This method can be supported:
- isStackEmpty() can use getStackCount() and compare it with zero.

Signed-off-by: Roland Häder <roland@mxchange.org>

These methods may never be supported as initialization of file-based stacks does
currently not work.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added Registerable interface as the FileStackFactory is using it.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added Registerable interface as the FileStackFactory is using it.

Signed-off-by: Roland Häder <roland@mxchange.org>

Introduced validateFilePointer().

Signed-off-by: Roland Häder <roland@mxchange.org>

Always read file header.

Signed-off-by: Roland Häder <roland@mxchange.org>

It is readFileHeader().

Signed-off-by: Roland Häder <roland@mxchange.org>

More commented out.

Signed-off-by: Roland Häder <roland@mxchange.org>

Implemented rudely reading file header + commented out a lot noisy debug lines.

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed variable name ...

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed constant name.

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed parser error.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added read().

Signed-off-by: Roland Häder <roland@mxchange.org>

Add stuff for reading header of a file-based stack.

Signed-off-by: Roland Häder <roland@mxchange.org>

Introduced writeData() (low-level method).

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with hash-based stacks:
- added separator between count->seek position
- changed separators: chr(0) is for pre-allocation

Signed-off-by: Roland Häder <roland@mxchange.org>

Pre-allocate way more ...

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based stacks:
- used writeAtPosition() instead of seek()
- added debug line
- updated documentation

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed typo.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based stacks:
- implemented pre-allocation of the file (untested)
- renamed hashString() in BaseFrameworkSystem to hash() and made it static
- added static "getter" getHashLength() (this method's return value is "cached")

Signed-off-by: Roland Häder <roland@mxchange.org>

Added debug lines.

Signed-off-by: Roland Häder <roland@mxchange.org>

Removed asserts as they seem to be to hard and returned status code instead.

Signed-off-by: Roland Häder <roland@mxchange.org>

Much easier (but not reliable) test.

Signed-off-by: Roland Häder <roland@mxchange.org>

The 'c' mode will do the following:
- open file for writing (with + also for reading aka "random access mode")
- if file does not exist, create it
- if file exists, don't truncate (unlike 'w' does) and don't fail (unlike 'x'
  does).
- set seek position to beginning of file
- 'b' is for binary data

Signed-off-by: Roland Häder <roland@mxchange.org>

Renamed getPosition() -> getSeekPosition().

Signed-off-by: Roland Häder <roland@mxchange.org>

Typo fixed. ;-(

Signed-off-by: Roland Häder <roland@mxchange.org>

Opps, don't use instance here, file pointer is okay. ;-)

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed parser error.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based hash:
- added a lot stuff, such as getter/setter, seek(), rewind()
- moved class fields totalEntries and seekPosition to BaseFileStack

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based stacks:
- added flushFileHeader()
- still there will be a lot stub messages

Signed-off-by: Roland Häder <roland@mxchange.org>

Re-added them again ...

Signed-off-by: Roland Häder <roland@mxchange.org>

Moved to correct method.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added missing methods from Streamable interface.

Signed-off-by: Roland Häder <roland@mxchange.org>

Opps, had 2 Streamable interfaces ...

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file i/o:
- added saveStreamToFile() to IoHandler
- added saveFile() as unsupported method to FileIoHandler

Signed-off-by: Roland Häder <roland@mxchange.org>

Maybe more classes needs to have these methods (with thrown exception) as they
may implement any sub interface of Streamable. Please report any you can find.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based stacks and file i/o:
- added new interfaces (with some methods)
- added those methods to BaseFileIo so all implementations can have it. Still I
  need to find out if really all can e.g. seek.
- Used those new interfaces accordingly

Signed-off-by: Roland Häder <roland@mxchange.org>

Added new interfaces for file i/o classes.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued on file-based stack:
- renamed path file_stack -> file
- added (stubs) seek() and size()
- some improvements on format "documentation"

Signed-off-by: Roland Häder <roland@mxchange.org>

Added some class fields/attributes.

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed assertion.

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed type-hint (still no interface).

Signed-off-by: Roland Häder <roland@mxchange.org>

Mode must be 'a+b' (append, binary-safe).

Signed-off-by: Roland Häder <roland@mxchange.org>

Revert "Use realpath() to secure file and path names."

This reverts commit be3ab368cc0fc436205faf22c910c96a5937bf5e.

Use realpath() to secure file and path names.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued:
- added new (and missing) exception FileIsEmptyException
- renamed 'io' -> 'file_directory'.

Signed-off-by: Roland Häder <roland@mxchange.org>

Renamed initStack() -> initFileStack() in BaseFileStack + added initStack()
from BaseStacker to overwrite it.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based stacks:
- BaseFileStack now extends BaseStacker and overwrites some methods to have own implementations
- renamed 'io' to 'file_directory'

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed, opps.

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with loader and file i/o stuff:
- renamed interface to SeekableWritableFileIterator as this interface allows
  write operations (such calls are forwarded to the wrapped
  file_raw_input_output_pointer_class instance).
- Removed .svn from excepted paths as this won't be the case.

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed calling ObjectFactory::createObjectByConfiguredName() as 2nd parameter must be an array.

Signed-off-by: Roland Häder <roland@mxchange.org>

Check if path can be loadded before attempting it.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added scanApplicationClasses().

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued:
- added FileIoIterator class and rewrote BaseFileStack to use it.
- added BaseIterator class from 'hub' project.
- added SeekableFileIterator which extends SPLs SeekableIterator.
- assertion added for above interface to make sure that 'file_io_iterator'
  is a valid instance.

Signed-off-by: Roland Häder <roland@mxchange.org>

Initialize the file-based stack with initStack() where e.g. the file i/o
pointer instance can be set.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added fileName parameter.

Signed-off-by: Roland Häder <roland@mxchange.org>

Don't call the class' factory method directly, use ObjectFactory and
createObjectByConfiguredName() instead. This makes reimplementing classes much
easier.

Signed-off-by: Roland Häder <roland@mxchange.org>

Introduced scanFrameworkClasses().

Signed-off-by: Roland Häder <roland@mxchange.org>

Reverted some last changes + added FrameworkFileInputOutputPointer which allows reading and writing.

Signed-off-by: Roland Häder <roland@mxchange.org>

Rewrote both file i/o classes to have a common BaseFileIo class.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added explanation and improved format (idea).

Signed-off-by: Roland Häder <roland@mxchange.org>

Continued with file-based stacks:
- added first draft of file-based stacks (hash sums are missing)
- added initial base class and stub for file-based stacks
- ignored chash.pos (file created by chash.php)
- ignored any backup files (*.*~)

Signed-off-by: Roland Häder <roland@mxchange.org>

Fixed reading directories.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Commented out noisy debug lines.

Signed-off-by: Roland Häder <roland@mxchange.org>

Improved directory (non-recursive) reading:
- Refactured FrameworkDirectoryPointer to use DirectoryIterator (SPL).
- The use of isDot() makes excluding '.' and '..' obsolete (would be double),
  so more classes can be improved here.
- Also use ObjectFactory instead of direct class name for better flexibility.

Signed-off-by: Roland Häder <roland@mxchange.org>

Rewrites for client factory, added methods for HttpClient (mostly from ConsoleClient).

Signed-off-by: Roland Häder <roland@mxchange.org>

Added first client (HTTP) classes and interfaces for rewrite of the very simple methods in ConsoleTools and later for many places more.

Signed-off-by: Roland Häder <roland@mxchange.org>

Not the string again.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Round it... ;-)

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Use ZLIB compression.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Rewrote to $GLOBALS.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Added flushCheckPointFile().

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Add genesis hash.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Also remember found hashes (and all relevant data to "prove" it).

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Added check-point file.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Much smaller nonce means much more to calculate + logged it on success (found hash).

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Add all found hashes as "block hashes".

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Also display iterations per second.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Removed hashesPerBlock display + reduced blocked size as it is now much harder to find a good hash.
Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Correct hash rate calculation.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

This might be more correct calculation.

Signed-off-by: Roland Häder <haeder@hmmdeutschland.de>

Don't increment nonce after block was found, some other improvements, nonce increment is now 1.0 .

Signed-off-by: Roland Häder <roland@mxchange.org>

Taken care of possible usage of uninitialized variable $hashrate.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added a lot stuff + initial "block miner".

Signed-off-by: Roland Häder <roland@mxchange.org>

Some improvements to "genesis" hash.

Signed-off-by: Roland Häder <roland@mxchange.org>

Merge branch 'contrib'

Signed-off-by: Roland Häder <roland@mxchange.org>
Conflicts:
.gitattributes
.gitignore

Moved for merge preparation.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added translateBooleanToYesNo().

Signed-off-by: Roland Häder <roland@mxchange.org>

Added new exception code (please cleanup others!).

Signed-off-by: Roland Häder <roland@mxchange.org>

Simplified some code + fixed set/get usage (should be 'get' here).

Signed-off-by: Roland Häder <roland@mxchange.org>

Improved logger.

Signed-off-by: Roland Häder <roland@mxchange.org>

Tried to make debugger instance more singleton.

Signed-off-by: Roland Häder <roland@mxchange.org>

Improved some debug messages with method's name.

Signed-off-by: Roland Häder <roland@mxchange.org>

Log also whole data.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added exit; after all trigger_error() calls.

Signed-off-by: Roland Häder <roland@mxchange.org>

Was to noisy.

Signed-off-by: Roland Häder <roland@mxchange.org>

Commented out noisy debug lines.

Signed-off-by: Roland Häder <roland@mxchange.org>

Opps, forgot to return value + more logging.

Signed-off-by: Roland Häder <roland@mxchange.org>

Added more debug lines + missing super method.

Signed-off-by: Roland Häder <roland@mxchange.org>

Also this static. :-(

Signed-off-by: Roland Häder <roland@mxchange.org>