* $Author:: $ *
* -------------------------------------------------------------------- *
* Copyright (c) 2003 - 2009 by Roland Haeder *
- * Copyright (c) 2009 - 2012 by Mailer Developer Team *
+ * Copyright (c) 2009 - 2013 by Mailer Developer Team *
* For more information visit: http://mxchange.org *
* *
* This program is free software; you can redistribute it and/or modify *
}
// Add a fatal error message to the queue array
-function addFatalMessage ($F, $L, $message, $extra = '') {
+function addFatalMessage ($file, $line, $message, $extra = '') {
if (is_array($extra)) {
// Multiple extras for a message with masks
$message = call_user_func_array('sprintf', $extra);
array_push($GLOBALS['fatal_messages'], $message);
// Log fatal messages away
- logDebugMessage($F, $L, 'Fatal error message: ' . compileCode($message));
+ logDebugMessage($file, $line, 'Fatal error message: ' . compileCode($message));
}
// Getter for total fatal message count
function getTotalFatalErrors () {
// Init count
- $count = '0';
+ $count = 0;
// Is there at least the first entry?
if (!empty($GLOBALS['fatal_messages'][0])) {
// Get total count
$count = count($GLOBALS['fatal_messages']);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'count=' . $count . ' - FROM ARRAY');
} // END - if
// Return value
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'count=' . $count . ' - EXIT!');
return $count;
}
// Generate a password in a specified length or use default password length
-function generatePassword ($length = '0', $exclude = array()) {
+function generatePassword ($length = '0', $exclude = array()) {
// Auto-fix invalid length of zero
if ($length == '0') {
$length = getPassLen();
// Exclude some entries
$localAbc = array_diff($GLOBALS['_abc'], $exclude);
+ // $localAbc must have at least 10 entries
+ assert(count($localAbc) >= 10);
+
// Start creating password
$password = '';
while (strlen($password) < $length) {
return $GLOBALS[__FUNCTION__][$yn];
}
+// "Translates" Y/N into "de-/active"
+function translateActivationStatus ($status) {
+ // Is it cached?
+ if (!isset($GLOBALS[__FUNCTION__][$status])) {
+ // Default
+ $GLOBALS[__FUNCTION__][$status] = '??? (' . $status . ')';
+ switch ($status) {
+ case 'Y': $GLOBALS[__FUNCTION__][$status] = '{--ACTIVATED--}'; break;
+ case 'N': $GLOBALS[__FUNCTION__][$status] = '{--DEACTIVATED--}'; break;
+ default:
+ // Log unknown value
+ logDebugMessage(__FUNCTION__, __LINE__, sprintf("Unknown value %s. Expected: Y/N", $status));
+ break;
+ } // END - switch
+ } // END - if
+
+ // Return it
+ return $GLOBALS[__FUNCTION__][$status];
+}
+
// Translates the american decimal dot into a german comma
// OPPOMENT: convertCommaToDot()
function translateComma ($dotted, $cut = TRUE, $max = '0') {
// Generates an URL for the dereferer
function generateDereferrerUrl ($url) {
// Don't de-refer our own links!
- if (substr($url, 0, strlen(getUrl())) != getUrl()) {
+ if ((!empty($url)) && (substr($url, 0, strlen(getUrl())) != getUrl())) {
// Encode URL
$encodedUrl = encodeString(compileUriCode($url));
- // Log plain URL
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'url=' . $url);
+ // Generate hash
+ $hash = generateHash($url . getSiteKey() . getDateKey());
+
+ // Log plain URL and hash
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'url=' . $url . ',hash=' . $hash . '(' . strlen($hash) . ')');
// De-refer this URL
- $url = '{%url=modules.php?module=loader&url=' . $encodedUrl . '&hash=' . encodeHashForCookie(generateHash($url . getSiteKey() . getDateKey())) . '%}';
+ $url = '{%url=modules.php?module=loader&url=' . $encodedUrl . '&hash=' . encodeHashForCookie($hash) . '&salt=' . substr($hash, 0, getSaltLength()) . '%}';
} // END - if
// Return link
} elseif ($key != $key2) {
// Sort numbers (E.g.: 9 < 10)
if (($temporaryArray[$a_sort[$primary_key]][$key] < $temporaryArray[$a_sort[$primary_key]][$key2]) && ($order == -1)) $match = TRUE;
- if (($temporaryArray[$a_sort[$primary_key]][$key] > $temporaryArray[$a_sort[$primary_key]][$key2]) && ($order == 1)) $match = TRUE;
+ if (($temporaryArray[$a_sort[$primary_key]][$key] > $temporaryArray[$a_sort[$primary_key]][$key2]) && ($order == 1)) $match = TRUE;
}
if ($match) {
$M1 = getMonth();
// If so and if current time is before 02/29 and estimated time is after 02/29 then add 86400 seconds (one day)
- if ((floor($TEST) == $TEST) && ($M1 == '02') && ($postData[$prefix . '_mo'] > '02')) {
+ // 01 2 2 1 1 1 123 4 43 3 32 233 4 43 3 3210
+ if ((floor($TEST) == $TEST) && ($M1 == '02') && (((isset($postData[$prefix . '_mo'])) && ($postData[$prefix . '_mo'] > '02')) || ((isset($postData[$prefix . '_mn'])) && ($postData[$prefix . '_mn'] > '02')))) {
$SWITCH = getOneDay();
} // END - if
$ret += $postData[$prefix . '_ye'] * (31536000 + $SWITCH);
// Next months...
- $ret += $postData[$prefix . '_mo'] * 2628000;
+ if (isset($postData[$prefix . '_mo'])) {
+ $ret += $postData[$prefix . '_mo'] * 2628000;
+ } elseif (isset($postData[$prefix . '_mn'])) {
+ $ret += $postData[$prefix . '_mn'] * 2628000;
+ }
// Next weeks
$ret += $postData[$prefix . '_we'] * 604800;
} // END - foreach
// Is something there?
- if (strlen($ret) > 0) {
+ if (!empty($ret)) {
// Remove leading commata and space
$ret = substr($ret, 2);
} else {
// Generate a hash for extra-security for all passwords
function generateHash ($plainText, $salt = '', $hash = TRUE) {
// Debug output
- //* DEBUG: */ debugOutput('plainText('.strlen($plainText).')=' . $plainText . ',salt('.strlen($salt).')=' . $salt . ',hash=' . intval($hash));
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'plainText('.strlen($plainText).')=' . $plainText . ',salt('.strlen($salt).')=' . $salt . ',hash=' . intval($hash));
// Is the required extension 'sql_patches' there and a salt is not given?
// 123 4 43 3 4 432 2 3 32 2 3 32 2 3 3 21
// Generate SHA1 sum from modula of number and the prime number
$sha1 = sha1(($a % getPrime()) . $server . getEncryptSeparator() . $keys . getEncryptSeparator() . $data . getEncryptSeparator() . getDateKey() . getEncryptSeparator() . $a);
- //* DEBUG: */ debugOutput('SHA1=' . $sha1.' ('.strlen($sha1).')<br />');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'SHA1=' . $sha1.' ('.strlen($sha1).')');
$sha1 = scrambleString($sha1);
- //* DEBUG: */ debugOutput('Scrambled=' . $sha1.' ('.strlen($sha1).')<br />');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'Scrambled=' . $sha1.' ('.strlen($sha1).')');
//* DEBUG: */ $sha1b = descrambleString($sha1);
- //* DEBUG: */ debugOutput('Descrambled=' . $sha1b.' ('.strlen($sha1b).')<br />');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'Descrambled=' . $sha1b.' ('.strlen($sha1b).')');
// Generate the password salt string
$salt = substr($sha1, 0, getSaltLength());
- //* DEBUG: */ debugOutput($salt.' ('.strlen($salt).')<br />');
+ //* DEBUG: */ debugOutput($salt.' ('.strlen($salt).')');
} else {
// Use given salt
- //* DEBUG: */ debugOutput('salt=' . $salt);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'salt=' . $salt);
$salt = substr($salt, 0, getSaltLength());
- //* DEBUG: */ debugOutput('salt=' . $salt . '(' . strlen($salt) . '/' . getSaltLength() . ')<br />');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'salt=' . $salt . '(' . strlen($salt) . '/' . getSaltLength() . ')');
// Sanity check on salt
if (strlen($salt) != getSaltLength()) {
$finalHash = $salt . sha1($salt . $plainText);
// Debug output
- //* DEBUG: */ debugOutput('finalHash('.strlen($finalHash).')=' . $finalHash);
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'finalHash('.strlen($finalHash).')=' . $finalHash);
// Return hash
return $finalHash;
}
// Compare both lengths and abort if different
- if (strlen($str) != count($scrambleNums)) return $str;
+ if (strlen($str) != count($scrambleNums)) {
+ return $str;
+ } // END - if
// Scramble string here
//* DEBUG: */ debugOutput('***Original=' . $str.'***<br />');
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '/' . strlen(getSecretKey()));
if ((strlen($passHash) != 49) || (strlen(getSecretKey()) != 40)) {
// Both keys must have same length so return unencrypted
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '!=49/' . strlen(getSecretKey()) . '!=40');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, strlen($passHash) . '!=49/' . strlen(getSecretKey()) . '!=40 - EXIT!');
return $ret;
} // END - if
$newHash = ''; $start = 9;
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'passHash=' . $passHash . '(' . strlen($passHash) . ')');
for ($idx = 0; $idx < 20; $idx++) {
- $part1 = hexdec(substr($passHash, ($idx * 2) + (strlen($passHash) - strlen(getSecretKey())), 2));
+ // Get hash parts and convert them (00-FF) to matching ASCII value (0-255)
+ $part1 = hexdec(substr($passHash , $start, 2));
$part2 = hexdec(substr(getSecretKey(), $start, 2));
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2);
+
+ // Default is hexadecimal of index if both are same
$mod = dechex($idx);
+ // Is part1 larger or part2 than its counter part?
if ($part1 > $part2) {
+ // part1 is larger
$mod = dechex(sqrt(($part1 - $part2) * getPrime() / pi()));
} elseif ($part2 > $part1) {
+ // part2 is larger
$mod = dechex(sqrt(($part2 - $part1) * getPrime() / pi()));
}
+
$mod = substr($mod, 0, 2);
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'part1=' . $part1 . '/part2=' . $part2 . '/mod=' . $mod . '(' . strlen($mod) . ')');
- $mod = str_repeat(0, (2 - strlen($mod))) . $mod;
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'idx=' . $idx . ',part1=' . $part1 . '/part2=' . $part2 . '/mod=' . $mod . '(' . strlen($mod) . ')');
+ $mod = padLeftZero($mod);
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'mod(' . ($idx * 2) . ')=' . $mod . '*');
$start += 2;
$newHash .= $mod;
} // END - for
// Just copy it over, as the master salt is not really helpful here
- //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, $passHash . ',' . $newHash . ' (' . strlen($newHash) . ')');
+ //* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, $passHash . '(' . strlen($passHash) . '),' . $newHash . ' (' . strlen($newHash) . ')');
$ret = $newHash;
} // END - if
break;
case getCode('URL_TIME_LOCK'):
- // @TODO Move this SQL code into a function, let's say 'getTimestampFromPoolId($id) ?
- $result = SQL_QUERY_ESC("SELECT `timestamp` FROM `{?_MYSQL_PREFIX?}_pool` WHERE `id`=%s LIMIT 1",
- array(bigintval(getRequestElement('id'))), __FUNCTION__, __LINE__);
-
// Load timestamp from last order
- $content = SQL_FETCHARRAY($result);
-
- // Free memory
- SQL_FREERESULT($result);
+ $content = getPoolDataFromId(getRequestElement('id'));
// Translate it for templates
$content['timestamp'] = generateDateTime($content['timestamp'], 1);
// Wtites data to a config.php-style file
// @TODO Rewrite this function to use readFromFile() and writeToFile()
-function changeDataInFile ($FQFN, $comment, $prefix, $suffix, $inserted, $seek=0) {
+function changeDataInFile ($FQFN, $comment, $prefix, $suffix, $inserted, $seek = 0) {
// Initialize some variables
$done = FALSE;
$seek++;
// Start reading
while (!feof($fp)) {
// Read from source file
- $line = fgets ($fp, 1024);
+ $line = fgets($fp, 1024);
if (isInString($search, $line)) {
$next = '0';
if ($next > -1) {
if ($next === $seek) {
$next = -1;
- $line = $prefix . $inserted . $suffix . chr(10);
+ $line = $prefix . $inserted . $suffix . PHP_EOL;
} else {
$next++;
}
fclose($fp);
if (($done === TRUE) && ($found === TRUE)) {
- // Copy back tmp file and delete tmp :-)
+ // Copy back temporary->FQFN file and ...
copyFileVerified($tmp, $FQFN, 0644);
+
+ // ... delete temporay file :-)
return removeFile($tmp);
} elseif ($found === FALSE) {
- outputHtml('<strong>CHANGE:</strong> 404!');
+ // Entry not found
+ logDebugMessage(__FUNCTION__, __LINE__, 'File ' . basename($FQFN) . ' cannot be changed: comment=' . $comment . ',prefix=' . $prefix . ',inserted=' . $inserted . ',seek=' . $seek . ' - 404!');
} else {
- outputHtml('<strong>TMP:</strong> UNDONE!');
+ // Temporary file not fully written
+ logDebugMessage(__FUNCTION__, __LINE__, 'File ' . basename($FQFN) . ' cannot be changed: comment=' . $comment . ',prefix=' . $prefix . ',inserted=' . $inserted . ',seek=' . $seek . ' - Temporary file unfinished!');
}
}
} else {
// File not found, not readable or writeable
- reportBug(__FUNCTION__, __LINE__, 'File not readable/writeable. file=' . basename($FQFN));
+ reportBug(__FUNCTION__, __LINE__, 'File not readable/writeable. file=' . basename($FQFN) . ',comment=' . $comment . ',prefix=' . $prefix . ',inserted=' . $inserted . ',seek=' . $seek);
}
// An error was detected!
// Is debug mode enabled?
if ((isDebugModeEnabled()) || ($force === TRUE)) {
// Remove CRLF
- $message = str_replace(array(chr(13), chr(10)), array('', ''), $message);
+ $message = str_replace(array(chr(13), PHP_EOL), array('', ''), $message);
// Log this message away
- appendLineToFile(getPath() . getCachePath() . 'debug.log', generateDateTime(time(), '4') . '|' . getModule(FALSE) . '|' . basename($funcFile) . '|' . $line . '|' . $message);
+ appendLineToFile(getPath() . getCachePath() . 'debug.log', generateDateTime(time(), '4') . '|' . getModule(FALSE) . ':' . getExtraModule() . '|' . basename($funcFile) . '|' . $line . '|' . $message);
} // END - if
}
}
// Tries to determine if call-back functions and/or extra values shall be parsed
-function doHandleExtraValues ($filterFunctions, $extraValues, $key, $entries, $userIdColumn, $search) {
- // Debug message
- /* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'key=' . $key . ',entries=' . $entries . ',userIdColumn=' . $userIdColumn[0] . ',search=' . $search . ',filterFunctions=' . print_r($filterFunctions, TRUE) . ',extraValues=' . print_r($extraValues, TRUE));
+function doHandleExtraValues ($filterFunctions, $extraValues, $key, $entries, $userIdColumn, $search, $id = NULL) {
+ // Debug mode enabled?
+ if (isDebugModeEnabled()) {
+ // Debug message
+ /* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'key=' . $key . ',entries=' . $entries . ',userIdColumn=' . $userIdColumn[0] . ',search=' . $search . ',filterFunctions=' . print_r($filterFunctions, TRUE) . ',extraValues=' . print_r($extraValues, TRUE));
+ } // END - if
// Send data through the filter function if found
- if ($key == $userIdColumn[0]) {
+ if ($key === $userIdColumn[0]) {
// Is the userid, we have to process it with convertZeroToNull()
$entries = convertZeroToNull($entries);
} elseif ((!empty($filterFunctions[$key])) && (isset($extraValues[$key]))) {
// Debug mode enabled?
if (isDebugModeEnabled()) {
// Then log it
- /* NOISY-DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'search=' . $search . ',filterFunctions=' . $filterFunctions[$search] . ',extraValues=' . $extraValues[$key] . ',key=' . $key . ',id=' . $id . ',entries[' . gettype($entries) . ']=' . $entries . ' - BEFORE!');
+ /* NOISY-DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'search=' . $search . ',filterFunctions=' . $filterFunctions[$key] . ',extraValues=' . $extraValues[$key] . ',key=' . $key . ',id=' . $id . ',entries[' . gettype($entries) . ']=' . $entries . ' - BEFORE!');
} // END - if
// Filter function + extra value set
// Debug mode enabled?
if (isDebugModeEnabled()) {
// Then log it
- /* NOISY-DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'search=' . $search . ',filterFunctions=' . $filterFunctions[$search] . ',extraValues=' . $extraValues[$key] . ',key=' . $key . ',id=' . $id . ',entries[' . gettype($entries) . ']=' . $entries . ' - AFTER!');
+ /* NOISY-DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'search=' . $search . ',filterFunctions=' . $filterFunctions[$key] . ',extraValues=' . $extraValues[$key] . ',key=' . $key . ',id=' . $id . ',entries[' . gettype($entries) . ']=' . $entries . ' - AFTER!');
+ } // END - if
+ } elseif ((!empty($filterFunctions[$search])) && (!empty($extraValues[$search]))) {
+ // Debug mode enabled?
+ if (isDebugModeEnabled()) {
+ // Then log it
+ /* NOISY-DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'search=' . $search . ',filterFunctions=' . $filterFunctions[$search] . ',key=' . $key . ',search=' . $search . ',entries[' . gettype($entries) . ']=' . $entries . ' - BEFORE!');
} // END - if
+
+ // Handle extra values
+ $entries = handleExtraValues($filterFunctions[$search], $entries, $extraValues[$search]);
+
+ // Debug mode enabled?
+ if (isDebugModeEnabled()) {
+ // Then log it
+ /* NOISY-DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'search=' . $search . ',filterFunctions=' . $filterFunctions[$search] . ',key=' . $key . ',search=' . $search . ',entries[' . gettype($entries) . ']=' . $entries . ' - AFTER!');
+ } // END - if
+
+ // Make sure entries is not bool, then something went wrong
+ assert(!is_bool($entries));
} elseif (!empty($filterFunctions[$search])) {
// Debug mode enabled?
if (isDebugModeEnabled()) {
$test = substr($id, -3);
// Improved way of checking! :-)
- if (in_array($test, array('_ye', '_mo', '_we', '_da', '_ho', '_mi', '_se'))) {
+ if (in_array($test, array('_ye', '_mo', '_mn', '_we', '_da', '_ho', '_mi', '_se'))) {
// Found a multi-selection for timings?
$test = substr($id, 0, -3);
- if ((isset($postData[$test . '_ye'])) && (isset($postData[$test . '_mo'])) && (isset($postData[$test . '_we'])) && (isset($postData[$test . '_da'])) && (isset($postData[$test . '_ho'])) && (isset($postData[$test . '_mi'])) && (isset($postData[$test . '_se'])) && ($test != $test2)) {
+ if ((isset($postData[$test . '_ye'])) && ((isset($postData[$test . '_mo'])) || (isset($postData[$test . '_mn']))) && (isset($postData[$test . '_we'])) && (isset($postData[$test . '_da'])) && (isset($postData[$test . '_ho'])) && (isset($postData[$test . '_mi'])) && (isset($postData[$test . '_se'])) && ($test != $test2)) {
// Generate timestamp
$postData[$test] = createEpocheTimeFromSelections($test, $postData);
array_push($content, sprintf("`%s`='%s'", $test, $postData[$test]));
$GLOBALS['skip_config'][$test] = TRUE;
// Remove data from array
- foreach (array('ye', 'mo', 'we', 'da', 'ho', 'mi', 'se') as $rem) {
+ foreach (array('ye', 'mo', 'mn', 'we', 'da', 'ho', 'mi', 'se') as $rem) {
unset($postData[$test . '_' . $rem]);
} // END - foreach
$str = str_replace('.', '', $str);
// Replace german commata with decimal dot and cast it
- $float = (float) str_replace(',', '.', $str);
+ $float = sprintf(getConfig('FLOAT_MASK'), str_replace(',', '.', $str));
break;
default: // US and so on
// Remove thousand commatas first and cast
- $float = (float) str_replace(',', '', $str);
+ $float = sprintf(getConfig('FLOAT_MASK'), str_replace(',', '', $str));
break;
} // END - switch
// Shall I remove the cache file?
if ((isExtensionInstalled('cache')) && (isCacheInstanceValid()) && (isHtmlOutputMode())) {
// Rebuild cache only in HTML output-mode
+ // @TODO This should be rewritten not to load the cache file for just checking if it is there for save removal.
if ($GLOBALS['cache_instance']->loadCacheFile($cache)) {
// Destroy it
$GLOBALS['cache_instance']->removeCacheFile($force);
}
}
-// Enables the reset mode and runs it
-function doReset () {
- // Enable the reset mode
- $GLOBALS['reset_enabled'] = TRUE;
-
- // Run filters
- runFilterChain('reset');
-}
-
-// Enables the reset mode (hourly, weekly and monthly) and runs it
+// Enables the hourly reset mode and runs it
function doHourly () {
// Enable the hourly reset mode
$GLOBALS['hourly_enabled'] = TRUE;
// Run filters (one always!)
runFilterChain('hourly');
+
+ // Do not update in hourly debug mode
+ if ((!isConfigEntrySet('DEBUG_HOURLY')) || (!isDebugHourlyEnabled())) {
+ // Update database
+ updateConfiguration('last_hourly', getHour());
+ } // END - if
+}
+
+// Enables the daily reset mode and runs it
+function doDaily () {
+ // Enable the reset mode
+ $GLOBALS['daily_enabled'] = TRUE;
+
+ // Run filters
+ runFilterChain('daily');
+
+ // Do not update in daily debug mode
+ if ((!isConfigEntrySet('DEBUG_DAILY')) || (!isDebugDailyEnabled())) {
+ // Update database
+ updateConfiguration('last_daily', getDay());
+ } // END - if
+}
+
+// Enables the weekly reset mode and runs it
+function doWeekly () {
+ // Enable the reset mode
+ $GLOBALS['weekly_enabled'] = TRUE;
+
+ // Run filters
+ runFilterChain('weekly');
+
+ // Do not update in weekly debug mode
+ if ((!isConfigEntrySet('DEBUG_WEEKLY')) || (!isDebugWeeklyEnabled())) {
+ // Update database
+ updateConfiguration('last_weekly', getWeek());
+ } // END - if
+}
+
+// Enables the monthly reset mode and runs it
+function doMonthly () {
+ // Enable the reset mode
+ $GLOBALS['monthly_enabled'] = TRUE;
+
+ // Run filters
+ runFilterChain('monthly');
+
+ // Do not update in monthly debug mode
+ if ((!isConfigEntrySet('DEBUG_MONTHLY')) || (!isDebugMonthlyEnabled())) {
+ // Update database
+ updateConfiguration('last_monthly', getMonth());
+ } // END - if
}
// Shuts down the mailer (e.g. closing database link, flushing output/filters, etc.)
// Call the filter chain 'shutdown'
runFilterChain('shutdown', NULL);
- // Check if not in installation phase and the link is up
- if ((!isInstallationPhase()) && (SQL_IS_LINK_UP())) {
+ // Check if link is up
+ if (isSqlLinkUp()) {
// Close link
- SQL_CLOSE(__FUNCTION__, __LINE__);
+ sqlCloseLink(__FUNCTION__, __LINE__);
} elseif (!isInstallationPhase()) {
// No database link
reportBug(__FUNCTION__, __LINE__, 'Database link is already down, while shutdown is running.');
}
// Setter for member id
-function setMemberId ($memberid) {
+function setMemberId ($memberId) {
// We should not set member id to zero
- if ($memberid == '0') {
+ if (!isValidId($memberId)) {
reportBug(__FUNCTION__, __LINE__, 'Userid should not be set zero.');
} // END - if
// Set it secured
- $GLOBALS['member_id'] = bigintval($memberid);
+ $GLOBALS['member_id'] = bigintval($memberId);
}
// Getter for member id or returns zero
function getMemberId () {
// Default member id
- $memberid = '0';
+ $memberId = '0';
// Is the member id set?
if (isMemberIdSet()) {
// Then use it
- $memberid = $GLOBALS['member_id'];
+ $memberId = $GLOBALS['member_id'];
} // END - if
// Return it
- return $memberid;
+ return $memberId;
}
// Checks ether the member id is set
* @param $excludePattern Regular expression to exclude more files (preg_match())
* @param $recursive whether to scan recursively
* @param $suffix Suffix for positive matches ($extension will be appended, too)
+ * @param $withPrefixSuffix Whether to include prefix/suffix in found entries
* @return $foundMatches All found positive matches for above criteria
*/
-function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = FALSE, $addBaseDir = TRUE, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = TRUE, $suffix = '') {
+function getArrayFromDirectory ($baseDir, $prefix, $fileIncludeDirs = FALSE, $addBaseDir = TRUE, $excludeArray = array(), $extension = '.php', $excludePattern = '@(\.|\.\.)$@', $recursive = TRUE, $suffix = '', $withPrefixSuffix = TRUE) {
// Add default entries we should always exclude
array_unshift($excludeArray, '.', '..', '.svn', '.htaccess');
if ($addBaseDir === TRUE) {
// With base path
array_push($foundMatches, $fileName);
+ } elseif ($withPrefixSuffix === FALSE) {
+ // No prefix/suffix
+ array_push($foundMatches, substr($baseFile, strlen($prefix), -strlen($suffix . $extension)));
} else {
// No base path
array_push($foundMatches, $baseFile);
// We found .php file but should not search for them, why?
reportBug(__FUNCTION__, __LINE__, 'We should find files with extension=' . $extension . ', but we found a PHP script. (baseFile=' . $baseFile . ')');
}
- } elseif ($fileExtension == $extension) {
+ } elseif (($fileExtension == $extension) || (empty($extension))) {
// Other, generic file found
array_push($foundMatches, $fileName);
}
// Map only these, still lame code...
switch ($moduleName) {
case 'index': // 'index' is the guest's menu
- $moduleName = 'guest';
+ $moduleName = 'guest';
break;
case 'login': // ... and 'login' the member's menu
$moduleName = 'member';
break;
-
// Anything else will not be mapped, silently.
} // END - switch
}
// Add SQL debug data to array for later output
-function addSqlToDebug ($result, $sqlString, $timing, $F, $L) {
+function addSqlToDebug ($result, $sqlString, $timing, $file, $line) {
// Is there cache?
if (!isset($GLOBALS['debug_sql_available'])) {
// Check it and cache it in $GLOBALS
$GLOBALS['debug_sql_available'] = ((isConfigurationLoaded()) && (isDisplayDebugSqlEnabled()));
} // END - if
-
+
// Don't execute anything here if we don't need or ext-other is missing
if ($GLOBALS['debug_sql_available'] === FALSE) {
return;
} // END - if
// Already executed?
- if (isset($GLOBALS['debug_sqls'][$F][$L][$sqlString])) {
+ if (isset($GLOBALS['debug_sqls'][$file][$line][$sqlString])) {
// Then abort here, we don't need to profile a query twice
return;
} // END - if
// Remeber this as profiled (or not, but we don't care here)
- $GLOBALS['debug_sqls'][$F][$L][$sqlString] = TRUE;
+ $GLOBALS['debug_sqls'][$file][$line][$sqlString] = TRUE;
// Generate record
$record = array(
- 'num_rows' => SQL_NUMROWS($result),
- 'affected' => SQL_AFFECTEDROWS(),
+ 'num_rows' => sqlNumRows($result),
+ 'affected' => sqlAffectedRows(),
'sql_str' => $sqlString,
'timing' => $timing,
- 'file' => basename($F),
- 'line' => $L
+ 'file' => basename($file),
+ 'line' => $line
);
// Add it
} // END - if
// Is there a valid session?
- if (((!isset($GLOBALS['valid_session'])) || ($GLOBALS['valid_session'] === FALSE) || (!isset($_COOKIE[session_name()]))) && (isSpider() === FALSE)) {
+ if ((!isSessionValid()) && (!isSpider())) {
// Determine right separator
$separator = '&';
if (!isInString('?', $url)) {
$separator = '?';
} // END - if
- // Is the session id set?
- if (session_id() != '') {
- // Then add it to URL
- $url .= $separator . session_name() . '=' . session_id();
- } // END - if
+ // Then add it to URL
+ $url .= $separator . session_name() . '=' . session_id();
} // END - if
// Add {?URL?} ?
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'url=' . $url . ',isHtmlOutputMode()=' . intval(isHtmlOutputMode()) . ',outputMode=' . $outputMode);
// Is there to decode entities?
- if ((!isHtmlOutputMode()) || ($outputMode != '0')) {
+ if (!isHtmlOutputMode()) {
//* DEBUG: */ logDebugMessage(__FUNCTION__, __LINE__, 'url=' . $url . ' - BEFORE DECODING');
// Decode them for e.g. JavaScript parts
$url = decodeEntities($url);
return $number;
}
-// Converts a NULL to zero
+// Converts a NULL|empty string|< 1 to zero
function convertNullToZero ($number) {
// Is it a valid username?
- if ((!is_null($number)) && (!empty($number)) && ($number > 0)) {
- // Always secure it
- $number = bigintval($number);
- } else {
+ if ((is_null($number)) || (empty($number)) || ($number < 1)) {
// Is not valid or zero
$number = '0';
- }
+ } // END - if
// Return it
return $number;
}
// Generate admin links for mail order
-// mailType can be: 'mid' or 'bid'
+// mailType can be: 'normal' or 'bonus'
function generateAdminMailLinks ($mailType, $mailId) {
// Init variables
$OUT = '';
// Which mail do we have?
switch ($mailType) {
- case 'bid': // Bonus mail
+ case 'bonus': // Bonus mail
$table = 'bonus';
break;
- case 'mid': // Member mail
+ case 'normal': // Member mail
$table = 'pool';
break;
// Is the mail type supported?
if (!empty($table)) {
// Query for the mail
- $result = SQL_QUERY_ESC("SELECT `id`, `%s` AS `mail_status` FROM `{?_MYSQL_PREFIX?}_%s` WHERE `id`=%s LIMIT 1",
+ $result = sqlQueryEscaped("SELECT `id`, `%s` AS `mail_status` FROM `{?_MYSQL_PREFIX?}_%s` WHERE `id`=%s LIMIT 1",
array(
$statusColumn,
$table,
), __FILE__, __LINE__);
// Is there one entry there?
- if (SQL_NUMROWS($result) == 1) {
+ if (sqlNumRows($result) == 1) {
// Load the entry
- $content = SQL_FETCHARRAY($result);
+ $content = sqlFetchArray($result);
// Add output and type
$content['type'] = $mailType;
} // END - if
// Free result
- SQL_FREERESULT($result);
+ sqlFreeResult($result);
} // END - if
// Return generated HTML code
}
/**
- * Replace chr(13) with "[r]" and chr(10) with "[n]" and add a final new-line to make
+ * Replace chr(13) with "[r]" and PHP_EOL with "[n]" and add a final new-line to make
* them visible to the developer. Use this function to debug e.g. buggy HTTP
* response handler functions.
*
} // END - if
// Determine it
- $GLOBALS[__FUNCTION__][$str] = (($strTrimmed == 'true') ? true : false);
+ $GLOBALS[__FUNCTION__][$str] = ($strTrimmed == 'true');
} // END - if
// Return cache
doGenericAddEntries($tableName, $columns, $filterFunctions, $extraValues, $timeColumns, $columnIndex);
// Entry has been added?
- if ((!SQL_HASZEROAFFECTED()) && ($GLOBALS['__XML_PARSE_RESULT'] === TRUE)) {
+ if ((!ifSqlHasZeroAffectedRows()) && ($GLOBALS['__XML_PARSE_RESULT'] === TRUE)) {
// Display success message
displayMessage('{--MEMBER_ENTRY_ADDED--}');
} else {
}
// Edit rows by given id numbers
-function memberEditEntriesConfirm ($tableName, $columns = array(), $filterFunctions = array(), $extraValues = array(), $timeColumns = array(), $editNow = array(FALSE), $idColumn = array('id'), $userIdColumn = array('userid'), $rawUserId = array('userid'), $cacheFiles = array()) {
+function memberEditEntriesConfirm ($tableName, $columns = array(), $filterFunctions = array(), $extraValues = array(), $timeColumns = array(), $editNow = array(FALSE), $idColumn = array('id'), $userIdColumn = array('userid'), $rawUserId = array('userid'), $cacheFiles = array(), $content = array()) {
// $tableName must be an array
if ((!is_array($tableName)) || (count($tableName) != 1)) {
// No tableName specified
}
} else {
// List for editing
- memberListBuilder('edit', $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn);
+ memberListBuilder('edit', $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn, $rawUserId, $content);
}
}
// Delete rows by given id numbers
-function memberDeleteEntriesConfirm ($tableName, $columns = array(), $filterFunctions = array(), $extraValues = array(), $deleteNow = array(FALSE), $idColumn = array('id'), $userIdColumn = array('userid'), $rawUserId = array('userid'), $cacheFiles = array()) {
+function memberDeleteEntriesConfirm ($tableName, $columns = array(), $filterFunctions = array(), $extraValues = array(), $deleteNow = array(FALSE), $idColumn = array('id'), $userIdColumn = array('userid'), $rawUserId = array('userid'), $cacheFiles = array(), $content = array()) {
// Do this only for members
assert(isMember());
displayMessage('{--MEMBER_ALL_ENTRIES_REMOVED--}');
} else {
// Some are still there :(
- displayMessage(sprintf(getMessage('MEMBER_SOME_ENTRIES_NOT_DELETED'), SQL_AFFECTEDROWS(), countPostSelection($idColumn[0])));
+ displayMessage(sprintf(getMessage('MEMBER_SOME_ENTRIES_NOT_DELETED'), sqlAffectedRows(), countPostSelection($idColumn[0])));
}
} else {
// List for deletion confirmation
- memberListBuilder('delete', $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn);
+ memberListBuilder('delete', $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn, $rawUSerId, $content);
}
}
// Build a special template list
-function memberListBuilder ($listType, $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn, $rawUserId = array('userid')) {
+// @TODO cacheFiles is not yet supported
+function memberListBuilder ($listType, $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn, $rawUserId = array('userid'), $content = array()) {
// Do this only for logged in member
assert(isMember());
// Call inner (general) function
- doGenericListBuilder('member', $listType, $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn, $rawUserId);
+ doGenericListBuilder('member', $listType, $tableName, $columns, $filterFunctions, $extraValues, $idColumn, $userIdColumn, $rawUserId, $content);
}
// Checks whether given address is IPv4
return $str;
}
+// "Getter" for seconds from given time unit
+function getSecondsFromTimeUnit ($timeUnit) {
+ // Default is not found
+ $seconds = NULL;
+
+ // "Detect" it
+ switch ($timeUnit) {
+ case 's': // Seconds = 1
+ $seconds = 1;
+ break;
+
+ case 'm': // Minutes
+ $seconds = 60;
+ break;
+
+ case 'h': // Hours
+ $seconds = 60*60;
+ break;
+
+ case 'D': // Days
+ $seconds = 60*60*24;
+ break;
+
+ case 'W': // Weeks
+ $seconds = 60*60*24*7;
+ break;
+
+ default: // Unsupported
+ reportBug(__FUNCTION__, __LINE__, 'Unsupported time unit ' . $timeUnit . ' detected.');
+ break;
+ } // END - switch
+
+ // Return value
+ return $seconds;
+}
+
+// Calulates value for given seconds and time unit
+function caluculateTimeUnitValue ($seconds, $timeUnit) {
+ // Calculate it
+ return ($seconds / getSecondsFromTimeUnit($timeUnit));
+}
+
+// "Getter" for an array from given one but only one index of it
+function getArrayFromArrayIndex ($array, $key) {
+ // Some simple validation
+ assert(isset($array[0][$key]));
+
+ // Init new array
+ $newArray = array();
+
+ // "Walk" through all elements
+ foreach ($array as $element) {
+ $newArray[] = $element[$key];
+ } // END - if
+
+ // Return it
+ return $newArray;
+}
+
+/**
+ * Compress given data and encodes it into BASE64 to be stored in database with
+ * sqlQueryEscaped()
+ *
+ * @param $data Data to be compressed and encoded
+ * @return $data Compressed+encoded data
+ */
+function compress ($data) {
+ // Compress it
+ return base64_encode(gzcompress($data));
+}
+
+/**
+ * Decompress given data previously compressed with compress().
+ *
+ * @param $data Data compressed with compress()
+ * @reurn $data Uncompressed data
+ */
+function decompress ($data) {
+ // Decompress it
+ return gzuncompress(base64_decode($data));
+}
+
+/**
+ * Converts given charset in given string to UTF-8 if not UTF-8. This function
+ * is currently limited to iconv().
+ *
+ * @param $str String to convert charset in
+ * @param $charset Charset to convert from
+ * @return $str Converted string
+ */
+function convertCharsetToUtf8 ($str, $charset) {
+ // Is iconv() available?
+ if (!function_exists('iconv')) {
+ // Please make it sure
+ reportBug(__FUNCTION__, __LINE__, 'PHP function iconv() is currently required to do charset convertion.');
+ } // END - if
+
+ // Is the charset not UTF-8?
+ if (strtoupper($charset) != 'UTF-8') {
+ // Convert it to UTF-8
+ $str = iconv(strtoupper($charset), 'UTF-8//TRANSLIT', $str);
+ } // END - if
+
+ // Return converted string
+ return $str;
+}
+
// ----------------------------------------------------------------------------
// "Translatation" functions for points_data table
// ----------------------------------------------------------------------------
// Translates generically some data into a target string
-function translateGeneric ($messagePrefix, $data) {
+function translateGeneric ($messagePrefix, $data, $messageSuffix = '') {
// Is the method null or empty?
if (is_null($data)) {
// Is NULL
} // END - if
// Default column name is unknown
- $return = '{%message,' . $messagePrefix . '_UNKNOWN=' . strtoupper($data) . '%}';
+ $return = '{%message,' . $messagePrefix . '_UNKNOWN' . $messageSuffix . '=' . strtoupper($data) . '%}';
// Construct message id
- $messageId = $messagePrefix . '_' . strtoupper($data);
+ $messageId = $messagePrefix . '_' . strtoupper($data) . $messageSuffix;
// Is it there?
if (isMessageIdValid($messageId)) {
return translateGeneric('ADMIN_TASK_TYPE', $taskType);
}
-//-----------------------------------------------------------------------------
-// Automatically re-created functions, all taken from user comments on www.php.net
-//-----------------------------------------------------------------------------
+// "Translates" task status to a human-readable version
+function translateTaskStatus ($taskStatus) {
+ // Return it
+ return translateGeneric('ADMIN_TASK_STATUS', $taskStatus);
+}
+
+/*
+ *-----------------------------------------------------------------------------
+ * Automatically re-created functions, all taken from user comments on
+ * www.php.net
+ *-----------------------------------------------------------------------------
+ */
if (!function_exists('html_entity_decode')) {
// Taken from documentation on www.php.net
function html_entity_decode ($string) {
projects / mailer.git / blobdiff