+ eval('$from = decodeEntities("' . doFinalCompilation(compileRawCode(escapeQuotes($from)) , false) . '");');
+
// Shall we use PHPMailer class or legacy mode?
if (checkPhpMailerUsage()) {
// Use PHPMailer class with SMTP enabled
// get new instance
$mail = new PHPMailer();
+
+ // Set charset to UTF-8
+ $mail->CharSet = 'UTF-8';
+
+ // Path for PHPMailer
$mail->PluginDir = sprintf("%sinc/phpmailer/", getConfig('PATH'));
$mail->IsSMTP();
$mail->AddCustomHeader('Errors-To:' . getConfig('WEBMASTER'));
$mail->AddCustomHeader('X-Loop:' . getConfig('WEBMASTER'));
$mail->Send();
+
+ // Has an error occured?
+ if (!empty($mail->ErrorInfo)) {
+ // Log message
+ logDebugMessage(__FUNCTION__, __LINE__, 'Error while sending mail: ' . $mail->ErrorInfo);
+
+ // Raise an error
+ return false;
+ } else {
+ // All fine!
+ return true;
+ }
} else {
// Use legacy mail() command
- mail($toEmail, $subject, decodeEntities($message), $from);
+ return mail($toEmail, $subject, decodeEntities($message), $from);
}
}
// Generate a password in a specified length or use default password length
-function generatePassword ($length = 0) {
+function generatePassword ($length = '0') {
// Auto-fix invalid length of zero
- if ($length == 0) $length = getConfig('pass_len');
+ if ($length == '0') $length = getConfig('pass_len');
// Initialize array with all allowed chars
$ABC = explode(',', 'a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,0,1,2,3,4,5,6,7,8,9,-,+,_,/,.');
// Start creating password
$PASS = '';
- for ($i = 0; $i < $length; $i++) {
+ for ($i = '0'; $i < $length; $i++) {
$PASS .= $ABC[mt_rand(0, count($ABC) -1)];
} // END - for
$time = bigintval($time);
// If the stamp is zero it mostly didn't "happen"
- if ($time == 0) {
+ if ($time == '0') {
// Never happend
return getMessage('NEVER_HAPPENED');
} // END - if
case 'de': // German date / time format
switch ($mode) {
case '0': $ret = date("d.m.Y \u\m H:i \U\h\\r", $time); break;
- case '1': $ret = strtolower(date("d.m.Y - H:i", $time)); break;
- case '2': $ret = date("d.m.Y|H:i", $time); break;
- case '3': $ret = date("d.m.Y", $time); break;
+ case '1': $ret = strtolower(date('d.m.Y - H:i', $time)); break;
+ case '2': $ret = date('d.m.Y|H:i', $time); break;
+ case '3': $ret = date('d.m.Y', $time); break;
default:
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
break;
default: // Default is the US date / time format!
switch ($mode) {
- case '0': $ret = date("r", $time); break;
- case '1': $ret = date("Y-m-d - g:i A", $time); break;
- case '2': $ret = date("y-m-d|H:i", $time); break;
- case '3': $ret = date("y-m-d", $time); break;
+ case '0': $ret = date('r', $time); break;
+ case '1': $ret = date('Y-m-d - g:i A', $time); break;
+ case '2': $ret = date('y-m-d|H:i', $time); break;
+ case '3': $ret = date('y-m-d', $time); break;
default:
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Invalid date mode %s detected.", $mode));
break;
// Translates Y/N to yes/no
function translateYesNo ($yn) {
// Default
- $translated = "??? (" . $yn.')';
+ $translated = '??? (' . $yn . ')';
switch ($yn) {
case 'Y': $translated = getMessage('YES'); break;
case 'N': $translated = getMessage('NO'); break;
// Log unknown value
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected Y/N!", $yn));
break;
- }
+ } // END - switch
// Return it
return $translated;
// Translates the "pool type" into human-readable
function translatePoolType ($type) {
// Default?type is unknown
- $translated = sprintf(getMessage('POOL_TYPE_UNKNOWN'), $type);
+ $translated = getMaskedMessage('POOL_TYPE_UNKNOWN', $type);
// Generate constant
$constName = sprintf("POOL_TYPE_%s", $type);
}
// Translates the american decimal dot into a german comma
-function translateComma ($dotted, $cut = true, $max = 0) {
+function translateComma ($dotted, $cut = true, $max = '0') {
+ // First, cast all to double, due to PHP changes
+ $dotted = (double) $dotted;
+
// Default is 3 you can change this in admin area "Misc -> Misc Options"
- if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', '3');
+ if (!isConfigEntrySet('max_comma')) setConfigEntry('max_comma', 3);
// Use from config is default
$maxComma = getConfig('max_comma');
if ($max > 0) $maxComma = $max;
// Cut zeros off?
- if (($cut === true) && ($max == 0)) {
+ if (($cut === true) && ($max == '0')) {
// Test for commata if in cut-mode
$com = explode('.', $dotted);
if (count($com) < 2) {
// Don't display commatas even if there are none... ;-)
- $maxComma = 0;
+ $maxComma = '0';
}
} // END - if
default: // All others
$dotted = number_format($dotted, $maxComma, '.', ',');
break;
- }
+ } // END - switch
// Return translated value
return $dotted;
case 'F': $ret = getMessage('GENDER_F'); break;
case 'C': $ret = getMessage('GENDER_C'); break;
default:
- // Log unknown gender
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
+ // Please report bugs on unknown genders
+ debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown gender %s detected.", $gender));
break;
- }
+ } // END - switch
// Return translated gender
return $ret;
break;
default:
- logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
- $ret = sprintf(getMessage('UNKNOWN_STATUS'), $status);
+ // Please report all unknown status
+ debug_report_bug(__FUNCTION__, __LINE__, sprintf("Unknown status %s detected.", $status));
break;
} // END - switch
return $ret;
}
+// "Translates" 'visible' and 'locked' to a CSS class
+function translateMenuVisibleLocked ($content, $prefix = '') {
+ // Translate 'visible' and keep an eye on the prefix
+ switch ($content['visible']) {
+ // Should be visible
+ case 'Y': $content['visible_css'] = $prefix . 'menu_visible' ; break;
+ case 'N': $content['visible_css'] = $prefix . 'menu_invisible'; break;
+ default:
+ // Please report this
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported visible value detected. content=<pre>' . print_r($content, true) . '</pre>');
+ break;
+ } // END - switch
+
+ // Translate 'locked' and keep an eye on the prefix
+ switch ($content['locked']) {
+ // Should be locked
+ case 'Y': $content['locked_css'] = $prefix . 'menu_locked' ; break;
+ case 'N': $content['locked_css'] = $prefix . 'menu_unlocked'; break;
+ default:
+ // Please report this
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported locked value detected. content=<pre>' . print_r($content, true) . '</pre>');
+ break;
+ } // END - switch
+
+ // Return the resulting array
+ return $content;
+}
+
+// "Getter" for menu CSS classes, mainly used in templates
+function getMenuCssClasses ($data) {
+ // $data needs to be converted into an array
+ $content = explode('|', $data);
+
+ // Non-existent index 2 will happen in menu blocks
+ if (!isset($content[2])) $content[2] = '';
+
+ // Re-construct the array: 0=visible,1=locked,2=prefix
+ $content['visible'] = $content[0];
+ $content['locked'] = $content[1];
+
+ // Call our "translator" function
+ $content = translateMenuVisibleLocked($content, $content[2]);
+
+ // Return CSS classes
+ return ($content['visible_css'] . ' ' . $content['locked_css']);
+}
+
// Generates an URL for the dereferer
function generateDerefererUrl ($URL) {
// Don't de-refer our own links!
if (substr($URL, 0, strlen(getConfig('URL'))) != getConfig('URL')) {
// De-refer this link
- $URL = 'modules.php?module=loader&url=' . encodeString(compileUriCode($URL));
+ $URL = '{%url=modules.php?module=loader&url=' . encodeString(compileUriCode($URL)) . '%}';
} // END - if
// Return link
// Generates an URL for the frametester
function generateFrametesterUrl ($URL) {
// Prepare frametester URL
- $frametesterUrl = sprintf("{?URL?}/modules.php?module=frametester&url=%s",
+ $frametesterUrl = sprintf("{%%url=modules.php?module=frametester&url=%s%%}",
encodeString(compileUriCode($URL))
);
} // END - if
// Init count
- $ret = 0;
+ $ret = '0';
// Count all entries
foreach ($array as $key => $selected) {
// Generate XHTML code for the CAPTCHA
function generateCaptchaCode ($code, $type, $DATA, $userid) {
- return '<IMG border="0" alt="Code" src="{?URL?}/mailid_top.php?userid=' . $userid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '" />';
+ return '<img border="0" alt="Code ' . $code . '" src="{%url=mailid_top.php?userid=' . $userid . '&' . $type . '=' . $DATA . '&mode=img&code=' . $code . '%}" />';
}
// Generates a timestamp (some wrapper for mktime())
-function makeTime ($H, $M, $S, $stamp) {
+function makeTime ($hours, $minutes, $seconds, $stamp) {
// Extract day, month and year from given timestamp
- $day = date('d', $stamp);
- $month = date('m', $stamp);
- $year = date('Y', $stamp);
+ $days = date('d', $stamp);
+ $months = date('m', $stamp);
+ $years = date('Y', $stamp);
// Create timestamp for wished time which depends on extracted date
- return mktime($H, $M, $S, $month, $day, $year);
+ return mktime(
+ $hours,
+ $minutes,
+ $seconds,
+ $months,
+ $days,
+ $years
+ );
}
// Redirects to an URL and if neccessarry extends it with own base URL
-function redirectToUrl ($URL) {
- // Compile out URI codes
- $URL = compileUriCode($URL);
-
- // Check if http(s):// is there
- if ((substr($URL, 0, 7) != 'http://') && (substr($URL, 0, 8) != 'https://')) {
- // Make all URLs full-qualified
- $URL = getConfig('URL') . '/' . $URL;
- } // END - if
-
- // Three different debug ways...
- //* DEBUG: */ debug_report_bug(sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, $URL);
- //* DEBUG: */ die($URL);
+function redirectToUrl ($URL, $allowSpider = true) {
+ // Compile out codes
+ eval('$URL = "' . compileRawCode(encodeUrl($URL)) . '";');
// Default 'rel' value is external, nofollow is evil from Google and hurts the Internet
$rel = ' rel="external"';
$rel = '';
} // END - if
- // Get output buffer
- $GLOBALS['output'] = ob_get_contents();
-
- // Clear it only if there is content
- if (!empty($GLOBALS['output'])) {
- clearOutputBuffer();
- } // END - if
+ // Three different ways to debug...
+ //* DEBUG: */ debug_report_bug(__FUNCTION__, __LINE__, sprintf("%s[%s:] URL=%s", __FUNCTION__, __LINE__, $URL));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'URL=' . $URL);
+ //* DEBUG: */ die($URL);
// Simple probe for bots/spiders from search engines
- if ((strpos(detectUserAgent(), 'spider') !== false) || (strpos(detectUserAgent(), 'bot') !== false)) {
- // Secure the URL against bad things such als HTML insertions and so on...
- $URL = secureString($URL);
+ if ((isSpider()) && ($allowSpider === true)) {
+ // Set HTTP-Status
+ setHttpStatus('200 OK');
+
+ // Set content-type here to fix a missing array element
+ setContentType('text/html');
// Output new location link as anchor
- outputHtml('<a href="' . $URL . '"' . $rel . '>' . $URL . '</a>');
+ outputHtml('<a href="' . $URL . '"' . $rel . '>' . secureString($URL) . '</a>');
} elseif (!headers_sent()) {
+ // Clear output buffer
+ clearOutputBuffer();
+
+ // Clear own output buffer
+ $GLOBALS['output'] = '';
+
+ // Set header
+ setHttpStatus('302 Found');
+
// Load URL when headers are not sent
- //* DEBUG: */ debug_report_bug("URL={$URL}");
- sendHeader('Location: '.str_replace('&', '&', $URL));
+ sendRawRedirect(doFinalCompilation(str_replace('&', '&', $URL), false));
} else {
// Output error message
loadInclude('inc/header.php');
// Wrapper for redirectToUrl but URL comes from a configuration entry
function redirectToConfiguredUrl ($configEntry) {
- // Get the URL
- $URL = getConfig($configEntry);
-
- // Is this URL set?
- if (is_null($URL)) {
- // Then abort here
- debug_report_bug(sprintf("Configuration entry %s is not set!", $configEntry));
- } // END - if
-
// Load the URL
- redirectToUrl($URL);
+ redirectToUrl(getConfig($configEntry));
}
// Compiles the given HTML/mail code
return $code;
} // END - if
- // Init replacement-array with full security characters
- $secChars = $GLOBALS['security_chars'];
+ // Start couting
+ $startCompile = microtime(true);
- // Select smaller set of chars to replace when we e.g. want to compile URLs
- if ($full === false) $secChars = $GLOBALS['url_chars'];
+ // Comile the code
+ $code = compileRawCode($code, $simple, $constants, $full);
- // Compile more through a filter
- $code = runFilterChain('compile_code', $code);
+ // Get timing
+ $compiled = microtime(true);
- // Compile constants
- if ($constants === true) {
- // BEFORE 0.2.1 : Language and data constants
- // WITH 0.2.1+ : Only language constants
- $code = str_replace('{--', "\".getMessage('", str_replace('--}', "').\"", $code));
+ // Add timing if enabled
+ if (isTemplateHtml()) {
+ // Add timing, this should be disabled in
+ $code .= '<!-- Compilation time: ' . (($compiled - $startCompile) * 1000). 'ms //-->';
+ } // END - if
+
+ // Return compiled code
+ return $code;
+}
- // BEFORE 0.2.1 : Not used
- // WITH 0.2.1+ : Data constants
- $code = str_replace('{!', "\".constant('", str_replace("!}", "').\"", $code));
+// Compiles the code (use compileCode() only for HTML because of the comments)
+// @TODO $simple/$constants are deprecated
+function compileRawCode ($code, $simple = false, $constants = true, $full = true) {
+ // Is the code a string?
+ if (!is_string($code)) {
+ // Silently return it
+ return $code;
} // END - if
+ // Init replacement-array with smaller set of security characters
+ $secChars = $GLOBALS['url_chars'];
+
+ // Select full set of chars to replace when we e.g. want to compile URLs
+ if ($full === true) $secChars = $GLOBALS['security_chars'];
+
+ // Compile more through a filter
+ $code = runFilterChain('compile_code', $code);
+
+ // Compile message strings
+ $code = str_replace('{--', '{%message,', str_replace('--}', '%}', $code));
+
// Compile QUOT and other non-HTML codes
foreach ($secChars['to'] as $k => $to) {
// Do the reversed thing as in inc/libs/security_functions.php
$code = str_replace($to, $secChars['from'][$k], $code);
} // END - foreach
- // But shall I keep simple quotes for later use?
- if ($simple) $code = str_replace("'", '{QUOT}', $code);
-
// Find $content[bla][blub] entries
+ // @TODO Do only use $content and deprecate $GLOBALS and $DATA in templates
preg_match_all('/\$(content|GLOBALS|DATA)((\[([a-zA-Z0-9-_]+)\])*)/', $code, $matches);
// Are some matches found?
$test = substr($found, 0, strlen($match));
// Does this entry exist?
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):found={$found},match={$match},set={$set}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "found={$found},match={$match},set={$set}<br />");
if ($test == $match) {
// Match found!
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):fuzzyFound!<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "fuzzyFound!<br />");
$fuzzyFound = true;
break;
} // END - if
if ($fuzzyFound === true) continue;
// Take all string elements
- if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key."_" . $matches[4][$key]]))) {
+ if ((is_string($matches[4][$key])) && (!isset($matchesFound[$match])) && (!isset($matchesFound[$key.'_' . $matches[4][$key]]))) {
// Replace it in the code
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):key={$key},match={$match}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "key={$key},match={$match}<br />");
$newMatch = str_replace('[', "['", str_replace(']', "']", $match));
- $code = str_replace($match, "\"." . $newMatch.".\"", $code);
+ $code = str_replace($match, '".' . $newMatch . '."', $code);
$matchesFound[$key . '_' . $matches[4][$key]] = 1;
$matchesFound[$match] = 1;
} elseif (!isset($matchesFound[$match])) {
// Not yet replaced!
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):match={$match}<br />");
- $code = str_replace($match, "\"." . $match.".\"", $code);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "match={$match}<br />");
+ $code = str_replace($match, '".' . $match . '."', $code);
$matchesFound[$match] = 1;
}
} // END - foreach
} // END - if
- // Return compiled code
+ // Return it
return $code;
}
* Sie, dass es doch nicht so schwer ist! :-) *
* *
************************************************************************/
-function array_pk_sort (&$array, $a_sort, $primary_key = 0, $order = -1, $nums = false) {
+function array_pk_sort (&$array, $a_sort, $primary_key = '0', $order = -1, $nums = false) {
$dummy = $array;
while ($primary_key < count($a_sort)) {
foreach ($dummy[$a_sort[$primary_key]] as $key => $value) {
}
//
-function addSelectionBox ($type, $default, $prefix = '', $id = '0') {
+function addSelectionBox ($type, $default, $prefix = '', $id = '0', $class = 'register_select') {
$OUT = '';
if ($type == 'yn') {
// This is a yes/no selection only!
- if ($id > 0) $prefix .= "[" . $id."]";
- $OUT .= " <select name=\"" . $prefix."\" class=\"register_select\" size=\"1\">\n";
+ if ($id > 0) $prefix .= '[' . $id . ']';
+ $OUT .= '<select name="' . $prefix . '" class="' . $class . '" size="1">';
} else {
// Begin with regular selection box here
- if (!empty($prefix)) $prefix .= "_";
+ if (!empty($prefix)) $prefix .= '_';
$type2 = $type;
- if ($id > 0) $type2 .= "[" . $id."]";
- $OUT .= " <select name=\"".strtolower($prefix . $type2)."\" class=\"register_select\" size=\"1\">\n";
+ if ($id > 0) $type2 .= '[' . $id . ']';
+ $OUT .= '<select name="' . strtolower($prefix . $type2) . '" class="' . $class . '" size="1">';
}
switch ($type) {
case 'day': // Day
for ($idx = 1; $idx < 32; $idx++) {
- $OUT .= "<option value=\"" . $idx."\"";
+ $OUT .= '<option value="' . $idx . '"';
if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
+ $OUT .= '>' . $idx . '</option>';
} // END - for
break;
case 'month': // Month
- foreach ($GLOBALS['month_descr'] as $month => $descr) {
- $OUT .= "<option value=\"" . $month."\"";
- if ($default == $month) $OUT .= ' selected="selected"';
- $OUT .= ">" . $descr."</option>\n";
+ foreach ($GLOBALS['month_descr'] as $idx => $descr) {
+ $OUT .= '<option value="' . $idx . '"';
+ if ($default == $idx) $OUT .= ' selected="selected"';
+ $OUT .= '>' . $descr . '</option>';
} // END - for
break;
$year = date('Y', time());
// Use configured min age or fixed?
- if ((isExtensionActive('other')) && (getExtensionVersion('other') >= '0.2.1')) {
+ if (isExtensionInstalledAndNewer('order', '0.2.1')) {
// Configured
$startYear = $year - getConfig('min_age');
} else {
// Check if the default value is larger than minimum and bigger than actual year
if (($default > $minYear) && ($default >= $year)) {
for ($idx = $year; $idx < ($year + 11); $idx++) {
- $OUT .= "<option value=\"" . $idx."\"";
+ $OUT .= '<option value="' . $idx . '"';
if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
+ $OUT .= '>' . $idx . '</option>';
} // END - for
} elseif ($default == -1) {
// Current year minus 1
- for ($idx = $startYear; $idx <= ($year + 1); $idx++)
- {
- $OUT .= "<option value=\"" . $idx."\">" . $idx."</option>\n";
- }
+ for ($idx = $startYear; $idx <= ($year + 1); $idx++) {
+ $OUT .= '<option value="' . $idx . '">' . $idx . '</option>';
+ } // END - for
} else {
// Get current year and subtract the configured minimum age
- $OUT .= "<option value=\"".($minYear - 1)."\"><" . $minYear."</option>\n";
+ $OUT .= '<option value="' . ($minYear - 1) . '"><' . $minYear . '</option>';
// Calculate earliest year depending on extension version
- if ((isExtensionActive('other')) && (getExtensionVersion('other') >= '0.2.1')) {
+ if (isExtensionInstalledAndNewer('order', '0.2.1')) {
// Use configured minimum age
$year = date('Y', time()) - getConfig('min_age');
} else {
// Construct year selection list
for ($idx = $minYear; $idx <= $year; $idx++) {
- $OUT .= "<option value=\"" . $idx."\"";
+ $OUT .= '<option value="' . $idx . '"';
if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
+ $OUT .= '>' . $idx . '</option>';
} // END - for
}
break;
case 'min':
for ($idx = 0; $idx < 60; $idx+=5) {
if (strlen($idx) == 1) $idx = '0' . $idx;
- $OUT .= "<option value=\"" . $idx."\"";
+ $OUT .= '<option value="' . $idx . '"';
if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
+ $OUT .= '>' . $idx . '</option>';
} // END - for
break;
case 'hour':
for ($idx = 0; $idx < 24; $idx++) {
if (strlen($idx) == 1) $idx = '0' . $idx;
- $OUT .= "<option value=\"" . $idx."\"";
+ $OUT .= '<option value="' . $idx . '"';
if ($default == $idx) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
+ $OUT .= '>' . $idx . '</option>';
} // END - for
break;
case 'yn':
- $OUT .= "<option value=\"Y\"";
+ $OUT .= '<option value="Y"';
if ($default == 'Y') $OUT .= ' selected="selected"';
- $OUT .= ">{--YES--}</option>\n<option value=\"N\"";
+ $OUT .= '>{--YES--}</option><option value="N"';
if ($default != 'Y') $OUT .= ' selected="selected"';
- $OUT .= ">{--NO--}</option>\n";
+ $OUT .= '>{--NO--}</option>';
break;
}
- $OUT .= " </select>\n";
+ $OUT .= '</select>';
return $OUT;
}
//
function generateRandomCode ($length, $code, $userid, $DATA = '') {
// Build server string
- $server = $_SERVER['PHP_SELF'] . getConfig('ENCRYPT_SEPERATOR') . detectUserAgent() . getConfig('ENCRYPT_SEPERATOR') . getenv('SERVER_SOFTWARE') . getConfig('ENCRYPT_SEPERATOR') . detectRemoteAddr().":'.':".filemtime(getConfig('PATH').'inc/databases.php');
+ $server = $_SERVER['PHP_SELF'] . getConfig('ENCRYPT_SEPERATOR') . detectUserAgent() . getConfig('ENCRYPT_SEPERATOR') . getenv('SERVER_SOFTWARE') . getConfig('ENCRYPT_SEPERATOR') . detectRemoteAddr();
// Build key string
$keys = getConfig('SITE_KEY') . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY');
$data .= getConfig('ENCRYPT_SEPERATOR') . determineReferalId();
$data .= getConfig('ENCRYPT_SEPERATOR') . getLanguage();
$data .= getConfig('ENCRYPT_SEPERATOR') . getCurrentTheme();
- $data .= getConfig('ENCRYPT_SEPERATOR') . getUserId();
+ $data .= getConfig('ENCRYPT_SEPERATOR') . getMemberId();
// Calculate number for generating the code
$a = $code + getConfig('_ADD') - 1;
- if (isConfigEntrySet('master_hash')) {
+ if (isConfigEntrySet('master_salt')) {
// Generate hash with master salt from modula of number with the prime number and other data
$saltedHash = generateHash(($a % getConfig('_PRIME')) . getConfig('ENCRYPT_SEPERATOR') . $server . getConfig('ENCRYPT_SEPERATOR') . $keys . getConfig('ENCRYPT_SEPERATOR') . $data . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY') . getConfig('ENCRYPT_SEPERATOR') . $a, getConfig('master_salt'));
$rcode = hexdec(substr($saltedHash, strlen(getConfig('master_salt')), 9)) / abs(getConfig('rand_no') - $a + sqrt(getConfig('_ADD'))) / pi();
} else {
// Generate hash with "hash of site key" from modula of number with the prime number and other data
- $saltedHash = generateHash(($a % getConfig('_PRIME')) . getConfig('ENCRYPT_SEPERATOR') . $server . getConfig('ENCRYPT_SEPERATOR') . $keys . getConfig('ENCRYPT_SEPERATOR') . $data . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY') . getConfig('ENCRYPT_SEPERATOR') . $a, substr(sha1(getConfig('SITE_KEY')), 0, 8));
+ $saltedHash = generateHash(($a % getConfig('_PRIME')) . getConfig('ENCRYPT_SEPERATOR') . $server . getConfig('ENCRYPT_SEPERATOR') . $keys . getConfig('ENCRYPT_SEPERATOR') . $data . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY') . getConfig('ENCRYPT_SEPERATOR') . $a, substr(sha1(getConfig('SITE_KEY')), 0, getConfig('salt_length')));
// Create number from hash
$rcode = hexdec(substr($saltedHash, 8, 9)) / abs(getConfig('rand_no') - $a + sqrt(getConfig('_ADD'))) / pi();
// At least 10 numbers shall be secure enought!
$len = getConfig('code_length');
- if ($len == 0) $len = $length;
- if ($len == 0) $len = 10;
+ if ($len == '0') $len = $length;
+ if ($len == '0') $len = 10;
// Cut off requested counts of number
$return = substr(str_replace('.', '', $rcode), 0, $len);
}
// Does only allow numbers
-function bigintval ($num, $castValue = true) {
+function bigintval ($num, $castValue = true, $abortOnMismatch = true) {
// Filter all numbers out
- $ret = preg_replace("/[^0123456789]/", '', $num);
+ $ret = preg_replace('/[^0123456789]/', '', $num);
// Shall we cast?
- if ($castValue) $ret = (double)$ret;
+ if ($castValue === true) $ret = (double)$ret;
// Has the whole value changed?
- // @TODO Remove this if() block if all is working fine
- if ('' . $ret . '' != '' . $num . '') {
+ if (('' . $ret . '' != '' . $num . '') && ($abortOnMismatch === true)) {
// Log the values
- //debug_report_bug("{$ret}<>{$num}");
+ debug_report_bug(__FUNCTION__, __LINE__, 'Problem with number found. ret=' . $ret . ', num='. $num);
} // END - if
// Return result
}
// Insert the code in $img_code into jpeg or PNG image
-function generateImageOrCode ($img_code, $headerSent=true) {
- if ((strlen($img_code) > 6) || (empty($img_code)) || (getConfig('code_length') == 0)) {
+function generateImageOrCode ($img_code, $headerSent = true) {
+ // Is the code size oversized or shouldn't we display it?
+ if ((strlen($img_code) > 6) || (empty($img_code)) || (getConfig('code_length') == '0')) {
// Stop execution of function here because of over-sized code length
- return;
+ debug_report_bug(__FUNCTION__, __LINE__, 'img_code ' . $img_code .' has invalid length. img_code()=' . strlen($img_code) . ' code_length=' . getConfig('code_length'));
} elseif ($headerSent === false) {
- // Return in an HTML code code
- return "<img src=\"{?URL?}/img.php?code=" . $img_code."\" alt=\"Image\" />\n";
+ // Return an HTML code here
+ return '<img src="{%url=img.php?code=' . $img_code . '%}" alt="Image" />';
}
// Load image
- $img = sprintf("%s/theme/%s/images/code_bg.%s", getConfig('PATH'), getCurrentTheme(), getConfig('img_type'));
+ $img = sprintf("%s/theme/%s/images/code_bg.%s",
+ getConfig('PATH'),
+ getCurrentTheme(),
+ getConfig('img_type')
+ );
+
+ // Is it readable?
if (isFileReadable($img)) {
// Switch image type
- switch (getConfig('img_type'))
- {
+ switch (getConfig('img_type')) {
case 'jpg':
// Okay, load image and hide all errors
$image = imagecreatefromjpeg($img);
// Okay, load image and hide all errors
$image = imagecreatefrompng($img);
break;
- }
+ } // END - switch
} else {
// Exit function here
logDebugMessage(__FUNCTION__, __LINE__, sprintf("File for image type %s not found.", getConfig('img_type')));
switch (getConfig('img_type')) {
case 'jpg': imagejpeg($image); break;
case 'png': imagepng($image); break;
- }
+ } // END - switch
// Remove image from memory
imagedestroy($image);
}
// Create selection box or array of splitted timestamp
function createTimeSelections ($timestamp, $prefix = '', $display = '', $align = 'center', $return_array=false) {
+ // Do not continue if ONE_DAY is absend
+ if (!isConfigEntrySet('ONE_DAY')) {
+ // And return the timestamp itself or empty array
+ if ($return_array === true) {
+ return array();
+ } else {
+ return $timestamp;
+ }
+ } // END - if
+
// Calculate 2-seconds timestamp
$stamp = round($timestamp);
- //* DEBUG: */ print("*" . $stamp.'/' . $timestamp."*<br />");
+ //* DEBUG: */ debugOutput('*' . $stamp .'/' . $timestamp . '*');
// Do we have a leap year?
- $SWITCH = 0;
+ $SWITCH = '0';
$TEST = date('Y', time()) / 4;
$M1 = date('m', time());
$M2 = date('m', (time() + $timestamp));
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($M2 > "02")) $SWITCH = getConfig('ONE_DAY');
+ if ((floor($TEST) == $TEST) && ($M1 == '02') && ($M2 > '02')) $SWITCH = getConfig('ONE_DAY');
// First of all years...
$Y = abs(floor($timestamp / (31536000 + $SWITCH)));
- //* DEBUG: */ print("Y={$Y}<br />");
+ //* DEBUG: */ debugOutput('Y=' . $Y);
// Next months...
$M = abs(floor($timestamp / 2628000 - $Y * 12));
- //* DEBUG: */ print("M={$M}<br />");
+ //* DEBUG: */ debugOutput('M=' . $M);
// Next weeks
$W = abs(floor($timestamp / 604800 - $Y * ((365 + $SWITCH / getConfig('ONE_DAY')) / 7) - ($M / 12 * (365 + $SWITCH / getConfig('ONE_DAY')) / 7)));
- //* DEBUG: */ print("W={$W}<br />");
+ //* DEBUG: */ debugOutput('W=' . $W);
// Next days...
$D = abs(floor($timestamp / 86400 - $Y * (365 + $SWITCH / getConfig('ONE_DAY')) - ($M / 12 * (365 + $SWITCH / getConfig('ONE_DAY'))) - $W * 7));
- //* DEBUG: */ print("D={$D}<br />");
+ //* DEBUG: */ debugOutput('D=' . $D);
// Next hours...
$h = abs(floor($timestamp / 3600 - $Y * (365 + $SWITCH / getConfig('ONE_DAY')) * 24 - ($M / 12 * (365 + $SWITCH / getConfig('ONE_DAY')) * 24) - $W * 7 * 24 - $D * 24));
- //* DEBUG: */ print("h={$h}<br />");
+ //* DEBUG: */ debugOutput('h=' . $h);
// Next minutes..
$m = abs(floor($timestamp / 60 - $Y * (365 + $SWITCH / getConfig('ONE_DAY')) * 24 * 60 - ($M / 12 * (365 + $SWITCH / getConfig('ONE_DAY')) * 24 * 60) - $W * 7 * 24 * 60 - $D * 24 * 60 - $h * 60));
- //* DEBUG: */ print("m={$m}<br />");
+ //* DEBUG: */ debugOutput('m=' . $m);
// And at last seconds...
$s = abs(floor($timestamp - $Y * (365 + $SWITCH / getConfig('ONE_DAY')) * 24 * 3600 - ($M / 12 * (365 + $SWITCH / getConfig('ONE_DAY')) * 24 * 3600) - $W * 7 * 24 * 3600 - $D * 24 * 3600 - $h * 3600 - $m * 60));
- //* DEBUG: */ print("s={$s}<br />");
+ //* DEBUG: */ debugOutput('s=' . $s);
// Is seconds zero and time is < 60 seconds?
- if (($s == 0) && ($timestamp < 60)) {
+ if (($s == '0') && ($timestamp < 60)) {
// Fix seconds
$s = round($timestamp);
} // END - if
);
} else {
// Generate table
- $OUT = "<div align=\"" . $align."\">\n";
- $OUT .= "<table border=\"0\" cellspacing=\"0\" cellpadding=\"0\" class=\"admin_table dashed\">\n";
- $OUT .= "<tr>\n";
+ $OUT = '<div align="' . $align . '">';
+ $OUT .= '<table border="0" cellspacing="0" cellpadding="0" class="timebox_table dashed">';
+ $OUT .= '<tr>';
- if (ereg('Y', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_YEARS--}</strong></td>\n";
- }
+ if (isInString('Y', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_YEARS--}</strong></td>';
+ } // END - if
- if (ereg('M', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_MONTHS--}</strong></td>\n";
- }
+ if (isInString('M', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_MONTHS--}</strong></td>';
+ } // END - if
- if (ereg("W", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_WEEKS--}</strong></td>\n";
- }
+ if (isInString('W', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_WEEKS--}</strong></td>';
+ } // END - if
- if (ereg("D", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_DAYS--}</strong></td>\n";
- }
+ if (isInString('D', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_DAYS--}</strong></td>';
+ } // END - if
- if (ereg("h", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_HOURS--}</strong></td>\n";
- }
+ if (isInString('h', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_HOURS--}</strong></td>';
+ } // END - if
- if (ereg('m', $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_MINUTES--}</strong></td>\n";
- }
+ if (isInString('m', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_MINUTES--}</strong></td>';
+ } // END - if
- if (ereg("s", $display) || (empty($display))) {
- $OUT .= " <td align=\"center\" class=\"admin_title bottom\"><div class=\"tiny\">{--_SECONDS--}</strong></td>\n";
- }
+ if (isInString('s', $display) || (empty($display))) {
+ $OUT .= '<td align="center" class="timebox_column bottom"><div class="tiny">{--_SECONDS--}</strong></td>';
+ } // END - if
- $OUT .= "</tr>\n";
- $OUT .= "<tr>\n";
+ $OUT .= '</tr>';
+ $OUT .= '<tr>';
- if (ereg('Y', $display) || (empty($display))) {
+ if (isInString('Y', $display) || (empty($display))) {
// Generate year selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ye\" size=\"1\">\n";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_ye" size="1">';
for ($idx = 0; $idx <= 10; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= '<option class="mini_select" value="' . $idx . '"';
if ($idx == $Y) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_ye\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_ye" value="0" />';
}
- if (ereg('M', $display) || (empty($display))) {
+ if (isInString('M', $display) || (empty($display))) {
// Generate month selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mo\" size=\"1\">\n";
- for ($idx = 0; $idx <= 11; $idx++)
- {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_mo" size="1">';
+ for ($idx = 0; $idx <= 11; $idx++) {
+ $OUT .= ' <option class="mini_select" value="' . $idx . '"';
if ($idx == $M) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_mo\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_mo" value="0" />';
}
- if (ereg("W", $display) || (empty($display))) {
+ if (isInString('W', $display) || (empty($display))) {
// Generate week selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_we\" size=\"1\">\n";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_we" size="1">';
for ($idx = 0; $idx <= 4; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= ' <option class="mini_select" value="' . $idx . '"';
if ($idx == $W) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_we\" value=\"0\" />\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_we" value="0" />';
}
- if (ereg("D", $display) || (empty($display))) {
+ if (isInString('D', $display) || (empty($display))) {
// Generate day selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_da\" size=\"1\">\n";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_da" size="1">';
for ($idx = 0; $idx <= 31; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= ' <option class="mini_select" value="' . $idx . '"';
if ($idx == $D) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_da\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_da" value="0" />';
}
- if (ereg("h", $display) || (empty($display))) {
+ if (isInString('h', $display) || (empty($display))) {
// Generate hour selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_ho\" size=\"1\">\n";
- for ($idx = 0; $idx <= 23; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_ho" size="1">';
+ for ($idx = 0; $idx <= 23; $idx++) {
+ $OUT .= ' <option class="mini_select" value="' . $idx . '"';
if ($idx == $h) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_ho\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_ho" value="0" />';
}
- if (ereg('m', $display) || (empty($display))) {
+ if (isInString('m', $display) || (empty($display))) {
// Generate minute selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_mi\" size=\"1\">\n";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_mi" size="1">';
for ($idx = 0; $idx <= 59; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= ' <option class="mini_select" value="' . $idx . '"';
if ($idx == $m) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_mi\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_mi" value="0" />';
}
- if (ereg("s", $display) || (empty($display))) {
+ if (isInString('s', $display) || (empty($display))) {
// Generate second selection
- $OUT .= " <td align=\"center\"><select class=\"mini_select\" name=\"" . $prefix."_se\" size=\"1\">\n";
+ $OUT .= '<td align="center"><select class="mini_select" name="' . $prefix . '_se" size="1">';
for ($idx = 0; $idx <= 59; $idx++) {
- $OUT .= " <option class=\"mini_select\" value=\"" . $idx."\"";
+ $OUT .= ' <option class="mini_select" value="' . $idx . '"';
if ($idx == $s) $OUT .= ' selected="selected"';
- $OUT .= ">" . $idx."</option>\n";
- }
- $OUT .= " </select></td>\n";
+ $OUT .= '>' . $idx . '</option>';
+ } // END - for
+ $OUT .= '</select></td>';
} else {
- $OUT .= "<INPUT type=\"hidden\" name=\"" . $prefix."_se\" value=\"0\">\n";
+ $OUT .= '<input type="hidden" name="' . $prefix . '_se" value="0" />';
}
- $OUT .= "</tr>\n";
- $OUT .= "</table>\n";
- $OUT .= "</div>\n";
- // Return generated HTML code
+ $OUT .= '</tr>';
+ $OUT .= '</table>';
+ $OUT .= '</div>';
}
+
+ // Return generated HTML code
return $OUT;
}
//
function createTimestampFromSelections ($prefix, $postData) {
// Initial return value
- $ret = 0;
+ $ret = '0';
// Do we have a leap year?
- $SWITCH = 0;
+ $SWITCH = '0';
$TEST = date('Y', time()) / 4;
$M1 = date('m', time());
+
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == "02") && ($postData[$prefix."_mo"] > "02")) $SWITCH = getConfig('ONE_DAY');
+ if ((floor($TEST) == $TEST) && ($M1 == '02') && ($postData[$prefix . '_mo'] > '02')) $SWITCH = getConfig('ONE_DAY');
+
// First add years...
- $ret += $postData[$prefix."_ye"] * (31536000 + $SWITCH);
+ $ret += $postData[$prefix . '_ye'] * (31536000 + $SWITCH);
+
// Next months...
- $ret += $postData[$prefix."_mo"] * 2628000;
+ $ret += $postData[$prefix . '_mo'] * 2628000;
+
// Next weeks
- $ret += $postData[$prefix."_we"] * 604800;
+ $ret += $postData[$prefix . '_we'] * 604800;
+
// Next days...
- $ret += $postData[$prefix."_da"] * 86400;
+ $ret += $postData[$prefix . '_da'] * 86400;
+
// Next hours...
- $ret += $postData[$prefix."_ho"] * 3600;
+ $ret += $postData[$prefix . '_ho'] * 3600;
+
// Next minutes..
- $ret += $postData[$prefix."_mi"] * 60;
+ $ret += $postData[$prefix . '_mi'] * 60;
+
// And at last seconds...
- $ret += $postData[$prefix."_se"];
+ $ret += $postData[$prefix . '_se'];
+
// Return calculated value
return $ret;
}
foreach($data as $k => $v) {
if ($v > 0) {
// Value is greater than 0 "eval" data to return string
- eval("\$ret .= \", \".\$v.\" {--_".strtoupper($k)."--}\";");
+ eval('$ret .= ", ".$v." {--_' . strtoupper($k) . '--}";');
break;
} // END - if
} // END - foreach
$ret = substr($ret, 2);
} else {
// Zero seconds
- $ret = "0 {--_SECONDS--}";
+ $ret = '0 {--_SECONDS--}';
}
// Return fancy time string
return $ret;
}
-// Generates a navigation row for listing emails
-function addEmailNavigation ($PAGES, $offset, $show_form, $colspan, $return=false) {
- $SEP = ''; $TOP = '';
- if ($show_form === false) {
- $TOP = " top2";
- $SEP = "<tr><td colspan=\"" . $colspan."\" class=\"seperator\"> </td></tr>";
- }
-
- $NAV = '';
- for ($page = 1; $page <= $PAGES; $page++) {
- // Is the page currently selected or shall we generate a link to it?
- if (($page == getRequestElement('page')) || ((!isGetRequestElementSet('page')) && ($page == '1'))) {
- // Is currently selected, so only highlight it
- $NAV .= '<strong>-';
- } else {
- // Open anchor tag and add base URL
- $NAV .= '<a href="{?URL?}/modules.php?module=admin&what=' . getWhat() . '&page=' . $page . '&offset=' . $offset;
-
- // Add userid when we shall show all mails from a single member
- if ((isGetRequestElementSet('userid')) && (bigintval(getRequestElement('userid')) > 0)) $NAV .= '&userid=' . bigintval(getRequestElement('userid'));
-
- // Close open anchor tag
- $NAV .= '">';
- }
- $NAV .= $page;
- if (($page == getRequestElement('page')) || ((!isGetRequestElementSet('page')) && ($page == '1'))) {
- // Is currently selected, so only highlight it
- $NAV .= '-</strong>';
- } else {
- // Close anchor tag
- $NAV .= '</a>';
- }
-
- // Add seperator if we have not yet reached total pages
- if ($page < $PAGES) $NAV .= ' | ';
- } // END - for
-
- // Define constants only once
- $content['nav'] = $NAV;
- $content['span'] = $colspan;
- $content['top'] = $TOP;
- $content['sep'] = $SEP;
-
- // Load navigation template
- $OUT = loadTemplate('admin_email_nav_row', true, $content);
-
- if ($return === true) {
- // Return generated HTML-Code
- return $OUT;
- } else {
- // Output HTML-Code
- outputHtml($OUT);
- }
-}
-
// Extract host from script name
function extractHostnameFromUrl (&$script) {
// Use default SERVER_URL by default... ;) So?
// Extract host name
$host = str_replace('http://', '', $url);
- if (ereg('/', $host)) $host = substr($host, 0, strpos($host, '/'));
+ if (isInString('/', $host)) $host = substr($host, 0, strpos($host, '/'));
// Generate relative URL
- //* DEBUG: */ print("SCRIPT=" . $script."<br />");
+ //* DEBUG: */ debugOutput('SCRIPT=' . $script);
if (substr(strtolower($script), 0, 7) == 'http://') {
// But only if http:// is in front!
$script = substr($script, (strlen($url) + 7));
- } elseif (substr(strtolower($script), 0, 8) == "https://") {
+ } elseif (substr(strtolower($script), 0, 8) == 'https://') {
// Does this work?!
$script = substr($script, (strlen($url) + 8));
}
- //* DEBUG: */ print("SCRIPT=" . $script."<br />");
+ //* DEBUG: */ debugOutput('SCRIPT=' . $script);
if (substr($script, 0, 1) == '/') $script = substr($script, 1);
// Return host name
}
// Send a GET request
-function sendGetRequest ($script) {
+function sendGetRequest ($script, $data = array()) {
// Extract host name from script
$host = extractHostnameFromUrl($script);
+ // Add data
+ $body = http_build_query($data, '', '&');
+
+ // Do we have a question-mark in the script?
+ if (strpos($script, '?') === false) {
+ // No, so first char must be question mark
+ $body = '?' . $body;
+ } else {
+ // Ok, add &
+ $body = '&' . $body;
+ }
+
+ // Add script data
+ $script .= $body;
+
+ // Remove trailed & to make it more conform
+ if (substr($script, -1, 1) == '&') $script = substr($script, 0, -1);
+
// Generate GET request header
$request = 'GET /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
$request .= 'Host: ' . $host . getConfig('HTTP_EOL');
} else {
$request .= 'User-Agent: ' . getConfig('TITLE') . '/' . getConfig('VERSION') . getConfig('HTTP_EOL');
}
- $request .= 'Content-Type: text/plain' . getConfig('HTTP_EOL');
- $request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
- $request .= 'Connection: Close' . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
+ $request .= 'Accept: image/png,image/*;q=0.8,text/plain,text/html,*/*;q=0.5' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
+ $request .= 'Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0' . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
// Send the raw request
$response = sendRawRequest($host, $request);
return array('', '', '');
} // END - if
- // Compile the script name
- $script = compileCode($script);
-
// Extract host name from script
$host = extractHostnameFromUrl($script);
- // Construct request
- $data = http_build_query($postData, '','&');
+ // Construct request body
+ $body = http_build_query($postData, '', '&');
// Generate POST request header
- $request = 'POST /' . trim($script) . ' HTTP/1.1' . getConfig('HTTP_EOL');
+ $request = 'POST /' . trim($script) . ' HTTP/1.0' . getConfig('HTTP_EOL');
$request .= 'Host: ' . $host . getConfig('HTTP_EOL');
$request .= 'Referer: ' . getConfig('URL') . '/admin.php' . getConfig('HTTP_EOL');
$request .= 'User-Agent: ' . getConfig('TITLE') . '/' . getConfig('FULL_VERSION') . getConfig('HTTP_EOL');
- $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
- $request .= 'Content-length: ' . strlen($data) . getConfig('HTTP_EOL');
+ $request .= 'Accept: text/plain;q=0.8' . getConfig('HTTP_EOL');
+ $request .= 'Accept-Charset: UTF-8,*' . getConfig('HTTP_EOL');
$request .= 'Cache-Control: no-cache' . getConfig('HTTP_EOL');
- $request .= 'Connection: Close' . getConfig('HTTP_EOL') . getConfig('HTTP_EOL');
- $request .= $data;
+ $request .= 'Content-Type: application/x-www-form-urlencoded' . getConfig('HTTP_EOL');
+ $request .= 'Content-Length: ' . strlen($body) . getConfig('HTTP_EOL');
+ $request .= 'Connection: close' . getConfig('HTTP_EOL');
+ $request .= getConfig('HTTP_EOL');
+
+ // Add body
+ $request .= $body;
// Send the raw request
$response = sendRawRequest($host, $request);
// Sends a raw request to another host
function sendRawRequest ($host, $request) {
// Init errno and errdesc with 'all fine' values
- $errno = 0; $errdesc = '';
+ $errno = '0'; $errdesc = '';
// Initialize array
$response = array('', '', '');
$useProxy = true;
} // END - if
+ // Load include
+ loadIncludeOnce('inc/classes/resolver.class.php');
+
+ // Get resolver instance
+ $resolver = new HostnameResolver();
+
// Open connection
- //* DEBUG: */ die("SCRIPT=" . $script."<br />");
+ //* DEBUG: */ die('SCRIPT=' . $script);
if ($useProxy === true) {
+ // Resolve hostname into IP address
+ $ip = $resolver->resolveHostname(compileRawCode(getConfig('proxy_host')));
+
// Connect to host through proxy connection
- $fp = @fsockopen(compileCode(getConfig('proxy_host')), bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
+ $fp = fsockopen($ip, bigintval(getConfig('proxy_port')), $errno, $errdesc, 30);
} else {
+ // Resolve hostname into IP address
+ $ip = $resolver->resolveHostname($host);
+
// Connect to host directly
- $fp = @fsockopen($host, 80, $errno, $errdesc, 30);
+ $fp = fsockopen($ip, 80, $errno, $errdesc, 30);
}
// Is there a link?
if (!is_resource($fp)) {
// Failed!
+ logDebugMessage(__FUNCTION__, __LINE__, $errdesc . ' (' . $errno . ')');
return $response;
- } // END - if
+ } elseif ((!stream_set_blocking($fp, 0)) || (!stream_set_timeout($fp, 1))) {
+ // Cannot set non-blocking mode or timeout
+ logDebugMessage(__FUNCTION__, __LINE__, socket_strerror(socket_last_error()));
+ return $response;
+ }
// Do we use proxy?
if ($useProxy === true) {
- // Generate CONNECT request header
- $proxyTunnel = "CONNECT " . $host . ":80 HTTP/1.1" . getConfig('HTTP_EOL');
- $proxyTunnel .= "Host: " . $host . getConfig('HTTP_EOL');
-
- // Use login data to proxy? (username at least!)
- if (getConfig('proxy_username') != '') {
- // Add it as well
- $encodedAuth = base64_encode(compileCode(getConfig('proxy_username')) . getConfig('ENCRYPT_SEPERATOR') . compileCode(getConfig('proxy_password')));
- $proxyTunnel .= "Proxy-Authorization: Basic " . $encodedAuth . getConfig('HTTP_EOL');
- } // END - if
+ // Setup proxy tunnel
+ $response = setupProxyTunnel($host, $fp);
- // Add last new-line
- $proxyTunnel .= getConfig('HTTP_EOL');
- //* DEBUG: */ print("<strong>proxyTunnel=</strong><pre>" . $proxyTunnel."</pre>");
-
- // Write request
- fputs($fp, $proxyTunnel);
-
- // Got response?
- if (feof($fp)) {
- // No response received
- return $response;
- } // END - if
-
- // Read the first line
- $resp = trim(fgets($fp, 10240));
- $respArray = explode(' ', $resp);
- if ((strtolower($respArray[0]) !== 'http/1.0') || ($respArray[1] != '200')) {
+ // If the response is invalid, abort
+ if ((count($response) == 3) && (empty($response[0])) && (empty($response[1])) && (empty($response[2]))) {
// Invalid response!
+ logDebugMessage(__FUNCTION__, __LINE__, 'Proxy tunnel not working?');
return $response;
} // END - if
} // END - if
// Write request
- fputs($fp, $request);
+ fwrite($fp, $request);
+
+ // Start counting
+ $start = microtime(true);
// Read response
while (!feof($fp)) {
- $response[] = trim(fgets($fp, 1024));
+ // Get info from stream
+ $info = stream_get_meta_data($fp);
+
+ // Is it timed out? 15 seconds is a really patient...
+ if (($info['timed_out'] == true) || (microtime(true) - $start) > 15) {
+ // Timeout
+ logDebugMessage(__FUNCTION__, __LINE__, 'Timed out to get data from host ' . $host);
+
+ // Abort here
+ break;
+ } // END - if
+
+ // Get line from stream
+ $line = fgets($fp, 128);
+
+ // Ignore empty lines because of non-blocking mode
+ if (empty($line)) {
+ // uslepp a little to avoid 100% CPU load
+ usleep(10);
+
+ // Skip this
+ continue;
+ } // END - if
+
+ // Add it to response
+ $response[] = trim($line);
} // END - while
// Close socket
fclose($fp);
+ // Time request if debug-mode is enabled
+ if (isDebugModeEnabled()) {
+ // Add debug message...
+ logDebugMessage(__FUNCTION__, __LINE__, 'Request took ' . (microtime(true) - $start) . ' seconds and returned ' . count($response) . ' line(s).');
+ } // END - if
+
// Skip first empty lines
$resp = $response;
foreach ($resp as $idx => $line) {
}
} // END - foreach
- //* DEBUG: */ print("<strong>Response:</strong><pre>".print_r($response, true)."</pre>");
+ //* DEBUG: */ debugOutput('<strong>Request:</strong><pre>'.print_r($request, true).'</pre>');
+ //* DEBUG: */ debugOutput('<strong>Response:</strong><pre>'.print_r($response, true).'</pre>');
- // Proxy agent found?
- if ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
+ // Proxy agent found or something went wrong?
+ if (!isset($response[0])) {
+ // No response, maybe timeout
+ $response = array('', '', '');
+ logDebugMessage(__FUNCTION__, __LINE__, 'Invalid empty response array, maybe timed out?');
+ } elseif ((substr(strtolower($response[0]), 0, 11) == 'proxy-agent') && ($useProxy === true)) {
// Proxy header detected, so remove two lines
array_shift($response);
array_shift($response);
} // END - if
// Was the request successfull?
- if ((!eregi('200 OK', $response[0])) || (empty($response[0]))) {
+ if ((!isInStringIgnoreCase('200 OK', $response[0])) || (empty($response[0]))) {
// Not found / access forbidden
+ logDebugMessage(__FUNCTION__, __LINE__, 'Unexpected status code ' . $response[0] . ' detected. "200 OK" was expected.');
$response = array('', '', '');
} // END - if
return $response;
}
-// Taken from www.php.net eregi() user comments
-function isEmailValid ($email) {
- // Compile email
- $email = compileCode($email);
+// Sets up a proxy tunnel for given hostname and through resource
+function setupProxyTunnel ($host, $resource) {
+ // Initialize array
+ $response = array('', '', '');
+
+ // Generate CONNECT request header
+ $proxyTunnel = 'CONNECT ' . $host . ':80 HTTP/1.0' . getConfig('HTTP_EOL');
+ $proxyTunnel .= 'Host: ' . $host . getConfig('HTTP_EOL');
+
+ // Use login data to proxy? (username at least!)
+ if (getConfig('proxy_username') != '') {
+ // Add it as well
+ $encodedAuth = base64_encode(compileRawCode(getConfig('proxy_username')) . ':' . compileRawCode(getConfig('proxy_password')));
+ $proxyTunnel .= 'Proxy-Authorization: Basic ' . $encodedAuth . getConfig('HTTP_EOL');
+ } // END - if
+
+ // Add last new-line
+ $proxyTunnel .= getConfig('HTTP_EOL');
+ //* DEBUG: */ debugOutput('<strong>proxyTunnel=</strong><pre>' . $proxyTunnel.'</pre>');
+ // Write request
+ fwrite($fp, $proxyTunnel);
+
+ // Got response?
+ if (feof($fp)) {
+ // No response received
+ return $response;
+ } // END - if
+
+ // Read the first line
+ $resp = trim(fgets($fp, 10240));
+ $respArray = explode(' ', $resp);
+ if ((strtolower($respArray[0]) !== 'http/1.0') || ($respArray[1] != '200')) {
+ // Invalid response!
+ return $response;
+ } // END - if
+
+ // All fine!
+ return $respArray;
+}
+
+// Taken from www.php.net isInStringIgnoreCase() user comments
+function isEmailValid ($email) {
// Check first part of email address
$first = '[-a-z0-9!#$%&\'*+/=?^_<{|}~]+(\.[-a-zA-Z0-9!#$%&\'*+/=?^_<{|}~]+)*';
return preg_match($regex, $email);
}
-// Function taken from user comments on www.php.net / function eregi()
+// Function taken from user comments on www.php.net / function isInStringIgnoreCase()
function isUrlValid ($URL, $compile=true) {
// Trim URL a little
$URL = trim(urldecode($URL));
- //* DEBUG: */ outputHtml($URL."<br />");
+ //* DEBUG: */ debugOutput($URL);
// Compile some chars out...
if ($compile === true) $URL = compileUriCode($URL, false, false, false);
- //* DEBUG: */ outputHtml($URL."<br />");
+ //* DEBUG: */ debugOutput($URL);
// Check for the extension filter
if (isExtensionActive('filter')) {
// Generate a list of administrative links to a given userid
function generateMemberAdminActionLinks ($userid, $status = '') {
// Make sure userid is a number
- if ($userid != bigintval($userid)) debug_report_bug('userid is not a number!');
+ if ($userid != bigintval($userid)) debug_report_bug(__FUNCTION__, __LINE__, 'userid is not a number!');
// Define all main targets
$targetArray = array('del_user', 'edit_user', 'lock_user', 'add_points', 'sub_points');
// Begin of navigation links
- $OUT = "[ ";
+ $OUT = '[';
foreach ($targetArray as $tar) {
- $OUT .= "<span class=\"admin_user_link\"><a href=\"{?URL?}/modules.php?module=admin&what=" . $tar . "&userid=" . $userid . "\" title=\"{--ADMIN_LINK_";
- //* DEBUG: */ outputHtml("*" . $tar.'/' . $status."*<br />");
+ $OUT .= '<span class="admin_user_link"><a href="{%url=modules.php?module=admin&what=' . $tar . '&userid=' . $userid . '%}" title="{--ADMIN_LINK_';
+ //* DEBUG: */ debugOutput('*' . $tar.'/' . $status.'*');
if (($tar == 'lock_user') && ($status == 'LOCKED')) {
// Locked accounts shall be unlocked
$OUT .= 'UNLOCK_USER';
// All other status is fine
$OUT .= strtoupper($tar);
}
- $OUT .= "_TITLE--}\">{--ADMIN_";
+ $OUT .= '_TITLE--}">{--ADMIN_';
if (($tar == 'lock_user') && ($status == 'LOCKED')) {
// Locked accounts shall be unlocked
$OUT .= 'UNLOCK_USER';
// All other status is fine
$OUT .= strtoupper($tar);
}
- $OUT .= "--}</a></span> | ";
+ $OUT .= '--}</a></span>|';
}
// Finish navigation link
if ((isExtensionActive('admins')) && ($table == 'admins')) {
// Create email link for contacting admin in guest area
$EMAIL = generateAdminEmailLink($email);
- } elseif ((isExtensionActive('user')) && (getExtensionVersion('user') >= '0.3.3') && ($table == 'user_data')) {
+ } elseif ((isExtensionInstalledAndNewer('user', '0.3.3')) && ($table == 'user_data')) {
// Create email link for contacting a member within admin area (or later in other areas, too?)
$EMAIL = generateUserEmailLink($email, 'admin');
} elseif ((isExtensionActive('sponsor')) && ($table == 'sponsor_data')) {
}
// Generate a hash for extra-security for all passwords
-function generateHash ($plainText, $salt = '') {
+function generateHash ($plainText, $salt = '', $hash = true) {
+ // Debug output
+ //* DEBUG: */ debugOutput('plainText=' . $plainText . ',salt=' . $salt . ',hash='.intval($hash));
+
// Is the required extension 'sql_patches' there and a salt is not given?
- if (((isExtensionInstalledAndOlder('sql_patches', '0.3.6')) || (!isExtensionActive('sql_patches'))) && (empty($salt))) {
+ // 0123 4 43 3 4 432 2 3 32 2 3 3210
+ if ((((isExtensionInstalledAndOlder('sql_patches', '0.3.6')) && (empty($salt))) || (!isExtensionActive('sql_patches')) || (!isExtensionInstalledAndNewer('other', '0.2.5')))) {
// Extension sql_patches is missing/outdated so we hash the plain text with MD5
- return md5($plainText);
+ if ($hash === true) {
+ // Is plain password
+ return md5($plainText);
+ } else {
+ // Is already a hash
+ return $plainText;
+ }
} // END - if
// Do we miss an arry element here?
if (!isConfigEntrySet('file_hash')) {
// Stop here
- debug_report_bug('Missing file_hash in ' . __FUNCTION__ . '.');
+ debug_report_bug(__FUNCTION__, __LINE__, 'Missing file_hash in ' . __FUNCTION__ . '.');
} // END - if
// When the salt is empty build a new one, else use the first x configured characters as the salt
if (empty($salt)) {
- // Build server string (inc/databases.php is no longer updated with every commit)
+ // Build server string for more entropy
$server = $_SERVER['PHP_SELF'] . getConfig('ENCRYPT_SEPERATOR') . detectUserAgent() . getConfig('ENCRYPT_SEPERATOR') . getenv('SERVER_SOFTWARE') . getConfig('ENCRYPT_SEPERATOR') . detectRemoteAddr();
// Build key string
// Generate SHA1 sum from modula of number and the prime number
$sha1 = sha1(($a % getConfig('_PRIME')) . $server . getConfig('ENCRYPT_SEPERATOR') . $keys . getConfig('ENCRYPT_SEPERATOR') . $data . getConfig('ENCRYPT_SEPERATOR') . getConfig('DATE_KEY') . getConfig('ENCRYPT_SEPERATOR') . $a);
- //* DEBUG: */ outputHtml("SHA1=" . $sha1." (".strlen($sha1).")<br />");
+ //* DEBUG: */ debugOutput('SHA1=' . $sha1.' ('.strlen($sha1).')<br />');
$sha1 = scrambleString($sha1);
- //* DEBUG: */ outputHtml("Scrambled=" . $sha1." (".strlen($sha1).")<br />");
+ //* DEBUG: */ debugOutput('Scrambled=' . $sha1.' ('.strlen($sha1).')<br />');
//* DEBUG: */ $sha1b = descrambleString($sha1);
- //* DEBUG: */ outputHtml("Descrambled=" . $sha1b." (".strlen($sha1b).")<br />");
+ //* DEBUG: */ debugOutput('Descrambled=' . $sha1b.' ('.strlen($sha1b).')<br />');
// Generate the password salt string
$salt = substr($sha1, 0, getConfig('salt_length'));
- //* DEBUG: */ outputHtml($salt." (".strlen($salt).")<br />");
+ //* DEBUG: */ debugOutput($salt.' ('.strlen($salt).')<br />');
} else {
// Use given salt
+ //* DEBUG: */ debugOutput('salt=' . $salt);
$salt = substr($salt, 0, getConfig('salt_length'));
- //* DEBUG: */ outputHtml("GIVEN={$salt}<br />");
+ //* DEBUG: */ debugOutput('salt=' . $salt . '(' . strlen($salt) . '/' . getConfig('salt_length') . ')<br />');
+
+ // Sanity check on salt
+ if (strlen($salt) != getConfig('salt_length')) {
+ // Not the same!
+ debug_report_bug(__FUNCTION__.': salt length mismatch! ('.strlen($salt).'/'.getConfig('salt_length').')');
+ } // END - if
}
+ // Generate final hash (for debug output)
+ $finalHash = $salt . sha1($salt . $plainText);
+
+ // Debug output
+ //* DEBUG: */ debugOutput('finalHash=' . $finalHash);
+
// Return hash
- return $salt.sha1($salt . $plainText);
+ return $finalHash;
}
// Scramble a string
$scrambleNums = explode(':', genScrambleString(strlen($str)));
}
+ // Compare both lengths and abort if different
+ if (strlen($str) != count($scrambleNums)) return $str;
+
// Scramble string here
- //* DEBUG: */ outputHtml("***Original=" . $str."***<br />");
+ //* DEBUG: */ debugOutput('***Original=' . $str.'***<br />');
for ($idx = 0; $idx < strlen($str); $idx++) {
// Get char on scrambled position
$char = substr($str, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ outputHtml("***Scrambled=" . $scrambled."***<br />");
+ //* DEBUG: */ debugOutput('***Scrambled=' . $scrambled.'***<br />');
return $scrambled;
}
// Begin descrambling
$orig = str_repeat(' ', 40);
- //* DEBUG: */ outputHtml("+++Scrambled=" . $str."+++<br />");
+ //* DEBUG: */ debugOutput('+++Scrambled=' . $str.'+++<br />');
for ($idx = 0; $idx < 40; $idx++) {
$char = substr($str, $idx, 1);
$orig = substr_replace($orig, $char, $scrambleNums[$idx], 1);
} // END - for
// Return scrambled string
- //* DEBUG: */ outputHtml("+++Original=" . $orig."+++<br />");
+ //* DEBUG: */ debugOutput('+++Original=' . $orig.'+++<br />');
return $orig;
}
}
// Generate an PGP-like encrypted hash of given hash for e.g. cookies
-function generatePassString ($passHash) {
+function encodeHashForCookie ($passHash) {
// Return vanilla password hash
$ret = $passHash;
// Is a secret key and master salt already initialized?
- if ((isExtensionInstalled('sql_patches')) && (isConfigEntrySet('secret_key')) && (isConfigEntrySet('master_salt'))) {
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, intval(isExtensionInstalled('sql_patches')) . '/' . intval(isConfigEntrySet('_PRIME')) . '/' . intval(isConfigEntrySet('secret_key')) . '/' . intval(isConfigEntrySet('master_salt')));
+ if ((isExtensionInstalled('sql_patches')) && (isConfigEntrySet('_PRIME')) && (isConfigEntrySet('secret_key')) && (isConfigEntrySet('master_salt'))) {
// Only calculate when the secret key is generated
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '/' . strlen(getConfig('secret_key')));
+ if ((strlen($passHash) != 49) || (strlen(getConfig('secret_key')) != 40)) {
+ // Both keys must have same length so return unencrypted
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '!=49/' . strlen(getConfig('secret_key')) . '!=40');
+ return $ret;
+ } // END - if
+
$newHash = ''; $start = 9;
- for ($idx = 0; $idx < 10; $idx++) {
- $part1 = hexdec(substr($passHash, $start, 4));
- $part2 = hexdec(substr(getConfig('secret_key'), $start, 4));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'passHash=' . $passHash . '(' . strlen($passHash) . ')');
+ for ($idx = 0; $idx < 20; $idx++) {
+ $part1 = hexdec(substr($passHash, ($idx * 2) + (strlen($passHash) - strlen(getConfig('secret_key'))), 2));
+ $part2 = hexdec(substr(getConfig('secret_key'), $start, 2));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2);
$mod = dechex($idx);
if ($part1 > $part2) {
$mod = dechex(sqrt(($part1 - $part2) * getConfig('_PRIME') / pi()));
} elseif ($part2 > $part1) {
$mod = dechex(sqrt(($part2 - $part1) * getConfig('_PRIME') / pi()));
}
- $mod = substr(round($mod), 0, 4);
- $mod = str_repeat('0', 4-strlen($mod)) . $mod;
- //* DEBUG: */ outputHtml("*" . $start.'=' . $mod."*<br />");
- $start += 4;
+ $mod = substr($mod, 0, 2);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2 . '/mod=' . $mod . '(' . strlen($mod) . ')');
+ $mod = str_repeat(0, (2 - strlen($mod))) . $mod;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'mod(' . ($idx * 2) . ')=' . $mod . '*');
+ $start += 2;
$newHash .= $mod;
} // END - for
- //* DEBUG: */ print($passHash."<br />" . $newHash." (".strlen($newHash).')');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, $passHash . ',' . $newHash . ' (' . strlen($newHash) . ')');
$ret = generateHash($newHash, getConfig('master_salt'));
- //* DEBUG: */ print($ret."<br />");
- } else {
- // Hash it simple
- //* DEBUG: */ outputHtml("--" . $passHash."--<br />");
- $ret = md5($passHash);
- //* DEBUG: */ outputHtml("++" . $ret."++<br />");
- }
+ } // END - if
// Return result
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'ret=' . $ret . '');
return $ret;
}
// Make sure, that the script realy realy diese here and now
$GLOBALS['app_died'] = true;
+ // Set content type as text/html
+ setContentType('text/html');
+
// Load header
loadIncludeOnce('inc/header.php');
// Rewrite message for output
- $message = sprintf(getMessage('MXCHANGE_HAS_DIED'), basename($F), $L, $message);
-
- // Better log this message away
- logDebugMessage($F, $L, $message);
+ $message = sprintf(getMessage('MAILER_HAS_DIED'), basename($F), $L, $message);
// Load the message template
- loadTemplate('admin_settings_saved', false, $message);
+ loadTemplate('app_die_message', false, $message);
// Load footer
loadIncludeOnce('inc/footer.php');
} else {
// Script tried to kill itself twice
- debug_report_bug('Script wanted to kill itself more than once! Raw message=' . $message . ', file/function=' . $F . ', line=' . $L);
+ die('['.__FUNCTION__.':'.__LINE__.']: Script wanted to kill itself more than once! Raw message=' . $message . ', file/function=' . $F . ', line=' . $L);
}
}
// Display parsing time and number of SQL queries in footer
-function displayParsingTime() {
+function displayParsingTime () {
// Is the timer started?
if (!isset($GLOBALS['startTime'])) {
// Abort here
$start = explode(' ', $GLOBALS['startTime']);
$end = explode(' ', $endTime);
$runTime = $end[0] - $start[0];
- if ($runTime < 0) $runTime = 0;
+ if ($runTime < 0) $runTime = '0';
// Prepare output
+ // @TODO This can be easily moved out after the merge from EL branch to this is complete
$content = array(
- 'runtime' => translateComma($runTime),
- 'timeSQLs' => translateComma(getConfig('sql_time') * 1000),
+ 'run_time' => $runTime,
+ 'sql_time' => translateComma(getConfig('sql_time') * 1000),
);
// Load the template
- loadTemplate('show_timings', false, $content);
+ $GLOBALS['page_footer'] .= loadTemplate('show_timings', true, $content);
}
// Check wether a boolean constant is set
// In cache?
if (isset($GLOBALS['cache_array']['const'][$constName])) {
// Use cache
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-CACHE!<br />");
+ //* DEBUG: */ debugOutput(__FUNCTION__ . '(<font color="#0000aa">' . __LINE__ . '</font>): ' . $constName."-CACHE!<br />");
$res = ($GLOBALS['cache_array']['const'][$constName] === true);
} else {
// Check constant
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-RESOLVE!<br />");
+ //* DEBUG: */ debugOutput(__FUNCTION__ . '(<font color="#0000aa">' . __LINE__ . '</font>): ' . $constName."-RESOLVE!<br />");
if (defined($constName)) {
// Found!
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): " . $constName."-FOUND!<br />");
+ //* DEBUG: */ debugOutput(__FUNCTION__ . '(<font color="#0000aa">' . __LINE__ . '</font>): ' . $constName."-FOUND!<br />");
$res = (constant($constName) === true);
} // END - if
// The default theme is 'default'... ;-)
$ret = 'default';
- // Load default theme if not empty from configuration
- if (getConfig('default_theme') != '') $ret = getConfig('default_theme');
-
- if (!isSessionVariableSet('mxchange_theme')) {
- // Set default theme
- setTheme($ret);
- } elseif ((isSessionVariableSet('mxchange_theme')) && (isExtensionInstalledAndNewer('sql_patches', '0.1.4'))) {
- //die("<pre>".print_r($GLOBALS['cache_array']['themes'], true)."</pre>");
- // Get theme from cookie
- $ret = getSession('mxchange_theme');
-
- // Is it valid?
- if (getThemeId($ret) == 0) {
- // Fix it to default
- $ret = 'default';
- } // END - if
- } elseif ((!isInstalled()) && ((isInstalling()) || (getOutputMode() == true)) && ((isGetRequestElementSet('theme')) || (isPostRequestElementSet('theme')))) {
- // Prepare FQFN for checking
- $theme = sprintf("%stheme/%s/theme.php", getConfig('PATH'), getRequestElement('theme'));
-
- // Installation mode active
- if ((isGetRequestElementSet('theme')) && (isFileReadable($theme))) {
- // Set cookie from URL data
- setTheme(getRequestElement('theme'));
- } elseif (isFileReadable(sprintf("%stheme/%s/theme.php", getConfig('PATH'), SQL_ESCAPE(postRequestElement('theme'))))) {
- // Set cookie from posted data
- setTheme(SQL_ESCAPE(postRequestElement('theme')));
- }
-
- // Set return value
- $ret = getSession('mxchange_theme');
- } else {
- // Invalid design, reset cookie
- setTheme($ret);
- }
+ // Do we have ext-theme installed and active?
+ if (isExtensionActive('theme')) {
+ // Call inner method
+ $ret = getActualTheme();
+ } // END - if
// Return theme value
return $ret;
}
-// Setter for theme in session
-function setTheme ($newTheme) {
- setSession('mxchange_theme', $newTheme);
-}
-
-// Get id from theme
-// @TODO Try to move this to inc/libs/theme_functions.php
-function getThemeId ($name) {
- // Is the extension 'theme' installed?
- if (!isExtensionActive('theme')) {
- // Then abort here
- return 0;
- } // END - if
-
- // Default id
- $id = 0;
-
- // Is the cache entry there?
- if (isset($GLOBALS['cache_array']['themes']['id'][$name])) {
- // Get the version from cache
- $id = $GLOBALS['cache_array']['themes']['id'][$name];
-
- // Count up
- incrementStatsEntry('cache_hits');
- } elseif (getExtensionVersion('cache') != '0.1.8') {
- // Check if current theme is already imported or not
- $result = SQL_QUERY_ESC("SELECT `id` FROM `{?_MYSQL_PREFIX?}_themes` WHERE `theme_path`='%s' LIMIT 1",
- array($name), __FUNCTION__, __LINE__);
-
- // Entry found?
- if (SQL_NUMROWS($result) == 1) {
- // Fetch data
- list($id) = SQL_FETCHROW($result);
- } // END - if
-
- // Free result
- SQL_FREERESULT($result);
- }
-
- // Return id
- return $id;
-}
-
// Generates an error code from given account status
-function generateErrorCodeFromUserStatus ($status) {
- // @TODO The status should never be empty
- if (empty($status)) {
- // Something really bad happend here
- debug_report_bug(__FUNCTION__ . ': status is empty.');
+function generateErrorCodeFromUserStatus ($status='') {
+ // If no status is provided, use the default, cached
+ if ((empty($status)) && (isMember())) {
+ // Get user status
+ $status = getUserData('status');
} // END - if
// Default error code if unknown account status
$errorCode = getCode('UNKNOWN_STATUS');
// Generate constant name
- $constantName = sprintf("ID_%s", $status);
+ $codeName = sprintf("ACCOUNT_%s", strtoupper($status));
// Is the constant there?
- if (isCodeSet($constantName)) {
+ if (isCodeSet($codeName)) {
// Then get it!
- $errorCode = getCode($constantName);
+ $errorCode = getCode($codeName);
} else {
// Unknown status
logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown error status %s detected.", $status));
return $errorCode;
}
-// Function to search for the last modifified file
-function searchDirsRecursive ($dir, &$last_changed) {
- // Get dir as array
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):dir=" . $dir."<br />");
- // Does it match what we are looking for? (We skip a lot files already!)
- // RegexPattern to exclude ., .., .revision, .svn, debug.log or .cache in the filenames
- $excludePattern = '@(\.revision|debug\.log|\.cache|config\.php)$@';
- $ds = getArrayFromDirectory($dir, '', true, false, array(), '.php', $excludePattern);
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):ds[]=".count($ds)."<br />");
-
- // Walk through all entries
- foreach ($ds as $d) {
- // Generate proper FQFN
- $FQFN = str_replace('//', '/', getConfig('PATH') . $dir. '/'. $d);
-
- // Is it a file and readable?
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):FQFN={$FQFN}<br />");
- if (isDirectory($FQFN)) {
- // $FQFN is a directory so also crawl into this directory
- $newDir = $d;
- if (!empty($dir)) $newDir = $dir . '/'. $d;
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):DESCENT: " . $newDir."<br />");
- searchDirsRecursive($newDir, $last_changed);
- } elseif (isFileReadable($FQFN)) {
- // $FQFN is a filename and no directory
- $time = filemtime($FQFN);
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):File: " . $d." found. (".($last_changed['time'] - $time).")<br />");
- if ($last_changed['time'] < $time) {
- // This file is newer as the file before
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>) - NEWER!<br />");
- $last_changed['path_name'] = $FQFN;
- $last_changed['time'] = $time;
- } // END - if
- }
- } // END - foreach
-}
-
-// "Getter" for revision/version data
-function getActualVersion ($type = 'Revision') {
- // By default nothing is new... ;-)
- $new = false;
-
- // Is the cache entry there?
- if (isset($GLOBALS['cache_array']['revision'][$type])) {
- // Found so increase cache hit
- incrementStatsEntry('cache_hits');
-
- // Return it
- return $GLOBALS['cache_array']['revision'][$type][0];
- } else {
- // FQFN of revision file
- $FQFN = sprintf("%s/.revision", getConfig('CACHE_PATH'));
-
- // Check if 'check_revision_data' is setted (switch for manually rewrite the .revision-File)
- if ((isGetRequestElementSet('check_revision_data')) && (getRequestElement('check_revision_data') == 'yes')) {
- // Forced rebuild of .revision file
- $new = true;
- } else {
- // Check for revision file
- if (!isFileReadable($FQFN)) {
- // Not found, so we need to create it
- $new = true;
- } else {
- // Revision file found
- $ins_vers = explode("\n", readFromFile($FQFN));
-
- // Get array for mapping information
- $mapper = array_flip(getSearchFor());
- //* DEBUG: */ print('<pre>mapper='.print_r($mapper, true).'</pre>ins_vers=<pre>'.print_r($ins_vers, true).'</pre>');
-
- // Is the content valid?
- if ((!is_array($ins_vers)) || (count($ins_vers) <= 0) || (!isset($ins_vers[$mapper[$type]])) || (trim($ins_vers[$mapper[$type]]) == '') || ($ins_vers[0]) == 'new') {
- // File needs update!
- $new = true;
- } else {
- // Generate fake cache entry
- foreach ($mapper as $map=>$idx) {
- $GLOBALS['cache_array']['revision'][$map][0] = $ins_vers[$idx];
- } // END - foreach
-
- // Return found value
- return trim($ins_vers[$mapper[$type]]);
- }
- }
- }
-
- // Has it been updated?
- if ($new === true) {
- // Write it
- writeToFile($FQFN, implode("\n", getArrayFromActualVersion()));
-
- // ... and call recursive
- return getActualVersion($type);
- } // END - if
- }
-}
-
-// Repares an array we are looking for
-// The returned Array is needed twice (in getArrayFromActualVersion() and in getActualVersion() in the old .revision-fallback) so I puted it in an extra function to not polute the global namespace
-function getSearchFor () {
- // Add Revision, Date, Tag and Author
- $searchFor = array('Revision', 'Date', 'Tag', 'Author', 'File');
-
- // Return the created array
- return $searchFor;
-}
-
-// @TODO Please describe this function
-function getArrayFromActualVersion () {
- // Init variables
- $next_dir = '';
-
- // Directory to start with search
- $last_changed = array(
- 'path_name' => '',
- 'time' => 0
- );
-
- // Init return array
- $akt_vers = array();
-
- // Init value for counting the founded keywords
- $res = 0;
-
- // Searches all Files and there date of the last modifikation and puts the newest File in $last_changed.
- searchDirsRecursive($next_dir, $last_changed); // @TODO small change to API to $last_changed = searchDirsRecursive($next_dir, $time);
-
- // Get file
- $last_file = readFromFile($last_changed['path_name']);
-
- // Get all the keywords to search for
- $searchFor = getSearchFor();
+// Back-ported from the new ship-simu engine. :-)
+function debug_get_printable_backtrace () {
+ // Init variable
+ $backtrace = '<ol>';
- // This foreach loops the $searchFor-Tags (array('Revision', 'Date', 'Tag', 'Author') --> could easaly extended in the future)
- foreach ($searchFor as $search) {
- // Searches for "$search-tag:VALUE$" or "$search-tag::VALUE$"(the stylish keywordversion ;-)) in the lates modified file
- $res += preg_match('@\$' . $search.'(:|::) (.*) \$@U', $last_file, $t);
- // This trimms the search-result and puts it in the $GLOBALS['cache_array']['revision']-return array
- if (isset($t[2])) $GLOBALS['cache_array']['revision'][$search] = trim($t[2]);
+ // Get and prepare backtrace for output
+ $backtraceArray = debug_backtrace();
+ foreach ($backtraceArray as $key => $trace) {
+ if (!isset($trace['file'])) $trace['file'] = __FUNCTION__;
+ if (!isset($trace['line'])) $trace['line'] = __LINE__;
+ if (!isset($trace['args'])) $trace['args'] = array();
+ $backtrace .= '<li class="debug_list"><span class="backtrace_file">' . basename($trace['file']) . '</span>:' . $trace['line'].", <span class=\"backtrace_function\">" . $trace['function'] . '(' . count($trace['args']) . ')</span></li>';
} // END - foreach
- // Save the last-changed filename for debugging
- $GLOBALS['cache_array']['revision']['File'] = $last_changed['path_name'];
-
- // at least 3 keyword-Tags are needed for propper values
- if ($res && $res >= 3
- && isset($GLOBALS['cache_array']['revision']['Revision']) && $GLOBALS['cache_array']['revision']['Revision'] != ''
- && isset($GLOBALS['cache_array']['revision']['Date']) && $GLOBALS['cache_array']['revision']['Date'] != ''
- && isset($GLOBALS['cache_array']['revision']['Tag']) && $GLOBALS['cache_array']['revision']['Tag'] != '') {
- // Prepare content witch need special treadment
-
- // Prepare timestamp for date
- preg_match('@(....)-(..)-(..) (..):(..):(..)@', $GLOBALS['cache_array']['revision']['Date'], $match_d);
- $GLOBALS['cache_array']['revision']['Date'] = mktime($match_d[4], $match_d[5], $match_d[6], $match_d[2], $match_d[3], $match_d[1]);
-
- // Add author to the Tag if the author is set and is not quix0r (lead coder)
- if ((isset($GLOBALS['cache_array']['revision']['Author'])) && ($GLOBALS['cache_array']['revision']['Author'] != 'quix0r')) {
- $GLOBALS['cache_array']['revision']['Tag'] .= '-'.strtoupper($GLOBALS['cache_array']['revision']['Author']);
- } // END - if
-
- } else {
- // No valid Data from the last modificated file so read the Revision from the Server. Fallback-solution!! Should not be removed I think.
- $version = sendGetRequest('check-updates3.php');
-
- // Prepare content
- // Only sets not setted or not proper values to the Online-Server-Fallback-Solution
- if (!isset($GLOBALS['cache_array']['revision']['Revision']) || $GLOBALS['cache_array']['revision']['Revision'] == '') $GLOBALS['cache_array']['revision']['Revision'] = trim($version[10]);
- if (!isset($GLOBALS['cache_array']['revision']['Date']) || $GLOBALS['cache_array']['revision']['Date'] == '') $GLOBALS['cache_array']['revision']['Date'] = trim($version[9]);
- if (!isset($GLOBALS['cache_array']['revision']['Tag']) || $GLOBALS['cache_array']['revision']['Tag'] == '') $GLOBALS['cache_array']['revision']['Tag'] = trim($version[8]);
- if (!isset($GLOBALS['cache_array']['revision']['Author']) || $GLOBALS['cache_array']['revision']['Author'] == '') $GLOBALS['cache_array']['revision']['Author'] = 'quix0r';
- if (!isset($GLOBALS['cache_array']['revision']['File']) || $GLOBALS['cache_array']['revision']['File'] == '') $GLOBALS['cache_array']['revision']['File'] = trim($version[11]);
- }
+ // Close it
+ $backtrace .= '</ol>';
- // Return prepared array
- return $GLOBALS['cache_array']['revision'];
+ // Return the backtrace
+ return $backtrace;
}
-// Back-ported from the new ship-simu engine. :-)
-function debug_get_printable_backtrace () {
+// A mail-able backtrace
+function debug_get_mailable_backtrace () {
// Init variable
- $backtrace = "<ol>\n";
+ $backtrace = '';
// Get and prepare backtrace for output
$backtraceArray = debug_backtrace();
if (!isset($trace['file'])) $trace['file'] = __FUNCTION__;
if (!isset($trace['line'])) $trace['line'] = __LINE__;
if (!isset($trace['args'])) $trace['args'] = array();
- $backtrace .= "<li class=\"debug_list\"><span class=\"backtrace_file\">".basename($trace['file'])."</span>:" . $trace['line'].", <span class=\"backtrace_function\">" . $trace['function'].'('.count($trace['args']).")</span></li>\n";
+ $backtrace .= ($key+1) . '.:' . basename($trace['file']) . ':' . $trace['line'] . ', ' . $trace['function'] . '(' . count($trace['args']) . ")\n";
} // END - foreach
- // Close it
- $backtrace .= "</ol>\n";
-
// Return the backtrace
return $backtrace;
}
// Output a debug backtrace to the user
-function debug_report_bug ($message = '') {
+function debug_report_bug ($F, $L, $message = '', $sendEmail = true) {
+ // Is this already called?
+ if (isset($GLOBALS[__FUNCTION__])) {
+ // Other backtrace
+ print 'Message:'.$message.'<br />Backtrace:<pre>';
+ debug_print_backtrace();
+ die('</pre>');
+ } // END - if
+
+ // Set this function as called
+ $GLOBALS[__FUNCTION__] = true;
+
// Init message
$debug = '';
);
// @TODO Add a little more infos here
- logDebugMessage(__FUNCTION__, __LINE__, strip_tags($message));
+ logDebugMessage($F, $L, strip_tags($message));
} // END - if
// Add output
- $debug .= "Please report this bug at <a title=\"Direct link to the bug-tracker\" href=\"http://bugs.mxchange.org\" rel=\"external\" target=\"_blank\">bugs.mxchange.org</a> and include the logfile from <strong>" . getConfig('CACHE_PATH') . "debug.log</strong> in your report (you can now attach files):<pre>";
+ $debug .= 'Please report this bug at <a title="Direct link to the bug-tracker" href="http://bugs.mxchange.org" rel="external" target="_blank">http://bugs.mxchange.org</a> and include the logfile from <strong>' . str_replace(getConfig('PATH'), '', getConfig('CACHE_PATH')) . 'debug.log</strong> in your report (you can now attach files):<pre>';
$debug .= debug_get_printable_backtrace();
- $debug .= "</pre>\nRequest-URI: " . getRequestUri()."<br />\n";
- $debug .= "Thank you for finding bugs.";
+ $debug .= '</pre>';
+ $debug .= '<div>Request-URI: ' . getRequestUri() . '</div>';
+ $debug .= '<div>Thank you for finding bugs.</div>';
+
+ // Send an email? (e.g. not wanted for evaluation errors)
+ if (($sendEmail === true) && (!isInstallationPhase())) {
+ // Prepare content
+ $content = array(
+ 'message' => trim($message),
+ 'backtrace' => trim(debug_get_mailable_backtrace())
+ );
+
+ // Send email to webmaster
+ sendAdminNotification(getMessage('DEBUG_REPORT_BUG_SUBJECT'), 'admin_report_bug', $content);
+ } // END - if
// And abort here
- // @TODO This cannot be rewritten to app_die(), try to find a solution for this.
- die($debug);
+ app_die($F, $L, $debug);
}
-// Generates a ***weak*** seed (taken from de.php.net/mt_srand)
+// Generates a ***weak*** seed
function generateSeed () {
- list($usec, $sec) = explode(' ', microtime());
- $microTime = (((float)$sec + (float)$usec)) * 100000;
- return $microTime;
+ return microtime(true) * 100000;
}
// Converts a message code to a human-readable message
$message = '';
switch ($code) {
case '': break;
- case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
- case getCode('LOGOUT_FAILED') : $message = "<span class=\"guest_failed\">{--LOGOUT_FAILED--}</span>"; break;
- case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
- case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
- case getCode('ACCOUNT_LOCKED') : $message = getMessage('MEMBER_ACCOUNT_LOCKED_UNC'); break;
- case getCode('USER_404') : $message = getMessage('USER_404'); break;
- case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
- case getCode('ALREADY_CONFIRMED'): $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
- case getCode('WRONG_PASS') : $message = getMessage('LOGIN_WRONG_PASS'); break;
- case getCode('WRONG_ID') : $message = getMessage('LOGIN_WRONG_ID'); break;
- case getCode('ID_LOCKED') : $message = getMessage('LOGIN_ID_LOCKED'); break;
- case getCode('ID_UNCONFIRMED') : $message = getMessage('LOGIN_ID_UNCONFIRMED'); break;
- case getCode('NO_COOKIES') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_NO_COOKIES'); break;
- case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
- case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
- case getCode('MODULE_MEM_ONLY') : $message = sprintf(getMessage('MODULE_MEM_ONLY'), getRequestElement('mod')); break;
- case getCode('OVERLENGTH') : $message = getMessage('MEMBER_TEXT_OVERLENGTH'); break;
- case getCode('URL_FOUND') : $message = getMessage('MEMBER_TEXT_CONTAINS_URL'); break;
- case getCode('SUBJ_URL') : $message = getMessage('MEMBER_SUBJ_CONTAINS_URL'); break;
- case getCode('BLIST_URL') : $message = "{--MEMBER_URL_BLACK_LISTED--}<br />\n{--MEMBER_BLIST_TIME--}: ".generateDateTime(getRequestElement('blist'), '0'); break;
- case getCode('NO_RECS_LEFT') : $message = getMessage('MEMBER_SELECTED_MORE_RECS'); break;
- case getCode('INVALID_TAGS') : $message = getMessage('MEMBER_HTML_INVALID_TAGS'); break;
- case getCode('MORE_POINTS') : $message = getMessage('MEMBER_MORE_POINTS_NEEDED'); break;
- case getCode('MORE_RECEIVERS1') : $message = getMessage('MEMBER_ENTER_MORE_RECEIVERS'); break;
- case getCode('MORE_RECEIVERS2') : $message = getMessage('MEMBER_NO_MORE_RECEIVERS_FOUND'); break;
- case getCode('MORE_RECEIVERS3') : $message = sprintf(getMessage('MEMBER_ENTER_MORE_MIN_RECEIVERS'), getConfig('order_min')); break;
- case getCode('INVALID_URL') : $message = getMessage('MEMBER_ENTER_INVALID_URL'); break;
+ case getCode('LOGOUT_DONE') : $message = getMessage('LOGOUT_DONE'); break;
+ case getCode('LOGOUT_FAILED') : $message = '<span class="guest_failed">{--LOGOUT_FAILED--}</span>'; break;
+ case getCode('DATA_INVALID') : $message = getMessage('MAIL_DATA_INVALID'); break;
+ case getCode('POSSIBLE_INVALID') : $message = getMessage('MAIL_POSSIBLE_INVALID'); break;
+ case getCode('USER_404') : $message = getMessage('USER_404'); break;
+ case getCode('STATS_404') : $message = getMessage('MAIL_STATS_404'); break;
+ case getCode('ALREADY_CONFIRMED') : $message = getMessage('MAIL_ALREADY_CONFIRMED'); break;
+ case getCode('WRONG_PASS') : $message = getMessage('LOGIN_WRONG_PASS'); break;
+ case getCode('WRONG_ID') : $message = getMessage('LOGIN_WRONG_ID'); break;
+ case getCode('ACCOUNT_LOCKED') : $message = getMessage('LOGIN_STATUS_LOCKED'); break;
+ case getCode('ACCOUNT_UNCONFIRMED'): $message = getMessage('LOGIN_STATUS_UNCONFIRMED'); break;
+ case getCode('COOKIES_DISABLED') : $message = getMessage('LOGIN_COOKIES_DISABLED'); break;
+ case getCode('BEG_SAME_AS_OWN') : $message = getMessage('BEG_SAME_UID_AS_OWN'); break;
+ case getCode('LOGIN_FAILED') : $message = getMessage('LOGIN_FAILED_GENERAL'); break;
+ case getCode('MODULE_MEMBER_ONLY') : $message = getMaskedMessage('MODULE_MEMBER_ONLY', getRequestParameter('mod')); break;
+ case getCode('OVERLENGTH') : $message = getMessage('MEMBER_TEXT_OVERLENGTH'); break;
+ case getCode('URL_FOUND') : $message = getMessage('MEMBER_TEXT_CONTAINS_URL'); break;
+ case getCode('SUBJ_URL') : $message = getMessage('MEMBER_SUBJ_CONTAINS_URL'); break;
+ case getCode('BLIST_URL') : $message = '{--MEMBER_URL_BLACK_LISTED--}<br />{--MEMBER_BLIST_TIME--}: ' . generateDateTime(getRequestParameter('blist'), 0); break;
+ case getCode('NO_RECS_LEFT') : $message = getMessage('MEMBER_SELECTED_MORE_RECS'); break;
+ case getCode('INVALID_TAGS') : $message = getMessage('MEMBER_HTML_INVALID_TAGS'); break;
+ case getCode('MORE_POINTS') : $message = getMessage('MEMBER_MORE_POINTS_NEEDED'); break;
+ case getCode('MORE_RECEIVERS1') : $message = getMessage('MEMBER_ENTER_MORE_RECEIVERS'); break;
+ case getCode('MORE_RECEIVERS2') : $message = getMessage('MEMBER_NO_MORE_RECEIVERS_FOUND'); break;
+ case getCode('MORE_RECEIVERS3') : $message = getMessage('MEMBER_ENTER_MORE_MIN_RECEIVERS'); break;
+ case getCode('INVALID_URL') : $message = getMessage('MEMBER_ENTER_INVALID_URL'); break;
+ case getCode('NO_MAIL_TYPE') : $message = getMessage('MEMBER_NO_MAIL_TYPE_SELECTED'); break;
+ case getCode('UNKNOWN_ERROR') : $message = getMessage('LOGIN_UNKNOWN_ERROR'); break;
+ case getCode('UNKNOWN_STATUS') : $message = getMessage('LOGIN_UNKNOWN_STATUS'); break;
case getCode('ERROR_MAILID'):
if (isExtensionActive('mailid', true)) {
$message = getMessage('ERROR_CONFIRMING_MAIL');
} else {
- $message = sprintf(getMessage('EXTENSION_PROBLEM_NOT_INSTALLED'), 'mailid');
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXTENSION_NOT_INSTALLED', 'mailid');
}
break;
case getCode('EXTENSION_PROBLEM'):
- if (isGetRequestElementSet('ext')) {
- $message = generateExtensionInactiveNotInstalledMessage(getRequestElement('ext'));
+ if (isGetRequestParameterSet('ext')) {
+ $message = generateExtensionInactiveNotInstalledMessage(getRequestParameter('ext'));
} else {
$message = getMessage('EXTENSION_PROBLEM_UNSET_EXT');
}
break;
case getCode('URL_TLOCK'):
+ // @TODO Move this SQL code into a function, let's say 'getTimestampFromPoolId($id) ?
$result = SQL_QUERY_ESC("SELECT `timestamp` FROM `{?_MYSQL_PREFIX?}_pool` WHERE `id`=%s LIMIT 1",
- array(bigintval(getRequestElement('id'))), __FILE__, __LINE__);
+ array(bigintval(getRequestParameter('id'))), __FUNCTION__, __LINE__);
// Load timestamp from last order
list($timestamp) = SQL_FETCHROW($result);
- $timestamp = generateDateTime($timestamp, '1');
// Free memory
SQL_FREERESULT($result);
+ // Translate it for templates
+ $timestamp = generateDateTime($timestamp, 1);
+
// Calculate hours...
$STD = round(getConfig('url_tlock') / 60 / 60);
default:
// Missing/invalid code
- $message = sprintf(getMessage('UNKNOWN_MAILID_CODE'), $code);
+ $message = getMaskedMessage('UNKNOWN_MAILID_CODE', $code);
// Log it
logDebugMessage(__FUNCTION__, __LINE__, $message);
return $message;
}
-// Generate a "link" for the given admin id (admin_id)
-function generateAdminLink ($adminId) {
- // No assigned admin is default
- $admin = "<span class=\"admin_note\">{--ADMIN_NO_ADMIN_ASSIGNED--}</span>";
-
- // Zero? = Not assigned
- if (bigintval($adminId) > 0) {
- // Load admin's login
- $login = getAdminLogin($adminId);
-
- // Is the login valid?
- if ($login != '***') {
- // Is the extension there?
- if (isExtensionActive('admins')) {
- // Admin found
- $admin = "<a href=\"".generateEmailLink(getAdminEmail($adminId), 'admins')."\">" . $login."</a>";
- } else {
- // Extension not found
- $admin = sprintf(getMessage('EXTENSION_PROBLEM_NOT_INSTALLED'), 'admins');
- }
- } else {
- // Maybe deleted?
- $admin = "<div class=\"admin_note\">".sprintf(getMessage('ADMIN_ID_404'), $adminId)."</div>";
- }
- } // END - if
-
- // Return result
- return $admin;
-}
-
// Compile characters which are allowed in URLs
function compileUriCode ($code, $simple = true) {
// Compile constants
return $code;
}
-// Function taken from user comments on www.php.net / function eregi()
+// Function taken from user comments on www.php.net / function isInStringIgnoreCase()
function isUrlValidSimple ($url) {
// Prepare URL
- $url = secureString(str_replace("\\", '', compileCode(urldecode($url))));
+ $url = secureString(str_replace("\\", '', compileRawCode(urldecode($url))));
// Allows http and https
$http = "(http|https)+(:\/\/)";
$pattern['d1g12'] = $http . $domain1 . $getstring1;
$pattern['d2g12'] = $http . $domain2 . $getstring1;
$pattern['ipg12'] = $http . $ip . $getstring1;
+
// Test all patterns
$reg = false;
foreach ($pattern as $key => $pat) {
// Debug regex?
- if (isDebugRegExpressionEnabled()) {
+ if (isDebugRegularExpressionEnabled()) {
// @TODO Are these convertions still required?
$pat = str_replace('.', "\.", $pat);
$pat = str_replace('@', "\@", $pat);
- //* DEBUG: */ outputHtml($key."= " . $pat . "<br />");
+ //* DEBUG: */ debugOutput($key."= " . $pat);
} // END - if
// Check if expression matches
- $reg = ($reg || preg_match(('^' . $pat.'^'), $url));
+ $reg = ($reg || preg_match(('^' . $pat . '^'), $url));
// Does it match?
if ($reg === true) break;
$tmp = $FQFN . '.tmp';
// Open the source file
- $fp = fopen($FQFN, 'r') or outputHtml('<strong>READ:</strong> ' . $FQFN . '<br />');
+ $fp = fopen($FQFN, 'r') or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot read. file=' . basename($FQFN));
// Is the resource valid?
if (is_resource($fp)) {
// Open temporary file
- $fp_tmp = fopen($tmp, 'w') or outputHtml('<strong>WRITE:</strong> ' . $tmp . '<br />');
+ $fp_tmp = fopen($tmp, 'w') or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot write. tmp=' . basename($tmp) . ',file=' . $FQFN);
// Is the resource again valid?
if (is_resource($fp_tmp)) {
// Read from source file
$line = fgets ($fp, 1024);
- if (strpos($line, $search) > -1) { $next = 0; $found = true; }
+ if (strpos($line, $search) > -1) { $next = '0'; $found = true; }
if ($next > -1) {
if ($next === $seek) {
} // END - if
// Write to temp file
- fputs($fp_tmp, $line);
+ fwrite($fp_tmp, $line);
} // END - while
// Close temp file
}
} else {
// File not found, not readable or writeable
- outputHtml('<strong>404:</strong> ' . $FQFN . '<br />');
+ debug_report_bug(__FUNCTION__, __LINE__, 'File not readable/writeable. file=' . basename($FQFN));
}
// An error was detected!
}
// Send notification to admin
function sendAdminNotification ($subject, $templateName, $content=array(), $userid = '0') {
- if (getExtensionVersion('admins') >= '0.4.1') {
+ if ((isExtensionInstalledAndNewer('admins', '0.4.1')) && (function_exists('sendAdminsEmails'))) {
// Send new way
sendAdminsEmails($subject, $templateName, $content, $userid);
} else {
// Remove CRLF
$message = str_replace("\r", '', str_replace("\n", '', $message));
- // Log this message away, we better don't call app_die() here to prevent an endless loop
- $fp = fopen(getConfig('CACHE_PATH') . 'debug.log', 'a') or die(__FUNCTION__.'['.__LINE__.']: Cannot write logfile debug.log!');
- fwrite($fp, date('d.m.Y|H:i:s', time()) . '|' . getModule() . '|' . basename($funcFile) . '|' . $line . '|' . $message . "\n");
+ // Log this message away
+ $fp = fopen(getConfig('CACHE_PATH') . 'debug.log', 'a') or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot write logfile debug.log!');
+ fwrite($fp, date('d.m.Y|H:i:s', time()) . '|' . getModule(false) . '|' . basename($funcFile) . '|' . $line . '|' . $message . "\n");
fclose($fp);
} // END - if
}
// Converts timestamp selections into a timestamp
function convertSelectionsToTimestamp (&$postData, &$DATA, &$id, &$skip) {
// Init test variable
+ $skip = false;
$test2 = '';
// Get last three chars
if ((isset($postData[$test.'_ye'])) && (isset($postData[$test.'_mo'])) && (isset($postData[$test.'_we'])) && (isset($postData[$test.'_da'])) && (isset($postData[$test.'_ho'])) && (isset($postData[$test.'_mi'])) && (isset($postData[$test.'_se'])) && ($test != $test2)) {
// Generate timestamp
$postData[$test] = createTimestampFromSelections($test, $postData);
- $DATA[] = sprintf("%s='%s'", $test, $postData[$test]);
+ $DATA[] = sprintf("`%s`='%s'", $test, $postData[$test]);
+ $GLOBALS['skip_config'][$test] = true;
// Remove data from array
foreach (array('ye', 'mo', 'we', 'da', 'ho', 'mi', 'se') as $rem) {
- unset($postData[$test.'_' . $rem]);
+ unset($postData[$test . '_' . $rem]);
} // END - foreach
// Skip adding
- unset($id); $skip = true; $test2 = $test;
+ unset($id);
+ $skip = true;
+ $test2 = $test;
} // END - if
- } else {
- // Process this entry
- $skip = false;
- $test2 = '';
- }
+ } // END - if
}
// Reverts the german decimal comma into Computer decimal dot
}
// Handle menu-depending failed logins and return the rendered content
-function handleLoginFailtures ($accessLevel) {
+function handleLoginFailures ($accessLevel) {
// Default output is empty ;-)
$OUT = '';
// Is the session data set?
- if ((isSessionVariableSet('mxchange_' . $accessLevel.'_failures')) && (isSessionVariableSet('mxchange_' . $accessLevel.'_last_fail'))) {
+ if ((isSessionVariableSet('mailer_' . $accessLevel . '_failures')) && (isSessionVariableSet('mailer_' . $accessLevel . '_last_failure'))) {
// Ignore zero values
- if (getSession('mxchange_' . $accessLevel.'_failures') > 0) {
+ if (getSession('mailer_' . $accessLevel . '_failures') > 0) {
// Non-guest has login failures found, get both data and prepare it for template
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>):accessLevel={$accessLevel}<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "accessLevel={$accessLevel}<br />");
$content = array(
- 'login_failures' => getSession('mxchange_' . $accessLevel.'_failures'),
- 'last_failure' => generateDateTime(getSession('mxchange_' . $accessLevel.'_last_fail'), '2')
+ 'login_failures' => getSession('mailer_' . $accessLevel . '_failures'),
+ 'last_failure' => generateDateTime(getSession('mailer_' . $accessLevel . '_last_failure'), 2)
);
// Load template
} // END - if
// Reset session data
- setSession('mxchange_' . $accessLevel.'_failures', '');
- setSession('mxchange_' . $accessLevel.'_last_fail', '');
+ setSession('mailer_' . $accessLevel . '_failures', '');
+ setSession('mailer_' . $accessLevel . '_last_failure', '');
} // END - if
// Return rendered content
}
// Rebuild cache
-function rebuildCacheFile ($cache, $inc = '', $force = false) {
+function rebuildCache ($cache, $inc = '', $force = false) {
// Debug message
/* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, sprintf("cache=%s, inc=%s, force=%s", $cache, $inc, intval($force)));
// Rebuild cache
if ($GLOBALS['cache_instance']->loadCacheFile($cache)) {
// Destroy it
- $GLOBALS['cache_instance']->removeCacheFile(false, $force);
+ $GLOBALS['cache_instance']->removeCacheFile($force);
} // END - if
// Include file given?
// Is the include there?
if (isIncludeReadable($inc)) {
// And rebuild it from scratch
- //* DEBUG: */ outputHtml(__FUNCTION__."(<font color=\"#0000aa\">".__LINE__."</font>): inc={$inc} - LOADED!<br />");
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "inc={$inc} - LOADED!<br />");
loadInclude($inc);
} else {
// Include not found!
if ((empty($mode)) && (isset($data['mode']))) $mode = $data['mode'];
// Generate receiver list
- $RECEIVER = generateReceiverList($data['cat'], $data['receiver'], $mode);
+ $receiver = generateReceiverList($data['cat'], $data['receiver'], $mode);
// Receivers added?
- if (!empty($RECEIVER)) {
+ if (!empty($receiver)) {
// Add bonus mail to queue
addBonusMailToQueue(
$data['subject'],
$data['text'],
- $RECEIVER,
+ $receiver,
$data['points'],
$data['seconds'],
$data['url'],
// Determines referal id and sets it
function determineReferalId () {
- // Skip this in non-html-mode
- if (getOutputMode() != '0') return false;
+ // Skip this in non-html-mode and outside ref.php
+ if ((getOutputMode() != 0) && (basename($_SERVER['PHP_SELF']) != 'ref.php')) return false;
// Check if refid is set
if ((isset($GLOBALS['refid'])) && ($GLOBALS['refid'] > 0)) {
// This is fine...
- } elseif ((isGetRequestElementSet('user')) && (basename($_SERVER['PHP_SELF']) == 'click.php')) {
+ } elseif ((isGetRequestParameterSet('user')) && (basename($_SERVER['PHP_SELF']) == 'click.php')) {
// The variable user comes from the click-counter script click.php and we only accept this here
- $GLOBALS['refid'] = bigintval(getRequestElement('user'));
- } elseif (isPostRequestElementSet('refid')) {
+ $GLOBALS['refid'] = bigintval(getRequestParameter('user'));
+ } elseif (isPostRequestParameterSet('refid')) {
// Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
- $GLOBALS['refid'] = secureString(postRequestElement('refid'));
- } elseif (isGetRequestElementSet('refid')) {
+ $GLOBALS['refid'] = secureString(postRequestParameter('refid'));
+ } elseif (isGetRequestParameterSet('refid')) {
// Get referal id from variable refid (so I hope this makes my script more compatible to other scripts)
- $GLOBALS['refid'] = secureString(getRequestElement('refid'));
- } elseif (isGetRequestElementSet('ref')) {
+ $GLOBALS['refid'] = secureString(getRequestParameter('refid'));
+ } elseif (isGetRequestParameterSet('ref')) {
// Set refid=ref (the referal link uses such variable)
- $GLOBALS['refid'] = secureString(getRequestElement('ref'));
+ $GLOBALS['refid'] = secureString(getRequestParameter('ref'));
} elseif ((isSessionVariableSet('refid')) && (getSession('refid') != 0)) {
// Set session refid als global
$GLOBALS['refid'] = bigintval(getSession('refid'));
- } elseif ((isExtensionInstalledAndNewer('user', '0.3.4')) && (getConfig('select_user_zero_refid')) == 'Y') {
+ } elseif ((isExtensionInstalledAndNewer('user', '0.3.4')) && (getConfig('select_user_zero_refid') == 'Y')) {
// Select a random user which has confirmed enougth mails
$GLOBALS['refid'] = determineRandomReferalId();
- } elseif ((isExtensionInstalled('sql_patches')) && (getConfig('def_refid') > 0)) {
+ } elseif ((isExtensionInstalledAndNewer('sql_patches', '0.1.2')) && (getConfig('def_refid') > 0)) {
// Set default refid as refid in URL
$GLOBALS['refid'] = getConfig('def_refid');
} else {
- // No default ID when sql_patches is not installed or none set
- $GLOBALS['refid'] = 0;
+ // No default id when sql_patches is not installed or none set
+ $GLOBALS['refid'] = '0';
}
// Set cookie when default refid > 0
- if (!isSessionVariableSet('refid') || (!empty($GLOBALS['refid'])) || ((getSession('refid') == '0') && (getConfig('def_refid') > 0))) {
+ if (!isSessionVariableSet('refid') || (!empty($GLOBALS['refid'])) || ((getSession('refid') == '0') && (isConfigEntrySet('def_refid')) && (getConfig('def_refid') > 0))) {
+ // Default is not found
+ $found = false;
+
+ // Do we have nickname or userid set?
+ if ((isExtensionActive('nickname')) && (isNicknameUsed($GLOBALS['refid']))) {
+ // Nickname in URL, so load the id
+ $found = fetchUserData($GLOBALS['refid'], 'nickname');
+ } elseif ($GLOBALS['refid'] > 0) {
+ // Direct userid entered
+ $found = fetchUserData($GLOBALS['refid']);
+ }
+
+ // Is the record valid?
+ if ((($found === false) || (!isUserDataValid())) && (isConfigEntrySet('def_refid'))) {
+ // No, then reset referal id
+ $GLOBALS['refid'] = getConfig('def_refid');
+ } // END - if
+
// Set cookie
setSession('refid', $GLOBALS['refid']);
} // END - if
// Call the filter chain 'shutdown'
runFilterChain('shutdown', null);
- if (SQL_IS_LINK_UP()) {
+ // Check if not in installation phase and the link is up
+ if ((!isInstallationPhase()) && (SQL_IS_LINK_UP())) {
// Close link
- SQL_CLOSE(__FILE__, __LINE__);
+ SQL_CLOSE(__FUNCTION__, __LINE__);
} elseif (!isInstallationPhase()) {
// No database link
- addFatalMessage(__FILE__, __LINE__, getMessage('NO_DB_LINK_SHUTDOWN'));
+ addFatalMessage(__FUNCTION__, __LINE__, getMessage('NO_DB_LINK_SHUTDOWN'));
}
// Stop executing here
exit;
}
-// Setter for userid
-function setUserId ($userid) {
- $GLOBALS['userid'] = bigintval($userid);
+// Init member id
+function initMemberId () {
+ $GLOBALS['member_id'] = '0';
}
-// Getter for userid or returns zero
-function getUserId () {
- // Default userid
- $userid = 0;
+// Setter for member id
+function setMemberId ($memberid) {
+ // We should not set member id to zero
+ if ($memberid == '0') debug_report_bug(__FUNCTION__, __LINE__, 'Userid should not be set zero.');
- // Is the userid set?
- if (isUserIdSet()) {
+ // Set it secured
+ $GLOBALS['member_id'] = bigintval($memberid);
+}
+
+// Getter for member id or returns zero
+function getMemberId () {
+ // Default member id
+ $memberid = '0';
+
+ // Is the member id set?
+ if (isMemberIdSet()) {
// Then use it
- $userid = $GLOBALS['userid'];
+ $memberid = $GLOBALS['member_id'];
} // END - if
// Return it
- return $userid;
+ return $memberid;
}
-// Checks ether the userid is set
-function isUserIdSet () {
- return (isset($GLOBALS['userid']));
+// Checks ether the member id is set
+function isMemberIdSet () {
+ return (isset($GLOBALS['member_id']));
}
// Handle message codes from URL
function handleCodeMessage () {
- if (isGetRequestElementSet('code')) {
+ if (isGetRequestParameterSet('code')) {
// Default extension is 'unknown'
$ext = 'unknown';
// Is extension given?
- if (isGetRequestElementSet('ext')) $ext = getRequestElement('ext');
+ if (isGetRequestParameterSet('ext')) $ext = getRequestParameter('ext');
// Convert the 'code' parameter from URL to a human-readable message
- $message = getMessageFromErrorCode(getRequestElement('code'));
+ $message = getMessageFromErrorCode(getRequestParameter('code'));
// Load message template
loadTemplate('message', false, $message);
// Is the extra title set?
if (!isExtraTitleSet()) {
// No, then abort here
- debug_report_bug('extra_title is not set!');
+ debug_report_bug(__FUNCTION__, __LINE__, 'extra_title is not set!');
} // END - if
// Return it
// Is the extension empty?
if (empty($ext_name)) {
// This should not happen
- debug_report_bug(__FUNCTION__ . ': Parameter ext is empty. This should not happen.');
+ debug_report_bug(__FUNCTION__, __LINE__, 'Parameter ext is empty. This should not happen.');
} // END - if
// Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXT_INACTIVE', $ext_name);
// Is an admin logged in?
if (isAdmin()) {
// Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE'), $ext_name);
+ $message = getMaskedMessage('ADMIN_EXTENSION_PROBLEM_EXT_INACTIVE', $ext_name);
} // END - if
// Return prepared message
// Is the extension empty?
if (empty($ext_name)) {
// This should not happen
- debug_report_bug(__FUNCTION__ . ': Parameter ext is empty. This should not happen.');
+ debug_report_bug(__FUNCTION__, __LINE__, 'Parameter ext is empty. This should not happen.');
} // END - if
// Default message
- $message = sprintf(getMessage('EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+ $message = getMaskedMessage('EXTENSION_PROBLEM_EXTENSION_NOT_INSTALLED', $ext_name);
// Is an admin logged in?
if (isAdmin()) {
// Then output admin message
- $message = sprintf(getMessage('ADMIN_EXTENSION_PROBLEM_EXT_NOT_INSTALLED'), $ext_name);
+ $message = getMaskedMessage('ADMIN_EXTENSION_PROBLEM_EXTENSION_NOT_INSTALLED', $ext_name);
} // END - if
// Return prepared message
// Reads a directory recursively by default and searches for files not matching
// an exclusion pattern. You can now keep the exclusion pattern empty for reading
// a whole directory.
-function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true) {
+function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = false, $addBaseDir = true, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = true, $suffix = '') {
// Add default entries we should exclude
$excludeArray[] = '.';
$excludeArray[] = '..';
$files = array();
// Open directory
- $dirPointer = opendir(getConfig('PATH') . $baseDir) or app_die(__FUNCTION__, __LINE__, 'Cannot read directory ' . basename($baseDir) . '.');
+ $dirPointer = opendir(getConfig('PATH') . $baseDir) or debug_report_bug(__FUNCTION__, __LINE__, 'Cannot read directory ' . basename($baseDir) . '.');
// Read all entries
while ($baseFile = readdir($dirPointer)) {
// Exclude '.', '..' and entries in $excludeArray automatically
if (in_array($baseFile, $excludeArray, true)) {
// Exclude them
- //* DEBUG: */ outputHtml('excluded=' . $baseFile . "<br />");
+ //* DEBUG: */ debugOutput('excluded=' . $baseFile);
continue;
} // END - if
// Remove double slashes
$FQFN = str_replace('//', '/', $FQFN);
- // Check if the base filename matches an exclusion pattern and if the pattern is not empty
+ // Check if the base filenname matches an exclusion pattern and if the pattern is not empty
if ((!empty($excludePattern)) && (preg_match($excludePattern, $baseFile, $match))) {
// These Lines are only for debugging!!
- //* DEBUG: */ outputHtml('baseDir:' . $baseDir . "<br />");
- //* DEBUG: */ outputHtml('baseFile:' . $baseFile . "<br />");
- //* DEBUG: */ outputHtml('FQFN:' . $FQFN . "<br />");
+ //* DEBUG: */ debugOutput('baseDir:' . $baseDir);
+ //* DEBUG: */ debugOutput('baseFile:' . $baseFile);
+ //* DEBUG: */ debugOutput('FQFN:' . $FQFN);
// Exclude this one
continue;
// Skip this file
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "Invalid prefix in file " . $baseFile . ", prefix=" . $prefix);
continue;
+ } elseif ((!empty($suffix)) && (substr($baseFile, -(strlen($suffix . $extension)), (strlen($suffix . $extension))) != $suffix . $extension)) {
+ // Skip wrong suffix as well
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "Invalid suffix in file " . $baseFile . ", suffix=" . $suffix);
+ continue;
} elseif (!isFileReadable($FQFN)) {
// Not readable so skip it
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, "File " . $FQFN . " is not readable!");
}
} else {
// We found .php file but should not search for them, why?
- debug_report_bug('We should find files with extension=' . $extension . ', but we found a PHP script.');
+ debug_report_bug(__FUNCTION__, __LINE__, 'We should find files with extension=' . $extension . ', but we found a PHP script.');
}
} elseif (substr($baseFile, -4, 4) == $extension) {
// Other, generic file found
closedir($dirPointer);
// Sort array
- asort($files);
+ sort($files);
// Return array with include files
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, '- Left!');
// Add SQL debug data to array for later output
function addSqlToDebug ($result, $sqlString, $timing, $F, $L) {
- // Don't execute anything here if we don't need
- if (getConfig('display_debug_sqls') != 'Y') return;
+ // Already executed?
+ if (isset($GLOBALS['debug_sqls'][$F][$L][$sqlString])) {
+ // Then abort here, we don't need to profile a query twice
+ return;
+ } // END - if
+
+ // Remeber this as profiled (or not, but we don't care here)
+ $GLOBALS['debug_sqls'][$F][$L][$sqlString] = true;
+
+ // Do we have cache?
+ if (!isset($GLOBALS['debug_sql_available'])) {
+ // Check it and cache it in $GLOBALS
+ $GLOBALS['debug_sql_available'] = ((isConfigurationLoaded()) && (isExtensionInstalledAndNewer('other', '0.2.2')) && (getConfig('display_debug_sqls') == 'Y'));
+ } // END - if
+
+ // Don't execute anything here if we don't need or ext-other is missing
+ if ($GLOBALS['debug_sql_available'] === false) {
+ return;
+ } // END - if
// Generate record
$record = array(
$GLOBALS['cache_instance'] = new CacheSystem();
if ($GLOBALS['cache_instance']->getStatus() != 'done') {
// Failed to initialize cache sustem
- addFatalMessage(__FILE__, __LINE__, "(<font color=\"#0000aa\">".__LINE__."</font>): ".getMessage('CACHE_CANNOT_INITIALIZE'));
+ addFatalMessage(__FUNCTION__, __LINE__, '(<font color="#0000aa">' . __LINE__ . '</font>): {--CACHE_CANNOT_INITIALIZE--}');
} // END - if
}
return $ret;
}
-// Handles fatal errors
-function handleFatalErrors () {
- // Do we have errors to handle and right output mode?
- if ((getTotalFatalErrors() == 0) || (getOutputMode() != 0)) {
- // Abort executing here
- return false;
+// Print code with line numbers
+function linenumberCode ($code) {
+ if (!is_array($code)) $codeE = explode("\n", $code); else $codeE = $code;
+ $count_lines = count($codeE);
+
+ $r = 'Line | Code:<br />';
+ foreach($codeE as $line => $c) {
+ $r .= '<div class="line"><span class="linenum">';
+ if ($count_lines == 1) {
+ $r .= 1;
+ } else {
+ $r .= ($line == ($count_lines - 1)) ? '' : ($line+1);
+ }
+ $r .= '</span>|';
+
+ // Add code
+ $r .= '<span class="linetext">' . htmlentities($c) . '</span></div>';
+ }
+
+ return '<div class="code">' . $r . '</div>';
+}
+
+// Convert ';' to ', ' for e.g. receiver list
+function convertReceivers ($old) {
+ return str_replace(';', ', ', $old);
+}
+
+// Determines the right page title
+function determinePageTitle () {
+ // Config and database connection valid?
+ if ((isConfigLocalLoaded()) && (isConfigurationLoaded()) && (SQL_IS_LINK_UP()) && (isExtensionInstalledAndNewer('sql_patches', '0.1.6'))) {
+ // Init title
+ $TITLE = '';
+
+ // Title decoration enabled?
+ if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_left') != '')) $TITLE .= trim(getConfig('title_left')) . ' ';
+
+ // Do we have some extra title?
+ if (isExtraTitleSet()) {
+ // Then prepent it
+ $TITLE .= getExtraTitle() . ' by ';
+ } // END - if
+
+ // Add main title
+ $TITLE .= getConfig('MAIN_TITLE');
+
+ // Add title of module? (middle decoration will also be added!)
+ if ((getConfig('enable_mod_title') == 'Y') || ((!isWhatSet()) && (!isActionSet())) || (getModule() == 'admin')) {
+ $TITLE .= ' ' . trim(getConfig('title_middle')) . ' ' . getModuleTitle(getModule());
+ } // END - if
+
+ // Add title from what file
+ $mode = '';
+ if (getModule() == 'login') $mode = 'member';
+ elseif (getModule() == 'index') $mode = 'guest';
+ if ((!empty($mode)) && (getConfig('enable_what_title') == 'Y')) $TITLE .= ' ' . trim(getConfig('title_middle')) . ' ' . getTitleFromMenu($mode, getWhat());
+
+ // Add title decorations? (right)
+ if ((getConfig('enable_title_deco') == 'Y') && (getConfig('title_right') != '')) $TITLE .= ' ' . trim(getConfig('title_right'));
+
+ // Remember title in constant for the template
+ $pageTitle = $TITLE;
+ } elseif ((isInstalled()) && (isAdminRegistered())) {
+ // Installed, admin registered but no ext-sql_patches
+ $pageTitle = '[-- ' . getConfig('MAIN_TITLE') . ' - ' . getModuleTitle(getModule()) . ' --]';
+ } elseif ((isInstalled()) && (!isAdminRegistered())) {
+ // Installed but no admin registered
+ $pageTitle = getMessage('SETUP_OF_MAILER');
+ } elseif ((!isInstalled()) || (!isAdminRegistered())) {
+ // Installation mode
+ $pageTitle = getMessage('INSTALLATION_OF_MAILER');
+ } else {
+ // Configuration not found!
+ $pageTitle = getMessage('NO_CONFIG_FOUND_TITLE');
+
+ // Do not add the fatal message in installation mode
+ if ((!isInstalling()) && (!isConfigurationLoaded())) addFatalMessage(__FUNCTION__, __LINE__, getMessage('NO_CONFIG_FOUND'));
+ }
+
+ // Return title
+ return decodeEntities($pageTitle);
+}
+
+// Checks wethere there is a cache file there. This function is cached.
+function isTemplateCached ($template) {
+ // Do we have cached this result?
+ if (!isset($GLOBALS['template_cache'][$template])) {
+ // Generate FQFN
+ $FQFN = generateCacheFqfn($template);
+
+ // Is it there?
+ $GLOBALS['template_cache'][$template] = isFileReadable($FQFN);
} // END - if
- // Set content type
- setContentType('text/html');
+ // Return it
+ return $GLOBALS['template_cache'][$template];
+}
- // Load config here
- loadIncludeOnce('inc/load_config.php');
+// Flushes non-flushed template cache to disk
+function flushTemplateCache ($template, $eval) {
+ // Is this cache flushed?
+ if ((isDebuggingTemplateCache() === false) && (isTemplateCached($template) === false) && ($eval != '404')) {
+ // Generate FQFN
+ $FQFN = generateCacheFqfn($template);
- // Set unset variable
- if (empty($check)) $check = '';
+ // And flush it
+ writeToFile($FQFN, $eval, true);
+ } // END - if
+}
- // Default is none
- $content = '';
+// Reads a template cache
+function readTemplateCache ($template) {
+ // Check it again
+ if ((isDebuggingTemplateCache() === false) && (isTemplateCached($template))) {
+ // Generate FQFN
+ $FQFN = generateCacheFqfn($template);
- // Installation phase or regular mode?
- if ((isInstallationPhase())) {
- // While we are installing ouput other header than while it is installed... :-)
- $OUT = '';
- foreach (getFatalArray() as $key => $value) {
- // Prepare content for the template
- $content = array(
- 'key' => ($key + 1),
- 'value' => $value
- );
+ // And read from it
+ $GLOBALS['template_eval'][$template] = readFromFile($FQFN);
+ } // END - if
- // Load row template
- $OUT .= loadTemplate('install_fatal_row', true, $content);
- }
+ // And return it
+ return $GLOBALS['template_eval'][$template];
+}
- // Load main template
- $content = loadTemplate('install_fatal_table', true, $OUT);
- } elseif (isInstalled()) {
- // Display all runtime fatal errors
- $OUT = '';
- foreach (getFatalArray() as $key => $value) {
- // Prepare content for the template
- $content = array(
- 'key' => ($key + 1),
- 'value' => $value
- );
+// Escapes quotes (default is only double-quotes)
+function escapeQuotes ($str, $single = false) {
+ // Should we escape all?
+ if ($single === true) {
+ // Escape all (including null)
+ $str = addslashes($str);
+ } else {
+ // Escape only double-quotes but prevent double-quoting
+ $str = str_replace("\\\\", "\\", str_replace('"', "\\\"", $str));
+ }
- // Load row template
- $OUT .= loadTemplate('runtime_fatal_row', true, $content);
- }
+ // Return the escaped string
+ return $str;
+}
+
+// Escapes the JavaScript code, prevents \r and \n becoming char 10/13
+function escapeJavaScriptQuotes ($str) {
+ // Replace all double-quotes and secure back-ticks
+ $str = str_replace('"', '\"', str_replace("\\", '{BACK}', $str));
+
+ // Return it
+ return $str;
+}
+
+// Send out mails depending on the 'mod/modes' combination
+// @TODO Lame description for this function
+function sendModeMails ($mod, $modes) {
+ // Load hash
+ if (fetchUserData(getMemberId())) {
+ // Extract salt from cookie
+ $salt = substr(getSession('u_hash'), 0, -40);
+
+ // Now let's compare passwords
+ $hash = encodeHashForCookie(getUserData('password'));
+
+ // Does the hash match or should we change it?
+ if (($hash == getSession('u_hash')) || (postRequestParameter('pass1') == postRequestParameter('pass2'))) {
+ // Load the data
+ $content = getUserDataArray();
+
+ // Clear/init the content variable
+ $content['message'] = '';
+
+ // Which mail?
+ // @TODO Move this in a filter
+ switch ($mod) {
+ case 'mydata':
+ foreach ($modes as $mode) {
+ switch ($mode) {
+ case 'normal': break; // Do not add any special lines
+ case 'email': // Email was changed!
+ $content['message'] = getMessage('MEMBER_CHANGED_EMAIL').": ".postRequestParameter('old_email')."\n";
+ break;
+
+ case 'pass': // Password was changed
+ $content['message'] = getMessage('MEMBER_CHANGED_PASS')."\n";
+ break;
+
+ default:
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown mode %s detected.", $mode));
+ $content['message'] = getMessage('MEMBER_UNKNOWN_MODE') . ': ' . $mode . "\n\n";
+ break;
+ } // END - switch
+ } // END - foreach
- // Load main template
- $content = loadTemplate('runtime_fatal_table', true, $OUT);
+ if (isExtensionActive('country')) {
+ // Replace code with description
+ $content['country'] = generateCountryInfo(postRequestParameter('country_code'));
+ } // END - if
+
+ // Merge content with data from POST
+ $content = merge_array($content, postRequestArray());
+
+ // Load template
+ $message = loadEmailTemplate('member_mydata_notify', $content, getMemberId());
+
+ if (getConfig('admin_notify') == 'Y') {
+ // The admin needs to be notified about a profile change
+ $message_admin = 'admin_mydata_notify';
+ $sub_adm = getMessage('ADMIN_CHANGED_DATA');
+ } else {
+ // No mail to admin
+ $message_admin = '';
+ $sub_adm = '';
+ }
+
+ // Set subject lines
+ $sub_mem = getMessage('MEMBER_CHANGED_DATA');
+
+ // Output success message
+ $content = '<span class="member_done">{--MYDATA_MAIL_SENT--}</span>';
+ break;
+
+ default: // Unsupported module!
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unsupported module %s detected.", $mod));
+ $content = '<span class="member_failed">{--UNKNOWN_MODULE--}</span>';
+ break;
+ } // END - switch
+ } else {
+ // Passwords mismatch
+ $content = '<span class="member_failed">{--MEMBER_PASSWORD_ERROR--}</span>';
+ }
+ } else {
+ // Could not load profile
+ $content = '<span class="member_failed">{--MEMBER_CANNOT_LOAD_PROFILE--}</span>';
}
- // Message to regular users (non-admin)
- $CORR = getMessage('FATAL_REPORT_ERRORS');
+ // Send email to user if required
+ if ((!empty($sub_mem)) && (!empty($message))) {
+ // Send member mail
+ sendEmail($content['email'], $sub_mem, $message);
+ } // END - if
- // PHP warnings fixed
- if ($check == 'done') {
- if (isAdmin()) $CORR = getMessage('FATAL_CORRECT_ERRORS');
+ // Send only if no other error has occured
+ if (empty($content)) {
+ if ((!empty($sub_adm)) && (!empty($message_admin))) {
+ // Send admin mail
+ sendAdminNotification($sub_adm, $message_admin, $content, getMemberId());
+ } elseif (getConfig('admin_notify') == 'Y') {
+ // Cannot send mails to admin!
+ $content = getMessage('CANNOT_SEND_ADMIN_MAILS');
+ } else {
+ // No mail to admin
+ $content = '<span class="member_done">{--MYDATA_MAIL_SENT--}</span>';
+ }
} // END - if
- // Remember all in array
+ // Load template
+ loadTemplate('admin_settings_saved', false, $content);
+}
+
+// Generates a 'selection box' from given array
+function generateSelectionBoxFromArray ($options, $name, $optionValue, $optionContent = '', $extraName = '') {
+ // Start the output
+ $OUT = '<select name="' . $name . '" size="1" class="admin_select">
+<option value="X" disabled="disabled">{--PLEASE_SELECT--}</option>';
+
+ // Walk through all options
+ foreach ($options as $option) {
+ // Add the <option> entry
+ if (empty($optionContent)) {
+ // ... from template
+ $OUT .= loadTemplate('select_' . $name . $extraName . '_option', true, $option);
+ } else {
+ // Direct HTML code
+ $OUT .= '<option value="' . $option[$optionValue] . '">' . $option[$optionContent] . '</option>';
+ }
+ } // END - foreach
+
+ // Finish selection box
+ $OUT .= '</select>';
+
+ // Prepare output
$content = array(
- 'rows' => $content,
- 'corr' => $CORR
+ 'selection_box' => $OUT,
+ 'module' => getModule(),
+ 'what' => getWhat()
);
- // Load footer
- loadIncludeOnce('inc/header.php');
+ // Load template and return it
+ return loadTemplate('select_' . $name . $extraName . '_box', true, $content);
+}
- // Load main template
- loadTemplate('fatal_errors', false, $content);
+// Get a module from filename and access level
+function getModuleFromFileName ($file, $accessLevel) {
+ // Default is 'invalid';
+ $modCheck = 'invalid';
- // Delete all to prevent double-display
- initFatalMessages();
+ // @TODO This is still very static, rewrite it somehow
+ switch ($accessLevel) {
+ case 'admin':
+ $modCheck = 'admin';
+ break;
- // Load footer
- loadIncludeOnce('inc/footer.php');
+ case 'sponsor':
+ case 'guest':
+ case 'member':
+ $modCheck = getModule();
+ break;
- // Abort here
- shutdown();
+ default: // Unsupported file name / access level
+ debug_report_bug(__FUNCTION__, __LINE__, 'Unsupported file name=' . basename($file) . '/access level=' . $accessLevel);
+ break;
+ }
+
+ // Return result
+ return $modCheck;
+}
+
+// Encodes an URL for adding session id, etc.
+function encodeUrl ($url, $outputMode = '0') {
+ // Do we have already have a PHPSESSID inside or view.php is called? Then abort here
+ if ((strpos($url, session_name()) !== false) || (getOutputMode() == -3)) return $url;
+
+ // Do we have a valid session?
+ if (((!isset($GLOBALS['valid_session'])) || ($GLOBALS['valid_session'] === false) || (!isset($_COOKIE[session_name()]))) && (isSpider() === false)) {
+ // Invalid session
+ // Determine right seperator
+ $seperator = '&';
+ if (strpos($url, '?') === false) {
+ // No question mark
+ $seperator = '?';
+ } elseif ((getOutputMode() != '0') || ($outputMode != '0')) {
+ // Non-HTML mode
+ $seperator = '&';
+ }
+
+ // Add it to URL
+ if (session_id() != '') {
+ $url .= $seperator . session_name() . '=' . session_id();
+ } // END - if
+ } // END - if
+
+ // Add {?URL?} ?
+ if ((substr($url, 0, strlen(getConfig('URL'))) != getConfig('URL')) && (substr($url, 0, 7) != '{?URL?}') && (substr($url, 0, 7) != 'http://') && (substr($url, 0, 8) != 'https://')) {
+ // Add it
+ $url = '{?URL?}/' . $url;
+ } // END - if
+
+ // Return the URL
+ return $url;
+}
+
+// Simple check for spider
+function isSpider () {
+ // Get the UA
+ $userAgent = strtolower(detectUserAgent(true));
+
+ // It should not be empty, if so it is better a spider/bot
+ if (empty($userAgent)) return true;
+
+ // Is it a spider?
+ return ((strpos($userAgent, 'spider') !== false) || (strpos($userAgent, 'slurp') !== false) || (strpos($userAgent, 'bot') !== false) || (strpos($userAgent, 'archiver') !== false));
+}
+
+// Prepares the header for HTML output
+function loadHtmlHeader () {
+ // Run two filters:
+ // 1.) pre_page_header (mainly loads the page_header template and includes
+ // meta description)
+ runFilterChain('pre_page_header');
+
+ // Here can be something be added, but normally one of the two filters
+ // around this line should do the job for you.
+
+ // 2.) post_page_header (mainly to load stylesheet, extra JavaScripts and
+ // to close the head-tag)
+ // Include more header data here
+ runFilterChain('post_page_header');
+}
+
+// Adds page header and footer to output array element
+function addPageHeaderFooter () {
+ // Init output
+ $OUT = '';
+
+ // Add them all together. This is maybe to simple
+ foreach (array('page_header', 'output', 'page_footer') as $pagePart) {
+ // Add page part if set
+ if (isset($GLOBALS[$pagePart])) $OUT .= $GLOBALS[$pagePart];
+ } // END - foreach
+
+ // Transfer $OUT to 'output'
+ $GLOBALS['output'] = $OUT;
+}
+
+// Generates meta description for current module and 'what' value
+function generateMetaDescriptionCode () {
+ // Only include from guest area and if sql_patches has correct version
+ if ((getModule() == 'index') && (isExtensionInstalledAndNewer('sql_patches', '0.1.6'))) {
+ // Construct dynamic description
+ $DESCR = '{?MAIN_TITLE?} ' . trim(getConfig('title_middle')) . ' ' . getTitleFromMenu('guest', getWhat());
+
+ // Output it directly
+ $GLOBALS['page_header'] .= '<meta name="description" content="' . $DESCR . '" />';
+ } // END - if
+
+ // Remove depth
+ unset($GLOBALS['ref_level']);
+}
+
+// Generates an FQFN for template cache from the given template name
+function generateCacheFqfn ($template) {
+ // Is this cached?
+ if (!isset($GLOBALS['template_cache_fqfn'][$template])) {
+ // Generate the FQFN
+ $GLOBALS['template_cache_fqfn'][$template] = sprintf("%s_compiled/html/%s.tpl.cache", getConfig('CACHE_PATH'), $template);
+ } // END - if
+
+ // Return it
+ return $GLOBALS['template_cache_fqfn'][$template];
+}
+
+// Function to search for the last modified file
+function searchDirsRecursive ($dir, &$last_changed, $lookFor = 'Date') {
+ // Get dir as array
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dir=' . $dir);
+ // Does it match what we are looking for? (We skip a lot files already!)
+ // RegexPattern to exclude ., .., .revision, .svn, debug.log or .cache in the filenames
+ $excludePattern = '@(\.revision|\.svn|debug\.log|\.cache|config\.php)$@';
+
+ $ds = getArrayFromDirectory($dir, '', false, true, array(), '.php', $excludePattern);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'count(ds)='.count($ds));
+
+ // Walk through all entries
+ foreach ($ds as $d) {
+ // Generate proper FQFN
+ $FQFN = str_replace('//', '/', getConfig('PATH') . $dir . '/' . $d);
+
+ // Is it a file and readable?
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'dir=' . $dir . ',d=' . $d);
+ if (isFileReadable($FQFN)) {
+ // $FQFN is a readable file so extract the requested data from it
+ $check = extractRevisionInfoFromFile($FQFN, $lookFor);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File: ' . $d . ' found. check=' . $check);
+
+ // Is the file more recent?
+ if ((!isset($last_changed[$lookFor])) || ($last_changed[$lookFor] < $check)) {
+ // This file is newer as the file before
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'NEWER!');
+ $last_changed['path_name'] = $FQFN;
+ $last_changed[$lookFor] = $check;
+ } // END - if
+ } else {
+ // Not readable
+ /* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'File: ' . $d . ' not readable or directory.');
+ }
+ } // END - foreach
+}
+
+// "Fixes" null or empty string to count of dashes
+function fixNullEmptyToDashes ($str, $num) {
+ // Use str as default
+ $return = $str;
+
+ // Is it empty?
+ if ((is_null($str)) || (trim($str) == '')) {
+ // Set it
+ $return = str_repeat('-', $num);
+ } // END - if
+
+ // Return final string
+ return $return;
+}
+
+// Handles the braces [] of a field (e.g. value of 'name' attribute)
+function handleFieldWithBraces ($field) {
+ // Are there braces [] at the end?
+ if (substr($field, -2, 2) == '[]') {
+ // Try to find one and replace it. I do it this way to allow easy
+ // extending of this code.
+ foreach (array('admin_list_builder_id_value') as $key) {
+ // Is the cache entry set?
+ if (isset($GLOBALS[$key])) {
+ // Insert it
+ $field = str_replace('[]', '[' . $GLOBALS[$key] . ']', $field);
+
+ // And abort
+ break;
+ } // END - if
+ } // END - foreach
+ } // END - if
+
+ // Return it
+ return $field;
}
//////////////////////////////////////////////////
}
} // END - if
+if (!function_exists('http_build_query')) {
+ // Taken from documentation on www.php.net, credits to Marco K. (Germany) and some light mods by R.Haeder
+ function http_build_query($data, $prefix = '', $sep = '', $key = '') {
+ $ret = array();
+ foreach ((array)$data as $k => $v) {
+ if (is_int($k) && $prefix != null) {
+ $k = urlencode($prefix . $k);
+ } // END - if
+
+ if ((!empty($key)) || ($key === 0)) $k = $key . '[' . urlencode($k) . ']';
+
+ if (is_array($v) || is_object($v)) {
+ array_push($ret, http_build_query($v, '', $sep, $k));
+ } else {
+ array_push($ret, $k.'='.urlencode($v));
+ }
+ } // END - foreach
+
+ if (empty($sep)) $sep = ini_get('arg_separator.output');
+
+ return implode($sep, $ret);
+ }
+} // END - if
+
// [EOF]
?>
projects / mailer.git / blobdiff